engel injection used for sale

Engel Victory Victory 1350/260 Tech Ecodrive with the Engel Viper 20 robot / hybrid machine Year of Make: 2011 Injection unit: Screw diameter: 55 mm Injection weight: approx. 590 g Spray pressure: 2183 bar Dosing volume: 618 ccm Clamping unit : Clamping force: 260 t Spar spacing: 0x0 mm Size of the mounting plates: 1100x1000 mm Ejector: hydraulic Clamping unit: hydraulic Control: CC 200 - Touchscreen Additional equipment: Production line with the Engel Viper 20 robot Machine in very good technical condition Tie-bar-less, hybrid machine: energy-saving and very quiet Air valve x 8 on the side of the fixed clamping plate Hydraulic core pull x 2 on the side of the fixed clamping plate Hydraulic core pull x 2 on the side of the movable clamping plate Control with hot runners x 18 Injection unit is wear-resistant and resistant to corrosion Main motor of the ma ...

Key data: 2750 kN

Engel ES 1350/275 HL with the Engel ERC 53/1-E robot / machine in very good technical condition Year of Make: 2001 Injection unit: Screw diameter: 60 mm Injection weight: 547 g Spray pressure: 1834 bar Dosing volume: 618 ccm Clamping unit: Clamping force: 275 t Spar spacing: 0x0 mm Size of the clamping plates: 1050x900 mm Ejector: hydraulic Clamping unit: hydraulic Control: CC 100 Additional equipment: Machine in very good technical condition Operating hours: 35,819 h in automatic mode Tie-bar-less machine Hydraulic core pull x 3 Control with hot runners x 16 Hardened injection unit - Bimetal Machine has been regularly serviced by the authorized service Engel Dimensions: Weight: 20000 kg Length/Width/Height: 7.10x2.15x2.30 m All offered machines are started by our service technicians before they are sold. It is possible to receive a video of the tech ...

Engel e-Motion 740/280 T WP with the TecnoMatic robot / Electric machine Year of Make: 2016 Injection unit: Screw diameter: 50 mm Injection weight: approx. 360 g Spray pressure: 1900 bar Dosing volume: 393 ccm Clamping unit : Clamping force: 280 t Tiebar spacing: 780x780 mm Size of the clamping plates: 1100x1100 mm Ejector: electric Clamping unit: toggle lever Control: CC 300 - Touchscreen Additional equipment: Production line with the TecnoMatic robot Machine in very good technical condition Electric machine: energy-saving and very quiet Operating hours: approx. in automatic mode Euromap 67 Robot interface Air Valve x 5 Hydraulic core pull x 4 Control with hot runners x 64 Injection unit is wear-resistant and resistant to corrosion Main motor of the machine - Servo motor driven by inverter - Energy saving Central lubrication Parallel movements Aut ...

Key data: 3000 kN

Engel Victory 1050/300 Tech Ecodrive with the Wittmann W832 PRO robot / Hybrid machine / Operating hours: approx. 25,000 h in automatic mode Year of Make: 2017 Injection unit: Screw diameter: 60 mm Injection weight: approx. 540 g Spray pressure: 1725 bar Dosing volume: 608 ccm Clamping unit: Clamping force: 300 t Spar spacing: 0x0 mm Size of the mounting plates: 1100x1000 mm Ejector: hydraulic Clamping unit: hydraulic Control: CC 300 - touch screen Additional equipment: Machine in very good technical condition Tie-bar-less, hybrid machine: energy-saving and very quiet Operating hours: approx. 25,000 in automatic mode Euromap 67 Robot interface Air Valve x 6 Hydraulic core pull x 1 Control with hot runners x 18 Injection unit is wear-resistant and resistant to corrosion Main motor of the machine - Servo motor driven by inverter - Energy saving Proportional ...

Hydraulic injection moulding machine manufactured in 2007. This Engel Victory VC1800/300 P features a clamping force of 3,000 kN and an opening stroke of 900 mm. It includes a robust control system with a 15 TFT touchscreen and a maximum injection pressure of 1,735 bar. If you are looking to get high-quality injection moulding capabilities, consider the Engel Victory VC1800/300 P machine we have for sale. Contact us for further details. Identical Engel Victory VC 1800/300P (2008 model) also for sale — same configurations.

