1000 offers

maximum number of results exceeded > 1000
please refine your search

New in: used
Price: 2.000 €
Location: Land-nl NL Broek op Langedijk
Seller: BVA Auctions

Auction name: Bankruptcy A.T. Beukers B.V. (producer of wooden floors) in Broek op Langedijk Online auction Start of auction: 21 September 2018 17:00 GMT +0200 (Western Europe (DST) Closing time: 03 October 2018 16:00 GMT +0200 (Western Europe (DST) The price listed is an opening bid To participate in the auction and for more information go to: BVA-Auctions more

New in: used
Price: request quote
Location: Land-DE Germany, 47652 Weeze
Seller: Thünnesen GmbH

with hardened steel cone grinder, plastic housing\r\nspeed​​: 330 rpm, continuously adjustable from coarse to fine\r\ncapacity: flakes 250 g / min., Finely grinding about 220 g / min.\r\nall cereals and oilseeds, dry herbs and spices:\r\n more

New in: 1975
Price: 58.000 €
Location: Land-de DE Finnland
Seller: LM Dairy Consulting

A 2 101 1 MKT evaporator plant with high concentrator 1 MKT evaporator plant with 3 columns with staem injection compression to produce vacuum with a high concentrate plant from MKT with 2 columns manufacturer year 1975 inlet capacity is 10.000 litre per hour water evaporation is until to 9.100 litre/hour concentrate outlet is until to. 1.400 to 2.000 l/hour concentrate has until to 57% dry matter more details please look on page 3 MKT evaporatr equipment is: basement floor standing in front left side 3 water circulation pumps 5 concentrate pumps 1 density weighting plant 1 Grundvoss water circulation pump 1 tank, not insulated not double jacket standing on feet  ... more

New in: used
Price: request quote
Location: Land-DE Germany, 47652 Weeze
Seller: Thünnesen GmbH

include \r\nfeeding conveyor\r\nprecrusher\r\ntransportpneumatik\r\nswing-screen-dryer \r\nexhaustair-filterstation\r\nheating system/heat exchanger\r\nheat recovery \r\npipelines\r\nbreadcrumbmil\r\nbuffer silos\r\nswitch box/electrical panel\r\n more

New in: 2010
Price: request quote
Location: Land-de Germany, 50374 Erftstadt
Seller: Grafimex GmbH

Sheet size: 530 x 750 mm 55 million impressions Antistatic Ergotronic console DensiTronic SAPC plate change Ecomatic technological TRANS refrigeration Auto ink roller wash auto blanket wash auto impression cylinder wash Harris & Bruno coatin unit with chambered doctor blade system I/R dryer + hot air extended delivery Grafix powder-spray more

New in: used
Price: used machinery auction RESALE 90 €
Location: Land-de DE Germany, 47055 Duisburg
Seller: Surplex GmbH

Weight approx.: 235 kg Dimensions (l x w x h) approx.: 900 x 660 x 1350 mm Description: - Number: 14679 - 500 Hz, S max. 5.2 kVA, 3800 V, l max. 14 A, secondary IP 23 - for further details see pictures more

New in: 2002
Price: 19.500 €
Location: Land-de DE 33449 Langenberg, Neuzeller Straße 42
Seller: SN - InTec Ltd

used agricultural machines planers glue Binder-stack machine suitable for stacking of glue Binder It can also as one and off promotion for a mechanization of a planing plant be converted and completed Manufacturer: Minda industries Condition: used, dismantled Year of construction: 2002 Reference number: ATWE126 consisting of: Heavy conveyor belt drive Length: 18m Width (lenght): 0, 8 m Roll diameter: 160mm Drive: SEW 7, 5kW motor gearboxes All rolls powered Heavy conveyor belt with Abschiebebalken, stacking and lifting table Length: 18m Width (lenght): 0, 8 m Roll diameter: 160mm Drive: SEW 7, 5kW motor gearboxes All rolls powered Hydraulically powered lift table, st ... more

New in: 2002
Price: used machinery auction RESALE 500 €
Location: Land-it IT Italy, 12030 Marene
Seller: Surplex GmbH

Weight approx.: 800 kg Dimensions (l x w x h) approx.: 4000 x 2300 x 1400 mm Description: Max. machining width 1300 mm System with rod feed 2 Ultraviolet lamps - UV Safety standard CE mark Total installed power 39.5 Kw more

