dry laminating used for sale

Centrifuge New brand: GESTER, model: CG-1200V. Shaft length: 1.2 m and axis diameter: 0.5 cm. Engine: 50 hp at 3000 rpm. Pneumatic piston for cleaning on top. Electrical panel with triangle star.

Output: 20t/h, with Burner Weishaupt WM-GL 20 3-A, fuel: oil, natural gas, year of construction: 2018, various elements were renewed in 2018.

An electric drying oven. Operating temperature: 50°C-250°C, usable space: 2.6m³, heating connection values: 18kW, motors: 0.74kW. On-site inspection is possible.

Squeezer Engine: 172 Kw. With electrical panel.

Without accessories, spare parts and documentation, was maintained regularly, was running one-shift.

For melting and curing powder-coated parts, as well as drying and baking painted parts, max. charge weight: 500kg, operating temperature: 100-320°C, calorific value: 10kWh/m³, heating capacity: 90kW, internal dimensions: 2500x1200x1850mm, volume: 5.55m³, connected load: 8.075kW, length: 3800mm, width: 2700mm, height: 3100mm, with instruction manual, without spare parts or accessories.

Inner dimensions: 2100x1200x1800mm, temperature: 30-300°C, heating power: 45kW, motor power: 3kW, length: 2750mm, width: 1900mm, height: 2600mm, with documentation, can be opened from both sides, an inspection is possible.

Two identical drying ovens are available, max. temperature: 300°C, external dimensions: 827x895x816mm, internal dimensions: 503x554x644mm, weight: 100kg, on-site inspection is possible.

Feed rate: 5-25m/min.

System consists of four CTT 300 and three TT 100, capacity: 4x 200/ 3x 100l, connected load: 1.6kW.

Hopper capacity: 600l, connected load: 17kW, length: 820mm, width: 820mm, height: 2455mm, weight: 490kg.

Circumferential speed: 80m/s, an on-site inspection is possible.

A WUMAG TEXROLL cylinder dryer for drying and stretching. Drums: 6 pieces, drum diameter: 560mm, TÜV-tested. Roller width: 3000mm, fabric width: 2800mm. Heating: Steam-heated. Including: Tidland braking system, Montalvo tension measurement, hydraulic outlet tension system.

Max. working pressure: 16bar, ambient temperature: 3-50°C.

Air pressure: 0.1-1.2Mpa, air pressure: 60°C, weight: 450kg.

Operational pressure: 16bar, Leistung: 5,7kW.

There are two Adsorption Dryer MD 200 available, year of construction machine 1/ 2: 2017/ 1998.

Volume flow: 470m³/h, operational overpressure: 7-16bar, coolant: 407c, connected load: 1.48kW.

Volume flow: 186m³/h, temperature: -10 to 120°C.

Coolant: R 22, charge: 2.5t, operational pressure: 13bar, was maintained by the manufacturer.

- Producer Finnrose - Type Cooling - Year of construction 2001 - Working width 1.300 mm - Working height ~ 900 + - 20 mm - Max. part height ~ 100 mm - Cooling dryer 2.000 mm - Roller transportsystem - Roller diameter 60 mm - Roller pitch 100 mm - Length conveyor 3.000 mm - Length 3.000 mm - Colour 7035 - Location, in stock - Voltage fluctuation max. +/- 5 % - Without switch cabinet

Volume flow: 21.6m³/min, operating overpressure: 7bar, length: 1100mm, width: 1028mm, height: 1829mm, weight: 1.275t, with documentation, an on-site inspection is possible.

Operational pressure: 43bar, connected load: 2.1kW, weight: 185kg, was maintained regularly, an inspection is possible.

There are two identical drying cabinets available, nominal temperature: 200°C, power: 2000W.

Length: 1750mm, width: 1675mm, with documentation.

- Producer Cefla/Sorbini - Type Ecolight - Year of construction 1998 - Working width 1.300 mm - Working height 870 + - 20 mm - Max. part height ~ 70 mm - Number of lamp from top 1 Stk. - Lamp straight to conveyor 1 Stk. - For mercury lamps - For gallium lamps - Length cross bar conveyor - Cross-bar pitch ~ 95 mm - Feed speed adjustable 5 - 25 m/min - Length 1.500 mm + 500 mm - Voltage / HZ 400 /50 - Elektrischer Total connection 12,56 kW - Voltage fluctuation max. +/- 5 %

Max. power: 4000W, max. compressed air supply: 6ar, with Conveying System APS/ALS and Chiller Hyfra LWK 31/1-S.

Max. nominal temperature: 200°C, internal dimensions: 371x415x345mm, capacity: 53l, max. load: 40kg, volume flow: 1-30m³/h, connected load: 1.7kW, length: 744mm, width: 630mm, height: 576mm, weight: 82kg, with documentation and vacuum pump, an on-site inspection is possible, has been maintained regularly

- Producer Giardina - Type GST 1400/2 - Year of construction 1997 - Working width 1300 mm - Number of lamp from top 2 Stk. - Lamp straight to conveyor - For mercury lamps - For gallium lamps - Electic capacity lamp 80 W/cm - Installation length 3000 mm - Location - Voltage fluctuation max. +/- 5 %

- Producer Venjakob / Superfici - Type TU166-30 + 2 UVM55 - Year of construction 1997 - Working width 1300 mm - Number of lamp from top 2 Stk. - Lamp bevel to conveyor - For mercury lamps - For gallium lamps - Electic capacity lamp 80 W/cm - Selective shiftable 80/40 W/cm - Feed speed infinitely adjustable by hand wheel ~ 2 - 7,5 m/min - Location - Voltage / HZ 400 / 50 - Commodity code 8419 3200

- Producer Elmag Superfici - Working width 1300 mm - Number of lamp from top 2 Stk. - Lamp straight to conveyor 2 Stk. - For mercury lamps - For gallium lamps - Electic capacity lamp 80 W/cm - Selective shiftable 80 / 40 W/cm - Feed speed infinitely adjustable by hand wheel ~ 2 - 7,5 m/min - Location - Voltage / HZ 400 / 50 - Commodity code 8419 3200

- Producer Venjakob - Year of construction 2001 - Working width 1300 mm - Max. part height ~ 120 mm - Length of flash off tunnel 5500 mm - Supply air exhauster - Exhaust pipe 355 mm - Roller transportsystem - Roller diameter 80 mm - Roller pitch 150 mm - Length conveyor 5500 mm - Feed speed infinitely adjustable 2 - 10 m/min - Colour 7035 - Location, in stock - Voltage / HZ 400 / 50 - Voltage fluctuation max. +/- 5 % - Ohne Stellventile und Wasserpumpen

This dryer from Colortronic is in machine storage at Plastima Used Machinery. The dryer is from 1981 and is in used condition. – Brand : Colortronic – Model: CTT 122 – Construction year: 1991 – Working Hours: Unknown

- Producer Cefla/Sorbini - Type UV 2000 M2 / TTE2500 - Year of construction 2007 - Working width 1.300 mm (1.445) mm - Working height 900 + - 40 mm - Max. part height 70 mm - Operationside right - Number of lamp from top 2 Stk. - Lamp straight to conveyor 2 Stk. - For mercury lamps - For gallium lamps - Electic capacity lamp max. 120 W/cm - Electic capacity lamp infinitely variable - Length cross bar conveyor - Cross-bar pitch ~ 115 mm - Length 2.500 mm - Width 2.300 mm - Height 1.500 mm - Voltage / HZ 400 /50 - Elektrischer Total connection 86 A / 36,4 kW - Voltage fluctuation max. +/- 5 %

- Producer Venjakob - Type VEN DRY OIR 38/40 - Year of construction 2013 - Working width 1.300 mm - Working height 940 + - 20 mm - Length of flash off tunnel 3.800 mm - Fresh air 100 m³/h - Exit air ~ 500 - 1000 m³/h - Circulation air ~ 3.000 m³/h - Drying temperature ~ 30 Grad - Air speed 0,5 - 2 m/s - IR-tube emitter 12 Stk. - Power IR tube emitter 12 x 1,5 kW - Transport belttransport - Length 4.000 mm - Location, in stock - Voltage / HZ 400/50 - Voltage fluctuation max. +/- 5 % - control cabinet with Touch-Screen mit neuer Siemens Steuerung 1 Stk.

