engel 200 used for sale

Turbomixer: 200 litres, make: Henschel, model: FM200A, stainless steel, engine: 37/43 Kw 2-speed 1500/3000 rpm. Electrical panel.

clamping force: 600 kN injection volume: 106 cm³ screw diameter: 30 mm platen size: 590 x 600 mm Condition: used, Specification: Horizontal injection moulding machine, type: System 60/420-200 - Internat. Size specification: 600 - 200 injection unit: - Screw diameter: 30 mm - L/D - ratio: 20D - Injection volume: 106 cm³ - Injection pressure: 1995 bar - Cylinder heating: 8,3 kW clamping unit: - Clamping force: 600 kN - Max. opening stroke: 450 mm - Mould installation height: min. 250 mm - Max. platen distance: 700 mm - Mould clamping platens: 590 x 600 mm - Clear column distance: 420 x 420 mm Total machine: - Oil tank filling: 180 ltr. - Pump capacity: 22 kW - Voltage: 3x 400V, 50 Hz - total power: 30,3 kW - Dimensions L/W/H: approx. 4200 x 1400 x 2000 mm - Weight without oil approx.: 3,950 kg - 2x core pull Plant is still in ...

Emergency generator set 200 kVA Volvo / WA-V 200 S Machine Execution: Unit type: Stationary Design: Soundproofed Technical data engine: Engine manufacturer: Volvo Engine type: TAD 733 GE Engine No.: 5312956418 Motor power: 201 KW Cooling: Water-cooled Power: Electric 12 V DC Speed: 1,500 rpm Fuel: heating oil or diesel B7 Technical data generator: Generator manufacturer: Leroy Somer Generator type: TAL 044 M M 6S/4 Gen.Nr.: 39786300005 Generator capacity: 200 kVA Voltage: 400 / 231 volts Power factor: cos. - phi 0.8 Speed: 1,500 rpm Switchgear: Version: Automatic start Tank: Design: Base frame tank with drip tray Dimensions of the unit: Width approx. mm: 1.200 Height approx. mm: 2.200 Length approx. mm: 3.600 Weight approx. KG: 3.550 Use: Condition: Demonstration machine Year of construction: 2023 Delivery time: immediatel ...

offer 22651 Rotor blade inside belt grinding machine Specifications: - mobile version with motorized forward - reversing + steering -Mot. Grinding stroke forward – reverse with speed regulation - Grinding stroke longitudinally forward + backward -Mot. Contact pressure - grinding pressure regulation - Sanding belt dimensions approx. 2000 x 50 mm - Contact wheel W 60 / D 300 mm - Pneumatic connection 6 bar - Drive 400 V / 2880 rpm / 7 kW - Space requirement approx. W 5700 x H 1200 x D 1400 mm - Weight approx. 800 kg

Qty. 1 Second-hand cut-to-length line – in production Mfc.: Vigano (Italy), PLC: Siemens Built: 2000 available in 9 - 2023 Status: Still in production Strip width: 580 - 2000 mm Thickness: 1.5 – 6.0 mm Max coil weight: 30 tons Max width 1250 mm up to S420MC (max thickness 5 mm) Length of sheet: 580 - 6000 mm Tolerance: +/- 1 Daily production: 80 tons

Teigschlagmaschine verwendet. Die Maschine ist nach einer Generalüberholung betriebsbereit. Enthält zwei Stangen und zwei Kessel. Für weitere Informationen kontaktieren Sie mich bitte.

Converters for bottle vibrators, vibrating bottles, internal vibrators, concrete vibrators -Manufacturer: Wacker -Handover: as is as seen -Transport frame wheels defective, see picture -Motor: 2.8 kW -Vibrating bottle: length 360 mm -Hose length: 5 m -Dimensions: 1150/520/H690 mm -Weight: 116 kg

turning diameter: 1040/1900 mm turning length: 2000/3000/1250 mm swing diameter over bed slide: 740 mm total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m Make: EST-Ticino type: 520/2000 distance between centers min/max: 2000/3000 mm center height 520 mm Max. turning diameter over bed 1040 mm Max. turning diameter over support 710 mm max. turning diameter/length 1900 x 1250 mm spindle passage 135 mm with 3 jaw chuck with 4-jaw chuck quick change holder in very good and immediately ready condition The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Lifting tipper, Fabr. Kemper, Type HK 200 RL

We offer for sale a Cummins gas CHP 2000 KW. Specifications Engine: Cummins Type: D67 Power: 2000 KW Year of construction: 2007 Revolution: 1500 1/min Generator: Stamford Power: 2650 KVA Voltage: 380 V Frequency: 50 Hz Operating hours: 59,000 h

