emc used for sale

Messsystem für Polar 155 EMC Duxon SMD / Measuring System for Polar 155 EMC Duxon SMD Serial-No. 022 490 Messsystem für Polar 155 EMC Duxon SMD Measuring System for Polar 155 EMC Duxon SMD Online-Video-Inspection by Skype-Video We would be very pleased with your visit - more machines on Stock Available Immediately - Can be inspect On Stock Emskirchen / Nürnberg - Can be test

EMCO - Loading arm 4 inches - used - as spare part carrier

Traypacker power food Capacity: 14,400 cups/h à 125 g / cups, used in very good condition Technical data: production capacity: 40 cartons / min 6 Cup/tray = 240 cups per minute = 14,400 Cup 125 g / Cup year: 2008 Dimensions: Ready-cut pieces Lxwxh: 698,5 x 168,0 x 1.5 mm Cover LxDxH: 95.5 x 95.5 x 9.0 mm Cup DxH: 92.5 x 42.0 mm machine dimensions: Lxwxh: 7500 x 7400 x 3000 mm Weight: approx. 6,800 kg Original price: 950,000

Machine according to DIN 8605: lathe with increased accuracy. Top width: 700 mm Tip height: 170 mm Swing over bed: Ã? 340 mm Swing over cross slide: Ã? 190 mm Bed width: 260 mm Longitudinal slide displacement: 600 mm Cross slide displacement: 220 mm Upper carriage displacement: 110 mm Plan carriage length: 410 mm Plan slide width: 150 mm Bed slide length: 380 mm Turning tool cross section: 20 x 20 mm Distance turning Center - upper carriage: 34 mm Range of the upper carriage (support): 60 / 120 ° Main spindle: Spindle connection DIN 55029 (camlock): S 5 spindle bore: Ã? 50 mm Internal cone according to DIN 7178: 1:22 spindle diameter in front bearing: Ã? 70 mm Maximum Chuck diameter: Ã? 200 mm Faceplate diameter: Ã? 200 mm Spindle speeds: 40-3000 rpm Speed: Stepless mechanical speeds: 4 Main drive: Power at 40% ED: 5,3 kW Maximum nominal torq ...

; Spare parts source

Metal Detector Loma Systems EMC90541-14363 -Metal detector -Manufacturer: Loma Systems -Weight 185cm -Inlet tunnel: 35cm wide and 11.5cm high -380 Volt 3OPh 50Hz

This 3-axis EMCO EmcoMill E900 was manufactured in 2018. The vertical machining center is equipped with a Siemens 828D control system and offers a spindle speed of up to 12,000 rpm and a torque of 83 Nm. It has a travel of X 900mm, Y 500mm, Z 500mm and a rapid traverse speed of 24m/min. The machine has a 360l coolant pan and a 20-cavity tool magazine. If you are looking for a high-quality milling machine, you should consider the EMCO EmcoMill E900 machine that we have for sale. Contact us for more information. Brand: SIEMENS Model: 828 D Spindle Speed Range: 50-12000 Number of axes: 3 X-axis travel: 900 mm X-axis rapid traverse: 24 m/min Y-axis travel: 500 mm Rapid traverse Y-axis: 24 m/min Z-axis travel: 500 mm Rapid traverse Z-axis: 24 m/min Outer length: 1000 mm Outer width: 520 mm Minimum distance between vertical spindle and table: 100 mm Maximum distance between ver ...

