british flag
Resale Logo

equipment used machine for sale on RESALE.INFO
all categories

back back
 banner advertisement information used store equipment  USEDmarket GmbH  http://www.usedmarket.com 
banner logo
start page > keywords equipment > results
maximum number of results exceeded > 1000
please refine your search
1000 items ordered by
post used machinery     
No. Cat. Photo Manufacturer | Model
Type of machinery
Year Price Country Contact
 page 1  > 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18
125480021 305

MADE IN ITALY mm.300 for sale
SEMI-AUTOMATIC HYDRAULIC SCREENCHANGER


SEMI-AUTOMATIC HYDRAULIC SCREENCHANGER for extruders 130 to 160 mm diam. sliding plate made in special steel alloy hydraulic piston movement 3 heating areas n.2 removable filtering sections diam. 298 mm. sliding ...

 
SEMI-AUTOMATIC HYDRAULIC SCREENCHANGER

for extruders 130 to 160 mm diam.
sliding plate made in special steel alloy
hydraulic piston movement
3 heating areas
n.2 removable filtering sections diam. 298 mm.
sliding between 2 bronze rings
operated by 2 push buttons
termoregulated by control panel
 
15,000   
  IT   request
125499266 109

AJAN SHP 260A for sale
Plasma cutter AJAN


Plasma cutter AJAN SHP 260A is a numerically controlled oxygen sheet cutting device, using original cutting tools mounted on it, and can be gas and plasma tools. With these tools you can make straight cuts and linear cut ...
used machine
 
Plasma cutter AJAN SHP 260A is a numerically controlled oxygen sheet cutting device, using original cutting tools mounted on it, and can be gas and plasma tools. With these tools you can make straight cuts and linear cuts, according to programmed cutting programs or by manually controlling the cutting path. Condition of the equipment good.
2015
34,500 EU?  
  PL   request
125479962 1800

VITA CUBE Vita Cube for sale
Ultrasonoscopes


Ultrasonic device Vita cube year 2010
used machine
 
Ultrasonic device Vita cube year 2010
2010
Price  
    request
125498902 905

Schredder RF 195 / 400 - Verkauf an Bestbieter for sale
Silo unloading equipment


2017
Price  
  AT   request
125479938 109

AGIE EMS 2 - 20 for sale
Die-Sinking Spark Erosion Machine Tools


2-20 06-01-011 Jig AGIE EMS delivery time: immediately number: 06-01-011 manufacturer: AGIE type: EMS 2-20 MACHINE data year: approx. 1987 L x W x H: approx. 1800 x 1800 x 2000 mm weight: 800 kg Very good general c ...
used machine
 
2-20 06-01-011 Jig AGIE EMS delivery time: immediately number: 06-01-011 manufacturer: AGIE type: EMS 2-20

MACHINE data year: approx. 1987 L x W x H: approx. 1800 x 1800 x 2000 mm weight: 800 kg

Very good general condition specifications digital display: 3 - axes (memo 212) 3 R - rotation spindle: approx. 0-200 mm electrode consumption: approx. Ã? 20 mm traverse path: X - axis: approx. 320 mm Y - axis: approx. 220 mm Z - axis: approx. 385 mm maximum workpiece size: approx. 490 x 370 x 340 mm maximum workpiece weight: 600 kg travel - EDM head: approx. 200 mm accessories â?¢ 3 R - rotation spindle incl. speed control 3 R 8 and compressed air regulator â?¢ various electrode holder â?¢ dielectric â?¢ fire-extinguishing Deugra KLZ - A â?¢ complete Ma schinendokumentation additional equipment on request price and other specifications on request
1987
Price  
    request
125494826 107

HERA UM II for sale
Folding Machine


sheet width: 3000 mmplate thickness: 2,00 mmdistance between columns: mmtotal power requirement: kWweight of the machine ca.: 2,7 tdimensions of the machine ca.: 4,00 x 1,00 x 1,30 mEquipment:- Bend angle adjustable vi ...
used machine
 
sheet width: 3000 mm
plate thickness: 2,00 mm
distance between columns: mm
total power requirement: kW
weight of the machine ca.: 2,7 t
dimensions of the machine ca.: 4,00 x 1,00 x 1,30 m
Equipment:
- Bend angle adjustable via potentiometer
- Height of the upper boom infinitely adjustable
- manual, semi-automatic and automatic mode possible



This ad was created with MODUL MWS - the software solution of LogoTech.
1977
Price  
    request
125479936 106

SCHULER PSt 250-10-400 for sale
Mechanical Presses


Press Schuler PSt 250-10-400 The machine is in good technical condition. Crimping force: 250t Number of Instrument Stations: 8 + 1 Band width: 630mm Band feed: 0-630mm Sheet thickness: max. 4mm Bearing weight: 450 ...

 
Press Schuler PSt 250-10-400
The machine is in good technical condition.
Crimping force: 250t
Number of Instrument Stations: 8 + 1
Band width: 630mm
Band feed: 0-630mm
Sheet thickness: max. 4mm
Bearing weight: 4500kg
External diameter max. 1200mm
Internal diameter from-to: 410-480mm
Engine 60kW
Dimensions of the press: 6225 x 3100 x 8425 mm
Including unwinding and straightening equipment and transfer.
Upon agreement, possible to test.
 
Price  
  SK   request
125494818 107

EDWARDS PEARSON/BEYELER RT4 250/4100 for sale
Hydr. pressbrake


pressure: 250 tchamfer lenght: 4100 mmControl: CYBELEC DNC 880S weight of the machine ca.: 20000 kgdimensions of the machine ca.: 5000x2000x3100 mmRetrofit:- CYBELEC DNC 887s 7 axlesDomestic equipments:- light grid- CNC  ...

 
pressure: 250 t
chamfer lenght: 4100 mm
Control: CYBELEC DNC 880S
weight of the machine ca.: 20000 kg
dimensions of the machine ca.: 5000x2000x3100 mm
Retrofit:
- CYBELEC DNC 887s 7 axles

Domestic equipments:
- light grid
- CNC controlled backgauge: X-X1-R-Z1-Z2
- reinforced and adjustable vertical front stops incl. handwheel and
parking position
- hydr. upper tool clamping
- Hydraulic valves brought to the current UVV status in 2016
- CNC hydraulic crowning



This ad was created with MODUL MWS - the software solution of LogoTech.
 
Price  
    request
125479897 1405

Trolley, chain hoist, crane and hoist


Tensile strength: 500 kg Please refer to the illustrations for more details (see type plate) or on request. Pick up in Neubrandenburg, delivery possible. Loading possible. More information on request, sales as sho ...

 
Tensile strength: 500 kg

Please refer to the illustrations for more details (see type plate) or on request.
Pick up in Neubrandenburg, delivery possible. Loading possible.

More information on request, sales as shown (see pictures). Changes and error in the technical details and information and subject to prior sale.
 
Price  
    request
125494820 107

HERA COP for sale
Hydr. pressbrake


pressure: 300 tchamfer lenght: 4100 mmdistance between columns: 3550 mmMachine No.: 5083 weight of the machine ca.: 24.000 kgdimensions of the machine ca.: 5000x2000x3100 mmNew controller: DNC 884sPSDomestic equipments:- ...
used machine
 
pressure: 300 t
chamfer lenght: 4100 mm
distance between columns: 3550 mm
Machine No.: 5083
weight of the machine ca.: 24.000 kg
dimensions of the machine ca.: 5000x2000x3100 mm
New controller: DNC 884sPS
Domestic equipments:
- CNC controlled X & R axis
- CNC controlled crowning
- hydraulic stamp clamping
- Fiessler safety light barrier



This ad was created with MODUL MWS - the software solution of LogoTech.
1992
Price  
    request
125479882 2500

MACCHINARI ATTREZZATURE for sale


For sale exclusively on next 26/06/2018,at 10-30 in Bergamo (BS) For more information contact us at 030 – 7751645 between 9-13, 14-18 MACHINERY: -5 Slot machines -lot composed # 4 Jukebox with cd -Electric linkage ...

