fabr used for sale

Univ.-Milling Machine Fabr. STANKO Type 675 MFabr. -No: 1727 built in 1972Table longitudinal path X: 320 mmUpper arm lateral travel Y: 200 mmTable perpendicular path Z: 300 mmSpindle mount: MK 416 spindle speeds: 50 - 1600 rpm.16 feeds X, Y and Z: 12.5 - 400 mm / minRapid traverse X, Y and Z: 935 mm / minvertical clamping surface: 500 x 200 mmAngle table clamping surface: 630 x 200 mmDrive power: 1.5 kWDimensions L x W x H approx: 1000 x 1200 x 1700 mmWeight approx: 770 kgWith- rapid traverse- Cooling device- different tool holdersATTENTION: Without vertical milling head used, in good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

High-performance milling spindle, unused                high speed milling spindle, unused   Machine model: MFWS 1709/24/72 VC HSK-A 63 Fabr.: Arnold Müller GmbH Kirchheim                                                                         FS 40-10-30-4- AOW                                                                                B 812LD 9913 - 319416 spindle speed/ infinitely variable: 150... 5300 rpm taper in spindle: SK 40        Power 16 kW Torque: 30 Nm 

High-performance milling spindle, unused                high speed milling spindle, unused  high speed milling spindle, unused/new   Machine model: MFWS 1709/24/47/VC HSK-A 63 Fabr.: Arnold Müller GmbH Kirchheim                                                            FS 40-10-30-4- AOW                                                                  B 812LD 1551 - 230 30 84 Speeds/ spindle speed/ infinitely variable: 150... 5300 rpm Wz recording /taper in spindle: SK 40        Power 16 kW Torque: 30 Nm 

Hydraul. Table scissors, used, ready for demonstration under electricity       hydraulic plate shearer, used , under power, ready for operation Type: XTSL 3016 Fabr./ make : Atlantic Year of construction/ year: 1993 Sheet thickness with the largest sheet width/ thickness at max. cutting length: 16 mm ( structural steel / mild steel ) 12 mm ( stainless steel / high grade steel) Cutting width/ cutting length: 3100 mm Weight/ weight: approx. 14 t Specification: Rear stop / backstop

No. 1859: 1 gebr. Universal toolmilling machine Fabr. MAHO, type MH 800, Bauj. 1972 Arb.-Ber.: 700 x 450 x 450 mm, Accessories: Universal recessed round table 1050 x 627 mm, Pinole feed gearbox 0.02-0.2 mm/U. Other: Spindle ISO-40, speed range 32-1600 rpm, Feeds 5-500 mm/min, rapid speed 1.4 (0.7) m/min. Table cross shift by hand 225 mm, Rotational movement of the table top 360° Table swivel/tilt each +- 30°. Space requirement approx. 2 x 3 x 3 m, weight approx. 3.3 tons.

Three-dimensional copy milling machine Fabr. SCRIPTA type probably SR 3 DXAFabr. -No: 1652 Year of construction not apparent, estimated around 1975 with BOSCH milling spindleapprox. 23 gear ratios from: 1 to 6Template table, clamping surface: 240 x 260 mmHeight adjustment: 150 mmMilling table clamping surface: 240 x 260 mmHeight adjustment sensitive: 58 mmMilling and copying device, height adjustable on round columngr. height between table and milling spindle approx .: 200 mmHorizontal adjustment: 140 mmelectrical connection for milling spindle, AC: 220 V.Space requirements measured over everything: 600 x 900 x 950 mmWeight approx .: 150 kgWith- Electrical device with speed control- pleadings:1 sentence standard font with letters and numbers1 dto in mirror writing with letters and numbers recessed1 set of normal pencil marks according to DIN 14511 dto deepened in mirror writing1 pleading ...

