dry laminating used for sale

Type: DAn06 max. operating pressure: 16 bar Capacity: approx. 420 m3/h For removing (drying) moisture from compressed (pressure) air

Used dryer Glatt WST 100/150. New 1997. Dismantled. No documentation. 2 pieces available.

Ribbin mixer/dryer,stainless steel,for powder/granulate,double jacket,variable speed.

Ribbin mixer/dryer,stainless steel,for powder/granulate,double jacket,variable speed.

Vac. drying cabinet,stainless steel,Heraeus type RVT 360,50-200°C.

Spray dryer nozzle head,stainless steel,Pasch Silkeborg TCR P 2052-1984

Spray dryer nozzle head,stainless steel,Pasch Silkeborg TCR P 2052-1984

Drying tunnel,stainless steel,Tinofix type 725

Pink VT 1650-850-1950-14 vacuum tray dryer for a total of 42 trays/inserts with the dimensions of 500 x 800 mm (3 per shelve), usable inner dimensions of the chamber 1710 x 985 x 1950 mm (WxDxH), outer dimensions of the chamber 1940 x 1200 x 2230 mm (WxDxH), 13 shelves with the usable dimensions of 1650 x 850 x 110 mm (WxDxH), total shelf area approx. 19,6 m2, total of 14 shelves including floor, heating medium hot water, heating of the trays/inserts, floor and ceiling, maximum temperature 95 °C, maximum operating pressure vacuum chamber -1/+0.1 bar, maximum operating pressure heating system 3 bar, unladen weight approx. 3700 kg, (2 units available)

Used batch fluid bed dryer made by GLATT, model: WSG-C 60 made of stainless steel with spray granulation. 1100 kg/day capacity 40 kW power installed Max. air capacity 6000 m3/h Max. Static pressure 12000 Pa New 1995. The device equipped with: - air filter - fan - control cabinet - piping - tun removable - full documentation - CE. EX.

Bouwman Pharma Plant Isolator with freeze-drying system Isolators are the safest method to ensure sterile conditions. In insulators, an evaporator in conjunction with a distribution system takes over the automated decontamination. Year of construction 1991 Weighing System - Weighing Range: 20-6000 gr Abm. Inside: ± W160 x D150 x H110 cm Item condition: used

Stock # U2352-4 Used stainless steel lab size mobile fluid bed dryer by Glatt model GPCG-1. Working volume of drying chamber up to 4.5 l. Operating pressure 0.79 bar. Machine is equipped with two stainless steel cones - one for coating process, second for drying. Coating cone is also equipped with 4 stainless steel screens. Nozzle not included. Electric power supply for heating 4 kW. Working temperature range from 10 up to 140 C. Dryer is equipped with centrifugal fan driven by el. motor 2.2 kW, 2850 rpm, 220-230/380-400 V, 50 hz. Compressed air - pressure 6 bar.

Used lab spray dryer Buchi B-290 Power consumption: max. 2900 W Connection voltage: 200 – 230 V ± 10 % Frequency: 50/60 Hz Environmental conditions: for indoor use only Temperature: 5 – 40 °C Altitude: up to 2000 m Humidity: maximum relative humidity 80% for temperatures up to 31°C decreasing linearly to 50% relative humidity at 40°C Evaporating capacity: 1.0 l/h H2O, higher for organic solvents Airflow: max. of 35 m3/h Motor control: Frequency converter Max. temperature input: 220 °C Heating capacity: 2300 W Heating control: PT-100, fuzzy logic, control accuracy ± 2 °C Interface: Serial port RS-232 for all parameters Spray gas: Compressed air or nitrogen / 200 – 800 l/h, 5 – 8 bar Nozzle tip diameter: 0.7 mm standard, other sizes 1.4 and 2.0 mm available Possible particle diameter range: 1 – 25 µm Mean residence time: 1.0 – 1.5 sec. Pollution deg ...

USED STAINLESS STEEL SPROUT-WALDRON 10 DRYER REF.: C6846 General characteristics: Manufactured by SPROUT-WALDRON Model 10 Material Stainless steel Weight 510 kg Motor characteristics: Rotational speed 910 rpm

inlet wire diameter 6,5 mm finished wire diamter 1,6 mm number of drafts 8 diameter of capstan 550 mm and 650 mm speed -meters/sek 8-12

Air dryer technical data: Working pressure, bar 17 Maximum pressure, bar 22 Operating temperature, ° C 36 Power, kW 5,45 The amount of charge, kg 3,97

USED INGERSOLL RAND NON-CYCLING REFRIGERATED AIR DRYER

Refrigerant dryer Kaeser TA 5 YOC 2013 Location: 59425 Unna The article is welcome to be viewed. It is possible to expertly inspect the items for sale on site. Specific questions should be clarified in advance. The information, such as technical data, dimensions, year of construction, condition are non-binding and have been shown to the best of our knowledge and belief. Errors are therefore reserved. The warranty/guarantee is excluded. The goods are sold from the location / warehouse, with the transfer of risk to the buyer there, this also applies to a shipment on our part, which we have carried out on your behalf. This offer is only aimed at traders, traders and legal entities. Company names and trademarks are the property of their respective owners and are used only to identify and describe the products. The assembly and the electrical connection of the machine / devi ...

Air dryer suitable for 7,5kW compressors. Designed for use with Aflatek Screw10A and Screw10A-200 compressors. Technical data: Air Flow 1.5 m3 / min Dew Point 2 - 10 °C Inlet/Outlet diameter G-1'' Power 0,6 kW Matched Air Compressor power kW 7,5 Weight 45 kg Inlet temperature 45 °C Presure 0,8 Mpa Cooler R 134 Current 3 A Size 730x420x720 mm -Price is with VAT 21% included. Contact us if you need a VAT free offer. -For shipping costs contact us directly.