136,226 used machines on RESALE, but how to find them? Machine Search
used cabinet press Manufacturer: Maschinenfabrik Bermatingen GmbH & Co. Type: DIXI 30 S Year of construction: 2009 Serial No.: 109138 specifications: Pressing force: 30 t Filling opening: 1,200 x 670 mm (W x H) Height from the ground: approx. 940 mm Split egg filling opening: 1,070 x 260 mm Height from the ground: 1,310 mm Bale size: 1,200 x 800 x 800 - 1,100 mm Bale weight: up to 270 - 360 kg Drive power: 7.5 kW Cycle time: approx. 29 sec. Pressing time: approx. 14 sec. Binding: 4-fold - vertical with poly strap Machine dimensions: 1,600 x 1,300 x 3,170 mm (W x D x H) Machine weight: 2,180 kg Transport height: 2,240 mm (Subject to errors in the technical data)
used cabinet press Manufacturer: Maschinenfabrik Bermatingen GmbH & Co. Type: DIXI 18 S Year of construction: 2013 Serial No.: 116398 Specifications: Pressing force: 18t Engine: 4 kW Connection voltage: 400/50 V/Hz Cycle time: 22 s Pressing time: 12 s Insertion opening: W x H 107 x 62 cm Height from floor: 98 cm Bale ejected: W x H x D approx. 110 x 70 x 70-80 cm Bale height adjustable Bale weight: 120 – 180 kg depending on the material to be pressed Machine width: 152 cm Machine depth: 95 cm Machine height: 197 cm Weight: 850 kg (Subject to errors in the technical data)
used cabinet press Manufacturer: Maschinenfabrik Bermatingen GmbH & Co. Type: DIXI 25 S Year of construction: 2012 Serial No.: 1113653 specifications: Pressing force: 25 t Filling opening: 1,200 x 670 mm (W x H) Height from the ground: approx. 940 mm Split egg filling opening: 1,070 x 260 mm Bale size: 1,200 x 800 x max. 800 mm Bale weight: up to 250 - 320 kg Drive power: 5.5 kW Cycle time: approx. 24 sec. Pressing time: approx. 13 sec. Binding: 4-fold - vertical with poly strap Machine dimensions: 1,600 x 1,300 x 3,170 mm (W x D x H) Machine weight: 2,180 kg Transport height: 2,240 mm (Subject to errors in the technical data)
max. temperature: 150-500 Grad basket dimensions: 300x210x460 mm total power requirement: 2.6 kW weight of the machine ca.: 80 kg dimensions of the machine ca.: 0.80x0.60x0.95 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Roller bearings, ball bearings, barrel bearings, bearings, rolling bearings -Outer diameter: 210 mm -Width: 53 mm -Inner diameter: 140 mm -Weight 6.3 kg
spherical roller bearing -Type: 22218 E -Weight: 3.5 kg -Outer diameter: 160 mm -Width: 40 mm -Inner diameter: 90 mm
Key data: 110 mm
HBM HWCa-110, new in 1965
General SKU268N284 MakeKLEIN VAKUUMTECHNIK GMBH No.8765 Year of construction2000 Mounted on framecheck Pressure Vacuum possiblecheck Main Features MaterialStainless steel Volume235 Ltr. Max.temp.180 °C Specified Features - Drying oven Vacuum drying ovencheck Max. temperature180 Number of compartments:1 Capacity235 Ltr Internal width600mm Internal depth650mm Internal height600mm Electric heatingcheck With trays2 MaterialStainless steel General LocationBarneveld Floorspace1,2 x 0,9 M Total height2,0 M Extra Specificationswith vacuum pump, brand Leybold, type D16BConsumer wastePaints & coatingsDrying ovensPowdered foodsGeneric medicinesTea, herbs & coffeeFine chemicalsStarchOther chemicalRubberBiotechnologyAgrochemicalsSpicesPlastic & polymersCatalysts & fillersFeed additivesOrganicsPaper & otherDetergent & surf.Other pharmaceuticsCosmeticsE-waste & metalFood ad ...