Key data: 85 mm, 255 mm, 6300 1/min

CNC lathe Emco E25 Powermill TCM Commissioning 03/2019 At call! Siemens 828D Shopturn Main spindle spindle passage 25mm PF - 6,300 1/min Turret 12-speed VDI16 driven tools 6,000 1/min PC Keyboard Machine set-up and fastening material Parts collection device Emco Standard Bar Feeder Interface Machine Status Lamp LED Multiflow Cleaning Gun 8-bar high-pressure coolant device Power Chuck 95/3 Röhm Pliers chuck KZF 20 for 148E Tool holder pact stationary/driven 9 pieces Radial Milling Holder VDI16 2 WStück Axial Milling Holder VDI16 2 WStück OPC UA / Siemens interface The options list is complete! No interest in dealer enquiries! No separate dealer price! WB mechanics GmbH is a precision mechanics workshop that markets its used machines on its own. We are not a machine dealer, but the machine user! The machine is in use in our company until it is sold a ...

Stock Number: 3780 CNC LATHE Manufacturer: EMCO, Type: HYPERTURN 665 MC PLUS Machine NO.: R7AQ2301, Year of manufacture: 2002 Specifications: Max. swing diameter 430 mm dia. Max. rotary. About Bed 600 mm Dia. Turning length 744 mm Distance between spindle lugs 975 mm Main engine power 21/29 kw Main spindle speed range 0-5000 rpm Bore through drawing tube 65 mm dia. C axis - main spindle movement 0.001 degree Y axis 100 +/- 50 mm B Axis Movement Stepless 45 Degree Tool turret 1 with 12 VDI 30 stations Powered stations turret 1 12 pc. - 4000 rpm Y+B pieces. Engine power driven tools 6.7 Kw Tool turret 2 with 12 pc. VDI 30 stations Counter spindle C axis - counter pindel movement 0.001 degree Counter spindle speeds 0-5000 Pr/min Motor power counter spindle 17/22 Kw Control Siemens 840 D Fabr. Power on 10650 hours Controlled in 8 axis - x1-x2-z1 ...

Lean emission controller for gas engines with cogeneration units, Motortech EMCon5 for sale, with original packaging

turning diameter: 200 mm turning length: 0,0 mm control: Siemens 810 D working spindle speed range: 4200 U/min travel -x axis: 210 mm travel -z axis: 610 mm spindle passage: 65 mm total power requirement: 0,0 kW weight of the machine ca.: 4,5 t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

We sell 10 x EMC Centera nodes 1 x EMC Celerra VNX5500 Complete configuration on request. In most cases, the entire lot can only be handed over in its entirety. More information on request. In most cases, advertised products can only be sold as a complete lot. More information on request. We look forward to receiving inquiries from Germany and internationally. We have many more refurbished/used hardware from the areas of the systems mentioned here as well as from the areas of other systems from these manufacturers available: IBM, DELL, HPE, ORACLE, NETAPP, QUANTUM, STK, FUJITSU, SGI, HDS, EMC, Supermicro, BULL, NEC, CRAY, 3Com, ADVA, Alcatel, Brocade, Cisco, Enterasys, Extreme Networks, Huawei, Marconi, Nortel, Qlogic, Avaya, ORACLE Tested, tested used hardware at low prices from HASCON! Sales are only made to companies. We have available complete systems and compo ...

Metal detector, Fabr. Boekels, Type EMC 50 x 12,5

WE OFFER AN NICE CONDITION TWO MACHINES EMCO HYPERTURN 665 WITH BARR FEDERS AND TOOLS ACCESSORIESS YEAR: 2005 FULLY FUNCTIONAL , READY TO WORK CONNECTED ON POWER. FOR THE CUSTOMER WE ORGANIZE DISMANTLING LOADING AND TRANSPORT TECHNICAL DATA: Specifications: Max. swing diameter 430 mm dia. Max. rotary. About Bed 600 mm Dia. Turning length 744 mm Distance between spindle lugs 975 mm Main engine power 21/29 kw Main spindle speed range 0-5000 rpm Bore through drawing tube 65 mm dia. C axis - main spindle movement 0.001 degree Y axis 100 +/- 50 mm B Axis Movement Stepless 45 Degree Tool turret 1 with 12 VDI 30 stations Powered stations turret 1 12 pc. - 4000 rpm Y+B pieces. Engine power driven tools 6.7 Kw Tool turret 2 with 12 pc. VDI 30 stations Counter spindle C axis - counter pindel movement 0.001 degree Counter spindle speeds 0-5000 D46485 Pr/mi ...

Lathe Emco turn 365 tcmy , energized Year of Make: 2003 Operating hours: only 4893.3 h Condition: Very good Technical details • Control: Siemens Sinumerik 810 D • X-axis travel: 210 mm • Z-axis travel: 610 mm, programmable tailstock • Y-axis travel: +- 40mm • Circumferential diameter over face slide: 360 mm • Spindle size: 65 mm diameter/passage • Tool carrier: 12-cavity tool turret • Tool holder: VDI 30 • Powered stations: 12 • Speed range driven tools: 0 – 4,000 rpm • Rapid traverse X/Z axis: 24 m/min • Feed force X/Z axis: 5,000–7,000 Nm • Contact force: 8,000 Nm • Workpiece size with tailstock: 200 × 520 mm diameter Machine Details • Dimensions: 4.0 x 2.5 x 2.5 m • Weight: 6 t • Operating voltage: 400 V • Frequency: 50–60 Hz • Rated current: 29 A Equipment: Oil cooler Parts catcher Accessories: Power chu ...

M. No.: 5511244 Format (cm): 92 Equipment / Additional information: Side table, air table, safety barriers, 1xreserve knife VIBRO TABLE RB2 M. No.: 5581092

Dear Ladies and Gentlemen, the machine is to be returned immediately.the machine ran in a single shift, the Siemens modules are new

Stock number: 3922 PROCESSING Manufacturer: EMCO, Type: MILL E-600 Machines NO.: M-06204707, Year of manufacture: 2007 Specifications: Table size 700 x 500 mm Large table load 500 kg Longitudinal movement (X) 600 mm Transverse movement (Y) 500 mm Vertical movement (Z) 500 mm Size distance spindle/table 700 mm Spindle cone 40 iso Stepless spindle speeds 10000 rpm Total power 16 KVA Tool changer 20 places Control Fanuc Oi-MC Fabr. Controlled in axes 3 Operating hours spindle 3167 hours Accessories: Cooling by spindle Chip conveyance. Cooling water system. Length: 2040 mm, Height: 3000 mm, Width: 2500 mm, Weight: 3800 kg

Machine Type: NC Cycle Lathe Manufacturer: Emco Type: Emcomat EM300x2000 Year of Make: 2015 Condition: used / very good, few operating hours Serviced exclusively by Hedelius Offer will only be sent if a complete imprint is provided! Price VB Location Warstein , Germany Reference MV-EMC-0824 DESCRIPTION We offer you a used NC cycle lathe from the manufacturer Emco. Control Fagor Spindle speed max. 2500 Multifix Base Holder Tip width 2000 Availability: immediately Our offer is aimed at tradespeople who are registered within the meaning of the Trade Regulation Act according to §14 GewO. The offer is subject to change, subject to prior sale. Please provide your full contact details to receive a quote with our terms and conditions of payment. Errors in the descriptions and offers are reserved

turning diameter: 420 mm turning length: 600 mm control: Sinumerik 810D spindle turning speed range: 4200 U/min spindle motor: 18 kW spindle bore: 65 mm x-axis: 210 mm z-axis: 610 mm greates pass round over bed: 600 mm swing diameter over slide rest: 360 mm tailstock travel: 500 mm tailstock quill taper MT: 4 dimension of workpiece: dia 200 x 520 mm total power requirement: 20 kVA weight of the machine ca.: 4,5 t dimensions of the machine ca.: 3 x 1,9 x 1,9 m - CNC control Siemens Sinumerik 810D - 12-position turret (VDI 30), driven tools 4000 rpm - Main spindle - Tailstock (MK 4) - C-axis - Coolant device - suction unit - Chip conveyor Machine has mainly processed plastic The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Electric Stacker JUNGHEINRICH type EMC B10 Year of construction: 2005 Maxi loading capacity: 1000 KG Centre of gravity: 600 mm Maximum width of the lower forks: 1250 mm Total length of the lower forks: 960 mm Equipped with new batteries (October 2024) Length: 1500 mm Width: 1250 mm Total Lift height: 1650 mm Weight: approx. 500 kg