racks: 17; support tube spacing: 60mm; rack length: 650mm; langth: 200 - 2000mm; rolls: Polyamid 4 Stück; depth: 870 - 1180mm; height: 198mm; safe load: 400kg; The user-friendly Varioflex drying rack is a space-saving and gentle solution for storing painted workpieces. The four swivel castors mean that it can also be used for transporting workpieces. Its solid tube frame design can be adjusted between 200 mm and 2,000 mm. With 17 inside and outside plastic-coated support tubes on each side, the rack can support up to 400 kg of evenly distributed weight. The plug-in inside and outside support tubes can be taken out and re-inserted as needed. When not in use, the drying rack can be collapsed and takes up minimal space.

Ref. 444_2 BASF nyloprint Dryer for Nyloprint plates Serial: 263 35 + 80° Functioning

Used small continuous dryer For drying sheet materials. Width approx. 0.80 m, length approx. 1.60 m Dimensions: Width c. 1.10 m, length 1.75 m, height c. 1.70 m Heating with Leister hot air unit up to 160°C with uniform outlet on dry material through perforated plate. Can be moved on wheels. Swivel control box. For an additional cost spray bridge as shown.

MARK adsorption dryer ADS 27 S -40 230 V, Used SPECIFICATIONS Effective flow rate 2,700 l/min Max. operating pressure 14 bar Standard dew point -40 °C Air outlet 1 inch Dimensions: 620x401x1285 mm Weight 99 kg

Manufacturer: Henny Penny Type: HC-934 External dimensions: 460 x 620 x 550 mm. 230V / 0.8kW. Three drawers. Digital timer. Heating methods: Mode A: 74°C Mode B: 85°C

- Producer Elmag Superfici - Type TU 166 - Year of construction 2001 - Working width 1300 mm - Number of lamp from top 2 Stk. - Lamp straight to conveyor 2 Stk. - For mercury lamps - For gallium lamps - Electic capacity lamp 80 W/cm - Selective shiftable - Length cross bar conveyor - Feed speed infinitely adjustable by hand wheel ~ 2 - 7,5 m/min - Voltage / HZ 400 / 50 - Commodity code 8419 3200

- Producer Elmag Superfici - Type TU 166 - Year of construction 1997 - Working width 1300 mm - Operationside right - Number of lamp from top 2 Stk. - Lamp straight to conveyor 2 Stk. - For mercury lamps - For gallium lamps - Selective shiftable - Feed speed infinitely adjustable by hand wheel ~ 2 - 7,5 m/min - Length 6.000 mm - Location - Voltage / HZ 400 / 50 - Commodity code 8419 3200

Trocker in retrofit version and with new Siemes S7-1200 control cabinet with touch panel. - Producer Cefla - Year of construction 1999/2022 - Working width 1.300 mm - Number of pallets 5 Stk. - Palettenlänge 7.470 mm - Useable pallet length 7.200 mm - Max. part height ~ 50 mm - Clearance height between the pallet 60 mm - Max. part length 7.200 mm - Fresh air 3.000 - 9.000 m³/h - Exit air 3.000 - 9.000 m³/h - Heat output ~ 45 kW - Drying temperature 30 Grad (optional 60) Grad - Incl. heat exchanger - Feed speed infinitely adjustable 2 - 10 m/min - Suitably for water based lacquer - Suitably for solvent based lacquer - Length 9.600 mm - Width 3.300 mm - Height 2.650 mm + 900 mm - Location, in stock - Voltage / HZ 400 / 50 - Voltage fluctuation max. +/- 5 % - With switch cabinet - Ohne Stellventile und Wasserpumpen

verfügbar ab ca. 09-2023 - Producer Elmag Superfici - Type ETC-3/2-5500 - Year of construction 2003 - Working width 1.300 mm - Number of pallets 50 Stk. - Max. part height ~100 mm - Clearance height between the pallet 120 mm - Measure: middle pallet - middle pallet 3.800 mm - Max. part length 5.200 mm - Number of adjustable temperature zone 2 Stk. - Fresh air 9.000 m³/h - Heat output max. 2 x 45.000 kcal/53 kW - Drying temperature ~ 55 - 60 Grad - Incl. heat exchanger - Throughput in u-shape - Infeed side left - Feed speed infinitely adjustable 2 - 10 m/min - Suitably for water based lacquer - Suitably for solvent based lacquer - Length 7.400 mm - Width 6.510 mm - Height 5.745 mm - Location, not in stock ab 09-2023 - Voltage / HZ 400 / 50 - Voltage fluctuation max. +/- 5 % - Ohne Stellventile und Wasserpumpen

