engel 200 used for sale

Hand Terminal KeTop Panel C 35 for ENGEL Robot Viper

Description: Machine number: 44575 Spindle diameter 25 mm Stroke 120 mm Spindle speed 380 rpm Max. screw torque 300 nm Max. injection volume 127.6 cm³/s Max. stroke volume 58,9 cm³ Max. injection pressure 2400 bar Max. injection power 42 kW Nozzle stroke 600 mm Nozzle pressure force 14 kN Installed heating power 6.8 kW Closing force 1000 kN Opening stroke 420 mm Mould installation height max. 420 mm, min. 150 mm Ejector force 23 kN Ejector stroke 130 mm Increased clamping plate 740 x 700 mm Width of ejector shaft 470 mm Dry running 1.6 s ENGEL CC 100 control system, 1 pneumatic core pull Tool heating circuits 8 Internal pressure switch KISTLER Nominal voltage : 3x400 + N+ PE /50 Hz Switching load : 95 Kw Rated current : 145 A Voltage control : 230 v AC / 24v DC Approx. Onsite Dimension. (l x w x h): 2,900 x 1,900 x 1,600 mm, weight approx.: 9,500 kg

Manufacturer Engel Type ES 200 -50 HLST CC 100 Control CC 100 Built in 1997 Operating hours h 28000 Closing unit Closing force t 50 Opening path mm 450 Installation height min/max mm 200 / 650 Plate size 660 x 560 Spraying unit Screw diameter mm 30 Dimensions and weights Machine weight Kg 4700 Other

ENGEL ES 200/75 HL-V injection moulding machine was built in Austria in 2000. The highly reliable and robust machine is designed for processing plastics by injection moulding. The high-end components installed on the ENGEL ES 200/75 HL V injection moulding machine guarantee a significant increase in work efficiency and productivity. The machine operating with a force of 75 tonnes works with injection moulds of a minimum height of 200 mm, which are placed on 660 x 560 mm platens. All process parameters are programmed and controlled on the convenient and intuitive ENGEL CNC control, located on the body of the plastics processing machine. The total weight of the machine is 4700 kg. Technical specifications of the ENGEL ES 200/75 HL-V injection moulding machine - CNC control: ENGEL - clamping force: 75 t - injection volume: 135 cm3 - injection pressure: 1065 bar - injection speed: ...

ENGEL INSERT 200H/50 injection moulding machine was manufactured in 2007 in Austria. The machine with its small size and large capabilities is used for e.g. overmoulding of inserts and the joining of various materials such as glass, metal and electronics. Thanks to the combination of a clamping force of 50 tonnes and high-quality components, the injection moulding machine guarantees excellent quality of inserts and high repeatability. The machine’s sturdy, solidly built construction features a convenient and easy-to-use ENGEL CC 200 CNC controller for entering all possible process parameters, such as mould clamping force and speed. Once the parameters have been entered, the two halves of the mould are precisely closed, after which the vertical injection moulding machine ENGEL generates a high clamping force. The mould cavity is carefully filled with plastic under high pressure using ...

Engel Victory 200/50 Focus (150) without funnel General information Item number: 150 Availability: In stock Year of construction: 2007 Brand: Engel Specifications Spray weight: 89 g Clamping force: 500 kN Screw diameter: 30 mm Spray pressure: 1451(2205) bar Spar spacing: Tie barless Clamping plate size: 450 x 500 mm Control: EC 200 Language: German Power: 31 kW Operating hours: 79044 h Weight: 2700 kg Dimensions: 3.5 x 1.4 m Funnel: No Core train: Yes

Engel Victory 200/50 Focus Shot weight: 89 g Closing force: 500 kN Screw diameter: 30 mm Injection pressure: 1451 (2205) bar Column spacing: No columns Plate size: 450 x 500 mm Type of control: EC 200 Language: German, Other Installed power: 31 kW Working hours: 79,044 h Weight: 2700 kg Dimensions: 3.5 x 1.4 m A string of cores

Were parting with our 2 injection molding machines following a reorganization of our workshop. The 1st press were selling is an Engel 200/50 HL-ST (photos in attachment), which works well but has a few jerks during the injection phase, but is functional. The 2nd press is a Demag Ergotech 150-600 (photos in PJ), which works but has a few problems, and can no longer be considered a 150T but rather a 90T (pump wear).

