dry used for sale

Zinc melting tank make RAUCH type ZSB 453-RMasch. -No: 1351 built in 1997Technical specifications:Max. Melt content: 400 kgNet capacity: 350 kgMax. Melting temperature: 440 degreeBlank value at 420 degree: 0.8 kWExternal dimensions approx: 635 x 500 x 760 mmWeight approx. 230 kgPower consumptionWith- Control cabinet: 3.0 kW- for transporting and / or keeping warmxa0xa0 Die casting alloys with max. 5.0% Al- Melting of frozen material possibleused, in good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

Electric chamber furnace with silicon rod, make ELIOG VEB Römhild, type KO 14Fabr. -No: 85/11010012 built in 1985Technical specifications:Furnace interior dimensions H x W x D: 100 x 150 x 250 mmNominal temperature: 1350 °Nominal power: 4.0 kWHeating-up time 20 ° to 1350 °: 4.92 hours.Cooling time 1350 ° to 675 °: 2.25 hoursWeight of the oven approx: 82 kgExternal dimensions H x W x L: 440 x 475 x 595 mmWith- Thermoelectric transmitter and limit indicator- Control system L x W x H 600 x 460 x 700 mmusedPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

Gas-heated annealing and hardening furnace make SCHNEIDER GmbH Witten type 6 KMachine -No: 31 built in 2002Technical specifications:Chamber size W x D: 1200 x 900 mmin the rear part of the chamber step downwards: depth 500 x height 400 mmOpening W x H: 1200 x 470 mmmax.temperature: 1300 °Connected load: 300 kWHeating medium: natural gasExternal dimensions approx. W x D x H: 2200 x 2600 x 2650 mmWeight: 5850 kgWith- MEILI hand winch for opening the oven door- Attention without switch and control cabinet!usedPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

Vacuum drying oven Manufacturer A. Meier Ebfgo2r Small drying plant Built: 1988 B/h: abgel. 6700 hrs Control panel Siemens Chorus OP5 Kammerabm. approx. 760 x 900 x 400mm 400 V connection Device fully functional. The device was used after cleaning electronic circuit boards. Device is released due to operational resolution.

Kaeser TE 121 used machine volume flow: 12,7 m3/min pressure: 13 bar 1997 year

Many thanks for your interest in our machinery, please find below our offer: manufacturer: Walther Trowal Type: DLT4 drytunnel, incl. Belt electrical: 400V 50 Hz, 1,5kw dimensions: 2800x1100x1500mm (lxwxh) different: Belt width: 250mm, High 1100mm We offer this machine in 'as is' condition, without warranty ex Warehouse Hess. Lichtenau (EXW) unpacked

Mark used machine volume flow: 18 m3/min pressure: 13 bar 2014 year

A steam-powered freeze drying plant HOF with 1.8 m2 usable space. With stainless steel chamber door, ice capacitor, set of actuators (6 pcs.) sep. Panel.

Painting drying plant Giardina Forno Statico MOS 3D Masch. No. 050354 Built in 2006 User manual available This plant is in good condition, ready for operation. Changes, mistakes, intermediate sale reserved ! Service/spare parts by MATEC CH-4900 Langenthal/DE-79618 Rheinfelden MATEC system + technik GmbH Mechanical engineering Eisenbahnstrasse 25 CH-4900 Langenthal/Switzerland Tel. 0041 62 966 18 32 Fax 0041 62 966 21 12

Used fluid bed dryer made by Glatt, model WSG-60 - New: 1978. - All documents for the WSG are still available and filed in a folder. - The fluidized bed dryer works perfectly and has been upgraded with a modern frequency converter. - WSG is easy to regulate, which allows processing/drying of different products. - There are two boilers, each 240 liters. This allows one batch to be processed while preparing the next batch. - Nine filter bags, so it can be used for different products or when some filters need to be cleaned. - The machine is currently still connected. - Test of new user product possible. - The machine is being sold due to a company liquidation.