 
For sale exclusively on next 26/06/2018,at 10-30 in Bergamo (BS)
For more information contact us at 030 – 7751645 between 9-13, 14-18
MACHINERY:
-5 Slot machines
-lot composed # 4 Jukebox with cd
-Electric linkage ARMANNI MASTER LIGHT 105/29, capacity kg 1000 of 2001
-pallet truck 2000 kg pallet truck 2000 kg
-lot workshop
Equipment:
-metal shelf L = 120, 6 2 uprights and shelves
-Iron shelving, shelves and uprights 48 16 L = 120
-iron and wood stair with landing, 4 risers, trundle
-Blue iron rack, 3 uprights H = 300, 2 uprights H = 250, 26 traverse L = 150 and 2 crossbars L = 120
-aluminium staircase with landing
-Blue iron shelving H = 300, 21 2 uprights, crossbars L = 200, 118 traverse L = 120, 14 traverse L = 150... ETC, etc, etc.
-detailed catalogue Available.
 
4,635 €  
  IT   request
125494544 1900

Office Equipment


Weight approx.: 500 kgDimensions (l x w x h) approx.: 4000 x 2400 x 1000 mmDescription: Desk approx. 1700 x 1000 mm, conference table approx. 2200 x 1200 mm, with seating, without PC, telephone and electronics, roller fu ...

 
Weight approx.: 500 kg
Dimensions (l x w x h) approx.: 4000 x 2400 x 1000 mm
Description: Desk approx. 1700 x 1000 mm, conference table approx. 2200 x 1200 mm, with seating, without PC, telephone and electronics, roller furniture, see photos
 
Price  
  DE   request
125479876 309

RETSCH SM 2000 for sale


Powerful granulator for batch or continuous crushing of tough, medium-hard, soft, tough, elastic, fibrous and temperature-sensitive materials (E.g. spices and drugs slightly oily) or heterogeneous material mixtures. Easy ...

 
Powerful granulator for batch or continuous crushing of tough, medium-hard, soft, tough, elastic, fibrous and temperature-sensitive materials (E.g. spices and drugs slightly oily) or heterogeneous material mixtures. Easy to clean.

Equipment: Power 695 rpm at 50 HZ 1500 Watt rated output screen size 4 x 4 mm 6-disc rotor with 18 interchangeable indexable carbide multi-purpose 5 litre container cascade funnel-wide 550 x height 1415 x depth 600 mm weight 119 kg
 
Price  
    request
125494545 1900

Office Equipment


Weight approx.: 400 kgDimensions (l x w x h) approx.: 3000 x 2400 x 1500 mmDescription: Conference table, sideboard, desk, without PC, telephone and electronics

 
Weight approx.: 400 kg
Dimensions (l x w x h) approx.: 3000 x 2400 x 1500 mm
Description: Conference table, sideboard, desk, without PC, telephone and electronics
 
Price  
  DE   request
125479866 1402

DUAL LIFT EN1808//P509//CE18 for sale
Wire rope hoist, winch, winch pass


Dual lift winch AS GOOD AS NEW 14 working hours also to passenger transport Manufacturer: Dual lift Year of construction: 2012 Type of winch: EN 1808/P509 / / CE18 Load capacity: 600 kg Line speed: 18 m / min  ...
used machine
 
Dual lift winch
AS GOOD AS NEW
14 working hours
also to passenger transport
Manufacturer: Dual lift
Year of construction: 2012
Type of winch: EN 1808/P509 / / CE18
Load capacity: 600 kg
Line speed: 18 m / min

For further details see nameplate or on request.

Pick up possible. Delivery possible. Loading possible.

More information on request, sales as shown (see pictures). Changes and error in the technical details and information and subject to prior sale.
2012
Price  
    request
125494547 1900

Office Equipment


Weight approx.: 250 kgDimensions (l x w x h) approx.: 4000 x 2400 x 2000 mmDescription: 4 desks, sideboard, without PC, telephone and electronics

 
Weight approx.: 250 kg
Dimensions (l x w x h) approx.: 4000 x 2400 x 2000 mm
Description: 4 desks, sideboard, without PC, telephone and electronics
 
Price  
  DE   request
125479860 1800

TISCH-PUNKT-SCHWEIßGERÄT Renfert Typ6 ET-KB for sale
Table point welding machine Renfert type6 ET KB


Fabrikationsnr.: TRIP LA, 12062

 
Fabrikationsnr.: TRIP LA, 12062
 
Price  
    request
125494549 1900

Office Equipment


Weight approx.: 350 kgDimensions (l x w x h) approx.: 4000 x 2400 x 2200 mmDescription: Angled desk, angled wall unit, without PC, telephone and electronics

 
Weight approx.: 350 kg
Dimensions (l x w x h) approx.: 4000 x 2400 x 2200 mm
Description: Angled desk, angled wall unit, without PC, telephone and electronics
 
Price  
  DE   request
125479858 1800

ARTIKULATOR SAM Type 1 for sale
Articulator


Articulator SAM type 1

 
Articulator SAM type 1
 
Price  
    request
125494552 1900

Office Equipment


Weight approx.: 500 kgDimensions (l x w x h) approx.: 4000 x 2400 x 2200 mmDescription: 3 desks, wall unit, sideboard, desk 1800 x 900 mm, without PC, telephone and electronics

 
Weight approx.: 500 kg
Dimensions (l x w x h) approx.: 4000 x 2400 x 2200 mm
Description: 3 desks, wall unit, sideboard, desk 1800 x 900 mm, without PC, telephone and electronics
 
Price  
  DE   request
 page 1  >
You didn't find your wanted machine?   to all dealers(no registration necessary)
More models (2 or more machines):
(17)
sell machinery
Sell your machinery
to the price starting with only € 0.09 monthly per machine!
machinery sold

Sold machinery

MACCHINARI ATTREZZATURE


For sale exclusively on next 26/06/2018, 10-30 hours in Bergamo (BS) For more information contact us at 030 – 7751645 between 9-13, 14-18 MACHINERY: -5 Slot machines -lot composed # 4 Jukebox with cd -Electric linkage ARMANNI MASTER LIGHT 105/29, capacity kg 1000 of 2001 -pallet truck 2000 kg pallet truck 2000 kg -lot workshop Equipment: -metal shelf L = 120, 6 2 uprights and shelves -Iron shelving, shelves and uprights 48 16 L = 120 -iron and wood stair with landing, 4 risers, trundle -Blue iron rack, 3 uprights H = 300, 2 uprights H = 250, 26 traverse L = 150 and 2 crossbars L = 120 -aluminium staircase with landing -Blue iron shelving H = 300, 21 2 uprights, crossbars L = 200, 118 traverse L = 120, 14 traverse L = 150....... ETC, etc, etc. -detailed catalogue Available.

CNC Turning Machines Colchester TORNADO 200


OVERVIEW: Brand: Colchester Model: TORNADO 200 Application type: Turning Machine type: Lathe Availability: Immediately Construction year: 1995 Production hours: 5900 Location: Germany Origin country: England GENERAL DATA: Measurements width: 2455 mm Measurements depth: 1420 mm Machine weight: 3000 kg MAIN DRIVE: Number of spindle: 1 Spindle speed range: 5000 1/min CONTROL UNIT: Brand: GE FANUC Model: Series O-T MOVEMENT: X-AXIS movement: 215 mm Z-AXIS movement: 400 mm WORKPIECE: Workpiece drm: 250 mm TURRET: Number of turrets: 12 TOOLS: Max tool diameter: 40 mm MEDIA: Power consumption: 45 kVA Chip conveyer: yes Internal cooling: yes ADDITIONAL EQUIPMENT: 1 - 29x Tool holder

CNC Bending Machines Durma AD-S 30100


OVERVIEW: Brand: Durma Model: AD-S 30100 Application type: Bending Machine type: Bending Machine Availability: Immediately Construction year: 2013 Production hours: 18979 Location: Turkey Origin country: Turkey GENERAL DATA: Measurements width: 2600 mm Measurements depth: 4500 mm Measurements height: 3100 mm Machine weight: 9500 kg MAIN DRIVE: Pressing force: 100 kN Bending length: 3050 mm CONTROL UNIT: Brand: CYBELEC Model: ModEva 10S MEDIA: Main electronic connection: 400 V Power consumption: 11 kVA ADDITIONAL EQUIPMENT: 1 - Tools 2 - Back Guard with safety switch 3 - Laser Light Front Guards

