fabr used for sale

: 4100 No.1 gebr. Rods - machining center 5 - axes Fabr. LID MAHO, DMC type 60 S Bu. 2002 with Sinumerik 840 D - Powerline Shopmill ARB.-ber.: 760 x 460 x 560 mm Power: 19/28 kW Accessories: NC Swivel Head (B-axis) 120 / + 30 ° 60-Fach tool magazine with taper cleaning NC rotary axis (A-axis) with collet Chuck clamping top 65 Tailstock, hydraulically tweeter NC bar loader 1100 mm Workpiece pick-up facility with discharge conveyor Production package with -Coolant tank 600 l, INTERLIT SKA 200-760 - IKZ 40 bar through the Centre of the spindle -Conveyors -Rotating viewing window Tool measurement Fabr. BLUM Oil mist extraction Mode 4 Other: HSK-A 63 spindle speed range up to 18,000 min-1 Feeds up to 50 m / min Rapid traverse 50 m / min Space requirement approx. 5 x 4 x 2.8 m (see floor plan) Weight approx. 13 to Shipping dimensions approx. 12 lane meters in maxi ...

Hydr. Pipe expanding machine Fabr. IBP Pedrazzoli Fabr. Stern Brown 65Year 1984Pressure force: 16 tMax. Pipe size: 300 x 1.9 mmWorking speed: 60 mm / sec.Return speed: 110 mm / sec.Max. Mandrel stroke: 190 mmDrive power: 15 hpPower connection: 380 V / 50 HzExternal dimensions L x W x H: 1800 x 1200 x 1500 mmWith- 10 sets of tools 160 - 300 mm- separate control cabinet with controlsxa0xa0xa0 On / off, vise open / close, head back / forth,xa0xa0xa0 Pause / Emergency- FootswitchusedPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

- 2 ZK yeast tanks, Fabr. BAM, each with a capacity of 59.98 hl, zul. Operating overpressure 3.5 bar, in stainless steel, standing on 3 feet, with 3 cooling zones (2 x frame + 1 x cone), with screwed swivel cone tip, with agitator in the cone, with Spray head, top with ladder bracket, YOC 1985. - 2 ZK yeast tanks, Fabr. Steinecker, with a capacity of 62 hl each, zul. Operating overpressure 3.5 bar, in stainless steel, standing on 3 Feet (1 foot on load cell), with 3 cooling zones (2 x frame + 1 x cone), with screwed swivel Cone tip, with agitator in the cone, with spray head, pulled down cleaning line, top with conductor bracket, YOC. 1981.

- 3 fermentation tanks, Fabr. Kaspar Schulz, with á 2,843 lt. content, pressureless (0 bar), standing, in VA, flat-bottom tanks, coolable over 1 frame cooling zone, with manhole in the frame below and hefeluke in the frame above, with cleaning line, sampler, spout, ladder bracket, built in 1989, Ø: 1,500 mm, H: 2,400 mm, already dismantled. - 1 fermentation tank, Fabr. Kaspar Schulz, with 2,843 lt. content, pressureless (0 bar), standing, in VA, flat-bottom tank, coolable via 1 frame cooling zone, with manhole in the frame below and sight glass in the frame above, with cleaning line, sampler, outlet, ladder bracket, built in 1989, Ø: 1,500 mm, H: 2,400 mm, already dismantled.

- 2 fermentation tanks, Fabr. Kaspar Schulz, with á 5.005 lt. content, pressureless, standing, in VA, flat bottom tanks, coolable over 2 Frame cooling zones, with manhole in the frame below and sight glass in the frame above, with cleaning line, Sampler, outlet, conductor bracket, YOC 1997 and 1999, Ø: 1,800 mm, H: 2,650 mm, already dismantled. - 1 fermentation tank, Fabr. Kaspar Schulz, with 5,016 lt. capacity, 0.9 bar, standing, in VA, flat bottom tank, coolable over 2 Frame cooling zones and 1 floor cooling zone, with manhole in the frame below and sight glass in the frame above, with Cleaning line, sampler, spout, ladder bracket, built in 1992, already dismantled.

- 2 pressure tanks with 61.1 hl, Fabr. Noble, 2 bar, in stainless steel, single-walled, standing, with manhole in the lower frame, Spray head with downed cleaning line, fittings, with papers, Ø: 1,500 mm, H: 4,200 mm. - 4 pressure tanks with 102.2 hl, Fabr. Noble, 2 bar, in stainless steel, single-walled, standing, with manhole in the lower frame, Spray head with downed cleaning line, fittings, with papers, Ø: 1,800 mm, H: 4,900 mm.

A glass bottle fruit juice hot filling line with bottles cooling tunnel Capacity: 5,000 units (1.0 and 0.75l), built between 1994 and 2014 Box line, equipped with K 1; Dirt box task on transport system, done manually K2; Bottles lid screwdriving system from Fa. Elektro Maschinenbau Rink GmbH, Type: KM 740/7K , Fabr. No 07/1813/93 Year of construction 1993 4 boxes of 6 bottles each are made at the same time the lids autom. unscrewed and put into a Containers disposed of. K3; Kettner bottle unpacking line Comm. No. 93/0604/083, Type: R09 JUN 9, Year of construction 1993 12 tulips per row x 3 are simultaneously lifted out of the box and onto a bottle tasktable with 15 V2A chain belts. K4; Box washing and turning system Enema at the bottom, outlet of the box at the top Manufacturer Fa.. Klotzki Maschinenbau, Type: Reversible wheel washer, year ...

Door belt drilling machine - automatic drilling machine for door hinges Fabr. SCHÜCOArt. -No: 293784 Fabr. -No: 323 Year 1993Number of spindles: 8Speed: 2800 rpm.Air pressure: 6 barAir consumption: 0.16 lDrive power: 1.1 kWDimensions: 600 x 400 x 1500 mmWeight approx. 90 kgused, in good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

Series drilling machine make ALZMETALL type AB 3 ESV1)ALTMETALL Type AB 3 ESVDrilling capacity in steel / cast iron: 28/32 mmSpindle mount: MK 3with automatic feed: 0.1 / 0.2 / 0.3 mm / revSpindle speeds: 110 - 1450 rpm.Fabr. -No: 17097, year of construction 19802)ALZMETALL type AB 3 ESVDrilling capacity in steel / cast iron: 28/32 mmSpindle mount: MK 3with automatic feed: 0.1 / 0.2 / 0.3 mm / revSpindle speeds: 110 - 1450 rpm.Fabr. -No: 17198 built in 1980With- Thread cutting device3)ALZMETALL type AB 3 ESVDrilling capacity in steel / cast iron: 28/32 mmSpindle mount: MK 3with automatic feed: 0.1 / 0.2 / 0.3 mm / revSpindle speeds: 65 - 1250 rpm.Year 1972- common worktable: 1400 x 600 mm- Table height adjustable- Cooling deviceused, in good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not bi ...

Outer round grinding machine Fabr. Hungary type KU 250/750 Fabr. -No: 1622, Year of construction 1963 Technical specifications: Center width 750 mm Max. Grinding diameter 250 mm Smallest abrasive diameter with holes 15 mm Largest abrasive diameter at holes 220 mm Grinding wheel dimensions 350 x 63 x 127 mm Diameter of the internal grinding spindle 70 mm Speed of grinding spindle 1850 rpm. Table speed 0,35 - 6.0 m / min. Dimensions approx. 2400 x 1425 x 1500 mm Weight about 2500 kg UsedPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

Mobile deduster Fabr. ESTA Fabr. DUSTOMAT 41Fabr. -No: 09113 Year 1995Rated power: 1490 m³ / h.Minimum power: 1108 m³ / hAir pressure: 27.8 mbarHose connection diameter: 140 mmSpeed: 2870 rpm.Drive power: 3.0 kWused, in good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