Precision Die Sinking Machine Fabr. MD PRONTO Dieburg Type 50.35Fabr. -No: 0-1.9.7, built in 12/1990Work table length x width: 650 x 350 mmMax. Workpiece dimensions Length x width x height: 900 x 550 x 400 mmTravel across X: 350 mmTravel length Y: 300 mmVertical travel Z: 180 + 200 mmMax. Travels of work table and machining head: 450 mmMachine weight approx. 1300 kgrequired footprint: 2700 x 1550 x 2450 mmExternal dimensions of the machine: 1280 x 1300 x 2100 mmTank size: 1100 x 550 x 400 mmTank volume: 240 l:With- Digital display- Depth shutdown- CO2 fire extinguishing system Gloria- Clamping system Hirschmann- separate power supplyas new, in very good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available ...

No. 3287: 1 gebr. Universal toolmilling machine Fabr. DECKEL, type FP 1, Bauj. 1988 with active digital display Arb.-Ber.: 300 x 160 x 340 mm, drive power: 1.5 kW Accessories: rigid angular table Table size 210 x 600 mm Universal table Counterholder Other: Speed range 2000 rpm Tool holder SK-40

No. 4105: 1 gebr. Hydraulic riypress Fabr. G + K, type SI 40/50, Bauj. 2000 Accessories: Table 500 x 400 mm Other: Pressure force max. 600 kN Impact stroke 150 mm Weight approx. 4500 kg

No. 4427: 1 gebr. Machine milling machine Fabr. DECKEL, type FP 4 L, Bauj. approx.82 with 3-axis digital display (1 digital display) Arb.-Ber.: 1200 x 400 mm, Accessories: Rigid angular table Div. Recordings SK 40 Other: Weight approx. 3.5 to Space requirement 3 x 2 x 2 m

No. 4896: 1 gebr. Vertical milling head Fabr. COLLET + ENGELHARD, type BN 100 ( BFfb 85 / 110 ),

CNC EDM machine Fabr. AGIE type Agietron 200 CSeries 03, device 04, list of devices 356804.5 built in 1987Travel X: 500 mmTravel Y: 350 mmTravel distance Z: 500 mmSupport surface: 800 x 630 mmMax. Workpiece dimensions: 1000 x 700 x 320 mmInner container dimensions: 1070 x 740 x 420 mmWorkpiece weight approx. 1200 kgMax. Weight of the electrode: 400 kgDistance table - quill: 180/680 mmPosition deviation (PA): 0.005 mmaverage position spread (PS): 0.003 mmmean inverse span (u): 0.002 mmResolution: 0.001 mmNumber of flushing connections: 10manual flushing: 1/20 l / minautomatic dosing spray: 8 / 3-800 ml / minControl mode: Multi-taskingSimultaneously controllable axis: 4Simultaneously controllable rotative and linear axes: C with X, Y, ZStorage Capacity: 3.5 , MS-DOS, 720KBScreen: color 14 Interface: RS 232 / CV 24Rated current: 60 ARemoval rate: 450/590 mm3 / minNumber of channels: 1Agiepu ...

No. 1909: 1 gebr. Universal milling machine Fabr. HURON, type MU-55, Bauj. 1984 with 3-axis active digital display TNC-114 Arb.-Ber.: 1300 x 1000 x 550 mm, drive power: 9 kW Accessories: Table clamping surface 1635 x 700 mm, coolant device, Universal milling head infinitely adjustable feeds via DC drive Other: Speed range 30-2060 rpm Spindle holder SK-40 Space requirement approx. 3.5 x 4.5 x 1.75 m, weight approx. 4.8 tons.

