equipment used for sale

: neu : ca. 4 Monate ab Auftragse : Türkei : 32600 € : 658.52 € : 6000x41x1,3 mm : 20-100 m/min : 540 mm : 540 mm : 750x540 mm : rund 510 mm, quadrat 450 : rund 270 mm, quadrat 250 : 695 mm : 0.12 kW : 4 kW : 3000 mm : 1300 mm : 2150 mm : 2445 kg hydraulic vice digital readout for scale of bending angle hydraulic clamping of sawing arm turning of sawing arm by hand continuously variable down speed of sawing arm automatic sawing frame lifting after cutting sensitive cutting pressure adjustment subject to material condition hydromechanic tape tension readout by manometer mobile control panel angular geared conical heavy duty gear unit driven chip brush tape guiding by hard metal sheet plates and rolls automatic tape break lock coolant equipment hydraulic uplift of sawing frame 3° inclined saw band user manual in GERMAN or ENGLISH (the vertical hydraulic clamping shown on the photos ...

Used autoclave ASCA with 340 liters capacity -Refurbished- - 12 months warranty - for sterilizing, preserving, pasteurizing, cooking, curing, and maturing - Compl. made of high-quality stainless steels - Lid with quick-release fastener - Equipped with all safety-related equipment - Latest requirements of the valid Pressure Vessel Ordinance - All safety-related equipment, such as safety valve, pressure gauge, overheating protection, steam release valve, safety outlet valve, etc. installed - Subjected to construction and pressure testing by TÜV, certificates are enclosed - Fully automatic control by F-value controller including operating temperature, core temperature, F-value control, preselection and operating time clock Specifications: - Capacity: approx. 340 litres - Heating: Gas via gas blower burner - Operating pressure: up to 2.5 bar - Temperature range: up to 13 ...

- Exhibition machine - For continuous air demand and intermittent operation Electronic control for reliability and efficiency. Increased flexibility thanks to two compressed air tanks High-quality and expandable equipment. Smooth and quiet. Due to temperature control of the oil, it can also be used in intermittent operation. Equipment DUO KK with refrigerant dryer and fine filter as pre-filter upstream of the refrigeration dryer Condensate conditioner for oil-water separation automatic condensate traps. ---------- Technical Data ---------- Container size: 2 x 100 litres, Effective delivery quantity approx. 380 litres, Maximum pressure: 10 bar, Motor: 4.0 kW, Speed: 2,880 rpm, Sound pressure level: 65 dB, Dimensions (LxWxH): 1,200 x 900 x 1,250 mm, Weight: 201 kg new exhibition machine

DEA SCIROCCO 151310 coordinate measuring machine built in 1997 in Italy, is used to make fast and highly accurate measurements of workpieces with complex shapes. Workpiece measurements are taken using contact or non-contact methods, which are then represented as a set of point coordinates. The dimensions of the measured workpiece are taken using the RENISHAW TP7M measuring probe, which is installed on the RENISHAW PH10MQ indexing head. The measuring probe uses strain gauge technology to eliminate granularity errors and achieve the highest measurement quality in the X,Y,Z axes with feeds of 1500 mm (X axis), 1300 mm (Y axis) and 1000 mm (Z axis). The measuring machine is offered with a wide range of equipment, including an advanced PC-DMIS package for Windows, performing detailed geometric measurements. The total weight of the machine is 3650 kg. Technical data of the DEA SCIROCC ...

: gebraucht : 2021 : 3965 : prompt, Zwischenverkauf v : Taiwan : 15600 € : 1 : 42 mm : MK 4 : 280 - 1.100 mm : 44 - 1.500 (12) U/min : Stahl: M 25, Guss: M 38 : 1880 mm : 870 mm : 2210 mm : 1800 kg : 470 - 1.270 mm : 0,05 - 0,15 (3) mm/min : 2.2 kW : 260 mm : 280 mm : 1.725 x 715 x 180 mm : 0,75 kW : 635 x 520 x 415 mm : 2530 mm DEMO MACHINE left/right rotation automatic feed drilling depth limit manual headstock adjustment with mechanical clamping electric height adjustment of extension arm and mechanical clamping mechanical clamping of swivel movement of extension arm central operation panel on the front side power load readout for drilling spindle hand wheel for spindle fine feed coolant equipment machine lamp box table machine and equipment according to the CE-regulations operating manual in GERMAN and ENGLISH The data for this ad was created with ModulMWS - the software solution  ...

GeneralUniversal machining centre; Control: Siemens 840D-Powerline ShopMill Classic Technical DataFeed rate longitudinal/transverse/vertical60000/60000/60000 mm/minRapid traverse longitudinal/transverse/vertical60/60/60 m/minWorking area 1Longitudinal1250 mmCross1000 mmVertical1000 mmMiscellaneousClamping SystemHSK-A 63 Tool changerApplicationUniversal Type of magazineChain Tool changer planehorizontal Type of gripperDouble gripper Automatic swivel milling headUniversal head: automatic changeover from vertical to horizontal machiningProd. package 40 bar/23 l/minProduction package 40 bar/23 l/min / 580 psi/6 gallon/min (theoretical pump performance) tank 900 l, rotating clear-view window, scraper flight conveyor coolant through spindle centre form ADNC rotary table with pallet changerType of Measuring system Direct measuring systemTool magazine,chain, 60 pocketsTool magazine chain magazin ...