Operating hours: 600h Specifications: Travel in X/Y/Z: 450 / 350 / 400 mm Distance from spindle nose table: 230 - 630 mm (horizontal milling spindle) Rapid traverse speed X/Y/Z: 5000 / 5000 / 5000 mm/min Working feed X/Y/Z: 10 - 2000 mm/min infinitely variable Max. feed force in X/Y/Z: 10 / 10 / 15 kN Clamping surface: 800 x 400 mm (rigid angle table) Max. table load: 30 kg (rigid angle table) Vertical milling head: Speed range: 10 - 5000 1/min Power: 10 kW Dimensions (LxWxH), approx.: 1980 x 2030 x 1990 mm Weight, approx.: 2270kg Equipment: - Swivel control panel - Shafts and gears hardened and ground - Digital display Sinumerik 828D - Clockwise / counterclockwise rotation of the main spindle - Linear guides - Four-bearing milling spindle radial/axial - All pinch points eliminated by covers - Main motor with spindle brake

turning diameter: 250 mm turning length: mm control: Siemens 840D 0 total power requirement: 25 KVA kW weight of the machine ca.: 4 t required space: 5.5 x 2.5 x 2.5 m m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

ELECTROMASHSTAN EMC-SP/3/05 Sigma roll forming line was built in 2019 in Ukraine by ElectroMashStan. The line is designed for the production of precision Sigma-type cold-formed profiles, which are used in among others steel structures, load-bearing elements and supports. The production cycle is fully automatic, thanks to the use of an automatic sheet decoiler. The strip with a maximum thickness of 3 mm is uncoiled towards the workspace, where it is formed using rollers. The ELECTROMASHSTAN roll forming line offered is fully complete. Applications for Sigma profiles: – steel constructions (halls, warehouses, industrial buildings) – prefabricated buildings and light steel construction systems – load-bearing elements (girders, columns, beams) – brackets, bracing and structural frames – wherever a high load-carrying capacity is required in a relatively lightweight construct ...

Key data: 600 mm, 200 mm

Machine : Rigid angle tables for milling machines Make : EMCO unused – slight traces of storage Clamping surface : 600x200mm, 4 T-slots 12mm, spacing 45mm Vertical: Hole spacing: 90mm/390mm, for T-slot 12mm Dimensions: Length :60cm ; Width : 20 ; Height : 18cm; Weight: 44 kg PRICE : € 480,- Even larger MAHO or lids, ... Mounting plates: A - Length : 240mm ; Width : 120mm ; Height : 35; 3 T-slots 11mm spacing 45mm, (1x) PRICE : € 100,- B - Length : 420mm ; Width : 125mm ; Height : 46; 2 T-slots 11mm spacing 90mm (4x) PRICE : € 100,- C - Length : 520mm ; Width : 180mm ; Height : 56; 3 T-slots 12mm spacing 45mm (1x) PRICE : € 150,- D - Length : 600mm (660); Width : 180mm ; Height : 75; 2 T-slots 12mm spacing 90mm (3x) PRICE : € 180,-

Workspace: - Travel in X/Y/Z: 220 / - / 710 mm - Center width: 700 mm - Tip height: 170 mm Main spindle: - Max. speed: 3000 rpm - Spindle connection: size 5 (DIN 55029) - Max. drive power: 5.3 kW Tailstock: - Inner cone: MK3 - Quill stroke: 120 mm - Inner cone of the quill: 50 mm