New in: used
Price: request quote
Location: Land-de DE 49808 Lingen, Marienstr. 6
Seller: EL-Maschinenbörse GmbH

Complete plant / stone fabrication Fabr. LOCKSMITH SV 400 for the production of H-block and full block stones Fabr. LOCKSMITH SV 400 ---------------------- Consisting of: -Mixing plant locksmith -Stone pavers locksmith SV 400 -Incl. 29 forms (full - and H-block) 11,5er, 17,5er, 24, 30, 36,5er, and 42,5er Sheet size: 1400 x 600 mm ------------------------- Complete circulation, consisting of: --------------------------------- -Hub Manager -Platform -Curing Chambers -Countersunk head -The bottling plant of hollow Chamber stones with styrofoam -Frothing device -Dry side with baling hooks -Chamber heating system more

New in: 2009
Price: used machinery auction RESALE 6.000 €
Location: Land-it IT Italy, 37136 Verona (VR)
Seller: Surplex GmbH

Weight approx.: 5000 kg Dimensions (l x w x h) approx.: 3500 x 6000 x 3600 mm Description: Serial number 2411. Power supply 400 V. Installed power 75 kW. Smokes and odours extraction. The machinery has been used in a foundry. SPECIAL TRANSPORT REQUIRED. See photo more

New in: 1995
Price: request quote
Location: Land-de DE Raum Freiburg
Seller: Alfred Feldmann Werkzeugmaschinen

Powder coating plant Manufacturer: GEMA, MORGENSTERN, OMT Washing System MORGENSTERN: YOM 1990 Water treatment system Morgenstern: YOM 1990 Drying oven Morgenstern: YOM 1990 Powder coating booth GEMA: YOM 1995 Fire suppression system Co2: YOM 1995 Powder enamelling furnaces OMT: heating medium gas Conveyor Kewesta: length 125 m Condition: very well maintained condition still in production, available from October/November 2018 Further technical data see pdf file more

New in: 1998
Price: used machinery auction RESALE 1.000 €
Location: Land-it IT Italy, 12030 Marene
Seller: Surplex GmbH

Weight approx.: 1740 kg Dimensions (l x w x h) approx.: 3200 x 2050 x 1450 mm Description: Max. working width 1300 mm WORKING UNITS Paint drying through nr. 3 ultra violet lamps Security norme CE mark Total installed power 37 Kw more

New in: 2009
Price: 310.000 €
Location: Land-pl PL 51-60 Wroc?aw, Handelsmana 18/1
Seller: TM Machinery

ref. F 102 Gallus EM 280 10 colour flexo, web width 280 mm, year 2009, 10x IST cold UV dryers, video control, Corona treatment, turn bar, in production, price: 310 000 EUR FCA more

New in: 2002
Price: used machinery auction RESALE 11.000 €
Location: Land-it IT Italy, 12030 Marene
Seller: Surplex GmbH

Weight approx.: 9338 kg Dimensions (l x w x h) approx.: 34000 x 1783 x 3024 mm Description: Max. machining width 1300 mm Max. machinable thickness 80 mm System with rod feed max. forward feed speed 14 m/min Infrared lamps - IR yes Linear oven warm air Safety standard CE mark yes Total installed power 77 Kw more

New in: 2004
Price: request quote
Location: Land-es ES 08036 Barcelona, Aribau 168
Seller: Inautex

MONFORTS AND TEPA SANFORIZER MACHINE, RUBBER WIDTH 1850 MM TEPA HIGH ENTRANCE WITH GUIDERS AND COMPENSATOR, YEAR 2004 STEAMING DRUM MONFORTS RUBBER BELT SHRINKING UNIT, RUBBER WIDTH 1850 MM, RUBBER THICKNESS 65 MM, YEAR 1990 TEPA PALMER, DIAMETER 2000 MM, STEAM HEATED, 2 BLANKET DRYEING CYLINDERS, YEAR 2004 TWO COOLING DRUMS EXIT WITH A-FRAME BATCHER MACHINE FULLY RENEWED IN 2004, ALL INVERTER DRIVE IN 2016 ALL BEARING WERE REPLACED MACHINE IN PERFECT CONDITION. STILL RUNNING ONE SPARE NEW BLANKET FOR THE PALMER MAINLY USED FOR COTTON DENIM more

New in: used
Price: used machinery auction RESALE 100 €
Location: Land-it IT Spain
Seller: Surplex GmbH