IVECO MAGIRUS STRALIS L162 truck + crane (17m) + tail lift + Rockinger towbar This VECO MAGIRUS STRALIS L162 truck with crane and tail lift is a reliable workhorse designed for demanding transport tasks. Thanks to its robust construction and extensive equipment, it can perform reliably. Equipment: Remote control crane (17m): A powerful crane with a reach of 17 meters that facilitates the loading and unloading of goods and offers flexibility in handling. Tail lift: A robust tail lift that allows for easy and safe loading and unloading of goods. Aluminum flooring: A heavy-duty aluminum floor that provides a stable foundation for transporting goods. Aluboxes: Additional storage space in the form of aluminium boxes to safely store small items and make efficient use of the cargo space. Sliding tarpaulin: A sliding tarpaulin that protects the cargo area from the elements and allo ...

Fiber Laser Machine HLF1530 8KW - IMMEDIATELY AVAILABLE high-quality equipment Laser power: 8kW - VA up to 20mm, FE up to 30mm Sheet size: 3000 x 1500mm Equipment: Precitec Auto Focus Procutter Cutting Head IPG resonator with 8kW incl. German ! On-site warranty THK Guided Tours fast, automatic changing table Sheet metal layer detection automatic nozzle cleaning Siemens touchscreen control with LAN/USB Siemens Drives CE safety by TÜV Süd Sick light barriers around the changing table Will include: Warranty CAD CAM Software Commissioning Delivery within Germany Training offered We have been servicing YAWEI machines for the European market for more than 15 years. We are your service partner for all questions. You can test an identical machine at any time with us under power. Come and visit us !

Winterhalter Pass-Through Dishwasher GS 502 Energy Cost-effectiveness reinvented: GS 500 Energy With the GS 500 Energy, you minimize your operating costs. This is because the built-in Energy exhaust air heat recovery system significantly reduces energy consumption. In addition, it ensures a good indoor climate and protects the environment at the same time. Winterhalter offers the advantages of the Energy version in all machine series. The GS 500 series from Winterhalter offers exactly the right rack washer for your individual needs. The classics GS 502 and GS 515 are perfect for restaurants, hotels or smaller catering facilities. As energy-saving versions Energy or Energy+, you can also get models that are equipped with innovative energy recovery systems with the same washing performance. And for extreme capacity fluctuations or a generally higher throughput, there is the GS 500 Twi ...

MAZAK SUPER TURBO X48 MK II laser was built in 2001 in Japan. The compact laser cutting machine is designed for precise cutting of pre-programmed shapes in sheet metal made of structural steel, stainless steel and aluminium. The machine’s small dimensions and components integrated into the machine frame, such as the chip conveyor and the MAZATROL L32B CNC control, allow it to be used to its full potential both in small factories and in series production. The MAZAK ST-X 48 MKII gas cutting machine can process sheets with a maximum thickness of 15 mm (S235 structural steel), 6 mm (stainless steel) and 3 mm (aluminium). High cutting speed as well as excellent machining quality and accuracy over the entire working area at low operating costs are achieved thanks to the YB-L150A 8M resonator, characterised by high energy efficiency, allowing the laser beam power to be adjusted in the rang ...

Standard configuration ? Stable machine frame as a welded, all-steel construction ? Ram (press beam), highly resistant to torsional forces ? Electrohydraulic downstroke drive via proportional valves ? Modern block hydraulics ? CNC backgauge with rack-and-pinion drive, for X and R axis, safe adjustment of stop fingers from the front ? Modufix upper tool clamping system, manual ? Lower tool holder for single-V dies, manual clamping, programmable shifting ? Control system: 2D/3D graphic control, Delem DA 69 with 12 color screen (LCD) ? Safety equipment Additional equipment Crowning options ? CNC crowning Backgauge system options ? 4-axis backgauge system ? 2 additional clip-on stop fingers Tool clamping and angle messuring system ? Upper tool claming, hydraulic ? Lower tool clamping, hydraulic ? ACB Preparation Material handling options ? 2 front support brackets

Control Heidenhain TNC 640 Speed [rpm] 15000 Travel X/Y/Z [mm] 800/900/620 Tool pick-up HSK-A63 Spindle: Technology Direct Drive Speed 15,000 rpm Tool holder HSK-A63 NC swivel rotary table: Technology Swivel rotary table with torque drive, Fabr. Kessler A-axis +/- 120° C-axis 360° Clamping surface ø800 mm Table load (max.) 1,000 kg Workpiece dimensions (max.) ø800 x 500 mm General: Tool magazine 2x chain magazine à 32 stations Rapid traverse in X/Y/Z 48 m/min Equipment/accessories: Direct displacement measuring system (glass scales) in all axes Chip Management Chip Conveyor Coolant management IKZ system with filter and high pressure, 18 bar Workpiece Measurement Probe, Heidenhain TS 740 Tool Measurement Laser, BLUM Setup operation Electronic handwheel Other equipment spindle coolers