Beverage packaging equipment Tetra pak TSA 36


Pipe Bending Machines BLM SMART


OVERVIEW: Brand: BLM Model: SMART Application type: Bending Machine type: Bending Machine Availability: Immediately Construction year: 2015 Production hours: 948 Location: Estonia Origin country: Japan GENERAL DATA: Machine weight: 720 kg CONTROL UNIT: Brand: SIEMENS Model: SIMATIC HMI MEDIA: Main electronic connection: 400 V Power consumption: 11 kVA ADDITIONAL EQUIPMENT: 1 - BLM CARM7 Bar loader 2 - YASKAWA Motoman Robot

Vertical Milling Machines DECKEL FP4A


OVERVIEW: Brand: DECKEL Model: FP4A Application type: Milling Machine type: Milling Machine Availability: Immediately Construction year: 1991 Production hours: 32000 Location: Netherlands Origin country: Germany GENERAL DATA: Measurements width: 3000 mm Measurements depth: 2700 mm Measurements height: 1630 mm Machine weight: 1950 kg MAIN DRIVE: Number of spindle: 1 Spindle speed range: 4000 1/min CONTROL UNIT: Brand: Grundig Model: Dialog 11 MOVEMENT: X-AXIS movement: 560 mm Y-AXIS movement: 500 mm Z-AXIS movement: 390 mm WORKPIECE: Workpiece drm: 80 mm Workpiece x: 485 mm Workpiece y: 385 mm Workpiece z: 380 mm Workpiece weight: 800 kg TABLE: Outer length: 900 mm Outer width: 530 mm TOOLS: Max weight: 450 kg Max tool diameter: 40 mm Max tool length: 150 mm MEDIA: Main electronic connection: 380 V Power consumption: 16.5 kVA Internal cooling: yes ADDITIONAL EQUIPMENT: 1 - 1x Tool holder

Automatics (Lathes) For Bars Colchester TORNADO T8MS


OVERVIEW: Brand: Colchester Model: TORNADO T8MS Application type: Turning Machine type: Lathe Availability: Immediately Construction year: 2007 Production hours: 1112 Location: Latvia Origin country: United Kingdom GENERAL DATA: Measurements width: 1650 mm Measurements depth: 4000 + 1800 mm Measurements height: 1950 mm Machine weight: 5000 kg MAIN DRIVE: Number of spindles: 2 Spindle speed range: 5000 1/min CONTROL UNIT: Brand: GE Fanuc Model: Series 18i-TB MOVEMENT: X-AXIS movement: 240 mm Z-AXIS movement: 540 mm A-AXIS movement: 625 mm TURRET: Number of turrets: 12 MEDIA: Main electronic connection: 415 V / 53 A / 50 Hz / 3 P Chip conveyer: yes ADDITIONAL EQUIPMENT: 1 - Chip conveyer 2 - Bar loader 3 - Tools (upon request)

CNC Long Turning Automatics POLYGIM DIAMOND 32 CSB SWISS TYPE


Automatic longitudinal turning Swiss POLYGIM DIAMOND CSB 32 SWISS TYPE was built in 2008. Technical data for CNC lathes POLYGIM DIAMOND CSB 32 SWISS TYPE: CNC Control: MITSUBISHI Working range: -maximum turning diameter: fi 33 mm -maximum turning length: 250 mm -the maximum diameter of drilling: fi 15 mm -the maximum diameter of the thread: M10 Processing of external diameters: -quantity: 5 PCs. -dimension of the CAP: 16 x 16 x 120 mm Treatment of internal diameter: -quantity: 4 PCs. -Sleeve dimension: 13 mm (ER20) Transverse driven tool:-number of tools: 3 PCs. -Sleeve dimension: 13 mm (ER20) -speed: 200-6000 RPM. Tools from the back to the internal diameter: -quantity: 4 PCs. -Sleeve dimension: 13 mm (ER20) Tool driven to face: -number of tools: 3 front, 3 rear -Sleeve dimension: 10 mm (ER16) -speed: 3000 rpm. Main spindle:-spindle bore diameter: fi 36 mm -spindle speed: 200-8000 RPM. -Spindle bore diameter: subspindle steals: fi 36 mm -spindle speed steals: 6000 RPM. -the maximum spindle stroke: 220 mm rapid feeds X, Y, Z: 18 m/min. Engines: -spindle motor: 5.5 kW -spindle motor steals: 1.5 kW -drive motors. X/Y/Z axis: 0.5 kW -Coolant pump motor: 0.55 kW -lubrication: 4 -power supply: 8.67 kW -the spindle axis height: 960 mm Machine dimensions:-overall dimensions: 2550 x 1140 x 1568 mm -weight: 2788 kg Compressed air supply: -Outlook: 10 l/min. -pressure: 5 kg/cm Equipment: -subspindle -lighting of the workspace -cooling system -orientation of przeciwwrzeciona every 5 degrees -sensor cut off part-receiver detail -Guide ring Rod fixed and Rotary -5 pieces of the outer surface of the turning handles -4 desktop holders for turning the inner surface of the -4-position for desktop tools for turning the inner surface of the rear -6-powered tool for working the transverse -3 to-powered tool to work from the front -3 to-powered tool to work from behind -automatic bar feeder: Fedek SUNNY 542 (3.2 m) -chip conveyor

HEIDELBERG SM52-2


D235 HEIDELBERG SM52-2 (Year 1997) Alcolor dampening / Autoplate / Automatic wash-up equipment / Automatic size setting from feeder / App. 35 mio. Impressions Machine is in very good working condition. Available: Immediately

Turning Machines (Lathes) NAKAMURA-TOME TW-20 MMY


OVERVIEW: Brand: NAKAMURA-TOME Model: TW-20 MMY Application type: Turning Machine type: Lathe Availability: 01/08/2018 Construction year: 1997 Production hours: 35200 Location: Turkey Origin country: Japan GENERAL DATA: Measurements width: 3645 mm Measurements depth: 2179 mm Measurements height: 2200 mm Machine weight: 6500 kg MAIN DRIVE: Number of spindles: 2 Spindle speed range: 50-5000 1/min CONTROL UNIT: Brand: FANUC Model: Series 18-T MAIN DRIVE: X-AXIS movement: 195 mm Y-AXIS movement: 40 mm Z-AXIS movement: 265 mm WORKPIECE: Workpiece drm: 51 mm TURRET: Number of turrets: 2 TOOLS: Max tool diameter: 25 mm MEDIA: Main electronic connection: 50 Hz / 3 P Power consumption: 77 kVA Chip conveyer: yes Internal cooling: yes ADDITIONAL EQUIPMENT: 1 - Kamsan Bar Loader 2 - 1x 0° Live Tool 3 - 1x 90° Live Tool

Turning Machines (Lathes) NAKAMURA-TOME W-20 MMY


OVERVIEW: Brand: NAKAMURA-TOME Model: TW-20 MMY Application type: Turning Machine type: Lathe Availability: 01/08/2018 Construction year: 1995 Production hours: 1637 Location: Turkey Origin country: Japan GENERAL DATA: Measurements width: 3645 mm Measurements depth: 2179 mm Measurements height: 2200 mm Machine weight: 6500 kg MAIN DRIVE: Number of spindles: 2 Spindle speed range: 50-5000 1/min CONTROL UNIT: Brand: NAKAMURA-TOME Model: LUCK-BEI MAIN DRIVE: X-AXIS movement: 195 mm Y-AXIS movement: 40 mm Z-AXIS movement: 265 mm WORKPIECE: Workpiece drm: 51 mm TURRET: Number of turrets: 2 TOOLS: Max tool diameter: 25 mm MEDIA: Main electronic connection: 50 Hz / 3 P Power consumption: 77 kVA Chip conveyer: yes Internal cooling: yes ADDITIONAL EQUIPMENT: 1 - IEMCA Bar Loader 2 - 1x 0° Live Tool 3 - 1x 90° Live Tool 4 - Loading Robot