Weight approx.: 300 kg Dimensions (l x w x h) approx.: 1000 X 850 X 1050 mm Description: Serial Number 80s/0589004, Installed Power 2,2 kW, Max. Working pressure 10 bar, For further information see photos. more

New in: 2009
Price: request quote
Location: Land-de DE 23769 Fehmarn, Siedendörp 19
Seller: USED Machines

RYOBI 525 GX (5-D) Five colors + varnish year: 2009 32 million impr. PSO-certificated 520 x 375 mm Inline coating unit doctor blade system Grafix IR dryer PC h control unit with its online-connection PDS-E densitometer Ultra sound sensor for two sheet detector Pill lays control sensor dampening units automated plate changing blanket and inking roller washup device Non high-pile delivery with integrated stop Located Germany more

New in: 1996
Price: used machinery auction RESALE 1.000 €
Location: Land-it IT Italy, 12030 Marene (CN)
Seller: Surplex GmbH

Weight approx.: 1400 kg Dimensions (l x w x h) approx.: 4500 x 2400 x 2100 mm Description: PAINT DRYER with ultra violet lamps system Max working width 1350 mm Piece feeding through metal rods Adjusting in continuos feeding speed WORKING UNITS Paint drying through ultra violet lamps Control and program system MAGELIS Security norme CE mark more

New in: 1996
Price: request quote
Location: Land-de DE 69256 Mauer, Gerhard-Weiser-Ring 30 (Büro)
Seller: CARDA USED MACHINES

Name: Polymer processing plant Manufacturer: H.Kocken dosing systems Type: Polykompakt serie HTD 2,000 Year of construction: 1996 Carda-ID: D-0936 Material: PP Drive motor: approx. 2,1 kW Dimensions: L: 2700 mm x B: 1000 mm x h: 1700 mm Empty weight: 360 kg Speed: 920 Capacity: 2000 litres / h (Chamber 1 + 2 each: 670 L, Chamber 3: 670 L) Condition: Used Tech. Documentation: Yes, in German available Accessories: Control, dry material feeder. Comment: Product touching parts made of stainless steel or plastic more

New in: used
Price: used machinery auction RESALE 7.000 €
Location: Land-de DE Germany, 58455 Witten
Seller: Surplex GmbH

Weight approx.: 1 kg Dimensions (l x w x h) approx.: 0 x 0 x 0 mm Description: Reinforced concrete wire line consisting of: Overhead pay-off Type GSG 7 mtr. high Mechanical descaler Dry coating with frequency controled filter-exhausting - Single rolling stand with mechanical closing Die box Dual rolling stand with electrical closing HERBORN drawing block EG 60 d/n Pulling force 6 tons Drawing speed max. 8,0 m/s Block Ø 585 / 750 mm Wire inlet Ø max. 17,0 mm Wire finished Ø 4,0 - 12,0 mm Main motor 132 kW Documentation available HERBORN spooler SLB 1100 -tension controled, electronical adjusted -lay position and speed electronical controled -bobbins hydraulic lifted Size of bobbin Flange  ... more

New in: 2003
Price: request quote
Location: Land-de DE 40764 Langenfeld, Schneiderstrasse 10
Seller: Maschinenhandel Borowski GmbH

DEMAG Ergotech 80-420-200 system for sale warehouse no.: 502629 manufacturer: DEMAG Typ: ERGOtech 80-420-200 System Controller Unit: NC4 year of construction: 2003 operating hours: 34000 h Do you need one used DEMAG ERGOtech 80 / 420-200 system with only approx. 34,000 operating hours? On request, we can make you our non-binding offer. In order to ensure the functionality of the used injection molding machine, we will check the operation of the machine with the Sumitomo-Demag service. Afterwards, this machine will be repaired and can be inspect by you during dry-cycle test run. technical data: Clamping unit type of drive: fully hydraulically clamping type: fully hydraulic me ... more

New in: used
Price: used machinery auction RESALE 400 €
Location: Land-it IT Italy, 37136 Verona (VR)
Seller: Surplex GmbH

Weight approx.: 300 kg Dimensions (l x w x h) approx.: 1600 x 800 x 1100 mm Description: See photo more

New in: 2000
Price: request quote
Location: Land-de DE 40764 Langenfeld, Schneiderstrasse 10
Seller: Maschinenhandel Borowski GmbH