Packer, Fabr. Matec, type: VPE 1200, 4-head, for 0.5 lt. bottle in box of 20, box cross-section, YOC 2004 Unpacker, Fabr. Matec, sorting unpacker, type: VPA 1800 SA, 6-head, for 0.5 lt. bottle in box of 20, box traverse, with 2 tables, built in 2004 Machines removed, price on request

1 machine (from below) 3 Roll grinding machine Fabr. Viet Model. VALERIA ICCC INF 1100 Year of construction: 2000 Roller 1. 21.3 kW Roller 2. 11 kW Roller 3. 11 kW Feed rate 3.7-20.3 with vacuum table 2 machine (from above) 3 rollers wide belt grinding machine Fabr. Viet Model. Challenge 331 TM Year of construction: 2000 1 roller 18.5 kW 2 roller 11kW 3 roller 11kW Working. 1100mm Feed speed.3.7 - 20.5m/min Engine. 1.5 kW with vacuum table

Platform scales, platform scales, floor scales made of stainless steel MINEBEA - Sartorius type IFS4-600LL-I Cleanroom scale Fabr. Ref: 379 383 79 Year of construction: 2019 Weighing capacity max. 600 kg section 25-1500 kg / 0.5 kg Platform size 1000 x 1000 mm Platform height approx. 30 mm Mains connection 220 volts, 50 Hz - Completely made of stainless steel 1.4301, suitable for food industry or midizin technology- Display unit, evaluation device CAIS 1 (Fabr. No. 37967266) - Calibration class III- Ramp for driving onto the weighing platform - Rollable via height-adjustable transport rollers Space requirements L x W x H 1250 x 1150 x 90/200 mm Weight 130 kg Transport package 1500 x 1250 x height 500 mm Weight with packaging 170 kg very good condition, as good as new (probably unused); used

Stock Number: 3782 CNC LATHE Manufacturer: MIYANO, Type: BNE-51S Machine NO.: 98BX510077, Year of manufacture: 1998 Specifications: Max. swing diameter 51 mm dia. Main engine power 11/7.5 kw Main spindle speed range 4000 rpm Bore through drawing tube 51 mm dia. X axis movement 150 mm X2 Ash Movement 115 mm Z ash movement 380 mm Z 2 axis movement 125 mm Tool turret 1 with 12 stations Powered stations turret 1 6 pieces. Tool turret 2 with 10 stations Powered stations turret 2 5 pieces Counter spindle Motor power counter spindle 5.5/3.7 Kw Max. collet subspindle 41 mm/dia Control FANUC 18T Fabr. Accessories: Charger Kama B4265 fabr. Length: 2600 mm + magazines, height: 1950 mm, width: 2560 mm, weight: 6300 kg

PET filler, Fabr. H&K, type: VVF112/14SV, with 112 filling valves, with 120 mm pitch, with 14-digit screw capper Fabr. Alcoa for PCO 28 closures, YOC 1985

with CNC control, Fabr. SIEMENS, type: SINUMERIK 840D POWERLINE, turret with 12 tool positions, max. speed: 4000 rpm, number of axes: 3, max. circulation diameter: 300 mm, max. turning diameter: 300 mm, max. turning length: 300 mm, with a workpiece loading system, Fabr. EWAB

Key data: 800 mm, 700 mm, 600 mm

with CNC control, Fabr. HEIDENHAIN, Type: TNC 530i, Travels: X-axis: 800 mm, Y-axis: 700 mm, Z-axis: 600 mm, with autom. Tool changer: 60-fold, max. 12,000 rpm, tool holder: SK40, IKZ coolant supply and 1 compact filter system, Fabr. INTERLIT, type: SPB3/600, built in 2004 as well as oil mist extraction and chip conveyor