Interchangeable jaws, top jaws, three-jaw chucks, segment jaws, clamping jaws, step block jaws, step top jaws, block jaws -Manufacturer: Fabryka Przyrzadow, 3-piece soft top jaw set -Type: PUTm-M 200 -Width: 25 mm -Number: 5x jaw sets available -Price per piece -Dimensions carton: 80/90 / H75 mm -Total weight: 2.3 kg / set
Scheffer Indoor Crane System 500 kg For sale is a high-quality, fully functional indoor crane system (single-girder overhead crane) from the premium manufacturer Scheffer Krantechnik, equipped with first-class quality components from Demag. The system has a synchronous double hoist (tandem operation) with two independently movable Demag electric trolleys. This design is ideal for lifting long, bulky or heavy goods (such as profiles, pipes or plates) absolutely horizontally and safely at two points at the same time. Technical data for the load capacity & performance: Total lifting capacity of the system: 500 kg (0.5 tons) with simultaneous use of both hoists Load capacity per hoist: 250 kg individually Manufacturer's plate specification: 2 x 2 x 0.125 t (2 hoists in 2-strand operation with a base load of 125 kg each) Crane manufacturer: Scheffer Krantechnik (Leading ...
This 7-axis Mazak 3D Fabri Gear 150 was manufactured in 2005. It features an impressive X-axis travel of 8750 mm, Y-axis travel of 1270 mm, and Z-axis travel of 375 mm. The machine is equipped with a powerful 2.5 kW resonator, providing efficient cutting capabilities. If you are looking to get high-quality tube cutting capabilities, consider the Mazak 3D Fabri Gear 150 machine we have for sale. Contact us for further details.
Fabric grinding belts of M3 1260 mm x 13 mm P150 for metalworking
ZIMMER THERMOCURE TEXTILE FABRIC CURING MACHINE / EDGER High Capacity Hot Air Dryer MAKE : ZIMMER TYPE : THERMOCURE UHD 3 YOC : 2005 WW : 2000 mm CONTENT : 240 m HEATING : HOT OIL GAS FIRED WITH THERMAL OIL BOILER TEMPR : MAX. 250 C
Fabric sliders: o Various nominal diameters available o Versions: Mechanical and pneumatic o Robust and durable for industrial applications Knob: o Precise control of flow rates o Choice of mechanical or pneumatic Condition: Mint
A fabric spreading machine Kuris is available. Length: 13000mm, belt width: 1800mm, width: 2150mm. Includes Pionier Super PC Electronic control and unwinding device. Documentation available. An on-site inspection is possible.
Kraus and Reichert Kuris KVS700 Bumper Knife Machine Fabric Cutter Textile Item condition: Used and tested for function. _RD 6kg More textile machines - new and used - can be found in our shop! International shipping costs on request!
The plant consists of two production units: Production Line B and Pre-Mix Unit 5 (MA5). PRODUCTION LINE B Production Line B is a complete nonwoven needlepunch line consisting of the following components listed in process order. 1. Suction / Filter Station (Filterstation) Function: Fiber dust extraction and air filtration for the production line. 2. Feed Shaft Manufacturer: Spinnbau Bremen Machine length: 3,970 mm Machine width: 2,600 mm Machine height: 6,233 mm 3. Belt Scale with Vibrating Shaft - Protec Vibrating Shaft: Length: 880 mm Width: 2,800 mm Height: 1,500 mm Weight approx.: 870 kg Belt Scale: Length: 550 mm Width: 3,000 mm Height: 700 mm Weight approx.: 550 kg Power supply: 3NAC 400V 50Hz 20A Description: The vibrating shaft produces a uniform fiber feed. The belt scale measures the weight of the fiber material being transported and regulates the feed spee ...
1 BREITENBACH type Benjamin 3, 5-D high-performance continuous dyeing and finishing machine for elastic and rigid narrow fabrics (and bands, ribbons or tapes) made of polyamide, cotton or viscose year 1999 composed of: foulard dyeing padder roller width 300 mm with electrically heated vat, steamer capacity 34 m, 5 washing boxes each with squeezing padder and indirect steam heating, chemical finishing padder, hot air dryer capacity 50 m gas heated, exit for 4 tapes
A custom-built multi-stage nonwoven line for the production of two-layer or multilayer technical nonwovens made of synthetic or natural fibers with free-flowing materials such as herbs or seeds is available. Material weight range: approx. 100g/m²-1000g/m², needle machine manufacturer: Dilo, max. roll width: 2100mm, max. production speed: 200m/h, needling capacity: approx. 1200strokes/min, main motor: 45kW Siemens, total system dimensions X/Y/Z: approx. 10m/4.5m/4.5m. Process steps: nonwoven web feeding, carrier nonwoven feeding, material feeding (herbs), material dosing, material distribution, top nonwoven laydown, needle station, cutting/to length cutting, winding/rewinding, dust extraction. Documentation available. An on-site inspection is possible. The line is complete including accessories, peripheral equipment and a small sample needle machine.