Silo plant with dryer and cleaning Complete

COLD JET DRY ICE BLASTING MACHINE COLD JET MODEL 2000 DRY ICE BLASTER GOOD CONDITION EXWORKS HAMBURG GERMANY VOLTS 230 AMPS 4 PHASE 1 FREQUENCY 50/60 FULL LOAD AMPS 4 MOTOR AMPS 2.5 HP 1 SHORT CIRCUIT INTERUPTING CAPACITY 300A MAX OPERATING PRESSURE 300 PSI / 20.7 BAR SHIPPING WEIGHT 315 LB / 143 KGS

Granulate Dryer Drywell DW080 Model: DW080.E10N0.00NW SN:17W74/8010 Device in good condition. On stock available few more units model DW050 and DW080. Please check manufacturer site: Kanitech Machine store in warehouse in Poland , 55-300 Środa Śląska If needed any additional photos or videos or if you are planning visit to check our equipment you are welcome. Possible transport organization, transport cost covered by buyer. Contact person: Michał Pienio Production Manager UAP-2 marketing2.legnicafaurecia.com FAURECIA Legnica Decorations Plant, Interior Systems 180 Gniewomierz 59-241 Legnickie Pole – Poland M +48660719841 Faurecia Legnica Decorations S.A. . with its registered office in Legnica, address: at Gniewomierz 180 street, 59-241 Legnickie Pole, entered into the register of entrepreneurs of the Polish Court Register kept by the District  ...

Granulate Dryer Drywell DW050 Model: DW5019W5/10763 Devices in good condition. Price for each device 5000 euro On stock available few more units model DW050 and DW080 Please check manufacturer site: Kanitech Machine store in warehouse in Poland , 55-300 Środa Śląska If needed any additional photos or videos or if you are planning visit to check our equipment you are welcome. Possible transport organization, transport cost covered by buyer. Contact person: Michał Pienio Production Manager UAP-2 marketing2.legnicafaurecia.com FAURECIA Legnica Decorations Plant, Interior Systems 180 Gniewomierz 59-241 Legnickie Pole – Poland M +48660719841 Faurecia Legnica Decorations S.A. . with its registered office in Legnica, address: at Gniewomierz 180 street, 59-241 Legnickie Pole, entered into F3660932 the register of entrepreneurs of the Polish Court Regist ...

with light barriers in the infeed area, the dryer only switches on when parts are detected by the light barrier, otherwise the dryer is in energy-saving standby mode with almost closed mirror halves. The cooling fan is frequency controlled and is controlled by temperature sensors. Operation via a Siemens panel. - Producer Venjakob - Type VEN DRY UV Surround - Year of construction 2012 - Standby operation % - Working width 1.300 mm - Operationside left - Number of lamp from top 1 Stk. - For mercury lamps - For edge drying - Electic capacity lamp 120 W/cm - Electic capacity lamp infinitely variable 50 - 120 W/cm - Length belt conveyor - Fan, exhaust air regalbar bis max. 3.200 m³/h - Feed speed adjustable 2,5 - 7,5 m/min - Length 2.000 mm - Width 2.700 mm - Total connection power ~ 22 kW - Location - Voltage / HZ 400/50

- Producer Venjakob - Type VEN DRY RZG - Working width 1300 mm - Max. part height 80 mm - Length of flash off tunnel 5000 mm - Volume flow air 5000 m³/h - Heat output 82 kW - Drying temperature 45 Grad - Incl. heat exchanger 90/70 Grad - Transport belttransport 5.200 mm - Location, in stock - Voltage / HZ 400 / 50