Key data: 2600 mm, 750 mm, 695 mm

with CNC control, Fabr. HEIDENHAIN, type: ITNC 530, travels: X-axis: 2600 mm, Y-axis: 750 mm, Z-axis: 695 mm, NC rotary table 750 mm with hydraulic clamping, NC-controlled stepless swivel spindle with swivel range -98 degrees to +98 degrees, with autom. Tool changer: 50 tool slots + standby magazine with integrated CNC-controlled mast with 180 tool positions, cone cleaning station, max. 1800 RPM, number of axes: 5, tool holder: HSK A63, 3-D infrared touch probe, with IKZ coolant supply, cooling/filter system, Fabr. HEDELIUS, Type: SKM900, Oil Mist Extraction & Chip Conveyor

with CNC control, Fabr. SIEMENS, type: 828D, chuck processing up to: 350 mm, center distance: 1200 mm, max. 4000 rpm, BMT turret with 12 tool positions and driven tools, autom. Part removal, bar machining with counter spindle, diameter: 75 mm, internal tool measurement, with autom. Rod bearings, Fabr. BREUNING, Type: ILS-MUK, Oil Mist Extraction, Chip Conveyor & Coolant Supply

with CNC control, Fabr. SIEMENS, type: 840D, max. turning length: 400 mm, clearance: 52 mm, chuck diameter: 225 mm, up to 5000 rpm, power: 19 kW, tool turret with 12 tool positions and driven tools, bar loading magazine, Fabr. SPINNER, Type: SERVO-LOAD 80/1200 & Chip Conveyor

Tool turret with 12 tool positions, with driven tools, bar machining up to 65 mm diameter, chuck processing up to: 250 mm, max. 6000 rpm, control type: TX8F, optical tool measurement, with bar loading magazine, Fabr. LNS, type: QUICK-LOAD SERVO, with material feeder, filter system, Fabr. RUEZ & Chip Conveyors

with CNC control, Fabr. SIEMENS, type: 840, max. 2000 rpm, max. circulation diameter: 640 mm, max. turning diameter: 500 mm, max. turning length: 1300 mm, spindle passage: 60 mm, with three-jaw chuck, Fabr. FORKARDT, diameter: 315 mm, coolant device and quick release system

Lifting device standing, pneum. Fabr. Bittler T3 FT, 6 Bar, Y.O.M. 92 to 2002 Stroke 800 mm, lifting force 350 kg, adjustable forks 600 mm, safety shutdown when lowering for lifting trolleys when loading machines by hand, or when re-sorting

Lifting device standing, pneum. Fabr. Bittler T3 FT, 6 Bar, Y.O.M. 92 to 2002 Stroke 800 mm, lifting force 350 kg, adjustable forks 600 mm, safety shutdown when lowering for lifting trolleys or containers when loading machines by hand, or when re-sorting

plate heat exchanger Gea Ahlborn with 2 centrifugal-pumps:(hotwaterpump and recirculationspump) Manufacturer: Gea Ahlborn 6 Sections: preheater 1,preheater 2,heater,precooler 1,cooler,hotwater Type: VT 4 P (1.4401) Fabr.Nr.: 177/4113 flow rate: ca. 750 ltr/h (5 to 72/75°C) - 80 % gain of heat day of construction:1994 weight : ca. 220 kg Dimension : length x width x hight: ca. 103 x 44 x 143 cm

Excenter screw pump Fabr. Cheeks, Type 60.4 R-ST

Fabr. BABCOCK, type: 500 NVD, electric drive 3 KW, inlet diameter = wheel diameter: 600 mm, height 500 mm, 13 pieces available, for extracting fine dusts

Tape granulator BG 8, Fabr. Dreher More information and pictures on request

Used line for the production of the co-extrusion by PST Forming method. PTI - The twin screw extruder DS 92/28   2x screws with a diameter of 92 mm The length of screws 28 x L / D Snails closed system with internal temperature control, deep nitrided, with degassing on the cylinder, extruder equipped with a vacuum pump with filter, Siemens Servo Motor power: 60 KW Torque: Nm 15700 Screw rotation: 0 - 50 rev. / Min. Zones with ceramic heaters with an intense cooling: 5 x 5 KW Cooling Zones: 4 Performance with hard PVC, depending on the materials and tools: max.600kg / h Length: 4500 mm Width: 1600 mm Height: 2300 mm           Extruder equipped with a microprocessor control SIEMENS type Extrusion Pro Pak visualization 2. Co-Extruder PTI - The twin screw extruder DS 68/28 Snails with a diameter of 2 x 68 mm Length of the screws: 28 x L / D Snails cl ...