LINE FOR FILLING EDIBLE OIL IN 1,0 LTR. PET BOTTLES Capacity: 6,000 hph x 1.0 L conisting of: Blower KOSME KSB 3000 – 2001. – 2 pcs x 3,900 fph Box for preforms with transport to the blower Compressor for cooling moulds MTA S.R.L. - 2000 KOSME bottle air conveyor – 1999 AISI 304 stainless steel Electrical control cabinet with PLC Built-in air filters It transports bottles from blower to filler Filler and capper – ICS-Slovenia - 1995 – 6,000 L/h Labeller ICS – 1995 – paper labels, cold glue Conveyor belts ICS – 1995 Packer in transport boxes 3x5 bottles – ICS – 1995 Shrink wrapper SMIPACK-packer in foil 2x5 bottles – 2013 Pallet wrapper ZLATOROG-Slovenia – 1999 KAESER low and high pressure compressors – 2000 Refrigeration dryer There are spare parts worth approx. 30.000.- EUR It has complete technical documentation Required space for eq ...

GENERAL Project No.: 905433 Quantity: 1 pcs. Manufacturer: TORNOS BECHLER Type: MultiDeco 20/6 Control: Tornos Bechler Fanuc PNC Deco Year of construction: 2001 Condition: Used machine Machine on approx. (hrs): 77,725 Layers approx.: 2-3 layers DESCRIPTION TURN 18 axes turning diameter 20 mm 6 pcs. main spindle(s) speed main spindle 6000 1/min power main spindle at ED 10-40/100% 15 kW ADDITIONAL EQUIPMENT Splash guard cladding with fully encapsulated working area Lighting in the workroom Preparation for central oil/emulsion mist extraction system Hinged belt chip conveyor MAYFRAN Consep 2000 Machine is/was operated with oil Coolant device Automatic CO2 fire extinguishing system Bar feeder/bar loading magazine ROBOBAR MSF 522/6 GENERAL TECHNICAL DATA Total power requirement 43 kVA Machine dimensions (LxWxH) approx. 3500x1600x1950 mm Machine wei ...

: neu : ca. 6 Monate ab Auftragse : Taiwan : 27100 € : 547.42 € : 50 mm : MK 5 : 360 - 1.250 mm : 44 - 1.206 (12) U/min : Stahl/Guß: M40/M50 : 2060 mm : 995 mm : 2240 mm : 2300 kg : 441 - 1.345 mm : 0,06 - 0,2 (3) mm/min : 3.7 kW : 300 mm : 270 mm : 1.785 x 785 x 190 mm : 0,75 kW : 635 x 520 x 420 mm : 2645 mm : 0,75 kW left/right rotation automatic feed drilling depth limit manual headstock adjustment with hydraulic clamping electric height adjustment of extension arm andhydraulic clamping hydraulicclamping of swivel movement of extension arm central operation panel on the front side power load readout for drilling spindle hand wheel for spindle fine feed coolant equipment machine lamp box table machine and equipment according to the CE-regulations operating manual in GERMAN and ENGLISH The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: neu : ca. 6 Monate ab Auftragse : Taiwan : 48700 € : 983.74 € : 65 mm : MK 5 : 440 - 1.580 mm : 40 - 1.920 (12) U/min : Stahl/Guß: M50/M60 : 2850 mm : 1400 mm : 2940 mm : 4600 kg : 380 - 1.600 mm : 0,07 - 0,96 (6) mm/min : 5.5 kW : 432 mm : 370 mm : 2.480 x 1.050 x 210 mm : 1,5 kW : 700 x 500 x 400 mm : 3170 mm : 0,75 kW left/right rotation automatic feed drilling depth limit manual headstock adjustment with hydraulic clamping electric height adjustment of extension arm andhydraulic clamping hydraulicclamping of swivel movement of extension arm central operation panel on the front side power load readout for drilling spindle hand wheel for spindle fine feed coolant equipment machine lamp box table machine and equipment according to the CE-regulations operating manual in GERMAN and ENGLISH (sample photo) The data for this ad was created with ModulMWS - the software solution of Log ...