ENGEL ES 650-150 HL warehouse no.: 502566 manufacturer: ENGEL Typ: ES 650-150 HL Controller Unit: EC 100 year of construction: 2000 operating hours: 61835 h We are selling a tie-bar-less injection molding machine of the manufacturer ENGEL type ES 650-150 HL from the year of construction 2000. After the exact technical examination in our technical center in Langenfeld and the subsequent revision, the machine can be seen during test-run (dry-cycle run). technical data: Clamping unit type of drive: fully hydraulically clamping type: fully hydraulic method of construction: tie-bar-less clamping force: 1500 kN size of mould plates h: 820 mm size of mould plates v: 750 mm mi ... more

New in: 2008
Price: used machinery auction RESALE 10.000 €
Location: Land-it IT Spain
Seller: Surplex GmbH

Weight approx.: 2500 kg Dimensions (l x w x h) approx.: 5600 x 2100 x 1850 mm Description: Serial number MEDGE028060, UV Edgecoating machine with 2 UV coating heads of 220 mm diameter (UR Model) and 2 UV drying units (UFB Model), First unit with one drying lamp, second unit with 2 drying lamps, Min length 120 mm, Min width 120 mm, Thickness from 5 to 70 mm, Total power installed 15,1 kW, Working hours of lamps groups 200 h, CE Standards, For further information see photos. more

New in: 1988
Price: request quote
Location: Land-de DE 50933 Köln, Eupener Str. 135-137
Seller: PP Lion Trade e.K.

Roland 806-6 WL, 1988 Ref.Nr: 2557 Manufacturer Roland Model 806-6 WL year built: 1988 Max sheet size: 1000 x 1400 mm availability: immediately condition: good price: on technical request spezification: · Ink temperature control · Eltosch dryer system IR / HL dryer · 6-colour + varnishing · · Non stop feeder · Non stop delivery · RCI 2 ink remote control · Baldwin cooling devices · Quick action clamps for blankets · blanket washing device · rewind device for blanket washer · complete set of new scooter Â&mid ... more

New in: used
Price: used machinery auction RESALE 500 €
Location: Land-de DE Germany, 58455 Witten
Seller: Surplex GmbH

Weight approx.: 150 kg Dimensions (l x w x h) approx.: 1200 x 800 x 400 mm Description: One set of spare parts for drawing machine NIEHOFF M5 Mat. No.Nr./Order No. description new/used 511209 idler pulley IdNo. 208920.4 1 Stk 2220596/30 multi-plate ring IdNo. 111346-2 22 Stk/pieces 2220596/10 thrower ring IdNo. 184014-4, 2 Stk/pieces 1 piece 2220596/20 cover IdNo. 187707-4, 4 pieces/1 piece cover IdNo. 05358-4 1 piece fitting key IdNo. 102202-2 1 Stk ring IdNo. 205372-4 1 piece shaft L = 665 mm / repaired 1 piece shaft L = 950 mm / repaired 1 piece 2308873/50 draw taper shaft IdNo. 184012-4 1 piece pump 1 piece 533086 drawing taper 10-steps IdNo. 122559-5 4 pieces ground drawing tapers 4 pi ... more

New in: 1995
Price: request quote
Location: Land-de DE Baden Württemberg
Seller: METEC GmbH

Part washer part washer Manufacturer: LPW Type: TRA 570/ 530 x 160 / 8 Year of construction: 1995 Medium: Water Cubic capacity: 1.94 meters Heating capacity dryer: 24 kW Heating power other baths: 30 kW Throughput: every 30 seconds. 1 basket Basket size: 600 x 600 mm Dimensions of the system: approx. 2.5 m x 9 m more

New in: 2003
Price: used machinery auction RESALE 800 €
Location: Land-de DE Germany, 71686 Remseck a.N.
Seller: Surplex GmbH

Weight approx.: 200 kg Dimensions (l x w x h) approx.: 800 x 600 x 1600 mm Description: KAESER DC47E Air Dryer more

New in: 2004
Price: 80.000 €
Location: Land-pl PL 51-60 Wroc?aw, Handelsmana 18/1
Seller: TM Machinery

ref. 526 Adast Dominant 757 P Format 52z74 cm, year 2004, perfecting 1-4, Superblue, Technotrans, automatic ink rollers washers, semiautomatic plate chnge, IR dryer, Technotrans Alpha D, in production, price: 80 000 EUR FCA more