Used ultra filtration line for milk and whey Brand: Type: UF 70 capacity: 10.000 l / h Dimension: Stages: 4 inlcuding likes: Mono pump, UHT equipment, pre storage tank, whey cirulation pump 2 x cleaning pump UF for whey and milk: - manufacturer: Hungarian milk R + D Kft. -Date of fabr: 1989 - weight: ~ 2000 kg - membranes: Cook XL-1000 4336-HFK-131-VYV - flow capacity: 13,500 litres / h - temp/pressure: 52 ° C (6 bar) - material: tubes and pipes: WNr. 1.4301 - membranes: Cook XL-1000 organic spiral membrane - cleaning: with CIP - Accessories: complete eletric box, and PC aided control. -Energies: Electric power (about 40 kW)

Excellent general condition. Used in plastic mold makers mainly for 3D graphite-carbon tool models and engraving work. Low cutting strengths, low machine load... Travel x=1200 y=800 z=500 Spindle speed 0 - 8000 rpm / Drive power main spindle 11 kW feed speed 0 - 30 m/min / table dimensions 1320 x 800mm Table load max. 2,000kg / 20-fold tool changer / max wzg diameter 63mm / WZG Long 200mm / tool holder SK 40 / 3D probe, Fabr. Heidenhain, type TS 220 / Cooling agent equipment / Spaenefoerderer / Suction (optional) Complete enclosure Heidenhain Control type TNC 426 PB digital / Electronic handwheel Heidenhain HR 410

Material conveying stations for powdered materials, on movable base, with material dropler in V2A (dimensions 700 mm x 700 mm, incl. protective grille inside), blow-through cell wheel lock in V2A (200 mm , 0.55 kW drive) Fabr. Seeger, AerzenER GMA rotary piston blower incl. drive, air filter, compensating vessel and control cabinet.

The fishing and packing plants have a simple and this stable and torsion-free construction. The machines are characterized by ease of use, flexibility, reliability and low maintenance requirements. The CAMBORIT clip has a capacity of up to 125 packs / min. 1 x 2 bottles can be packed with the CAMBORIT clip. To do this from flat so called "bars" cut to shaped, that get caught under the edge of the bottle. The machine can be operated automatically or manually. Display and operating elements are located on the control panel. All functions are controlled from the control panel and controlled. Errors of the cycle are displayed on the control panel. Action: At the beginning of production the magazine must first cut to be filled. The minimum level is cut to the magazine below, the machine will not turn on. After switching on the machine when existing minimum level of bottles with a capac ...

Universal tool-feeding machine, used universal milling machine, used Type FU 250 x 1000/2 Fabr. WMW Auerbach Built: 1988 Table size/ table: 1130 x 255 mm Laengsmotion/ longit. move: X 690 mm Horizontal movement/ horiz. Move: Y 190 mm Vertical movement/ Vert. move : Z 360 mm Tool holder/taper: ISO 40 Spindle speeds R+L infinitely/ speeds of spindle ( left/right) 56 - 2800 rpm. Pre-shot stepless all axes X, Y and Z/ feeds all axis 10 - 630 mm/min / 250 mm/min Drive power/ load 3.8 kW Weight: 2 t Specification: Vertical head,shock head

Plant: second-hand mobile Chamber filter press Type: Rittershaus & Baldwin AEHIS 1200 Year of construction: 1991 Filter plates sizes: 1200 x 1200 mm Number of plates: filter plates: PP Thickness: Expiration: closed Filter cloths: optionally available in voting on the medium Filter surface: approx. m ² Presses contents: approx. 3000 dm3 Filter pressure: 15 PSI Closing pressure: approx. 380-410 bar Plate transport: automatically Hydraulic power pack: Condition good Cylinder: no leaks, Rod blank-good condition Eccentric screw pump: as before priming pump Eccentric pump: EH2 type Bornemann 1900 Piston diaphragm pump: a pump Piston diaphragm pump: Type SP535N, Emmerich Wear parts: piston diaphragm pump replaced (proof of purchase. E installation: 2007 full service check (proof of purchase. Electrical connection: 125 amp input. Electrical connection: various outputs for external devices i ...