Clamping force: 800kN, Opening stroke: 450mm, min. tool installation height: 250mm, Plate dimensions X/Y: 660mm/560mm, Tie bar spacing: 403mm/345mm, Ejector stroke: 100mm, Injection volume: 154cm³, Injection pressure: 1600bar, Machine dimensions X/Y/Z: approx. 6000mm/1850mm/2000mm, Weight: approx. 4900kg. An on-site inspection is possible.

Manufacturer: Engel Model: 330/75 HL Year of Manufacture: 2002 Type of Machine : Injection Moulding Machine Machine Weight: 5,850 kg Find more here - / Contact us at -

Key data: 2500 kN, 700 g/PS, 60 mm

Year of construction 2002 Screw diameter 60mm Shot volume 735cm³ Clamping force 250t Min. mould installation height: 250 mm 2 Core pulls 1 air valve handling/robot ENGEL ECR 52/1-EA,RC100 6 integrated hot runner zones Operating hours only 14,109 h

Manufacturer: Engel Model: ES 200/90 HL Year of Manufacture: 1999 Type of Machine : Injection Moulding Machine Machine Weight: 5,900 kg Find more here - / Contact us at -

Hydraulic injection moulding machine manufactured in 1999. This Engel ES 16050/1100 DUO features a clamping force of 1100 T and a screw diameter of 150 mm. It has an opening stroke of 1800 mm and a total weight of 77,000 kg. If you are looking to get high-quality injection moulding capabilities, consider the Engel ES 16050/1100 DUO machine we have for sale. Contact us for further details.

Injection moulding machine Engel DUO 4550/800 BJ 2004

Key data: 2600 kN, 950 g/PS, 70 mm

Year of manufacture 2005 Clamping force: 260 tons. Screw diameter: 70 mm Operating hours: 125,000 h incl. removal robot: Engel ERC 55/O-E Good condition, regular maintenance, energized

Key data: 1200 kN, 186 g/PS, 35 mm

Now fully refurbished by our team at STV Machinery in Wellingborough, Northamptonshire is this high precision Engel Victory VC 500/120 injection moulding machine. This tie bar-less machine is fitted with the Engel Microprocessor controller and 35mm diameter screw, which gives a shot weight of 186 (PS)g. Refurbished machines from STV Machinery undergo a comprehensive test procedure during which every function of the machine is tested and if necessary repaired. A production run of at least 5000 fault free cycles prior to sign off ensures trouble free operation once delivered. Machines are ultra clean and cosmetically as good as we can get them. We guarantee our refurbs are delivered fault free and leak free. Prices shown are ex-works, but we can quickly provide DAP (Delivered at Place) Incoterm pricing on request. We can take out the hassle and additional costs of purchasing machiner ...

Year of construction : 2011 Control CC200 Locking force 400 tons incl. various accessories ( Piovan cooling unit, Tooltemp cooling unit, vacuum pump ) Machine comes directly from production

B&A REF:  9307 TON: 1100 SCREW DIAMETER:  105MM SHOT WEIGHT: 3075 STROKE VOLUME:  3380CM3 INJECTION PRESSURE: 1600AR PLATEN SIZES:  1850 X 1810MM DBTB: 1400 X 1150MM MIN MOULD HEIGHT:  600MM MAX MOULD HEIGHT: 1200MM MOULD OPENING STROKE:  1800MM MAX DAYLIGHT:  2400MM EJECTOR STROKE:  300MM CONTROLS: CC 200 TOUCH CORE PULLING: 4 AIR VALVES: 2 MOTOR: 75 HEATING CAPACITY: 72KW ROBOT INTERFACE: EUROMAP 67 SCREW DRIVE:   HYDRAULIC

Hydraulic injection moulding machine manufactured in 2003. This Engel DUO 5550/800 features a clamping force of approximately 800 tons and a screw diameter of about 90 mm. It has a shot volume of around 2700 cm³ and a maximum injection pressure of approximately 1900 bar. If you are looking to get high-quality injection moulding capabilities, consider the Engel DUO 5550/800 machine we have for sale. Contact us for further details.