: neu : ca. 6 Monate ab Auftragse : Taiwan : 32200 € : 650.44 € : 50 mm : MK 5 : 350 - 1.600 mm : 56 - 1.450 (12) U/min : Stahl/Guß: M40/M50 : 2670 mm : 1120 mm : 2410 mm : 3300 kg : 465 - 1.420 mm : 0,06 - 0,2 (3) mm/min : 3.7 kW : 320 mm : 270 mm : 2.550 x 970 x 200 mm : 1,5 kW : 630 x 500 x 500 mm : 2760 mm : 0,75 kW left/right rotation automatic feed drilling depth limit manual headstock adjustment with hydraulic clamping electric height adjustment of extension arm andhydraulic clamping hydraulicclamping of swivel movement of extension arm central operation panel on the front side power load readout for drilling spindle hand wheel for spindle fine feed coolant equipment machine lamp box table machine and equipment according to the CE-regulations operating manual in GERMAN and ENGLISH The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: neu : ca. 6 Monate ab Auftragse : Taiwan : 14600 € : 297.84 € : 32 mm : MK 4 : 220 - 950 mm : 73 - 1.247 (6) U/min : Stahl: M 25, Guss: M 32 : 1800 mm : 830 mm : 2190 mm : 1250 kg : 350 - 1.210 mm : 0,05 - 0,15 (3) mm/min : 1.5 kW : 210 mm : 220 mm : 1.260 x 640 x 160 mm : 0,75 kW : 600 x 445 x 380 mm : 2320 mm left/right rotation automatic feed drilling depth limit manual headstock adjustment with mechanical clamping electric height adjustment of extension arm and mechanical clamping mechanical clamping of swivel movement of extension arm central operation panel on the front side power load readout for drilling spindle hand wheel for spindle fine feed coolant equipment machine lamp box table machine and equipment according to the CE-regulations operating manual in GERMAN and ENGLISH The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: neu : ca. 6 Monate ab Auftragse : Taiwan : 18300 € : 373.32 € : 42 mm : MK 4 : 280 - 1.100 mm : 44 - 1.500 (12) U/min : Stahl: M 25, Guss: M 38 : 1880 mm : 870 mm : 2210 mm : 1800 kg : 470 - 1.270 mm : 0,05 - 0,15 (3) mm/min : 2.2 kW : 260 mm : 280 mm : 1.725 x 715 x 180 mm : 635 x 520 x 415 mm : 2530 mm left/right rotation automatic feed drilling depth limit manual headstock adjustment with mechanical clamping electric height adjustment of extension arm and mechanical clamping mechanical clamping of swivel movement of extension arm central operation panel on the front side power load readout for drilling spindle hand wheel for spindle fine feed coolant equipment machine lamp box table machine and equipment according to the CE-regulations operating manual in GERMAN and ENGLISH The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

GENERAL Project No.: 905471 Quantity: 1 pcs. Manufacturer: TAKISAWA Type: TT 500 GD Control: Fanuc 0i TF Year of construction: 2018 Condition: Used machine Approx. (hrs) control: 22,918 Program run approx. (hours): 7.112 DESCRIPTION TURN turning diameter 50 mm turning length 50 mm 2 pcs. main spindle(s) – front loading speed main spindle 8000 1/min power main spindle at ED 10-40/100% 7.5/3.7 kW Spindle passage main spindle 37 mm Spindle diameter in front bearing Main spindle 80 mm Spindle flange size main spindle 80 F Travel in X/Z 250/300 mm rapid traverse speed in X/Z 20/24 m/min Full clamping cylinder on the main spindle Coolant supplied through the main spindle Pneumatic workpiece system control left and right Fixed block tool holder Number of stations/powered 5/0 ADDITIONAL EQUIPMENT Tool breakage monitoring Splash guard cladding with ful ...

Packaging machine Beck Fitpacker Junior FJ 1040 U - Used equipment built in 1995 - small repairs necessary The Fitpacker Junior has a high packing performance and can process products of different lengths in disorder. A programmable logic controller is located at the top of the control cabinet and is easy to handle via a logical user interface. The packer also has a feeding system, which is especially suitable for line operation. Machine changeover times are kept short by a digital operating concept and an adjustable shape shoulder. The control cabinet can be opened and swivelled so that optimal access is guaranteed in the event of maintenance and downtimes are reduced. The film roll holder is mounted at an ergonomically reasonable working height. Working speed: Actual production speed and effective net output depend on format, Type and composition of products and can ...

working area: 3000x1500 mm : 20 mm : 15 mm : 10 mm max. workpiece weight: 900 kg : 4000 W Machine comes WITHOUT LIFTMASTER! Standard equipment Machine: - Closed machine frame with integrated laser unit - Motion unit for high-precision machining - Torque drive in combination with linear direct drives - Closed beam guidance - Single cutting head strategy - Cooling unit - Automatic pallet changer in longitudinal direction - 19 touch colour screen - Longitudinal conveyor belt - Work area lighting - Position laser diode - Spraying device - PierceLine - FocusLine - NitroLine - PlasmaLine Cutting head: - Lens cutting head with 250mm focal length - Universal quick-change device (UTI) - LensLine with condition check - ControlLine: Height control and sheet outer edge detection - Lens with RFID chip Control system: - SINUMERIK 840D SL control system - Simple workshop programming - Fast post-product ...