Tube Bending Machines SCHWARZE WIRTZ PERFEKT WE 100 D T870


Bender socket key SCHWARZE WIRTZ PERFEKT in 100 D T870 built in 1975. Hydraulic bending machine for tubes with electro-hydraulic control system, as well as with pressure device sliding Rails and with hydraulic mandrel drawing inferences is intended primarily for tube bending with mandrel. Specific data: -maximum capacity: 114 mm tube diameter x 6.3 mm wall thickness (for maximum tensile strength 45 kp/mm2) -maximum torque resistance: 55 cc -minimum pipe diameter: 22 mm -the maximum bending radius: 500 mm -minimum bending radius: 50 mm -the maximum bending angle: 180 degrees -the length of the plate shaft steady rest: 4000 mm -bending direction: right -the maximum bend speed, running forward: 0-3.25 RPM continuous adjustment -the maximum bend speed, running back: 5.4 RPM. constant -main motor power: 22 kW -total power requirement: 25 kW Equipment for bending SCHWARZE WIRTZ PERFEKT in 100 D T870: -hydraulic bending with mandrel -traffic control creep -automatically select angle -the length limiter system with 4 fingers przyporowymi -mandrels to sections: 20 PCs. -dies holding the pipe bending: 16 PCs.

Turning Machines (Lathes) DMG MORI NLX 2500/500


OVERVIEW: Brand: DMG MORI Model: NLX 2500/500 Application type: Turning Machine type: Lathe Availability: Immediately Construction year: 2014 Production hours: 3171 Location: Hungary Origin country: Japan GENERAL DATA: Measurements width: 2200 mm Measurements depth: 1900 mm Measurements height: 1826 mm Machine weight: 4200 kg MAIN DRIVE: Number of spindles: 1 Spindle speed range: 4000 1/min CONTROL UNIT: Brand: DMG MORI ERGOLINE Model: CELOS MAIN DRIVE: X-AXIS movement: 260 mm Z-AXIS movement: 500 mm TURRET: Number of turrets: 1 ADDITIONAL EQUIPMENT: 1 - Power transformer 2 - Tool setter

Radial Drilling Machines Z 3050 X 16


Radial drilling machine with 3050 X 16 was built in 1989. This versatile general-purpose machine. It is suitable for drilling, countersinking, reaming, chamfering and thread cutting medium and large items. With the right equipment it is also possible to boring. Technical data drilling machine Z3050 X 16: -the maximum drilling diameter: 50 mm maximum range: 1600 mm -the maximum distance between the axis of the spindle and the column: 1600 mm -the minimum distance between the spindle axis and column: 350 mm -horizontal spindle head on your shoulder: 1250 mm -maximum distance from spindle face to the working surface of the base plate: 1220 mm (1250 mm) -minimum distance from spindle to base plate working surface: 320 mm (350 mm) -vertical stroke in column: 580 mm -arm lifting speed: 0.02 m/sec. -angle of rotation of the arm: 360 degrees -taper in the spindle: Morsea Nr. 5 -spindle speed range: 25-2000 RPM. -number of spindle speeds: 16 PCs. -feed range: 0.04-3.2 mm/Rev. -the amount of feeds: 16 PCs. -extension: 315 mm -depth of feed per rotation of graduated: 122.5 mm -maximum permitted torque on the spindle: 490 Nm -maximum permitted weight spindle: 15680 N -the power of main motor: 4 kW -engine power lifting arm: 1.5 kW -engine power the hydraulic lock: 0.75 kW -Coolant pump motor power: 0.09 kW -overall dimensions (l x w x h): 2500 x 1060 x 2655 mm -weight of the machine: ok. 3500 kg (3900 kg with a column guide)

Turning Machines (Lathes) SPINNER TC80077 SMCY


OVERVIEW: Brand: SPINNER Model: TC80077 SMCY Application type: Turning Machine type: Lathe Availability: Immediately Construction year: 2008 Production hours: 19461 Location: Hungary Origin country: Germany GENERAL DATA: Measurements width: 4923 mm Measurements depth: 1980 mm Measurements height: 2090 mm Machine weight: 7500 kg MAIN DRIVE: Number of spindles: 1 Spindle speed range: 4000 1/min CONTROL UNIT: Brand: SIEMENS Model: SINUMERIK 840D MAIN DRIVE: X-AXIS movement: 360 mm Z-AXIS movement: 980 mm ADDITIONAL EQUIPMENT: 1 - High pressure external cooler 2 - VDI 40 tool holder 3 - Electrostatic external air filter

Plasma cutter ECKERT JANTAR 2


Plasma cutter ECKERT JANTAR 2 was built in 2008. The basic technical data cutting ECKERT JANTAR 2:-working width with 2 suportach burners: 2000 mm -cutting length: 6000 mm -the length of the road: 5000 mm -passage speed: 0-20000 mm/min. -cutting thickness (with one burner HARRIS): 100 mm -the type of flammable gas: propane, acetylene, APACHI, natural gas -format programming: ESSI -positioning accuracy: 0.05 mm -supply voltage: 50 Hz/230V/+-5% Part of the basic equipment cutting device JANTAR-2 includes: -computer control system CNC ECS 859:1 PCs. -torch cutting nozzles HARRIS: set of 3/palnik -Central gas Splitter: 1 PCs. -beam portal with guides on the gas hoses and electric cables: 1 set. -the longitudinal rails made of roadway (2000 mm cutting workspace): 1 set. -drive unit wzd?u?my (double-sided): 1 set. -drive unit: 1 set.

Eccentric Presses SMERAL LENP 40 A


Eccentric press SMERAL PRESSES OFFERING LENP 40 and was produced by the machine manufacturer SMERAL PRESSES OFFERING. Machine SMERAL PRESSES OFFERING LENP 40 and was built in 1977. Technical parameters of the press SMERAL PRESSES OFFERING LENP 40 and: -maximum pressure: 40 t -outreach: 220 mm -the range of adjustment stroke: 8-90 mm -adjustment range slider: 60 mm -the gap between the slider and a table with a maximum of spring, in the lower turning point on the wykr?conym a: 250 mm -between the walls of the body: 250 mm -lower table: 630 x 430 mm -bore in a slider-diameter/height: 40/75 mm -the maximum number of strokes per minute slider (continuous operation): 67 1/min -the number of possible jumps-the largest number of individual jumping: 60 1/min -the minimum length of the pitch slider: 8 mm -maximum length of the pitch slider: 90 mm -pitch fastening grooves: 280 mm -the dimensions of grooves in the table: 22 x 38 x 16 x 27 mm -the dimensions of grooves in the disc table: 22 x 37 x 16 x 27 mm mounting holes diameter/distance mounting holes: 24/200/580 degrees -draft: 28 degrees -mounting plate thickness: 60 mm -through hole in mounting plate: 200/220 mm -through hole in the interface plate/height weaning: 100/20 mm -main motor power: 3 kW (1420 RPM) -air consumption for one include: 4 l -basic power supply: 3 x 380/220 V 50/60 Hz -dimensions (l x w x h): 1080 x 1530 x 2110 mm -weight of the machine: 2480 kg Eccentric presses equipment SMERAL PRESSES OFFERING LENP 40A: -an intermediate table -foot control -set covers -DTR (technical motor)

Injection molding machines Krauss Maffei 650-3000-2300 BZ


OVERVIEW: Brand: Krauss Maffei Model: 650-3000-2300 BZ Application type: Injection Moulding Machine type: Injection Moulding Machine Availability: Immediately Construction year: 1996 Production hours: 23471 Location: Germany Origin country: Germany GENERAL DATA: Measurements width: 11000 mm Measurements depth: 2800 mm Measurements height: 4600 mm Machine weight: 45000 kg CONTOL UNIT: Brand: Krauss Maffei Model: MC4 INJECTION UNIT: Stroke volume: 1096/2411 cm³ Injection pressure: 1254 bar Screw diameter: 100/70 mm CLAMPING UNIT: Clamping force: 6500 kN Opening stroke: 1750 mm Ejector stroke: 250 mm MEDIA: Main electronic connection: 400 V Internal cooling: yes ADDITIONAL EQUIPMENT: 1 - 2x Injection unit 2 - KUKA robot 3 - Turning plate (upon request)