New in: 1992
Price: used machinery auction RESALE 9.800 €
Location: Land-nl NL Netherlands, 5384TB Heesch
Seller: Surplex GmbH

Weight approx.: 15000 kg Dimensions (l x w x h) approx.: 7400 x 1900 x 2400 mm Description: Serial number 23508, spraying unit: screw diameter 60 mm, dosing path 260 mm, screw speed 5 to 210 rpm, flow rate 51 g/s, injection flow 280 g/s, injection flow with increased injection pressure 240 g/s, max. swept volume 735 cm³, max. injection weight 661 g, specific injection pressure 1500 bar, specific injection pressure increased 1700 bar, nozzle path 350 mm, nozzle press force 96 kN, heat output 21,3 kW, 5 heating zones, closing unit: closing force 2750 kN, locking force 3025 kN, opening path 600 mm, ejector force 70 kN, tool installation height max. 560 mm, min. 200 mm, clamping plates total si ... more

New in: used
Price: 45.000 €
Location: Land-de DE Lindau-28
Seller: Troostwijk Auctions

2K injection molding machine (Ma 5); clamping force 1.000 kN; opening force 270 kN; opening stroke 400 mm; mould height I min. 250 - max. 550 mm; mould height II min. 450 - max. 750 mm; tie bar diameter 70 mm; distance between tiebars (hxv) 460 x 460 mm; ejector stroke 120 mm; injection unit 60; screw Ø aggregate 1 18 mm; screw Ø aggregate 2 16 mm; screw stroke 100 mm; stroke volume max. 25,4 cm³; shot weight 24,4 g; injection velocity max. 770 mm / s; screw speed max. 630 rpm; heating capacity 5,7 kW; dimensions approx (lxwxh) 5.350 x 1.836 x 1.955 mm; weight approx 8.600 kg; drive power 30 kW; control DSP4; technical documentation; protective housing; without dry modules; without temper ... more

New in: used
Price: request quote
Location: Land-de Germany, 32469 Petershagen
Seller: Bödeker Holzbearbeitungsmaschinen GmbH

Manufacturer: Berkmann Spritzraum mit Zuluft und Abdunstraum, Dry splashback: yes, Stem underfloor mm: no, Zink coated casing: yes, Fibre glas filter: yes, Compl. incl. radial fan: yes, Power of fan kW: 5, Exhaust air m³/h: 7000/3000, Pumpe kW Leistung: 0,5 (für Heizregister, incl. supply air cover: yes, Working widht max mm: 4000 X 2000, Exhaust air diameter mm: 400 X 400, incl. supply air cover: yes, Damper register - items: 1, Exhaust air m³/h: 7000/3000, Fresh air m³/h: 7000, Damper register - items: 1, Exhaust air m³/h: 7000/3000, Fresh air m³/h: 7000, FREE TEXT: Maschine besteht Zuluftdecke/ Abdunstdecke/Filterbox mit 5,0 Kw/Abdunstventilator/Umwälzpumpe/Weic ... more

New in: 2011
Price: 45.000 €
Location: Land-de DE Lindau-21
Seller: Troostwijk Auctions

2K injection molding machine (Ma 4); clamping force 1.000 kN; opening force 270 kN; opening stroke 400 mm; mould height I min. 250 - max. 550 mm; mould height II min. 450 - max. 750 mm; tie bar diameter 70 mm; distance between tiebars (hxv) 460 x 460 mm; ejector stroke 120 mm; injection unit 60; screw Ø aggregate 1 18 mm; screw Ø aggregate 2 16 mm; screw stroke 100 mm; stroke volume max. 25,4 cm³; shot weight 24,4 g; injection velocity max. 770 mm / s; screw speed max. 630 rpm; heating capacity 5,7 kW; dimensions approx (lxwxh) 5.350 x 1.836 x 1.955 mm; weight approx 8.600 kg; drive power 30 kW; control DSP4; technical documentation; protective housing; without dry modules; without temper ... more

New in: 2005
Price: used machinery auction RESALE 21.000 €
Location: Land-es ES Spain, 28890 Loeches
Seller: Surplex GmbH