SAACKE UW I D CNC universal grinding machine was manufactured in Germany in 2020. The extremely powerful machine is designed for the fully automatic wet grinding of a wide range of tools, such as knives, cutters or drills. Machining is performed in a single work cycle, which significantly increases production efficiency, saves time and reduces costs. The SAACKE CNC tool grinding machine allows the use of a chain or pallet system for automatic tool feeding and machining of workpieces within it with a maximum diameter of 250 mm and a length of 480 mm. Precision tool grinding is performed in five numerically controlled axes (X,Y,Z,A,B) using grinding wheels housed in a 6-position magazine separated from the workspace with an automatic grinding wheel changing system. In order to guarantee high travel speeds and positioning accuracy, the X,Y and Z axes of the UWID CNC tool grinder are m ...

sheet width: 2050 mm plate thickness: 4,5 mm max. plate thickness: 4,0 mm anbiegen roll length: 2050 mm min. dia.: 210 mm roll diam. toproll: 140 mm weight: 1550 kg range L-W-H: 3220 x 1200 x 900 mm Exhibition machine - unused (!) Special price on request List manufacturer price: 21.400 euros Machine with special equipment Furnishing: - Electrically driven top and bottom rollers - Top roller can be swung out, with folding bearing - Conical bending device - asymmetrical roller arrangement - self-braking main motor - separate control and operating panel - Profile inserts in the rollers - Safety line - User manual in German - CE mark / declaration of conformity Special equipment included in the price: - hardened rollers - Motorized rear roller adjustment - digital position display for the rear roller - 2x bending speeds The data for this ad was created with ModulMWS - the software sol ...

ENGEL INSERT 60H/30 SHUTTLE injection moulding machine was manufactured in 2016 in Austria. A specialised machine with a small footprint, is used for, among others, the overmoulding of inserts and the joining of various materials such as glass, metal and electronics. Thanks to the electric control of the injection unit and the ‘pressure locking’ system for the injection cylinders, the injection moulding machine guarantees high repeatability and excellent quality of inserts. The ENGEL INSERT 30 injection moulding machine allows you to set the speed and clamping force to prevent damage to the mould. Once both mould halves are closed and a high closing force is generated, the injection unit pushes the nozzle against the injection sleeve of the mould and produces an adjustable clamping force. At the end of the cycle, a very powerful screw with a diameter of 18 mm injects the melt unde ...

Cutting length: 5300 mm Cutting height: 0-2.150, 80-2.050 mm automatic: Option ja/nein ELCON precision panel saw type ADVANCE 215 Partnership Edition -------------------------------------- Technical description: Cutting height: vertical: 0-2,150mm, horizontal: 80-2,050mm Cutting length: 5,300mm Cutting depth: 80mm (with clamps: 55mm) Saw blade: diameter 303mm, bore 30mm, Z=60 hollow roof tooth Saw blade rotation: 5,000 rpm. Motor: 5.5 kW, including automatic star-delta start Required air pressure: 6 bar Measurement reading for horizontal saw cuts: -over scale from 0 - 2,070mm -via strip cutting stop from 75 - 500mm Measurement reading for vertical saw cuts: -over scale from 0 - 1,300mm Extraction connection: 1 x 100mm 1 x 120mm Features: -ADVANCE clamping system, consisting of: 2 pneumatic clamps, those on vertical axes are motorized on a ball screw from above move down. The tongs carry  ...

0: , St. Width: 1000 mm Length: 1720 mm Commission car RU-KWI-S --------------------------------------- The RU-KWI-S is for internal and truck transport. In When unloaded, it can be nested. For forklift and Suitable for crane transport. --------------------------------------- Equipment and accessories: -With a removable crossbeam so that the consignment trolleys are unloaded State can be pushed into each other. -With 4 crane hooks, 4 forklift brackets and 4 lashing strap holders. -Mobile on 4 polyamide swivel castors Ø 150 mm, 2 of which have brakes. -Steering rollers can be removed, so the commission trolley can stand securely on the truck. -Other equipment and accessories as for RU-KWI. --------------------------------------- Technical details RU-KWI-1600S: - Length 1,720mm - Width 1,000mm - Height 1,950mm - System height 1,500 mm - Usable width 700 mm - Weight 85kg The painting is do ...