CNC Turning Machines MATRA FUL 510x1000


CNC lathe MATRA FUL 510x1000 was produced in 2000. CNC lathe-specific data MATRA FUL 510x1000: -CNC control in Polish and German: Fagor 8055TC (the machine you can program the g code or supplement the ready field in marker overlays) machine reads dxf drawings -Turning length: 1000 mm -turning diameter: 510 mm -spindle speed: 5-2000 RPM -Chuck: fi 250 hydraulic head: 8 items VDi30 -extracted Bridge: increases the diameter of component manufacturing -taper tailstock: Morsea 5 -installed power: 13 KVA -size Lathes (l x w x h): 2500 x 1800 x 1900 mm -machine weight: 2.5 tons of equipment: a variety of high-quality knives for turning the company ISCAR

Heavy Lathes POREBA TCA 160


Heavy lathe POREBA TCA 160 was produced in 1959 by the famous Polish FUM POREBA. Technical data of lathe POREBA TCA 160: Scope of work:-height of tusks: 800 mm -maximum turning diameter over bed: 1600 mm -maximum turning diameter over support: 1300 mm -eyepiece: fi 800 mm -maximum turning diameter in the pó?okularze: 250 mm -maximum turning length: 6000 mm -maximum weight of workpiece between centers in: 16000 kG -permissible cross section of the chip (turning steel Rr = 60 kG/mm2) on a single support: 30 mm2 -permissible cross section of the chip (turning steel Rr = 60 kG/mm2) on a single support: 50 mm2 -permissible force on the knife: 6000 kG -the maximum torque at the spindle: 630000 kg.cm -the maximum cross section 70 x 70 mm knife: Cap Headstock: -number of spindle speeds: 24 n -the exponent of the speed: 1.25 -spindle speed range: 1,12-224 RPM., 1,12-224 r/min, 0.85-170 RPM. -front spindle neck diameter: 260 mm -slot in the spindle of the cone metric: # 120 -reducing Bush metric cone Tip: # 120/80 -spindle bore diameter: 105 mm -diameter of the blade Cap: 1600 mm Suport, feeds the normal: -20 longitudinal feed range: 0,19-5,0 mm/Rev. -20 transverse feed range: 0,095-2.5 mm/Rev. -20 feed on the upper tray of the range: 0,095-2.5 mm/Rev. Suport, feeds 8-20 longitudinal feed range: 1.5-40 mm/Rev. -20 transverse feed range: 0.75-20.0 mm/Rev. -20 feed on the upper tray of the range: 0.75-20.0 mm/Rev. Suport, feeds minute:-20 longitudinal feed range: 12-320 mm/Rev. -20 transverse feed range: 6-160 mm/Rev. -20 feed on the upper tray with a range: 6-160 mm/Rev. Suport, feeds to thread (the main screws. train.):-35 thread jumping metrycz. about t. : 1-50 mm -jumping 35 inch threads range: 24-1/2 scroll/inch Suport, feeds for threading on the top tray:-25 thread jumping metrycz. about t. 0.25-7 mm -jumping 35 inch threads/inch scroll: the scroll 28-3/inch Feed rates associated to the rolling cones of gradients creating: 1:1.5 (d) 1:1000 -rapid traverse: 4000 mm/min. Konik: -barrel diameter: 200 mm -stroke sleeve: 600 mm -slot in the spindle sto?. meter.: # 80 -radial offset: +-30 mm Glasses: -diameter adjustment range normal: 200-600, 200-500 equipment, okular, 300-800 mm -adjustment range of diameters okular special equipment: 30-300, 50-400, 200-500 mm Pó?okular: -adjustment range pó?okulara diameter: 50-250 mm Drive:-main motor power: 40 kW -the engine speed: 750 RPM. -rapid feed motor power: 2.2 kW -the engine speed rapid feed rate: 3000 rpm. -oil pump motor power: 0.37 kW -engine oil pump: 1500 rpm. -performance oil pump: 25 l/min. Sizes and weights: -distance between centres: 3000-15000 mm -weight for length 6000 mm and 1 support: ok. 30000 kg -extra weight Prov difference length 1000 mm: 1200 kg -the weight of the additional bracket: 1500 kg

CNC GRINDER FOR ROLLERS TSCHUDIN GRENCHEN HTG 342


CNC cylindrical grinder TSCHUDIN GRENCHEN HTG 22 E14 342 type was produced in 1987. In 2008 he underwent a modernisation, which lists: -numerical control system -servo axis -adjustable spindle drive -all electrical equipment: contactors, overload switches, buttons, etc. Technical data: -grinding length: 230 mm -the maximum diameter of grinding: fi 170 -the maximum diameter of the dial: fi 500 mm CNC grinder for shafts TSCHUDIN GRENCHEN HTG 22 E14 type 342 has used Siemens ET200S and servo drives STOEBER.

Other Turning Machines Mazak Multiplex 6200Y


OVERVIEW: Brand: Mazak Model: Multiplex 6200Y Application type: Turning Machine type: Lathe Availability: Immediately Construction year: 2001 Production hours: 6099 Location: Sweden Origin country: Japan CONTROL UNIT: Brand: Mazak Model: Mazatrol 640 T MOVEMENT: X-AXIS movement: 240 mm Y-AXIS movement: 50 mm Z-AXIS movement: 440 mm TURRET: Number of turrets: 12 Max. tool length: 160 mm TOOLS: Max tool diameter: 40 mm Max tool length: 160 mm ADDITIONAL EQUIPMENT: 1 - Bar loader

CNC Turning Machines MICROCUT BNC-30160X


OVERVIEW: Brand: MICROCUT Model: BNC-30160X Application type: Turning Machine type: Lathe Availability: Immediately Construction year: 2011 Production hours: 8241 Location: Estonia Origin country: Taiwan CONTROL UNIT: Brand: FANUC Model: Series Oi-TC MOVEMENT: X-AXIS movement: 4000 mm ADDITIONAL EQUIPMENT: 1 - Chip conveyer 2 - 8x Tool holder

Milling machining centres RIS-INGOLD Rismatic 151G-12


OVERVIEW: Brand: RIS-INGOLD Model: Rismatic 151G-12 Application type: Milling Machine type: Machining Center Availability: Immediately Construction year: 1992 Production hours: 52000 Location: Germany Origin country: Switzerland CONTROL UNIT: Brand: Rismat TURRET: Number of turrets: 12 processing stations TOOLS: Max tool diameter: 1.5 - 18 mm Max tool length: 50 mm ADDITIONAL EQUIPMENT: 1 - 12x Processing station tools

Milling machining centres RIS-INGOLD Rismatic 151LN-6


OVERVIEW: Brand: RIS Model: Rismatic 151LN-6 Application type: Milling Machine type: Revolving Index Machine Availability: Immediately Construction year: 1995 Production hours: 88521 Location: Germany Origin country: Switzerland CONTROL UNIT: Brand: Rismat TURRET: Number of turrets: 6 TOOLS: Max tool diameter: 1,5 - 18 mm Max tool length: 50 mm ADDITIONAL EQUIPMENT: 1 - 6x Processing station tools

Fresalesatrice FPT LEM M60


Technical data Running Long. 6000 mm. 1200 Trasv.mm race. Corsa 2000 Vert.mm. Working feeds 6000 mm/min. Rapid feeds 15000 mm/min. Motor power mand. 22 kW. Spindle speed 3000 rpm. Total installed power KW. 57 Data not binding to obtain/verify Date must be Standard equipment CNC HEIDENHAIN TNC 426 C. Auto Tools 40 pos. Auto dual-rotating head 2.5° x 2 .5° Anchor plans mm. diameter 1500x6000