Die sinking machine Fabr. AEG-Elotherm type Elbomat 222 WMash. -No: 224.4009with generator EP 60 C 2145172 and filter F 11 VYear of construction 1980Adjustment X: 300 mmAdjustment Y: 200 mmReading accuracy: 0.01 mmTable load max .: 400 kgTable dimensions: 580 x 310 mmTank / processing room: 700 x 450 x 265 mmMax. Fluid level above workpiece carrier: 250 mmTank volume: 70 lWorking head angle: 200 mmHead support: 200 kpMax. Distance between working head and table: 480 mmDepth gauge: 50 mmDepth-of-cut accuracy: + - 0.02 mmExternal dimensions of the machine: 1250 x 1225 x 2150 mmWeight approx.: 1.3 tWith- mot. Coarse adjustment of the working head / W axis- Eloplus Generaotr type EP 60 C- Heidenhain positioning controller TNC 1213 R Orbicut midi tromes- Adapter slot- H 400 system- Filter F 11Vused, in very good conditionPrice on request.Delivery: ex warehouse or location free loading truck.P ...

No. 3701: 1 gebr. Vertical consol milling machine Fabr. HESSAPP, type HC 50 et, Bauj. 1981 with route control Heidenhain TNC 135 / Indramat Arb.-Ber.: 600 x 350 x 500 mm, drive power: 2.3 kW Accessories: Table area 1180 x 330 mm Other: Speed range 70 - 6000 rpm

No. 1251: 1 gebr. Saw blade grinding machine Fabr. FULL, type CHHT 20 H, Bauj. 1984 with coolant device

Hydraulic double acting pipe pulling and reducing machine Fabr. OWN CONSTRUCTIONFor connection of outer and inner tubeConsisting of:1.) Vertical hydraulic double acting pressxa0xa0xa0xa0xa0 Table size: 565 x 450 mmxa0xa0xa0xa0xa0 Installation height: 800 mmxa0xa0xa0xa0xa0 Distance between the stands: 700 mmxa0xa0xa0xa0xa0 lateral. Passage: 285 x 200 mmxa0xa0xa0xa0xa0 Piston diameter: 90 mmxa0xa0xa0xa0xa0 External dimensions: 1400 x 650 x 2100 mmwith separate hydraulics2.) Horizontal hydraulic double-acting pressxa0xa0xa0xa0xa0 Power: 450 atmxa0xa0xa0xa0xa0 Installation height: 800 mmxa0xa0xa0xa0xa0 Cylinder diameter: 100 mmxa0xa0xa0xa0xa0 External dimensions: 2400 x 1500 x 1200/3000 mmwith attached crane jib and STEEL chain hoist 600 kg3.) large lot of tools (about 30 pieces)xa0xa0xa0xa0 from 21.3 to 407 mmxa0xa0xa0xa0xa0 with intermediate sizes of 50, 57, 60, 60.3 mmusedPrice on request ...

No. 4620: 1 gebr. Guide and pull spindle lathe Fabr. BOLEY, Type 5 LZ, Arb.-Ber.: SpH 130 x 500 mm, Other: Spindle speeds: in 22 stages 28 - 2550 min-1 Space requirement: 1.5 x 0.9 x 1.25 m Weight ca 800 kg

0312: 1 gebr. Riprize machine Fabr. HANG, Type 105 VDS, Bauj. 1959 Arb.-Ber.: Riceodiameter 3 mm, Drive power: 0 kW

2886: 1 gebr. Difiting press 200 kN Fabr. REIS, type TUS 60 OK 20, Bauj. 1991 with hydr. Control Arb.-Ber.: Stroke approx. 700 mm, drive power: 7.5 kW Accessories: extendable table 670 x 570 mm, swing-out top plate 670 x 570 mm, Mounting height 740 mm Other: Passage between the columns 620 mm, Space requirement L/W/H 1870 x 1620 x 3000 mm, Weight approx. 3.5 tons. very good condition

Hydr. Mobile crimping tool Fabr. ECKOLD type MZ 11Fabr. -No: 1176/1918 with mobile hydraulic aggregate HA 500 / 2-20.26Max. Pressure force: 30 kNHorizontal reach: 22 mmVertical projection: 29 mmMax. Sheet thickness: 3.0 mmOutside dimensions approx: 236 x 140 x 178 mmDrive power unit: 3,1 kWWith- 6.0 m hydraulic connection hose- Mobile hydraulic unit ECKOLD HA 500 / 2-20.26xa0xa0 Machine -No: 711/652, built in 1991very little used, in very good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

No. 3421: 1 gebr. Tool press Fabr. SCHÖN, type SH-PZ 250, Bauj. 1979 Arb.-Ber.: Pressure power 250 to mm, drive power: .22 kW Accessories: Table 500 x 500 Other: Single stroke 2-hand Single stroke foot switch automatic continuous running set up and tap

No. 3554: 1 gebr. Table scissors Fabr. SCHARRINGHAUSEN, type HS/S, Bauj. 1952 Arb.-Ber.: 2050 x 2 mm, Other: adjustable rear stop 600 mm good condition

Hydraulic Single Planing Machine Fabr. WALDRICH COBURG Type 2E 1515Com. -No: 2110108 built in 1966combined gantry and milling machine with removable milling attachmentPlaner length: 2000 mmPlaning width: 900 mmPlaning height: 750 mmTable surface: 2000 x 650 mmpermissible workpiece weight: 1550 kgmilling head11 spindle speeds: 112 - 1120 rpmPower: 1.5 kWSpeed: 960 rpm.Tool holder: MK 3Max. Cutter diameter: 63 mmAxial adjustment of the milling head: 130 mmVertical adjustment: 170 mmAdjustment of the milling head on the boom: 630 mmtable driveMotor power of the feed pump: 3 kWFeed rates stepless Flow: 10 - 4200 mm / minReturn: 10 - 2800 mm / minCreep speed: 5 mm / minLongitudinal adjustment: 2000 mmWith- milling attachment- Sanding attachment- Planing steel holder- swiveling control panel- rapid traverse- mot. transom height adjustment- Separate control cabinet- hydr. speed adjustmentused,  ...

Eccentric press fabr. HELMERDING type PEP 12/15 BMasch. -No: 831184, year of construction 1988Technical specifications:Nominal force: 12 tMax. Ram stroke: 60 mmThroat: 160 mmTable surface area: 315 x 400 mmAdjustment of the ram: 40 mmMax. Strokes: 180 rpm.Ram area: 100 x 125 mmDrive power: 1.1 kWWith- 2 hand release- foot switch- separate control cabinet- Ortlinghaus additional brake and hydr. Multi-plate clutch- according to UVVused in good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

No. 4926: 1 gebr. NC Round Table Fabr. DECKEL, type 2238 002600, with axis card for dialog 4 Arb.-Ber.: Table 800 x 600 mm, Other: Table load approx. 250 kg Clamping - grooves 16H7 Weight approx. 280 kg Space requirement / transport dimension approx. 1100 x 750 mm

No. 4877: 1 gebr. Single-stand hydraulic press Fabr. EITEL, Type T 6.3, Bauj. 1973

Hydr. Double Column Press Fabr. KINDSMÜLLER Type KP 50 EMachine -No: 355, built in 1972Printing capacity max.:50 tStroke of the pistons: 400 mmRam speed before: 40 mm / secRam speed back: 85 mm / secPiston diameter: 120 mmTable size: 635 x 455 mmPassage between the uprights: 750 mmInstallation height: 740 mmTank capacity: 150 lDrive power: 4 kWExternal dimensions: 1200 x 1100 x 2400 mmWith- Two-hand releaseused, in good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

N° 0214: 1 gebr. Hydraulic quick-stroke two-stand press Fabr. SMG, Type DS 63, Bauj. 1984 with pressing force 630 kN, retraction force 51 kN Arb.-Ber.: Table area 660 x 460 mm, drive power: 15 kW Accessories: The press was upgraded to UVV 11.064 VBG 7n5.2 in 1991. Other: Light width between the stands 680 mm, max. distance between table top and pestle 385 mm, ejector force 15 kN largest pestle stroke 150 mm.