: gebraucht : 2021 : 3974 : prompt, Zwischenverkauf v : Spanien : 5100 € : 1 : 1 : 32 mm : MK 3 : 250 mm : 65 - 125 - 185 - 365 - 54 U/min : 1,8/2,6 kW : M24 : 600 mm : 640 mm : 2020 mm : 260 kg : 100 mm : 85 - 635 mm : 1.170 mm : 300 x 270 mm : 600 x 380 mm : 120 mm demo machine ERLO (MADE IN SPAIN) FOR DEMANDING WORKSHOP USE geardrive machine manual feed left-right drilling table with t-slots depth adustable end tool ejector drill guard CE norms user manual in GERMAN (sample photo) OPTIONS: lighting equipment € 231,-- coolant equipment and machine base with T-slots € 825,-- reverse for tapping € 737,-- DELIVERY TIME WITH OPTIONS APPROX. 6 WEEKS. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Carriage length: 3200 mm; Cutting width at width stop: 1270 mm; Cutting width at cut-to-length fence: 3200 mm; Cutting depth: 136.5mm; Vorritzer: Yes; Saw blade swivel range: +45Â; Height adjustment of saw blade: electric; Swivel adjustment saw blade: electric; Adjustment of width stop: manual; Display saw blade angle: digital display; Display cutting height: -; Display Width Stop: Scala; Display Cut-to-length ruler: Scala; Scoring gear adjustment: manual; Saw blade diameter: 400mm; Speeds: 4000 rpm; Motor power: 7kW; Suction connection: 80 and 120mm; Machine length: 3500mm; Machine width: 2200mm; Weight: 715 kg; TECHNICAL DATA Dimensions and Weights Weight (net) approx. 715kg connection Suction Suction nozzle diameter120mm Extraction nozzle diameter saw blade protection80mm Installation information transport width990mm Machine body length1900mm machine body Width/ ...

Drilling machine Peddinghaus TDK 1000/9 Peddinghaus LC 1250 Saw Peddinghaus Signo 05 Markierer Siemens Sinumerik control system Year of construction: 1990 Maximum width of the workpiece (90 degrees): 1000 mm The cutting unit can be rotated 45 degrees to the right and left. Maximum workpiece width (45 degrees): 700 mm Maximum workpiece height: 420 mm (drill) - 440 mm (chopper) Maximum hole diameter: 40 mm Number of drill bits: 9 (3-3-3) Maximum saw blade diameter: 1250 mm Saw blade width: 9 mm Total equipment weight: ~17.5 t Equipment pick-up size: - Drill: 5000 x 2100 x 3000 mm - Saw: 3500 x 1300 x 2500 mm - Marking: 1400 x 1200 x 1200 mm - Controller: 1200 x 1000 mm - Hydraulic power unit: 1000 x 500 mm

PROMA SPF-1000PH universal lathe was manufactured in 2019 in the Czech Republic. The machine is designed for precision machining of internal and external cylindrical, conical and end faces, as well as grooving, bar turning, drilling and threading with adjustable thread stroke size. The optimum rotation speed scale and high-quality cast iron construction, allows the use of high-speed steel and carbide-tipped tools. Workpieces with a maximum length of 1000 mm are machined in a fully illuminated workspace using a powerful spindle with 12 speed stages ranging between 25 and 1800 rpm. Among the extensive equipment of the conventional lathe are a SINO SDS6-3V digital readout and a 3-jaw universal chuck. The total weight of the PROMA SPF 1000PH machine is 2635 kg. Technical specifications of the PROMA SPF-1000PH lathe - maximum turning length: 1000 mm - maximum turning diameter (above t ...

-Exhibition Machine- The SUPERA-3015 A laser cutting machine is a general-purpose type with fiber laser. It offers high dynamics in high-speed cutting of thin sheets and they have the technology and know-how on board to produce stable and constant parts even for thicker material, where the maximum thickness is limited only by the output power of the laser. Standard equipment A SUPERA 3015 comes with the following standard equipment: An automatic shuttle table for an almost continuous cutting process Two cutting tables with support in the grid Boxes for scrap and dust removal under the working area of the machine KEBA – LTI control with virtually unlimited program memory Built-in laser pulse generator 21.5" touch screen operator panel with graphical user interface Mouse and keyboard Cutting head for fiber laser source Automatic selection of the gas valve to support two d ...

Pre-milling unit: yes; Pre-milling unit material removal: 0 - 2 mm; plastic edges: 0,4 - 3 mm; solid wood edges: 0,5 - 5 mm; Workpiece thickness: 8 - 50 mm; Minimum length of workpiece: 120 mm; Min. work piece width: 110 mm; Anti-adhesive spraying unit: yes; Edge preheating device: yes / with ceramic infrared lamp; Bonding unit: granulat / Glue container quick-change kit; Jack knife: yes; Flush trimming unit: yes; Corner copy unit: yes; Flush radius milling unit: yes; Radius scraper unit: yes; Area scraper unit: yes; Buffing unit: yes; Cleaning spray unit: yes; motor power: 5 kW; machine length: 3774mm; machine width: 1546 mm; machine height: 1337mm; weight: 842 kg; Top equipment for high productivity with low space requirements! Intuitive operation with the eye-S control and 10 large touchscreen: - HMI Maestro Active Edge - Graphic display of all processing units ...

Working width: 4500 mm Working height: 3000 mm Number of cylinders: 6 St. Dimensions (L/W/H): 5600x1350x3550 mm Weight: 3000 kg S&S frame press Bavaria 2000 L --------------------------------- With automatic pressing cycle + manual control for corner connections tenon + slots and dowel connection / mortised tenon, can be changed using a selector switch on the control cabinet. With basic equipment for the optional use of counter profiles if the sash is on loose part to be folded over. CE version Basic machine in the strongest welded frame, with thick-walled special hollow profiles. Guideways of the pressure bars for the press corners in a low-abrasion finish. Fast, smooth, manual width adjustment by ball-bearing carriage, fixation in 50 mm Hole grid, optional motorized width adjustment with with hydraulic clamping (surcharge). Height adjustment and pressing by long-stroke cylinder in one  ...