Weight approx.: 11000 kg Dimensions (l x w x h) approx.: 25000 x 4500 x 3500 mm Description: Consisting in: 1 driven roller conveyor 2000 x 1500 mm SUPERFICI E83V20 1 driven belt conveyor 3500 x 1500 mm SUPERFICI TT1/35 1 cleaning brush machine SUPERFICI SISAL-1, maximum workpiece height approx. 160 mm, with blowers, brush, blowers 1 driven roller conveyor 1450 x 1500 mm with lamp 1 automatic spraying machine SUPERFICI TWIN SPRAY ACQUA, maximum workpiece height approx. 130 mm, tunnel length 1900 mm, useful working width 1500 mm, 2 heads with 2 application guns each 1 vertical dryer SUPERFICI CONTIVERT ETC1-7-7500 with 7 levels with dimensions 7250 x 1500 mm 1 driven belt conveyor SUPERFICI T ... more

New in: 2014
Price: request quote
Location: Land-de DE
Seller: IDS Trade GmbH

Pttmoa Drying plant Manufacturer: Plastic systems Year: 2014 more

New in: used
Price: used machinery auction RESALE 250 €
Location: Land-de DE Germany, 88422 Oggelshausen
Seller: Surplex GmbH

Weight approx.: 35 kg Dimensions (l x w x h) approx.: 800x600x900 mm Description: NILFISK GWD 300 s Extraction & Comminution with internal pump for water more

New in: 1998
Price: request quote
Location: Land-de DE
Seller: IDS Trade GmbH

Machine with handling, conveyor belt and protective enclosure. Dryer is not included! Grua0ip Year of construction 1998 Dialogica control Hours of operation: lt 6000 STD display - conversion was however reset due to a CPU. Last stand before the conversion 42000 STD (2016) more

New in: 1991
Price: used machinery auction RESALE 600 €
Location: Land-de DE Germany, 71679 Asperg
Seller: Surplex GmbH

Weight approx.: 700 kg Dimensions (l x w x h) approx.: 1000 x 1000 x 2650 mm Description: - Dry separator/extraction system more

New in: 2004
Price: request quote
Location: Land-es ES 08036 Barcelona, Aribau 168
Seller: Inautex

TEPA DENIM FINISHING RANGE, WASHING, DESIZING, MERCERIZING AND DRYING, ROLLER WIDTH 2000 MM COMPRISING: - FITE SINGE, 2 BURNERS - TEPA YEAR 2004 DESIZING TANK (ALSO USED FOR MERCERIZING), 5 TN PADDER - OXIDATION ZONE - 2 TEPA WASHING TANKS YEAR 2004, WITH 10 TN PADDER - TVE -ESCALE WASHING TANK HIGH PERFORMACE, MODEL SHARK WITH 2 VACUUM SLOTS - 3 BOWL IMPREGNATION PADDER - MAHLO WEFT STRAIGHTENER, TO GIVE "TWIST" TO THE DENIM. WITH VACUUM SLOT - DRUM DRYER: 16 DRUMS, DIAMETER 600 MM - EXIT BY A-FRAME BATCHER more

New in: 1998
Price: used machinery auction RESALE 300 €
Location: Land-de DE Germany, 71679 Asperg
Seller: Surplex GmbH

Weight approx.: 400 kg Dimensions (l x w x h) approx.: 1100 x 900 x 2720 mm Description: - Air filter/dry separator - The height of 2720 mm can be reduced to 2200 mm for the transport by removing the cover! more

New in: 1979
Price: request quote
Location: Land-de DE 71263 Weil der Stadt, Bachstr. 6
Seller: Altmann Graphische Maschinen GmbH

max. size 32 x 46 cm age 1979 single sheet feeder Varn KOMPAC film dampening quick plate clamping bar dry sprayer + version (with gear) imprinting unit with numbering and perforating device shown totalizer: approx. 63 mill. impressions Delivery time: immediately from stock Ref: HE180305A Please ask for price. We ship and install worldwide! more

New in: 1985
Price: used machinery auction RESALE 100 €
Location: Land-de DE Germany, 58455 Witten
Seller: Surplex GmbH

Weight approx.: 200 kg Dimensions (l x w x h) approx.: 1300 x 400 x 1200 mm Description: Cable dryer Product Ø 1 - 25 mm Speed up to 1500 m/min Voltage 440V, 6 A, 50 Hz Motor capacity 1,1 kW more

New in: used
Price: request quote
Location: Land-ae AE 0 Ajman, Ajman Free Zone
Seller: American Traders