Engel hose pouring machine type: IT 2000-350 controls: CC 90 construction year: In 1987 Schliesseinheit Schliesskraft t: 350 opening ways mm: 700 cross-beam measure mm: 735x735 installation height min / max. mm: 250/660 record size: 1080 x 1080 hose unity snail diameter mm: 70 hose weights gr: 1009 hose volumes cm?: 1154 hose pressure cash: 1400 mass and weights dimensions LxBxH m: 9.00 x 2.10 x 2.40 machine weights kg: 20500 other Euromap 12 angels Robot

Engel hose pouring machine type: IT 20000/1800, with Engel ERC 203/1-N Robot control: ERC88 / construction year CC90 A01: In 1991 Schliesseinheit Schliesskraft t: in 1800 cross-beam measure mm: 1400 installation height min / max. mm: 900/1700 record size: In 2100 x in 2100 hose unity snail diameter mm: 160 hose weights gr: 12500 hose volumes cm?: 12958 hose pressure cash: 1600 mass and weights dimensions LxBxH m: 19.8 x 3.5 x 3.1 machine weights kg: 172000 (137000/35000) other with Engel row ERC 203/1-N Robot Euromap 2core

Engel injection moulding machine Type: It 2000 / 650 control: EC88 year: 1991 Clamping unit Clamping force t 650 Gap mm: 900 Holm dimension mm: min/max height of 1025 x 925 mm: 600 x 1120 Plate size: 1500 x 1390 injection unit Screw diameter mm: Gr 70 injection weight: 1050 Injection volume cm m³: 1154 Spray pressure bar: 1440 Dimensions and weights Dimensions Lxwxh m: 9.8 x 2.7 x 2.3 machine weight kg: 30,000/10,000 Miscellaneous Sanzgiri SMB 621 CM robot system, model 1998 cascade system 4 core puller

Engel injection moulding machine Type: Angel it 330 H/200W/150-2F control: CC 100 A03 year: 2001 Clamping unit Clamping force t 150 Min/max height mm: 1050 Plate size: 820 x 750 injection unit Screw diameter mm: 30/30 Injection weight gr: 104/91 Injection volume cm m³: 128/108 Dimensions and weights Dimensions Lxwxh m: 5.9 x 1.6 x 2.3 machine weight kg: 11,500 Miscellaneous 1 Core battery for injecting including servo valve control 2 components with Angel ERC 23/1-E robot

Engel injection moulding machine Type: 650 H / 500V / 200 HL-2F control: CC100 year: 2000 Clamping unit Clamping force t: 200 gap mm: 700 Min/max height mm: 300 sheets size: 920 x 880 Injection unit Screw diameter mm: Gr 45/25 injection weight: 286/40 Injection volume cm 3: 318/49 spray pressure bar: 1520 / 1230 Dimensions and weights Dimensions Lxwxh m: 6 x 2 x 2.50 machine weight kg: 13,500 Miscellaneous EUROMAP 12 3 component core 2 Tiebarless PDF FILE PRINTING CONTACT

Engel injection moulding machine Type: 650 H / 200 HL control: CC100 built: 1997 Clamping unit Clamping force t: 200 gap mm: 700 Min/max height mm: 250 sheets size: 820 x 750 Injection unit Screw diameter mm: Gr 45 injection weight: 286 Injection volume cm 3: 318 spray pressure bar: 1520 Dimensions and weights Dimensions Lxwxh m: 6 x 2 x 2.2 machine weight kg: 13,500 Miscellaneous Tiebarless core EUROMAP 12 pul PDF FILE PRINTING CONTACT

clamping force: 2000 kN injection volume: 251 cm³ screw diameter: 40 mm platen size: 1.050 x 900 mm daylight between platens - max.: 880 mm Condition: used, very good condition Specification: Vertical injection moulding machine, with rotary table injection unit: - screw diameter: 40 mm - injection volume: 251 cm³ - Injection flow: 244 cm³/sec - Spec. injection pressure: 1,300 bar - Spec. injection pressure increased: 2,020 bar - Nozzle stroke: 500 mm - Nozzle pressure: 51.9 kN Clamping unit: - Clamping force max.: 2,000 kN - Clamping platens hor. x vert. 820 x 459 mm - Max. platen distance: 880 mm - Opening stroke: 400 mm - Mould installation height: 480 mm - Ejector stroke: 105 mm Number of heating zones incl. nozzle: 4 - Heating power: 9.3 kW - Weight clamping unit: 11,000 kg - Weight injection unit: 3.500 kg - Wei ...

clamping force: 450 kN injection volume: 99 cm³ screw diameter: 30 mm platen size: 860 x 320 mm closing stroke: 406 mm Condition: used, Specification: C-Frame Injection Moulding Machine - second-hand Serial No.: 45083 Clamping unit: - Clamping force: 450 kN - Opening travel: 406 mm - Heating plate size: 860 x 320 mm - Mould height min.: 264 mm - Max. plate spacing: 464 mm - Ejector stroke: 20 mm - Ejector force: 20 kN Injection unit: - Screw diameter: 30 mm - Screw length L/D: 17 - Dosing stroke: 140 mm - Stroke volume max.: 99 cm³ - Max. spray weight: 114 g - Screw speed: 20 - 300 rpm - Injection flow: 106 cm³/s - Injection flow increased: 71 cm³/s - Special injection pressure: 1450 bar - Spec. injection pressure increased: 2210 bar - Nozzle path: 200 mm - Operating hours: 54716 h - Pump drive  ...

clamping force: 450 kN injection volume: 135 cm³ screw diameter: 35 mm platen size: 600 x 400 mm Condition: used, Specification: C-frame injection moulding machine for TPE - used clamping unit: - clamping force: 450 kN - heating platen size: 600 x 400 mm - sliding table: yes - Clamping direction: from below - Ejector / lifter: Up + Lo Injection unit: - Injection volume max.: 135 cm³ - Screw diameter: 35 mm - Connected load: 3x 400 V, 50 Hz - Weight approx.: 5,500 kg The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

clamping force: 450 kN injection volume: 99 cm³ screw diameter: 30 mm platen size: 860 x 320 mm closing stroke: 406 mm Condition: used, Specification: C-Frame Injection Moulding Machine - second-hand Serial No.: 45083 Clamping unit: - Clamping force: 450 kN - Opening travel: 406 mm - Heating plate size: 860 x 320 mm - Mould height min.: 264 mm - Max. plate spacing: 464 mm - Ejector stroke: 20 mm - Ejector force: 20 kN Injection unit: - Screw diameter: 30 mm - Screw length L/D: 16 - Dosing stroke: 140 mm - Stroke volume max.: 99 cm³ - Max. spray weight: 114 g - Screw speed: 20 - 300 rpm - Injection flow: 106 cm³/s - Injection flow increased: 71 cm³/s - Special injection pressure: 1451 bar - Spec. injection pressure increased: 2205 bar - Nozzle path: 530 mm - Operating hours: 54716 h - Pump drive  ...

Capacity 700 tones Distance between columns 8080cantimeter

INJECTION UNIT Screw diameter: 30 mm Calculated injection volume: 98 cm³ Pressure on the material: 1450 bars CLOSING UNIT Mold thickness Mini / Max: 190/330 mm

Year of manufacture: 2007 Control Type: CC100 Number of hours: 39600 h Closing force: 50 T Distance between columns: 500 mm x 450 mm Injection volume: 69 cm3 Injection pressure: 2400 bar

Screw diameter 30mm Spray weight 88g Spray pressure 1450bar Dosing volume 99ccm Clamping force 40t Size of clamping plates 550x430mm Controller CC90 (Norwegian language) Weight 3000kg Dimensions 3,51x1,22x1,90m Heating capacity 6.9 kW Total power 21,9kW

clamping force: 250 kN injection volume: 49 cm³ screw diameter: 25 mm platen size: 300 x 300 mm Condition: used, specification: C-frame injection moulding machine - used clamping unit: - clamping force: 250 kN - heating platen size: 300 x 300 mm - clamping/opening stroke: 330 mm - Closing direction: from below - Lateral ejector: yes - Ejector stroke/force: 115 mm / 12 kN Injection unit: - Injection volume max.: 49 cm³ - Screw diameter: 25 mm - Screw length: 16 - Screw speed max.: 250 rpm - Injection: from above - Voltage: 3x 400 V, 50 Hz, N, PE - Connected load: 55 kW/92 A - Weight approx.: 3,500 kg Various accessories are also available: - Injection unit (25 screw) - 2 heating plates - Funnel and various small parts The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Description Mold heating 32 zones MACHINE SOLD IN THE STATE IN WHICH IT IS Missing monitor and floppy drive Missing tabs: - 2 AR281 cards - 3 TT081 boards - 1 PS244 / A card - AS141 connector (for closing transducer)

Description Compression machine with rotating table diam. 1600 n. 3 heating floors, dim. 590 x 650 Opening stroke: 400mm Minimum mold: 100mm

Description Compression machine with rotating table diam. 1600 n. 3 heating floors, dim. 590 x 650 Opening stroke: 400mm Minimum mold: 100mm

Description Compression machine with rotating table diam. 1600 n. 3 heating floors, dim. 590 x 650 Opening stroke: 400mm Minimum mold: 100mm

Description 13 zone mold heating working hours: 3447

Screw diameter: 30mm, clamping force: 50t, heating output: 11kW, weight: 2.9t, with documentation, an inspection is possible.