Conveyor for horde wagons or similar. Chain conveyor Total length approx. 25 m Feed infinitely adjustable

Part washer with basket Basket size: 630x450x300 Have 6 pcs Max part weight: 150 kg Cycle time: 6-15 min Machine parts: washer dryer evaporator cooler (with water or with air) With solvent regenerator Dimension: 5300x1800x3200 Weight:4400 kg Power: 118 kW Washing room capacity: 290 l

The "floor" of the dryer cooler consists of a nationwide, often special ventilation hopper system with downstream forced discharge. Depending on the customer application and products, this hopper system is additionally created with anumable fixtures. The roof-shaped design prevents the products from flowing freely. The filling and emptying of the cooler can be carried out continuously, fully automatically or in set / circulation. The standard cooler dimensions are 3x3 m and up to 18 meters high, depending on the number of superstructures, depending on the customer's requirements. for maize, cereals, rice, granules and other free-flowing products

Continuous dryers, tunnel furnaces, tunnel dryers, drying ovens, belt dryers for example semi-automatic flocking system Manufacturer: The parts to be dried are transported in a railway integrated in the dryer. Dimensions outside Width: approx. 3,860 mm Length: approx. 9,260 mm Height: approx. 1465 mm + base 1250 mm Dimensions Inside: Height approx. 820 mm without suspension track Width: approx. 3,230 mm Length approx. 9,000 mm

Stock# U2408-1 Used stainless steel conical mixer-dryer by Hosokawa Micron type 3-VDC-22. Total volume 798 l, working volume 300 l. Drying chamber is rated full vacuum. Working temperature up to 80 C. Conical bottom is equipped with heating coil with total volume 46 l, designed for work on pressure 6 bar, at working temperature up to 130 C. Elipsoidal top has inspection manway with diameter 250 mm equipped with bolted lid. Top has heating coil with volume 7,4 l, designed for work on pressure 6 bar, and working temperture up to 130 C. Dryer has stainless steel unsupported mixing screw driven via gearbox and el. motor 1.5 kW. Rotating arm is designed in stainless steel and driven via gearbox and el motor 0.25 kW. All motors are in Ex design (EExeIIT4). Bottom central discharge via outlet with diameter 200 mm and pneumatically operated ball valve. Last time machine had been working in ph ...

Automatic pile feeder Heating cylinder with oil system Rotary knife for end sheet Table delivery Machine checked and cleaned, in good working conditions.

New washer/dryer Manafacture: Getinge Lancer Type GEW P 888-1 electrically heated, single-door version Goods to be laundered, glassware and parts of bottling plants Size of the chamber 805 x 770 x 805 mm (W x H x D) External dimensions 2,000 x 2,170 x 1,076 mm (W x H x D) Dimensions in disassembled state / min. clearance 2395 x 2100 x 1395 (W x H x D) Weight Approx. 1100 kg (without load) Housing wall stainless steel AISI 304 (1.4301), Ra < 0.9μm Frame AISI 304 stainless steel (1.4301), with adjustable feet. Single-door version with automatically operated vertical sliding glass door, for loading and unloading. • Loading area 900 mm • 2 independent washing levels GMP

Demonstration device, 24 months warranty, stock -Interior stainless steel (304 Stainless) -Outside powder-coated RAL 7035 -Temperature max. 300°C -Inside BxDxH 1000 x 500 x 860 mm -Outside BxDxH 1200 x 905 x 1200 mm -Content 420 liters, table top -Control panel in the socket -Omron E5CC controller -Digitaltimer -Overtemperature protection -Temperature accuracy +/- 9°C in an empty oven at a constant 300°C -3 shelves -Recirculation fan on the back -Speed control -Power 6.2 KW -Connection 400 V , 3 phased -incl. documentation, CE declaration This laboratory cabinet is available in complete stainless steel version in 60, 120, 220 and 420 liters immediately.

Granulate Dryer Piovan Model: DPM615 SN: 01318TD01 Device in good conditiom. Machine store in warehouse in Poland , 55-300 Środa Śląska If needed any additional photos or videos or if you are planning visit to check our equipment you are welcome. Possible transport organization, transport cost covered by buyer. Contact person: Michał Pienio Production Manager UAP-2 marketing2.legnicafaurecia.com FAURECIA Legnica Decorations Plant, Interior Systems 180 Gniewomierz 59-241 Legnickie Pole – Poland M +48660719841 Faurecia Legnica Decorations S.A. . with its registered office in Legnica, address: at Gniewomierz 180 street, 59-241 Legnickie Pole, entered into the register of entrepreneurs of the Polish Court Register kept by the District Court for Wrocław-Fabryczna in Wrocław, IX Commercial Division of the National Court Register, under the KRS No 0000874432, ...

Piovan dryer with feeder and grinder. Type DPA50, C5, SN: 03218MR42. Good condition. Machine warehouse in warehouse in Poland, 55-300 Środa Śląska If necessary, additional photos or videos or if you are planning a visit to check our equipment, we invite you. Possible organization of transport, the cost of transport covered by the buyer. Person: Michal Pienio Production Manager UAP-2 marketing2.legnicafaurecia.com FAURECIA Legnica Decoration Plant, Interior Furnishings 180 Gniewomierz 59-241 Legnickie Pole – Poland M+48660719841 Faurecia Legnica Decorations S.A. . Gniewomierz 180, 59-241 Legnickie Pole, entered into the Register of Entrepreneurs of the Court Register kept by the District Court for Wrocław-Fabryczna in Wrocław, IX Commercial Department of the National Court Register, under KRS number No. 0000874432, NIP 6912552442, share capital: PLN 2,560,00 ...

Used lab lyophilizer LyoQuest -55 ECO. YOM 2016. Available 2 pcs.

Used freeze drying lyophiliser made by Edwards. Used freeze drying unit with 8,4/6,72/5,04 m2 total shelf-surface for drying product in flasks 55 mm diameter and 100 mm hight. Technic based on the plant 5,04m2. 10/8/9/6 shelves 800x1050mm and one radiation shelf, shelf interdistances 75/94/125 mm. Shelf temperature -50/-48 C /+70 C. Ice capacity 100 kg. Ice condenser temperature -75 C. Chamber and ice condenser in details made of stainless steel 1.4541 / AISI 321. Two refrigeration system with two stage compressors and watercolled freon condenser, compressors DWM-Copeland, freon R502.

furnace 1200 Temperature range 10 - 1200C inner chamber dimensions 1x1x2m (possible various size) Auro door PLC Termička obrada metala, cementacija, kaljenje, poboljšanje, žarenje, otpuštanje, normalizacija, ispravljanje ručnom i hidrauličnom presom, plameno kaljenje Jamske peći sa zaštitnom atmosferom Za jamske peći sa zaštitnom atmosferom se koriste elektrootporni grejači i gasni gorionici. Mogu obavljati sledeće termičke obrade: Žarenje kaljenje otpuštanje poboljšanje rekristalizacija normalizacija Upoznavanje sa klasičnim i novim postupcima termičke obrade metalnih materijala kao što su odgrevanje, difuziono žarenje, heterogenizacija, rekristalizaciono žarenje, potpuno žarenje, meko žarenje, izotermalno žarenje, normalizacija, kaljenje sa i bez polimorfnog preobražaja, starenje i otpuštanje, sa posebnim osvrtom na postupke termohemijske obra ...

Various ovens 1.5x1.5x3m Temperature 100 - 500 Celsius Öfen für die Wärmebehandlung Metalle einfache Härtesysteme Härterei-Zubehör Glühöfen Umluftöfen zum Glühen, Anlassen Salzbadöfen Schutzgasöfen Nitrieröfen und Plasmanitrieröfen Mehrzweckkammer-ofenanlagen kontinuierliche Ofenanlagen Vakuumprozesse Vakuumhärten Vakuumglühen, -anlassen, Nitrieren Vakuumlöten Metal Injection Moulding Induktionserwärmung Öfen für die Kunststofftechnik zum Trocken, Tempern, Polymerisieren, Einbrennen usw.; Ausführung als Kammeröfen, Haubenöfen, Herdwagenöfen, Schachtöfen; Herdwagen-Schmiedeöfen Umluftöfen Kammerofenlinien Nitrieröfen Plasmanitrieröfen Vakuumprozesse Schmelzöfen Trocknen Tempern Laboröfen Ersatzteile Termička obrada Off-line oblast termička obrada uključuje sledeće: 1. Linija se sastoji od 3 komora peći za spheroidizing žare ...