Reggiani 1996-2200mm 12 colours of which 12 are currently all in use. Gas fired, 5 chamber dryer. 3 Pass tensionless entry by Testa Kalin brushing. E & L centralising Dogal roller. Complete with 2 sets of squeegees 1.8 and 2.4. Take off by batcher. Termoelettronica Colour Kitchen Print Paste, Year 2001 Termoelettronica colour kitchen for print paste, 2 stations plc controls CT-401, with Maino Paternosta and Zanzattori paste mixing included. Stentex Stenter Range, 2400mm ww, Year 1996 Stentex multi layer Stenter frame, high entry with Bianco scroll rollers, Beta 3 bowl Padder 2400 mm, Bianco weft straightener type Digitex E+L guiders  ... more

New in: used
Price: used machinery auction RESALE 3.000 €
Location: Land-it IT Italy, 38030 Soraga
Seller: Surplex GmbH

Weight approx.: 3000 kg Dimensions (l x w x h) approx.: 5600 x 2600 x 3000 mm Description: See pictures more

New in: 2003
Price: request quote
Location: Land-de DE 82152 Planegg, Semmelweisstrasse, 8
Seller: Seemüller Grafische Maschinen GmbH

15,000 s / h, autoplate, Alcolor, CP 2000 non stop feeder, non stop delivery,. Technotrans refrig., rollers washer by CP2000, blanket + impression cyl. by CP2000, SEPARATED COATING UNIT, DryStar 2000 Zag, eltex ionizing blow., EXTENDED DELIVERY, Grafix Alphatronic more

New in: 2005
Price: used machinery auction RESALE 1.800 €
Location: Land-de DE Germany, 40764 Langenfeld
Seller: Surplex GmbH

Weight approx.: 350 kg Dimensions (l x w x h) approx.: 3000 x 1500 x 2000 mm Description: Compressor BOGE C 9, total mileage 1648 h, refrigerant dryer HANKISON HHD 81, YOM 2005, pressure vessel MABE MB 030120, test pressure: 15.73 bar, YOM 2005, contents 1000 l, see photos for details more

New in: used
Price: request quote
Location: Land-de DE 76877 Offenbach / Queich, Interpark 8
Seller: Minox Maschinenhandels GmbH

Material: product contact areas in stainless steel; Volume: 3000 ltr. Drive: 75 KW; more

New in: 1998
Price: used machinery auction RESALE 900 €
Location: Land-de DE Germany, 07356 Bad Lobenstein
Seller: Surplex GmbH

Weight approx.: 2000 kg stations: 2 Dimensions (l x w x h) approx.: 3760x2050x3000 mm total power requirement: 30 kW Diameter of wash-basket: 450x300x200 mm Description: MOC DANNER S 60.GF-D/K2 Cleaning Machine The cleaning machine is for washing and drying metal parts (with integrated rotary drum. Loading and disloading will be done manually. The equipment can be used with solvents or solvent conglomerates with flashoint equal or greater than 40°C. more

New in: 1995
Price: 34.000 €
Location: Land-de DE 09120 Chemnitz,
Seller: MAB

Complete joinery for sale. Planer thickness (SCM) Set up Martin T 53 Long tape loop SAMCo Bandsaw METABO Construction circular saw electric Beckum Scroll saw Thicknesser SCM Wood Turning Lathe Format saw Martin T 72 Format saw SCM SI 16 2 workbenches 2 slot mortisers Schneider pneumatic system with dryer Frame press POLZER 2 bench drills hacker Weima WL5 Grinding table Extraction system for the machines, only in the packet for sale from mid-October more

New in: 2000
Price: used machinery auction RESALE 12.000 €
Location: Land-it IT Italy, region Varese
Seller: Surplex GmbH

Weight approx.: 4000 kg Dimensions (l x w x h) approx.: 6000 x 3500 x 3300 mm Description: Serial number 03516467. Installed power 13 kW. Operating width 1300 mm. With ESA VT 150 W control. Automatic spraying machine for straight or shaped panels. Possibility of painting all 4 sides of the panel. Feeding belt with variable speed and auto-cleaning system and paints recycling. Feeding speed ariable up to 10 mt/min. Smoke and dust dry cleaning system with cleaning filters. 2 motorized arms with 4+4 guns each one. Guns manually adjustable depending on the size or shape of workpiece. Photocell-based system for the detection of input workpiece operating width, in order to avoid waste of paint whil ... more

You didn't find your wanted machine? send wanted inquiry to all dealers (no registration necessary)
more types: