used ENGEL es

used Engel machine type Victory ES3550/600HL with additional peripheral devices. Number of hours: 1979 Injection unit: Screw diameter: 70mm Injection volume: approx. 1500cc Closing unit: Closing force: 600T Table dimensions: attachment, enlarged version Ejector: hydraulic Closing system: hydraulic, tie-barless Control: CC100 – Polish language Additional equipment: Hydraulic core string on the fixed side – x3 Hydraulic core string on the moving side – x3 Pneumatic valves – x2 Hydraulic cascade valves – x6 Automatic drives of side covers on both sides of the form, The machine is serviced by an authorized Engel service center, In 2020, a set of hydraulic pumps was replaced with new ones, Dimensions: Weight – 38T short circuit unit, 10T injection unit, Dimensions (L x W x H): 9410 x 2480 x 2580 Power supply: Pump/Motor: 60kW Heaters: ...

Injection molding machine ENGEL ES570 for clamping forcé 125 Tons from 1999 in working conditions. Further information please contact. Good price for liquidation. Directly from the factory where they were working.

Make: Engel Type: Vertical Rubber Injection Model: ES 280V/40VT-ELAST Serial number: 41938, Year of manufacture: 2000 Clamping force 400kN Injection volume 280cm3 Platen size: 860x400mm In good condition.

Screw cylinder complete with screw, cylinder head and closure nozzle for ENGEL injection unit size ES3550

Engel ES2000H750L Injection Moulding Machine 90 Kw Working hour: 149658

Chassis, electric motor, DC motor, traction motor, drive motor, steering motor -Manufacturer: Engel, steering motor from Jungheinrich ESE 320 G 20-240.54 electric stacker -Type: GNM 5460-G18.5-MIR1 Ser. H -Motor: 24V/240W -Dimensions: 135/130/H365 mm -Weight: 8 kg

Engel ES7050/1000 DUO Closing unit Clamping force [kN] 10000 Dimensions of mounting plates (hxv) [mm] 2000 x 1830 Clearance between columns (hxv) [mm] 1400 x 1150 min./ max. mold height [mm] 400 - 1200 Maximum opening width [mm] 1800 injection unit Screw diameter [mm] 120 Injection volume [cm3] 5430 Injection weight [g] 4936 Injection pressure [bar] 1650 Dimensions and weight Net weight with control cabinet [t] 65

Hydro motor for screw cylinders Injection unit size ES3550 Hägglunds Drives type CA50 20 2 0 0 N 004

Machine dimensions Length 2800mm Width 1500mm Height 3500mm Weight 4500 kg Closing system Closing type vertical; column-less Clamping force 80t Injection system Screw diameter 18 mm Max injection pressure 11.50 Pa Max injection volume 50g Additional equipment cnc control Vertical injection Pressure measurement in the mold

Screw diameter; 30 mm Injectable volume: 99 cm3 Injection pressure: 1450 bar Trays dimensions: 920 x 400 mm Minimum mould thickness: 190 mm max: 520 mm Opening stroke: 330 mm Cores: 3

ENGEL INSERT 60H/30 SHUTTLE injection moulding machine was manufactured in 2016 in Austria. A specialised machine with a small footprint, is used for, among others, the overmoulding of inserts and the joining of various materials such as glass, metal and electronics. Thanks to the electric control of the injection unit and the ‘pressure locking’ system for the injection cylinders, the injection moulding machine guarantees high repeatability and excellent quality of inserts. The ENGEL INSERT 30 injection moulding machine allows you to set the speed and clamping force to prevent damage to the mould. Once both mould halves are closed and a high closing force is generated, the injection unit pushes the nozzle against the injection sleeve of the mould and produces an adjustable clamping force. At the end of the cycle, a very powerful screw with a diameter of 18 mm injects the melt unde ...

ENGEL ES 330/80 HL injection moulding machine was built in Austria in 1995. A highly reliable and efficient machine equipped with high-end components, is used in the processing of plastics by injection moulding. The combination of high mould clamping force and a powerful screw with a diameter of 35 mm guarantees the high quality of the manufactured products. The injection moulding machine works with injection moulds with a height from 170 to 370 mm, which placed on 710 x 660 mm platens are closed with a force of 80 tonnes. The machine is equipped with an ENGEL CC100 CNC controller for setting injection moulding process parameters, an ENGEL ERC 23/1-CH servo-driven multi-axis robot and a pneumatic and hydraulic core. The tie-bar-less injection moulding machine weighs 5300 kg. Technical specifications for the ENGEL ES 330/80 HL injection moulding machine - maximum clamping force: 80 ...

ENGEL ES 200/75 HL-V injection moulding machine was built in Austria in 2000. The highly reliable and robust machine is designed for processing plastics by injection moulding. The high-end components installed on the ENGEL ES 200/75 HL V injection moulding machine guarantee a significant increase in work efficiency and productivity. The machine operating with a force of 75 tonnes works with injection moulds of a minimum height of 200 mm, which are placed on 660 x 560 mm platens. All process parameters are programmed and controlled on the convenient and intuitive ENGEL CNC control, located on the body of the plastics processing machine. The total weight of the machine is 4700 kg. Technical specifications of the ENGEL ES 200/75 HL-V injection moulding machine - CNC control: ENGEL - clamping force: 75 t - injection volume: 135 cm3 - injection pressure: 1065 bar - injection speed: ...

ENGEL INSERT 200H/50 injection moulding machine was manufactured in 2007 in Austria. The machine with its small size and large capabilities is used for e.g. overmoulding of inserts and the joining of various materials such as glass, metal and electronics. Thanks to the combination of a clamping force of 50 tonnes and high-quality components, the injection moulding machine guarantees excellent quality of inserts and high repeatability. The machine’s sturdy, solidly built construction features a convenient and easy-to-use ENGEL CC 200 CNC controller for entering all possible process parameters, such as mould clamping force and speed. Once the parameters have been entered, the two halves of the mould are precisely closed, after which the vertical injection moulding machine ENGEL generates a high clamping force. The mould cavity is carefully filled with plastic under high pressure using ...

ENGEL ES 330/80 HLS injection moulding machine built in 1998 in Austria is designed for processing plastics by injection moulding. The injection moulding machine is equipped with top-quality components that increase productivity and efficiency. All parameters are conveniently programmed on the ENGEL CNC control installed on the machine body. The plastic processing machine weighs 4900 kg. Technical specifications of the ENGEL ES 330/80 HLS injection moulding machine - CNC controller: ENGEL - clamping force: 80 t (800 kN) - screw diameter: 35 mm - maximum screw speed: 400 rpm - minimum screw speed: 20 rpm - injection pressure: 1600 bar - injection speed: 113 mm/s - minimum mould height: 200 mm - maximum mould opening stroke: 450 mm - mould mounting platen dimensions (L x W): 660 x 560 mm - maximum distance between platens: 650 mm - mould mounting hole dimension (fixed plate) ...

Key data: 1100 kN

Engel Victory 330/110 Tech / production line with the Engel ER-HLI 41 robot and conveyor belt / machine in very good technical condition Year of construction: 2004 Injection unit: Screw diameter: 40 mm Spray weight: 190 g Injection pressure: 1670 bar Dosing volume: 201 ccm Clamping unit: Clamping force: 110 t Tie bar spacing: 0x0 mm Size of clamping plates: 790x680 mm Ejector: hydraulic Clamping unit: hydraulic Control: CC 100 Additional equipment: Production line with integrated Engel ER-HLI 41 robot and conveyor belt Tie-bar-less machine Hydraulic core pull x 1 Injection unit hardened - Bimetal Machine has been serviced by the authorized service Engel Machine with original protective housing for robot and conveyor belt Metrics: Weight: 7400 kg Length/Width/Height: 5.10x1.50x2.10 m Drive: Pumps/motor: 18.5 kW Heating capacity: 9.2 kW Total power: 2 ...

Engel hose pouring machine type: IT 20000/1800, with Engel ERC 203/1-N Robot control: ERC88 / construction year CC90 A01: In 1991 Schliesseinheit Schliesskraft t: in 1800 cross-beam measure mm: 1400 installation height min / max. mm: 900/1700 record size: In 2100 x in 2100 hose unity snail diameter mm: 160 hose weights gr: 12500 hose volumes cm?: 12958 hose pressure cash: 1600 mass and weights dimensions LxBxH m: 19.8 x 3.5 x 3.1 machine weights kg: 172000 (137000/35000) other with Engel row ERC 203/1-N Robot Euromap 2core

ENGEL Insert 80V/60 year `2011 ENGEL Insert 80V/60 year `2013 ENGEL Insert 80V/60 year `2014 x 5 units *Location : Korea

Key data: 1800 kN

Engel Victory 200H/60W/180 combi / production line with the robot Engel Viper 20 Year of construction: 2015 Injection unit: Screw diameter: 22 mm Injection weight: approx. 54 g Spray pressure: 2392 bar Dosing volume: 61 ccm Clamping unit: Clamping force: 180 t Tie bar spacing: 0x0 mm Size of clamping plates: 1020x980 mm Ejector: hydraulic Clamping unit: toggle lever Control: CC 300 - Touchscreen Additional equipment: 2K machine with the original robot Engel Viper 20 Tie-bar-less machine, hybrid: energy-saving, high-revving and very quiet Operating hours: approx. 20,000 h in automatic mode Euromap 67 Robot Interface Air Valve x 4 Hydraulic Core Pull x 6 Hot runner control x 36 Reinforced Injection Units - Bimetal The second injection unit is angled, screw diameter fi 15 mm (18 cm³ / 2203 bar) Main Motors - 2 x Servo Motor Controlled with Inverter Proport ...

Key data: 1000 kN

Engel e-motion 310/100 / Electric machine / production line with the Engel ERC 13/1-F robot Year of construction: 2007 Injection unit: Screw diameter: 30 mm Injection weight: approx. 102 g Injection pressure: 2400 bar Dosing volume: 113 ccm Clamping unit: Clamping force: 100 t Tie bar spacing: 0x0 mm Size of clamping plates: 810x690 mm Ejector: electric Clamping unit: toggle lever Control: CC 200 - Touchscreen Additional equipment: Machine in perfect technical condition, worked in clean production Tie-bar-less, electric machine: high-speed, energy-saving and very quiet Euromap Robot Interface Control with air valve Hydraulic core pull x 1 Control with hot runners Injection unit hardened - Bimetal Proportional valve on the injection unit – precise injection Central lubrication The machine has been regularly serviced by the authorized service Engel Rob ...

Key data: 2200 kN, 40 mm

Injection moulding machine ENGEL VICTORY VC 650-150 Tech Stock No.: 503440 Manufacturer: ENGEL Type: VC 650-150 Tech Control: CC100 Year of construction: 2005 Hours: 92467 h We are pleased to introduce you to our used ENGEL VICTORY VC 650-150 Tech injection moulding machine. This high-quality machine has a 40mm screw and a clamping force of 1500 kN. Perfect for precision injection molding in a wide range of applications. Please note the increased minimum installation height of 395mm. Technical Data Closing Page Clamping force: 1500 kN Panel size h x v: 750 x 750 mm Min. installation height: 395 mm Plate spacing max.: 995 mm Aperture travel: 600 mm Ejector stroke: 150 mm Ejection force: 61 kN Centering movable plate D: 160 mm Centering fixed plate D: 160 mm Tool weight: 1800 kg Technical Data Spray Side Screw diameter: 40 mm Displacement: 251 ccm Injection ...

This ENGEL E Victory 740/160 injection moulding machine was manufactured in 2011, featuring advanced handling capabilities. Noteworthy for its efficiency and reliability, this machine is a staple for producers seeking precision and durability in their manufacturing processes. The ENGEL E Victory 740/160 stands out for its robust construction and ease of maintenance, making it a valuable asset for any production line. Consider the ENGEL E Victory 740/160 machine we have for sale as a strategic addition to your operations. For more details, please contact us to explore this opportunity further.

Engel hose pouring machine type: 3550/800 duet with Engel Robo control: Construction year CC100: In 1997 Schliesseinheit Schliesskraft t: 800 opening ways mm: 1200 cross-beam measure mm: 1025 x 935 installation heights min / max. mm: 650/ record size: 1570 x 1470 hose unity snail diameter mm: 80 hose weights gr: In 1770 hose volumes cm?: in 1960 hose pressure cash: In 1730/2030 mass and weights dimensions LxBxH m: 8.8 x 3 x 2.30 machine weights kg: 30.000/10.000 other Neureder Robot

Engel hose pouring machine type: IT 1300/300 control: Construction year CC90: In 1988 Schliesseinheit Schliesskraft t: 300 opening ways mm: 600 cross-beam measure mm: 635 x 635 installation heights min / max. mm: 200/660 record size: 910 x 910 hose unity snail diameter mm: 60 hose weights gr: 661 hose volumes cm?: 735 hose pressure cash: In 1900 mass and weights machine weight kg: 12500 other Engel robot

Engel Victory 750/150 Tech (146) without funnel Item number: 146 Availability: In stock Year of construction: 2004 Brand: Engel Specifications Spray weight: 354 g Clamping force: 1,500 kN Screw diameter: 50 mm Spray pressure: 1427(1909) bar Spar spacing: Tie barless mm Clamping plate size: 750 x 850 mm Control: CC200 Language: German Power: 61 kW Operating hours: 98108 h Weight: 9500 kg Dimensions: 5.7 x 2 m Funnel: No Core train: Yes Euromap: Yes