Number of spindles: 6 St. Working width: 230 mm Working height: 120 mm Length of the planing table: 2500 mm Feed motor: 4 kW Feed speed: 5-30 m/min. Weinig Powermat 400 with HSK/Powerlock, axial/radial CNC controlled ---------------------------------------------------------------------- - Short summary: ---------------------------------------------------------------------- - 6 spindles with 8,000 rpm 5 x HSK/Powerlock Axial and radial CNC adjustment of the spindles via control CNC - controlled adjustment and positioning of the feed Detailed description: ---------------------------------------------------------------------- - Technical specifications: Working width: 20-230 mm Working height: 8-120 mm Number of spindles: 6 1. Tool holder - below ------------------------------------------------ Motor with brake: 5.5 kW Spindle diameter: 40mm Speed: 6,000 rpm Tool flight circle: 93 - 160 mm ...

ENGEL INSERT 200H/50 injection moulding machine was manufactured in 2007 in Austria. The machine with its small size and large capabilities is used for e.g. overmoulding of inserts and the joining of various materials such as glass, metal and electronics. Thanks to the combination of a clamping force of 50 tonnes and high-quality components, the injection moulding machine guarantees excellent quality of inserts and high repeatability. The machine’s sturdy, solidly built construction features a convenient and easy-to-use ENGEL CC 200 CNC controller for entering all possible process parameters, such as mould clamping force and speed. Once the parameters have been entered, the two halves of the mould are precisely closed, after which the vertical injection moulding machine ENGEL generates a high clamping force. The mould cavity is carefully filled with plastic under high pressure using ...

DHE DEN HOLLANDER ENGINEERING: Used direct heating system for milk, cream, liquid egg, ice cream mix, etc. by DHE Equipment for the production of milk with a longer shelf life using the gentle process The product is heated to 65°C in counterflow, heated to 130°C by steam injection in less than 1 second and then cooled down again in a very short time by evacuation. Further cooling is carried out by the incoming product in counterflow and ice water. Extraordinarily gentle on the product process - closed supply tank - speed-controlled pumps - Homogenizing machine -Heater - Infusion container - Relaxation tank - Load steam condenser -Piping - Fittings and control cabinet - Measuring, regulating, controlling, recording and safety equipment - Connections for: steam, water, electricity, etc. - All system components mounted on a base frame in floor construction and mounted in containers Ca ...

Overview The filling line was manufactured in 2021 by the German company ALWID. The filling line is new and can fill  chemical products into plastic containers. With the exception of the bottle feeder and Posimat, glass bottles can also be processed. Due to ATEX certification, explosive products can be processed with the line. The equipment comes with a 2-year warranty (in single-shift operation) and all components of the equipment can be purchased separately.  Technical details Capacity: 9000 containers/h (varies according to bottle volume and product).  Container  Max. Diameter: 100mm  Max. Height: 300mm  Control Siemens S7 Single machines  Bottle Hopper | ALWID | POSIMAT-ACCESS-N15  Bottle feeder with hopper 2000 l, in stainless steel, chassis and supports in mild steel painted Positronic control system for optimal adaptation to downstream filler Machine, completely internally ...

Up to 100 products can be produced on one table. • automatic or semi-automatic production lines; • EU-standard; • Warranty 24 months. The tables are made of sturdy steel construction covered with steel plate. The service life of vibrating tables is up to 30 years. Tables can be equipped with hydraulic tilt function, built-in heating pipes and vibrators. The sizes of the tables can be ordered for the required panel sizes. SUMAB equipment for the production of interior and exterior wall panels includes: • various types of circulating and tilting vibration tables • turnkey house-building plants; • the possibility of full or partial reconstruction of old enterprises and the installation of modern equipment; • profitability of production, reduction of economic and production costs; • the optimal solution to start panel construction of high-quality and modern hous ...

TRUMPF TruLaser 3030 fiber laser built in Germany in 2013, is used for precision machining of workpieces made of structural steel, stainless steel, as well as brass and copper, thanks to special technology data packages equipped in the machine. The extremely efficient and reliable fibre-cutting technology expands the machining possibilities and allows to achieve very smooth and even edges. The laser cutting machine features a robust, durable design that prevents any vibrations from occurring during changes in direction. The enclosed laser body with lift-up roof and fixed guards effectively protect the operator during work. The axes are driven by a direct Torque drive (X-axis) and direct linear drives (Y-axis and Z-axis), which, combined with hardened guideways of the highest manufacture precision, ensure that high accelerations and working speeds are achieved. Generated by the reli ...