Pneum. Single Column C-Form Press Fabr. TOX Pressotechnik Type S50.4.80.6 / PC 50Year of construction 1989Pressing force: 440 kN / 44 tTotal stroke: 80 mmof which power stroke: 6.0 mmCompressed air connection: 6.0 barTable size: 596 x 496 mmInstallation height: 500 mmDiarrhea hole: 120 mmWith- Press frame PC 50- Power package S50.4.80.6- 2-column guided ram plate- Underframe U 50- protective cover SH 50- Press control ST 03 3/4 - Setup mode = additional deviceused, in very good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

0916: 1 gebr. Universal tool and flat grinding machine Fabr. HEMBRUG Arb.-Ber.: 500 x 200 x 260 mm, Accessories: Grinding dust extraction, tool cabinet Other: Grinding table swivel 60°, grinding spindle swivel 360°.

No. 4929: 1 gebr. Eccentric press 22 - 26 to Fabr. EBU, type 25, with stroke number 130 min-1 Arb.-Ber.: Stroke adjustment 80 mm,

Hydr. High-speed single-column press Fabr. DUNKES type HZS 40Machine -No: H 77-581, built in 1981Press force: 40 tOperating pressure: 270 barStroke: 150 mmInstallation height: 400 mmOutreach: 280 mmRapid traverse: 400 mm / sec.Rapid traverse to: 400 mm / sec.Pressing under full load: 14 mm / sec.Table height: 820 mmTable surface: 600 x 515 mmDiarrhea hole in the table: 100 mm Drm.Drive power: 7.5 kWWeight: 3.1 tOil filling: 230 lExternal dimensions: 850 x 1200 x 2390 mmWith- Cutting impact damping- Safety 2-hand control- self-holding with rapid traverse shutdown- Electric return stroke limitation- Setup tip circuit- Fully automatic workflow- Emergency stop switch- stepless force preselection- graduated Adj. mech. depth stop- Switching in the lower stroke rangexa0xa0xa0 Lift and time changeoverxa0xa0xa0 Lift and pressure changeover- separate hydraulics for drawing cushionsused, in good co ...

No. 4428: 1 gebr. Horizontal band saw Fabr. SAMUR, type S-1000 V, Bauj. 1966 Arb.-Ber.: 800 mm throughlet width, Accessories: Table Dimensions: 610 x 610 mm Table extension on the left with welding device Other: Cutting height 350 mm Cutting speed 20-800 mm Sheet length: 4,550 mm. Blade width: 4 to 15 mm. Speed infinitely variable Cutting speed: 23-711 m / min Electric motor 380 V

Hydraulic four-roll plate bending machine Fabr. Haeusler type VRM HY 2000-6Machine number: 1186-1968, built in 1968Max. Working width approx. 2040 mmMax. Druchgang approx: 2100 mmMax. Sheet thickness with bend: 6 mmUpper and lower roller diameter each approx: 250 mmSide roller diameter approx.: 200 mmStroke of rollers approx. Each: 220 mm2 working speedsTotal drive power approx: 18 KWWorking height approx: 1300 mmSpace required: L 5450 x D 1900 x H1930 mmWeight approx: 10500 kgWith:- Both side rollers with mot. delivery for bending + conical bending- hydr. Folding bearing for removing the sheet metal- Slip clutch- Right-left purchase- separate control panelused, in good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are ...

NC-controlled fully automatic circular saw Fabr. KALTENBACH Type KKS 400 NA / FMAFabr. -Nr: 104427 Year 1984Saw blade diameter: 400 mmCutting area round: 130 mmCutting area square: 120 mmCutting area flat: 315 x 40 mmU-profiles: 240 x 85 mmU-profiles 45 °: 180 x 70 mmCutting speed: 13/25 m / minSaw blade feed speed: 10-1200 mmRapid return of the saw blade: 1500 mm / minDrive power: 3.2 / 4.1 kWExternal dimensions: 12000 x 2500 x 1850 mmWeight without flat magazine approx .: 1350 kgWith- Flat magazine for material output lengths 1500 - 6000 mm- NC control without screen- Restelager before roller conveyor for remnants 1500 - 6000 mm in lengthused, in good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offerand are always available ...