ertikal machining center, used, from location vertical machining center, used, Model/ model: VS 500 SPEED Fabr./ make: NORTE Year built/ year: 1999 Control/ control: SIEMENS 840D x-Way /x-travel 2000 mm y-way / y-travel 500 mm z-way / z-travel 500 mm Feed: 1 - 8000 mm/min Table size / table-size 2120 x 550 mm Table load / table load 2000 kp Rapid gear X-axis / rapid traverse X-axis 40 m/min Rapid gear Z-axis/ rapid traverse Z-axis 20 m/min Tool holder / tool taper HSK 63 A Spindle speeds - infinitely variable/ spindle turning speed 0 - 15000 rpm Spindle drive/spindle motor 20 kW Spindle bearing diameter / spindle bearing diam. 70 mm Position accuracy / position accuracy: 0.020 mm Control SIEMENS 840D Tool diameter: 63 / 126 mm Tool Magazine: Chain Magazine/ toolpiece magazine: 40 pieces Total power requirementm.65 kVA Machine w ...

Kat-nr. 14-00134 in very good condition Description available Fabr.-No. 1992 Type: VELACART B750 - 16H07 DN 080 Built: 1991 Filter insert: Candle Liquid: Gas: permissible operating overpressure (bar) 10 10 Container permissible operating temperature (C) 85 85 Room capacity: Container (l) 105 Clamping screws type M20X85A2 Manufacturer: 2 Dimensions and weight: H x W: 2000 x 800 mm Weight: approx. 165 kg All prices ex works plus legal Vat Intermediate sale reserved Delivery: from Karlstadt-Karlburg location - freight costs: according to delivery

Glass bead saw Fabr. STRIFFLER type 2730Fabr. -No: 136, built in 1978for sawing strips (glazing beads) to 45 °Technical specifications:2 x saw blades: Drm. 200 mm carbide tipped2 x pneumatic workpiece clamping approx. 40 mmSaw stroke: 400 mmHeight adjustment: 40 mm2 motors: 0.75 kW, 380 V, 2830 rpm.Operating pressure: 6 - 8 barWith:- Underframe- Manual saw feed- Safety device against unintentional pulling of the sawxa0xa0 gensets forwardused, in good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

Line boring machine, used gear spindle drilling machine, used Fabr. WEBO Typ: S 3 e Baujahr: 1980 Drilling capacity in steel (diameter) 3 …. 13 mm / MK 2 Bohrhub: 90 mm Throat depth: 90 mm depth: 200 mm Spindle speeds of 750 …/8500 RPM Spindle number: 4 workpiece - mounting height: 280 mm max table size 320 x 1200 mm Table vertical adjustment: 280 mm Machine weight approx. 800 kg

Miter and miter circular saw Fabr. ELU type TGS 172Machine -No: 2201 Year 1983Saw blade diameter: 250 mmSaw blade speed: 2600 rpm.Cutting area 90 °: 0 x 70 mm45 °: 0 x 38 mmPower connection: 220 V / 50 HzElectricity requirement: 1.1 kWDimensions: 700 x 650 x 850 mmWeight approx. 48 kgWith- Version rotatable as a cross-cut and table saw- tiltable and rotatable- Length stop 3.0 m- feet for machine and stop- Table longitudinal stop- Suction hoseused, in good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

State of and exterior absolutely new, general overhaul and repainted Performance: 12 months Manufacturer: Leybold Type: DK 100 Fabr. -No.: 11106 Motor: 400V DS Equipment: Mineraloel Including: User Manual Oel Mist Separator optional Delivery time: on request Photo showing a general-ordered DK200 ; ready for use