Technical data and equipment: Travel X/Z - X2/Z2: 270/750 // 205/750 mm Travel Y: 100 (+-50) mm Max. rod diameter: 65 mm Main spindle drive: 0 - 5000 rpm Sub-spindle drive: 0 - 7000 rpm Tool holder: VDI 30 Control: Siemens Sinumerik 840 PL Revolver: 2 pcs. for applied Tools (12 slots each) Turret: Upper turret is equipped with Y-axis Spindle: 2 pcs main and counter spindle with C-axis Accessories for the machine: - Bar feeder Irco Profimat 70.6/270.6 - Internal cooling - Driven tools (straight and angled) - Chuck for main and counter spindle -Suction -Conveyor - Pick-up device with outfeed conveyor - KSS system Knoll SF 1000/Turbo-1 - Various holders approx. 80 pcs VDI 30 - Drill rod holder - Muzzle holder Machine space requirements: 3400 x 2600 x 2300 mm // 7600 kg

One used guillotine Polar 115EMC MON year 1994 with monitor programming sidetabes chromed table

CNC turning-milling center Emco Hyperturn 65 Powermill SMYB Commissioning 7/2019 At call! Siemens 840D-SL Shopturn Main spindle BigBore spindle passage 76mm KK8 - 4,000 1/min Sub-spindle KK6 - 5,000 1/min 40-speed chain magazine HSK-T63 Turret bottom VDI30 / Sauter Electronic handwheel Emco Tool Breakage and Wear Gear milling Shopturn Expansion Pack 5-axis simultaneous machining Energy management for Sinumerik OPC UA / Siemens interface 3D machine model Emco Standard Bar Feeder Interface Machine Status Lamp LED Multiflow Cleaning Gun Oil Mist Separator Belt filter system with IKZ Main Spindle Clamping Hook Hainbuch Clamping Top Mini Combi Ax Hoist Sub-spindle Schunk 185mm THW-plus with hard jaws The options list is complete! No interest in dealer enquiries! No separate dealer price! WB mechanics GmbH is a precision mechanics workshop that markets its ...

CNC turning-milling center Emco Hyperturn 65 Powermill SMYB Commissioning 10/2017 At call! Siemens 840D-SL Shopturn Main Spindle SuperBigBore Spindle Passage 95mm KK8 - 3,500 1/min Sub-spindle KK6 - 5,000 1/min Milling spindle HSK-T63 12,000 1/min / new milling spindle 2024 40-speed chain magazine HSK-T63 Turret bottom VDI30 / Sauter Electronic handwheel Emco Tool Breakage and Wear Gear milling Shopturn Expansion Pack 5-axis simultaneous machining Energy management for Sinumerik OPC UA / Siemens interface 3D machine model Emco Standard Bar Feeder Interface Machine Status Lamp LED Multiflow Cleaning Gun Oil Mist Separator Belt filter system with IKZ Main Spindle Clamping Hook Hainbuch Clamping Top Mini Combi Ax Hoist Sub-spindle Schunk 185mm THW-plus with hard jaws The options list is complete! No interest in dealer enquiries! No separate dealer price!  ...

Control Siemens 828D - ShopTurn Rotary diameter. [mm] 500 Turning length [mm] 520 Main spindle: Belt spindle technology Speed 5,000 rpm Power (max.) 22 kW Torque (max.) 305 Nm Bar passage 65 mm Workpiece clamping 3-jaw chuck, SMW Autoblok 210 BB Tool carrier (X/Y/Z): Technology Turret with 12 stations Tool holder VDI 30 Tool drive 5,000 rpm, 5 kW, 20 Nm Travel in X/Y/Z 260/80/610 mm Rapid traverse in X/Y/Z 30/15/30 m/min Tailstock: Technology Hydraulically driven Contact force (max.) 8,000 N Stroke 500 mm Cone MK4 Equipment/accessories: Chip management chip tray Coolant management IKZ pump with high pressure, 14 bar Raw material feed interface bar feeder prepared Precast Removal Parts Catcher with Conveyor Belt Tool holder Div. gebr. rigid and driven holders Other equipment Rinsing gun

brinell hardness: . rockwell hardness: . throat: . mm total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

with UniRobot FMB Control: SIEMENS 828D Circulation over bed: Ø 540 mm Circulation via face slide: Ø 360 mm Spindle – tailstock: 680 mm Max. turning diameter: Ø 310 mm Max. part length: 520 mm Max. bar diameter: Ø 65 mm Travel distances: X= 210, Z= 610 mm Max. chuck size: Ø 254 mm Main spindle: 15/18 kW (100%, 60% ED) Speed range: 60 – 4200 rpm infinitely variable Max. torque: 192 NM C-axis Rapid Traverse: 1000 rpm TOOL TURRET 12 stations all powered Recording: VDI 30 Speed range: 0-5000 rpm Max. drive power: 5 kW Max. torque: 20 Nm Automatic tailstock, hydraulic Travel: 500 mm Inner cone: MK 4 Robot Cell FMB MH5L-XP With robot Yaskawa Motoman MH 5 L Max. load capacity: 5 kg Max. working radius: 895 mm Weight: 27 kg Workspace: S-axis (rotation): -170° ~ +170° L-axis (forearm): -65° ~ +150° U-axis (upper arm): -138° ~ +255° R-axis (ha ...

2006 Emco MCP 100-50 The EMCO MCP 100-50 is a CNC milling machine that is equipped with two pallets. This configuration enables precise machining of workpieces while the second pallet can already be re-clamped. This allows non-productive times to be reduced enormously. Characteristics: Construction year: 2006 Spindle hours: 6152 Travel X: 1000 mm Travel path Y: 500 mm Travel path Z: 500 mm Tool holder: SK40 Furnishing: 4th axis: Yes, built 5th axis: no Pallets: two Wkz.-Magazin: 30 places Bandfilter: And Teat feeders: And Steering: Siemens 840D Tool package: SK40 recording package incl. Find more here - / Contact us at -

Emco F3 - Milling Machine - Vise - Workplace lighting - Coolant device - Tools & Machine Feet Technical data Working Range: - Slide path longitudinal: 300 mm - Slide path transverse: 200 mm - Vertical slide path: 350 mm - Quill stroke for vertical milling spindle: 45 mm - Vertical milling head swivel: ± 90 ° Clamping surface: - Table dimensions: 600 × 200 mm - 4 T-slots: 12 x 21 mm - Groove spacing: 45 mm Spindle: - Tool holder: DIN 2078 / SK30 - Tool clamping: Pull-out screw M12 - Spindle speeds: 80 / 160 / 245 / 360 / 490 / 720 / 1100 / 2200 rpm Automatic feed for longitudinal slides: - Feed force: 1600 N (160 kp) - Speed: 20 - 200 mm/min (infinitely variable) - Rapid traverse: 1200 mm/min Coolant Facility: - Tank capacity: 30 l - Flow rate: 15 l/min Three-phase motor: - Power: 1.1 / 1.4 kW (60% ED) - Speed: 1400 / 2800 rpm Dimensions: - Dimensio ...

Twin Turret Twin spindle type CNC Lathe Control Unit: Siemens 840 D Turning diameter: 140 mm Turning length: 480 mm Distance main-spindle - subspindle: 720 mm Main spindle hole diameter 42 mm Turret type: 12 station with VDI25 tool holder

Metal detector Manufacturer LOMA IQ2 Type emc Year of manufacture 2001 Belt width 20 cm Height of the passage 12 cm Documents available in German With conveyor belt and ejector

turning diameter:360 mm turning length:520 mm total power requirement:20 kW weight of the machine ca.:3,8 t dimensions of the machine ca.:3 x 2 x 2 m

turning diameter:360 mm turning length:520 mm total power requirement:20 kW weight of the machine ca.:3,8 t dimensions of the machine ca.:3 x 2 x 2 m

Control Fanuc 21T Turning diameter 158 mm Circumferential diameter over bed 340 mm Speed 6,000 min-1 8-speed revolver Tailstock 3-jaw chuck, 2-jaw chuck, collet chuck Collets Versatile tool holders

Key data: 2000 mm, 750 mm, 800 mm

Spindle ISO 40 Workpiece weight 2200kg RPM 50 - 15000 kW 46 Volts 400 Cycles 50 Dividing head 250 mm (6th Axis) ATC 40 positions Built in rotary table 800 mm Chip Conveyor

turning diameter over bed:340 mm turning diameter over slide rest:190 mm turning length:700 mm spindle bore:50 mm shaving-spindle speed range:40 - 3.000 U/min dimensions of the machine ca.:2 x 1 x 1,6 m total power requirement:6 kW weight of the machine ca.:1,2 t

turning diameter over bed:340 mm turning diameter over slide rest:190 mm turning length:700 mm spindle bore:50 mm spindle turning speed range:40 - 3000 U/min total power requirement:6 kW weight of the machine ca.:1,2 t dimensions of the machine ca.:2 x 1 x 1,6 m

x-travel: 450 mm y-travel: 300 mm z-travel: 350 mm total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m 3-axes digital read out horizontal and vertical milling spindle quill Technische Daten / technical details: Längsweg X / X-travel longitudinal 450 mm Querweg Y / Y-travel cross 300 mm Senkrechtweg Z / Z-travel vertical 350 mm Tischgröße / table size 800x400 mm Spindelaufnahme / spindle taper SK40 Drehzahlbereich / spindle speed 50-2500 UpM /rpm Vorschubbereich / feed range 8-400 mm/min. Antriebsleistung / power capacity 3,2 kW Gewicht der Maschine / weight 1500 kg Technische Daten, Zubehör und Beschreibung der Maschine sind unverbindlich - Technical data, accessories and description of the machine are not binding. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Main spindle: Technology: Motor spindle Speed: 4,000 rpm Power (max.): 29 kW Torque (max.): 250 Nm Bar Passage: 76 mm Sub-spindle: Technology: Motor spindle Speed: 5,000 rpm Power (max.): 29 kW Torque (max.): 250 Nm Ejector: Pneumatic Travel in Z: 800 mm Tool carrier I (X/Y/Z): Technology: 12-station turret Tool holder: VDI30 Tool drive: 5,000 rpm, 6.7 kW, 25 Nm Travel in X/Y/Z: 260/100/800 mm Rapid traverse in X/Y/Z: 30/12/30 m/min Tool carrier II (X/Z): Technology: 12-station turret Tool holder: VDI30 Tool drive: 5,000 rpm, 6.7 kW, 25 Nm Travel in X/Z: 210/800 mm Rapid traverse in X/Z: 30 m/min Equipment/accessories: Chip management: Chip conveyor Coolant management: IKZ system with paper belt filter and high pressure, 40 bar Raw material feed I: Robot interface prepared Raw Material Feed II: Bar Feeder Interface Prepared Finished part removal ...

Swing diameter over bed/cross slide: 820mm/550mm, distance between centers: 2666mm, max. turning diameter: 610mm, max. workpiece length: 2500mm, travel X/Z: 410mm/2560mm, travel Y: -80mm/100mm, max. workpiece weight without/with tailstock: 500kg/1500kg, tool positions: 12, rapid traverse X/Z/Y: 24m/30m/12m/min, feed force X/Z/Y: 17kN/20kN/17kN. Machine dimensions X/Y/Z: approx. 5500mm/2250mm/2550mm, weight: approx. 15000kg, operating hours: approx. 56089. Documentation available. An on-site inspection is possible. Expected to be available from mid-2026.