No. 2456: 1 gebr. Universal toolmilling machine Fabr. MAHO, type MH 800, Bauj. 1973 with 3-axis digital display Mitutojo Arb.-Ber.: 700 x 450 x 450 mm, drive power: 4 kW Accessories: Universal recessed round table 1050 x 627 mm Pinole feed gearbox 0.02 - 2 mm/U Other: Spindle ISO 40, speed range 32 - 1600 rpm, Feeds 5-500 mm/min, rapid speed 1.4 (0.7)m/min Table cross shift by hand 225 mm, Rotational movement of the table top 360° Table swivel/tilteach +- 30° Space requirement approx. 2 x 3 x 3 m, weight approx. 3.3 tons.

Hydraulic Miter Metal Cold Circular Semiautomatic Saw Fabr. KALTENBACH Type KKS 401 HMachine -No: 112710 built in 1991Saw blade size: 375/400/425 mmCutting width max .: 5 mmCutting speed: 10/20 m / minCutting area round: 130 mmxa0xa0xa0 90 ° square: 120 mmxa0xa0xa0 45 ° square: 110 x 110 mmxa0xa0xa0 90 ° flat: 250 x 40 mmxa0xa0xa0 45 ° flat: 170 x 50 mmSaw blade feed speed: 0 - 1200 mm / minDrive power: 1.7 / 2.6 kWOutside dimensions: 1170 x 1070 x 1960 mmWeight (machine only): 1350 kglittle used, in good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

Metal circular saw Fabr. MEP type Tiger 300Machine -No: 004968 / RPDCUTTING AREAS:0 ° round: 90 mm0 ° square: 85 x 85 mm0 ° flat: 150 x 70 mm45 ° round: 90 mm45 ° square: 85 x 85 mm45 ° flat: 90 x 60 mm60 ° round left: 60 mm60 ° square left: 60 x 60 mm60 ° flat left: 60 x 80 mmSaw blade size: 300 x 32 x 2.5 mm2 speeds: 30/60 rpm.Vise opening: 155 mmDrive power: 1.5 / 1.8 kWWeight approx: 215 kgWith- Underframe- Cooling deviceused, in good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

No. 3487 & 3489: 1 gebr. Additional table (suitable for rigid table type 2710 ) for lid - slanted bed models FP 2/3 L/LV FP 41/42 Fabr. DECKEL, type 2410, with weight approx. 180 kg Arb.-Ber.: Clamping surface 1200 x 370 mm,

Veneer saw Fabr. Mayer with 3500 mm cutting length , with planing unit for re-enforeconclusion with rear width stop

Metal Circular Saw Fabr. OPTIONS Type WK IIIFabr. -No: 10624 Year 1981Saw blade diameter max: 350 mmCutting area 90 ° round: 125 mmxa0xa0xa0 90 ° rectangle: 240 x 70 mmxa0xa0xa0 45 ° rectangle: 120 x 70 mm2 cutting speeds: 30/70 rpm.Motor power: 1.0 / 1.6 kWExternal dimensions: 630 x 600 x 1500 mmWeight: 540 kgWith- Saw blade can be adjusted by 360 °- Longitudinal thrusts and every miter possible- Cooling deviceused, in good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

Offer via gebr. Pipe separation and chamfering machine Fabr. GF Type AVM RA6 Technical data: Outer pipe diameter 75-183mm Wall thickness 1 - 10 mm Power connection 200 - 240 V / 50 Hz stepless speed Speed levels electronically 1 - 6 Power 1600W used, in good condition.

No. 4973: 1 gebr. Hydraulic unit 250 l / 60 bar / 40 l/min Fabr. UNIVERSAL Hydraulics, Bauj. 1987 with formerly HEYLIGENSTAEDT Heynumat 10 Arb.-Ber.: approx. 900 x 650 x 1500 mm, drive power: 5.5 kW Other: approx. 300kg (estimated)

Offer via gebr. Pipe cutting- chamfering machine Fabr. GF GEORG FISCHER Type RA41 Built in 2009 Technical data: Outer pipe diameter 15-120mm Wall thickness 1 - 10 mm Power connection 200 - 240 V / 50 Hz stepless speed 150 - 270 rpm. Speed levels electronically 1 - 6 Power 1600 W incl. pipe feeding unit height-adjustable Used

Hydraulic hack saw Fabr. KLAEGER type HK 265Fabr. -No: 125014 built in 1993Cutting area 90 ° round: 265 mm90 ° flat: 220x260 / 225 x 225 mm45 ° round: 160 mm45 ° flat: 160 x 240 mmSaw blade size: 400 x 35 x 2 mmStroke length: 105 mmDouble strokes: 74/148 h / minCutting speed: 15.5 / 31 m / minFeed control: hydraulicDrive power: 1.6 / 1.9 kWDimensions L x W x H: 1400 x 500 x 900 mmWeight approx .:290 kgWith- hydr. Withdrawal in idle stroke- hydr. Eilhochgang- accelerated return stroke- miter vice- automatic shutdown- Cooling deviceused, from an operational resolution, in good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

Offer via gebr. Pipe cutting- chamfering machine Fabr. GF GEORG FISCHER Type RA41 Built in 2009 Technical data: Outer pipe diameter 15-120mm Wall thickness 1 - 10 mm Power connection 200 - 240 V / 50 Hz stepless speed 150 - 270 rpm. Speed levels electronically 1 - 6 Power 1600 W incl. pipe feeding unit height-adjustable Used

Vertical bandsaw Fabr. Mössner type SSF 1050Machine -No: 25331 Year 1982xa0xa0xa0xa0xa0Technical specifications:Projection: 1050 mmCutting height: 550 mmRoll diameter: 500 mmHeight clearance table / band saw guide: 530 mmProjection in width over 2 rolls: 485 mm: over 3 rolls: 1050 mmSaw band length over 2 rolls: 3920 mm:: over 3 rolls: 5250 mmSaw band width :: 3 - 20 mmTable size (worktable): 750 x 1050 mmTable size (additional table): 450 x 450 mmTable tilt :: 2 u. 4 sided 15 inclinablestepless cutting speed: 15 - 940 m / min.Cutting speed overdrive: 2350 m / min.Max. Melting height: 15 mmDrive power: 4.0 kWWeight approx: 1740 kgExternal dimensions approx: 2100 x 1000 x 2100 mmWith- Band saw blade welder Ideal BS 25- scissors and grinding motor- Stepless saw blade speed via PIV control gearbox- Voltage indicator hydr.- Air pump- exchangeable aluminum castors with vulcanised hard rubber ...

Manual swing bending machine Fabr. Schechtl type UKV 2002 x 1 Masch. -No: 6412 Year of construction 1995 with segmented bending tools Technical specifications Working width 2000 mm Max. Tin thickness steel 1.0 mm Max. Sheet metal thickness ALU 1.5 mm Max. Tin thickness Va 0.70 mm Opening width of the upper wang approx. 100 mm Outer dimensions L x B x H 2600 x 800 x 1200 mm Weight approx. 625 kg with - split tools up and down - Weight equalization for top and bending cheek - Foot pedal for close the top cheek - Scale for bending angle left and right - Manual background Used, in good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

Offer via gebr. Pipe cutting- chamfering machine Fabr. GF GEORG FISCHER Type RA41 Built in 2001 Technical data: Outer pipe diameter 15-120mm Wall thickness 1 - 10 mm Power connection 200 - 240 V / 50 Hz stepless speed 150 - 270 rpm. Speed levels electronically 1 - 6 Power 1600 W incl. pipe feeding unit height-adjustable Used