Screw compressors, air dryers Fabr. Kaeser 1 piece type AS35, 22kW 1 piece type BS61, 37 kW 1 piece type BS 60 1 piece air dryer TC82 1 piece air dryer TE121 Price on request

Type: DAn06 max. operating pressure: 16 bar Capacity: approx. 420 m3/h For removing (drying) moisture from compressed (pressure) air

Used dryer Glatt WST 100/150. New 1997. Dismantled. No documentation. 2 pieces available.

Grain dryer approx. 12 tons

Wilo IL50/270-4/4-S1 glanded single pump 4000W pump 2060085/0810, 4kW, IL50 270-4/4-S1, centrifugal pump, 3~400/690 V, 50 Hz, DN50 PN16 Condition: unused item, but showing slight signs of storage (see pictures) EAN: 4016322797777 Manufacturer's specifications for technical data:Hydraulic dataMinimum Efficiency Index (MEI)0.4Minimum. Liquid temperature T min-20 °CMax. Liquid temperature T max140 °CMax. Ambient temperature T max40 °CMaximal operating pressure PN16 barNote on dimensioning16 bar to 120 °C, 13 bar to 140 °C Motor dataMains connection3~400 V, 50 HzVoltage tolerance±10 %Motor efficiency classIE3Nominal power P 24 kWBrated current I N8.2 ANominal speed n1450 1/minPower factor cos φ0.79Motor efficiency η M 50 %85.8 %Motor efficiency η M 75 %87.6 %Motor efficiency η M 100 %88 %Motor winding up to 3 kWMotor winding from 4 kW insulation classFSuity motorIP55 ...

Ribbin mixer/dryer,stainless steel,for powder/granulate,double jacket,variable speed.

Ribbin mixer/dryer,stainless steel,for powder/granulate,double jacket,variable speed.

Vac. drying cabinet,stainless steel,Heraeus type RVT 360,50-200°C.

Spray dryer nozzle head,stainless steel,Pasch Silkeborg TCR P 2052-1984

Spray dryer nozzle head,stainless steel,Pasch Silkeborg TCR P 2052-1984

Drying tunnel,stainless steel,Tinofix type 725

Pink VT 1650-850-1950-14 vacuum tray dryer for a total of 42 trays/inserts with the dimensions of 500 x 800 mm (3 per shelve), usable inner dimensions of the chamber 1710 x 985 x 1950 mm (WxDxH), outer dimensions of the chamber 1940 x 1200 x 2230 mm (WxDxH), 13 shelves with the usable dimensions of 1650 x 850 x 110 mm (WxDxH), total shelf area approx. 19,6 m2, total of 14 shelves including floor, heating medium hot water, heating of the trays/inserts, floor and ceiling, maximum temperature 95 °C, maximum operating pressure vacuum chamber -1/+0.1 bar, maximum operating pressure heating system 3 bar, unladen weight approx. 3700 kg, (2 units available)

Used batch fluid bed dryer made by GLATT, model: WSG-C 60 made of stainless steel with spray granulation. 1100 kg/day capacity 40 kW power installed Max. air capacity 6000 m3/h Max. Static pressure 12000 Pa New 1995. The device equipped with: - air filter - fan - control cabinet - piping - tun removable - full documentation - CE. EX.

Bouwman Pharma Plant Isolator with freeze-drying system Isolators are the safest method to ensure sterile conditions. In insulators, an evaporator in conjunction with a distribution system takes over the automated decontamination. Year of construction 1991 Weighing System - Weighing Range: 20-6000 gr Abm. Inside: ± W160 x D150 x H110 cm Item condition: used