A complete nonwoven fabric production line including peripheral equipment and a complete pre-blending line is available. 1) Pre-blending line with carding opener Houget Duesberg Bosson, year of construction: 1972, working width: 1500mm, drum: 1, worker-stripper pairs: 3, doffer: 1, feed rollers: 2, total line dimensions X/Y/Z: approx. 11000mm/1800mm/3100mm, operating hours: approx. 16414h, including feed table and bale opener. 2) Filling chute Spinnbau Bremen, year of construction: 1989, machine dimensions X/Y/Z: approx. 4000mm/2600mm/6250mm. 3) Weighing conveyor with vibrating chute Protec. 4) Card Hergeth, year of construction: 1990, working width: 2500mm, feed rollers: 2, feed roller diameter: 94mm, licker-in roller diameter: 413mm/550mm, worker-stripper roller diameter: 219mm/123mm, transfer roller diameter: 550mm, main cylinder diameter: 1500mm, doffer diameter: 850mm, compaction ro ...
Manufacturer: Boshite Model: TD-100 Type:Quilting Machine Voltage: AC 100-240V Frequency: 50/60 H Find more here - .ucymachines/ Contact us at - sales@ucymachines
Inv. Num. : 9116 Type: PARAGON CUTTER Producer: GERBER Created: 2022 Parameters: Load capacity: 100 kg Max. material width: 2200 mm Top table length: 16800 mm Equipment: GERBER XLs125 SPREADER
Manufacturer: Klieverik Type: GTC-3400 Year of Manufacture: 2005 CE Mark: Yes Working width: 3,400 mm Voltage: 400 V / 50 Hz Current: 27 A Find more here - .ucymachines/ Contact us at - sales@ucymachines
A low-tension fabric inspection and shearing machine Unglaub with newly covered transport rollers is available. Working width: 1900mm, material thickness range: 0.2mm-3mm, max. inspection material speed: 40m/min, inspection material groups: I-IV. Documentation available. An on-site inspection is possible.
A fabric inspection machine is offered. Working width: approx. 2000mm, display: digital length counter, inspection table: integrated backlight, control: conventional via control cabinet, function: winding, unwinding and inspecting fabric webs, control: conventional. Equipped with illuminated transmission screen, digital meter counter, control cabinet with push-button control, guide and winding rollers. Weight: approx. 850kg, overall dimensions X/Y/Z: approx. 2800mm/1600mm/1900mm. Inspection possible by arrangement.
Six identical Demsan fabric doubling and winding machines are offered. Max. fabric width: 2000mm, fabric infeed: from roll and in open width, fabric delivery book/roll: 1000mm, double folded, max. operating speed: 60m/min, operating direction: forward, control: Hitech touch panel. Machine dimensions X/Y/Z: 4000mm/3100mm/2600mm, weight: approx. 2390kg. Equipped with fabric tension control, electronic length measuring system with encoder, calibration function, RS-232 interface, end-of-fabric photocell, photocell-controlled fabric catcher and centering system, dancer roller mechanism, Argox thermal printer, photocell-controlled edge guiding system, motorized fabric guide adjustment, AC geared motors, frequency converters and pneumatic opening unit. Four machines were manufactured in 2017, and two machines were manufactured in 2016. Documentation available. Inspection possible by arrangement ...
Technical details Type: Straight knife textile cutting machine Model: 9226 Power supply: 220 V Current: 10 A Configuration: - Vertical reciprocating knife blade - Integrated blade sharpening mechanism - Blade guide assembly - Carrying handle - Fixed support stand - Electrical safety switch Application: - Garment manufacturing - Textile production - Multi-layer fabric cutting - Leather cutting - Technical textile processing - Pattern cutting operations Construction: - Heavy-duty industrial cutting head - Bench-mounted configuration - Integrated sharpening system Dimensions: - Length: Approx. 350 mm - Width: Approx. 250 mm - Height: Approx. 750 mm Weight: Approx. 18 kg Condition: Used, untested Observed condition: - Complete machine present - Handle intact - Sharpening assembly installed - Base stand included - No major cracks visible - Heavy cosmetic we ...
- Automatic fabric spreading machine. - Extension table with approximate length 10000 mm. - Table width 2440 mm. - Approximate useful working width 2400 mm. - Automatic paving trolley with longitudinal movement on rails. - Electronic control by screen, keypad and control panel. - Includes manual scroll control and control pedal. - Includes fabric roll turner. - This item is delivered loaded by truck. The costs of dismantling and loading are those that are specified as additional costs. - Operating conditions of this item: unchecked. Auction-ID: A7-48840-45
Mixed lot consisting of 5 used bar stools / counter chairs. The chairs have an upholstered seat with grey fabric upholstery, a wood-look backrest and a black metal frame with footrest. Suitable for bar, café, bistro, kitchen, counter or gastronomy. Details: Quantity: 5 pieces Seat: upholstered, fabric cover grey/brown Backrest: wood look Frame: black metal Design: Bar stool / counter chair with footrest Auction-ID: A1-49675-219
Technical details Manufacturer: Mariofonio Type: Fabric roll rewinding and inspection machine Country of origin: Italy Configuration: - Powered spindle drive - Pneumatic tailstock support - Roll holding mandrel system - Start/stop control panel - Main isolator switch - Textile roll handling system Application: - Fabric roll rewinding - Fabric inspection - Textile roll preparation - Fabric measuring and handling - Cutting room preparation - Garment manufacturing - Textile production facilities Construction: - Heavy-duty industrial frame - Pneumatic support system - Powered roll rotation system Dimensions: - Length: Approx. 3200 mm - Width: Approx. 900 mm - Height: Approx. 1600 mm Weight: Approx. 700 kg Condition: Used Observed condition: - Structure appears complete - Tailstock assembly present - Mandrel and spindle installed - Electrical cabinet fitted ...
Technical details Manufacturer: Özbilim Tekstil Makinaları San. Tic. Ltd. Şti. Model: KDM-M L200 Type: Fabric relaxing machine Production date: 09/11/2018 Serial number: 8100640451800012 Product code: 8100640 Voltage: 220 V Frequency: 50 Hz Installed power: 0.37 kW Dimensions: - Width: 2570 mm - Length: 800 mm - Height: 1250 mm Weight: 157 kg Configuration: - Fabric roll unwinding system - Fabric relaxing and conditioning function - Variable speed control - Direction control system - Roller transport assembly - Operator control panel Application: - Fabric relaxation before cutting - Fabric conditioning and tension release - Garment manufacturing - Textile converting operations - Knitwear production - Cutting room preparation Function: - Reduces fabric tension - Improves dimensional stability - Prepares fabric for spreading and cutting operations Condi ...
Brand: FABREQUIPA Type: Low-bed semi-trailer Serial no.: B031002 / CD1321 (stamped) Axles: Configuration: 4-axle Loading ramps: 2 hydraulic rear loading ramps Landing legs: yes Deck: steel loading platform Dimensions: Overall length: approx. 12.2 m Overall width: approx. 2.72 m Equipment: Rear loading ramps: hydraulic, folding Tie-down lashing points: integrated along loading platform Mudguards: yes Lighting system: rear lighting installed Remarks: Heavy-duty low-bed semi-trailer suitable for transporting construction machinery and heavy equipment. Manufacturer plate partially illegible; identification number stamped on chassis. Shows normal signs of professional use. Approximate own mass: not readable on identification plate. Auction-ID: A7-48897-22
Extension: 580mm, including punching tools Auction-ID: A1-49001-12
Technical details Manufacturer: Global Model: Unknown Type: Band knife cutting machine Configuration: - Continuous vertical band knife blade - Large perforated vacuum worktable - Adjustable blade guide assembly - Integrated blade sharpening and grinding system - Overarm support structure - Fabric handling table - Emergency beacon/light mounted on machine arm Construction: - Heavy-duty industrial steel frame - Vacuum-assisted material positioning table Application: - Multi-layer fabric cutting - Pattern cutting for garment manufacturing - Upholstery material cutting - Technical textile processing - Foam cutting - Leather cutting Dimensions: - Length: Approx. 2200 mm - Width: Approx. 1800 mm - Height: Approx. 2100 mm Weight: Approx. 650 kg Condition: Used Observed condition: - Fabric lint accumulation around blade area - Wear marks on worktable surface - Mod ...
Total height 135cm (with legs) Tank height 90cm Diameter 90cm Total length 277cm Tank length 195cm Capacity 1240l Inspection hatches 2pcs Top entrances 2pcs Bottom drain entrance 1pcs Agitator with motor, diameter 38cm Auction-ID: A7-49327-52
Vibration dampers Quantity: 8 pcs. Type CBA Outer diameter 530mm Inner diameter 380mm Auction-ID: A7-49782-631
Complete with machine start ladder. Total length approx. 22 metres Auction-ID: A1-49165-1
maximum number of results exceeded
please refine your search
10 € 