Bed milling machine floor type FPT LEM M60


Technical data Running Long. 6000 mm. 1200 Trasv.mm race. Corsa 2000 Vert.mm. Working feeds 6000 mm/min. Rapid feeds 15000 mm/min. Motor power mand. 22 kW. Spindle speed 3000 rpm. Total installed power KW. 57 Data not binding to obtain/verify Date must be Standard equipment CNC HEIDENHAIN TNC 426 C. Auto Tools 40 pos. Auto dual-rotating head 2.5° x 2 .5° Anchor plans mm. diameter 1500x6000

Milling machining centres RIS-INGOLD Rismatic 151LN-6


OVERVIEW: Brand: RIS Model: Rismatic 151LN-6 Application type: Milling Machine type: Revolving Index Machine Availability: Immediately Construction year: 1997 Production hours: 88000 Location: Germany Origin country: Switzerland CONTROL UNIT: Brand: Rismat TURRET: Number of turrets: 6 TOOLS: Max tool diameter: 1,5 - 18 mm Max tool length: 50 mm ADDITIONAL EQUIPMENT: 1 - 6x Processing station tools

Milling machining centres RIS-INGOLD Rismatic 151G-12


OVERVIEW: Brand: RIS Model: Rismatic-151G 12 Application type: Milling Machine type: Revolving Index Machine Availability: Immediately Construction year: 1982 Production hours: 56000 Location: Germany Origin country: Switzerland TURRET: Number of turrets: 12 TOOLS: Max tool diameter: 1,5 - 15 mm Max tool length: 50 mm ADDITIONAL EQUIPMENT: 1 - 12x Processing station tools

CNC Milling Machines RIS-INGOLD Rismatic 151LN-12 (1997)


OVERVIEW: Brand: RIS-INGOLD Model: Rismatic 151LN-12 Application type: Milling Machine type: Revolving Index Machine Availability: Immediately Construction year: 1997 Production hours: 49463 Location: Germany Origin country: Switzerland CONTROL UNIT: Brand: Rismat TURRET: Number of turrets: 12 TOOLS: Max tool diameter: 1,5 - 18 mm Max tool length: 50 mm ADDITIONAL EQUIPMENT: 1 - 12x Processing station tools

Cooking cupboards Meyn Fryer BR5000/400


1 x Meyn fryer. Type - BR5000/400. 400mm wide belt. Frying length - 5000mm. Comes with hold down belt, hydraulic lifting for belts and cover, MC control, thermo-oil heated, oil tank and fire-fighting equipment. Located in Germany.

Abcd Machinery 2015


VECTRA 150 Hydropneumatic corner crimping machine suitable to every kind of aluminium profile. Maximum crimping height: 150mm Pressing force 3,5 t (35 kN) STANDARD EQUIPMENT Frame support arm set Couple of standard crimping tools 3mm Couple of standard crimping tools 5mm Couple of standard crimping tools 7mm Foot pedal Pneumatic clamping set 1x profile backing block 20mm 1x profile backing block 30mm MACHINE IS NOT USED. JUST SHOWED AT THE EXHIBITIONS. PERFECT CONDITIONS LIKE A NEW

CNC Bending Machines Göteneds FUTURA 20 3X2100


CNC bending machine Göteneds FUTURA 20 3X2100 the Swedish production, was produced in 2007. The machine has a full CNC control, which, along with digitally controlled bumper allows you to perform advanced near-perfect for example. such shapes as the gutter. Upper beam is rotating and can be fitted with two types of tools. Bending machine is equipped with a touch-screen LCD for easy programming and control of the machine. Today the company Göteneds is connected with the Du?s? company CIDAN and belongs to the Petersen Machinery Group. Characteristics: -bending length: 2100 mm The maximum thickness of bending: -steel standard: 3 mm -stainless steel: 2 mm -aluminum: 4.5 mm -motor power beam pressure: 2.2 kW -motor power beam solenoids: 2.2 kW -weight (with beam Combi): 3450 kg Standard equipment of the CNC machine Göteneds CIDAN FUTURA 20 3X2100: -rotating beam type COMBI with auto-lock, trim 300 and quick change tool system shared with a height of 125 mm -driven rear bumper type AMF-1550 -CNC control with graphics and touch screen type CS-301 -CNC controlled slot between the beam and the lower gn?c? -trim the lower beams -adjust the bending speed by inverter -Manual beam deflection compensation solenoids

Rolling mills ZGODA 550L


Rolling machines for rubber CONSENT 550L built in 1967 by the Polish Factories of technical equipment CONSENT in ?wi?toch?owice. The machine has undergone complete renovation in the year 2016 for a total of $118000 NET. The scope of the renovation include gears, bearings, lubrication and a wardrobe. Technical data of rolling mills, rubber CONSENT 550 L: -roll length: 1500 mm -diameter of the rolls: 550 mm -engine power: 100 kW

Double Miter Saws Abcd Machinery 2015


SELECTA 3 - Double head cutting off machine Home / ABCD Machinery – Machines for processing Aluminum Steel and PVC / SELECTA 3 – Double head cutting off machine SELECTA 3 High quality double head cutting off machine with a fixed sawing head on the left and automatic right head movable by numeric control with upstroke blades. Rotation and tilting of both blades for compound cuts. Brushless motor for the positioning of the movable head. Automatic pivoting inwards/outwards heads by brushless motor 22,5°90°-140°. Automatic tilting range inwards of the saw blades 90°-45°, with 2 TCT Saw blades Ø600mm. Motor power 3Kw each, lubrication by micro drop with pure oil, full protections, cutting areas with automatic raising/closing safety head, kit vertical pneumatic clamps, software of the machine completely graphical-colour display Touch screen video. 17’’Wide extension thanks to the gates RJ45-USB it allows the possibility to manage different typologies of windows with image memory for direct use. Ethernet connection to the main office or with other programs or connections with other CNC machines. Possibility of tele-assistance via . CUTTING LENGTH 6 MT. STANDARD EQUIPMENT Unlimited memorizing of cutting lists via keyboard, USB key Management expanding capacity of cut on length Management reducing capacity of cut on length Auto-feed and cut off saw (point to point) Movable roller table support with vertical stop 4x vertical pneumatic clamps Electric device for connecting motorized belt conveyor Electric device for connecting industrial vacuum Lubrication by micro drop with pure oil Full protections cutting area 2x TCT Saw Blades Ø600mm MACHINE JUST USED 3 MONTHS. PERFECT CONDITION. 5*AXIS CONTROLLED.

Hob milling machines POREBA ZFA 75


POREBA enveloping machine ZFA 75 was produced in 1967 by Mechanical Factory "MUNICH". The machine is designed for the production of gears with straight, oblique teeth and worm gears. During operation without a steady handle, it allows for machining wheels with a maximum diameter of 800 mm, and when working with a steady support, the maximum diameter of the wheel is 450 mm. Technical date: The largest cut-out module: -normally: 6 mm -with reduced accuracy: 8 mm The largest diameter of the gear being machined: -with the support fixed: 450 mm -without a steady: 800 mm The largest diameter of a toothed wheel work with helical teeth: -at a helix angle of 30 °: 500 mm -at a helix angle of 60 °: 190 mm The largest milling length for straight teeth: 275 mm Range of distances between the workpiece the axes and the milling cutter: -the smallest 30 mm -the largest 500 mm Vertical milling cutter: 310 mm The smallest distance from the table surface to the milling cutter axis: 200 mm The largest diameter of the milling cutter: 120 mm Diameter of mandrels for setting the cutters: 22, 27, 32 mm Diameter of the hole on the table: 80 mm The number of spindles of the milling spindle: 7 Range of rotation of the milling spindle: 47.5-192 Vertical cutter range for 1 turn of the workpiece: 0.5-3 mm The range of radial feeds of the milling cutter for 1 turn of the workpiece: 0.1-1 mm The range of axial feeds of the milling cutter for 1 turn of the workpiece: 0.25-1 mm Main engine power: 2.8 kW Machine dimensions: 2395 x 1210 x 1975 mm Milling weight: 3800 kg Equipment: -a set of shift wheels for the guitar -change tires/wheels for the second guitar: 7 pcs. -spindles: 5 items -conical wheels: 2 pcs -claw coupling -tests: 5 items -hook key -DTR-technical and operational documentation It is possible to buy additional equipment of the machine, i.e.: -modular cutters with various modules, from 1-8:100 pieces (additional fee, price: $9990 net, visible in the last two photos)

Bottle labelling machines SASIB labeling machine OXE hot melt labeling machine


Hot melt labeling machine for cylindrical shape bottle. Capacity 12000bph After general repair Equipment for bottles 0.75 liter and 1 liter --- We offer new and used machines. With any further questions, please do not hesitate to contact us.