Clamping force: 200t, max. operating temperature: 400°C, clamping plate dimensions: 1020x605mm, min. tool installation height: 680mm, opening path: 400mm, max. tool weight: 3,2t, shot weight: 50- 600g, screw diameter: 55mm, L/D20, with 2x core puller hydraulic 1-fold, 2x core puller pneumatic, 1-fold mold temperature control, standard up to 90°C, an on-site inspection is possible.

Used machine in good condition. Available for immediate delivery. - Air Valves: n/a - Distance between tie-bars (h x v): 460 x 410 mm - Screw diameter: 25 mm - Shot weight max: 54 g - Injection rate: 108 cm?/s - Injection pressure: 2.400 bar - Injection volume: 59 cm? - Screw L/D ratio: 24,8 - Nozzle stroke / force max.: 225 / 28 mm / kN - Clamping force: 1.000 kN - Mould opening stroke max: 350 mm - Mould height max: 450 mm - Mould height min: 150 mm - Daylight between platens max: 800 mm - Platen size (h x v): 650 x 600 mm - Cascades / Sequential valve gates: n/a - Heating zones: 4 2 - Control: CC200 - Core pulls: n/a - Oil tank capacity: - l - Operating hours: 16.280 - Power: installed max: 22 kW - Weight: 4.500 kg - Dimensions (long x wide x high): 4.300 x 1.300 x 1.900 mm

Used machine in good condition. Available for immediate delivery. - Screw diameter: 25 mm - Clamping force: 1.200 kN - Shot weight max: 63 g - Injection rate: 104 cm?/s - Injection pressure: 2.400 bar - Injection volume: 69 cm? - Screw speed: 550 rpm - Screw L/D ratio: 24,8 - Nozzle stroke / force max.: 200 / 28 mm / kN - Ejector stroke / force max.: 130 / 40 mm / kN - Mould opening stroke max: 500 mm - Mould height min: 300 mm - Daylight between platens max: 800 mm - Platen size (h x v): 740 x 470 mm - Mold opening force: 38 kN - Control: CC200 - Oil tank capacity: 300 l - Power: installed max: 22 kW - Weight: 7.200 kg - Dimensions (long x wide x high): 4.400 x 1.500 x 2.000 mm

Used machine in good condition. Available for immediate delivery. - Screw diameter: 25 mm - Clamping force: 1.200 kN - Shot weight max: 63 g - Injection rate: 104 cm?/s - Injection pressure: 2.400 bar - Injection volume: 69 cm? - Screw speed: 550 rpm - Screw L/D ratio: 24,8 - Nozzle stroke / force max.: 200 / 28 mm / kN - Ejector stroke / force max.: 130 / 40 mm / kN - Mould opening stroke max: 500 mm - Mould height min: 300 mm - Daylight between platens max: 800 mm - Platen size (h x v): 740 x 470 mm - Mold opening force: 38 kN - Control: CC200 - Oil tank capacity: 300 l - Power: installed max: 22 kW - Weight: 7.200 kg - Dimensions (long x wide x high): 4.400 x 1.500 x 2.000 mm

Key data: 2000 , 55

warehouse no.: 503272 manufacturer: ENGEL type: VICTORY 1050-200 Power controller: EC100 A03 year of construction: 2004 clamping force: 2000 kN size of mould plates h x v: 860 x 830 mm min. mould height: 300 mm max. open daylight: 1050 mm opening stroke: 750 mm screw diameter: 55 mm swept volume: 511 ccm injection pressure: 1622 bar measures of machine lxbxh: 6.6m x 1.8m x 2.3m total weight: 12900KG equipment included screen text slovenian core pulling hydraulically 1x core pulling pneum. 1x air valve 1x machine incl. water flow regulator machine without material hopper machine without hopper loader Anti vibration mounts interface for ejector plates safety interface for dosing unit

Ref. no.: 18092 Producer: ENGEL Year of construction: 2001 Clamping unit Clamping force: 300 ton Opening stroke: 855 mm Platen size (h x v): 1050 x 650 mm Injection unit Screw diameter: 60 +35 mm Injection volume: 735 +135 cm³ Shot weight: 662 + 122 g Injection pressure: 1834 +1620 bar Measurements and weight Dimensions: 7,75 x 2,35 x 2,6 m Machine weight: 25250 kg

Key data: 500 kN, 88 g/PS, 30 mm

Clamping force:5,000 N Screw diameter:30 mm Total height:1,950 cm Total weight: 3,400 kg Spray weight: 88 g Total length: 4,500 cm Total width: 1,250 cm Displacement 98 cm³ Engine power 15 kW. Heating Capacity: 6.9 k W Ejector force: 2,540 N Ejector stroke: 100 mm Input power: 15 kW (20.39 hp) Panel width: 550 mm Panel length 320 mm Screw diameter 30 mm Displacement 98 cm³ Specific injection pressure 1450 bar Screw speed 20-480 1/MIN Heating capacity 6.9 kW Cda3icllsq Nozzle contact force 28 kN Opening travel 330 mm, Ejector travel 100 mm, Ejector force 25.4 kN Oil tank 160 L

Key data: 500 kN, 88 g/PS, 30 mm

Clamping force:5,000 N Screw diameter:30 mm Total height:1,950 cm Total weight: 3,400 kg Spray weight: 88 g Total length: 4,500 cm Total width: 1,250 cm Displacement 98 cm³ Engine power 15 kW. Heating Capacity: 6.9 k W Ejector force: 2,540 N Ejector stroke: 100 mm Input power: 15 kW (20.39 hp) Panel width: 550 mm Panel length 320 mm Screw diameter 30 mm Displacement 98 cm³ Specific injection pressure 1450 bar Screw speed 20-480 1/MIN Heating capacity 6.9 kW Nozzle contact force 28 kN Opening travel 330 mm, Ejector travel 100 mm, Ejector force 25.4 kN Oil tank 160 L

Manufacturer : ENGEL Model: VICTORY 200-45T Year of manufacture: 2005 Number of hours: 42500 h Closing force: 45 T Control Type: CC100 Opening stroke: 400 mm Distance between columns: 500 x 450 mm Tray dimensions: 500 x 450 mm Mini/maxi mould: 200 mm Max gap between trays: 600 mm Screw diameter: 25mm Screw length: 20D Injection volume: 69 cm3 Injection pressure: 2400 bar Motor power: 15 kW Heating power: 12 kW Closing weight: 2.9 T Dimensions length: 3.4m Dimensions width: 1.3 m Dimensions height: 1.80 m Cores: 0 robot interface Bi-metal

Control type: CC200 Number of hours: 45,000 hours Closing force: 50T Opening stroke: 400 mm Between columns: 500 mm x 450 mm Tray dimensions: 500 m x 450 mm Mini/maxi mold: 200 mm Max distance between trays: 600 mm Injection: Screw diameter: 25 mm Screw length: 24.8D cm3: 69 Bars: 2400 General: Motor power: 15KW Heating power: 6.8KW Closing weight: 3T Injection weight: Length dimensions: 3.4M Width dimensions: 1.3M Dimensions height: 1.8M Options: Cores: 1 Robot interface: yes Bi metal: yes

Year of manufacture: 2000 Screw diameter: 25 mm Injection volume: 69 cm3 Length/Diameter ratio: 24.8 L/D Maximum injection rate: 104 cm3/s Pressure on the material: 2000 bar Temperature zones: 4 Closing force: 500 kN Mold thickness: 200 mm Heating power: 6.8 kW Total installed power: 15 kW Oil quantity: 140 L Machine dimensions: 3800 x 1280 x 1970 mm Machine weight: 4700 kg

Injection weight: 50 g Closing force: 500 kN State: Used Screw diameter: 25 Injection pressure: 2400 Column spacing: 320x370 Size of plates: 520x470 Min mold height: 150 Control type: LC 200 Tongue: English,Other Installed power: 14 Working hours: 37500 Libra: 3400 Dimensions: 3.8 x 1.3 Feed hopper: NO Robot socket: Yes Air valve: Yes

Key data: 500 kN, 50 g/PS, 25 mm

Angel E-Max 200-50 (215) General information SKU: (215) Availability: In stock Year of construction: 2008 Brand: Angel Specifications Spray weight: 50 g Clamping force: 500 kN Stand: Used Screw diameter: 25 mm Injection pressure: 2400 bar Tie bar spacing: 320 x 370 mm Clamping plate size: 520 x 470 mm Tool installation height min.: 150 mm Control: LC 200 Language: English/ Swedish Power: 14 kW Hours: 37500 h Weight: 3400 kg Dimensions: 3.8 x 1.3 m Funnel: No Euromap: Yes Air Valve: Yes

Inv. Num. : 7423 Type: ES 200/50 HL ST Producer: Engel Created: 1998 Parameters: Clamping force: 50 t Plate dimensions: 510x320 mm Injection weight: 4700 kg