Hydraulic injection moulding machine manufactured in 2002. This Engel VICTORY 500/120 features a robust design with a weight of 7400 kg. It includes an integrated keypad and screen for user-friendly control. If you are looking to get high-quality injection moulding capabilities, consider the Engel VICTORY 500/120 machine we have for sale. Contact us for further details.

Manufacturer: Engel Model: Victory 330H/80L/110 Year of Manufacture: 2008 Type of Machine : Injection Molding Machine.Combi machine for 2-component injection molding (main cylinder is Ø 18mm thermoplastic and L-unit is a Ø 12mm LSR cylinder) Operating hours: 35995h Find more here - / Contact us at -

Hydraulic injection moulding machine manufactured in 2019. This Engel Victory 120 BMG features a clamping force of 120 t and a tie-bar-less design, ensuring efficient operation. It includes a high-speed injection unit and an advanced CC300 control system with a 21.5 full HD touchscreen. If you are looking to get high-quality injection moulding capabilities, consider the Engel Victory 120 BMG machine we have for sale. Contact us for further details regarding this machine.

Key data: 11000 kN, 150 mm

Clamping force: 1100 T Year: 1999 Working hours: 86,200 h Screw diameter: 150 mm Column diameter: 230 mm Displacement: 10,955 cm³ Injection pressure: 1330 bar Ejection force: 215 N Opening stroke: 1800 mm Platen dimensions (H x W): 1150 x 1400 mm Heating capacity: 113 kW (153.64 hp) Total weight: 77,000 kg Clamping Unit (L x L x H) : 5 x 3,5 x 2,6 m Weight : 53T Injection unit(L x L x H) : 5,5 x 2,7 x 2 m Weight : 24T

Clamping force: 1800kN, screw stroke: 200mm, speed: 300rpm, L/D: 20, nozzle stroke: 400mm, nozzle contact force: 50kN, hopper volume: 80l, tie-bar spacing: 520mm/520mm, platen dimensions X/Y: 760mm/760mm, mold installation height range: 250mm-600mm. Machine dimensions X/Y/Z: 6200mm/1700mm/2750mm, weight: approx. 12000kg, operating hours (Nov. 2025): 27271h. Including handling and protective enclosure. Documentation available. An on-site inspection is possible.

Key data: 11000 kN

ENGEL DUO 1100 T injection moulding machine – ES16050/11000 – ENGEL robot included For sale: ENGEL large-tonnage injection moulding machine model ES16050/11000 DUO, designed for demanding industrial production and large technical parts. Machine in very good working order, fully operational. General information • Manufacturer: ENGEL • Model: ES16050/11000 DUO • Year: 1999 • Type: Injection Molding Machine • Condition: Very good condition (used) • Operation: Fully functional • Hours of service: 86,200 hours Technical characteristics • Clamping force: 11,000 kN • Screw diameter: 150 mm • Injected volume: 10,955 cm³ • Injection pressure: 1,330 bar • Column diameter: 230 mm • Opening stroke: 1,800 mm • Ejection force: 215 kN • Ejector stroke: 300 mm Dimensions • Plate dimensions: o Width: 1,400 mm o Height: 1,150 mm • Total weight ...

Material: stainless steel Engine: 7,5 kW Convey length: 2850 mm Convey width: 500 mm Very good condition. You can also get the entire system with all components.

Material: stainless steel (1.4541) Engine: 7.5 kW Content: 500 ltr Weight: 1000 kg Length x Width x Height: 1200 mm x 1200 mm x 3100 mm With jacket 22 rpm Very good condition. We plan and build for the complete system from used and new machinery, exactly for your needs. Are you looking for something else? Write us below!

Chassis, electric motor, DC motor, traction motor, drive motor, steering motor -Manufacturer: Engel, steering motor from Jungheinrich ESE 320 G 20-240.54 electric stacker -Type: GNM 5460-G18.5-MIR1 Ser. H -Motor: 24V/240W -Dimensions: 135/130/H365 mm -Weight: 8 kg

Chassis, electric motor, DC motor, traction motor, drive motor, steering motor -Manufacturer: Engel, steering motor from Jungheinrich electric forklift -Type: GNM5460E-G18 -Motor: 24V/240W -Dimensions: 150/130/H365 mm -Weight: 7 kg

J. Engelsmann mobile lifter for containers etc., max. weight 300kg, fork length approx 700mm, fork diameter 50mm, fork gap approx. 600mm, max. lift approx. 1700mm from the floor.

used, good condition radial drilling machine / Kesselradiale of Collet and Engelhardt, type BUV 1000 Head is rotating and swiveling. The machine is fully moveable. Technical data Spindle retainer 4 MK Drilling capacity approx. 40 mm RADIUS approx. 900 mm Dimensions L x W H approx. 2100 x 1000 x 2500 mm Weight approx. 2500 kg

PET Preform injection moulding machine Clamping force 320t Spray weight 6935gr. Snail 130mm Preform extraction system SERVO IV, TPS robot TRT-M4-72-E, 72-speed, 4-stage, incl. withdrawal kit, conveyor belt LT/h 1825, dosing Motan Minicolor PET

Machines are still in use. Will be available soon. Pictures and technical data on request.

Hydro motor for screw cylinders Injection unit size ES3550 Hägglunds Drives type CA50 20 2 0 0 N 004

Screw cylinder complete with screw, cylinder head and closure nozzle for ENGEL injection unit size ES3550

clamping force: 1.750 kN injection volume: 318 cm³ screw diameter: 45 mm platen size: 700 x 700 mm daylight between platens - max.: 460 mm Condition: used, Specification: Horizontal injection moulding machine, Injection unit: - Screw diameter: 45 mm - Screw length L/D: 20 - Spray volume: 318 cm³ - Shot weight max.: 287 g - Special spraying pressure: 2,100 bar Clamping unit: - Max. clamping force: 1,750 kN - clamping plates: 700 x 700 mm - Opening path max.: 460 mm - mould installation height: 150 mm - Operating hours: 89217 h - 1x core puller - Handling / Robots: ENGEL The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

clamping force: 450 kN injection volume: 135 cm³ screw diameter: 35 mm platen size: 600 x 400 mm Condition: used, Specification: C-frame injection moulding machine for TPE - used clamping unit: - clamping force: 450 kN - heating platen size: 600 x 400 mm - sliding table: yes - Clamping direction: from below - Ejector / lifter: Up + Lo Injection unit: - Injection volume max.: 135 cm³ - Screw diameter: 35 mm - Connected load: 3x 400 V, 50 Hz - Weight approx.: 5,500 kg The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Radial drilling machine used for drilling and milling Manufacturer: COLLET & ENGELHARD GmbH Type: BUV 1600 Year of construction: 1976 horizontally and vertically swivelling head Drilling capacity: 50 mm Travel arm: approx. 800 mm max column travel: 1000 mm Speed: 14 to 710 rpm Spindle stroke approx. 300 mm 380 V Dimensions: approx. 2600 x 1300 x 3000 mm Changes and errors in the technical data, information and prices as well as prior sale reserved.

Förderbaänder 16 A 380 V Slow runners Length 90 cm Width 15 cm Height 15 cm

Conrad Engelke 3m diam. x 2.2m long Autoclave Steam operation Design pressure 7bar Design temp 169deg C Volume 19m3 Length of rotating steel tube 1320mm With new Control Panel Complete with full documentation

Exhaust air purification system Manufacturer: Langbein Engelbracht Type: DV2-92 Plant number: No.20245 Year of construction:2004 Exhaust air volume: min. 1000 - max. 3500 Nm³/h Pressure drop: 60 mbar Burner: Gas Burner Inlet temperature: 20°C Power: Heat exchanger 600 kW Heating capacity: 230 kW Reaction temperature: 820 - 950°C Included: documentation, chimney, PC for control with software, EURO-FID, piping (if desired), control cabinet Location: Neu-Ulm

- RC200 integrated - drive package multidynamic - 1 x switchable vacuum/pneumatic circuit - 1 x compressed air circuit - electric supply network: 3x380V+N+PE/60HZ - compact electric cabinet mounted on Z-axis - incl. 4DI /4DO free programmable - han

- RC300 integrated - drive package multidynamic - 2 x switchable vacuum/pneumatic circuit - 1 x compressed air circuit - electric supply network: 3x380V+N+PE/60HZ - compact electric cabinet mounted on Z-axis - incl. 4DI /4DO free programmable - han

clamping force: 4.000 kN injection volume: 2.700 cm³ screw diameter: -- mm platen size: -- mm Condition: used, Specification: Rubber Injection Molding Machine - second-hand clamping unit: - Clamping force: 4000 kN - ejection device: 2-layer - Brush system: 2-layer Injection unit: - Injection volume max.: 2,700 cm³ Two identical systems are available. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Engel ES200/45VTHL-PRO-ELAST (2002) Clamping force: 45 t Type: Vertical Drive: Hydraulic

Manufacturer: Engel Verstellmotor Geräteträger, Year: 1994, Type: Serie A/GNM 4150-B5.2, Volt/Hz: 42/3,1 mpere, pm: 3000, Year :1994

spindle diameter: 130 mm x-travel: 3000 mm y-travel: 2000 mm total power requirement: 4,5 kW weight of the machine ca.: 30 t Spindle Ø 130 mm Spindle taper SK 50 Working range: X = column, longitudinal 3,000 mm Y = headstock, vertical 2,000 mm Z = spindle stroke 1,000 mm Lower table 3,300 x 2.400 mm Max. weight on table 10 tons/m² Min./ max position of work spindle above table 770 / 2,770 mm Feeds 0.9 - 2,000 mm/min Quick feed for headstock and column 5,000 mm/min Quill feed 0.5 - 1,200 mm/min Speed range, partially infinitely variable 4.5 - 1,250 rpm Weight, approx. 30,000 kg Accessories / Special Features HEIDENHAIN Digital Display for 3 axes. Hardened guideways. Ball screw spindles. Infinitely variable spindle speeds and feeds. Feeds can be individually driven with motor. Moving operating platform. Hanging control panel. Manual operati ...

inner taper of milling spindel: SK 40 collet diameter: - turning speed range: Maschinenabhängig U/min drive motor: Antrieb durch Maschine kW distance spindle - column: ca. 800 mm total power requirement: - kW weight of the machine ca.: 0,4 t dimensions of the machine ca.: 1,2 x 0,8 x 0,8 m No. 4896: Vertical milling head SK 40 Make COLLET + ENGELHARD, mod. BN 100 ( BFfb 85 / 110 ) Support bearing 2 set of bevel gears The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

JEL Fix double screen machine (2 pcs) installed in solid table, without screen inserts

Two rolling mills for thermosetting plastics are available. 1) 2x identical rolling mills Berstorff (Krauss Maffei), year of construction: 1959, drive wheel renewal: 2000, working width: 1200mm, roll diameter: 400mm. 2) Big bag frame with electric chain hoist. 3) Suction blower. 4) Engelsmann screening plant. 5) Glass fiber dosing devices. 6) Conveying units, control system and screws. 7) Krauss Maffei test laboratory roller for color determination. Without shredding units. Documentation available. On-site inspection is possible.

Two compressed air tanks are available. 1) Karl Kremsmüller u. Co., year of construction: 1980, operating pressure: 7bar, test pressure: 9.1bar, operating temperature: 20°C, medium: compressed air, capacity: 5300l. 2) Engelbert Dax, year of manufacture: 1973, capacity: 15000l, operating pressure: 4ATÜ, test pressure: 5.2ATÜ. On-site inspection is possible.

Clamping Force: 60 tons (600 kN) Injection Unit Orientation: Vertical Rotary Table: Included Screw Diameter: Approximately 35 mm Shot Size: Around 4.4 oz (125 g) Injection Pressure: Up to 210 bar Injection Speed: Approximately 139 mm/s Mould Opening Stroke: 305 mm Ejector Stroke: 106 mm

Weight 52 kg Picker from IMM Engel Victory 80/50 Spex