facing boring machine used for sale

Flat slider for drilling rig for mounting in the drilling spindle Tool holder SK50

Face and boring head NAREX Vhu 80 ( Vhu80 ) Mounting: SK50 in wooden case used, tested ! Dimensions: 420 x 410 x 155 mm

Face and boring head WMW C 100 - 40 TGL 32680 Mounting: SK40 Rotary chisel: Ø 20 mm used, tested ! Dimensions: 190 x 100 x 83 mm

Face and boring head WMW B71 TGL 2607.1 mount (machine side): SK40 with insert mount used, tested ! Dimensions (face and boring head): 216 x 65 x 70 mm

Facing and boring head PAGUS MK4 holder (machine side): MK4 with internal thread M14 x 2.0 Depth: 30 mm holder ( turning chisel ): 8 x 8 mm / 2x Ø 10 mm used, tested ! Dimensions: 202 x 57 x 55 mm

Face and boring head, with impact cutter PAGUS MK4 holder (machine side): MK4 with internal thread M16 x 2.0 Depth: 30 mm receptacle ( turning chisel ): 8 x 8 mm used, tested ! Dimensions: 285 x 95 x 110 mm

MKW Gathering Machine Rapid UT B3, with SFT 350, 8 stations, with circulating conveyor belt, with booklet/fold and front trimming

max. workpiece diameter:110 mm min. workpiece diameter:3 mm workpiece length:30 -400 mm total power requirement:11 kW

max. workpiece diameter:29 mm min. workpiece diameter:26 mm workpiece length:66 mm the system was originally delivered for the following workpiece sizes: diameter 26mm - 29mm length 65mm - 66mm Changing parts in the clamping device, handling, etc. would probably result in diameters of up to approx. Ø50mm Total length will probably be almost 400 mm possible with a few conversions. Also dependent on tool lengths, machining lengths on the component, etc.

max. workpiece diameter:160 mm min. workpiece diameter:20 mm workpiece length:3300 mm Sawn round material sections are clamped using prismatic hydraulic clamps left and right, and in one operation the two front surfaces can be milled to length and machined with a center hole and/or thread.

Tip height: 1250 mm Turning diameter: 2,500 mm over bed Centre distance: 4.000 mm Support motion: 750 mm longitudinal feeds 630 mm cross feeds Face plate: Ã? 1250 mm Spindle speed: 5.6-280 RPM. Spindle bore: 100 mm Workpiece weight: 10.000 kg Equipped with: -Floor plates 4.500 x 2.200 mm -Powered tailstock -Operating instructions Country of origin: Germany Engine power: 45 kW Machine weight: 18,000 kg Machine Lxwxh: 8,000 x 4,000 x 2,100 mm

Engine lathe NILES DP1/S3 Year of manufacture: 1988 Manufacturer: NILES Made in Germany Machine is almost not used, complete Technical Data: Height of center over bed: 800mm Max. processing diameter over bed: 1.600mm Max. processing diameter over support:1.250mm Min. work-piece diameter: 250mm Max. work-piece weight: 40.000kg Max. work-piece diameter: 1.250mm Internal spindle cone (1:10): 120mm Range of longitudinal support feeds: -1st row (stepless adjustment): 1-200mm/min -2st row (stepless adjustment): 36-3600mm/min Range od feeds of transversal slides: -1st row (stepless adjustment): 0,4-80mm/min -2st row (stepless adjustment): 14,4-1440mm/min Range of feeds of cross slides: -1st row (stepless adjustment): 0,12-25mm/min -2st row (stepless adjustment): 4,5-450mm/min Length of travel: -Of transversal slides: 760mm -Of cross slides: 500mm -Of incisive ca ...

Code 151295 Description Facinglathe with center Make WMW NILES Model DP 1 / S 2 Serial number 261 526 149 Year of make 1986 Max. centerheight over base plate 1250 mm Max. swing over base plate 2480 mm Max. swing in Gap 3100 mm Distance between centers 4000 mm Max. workpiece weight betw. centers 10.000 kgs Spindle bore 100 mm Movement slide ( max. ) 1000 ( + 750 ) mm crossslide 630 mm toolslide 200 mm 18 Speeds 5,6 – 280 rpm Motorpower 45 kW Total power 55 kVA Machine weight total ± 18000 kgs Accessoiries 4 chuck facingplate of Ø 1250 mm Condition Machine is in very good condition

Facing lathe DP 800

Manufacturer: Alfing Type: E II special machine Machine No.: 10-02541 Year of construction: 1976 Weight of the plant: approx. 43t General / technical data: Connecting rod stitch size: 400mm- 1.100mm Spindle thickness: depending on tools up to Ø350mm Installation area (l x w x h): approx. 6000 x 10000 x 3000mm Power Supply: 380V / 50Hz / 180kW Remark: ALFING special machine for fine spindling of connecting rod bearing seats for large engines. The machine has a clamping device that can be moved on the middle bed. The processing is done on 2 sides. Station 01 D with laterally movable carriage unit for adjusting the stitch size. The machine has a splash guard for wet machining. On the machine connecting rods of the Type 540 and Type 528 were produced (Deutz engines up to 300 liters displacement and 4000hp) Composed of: – 1 machine bed – 2 sled  ...

Turning diameter: 1900 mm Turning length (Z-axis): 2500 mm Spindle bore: 102 mm Turret positions: 0 Motor power: 45 HP/kW Chuck diameter: 500 mm Swing over bed Ø:        1900mm Swing over cross slide Ø:1520mm DBC Turning Length:      2500mm Spindle bore:            102mm Spindle power:           45kW Tailstock spindle Ø:     130Ø Stroke pinole:           300mm Spindle taper:           6Mk Length:                  6800mm Width:                   2800mm Height:                  2800mm Weight:                  10000kg

Head lathe, face lathe Manufacturer Ravensburg Type PKZ Center height 1140mm Center width 3000mm Turning diameter over base plate 2200mm Turning diameter via bed carriage 1700mm max. workpiece weight in the feed 3000kg workpiece weight between the tips 8000kg The machine is technically and optically in very good condition.

Turning diameter: 3000 mm Turning length (Z-axis): 3000 mm Spindle bore: 0 mm Turret positions: 0 Motor power: 0 HP/kW Chuck diameter: 0 mm CNC Model: 0 Max. thickness in 40 Kg/mm2 13 mm Max. thickness in 60 Kg/mm2 10 mm Max. workpiece:        3000Ø Maximum sheet thickness:13mm Max. dishing radius:   40mm Min. product Ø:        800 Length:                2875mm Width:                 990mm Height:                2010mm Weight:                2120kg  

Diameter: 630 mm. The 4-jaw mini lathe chuck body is made of cast iron, Bayonet cone 8.

Face plate diameter: 1.250mm Center height above foundation slab: 1,250mm Weight: 19t Power: 55Kw Max. torque on the face plate: 31,500Nm Maximum workpiece mass between centres: 16,000 kg Speed range: 2.24 – 224 rpm

turning diameter:2000 mm faceplate diameter:2000 mm max. workpiece weight:6000 (fliegend) kg weight of the machine ca.:30 t main drive motor:55 kW

Description HEYLIGENSTEDT face lathe KH35-CNC with control Sinumerik 840 D Details Serial No. 70000134 Turning diameter over bed carriage 900 mm Turning diameter over bed sheets 1,400 mm Center height above floor 1,480 mm Tip height over bed panels 680 mm Bed width 850 mm Bed height 550 mm Control SIN 840 D Main spindle diameter at front bearing 206 mm Main spindle bore 100 mm max. main spindle torque 15,000 Nm Three-phase main spindle motor 40 kW

Key data: 1800 mm, 3000 mm

Center width: 3000 mm Rotation diameter: 1800 mm above bed / 2800 mm above floor Workpiece weight: 8,000 kg max. Jaw chuck: Ø 1800 mm Speed range: 1.8 - 180 rpm. Spindle passage: 220 mm 3-Axis Digital Readout: Easson ES-14 Equipped with: - Motorized tailstock - Various tooling -Operating instructions Country of origin: Germany Engine power: 34 kW Machine weight: 21.000 kg

Large head lathe Automatic feed in both axes Face plate 800 mm Turning diameter max. approx. 1400 mm more technical data - see pictures

Description: x-way 725 mm z-way 400 mm ManualPlus 620 control unit Speed - level 1 5 - 250 rpm Speed - level 2 5 - 710 rpm Description: 4-fold steel holder PARAT 'manual' Manually operated face plate RÖHM 4 jaws Ø 1000 mm turning diameter over slide: 1,400 mm, faceplate diameter: 1,000 mm, total power requirement: 55 kW, weight approx.: 6,500 kg, Approx. Onsite Dimension. (l x w x h): 4,800 x 2,500 x 2,100 mm

:FB-15 | FB-20 | FB-25 | FB-30 turning diameter:1500|2000|2500|2500 mm faceplate diameter:1500|2000|2500|2500 mm turning length:330 mm max. workpiece length:450 mm bed width:450 mm max. workpiece weight -without tailstock:3000 kg width of cross cariage:250 mm spindle bore:155 (230 opt.) mm spindle nose:A2-11 (A2-15 opt.) spindle cone:7 MK spindle speed:4-600|4-600|4-400|4-400 1/min spindle speed steps:4 cross way of carriage:330 mm movement longitudinal:1000|1000|1500|1500 mm spindle drive:22 (29 opt.) kW servo motor X-axis:ß12/3000i 1.8kw |ß12/3000i 1.8kw|1FL6067 2.0kw|1FL6067 2.0kw servo motor Z-axis:ß22/3000i 3kw |ß22/3000i 3kw |1FL6092 3.5kw|1FL6092 3.5kw ball screw:Ø25mm x P5 x C3 (X-Achse) ball screw:Ø40mm x P10 x C5 (Z-Achse) mm rapid power traverse in X-and Z direction:6/8 m/min number of tools:4 tool post size:32x32 mm weight of the machine ca.:7000|7500|8000|10000 kg Mach ...

automatic CUTTING BORING and MOULDING machine BACCI TTF1 2TM . second hand machine working conditions : Excellent hydraulic drive of all the movements volt. 380/50 CE mark : YES Machine suitable for assembling part of chairs, tables, frames, furniture, wheelchair frames, etc. The BACCI TTF1 2TM performs the operations of cutting , milling and drilling at the end of the piece, either singularly or differently combined . the milling unit is composed of n.02 spindle moulders ( anti-splinter system ) machine composed by 3 working units : 1- Cutting unit : circular saw max.diam. mm.400 motor power Hp 3 2- Boring unit : boring head with 5 mandrins motor power Hp 3 3- Moulding unit . with automatic movement of the carriage on recirculating ball bearings n.02 spindle moulders (anti-splinter) motor power Hp 7,5 spindle diam. mm.35 hydraulic unit motor power Hp 2

Spindle speed continuously variable electronically 40-4000 RPM Thread cutting capacity max M8 Thread-cutting depth digital depth display digital speed display digital drill depth indicator Drilling depth stop on stop ring Feed / hand Table height with rack and pinion Duration / standard ALB ear performance steel Ã? 13 mm / 15 mm Depth 60 mm Projection 225 mm Column diameter 60 mm Usable table area (B x L) 330 x 250 mm Machine dimensions (W x D x H) 420 x 450 x 860 mm Engine dimensions (with VP) (W x D x H) 452 x 700 x 1130 mm Weight 62 kg max distance spindle/table/stand 300/ 360 mm Motor alternating current with frequency inverter 230 V, 0,54 kW Warranty: 3 years Free House including packaging (Germany only)

Manufacturer: UNION - Gemany Model: BFT 130 / 5 Condition: very good New in.: 1978 / 2000 , the machine was completely modernized for Company ALSTOM Control: conventional with Heidenhain Linear readings in 3 axes Technical details: Spindle diameter: 130 mm Spindle speed: 4.5 - 900 rpm Spindle cones: MORSE 5 ( the price of the machine will deliver free of charge adapter for ISO 50 ) X axis: 1600 mm Y axis: 1600 mm Z axis: 2500 mm W axis: 1000 mm Table: 1600 x 1400 mm Table Rotation: 360 Charging the table: 8000 kg Speed: 4.5 to 180 rpm Power range: 0.63 to 2000 mm / min Fast forward: 2 m / min Total required power: 35 kW Approximate Weight: 47000 kg EQUIPMENT: Heidenhain readings line in three axes, flat disc

Standard equipment Robust, high-quality and inclined rotation hood for easy reading of the speed LED lighting Easily adjustable and ergonomic drill depth stop Infinitely variable speed control Connection cable with plug (1,2 m) Undervoltage release Drill protection with Electr. Hedging Thermal overload protection Emergency off pushbutton Weight in kg: 30 Engine kW: 0.45 Rotary / alternating current: alternating current in V: 230V Speed 1/min: 250-3000 Drill capacity mm: 10/12 Thread cutting capacity: Max M6 -Steel Ã? 12 mm -Aluminum Ã? 20 mm -Softwood Ã? 40 mm -Drilling depth 50 mm -Throat depth 180 mm -Column diameter 50 mm -Usable table area (B x L) 180 x 260 mm -T - slot size number 2, distance 100 mm Dimensions width 12/20 mm Spindle B-16 Digital speed display Drilling depth indicator scale Drilling depth stop adjustable stop ring fast Feed by hand Steel &At ...

Table Type Boring Machine STANKO Model: 2A620 Technical Details: Spindle diameter: 90 mm Planning shield diameter: 630 mm Table working area: 1120 mm x 1250 mm Max table travel: Longitudinal: 1000 mm Transverse: 1250 mm Max headstock vertical travel: 1000 mm Spindle travel: 710 mm Spinle taper: 7: 24 Number of spindle speeds: 23 Main motor power: 10 kW Machine dimensions: Length: 6770 mm Width: 3900 mm Height: 3100 mm Net weight: 16000 T

conventional ´ traditional Tischbohrwerk, work spindle diameter 85 mm Traverse paths x 1000 mm, y 1000 mm, z 900 mm, ISO 40,. Clamping area table 1000 x 1120 mm with position indicator

AUTOMATIC BORING machine 35 spindles SCM TOP 35 second hand machine electric movement of boring head 0° / 90° technical details : n. 35 spindles center distance between spindles mm 32 center distance between first and last spindle of the drill head mm.1088 max. stroke of boring unit mm. 140 n.02 motors Hp 3 each one operating pressure atm 6-8 weight kg.800 volt. 380/50

-Spindle diameter 160 mm -Spindle SK 50 DIN 69871 - spindle power 90 kW -X-axis 16,000 mm -Y-axis 4.455 mm -W-axis 900 mm -Z-axis 800 mm

AUTOMATIC CUTTING , BORING and MOULDING machine type PADE 1000 N Machine suitable for assembling part of chairs, tables, frames, small furniture, wheelchair frames, etc. The PADE 1000 N performs the operations of Cutting , milling and drilling at the end of the piece, either singularly or differently combined. All movements of the machine are controlled by pneumatic devices. composed by 3 working units : 1- Cutting unit circular saw diam. mm.350 motor power hp 3 2- Boring unit boring head with 5 / 7 mandrins motor power Hp 3 max. working stroke of boring unit mm. 130 3- Moulding unit vertical spindle for moulder motor power Hp 5,5 spindle diam. mm.30 pneumatic sliding carriage volt. 380/50

M. No.: 2277

Table size 430 200 mm X trail 200 mm Y way 150 mm Speeds continuously variable motor 2 speed. 132-4600 RPM Throat depth 230 mm Quill stroke 110 mm

Speed 45-4000 RPM Fehlmann table 380 x 750 mm X/Y/Z 420/300/500 mm Motor-driven height adjustment of the drilling head

M. Number: 92238053

Number of boring units // Diameter boring units (mm) 9x 3.0 5x 3.5 1x 4.0 3x 4.5 6x 5.0 9x 5.5 31x 6.0 2x 6.5 19x 7.0 18x 8.0 1x 8.5 9x 9.0 5x 10.0 9x 11.0 2x 13.0 3x 14.0 1x 15.0 1x 16.0 2x 18.0 1x 19.0

Number of vertical independent spindles: 9 Number of horizontal spindles on axis X : (2+2) Number of horizontal spindle on axis Y: (1+1) N° 1 saw blade unit: (ø 100 mm) Router head 3,6 Kw ISO 30 - 12000/24000 rpm Max. thickness of the panel: 50 mm Control: Full Parametric Max weight of the panel: Kg 25 Max panel size: X ,Y 1100, Z 50 mm Min panel size: X 270,Y 150 (70 op.), Z 12mm Number of controlled axes: 3 Panel feeding speed: 25m/min Spindles speed rotation: 3600 rpm Saw blade speed rotation: 7000 rpm Air pressure: 7 bar Diameter of the dust extraction: ø 140 mm Exhaust air consuntion: (2000 mc/ora) - (30 m/s) Max drilling depth in horiz. on X and Y axis: 30 mm Max drilling depth in vertical: 45 mm Max horizontal diameter of the tools: 12 mm Max vertical diameter of the tools: 35 mm Motor power: 1,5 kw Max air consumption: 60 Nlt./min. Total power : 6,4 Kw  ...

Technical data Table length: 550 mm Table width: 320 mm Longitudinal travel (X-axis): 400 mm Transversal travel (y-axis): 250 mm Vertical travel (z axis): 400 mm Table load max.: 400 kg Drill capacity in steel: 20 mm Taper in spindle: MT: 2 Stroke of drilling spindle (Z-axis): 130 mm Bore diameter max.: 75 mm Distance table to spindle: 590 mm Spindle speeds: stepless from: 60 rpm up to: 3000 rpm Feeds: Drill spindle slide: number (steps): 2 from: 0.03 mm/r up to: 0.06 mm/r Voltage 50 Hz 3x: 380 Volt Spindle motor: 0.80 HP Machine´s weight about: 1100 kg Overall dimensions machine: Length: 1200 mm Width: 1150 mm Height: 1650 mm Various accessories: Lamp

Control: Heidenhain TNC 360 (1992) Table size: 1000 x 1000 mm Table size with front extension: 1345 x 1000 mm Table load max.: 2000 kg Distance spindle centre to column min/max.: 270 ~ 1270 mm Distance spindle nose to table min/max.: 0 - 1100 mm Distance between the upright columns: 1855 mm Table longitudinal travel : 1400 mm Boring ram carriage cross travel: 900 mm Crossrail vertical travel: 850 mm Boring spindle travel: 370 mm Spindle motor rating: 6 KW Spindle speed range: 30 - 1500 rpm Boring spindle diameter: 82 mm Spindle taper: MK 5 Borer diameter: 2 - 70 mm Boring tool diameter: 17 - 450 mm Boring diameter in solid ST 60: 45 mm Boring diameter in solid Cast iron: 70 mm Equipped with: Tooling; Accessories Machine overhauled and retrofitted in 1992 !; Very good

CNC Double column Coordinate Boring Machine with Deep Hole Drilling Support Kolb KBN G 120 Year of manufacture 1984 / Retrofitted with Heidenhain TNC 426 in 2006 Table size 4250 x 2200 mm Table load max. 14 t Table longitudinal travel X 3000 mm Main spindle cross travel Y 2180 mm Deep hole drilling support cross travel A - 2000 mm Spindle vertical travel Z 500 mm Distance between the columns 2640 mm; Spindle to table 100 - 1300 mm; Spindle diameter 224 mm Spindle drive motor rating 46 KW Spindle speeds 14 - 1400 rpm Spindle taper ISO 50 Drilling in steel ST60 : 100 mm diameter; Boring to 300 mm; Threading to M 125 x 3; Milling capacity 730 cm³/min.; Second support for Deep Hole Drilling Spindle speeds for BTA and ELB boring 315 - 3150 rpm High pressure cutting oil delivery to spindle Chip- and oil collection and separation via Centrifuge. Very good condition P ...

with an automatic working cycle, Max working width / stroke length of the oscillation 120 mm, depth of 80 mm, table tilt maximum 20 °, tool clamping diameter of 13 mm, drill diameter of 20 mm, spindle motor power 2.24 KW / Volt. 380/50 Hz, spindle speed 9,000 rpm, oscillating engine power 0.75 KW, oscillation adjustable from 120-240 strokes per minute, pneumatic workpiece clamping, 4 dust nozzle D = 80 mm, deep space - 1,000 mm, width 1300 mm, height 1250 mm, weight 500 KG

Small jig boring machine PERRIN type AVMachine -No: 367Table size: 500 x 275 mmLongitudinal path X: 410 mmTransverse Y: 280 mmHeadstock Z: 450 mmSpindle mount: MK 2Spindle speeds stepless: 50 - 3200 rpm.Quill stroke: 120 mmExternal dimensions approx.:1100 x 1000 x 1800 mmWith- Coordinate table PTX 40- electr. Contact stroke- mot. spindle head height adjustment- optical longitudinal and lateral displayused, in very good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

Technical data: -Table size 1600 x 370 mm -Work area of the axles -X (longitudinal) 1000 mm -Y (transverse) 320 mm -Z (vertical) 420 mm -Milling head left + right Tilt + Swivel - 9 table feeds 20-800 mm / min -Rapid traverse longitudinal / transverse 3000 mm/min -Rapid traverse vertical 1375 mm / min -maximum distance spindle - top 480 mm -min / max distance spindle Center / stand 450 mm -Tool holder ISO 50 - work spindle speeds in 12 levels adjustable 45-1400 RPM - coolant system - powered 400 V / 5,8 kW -Space requirement approx. B H 2100 x 2200 x D 2800 mm -Weight approx. 3500 kg

3-spindle line boring machine

Condition: Very good condition Available: Immediately