Aluminum circular saw Fabr. MEP type Cobra 350Fabr. -No: 021746 LRX year 1993Cutting area 0 ° round: 120 mmCutting area 0 ° square: 105 x 105 mmCutting area 0 ° flat: 180 x 70 mmCutting area 45 ° round: 120/110 mmCutting area 45 ° square: 100 x 100/95 x 95 mm mmCutting area 45 ° flat: 135 x 60 mmSaw blade speeds: 1700/3400 rpm.Vise opening: 180 mmDrive power: 1.5 / 2.2 kWWeight approx. 160 kgWith- 2 hours. pneum. tensioners- Underframeused, in very good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

Glass bead saw / miter saw for aluminum and PVC profiles Fabr. ELUMATEC type MGS 460Fabr. -No: 20441 built in 1994Saw blade diameter max .: 300 or 250 mmSaw blade speed: 3800 rpmSection range: sh. diagramCompressed air connection: 7 barAir consumption per cycle: 10 l / minPower: 1100 WPower connection: 380 V / 50 HzOutside dimensions approx: 600 x 600 x 1200 mmWeight approx. 60 kgWith- Roller conveyor- Spraying deviceused, in very good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

Copy milling machine for Alu Fabr. ELUMATEC type KF 187Machine -No: 20030 Year 1985with large milling areaMilling range: 240 x 420 mmStroke: 240 mmClamping range of profiles: 250 x 250 mmMilling speed: 12000 rpm.Air consumption p. Working stroke: 12/32 lDrive power: 740 wattsAir connection: 7 barPower connection: 380 V / 50 HzWeight approx: 260 kgExternal dimensions approx. 1000x1000x1400 mmWith- Spraying device- pneumatic tensioning device- large stencil and milling area- pneumatic copy pin movement and milling depth adjustment- turret depth stop for different cutting depthsused, in good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

50 pcs tool cassettes for inserts Fabr. Widax-Heinlein

Bench drill with pneumatic. Feed Fabr. IXION type BT 23Fabr -No: 140268Continuous drilling capacity: 23 mmNormal drilling capacity: 28 mmSpindle: MK 310 spindle speeds: 80 - 1400 rpmDischarge: 260 mmDistance spindle / table: 260 - 600 mmTable: 390 x 420 mmColumn diameter. : 110 mmTotal height approx. 1200 mmEngine: 1.0 / 0.6 kWWeight approx.: 215 kgWith- Pneumatic-hydraulic feed unit VE 22xa0xa0 Drilling capacity 20 mmxa0xa0 Drilling depth 100 mmused, in good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

107 piece filter candles Fabr. Norclean L 500 in cardboard

No. 2630: 1 gebr. CNC vertical milling machines and drill / jig boring machine Fabr. BURKHARDT & WEBER Type 120 NCW HYOP Retrofit / overhauled in 2000 with HEIDENHAIN TNC 426 PB ARB.-ber.: 1250 x 630 x 560 mm Power: 44 kW Accessories: fixed table / table 1200 x 710, additional table top height 200 mm,. 36-Fach tool changer magazine, coolant system / coolant. HEIDENHAIN - probe / probe TS 630 -the pictured magnetic clamping table is not included! -Miscellaneous: spindle ISO 50, revs / speed range 30-3000 min-1 (with optional high-speed spindle) Max torque / torque 522 NM Rapid / rapid feed 10 m / min maximum distance spindle nose - table surface 725 mm Projection spindle Center - stands 800 mm. Space requirements / measurements approx. 5 x 5 m, weight / weight approx. 12 to The engine was overhauled in 2000 General / retrofitted and modernized with digital drive ...

No. 3087: 1 gebr. 5-axis milling machine Fabr. BOHNER & KÃ?HLE, VH 2 type / 10 K with control Fidia V 7.2 arb.-ber.: 1500 x 1500 (1000) x 975 mm Power: 14 kW Accessories: Table 2500 x 1000 mm 16 x tool changer Cup other: Spindle retainer for SK 50 Spindle speeds 40-5600 min-1 RADIUS Milling spindle 1030 mm Weight 12500 kg