Gas generators Caterpillar 3520


2055 KW Caterpillar 3520 Gas Generator in Super Insulated Enclosures Eight (8) 2055 KW Caterpillar G3520 Natural Gas Generators in Super Insulated Arctic Enclosures, 2055 KW Caterpillar 3520 natural gas engines with KATO Generators, 2671hp, 60 Hz, 13.8 KV, 1800 rpm, 60 HZ, 0.7PF. year 2009, Hours range 1300 to 2600 since new. Each generator package has its own Super Insulated Arctic Enclosure and designed to operate in severe cold conditions. Mufflers, Batteries, Battery Chargers, Oil Heaters, Prelube System, Water Pumps, Woodward Governor, panels, ABB Medium Voltage Switch Gear and Allan Bradley Motor Control Center and much more. Lots of equipment included with this package. Fast set up to generate immediate power. Excellent Condition, Great Buy on this Complete Package.

Profiling Systems INTESO S3130T


Perforating machine INTESO S3130T was produced in 2011 year in the Czech Republic. Technical data machine profiles INTESO S 3130 T: -control panel screen: SIEMENS -maximum length: 3000 mm -the maximum cross section profiles dziurowanych: 120 x 80 mm; fi 80 mm -feed automatic linear drive -optical sensor for automatic control of the correct length of workpiece -linear positioning stroke hydraulic cylinder -bezdeformacyjna perforation technology -the possibility of perforation of the profiles of various shapes -program memory perf -perforation, double-sided (in a single operation) and one-sided-automatic lubrication Tool equipment top INTESO S3130 T: -perforated profiles: 40 x 27 x 2; 30 x 30 x 2.0 -punches and dies: 18 mm; 18 x 18 upper matrix, matrix Perforating line INTESO S3130T CE certification.

Horizontal Milling Machines Kitamura Mycenter H500


OVERVIEW: Brand: Kitamura Model: Mycenter H500 Application type: Milling Machine type: Machining Center Availability: Immediately Construction year: 1989 Production hours: 23200 Location: Germany Origin country: Japan GENERAL DATA: Measurements width: 7500 mm Measurements depth: 3800 mm Measurements height: 2910 mm Machine weight: 15000 kg MAIN DRIVE: Number of spindle: 1 Spindle speed range: 35-8000 1/min CONTROL UNIT: Brand: FANUC Model: 15M MOVEMENT: X-AXIS movement: 710 mm Y-AXIS movement: 610 mm Z-AXIS movement: 610 mm MEDIA: Chip conveyer: yes ADDITIONAL EQUIPMENT: 1 - Tools 1 - Tool holder

CNC Laser Cutting Machines Trumpf TruMatic 3000 fiber (K04)


OVERVIEW: Brand: Trumpf Model: TruMatic 3000 fiber (K04) Application type: Laser Cutting Machine type: Laser Punch Combination Machine Availability: September Construction year: 2011 Production hours: 34000 Laser hours: 33000 Location: Spain MAIN DRIVE: Laser power: 3000 kW Punching force: 165 kN CONTROL UNIT: Brand: Siemens MOVEMENT: X-AXIS: Movement: 2500 mm Y-AXIS: Movement: 1250 mm WORKPIECE: Workpiece weight: 120 kg MAX MATERIAL THICKNESS: Steel: 4 mm ADDITIONAL EQUIPMENT: 1 - MultiTool function 2 - MultiBend function 3 - Thread shaped function 4 - Fast marking / grooving function 5 - Function roller technology and deburring 6 - Additional clamping claw 7 - Repositioning cylinder with moving parts in height 8 - Small parts sensor for ramp evacuation 9 - Mounting on mattress 10 - Chip conveyor with folding tank 11 - Deformed sheet metal detection 12 - Teleservice via and modem 13 - SheetMaster (2500 x 1250) 14 - Off / Load parallel to the main time 15 - Sheet separation system incl. Positioning help for medium format (2500 x 1250) 16 - Suction cup frame 17 - Disp. Load control 18 - GripMaster (2500 x 1250) 19 - SortMaster Pallet (6 transversal Pallets x = 1200 mm, y = 800 mm) 20 - Double trolley load incl. connection with warehouse 21 - 18 RTC cassettes incl. Matrix plate 22 - QuickSet 23 - Conveyor belt parts 24 - TruTops Punch License 25 - Includes € 40,000 in tooling

Laser Cutting Machines Trumpf TruMatic 3000 fiber (K04)


OVERVIEW: Brand: Trumpf Model: TruMatic 3000 fiber (K04) Application type: Laser Cutting Machine type: Laser Punch Combination Machine Availability: September Construction year: 2011 Production hours: 34000 Laser hours: 33000 Location: Spain MAIN DRIVE: Laser power: 3000 kW Punching force: 165 kN CONTROL UNIT: Brand: Siemens MOVEMENT: X-AXIS: Movement: 2500 mm Y-AXIS: Movement: 1250 mm WORKPIECE: Workpiece weight: 120 kg MAX MATERIAL THICKNESS: Steel: 4 mm ADDITIONAL EQUIPMENT: 1 - MultiTool function 2 - MultiBend function 3 - Thread shaped function 4 - Fast marking / grooving function 5 - Function roller technology and deburring 6 - Additional clamping claw 7 - Repositioning cylinder with moving parts in height 8 - Small parts sensor for ramp evacuation 9 - Mounting on mattress 10 - Chip conveyor with folding tank 11 - Deformed sheet metal detection 12 - Teleservice via and modem 13 - SheetMaster (2500 x 1250) 14 - Off / Load parallel to the main time 15 - Sheet separation system incl. Positioning help for medium format (2500 x 1250) 16 - Suction cup frame 17 - Disp. Load control 18 - GripMaster (2500 x 1250) 19 - SortMaster Pallet (6 transversal Pallets x = 1200 mm, y = 800 mm) 20 - Double trolley load incl. connection with warehouse 21 - 18 RTC cassettes incl. Matrix plate 22 - QuickSet 23 - Conveyor belt parts 24 - TruTops Punch License 25 - Includes € 40,000 in tooling

Cylinder head MaK 8M35 & 6M35


MaK M35 COMPLETE CYLINDER HEADS FOR SALE. CYLINDER HEADS ARE SUITABLE FOR MaK 6M35 & MaK 8M35 ENGINES. CYLINDER HEADS FULL WITH EQUIPMENTS. READY FOR SHIPMENT.

Atrezzature edilizia


Construction equipment and tools for Office including: -Kawasaki OHV Generator -circular saw -concrete mixer glass 230 V brand Officine Bragagnolo – year 2002 -230 V hot water spray gun -Tagliamattoni water tour -Miter saw Stihl -Welding machine -plaster sprayer brand Maltech – year 2002 -milling machine/smoother for plaster -pump for plaster -Alzalastre for plasterboard -printer/copier, Monitor keyboard white -PC complete with monitor, keyboard and mouse, PC tower ... ETC, ETC. -for sale exclusively on next June, 19 hours 10-00 IN via Padana Superiore n° 65, Cazzago San Martino (BS) -For more information contact us at 030 – 7751645 between 9-13, 14-18

CNC Punching Machines AMADA PEGA 357


OVERVIEW: Brand: AMADA Model: PEGA 357 Application type: Punching Machine type: Turret Punching Machine Availability: Immediately Construction year: 1993 Production hours: 48600 Location: India Origin country: Japan GENERAL DATA: Measurements width: 3770 mm Measurements depth: 4931 mm Measurements height: 2315 mm Machine weight: 11600 kg MAIN DRIVE: Punching force: 300 kN Maximum sheet thickness: 4 mm CONTROL UNIT: Brand: AMADAN Model: 04PC Interface: RS232 MOVEMENT: X-AXIS: Movement: 1830 mm Y-AXIS: Movement: 1270 mm MAX MATERIAL THICKNESS: Steel: 4 mm Stainless steel: 2 mm Aluminium: 5 mm TOOLS: No. of stations: 45 Max. tool diameter: 114,3 mm No. of index: 4 MEDIA: Main electronic connection: 400 V / 50 Hz Power consumption: 18 kVA Air pressure: 6 bar Lubrication tank: 1 L Oil tank: 80 L ADDITIONAL EQUIPMENT: 1 - 30x tools 2 - Stabilizer

CNC Punching Machines Trumpf Trumatic 2000 R


OVERVIEW: Brand: Trumpf Model: Trumatic 2000 R Application type: Punching Machine type: Turret Punching Machine Availability: Immediately Construction year: 2001 Production hours: 48600 Location: India Origin country: Germany GENERAL DATA: Measurements width: 2800 mm Measurements depth: 5500 mm Measurements height: 2200 mm Machine weight: 9200 kg MAIN DRIVE: Punching force: 180 kN Maximum sheet thickness: 4 mm CONTROL UNIT: Brand: Bosch Interface: RS232 MOVEMENT: X-AXIS: Movement: 1250 mm Y-AXIS: Movement: 1250 mm MAX MATERIAL THICKNESS: Steel: 4 mm Stainless steel: 2 mm Aluminium: 5 mm TOOLS: No. of stations: 10 Max. tool diameter: 76 mm No. of index: 10 MEDIA: Main electronic connection: 400V/50 Hz Power consumption: 17 kVA Air pressure: 7 bar ADDITIONAL EQUIPMENT: 1 - 10x tools

Thermo forming machines GN 2220A


Make GN Model 2220A Delivery Date Immediately Maximum Forming Area 550 x 500 mm (22" x 20") Max Depth of Draw 100 mm Sheet Width 587 mm Material Thickness Range 0.15 - 1 mm Max Cycles 30 Materials PP - PET - OPS Power 380 V All details are subject to change and/or errors. All equipment is subject to availability and/or prior sale.

Can Filling Line SIG Simonazzi 12000 cph SIG Simonazzi only two years of operation


Can Filling Line SIG Simonazzi 12000 cph This can filling line was installed in 2003. The line has only operated two years and is in very good condition. It is currently installed and powered and can be dry tested. Main equipment of this line: Depalletizer: Simonazzi Sweep-Off “S” Can rinser: Included Filler: Simonazzi Newcanfill NC30, 30 filling valves Seamer: Comaco AGM4RN, 4 seaming heads Level inspector: Included Mixer: SIG Simonazzi, 6000 hl/h Secondary packer: SMI LSK 15T, 15 tact/min, tray + shrink wrap Conveyors: Included

Filling Line KHS 50 000 bph and returnable KHS GmbH Glass bottles 0.33 and 0.5 ltr


Filling Line KHS 50 000 bph new and returnable bottles glass bottles This line is made by KHS in year 2005 and it was in operation till July 2013. It still installed, fully operational and is suitable for filling 0.3 – 0.5 liter glass bottles with beer and soft drinks, capacity upto 50 000 bph in 0.5 liter bottles. This line has also a bottle washer but not crate handling Main Characteristics • Capacity 50 000 bph at 0.5 liter bottles • Made by KHS in year 2005, in operation till 2013, still installed • For both new and returnable glass bottles, operated for 0.5 liter bottles only • Secondary packaging Kisters shrink tray packer and KHS palletizer • Operation controls made with Siemens Simatic S7 PLC system • Complete line in fair condition and immediately available for relocation List of main equipment 1. Bottle Depalletizer KHS Innopal 2. Bottle Washing Machine KHS Innoclean – compact design a. Capacity 55000 bph b. Double ended c. Two washing sections and a rinsing section 3. Empty Bottle Inspector OMNIVISION II by Filtec year 2008 4. Filling Block KHS Innofil DMG VVF/SVF, year 2005 a. Rinser with 112 heads b. Filler with 120 filling heads c. 18 capping stations for crown cork d. Hot water injection for beer foam creating before closing e. Automatic outside washing system f. Comes with 2 sets of spare parts for each (two) bottle format g. Crown cork feeding system by MSN Magnettechnik (with magnet conveyor) 5. Level Inspection System KHS Metec Promecon 4000 with two measuring bridges (x-ray) 6. Flash Pasteurizer KHS Innopro KZE a. with 11 m3 buffer tank, diameter 2.0 m, insulated 7. Air Dryer ACI one section approx. 2 meters 8. Labeling Machine KHS Innoket KL 2080, year 2005 a. Type KL 2080-40/120-48 PM P1 b. With two labeling stations for 3 labels – front, back, neck c. How glue system d. Inbult Date printer Lasetec (laser) e. Data printer Videojet inkjet printer Excel 170 i 9. Label Inspector KHS Metec Promecon 3000 with measuring bridge (x-ray) 10. Kisters TSP 050 B Secondary Packaging Machine, year 2005 a. For tray, film and colored film b. Packaging configurations 5 x 4 (6 x 4) 11. Transport system with two lines after secondary packaging for correct palletizer feeding with package turning unit 12. Palletizer KHS Innopal PN 1 N (H) 2 13. Pallet stretch wrapping machine Robopak 14. Pallet conveyor to warehouse

Beer Brewery 250 hl/Brew, 400 000-700 000 hl/year Steinecker Complete brewery


Beer Brewery 250 hl / brew 400 000 – 700 000 hl / year The brewery was originally built by Anton Steinecker in year 1984. Operation was stopped in January 2018 and it is almost untouched with all production equipment and water treatment (Only some tanks, EBI of the RGB line and filtration line were relocated to another brewery) This brewery is designed to produce high quality lager beers and pack them either in returnable glass bottles or 30 and 50-liter stainless steel KEGs. Annual technical beer production capacity is around 700 000 hl (with diluting high gravity beer) to actual 428 000 hl with 2 shift x 5 days packaging operation. Beer is packed in 0.5-liter returnable glass bottles and 30-50 liter stainless steel KEGs This brewery has Künzel made malt transport system from year 1984 with steel malt silos (3x 360 m3 malt, 2x42 m3 maiz). Malt handling capacity is 20 tons/hour and it has also 5 t/h malt dosing line with a hammer mill. Malt department is controlled with Siemens S7 200 PLC which has InTouch system. Malt house is complete and no missing equipment. Malt mill is wet type 2-roll Künzel. The complete line equipment is made by Steinecker in year 1984 and having substantial upgrade in 1994 and 2002 and it still powered and in good condition. This brew line can brew 8.5 brews / day, brew size 250 hl / brew, grist throw 5500 kg / brew and worth gravity up to 17 ° Plato. This brewery produced tree different type of high quality lager beers only. Last brew was made in December 2017 so everything is in good working order. This equipment forms a complete brewery (brew line) from malt mill to wort cooler with water island, CIP unit, buffer tank and Steinecker made Botec control system with Siemens Simatic S7-400 PLC up to the wort boiling. Yeast department is complete with sterilizer tank, two propagators and four yeast storage tanks. System is controlled with Siemens S7 PLC InTouch system. Filtration department has two good condition Alfa-Laval DAW units, 2 x 400 hl buffer tanks for DAW water and 4 x 400 hl BBT’s left. For fermentation this brewery has total cross capacity of 55600 hl tank volume. All fermenting tanks are outdoor model vertical tanks. Direct ammonia cooled CCTs Inox 10 x 2400 hl, glycol cooled CCTs Inox 14 x 1100 hl and direct ammonia cooled, coated (Fe) CCTs 4 x 2400 hl glycol cooled Packaging of beer is made with Krones year 1998 delivered returnable glass bottle line, capacity 45 000 – 55000 bph. The line has complete crate handing system and both flash and tunnel pasteurizer. Complete line (excluded EBI, which will go another brewery) is well maintained, powered and in full operational condition. The brewery has also KHS Till KEG line with 3 filling lines having capacity of 180 KEG / hour in 30 liter in stainless steel KEGs
Find used machinery dealers in your country