Pneumatic cylinder, air cylinder, pneumatic piston, air piston, standard cylinder -Manufacturer: Atlas Copco, Standard cylinder type C4-200-40 -Stroke travel: 200 mm -Piston rod: Ø 40 mm -Dimensions: 330/280/H510 mm Total weight: 33 kg

Pneumatic cylinder, air cylinder, pneumatic stamp, air stamp, standard cylinder -Manufacturer: Atlas Copco, standard cylinder type C4-200 40-200 -Stroke: 194 mm -Piston rod: Ø 40 mm -Total dimensions: 220/265/H645 mm -Total weight: 24 kg

Machine Details Stock number 1105-03830 Machine type CNC lathe Brand HYUNDAI Type HIT 200 M Year of construction 2000 Control type CNC Control SIEMENS 810 D Storage location FRANCE Country of origin KORREA Delivery time immediately Freight base from stock Price Technical details Turning diameter 325 mm Turning length 400 mm Control SIEMENS 810 D Circumferential diameter over bed 500 mm Travel - x 215 mm Travel - z 420 mm Rapid traverse speed 24 m/min Speed range 30 - 4500 rpm Tool turret 12 FOLD VDI40 Spindle bore 52 mm Mounting cone in the tailstock quill MK 4 Tailstock quill diameter 80 mm Tailstock quill stroke 130 mm Drive power 15 kW Operating voltage 380 V/ 50 Hz Total power requirement 23.5 kVA Machine weight ca. 4.5 t Information MACHINE WITH C AXIS AND DRIVEN TOOLS - Control: SIEMENS 810 D - Hydraulic 3-jaw chuck Ø 204 mm - Tailstock with ...

rotary table dia.: . mm max. dia. of grinding wheel: . mm with manual ongoing: . 0 manually feed: . 0 0.4 KW The technical Data are manufacturer or operator information and therefore non-binding. We reserve the right to prior sale, Our terms and conditions of sale apply exclusively.About usMore than 400 of our own machines in the warehouseMore than 12,000 m² of storage space, crane capacity 70 tMore than 1000 items Accessories for your workshopYou want to sell machines, production lines or your company,then contact us. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Vertical lathe MORANDO 2000 for sale Technical data: - X axis: 1600 mm - Axial travel: 900 mm - Turning diameter: 2100 mm - Maximum turning height: 1350 mm - Platform diameter: 2000 mm - Maximum table load: 21000 kg - Spindle power: 75 Kw - Spindle revolutions/minute: 110 rpm

Three-phase motor, electric motor -Power: 5.5/8/22 kW -Speed: 740/975/1475 rpm -Shaft: Ø 55 mm -Construction: B3 -Protection class: IP 33 -Dimensions: 750/510/H390 mm -Weight: 275 kg

Gear motor, electric motor, three-phase motor -Speed: 114/228 rpm -Power: 0.8/1 kW -Construction: B3 -Diameter shaft: Ø 24 mm -Protection class: -Number: 1x motors available -Price: per piece -Dimensions: 405/225/H210 mm -Weight: 22.3 kg

TECHNICAL SPECIFICATIONS Designation: Discharge belt Version: stationary Axle distance: 6,000 mm Belt width: 1,200 mm Year of construction: 2006 Drive power: 15 kW Drive type: Plug-on gear motor Support: free supporting structure Catwalk: not available Handover: Transfer hood Belt tension: Tensioning carriage Galvanized version: yes SPECIFIC COMMENT - Exhaust conveyor belt with close upper belt stations - No trough angle / straight load flow

Control cabinet, distribution cabinet, control cabinet, TS modular cabinet, profile door -Profile door KTS for: refrigerator -TS single door: 600 x 2000 RAL 7035 -Article No.: 5050154 -Dimensions: 2040/645/H90 mm -Weight: 33 kg

Hydraulic cylinder, support cylinder, hydraulic ram, pressure ram, center mower lifting cylinder -Hydraulic cylinder: stroke 200 mm -Piston rod: Ø 23 mm / thread Ø22 x 50 mm -Mounting: Ø20 x 32 mm -Cylinder: outside Ø 62 mm -Dimensions: 770/70/H62 mm -Weight: 7.2 kg

sheet width: 2000 mm plate thickness: 2 mm distance between columns: 2080 mm total power requirement: 2,2 kW weight of the machine ca.: 2,8 t dimensions of the machine ca.: 3,0 x 1,2 x 1,5 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Max diam 250 , max lenght 2000, 3 x heads , change gears

1 HORST KIND label cut and fold machine type UNI 2000 E year 1988

Workbench, work table, assembly bench -Width: 2000mm -Depth: 700mm -Height: 850mm -Drawers: 3 -Storage: 1 -Number of workbenches: 3 available -Price per piece -Weight: 116kg/pcs

Power resistor, wire potentiometer, resistor, braking resistor, solid tube resistor -Manufacturer: Frizlen, power resistance -Type: FZDPQ 200x35 -Power: 450 W 4.0 ohms -Dimensions: 250/140/100 mm -Weight: 1.7 kg

Used SMG HZPUX 350/200 - 1500/1300 moulding press in good condition! Main technical data: - Power: 510 ton - Maximum span with castle: 1460 mm - Minimum light with castle: 520 mm - Maximum span without castle: 2160 mm - Minimum light without castle: 1220 mm

sheet width: 2000 mm plate thickness: 20 mm pre-bending: 15/11 total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m with initial rounding Technische Daten:/ technical details Biegelänge / bending lenght 2000 mm max. Blechstärke / max. sheet thickness 20 mm Anbiegeleistung / initial rounding 15/11 mm Walzendurchmesser Unterwalzen / roll diameter below rolls 280 mm Oberwalzendurchmesser / diameter of the upper roll 300 mm Antriebsleistung Hauptantrieb / drive capacity main drive 16,2 kW Antriebsleistung Anstellantrieb Oberwalze / drive capacity upper roll 4,8 kW Antriebsleistung Anstellsntrien Unterwalze / drive capacity below roll 3,7 kW Gewicht ca. / weight ca. 14200 kg Technische Daten, Zubehör und Beschreibung der Maschine sind unverbindlich - Technical data, accessories and description of the machine are not binding. The d ...

Clamping angle, clamping aid -Bracket made of: aluminum -Clamping angle for: workpiece clamping -side stop rails -Dimensions: 1155/200/H160 mm -Weight: 22 kg

Hand lever shears, long knife, sheet metal and round steel shears, lever shears -Mubea: sheet metal and round steel shears -Cutting insert length: 200 mm -Dimensions: 380/160/H1240 mm -Weight: 22 kg

Sandpaper, emery paper, abrasive cloth, sanding discs, grinding wheels -Theleico: 42A 60-1 I 6 -Outer diameter: 200 mm -Width: 6 mm -Inside diameter: 40 mm -Price: per piece -Number: 19 pieces -Weight: 0.4 kg

Metronic Romex RFD 2000/4 Type: Stack Material: 20-250my all common materials printable Inking units: 4 Printing ink: Fuel or watercolor Cylinder circumference: from 250mm- 510 mm Cliché thickness: 2.84mm /1.14mm Inking units with doctor blade chambers Material width: 520 Print width: 520 Winder: pneumatic unwinding Dryer: Hot air Side edge controls: 2x BST Railway observation: BST Inline Corona 4,5KW SOFTAL Explosion protection

pneumatic angle grinder, flex, grinding witch, cut-off grinder, cut-off machine, angle grinder -pneumatic straight screwdriver -Operating pressure: 6 bar -Speed: 900 rpm -Price: per piece -Number: 2 pieces -Dimensions: 380/42/H67 mm -Weight: 1.4 kg/piece

live center, live center point, live Morse taper, live center point, live lathe center, center point, centering taper -Manufacturer: Bokö, live centering tip -Type: 2005 -Recording: MK5 -Dimensions: Ø 85 x 252 mm -Weight: 4 kg

Rubber mat, rubber plate, stop rubber, stop plate, rubber cover, rubber pad -Gum plate: from pre-tensioning technology -Thickness: 48 mm -Width: 150 mm -Length: 200 mm -Number: 12 pieces -Price: per piece -Weight: 4.3 kg/piece

Ball Mill Vollrath EFC 200 Wet and dry grinding Ferrous grinding with steatite balls Lining hard porcelain Capacity 200 l Drive power 1.4 kW Speed 42 1/min 3 ball mills each mounted on steel structure Very good operational condition, directly from production!

The scope of delivery includes: 01x Shelf connector, used Material color: blue Manufacturer: Feralco for shelf spacing: approx. 200 mm Total length: approx. 200 mm Profile abm.: approx. 20 x 20 mm Headstock: approx. 100 x 40 x 4 mm Borehole Ø: approx. 9 mm (2 pcs per side) Weight: approx. 0.41 kg | Pcs.

sheet width: 2020 mm plate thickness: 2 mm control: Beijer daylight upper clamping: 100 mm Bending angle: 0 - 135 ° upper clamping drive: 0,375 kW bend clamping drive: 1,125 kW weight of the machine ca.: 2,6 t dimensions of the machine ca.: 3 x 1,1 x 1,75 m Foot switch with emergency stop: Segmented upper tool: Oil filling: exklusive Light barrier control: Machine dealer with own stock of 1600 m². The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Tool holder, milling holder, milling tool, cutter head, face milling cutter, shell end mill, Side milling cutter -Manufacturer: Wodex, side milling cutter -Adjustment: SK50 -Size: Ø 200 x 12 mm -Dimensions: Ø 200 x 220 mm -Weight: 6.3 kg

Marine diesel piston, diesel engine piston -Piston: Ø 199 mm -Piston height: 265 mm -Piston pin: Ø 75 mm -Distance from center of piston pin to top of piston: 155 mm -Quantity: 2 pieces available -Price: per piece -Weight: 9.025 kg

wire electrode, welding wire, welding wire -Eurotrode: Carbo 2002 -Diameter: 1.00mm -Price: per roll -Number: 3 rolls available -Dimension: O 300/100 mm -Weight per roll: 15 kg

Roll Jaws, Floating Center Jaws, Pull-Down Jaws, Machine Vise Jaws -Ground steel jaws: 200 mm -Hole spacing: 140 mm -Price: per piece -Number: 3 pieces -Dimensions: 200/15/H65 mm -Weight: 1.5 kg/piece

Arburg 520C-2000-800 (193) Description with conveyor belt, bimetallic screw General Information SKU: 193 Availability: In stock Year of construction: 2005 Brand: Arburg Specifications Injection weight: 434 g Clamping force: 2,000 kN Screw diameter: 55 mm Spray pressure: 1650 bar Tie bar spacing: 520x520 mm Clamping plate size: 728x728 mm Tool installation height min.: 250 mm Control: Selogica Language: German Power: 44.9 kW Operating hours: 80000 h Weight: 7300 kg Dimensions: 6x2 m Funnel: No Core train: Yes Euromap: Yes

turning diameter: 235 mm turning length: 200 mm turning speeds: 6500 U/min control: Siemens 840D swing diameter: mm turning height: mm workpiece height max.: 100 mm spindle bearing diameter: 90 mm spindle head: A5 total power requirement: 41 kW weight of the machine ca.: 6500 t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Boiler Lifting Tipper Kemper HK 200 R - Boiler tipper Kemper - Model: HK 200 R - for Kemper 150 AL boiler - with boiler drive and boiler shearer - Built in 2005 - Total height 312cm

Roll Jaws, Floating Center Jaws, Pull-Down Jaws, Machine Vise Jaws -Steel jaw: 200 mm -Hole spacing: 140 mm/Ø 11 mm -Dimensions: 200/18/H65 mm -Weight: 1.8 kg

Roll jaws, floating central jaws, pull-down jaws, machine vice jaws, clamping jaws -Pull-down jaws: with magnet -Interior dimensions: 140/160 mm -Groove width: 8 mm -Price: per piece -Number: 2 pieces -Dimensions: 200/30/H100 mm -Weight: 3.1 kg/piece

MEMBRANE SKINNER, MAJA, MODEL: EVM 2000 Technical description: Serial number: 38280 Power supply: 380 V, 3 Ph, 50 Hz, 2.2 A, 0.75 kW Working widht: 420 mm Dimensions: 700 X 700 X 1000 mm

Slotting machine Elmass for wedge tracks from 2.5-14mm. Thanks to the bore-guided tool, even extra-long keyways can be pushed. Tools for standard holes of 6-50mm and groove widths of 2.5-14mm are available. Wedge tracks in blind holes are also possible. Multiple wedge tracks thanks to the 400mm rotary table are feasible.

Mazak Integrex 200 lll S + GL 150 F CNC turning-milling center with second spindle CNC control Mazatrol PC Fusion CNC 640 MT PRO Turning diameter 550/660 mm Turning length 1016 mm Spindle bore diameter 65 mm Spindle speed 35-5000 rpm X-axis travel: 580 mm Y-axis travel 160 mm Z-axis travel: 1045 mm B-axis travel: 225 ° mm C-axis indexing 360° Spindle nose A2-6 Tool cone Capto C6 Number of tools in the magazine 40 If you have any questions about the machine, as well as an appointment for a viewing, please contact us by phone or e-mail.

Roll jaws, floating central jaws, pull-down jaws, machine vice jaws, clamping jaws -1 piece: pull-down jaw -Interior dimensions: 140/160 mm -Groove width: 8 mm -Dimensions: 200/30/H100 mm -Weight: 3.2 kg