Fixed stop side on the left. Brief description of the equipment: - Fixed stop side left - Workpiece transport device - Upper pressure - Control Power Control PC22 - Release agent spraying unit - Joining milling unit, 2 x 3 kW - Gluing part A20 Basic for rolls up to 3 mm and strip goods up to 20 mm, with melting unit with granulate container and quick-clamping system - Cross-cut unit, 2 x 0.8 kW, with pneum. Dissimulation - Lubricant spray agggregat - Pre-milled aggreagt 1.5 kW, pneum. adjustable - Mould milling unit FK13, 2 x 0.4 kW - Universal milling unit 4 kW, controlled, with infinitely variable axis - Multi-plastering device MN21 autom. - Finishing unit FA11, with finishing device, detergent application and buffing unit, pneum. adjustable -Noise protection - Free space for additional processing units Further equipment information: - Machine stand throughout f ...

A Weiler Primus precision lathe with milling device is offered and extensive accessories in very good condition. A large part of the accessories are unused. Specifications: Center height 120 mm Distance between centers 420 mm Swing diameter over bed 245 mm Spindle bore 23 mm Spindle speeds 18 Speed range 60 - 3000 rpm Motor power 1.1 / 1.5 kW Motor spindle brake Large feed protection - chip protection hood External dimensions approx. Length 120cm Depth 750mm Height 170cm Weight approx. 500 kg Accessories: Multifix A - 5 steel brackets 3-jaw chuck Ø 125 mm 4-jaw chuck Ø 125 mm Various interchangeable jaws Thumper CGN-1969 Eccentric lathe chuck 80mm (unused) Face plate Carrier for rotary heart Standing bezel Moving bezel Collets for internal and external clamping Various moving bezels Extensive accessories for milling equipment such as clamping screws, cl ...

Vehicle data: Make: Clark, Type: Spicer 15.5HR 2741852 Transmission, Drive type: None, \Year of manufacture: 2007, Internal number: DIV1228, Mast data: Dimensions: Weight: 1000 kg, Battery & Charger: Description & Special equipment: Attachments: Special equipment: Front tyres: 0 x / Rear tyres: 0 x / / Description: Overhauled

Vehicle data: Make: Dana, Type: Spicer 13,7 HR32312-632X, Drive type: None, \Year of construction: 0, Internal number: DIV1201-1, Mast data: Dimensions: Battery & charger: Description & special equipment: Attachments: Special equipment: Front tyres: 0 x / Rear tyres: 0 x / / Description:

Vehicle data: Make: Linde, Type: Door LIN3944379144, Year of manufacture: 0, Internal number: DIV1344, Mast data: Dimensions: Battery & charger: Description & special equipment: Attachments: Special equipment: Front tyres: 0 x / Rear tyres: 0 x / / Description:

Granulator - Wanner D25.25m Location: Lodz, Poland Year of construction: 2007 Low-speed granulator with gearbox Power: 4 kW 4 stator knives, 12 rotor knives, the sieve - interchangeable Hopper inlet: 380x260 mm Grinding chamber opening: 270x200 mm It is very easy to clean the grinder, which is especially recommended if the color of the ground fabric is often changed Soundproofed mill All offered equipment is started by our service technicians before it is sold. It is possible to receive a video of the technical tests of the selected equipment or to participate in live technical tests at our company in Łódź. Price: On request

Temperature control unit of the tools - HB-Therm Series 4 HB-200 F2 (6 pcs.) Year of construction: 2005-2010 Location: Lodz, Poland Max. heating capacity - 200°C Heat transfer medium – oil Heating power: 8 kW Cooling capacity: 30 kW Device possesses: - a vacuum pump - a vacuum chamber - a function to extract medium from tools - the device can be integrated with the machine, unattended All offered equipment is started by our service technicians before it is sold. It is possible to receive a video of the technical tests of the selected equipment or to participate in live technical tests at our company in Łódź. Price: On request

Robots - Sepro Success 11 Year of construction: 2019 Location: Lodz, Poland 5-axis robots: 3 axes are driven by servo motors (electric); Axis B (revolution) and movement A Touch control panel The safety package for robots Robot with adapter All offered equipment is started by our service technicians before it is sold. It is possible to receive a video of the technical tests of the selected equipment or to participate in live technical tests at our company in Łódź. Price: On request

Sprue Picker - Geiger Handling Mini Servo 1,5 Year of construction: 2011 Location: Lodz, Poland X-axis servo-driven (electric), C-axis (rotation) All offered equipment is started by our service technicians before it is sold. It is possible to receive a video of the technical tests of the selected equipment or to participate in live technical tests at our company in Łódź. Price: On request

Temperature control unit for tools - Wittmann Basic-C90 Year of construction: 2015 Location: Lodz, Poland Max. heating capacity - 90°C Heat transfer medium – water Power: 10 kW Device possesses: - a vacuum pump - a vacuum chamber - a function to extract medium from tools - the device can be integrated with the machine, unattended All offered equipment is started by our service technicians before it is sold. It is possible to receive a video of the technical tests of the selected equipment or to participate in live technical tests at our company in Łódź. Price: On request