27 offers

Category: 105
item-No.: 126313448
Reconditioned 2018 Control: PLC Siemens S7 Blade max: 500 mm Motor output 5.5 KW Saw blade feed: 0-40 mm / s adjustable Saw height control electronic Square 90° maximum working range: 130 x 130 mm Flat 90° maximum work area: 190 x 130 mm Round 90° maximum working range: 170 mm Supply length 2-4000 mm (Saw) approximate weight: 800 kg (Pusher) approx.: 300 kg Dimensions Lxwxh (saw) approx.: 900mm x 1200mm x 1500mm (pusher) approx.: 4800mm x 900mm x 1100mm footprint Lxw 7200 mm x 1200 mm which is mach ...
Category: 202
item-No.: 126907910
1992
1.450 €
Land-de DE
1-Spindel-Kopierfräse Fabrikat: Elumatec Typ: AS 70 Baujahr: 1992 Fräsmotor: 740 W 2800 UpM 380 V 50 Hz Fräsbilder durch Anschlag Fräsbereich: 100 x 250 mm pneumatische Materialspanneinrichtung min. 5 / max. 8 bar Hinweis: Die technischen Daten und Beschreibungen sind Abschrift der damaligen Auftragsbestätigung. Daten dienen zur Information und sind nicht verbindlich.
Category: 105
item-No.: 126313397
DG244/02, 6M CUTTING LENGTH, 5 AXIS DOUBLE HEAD CUTTING OFF MACHINE, WITH CONTROLLER E555 The machine is optionally included, Hydro-pneumatic saw feed The reliable elumatec principle "Cutting from below": Provides unhindered access to support table A large saw blade diameter and optimal use of the saw blade offer an ideal cutting capacity for all cutting variations Standard for elumatec: External dimension cuts at all angle positions. This means no length calculations are necessary when cutting profiles of ...
Category: 109
item-No.: 126895784
Category: 103
item-No.: 126192367
Technical data: -Machine is designed for steel. - + suitable aluminium machining -Operation via two lever - material clamping by pneumatic cylinder -Workpiece width / B 115 mm x 100 mm clamping range -Milling range top to stop/Kopierschabl. B 340 mm x 100 mm - stroke 110 mm above -Milling area down to stop/Kopierschabl. W 240 mm x 90 mm -Hub down front / rear 95 / 45 mm -Spindle speed continuously adjustable 3000 to 12000 RPM -Dosiersprüheinrichtung -Air consumption per work cycle -without ...
Category: 109
item-No.: 125386346
Category: 109
item-No.: 125922472
Vertical/ horizontal working range: 100x290/ 70x270mm, stroke: 120mm, rotational speed: 6000/ 12000/min, profile: 150x150mm, length: 850mm, width: 900mm, height: 1500mm, weight: 270kg.
Category: 109
item-No.: 122051614
Category: 206
item-No.: 125536914
1997
4.957 €
-
Technical data stop station MS 3000: brand: Elumatec Type: MS 3000 Sturdy steel construction ideal for vertical installation suitable for lines smooth intermediate positions for ergonomic working height adjustment with pneumatic cylinder roller pad with steel rollers table top with plastic wear strips ZWE i horizontally sliding profile release compressed air connection 4-technical data 3.110 mm long Width 1,200 mm Vertical height 2.050 mm Height adjustment Pneum.. 500 mm Roll width 200 mm We ...
Category: 109
item-No.: 122051655
Category: 105
item-No.: 125421678
Automatic saw SA 73/36 Description Suitable for high-volume cutting of aluminium profiles for window manufacturing and industrial applications Material infeed (cycling) protects the surface of the workpiece by means of a single-stage profile lifting system One, two or three-stroke feed can be selected using a selector switch Reliable material feed using two horizontal clamping cylinders Automatic machine shut-down at the end of the profile Pulsed coolant system Equipped with saw blade as standard Techni ...
Category: 109
item-No.: 122030275
Category: 105
item-No.: 125421666
Double mitre saw DG 104 Description The optimal double mitre saw for series production as well as for special applications The universal pivoting and tilting of both saw units allows cutting of high and wide profiles as well as every type of compound mitre. Consequently, many profiles can be cut without support blocks External-dimension cuts possible for all cutting variants. Consequently, no complicated length calculations are necessary. This is a big advantage when cutting special angles Pivoting range wi ...
Category: 109
item-No.: 122030333
Category: 103
item-No.: 125421662
Profile machining centre SBZ 130 Description 3-axis profile machining centre Designed for economical and efficient machining of aluminium, steel and stainless steel profiles All operations, such as routing, drilling and tapping are performed while the profile bar is stationary to protect the profile surfaces The on-board turret head ensures that tool changing times are kept very short, thereby optimising machining cycles The turret head can be equipped with eight tools or angle routing heads Automatic cl ...
Category: 105
item-No.: 120950798
Capacity round maximum diameter: 125 mm Angle degrees maximum: 90 Feeding length automatic feeder: 0 mm Diameter sawing blade: 380 mm SPECIFICATIONS Bandsaw / Circelblade / Automat Double circel blade Angle L / R Degrees  L + R Cutting capacity 90 ? Ø  125 mm blade dimensions  380 mm roller conveyor / push up / measuring 3000  Cutting speed M/min   2800 / 3800 M/min DIMENSIONS Length  4100 mm Width  1400 mm Height 1800 mm
Category: 103
item-No.: 125421650
Notching saw AKS 134/65, Graule ASP650 NC Machine is motorized 4 axis controlled and the saws diameter is 650x500mm Description High-performance notching saw for aluminium profiles offering an exceptionally large cutting range For demanding applications in the areas of curtain wall construction, conservatories and special designs Machining is performed with moving saw units while the profile is stationary, which ensures high accuracy and low space requirements Clamping of several profiles is possible due ...
Category: 109
item-No.: 119615695
Category: 100
item-No.: 125421646
Profile machining centre SBZ 140 Description 4-axis profile machining centre Designed for economical and efficient machining of aluminium and thin-walled steel profiles All operations, such as routing, drilling and tapping are performed while the profile bar is stationary to protect the profile surfaces Machining with all tools at angles continuously adjustable from 0° - 180° The on-board tool magazine ensures that tool changing times are kept short, thereby optimising machining cycles The magazine can ...
Category: 109
item-No.: 125832612
1992
8.200 €
-
Maximum cutting length: 6000 mm Maximum blade diameter: 420 mm 5 controlled axes (automatic positioning, direct input of the tilt and swivel angle) Pneumatic folding material support arm
You didn't find your wanted machine? send wanted inquiry to all dealers (no registration necessary)
more ELUMATEC types: