dry laminating used for sale

Rotary vane vacuum & compressor - dry running Manufacturer: Becker Type: DVT 3.140 and DVT 3.100 Engine: 400V DS Suction power: 100-140 m ³/h Discharge pressure / vacuum: Optional +-0.5 bar / +-1 bar / +-1.5 bar Status: Demo Warranty: 12 months; ready for operation

Combination of suction Sweeper and wet scrubbing machine with 4 cyl. Kubota diesel engine, infinitely variable hydrostatic travel drive, automatic functions. Max working width 1270 mm, high emptying. Solid technology from a brand manufacturer, ideal for indoor and outdoor areas! 2 x available: Year 2006 / 220 h and year 2005 / 1020 h More Sweepers on stock - information, photos and special offers on request!

A single drum dryer for the production of powdered milk.

Apple pomace drying as a precursor for pectin production at albi Berghülen Capacity: up to 1.5 tons of pomace per hour, built in 1977 and 1992 Manufacturer: Kunz AG, Dintikon CH Function The apple coming from the winery became damp pomace with a transport screw into a pomace transport system open at the top transported diagonally upwards, and then via a further transport screw, D= 600 mm in the all-round running round drying chamber, D = 360 mm, L = 11,400 mm. With an internally welded bucket in the drying chamber, the still damp pomace moves intensively with the hot air. At the same time, a gas burner flame and the furnace blow the hot gases into the drying chamber. Length burner and oven together: 6,500 mm The pomace waste, which is dried and crushed at the same time, is processed by an ejection chamber located directly at the end of the drying chamber with a t ...

Manufacturer: Güntner Medium: Water glycol 70 / 30% Medium temperature: 90º occurs C.Austritt 70 ºc. Cooling capacity: 2500kW air temperature: 30 ° C. (entrance) Fans: 10 units, 2, 8kW, 400V, 50 Hz, 3 wire Connection: Entrance 3xDN100, exit 3xDN100 Dimensions: Lxwxh = 12. 000x2300x1500mm Weight: 2700kg Sound pressure level: 63 dB(A) 10 m distance, year of manufacture: 2007 Condition: Very good, check tightness and fans. ORC (Organic Rankine cycle) ORC cycle

Cold regenerating adsorption dryer make SPX HANKISON type HHL 200Ser. -No: 347434-1204-2200 Year 2004minute / Max. Ambient temperature: +2 / + 45 °minute / Max. Inlet temperature: +2 / + 50 °Flow rate (based on + 20 ° compressed airsuction temperature and 1 bar absolute): 200 m³ / h.Pressure dew point at operating overpressure: -40 °minute / Max. Operating pressure: 5.0 / 16 barCompressed air connection: R 1Setting value Pressure switch Tank Pressure min.:0,91 bar ON: 0.7 bar OFFAdsorbent: activated aluminaContainer capacity: 93 lFilling weight per pressure vessel: 70 kgDimensions approx. W x D x H: 1150 x 750 x 1980 mmWeight approx: 310 kgWith- Level 1 controlused, in very good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our ...

Technical data: -Operating temperature adjustable from 80 ° to 300 ° -Interior dimensions approx. B H 1000 x 1200 X 900 mm -mot. Small parts conveyor for feeding with small parts -Utility room 0.88 m³ -Total steam room 1.99 m ³ -Exhaust volume 85 m³/h -maximum amount of solvent 22 Gr. / per batch -Door opening B 1000 x H 1100 mm -Opening flap in the door approx. B 750 x H 270 mm -Power heater 24 kW -Power Fan 4.45 kW -Space requirement approx. B H 2000 x 2900 m. fan x T 1800 mm -Weight approx. 2000 kg -Control settings with or without timer min / hrs / day -Timer -controlled temperature preselection -Temperature display -Emergency - of - buttons

Material: product contact areas in stainless steel; Volume: 3000 ltr. Drive: 75 KW;

Carestream DryView 6850 (laser printer) The sale is to resellers or distributors despite full functionality without warranty as "Used", EXW Freiberg, Saxony, Germany. You buy the equipments in "as in" condition from stock Freiberg (EXW), Saxony, Germany, and prepayment. The system is located in our warehouse in Freiberg / Germany. It is packed on pallets, properly lashed and wrapped with stretch film and can be picked up immediately.

Zinc melting tank make RAUCH type ZSB 453-RMasch. -No: 1351 built in 1997Technical specifications:Max. Melt content: 400 kgNet capacity: 350 kgMax. Melting temperature: 440 degreeBlank value at 420 degree: 0.8 kWExternal dimensions approx: 635 x 500 x 760 mmWeight approx. 230 kgPower consumptionWith- Control cabinet: 3.0 kW- for transporting and / or keeping warmxa0xa0 Die casting alloys with max. 5.0% Al- Melting of frozen material possibleused, in good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

Electric chamber furnace with silicon rod, make ELIOG VEB Römhild, type KO 14Fabr. -No: 85/11010012 built in 1985Technical specifications:Furnace interior dimensions H x W x D: 100 x 150 x 250 mmNominal temperature: 1350 °Nominal power: 4.0 kWHeating-up time 20 ° to 1350 °: 4.92 hours.Cooling time 1350 ° to 675 °: 2.25 hoursWeight of the oven approx: 82 kgExternal dimensions H x W x L: 440 x 475 x 595 mmWith- Thermoelectric transmitter and limit indicator- Control system L x W x H 600 x 460 x 700 mmusedPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

Gas-heated annealing and hardening furnace make SCHNEIDER GmbH Witten type 6 KMachine -No: 31 built in 2002Technical specifications:Chamber size W x D: 1200 x 900 mmin the rear part of the chamber step downwards: depth 500 x height 400 mmOpening W x H: 1200 x 470 mmmax.temperature: 1300 °Connected load: 300 kWHeating medium: natural gasExternal dimensions approx. W x D x H: 2200 x 2600 x 2650 mmWeight: 5850 kgWith- MEILI hand winch for opening the oven door- Attention without switch and control cabinet!usedPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

Machine type: Dry air dryer for plastics Make: Somos R40 Color: Yellow Control type: 230V, 50Hz Dry air volume: 40m3/h Heating capacity Dry air: 4.5kW Heating capacity regeneration: 4.5kW Power: 0.4kW Total closing value: 4.9kW Additional information: recirculation cooler 1.8m2, max. temp. 130°C 3x1,1kW additional heating, 3x hand valve, incl. limit switch for air regulation - completely overhauled with 1 year warranty (except consumables) Location: Germany 3 x 25l GRP funnel on mobile frame Dimensions: 220x80x210 (=LxWxH in cm) Weight: 200kg

Vacuum drying oven Manufacturer A. Meier Ebfgo2r Small drying plant Built: 1988 B/h: abgel. 6700 hrs Control panel Siemens Chorus OP5 Kammerabm. approx. 760 x 900 x 400mm 400 V connection Device fully functional. The device was used after cleaning electronic circuit boards. Device is released due to operational resolution.

Drying oven, curring oven chanel, chamber with fans Working temperature: 130 C° Max temperature: 200 C° 2 chamber Chamber 30 m3 Open size : 90x120 cm Heating capacity 110 kW 72 heating elements

Kaeser TE 121 used machine volume flow: 12,7 m3/min pressure: 13 bar 1997 year

Mark used machine volume flow: 18 m3/min pressure: 13 bar 2014 year

Hobart 305 GTP Dry Steam Fast Cooker Gentle, healthy cooking: steaming, steaming or blanching 3 different pressure levels 0 / 0.5 / 1 bar for individual adaptation to the food Extremely short cooking times Individual temperature program as standard: 50° - 99°C Electronically controlled program sequences Compact tabletop unit with built-in steam generator 1 cooking chamber for 3 x 1/1 GN up to max. 65 mm deep or 2 x 1/1 GN up to max. 100 mm depth or 1 x 1/1 GN up to max. 200 mm depth Multi-setting, the connection value can be reduced to 18.2 kW with hot water connection (power then approx. 550 servings/h) Automatic defrosting Water level controller with display Fully electronic control for time input Self-diagnosis with fault display Chamber pressure is displayed digitally Evaporation destruction with built-in wras condensation Automatic boiler emptying with drain pump a ...

Many thanks for your interest in our machinery, please find below our offer: manufacturer: Walther Trowal Type: DLT4 drytunnel, incl. Belt electrical: 400V 50 Hz, 1,5kw dimensions: 2800x1100x1500mm (lxwxh) different: Belt width: 250mm, High 1100mm We offer this machine in 'as is' condition, without warranty ex Warehouse Hess. Lichtenau (EXW) unpacked

Electrolux T4250 Tumble dryer 13.9 kg Services and benefits • High productivity – two feeds per hour • Low energy consumption for optimum efficiency • Easy operation due to preselection of temperature and time • Large door opening for easy loading and unloading • Large, self-cleaning lint screen for easy maintenance • Door suspension optionally left or right for optimal workflows • Easy access to important parts from the front and back for easy maintenance • Selecta microprocessor control - 2 auto-stop programs for extra dry and dry - 5 to 9 tailor-made programs for every drying need - Accurate temperature control for unmatched drying accuracy - Anti-wrinkle cycle to avoid wrinkles when the dryer is not discharged - Error codes for easy troubleshooting - High contrast display - Coin counter operation • Service program for the adjustment of parameter ...

A steam-powered freeze drying plant HOF with 1.8 m2 usable space. With stainless steel chamber door, ice capacitor, set of actuators (6 pcs.) sep. Panel.

Used fluid bed dryer made by Glatt, model WSG-60 - New: 1978. - All documents for the WSG are still available and filed in a folder. - The fluidized bed dryer works perfectly and has been upgraded with a modern frequency converter. - WSG is easy to regulate, which allows processing/drying of different products. - There are two boilers, each 240 liters. This allows one batch to be processed while preparing the next batch. - Nine filter bags, so it can be used for different products or when some filters need to be cleaned. - The machine is currently still connected. - Test of new user product possible. - The machine is being sold due to a company liquidation.

Veneer Press Dryer Manufactured by BABCOCK Model: BDI420/12 Working Width: 4200 mm N. of Heated Sections: 6

Abac used machine volume flow: 21 m3/min pressure: 13 bar

Painting drying plant Giardina Forno Statico MOS 3D Masch. No. 050354 Built in 2006 User manual available This plant is in good condition, ready for operation. Changes, mistakes, intermediate sale reserved ! Service/spare parts by MATEC CH-4900 Langenthal/DE-79618 Rheinfelden MATEC system + technik GmbH Mechanical engineering Eisenbahnstrasse 25 CH-4900 Langenthal/Switzerland Tel. 0041 62 966 18 32 Fax 0041 62 966 21 12

SOMOS Dry Air DryEr TF40 with integrated material conveying + MC1 control for plastic granules Overhauled: January 2020 Colour: Tuerkis Dry air quantity: 40m3/h Heating capacity dry air: 4.5 kW Drive power: 0.5 kW Total closing value: 5.0 kW Dimensions dryer + hopper: 95x66x230 (LxWxH in cm) - with reduction of support Weight Dryer: 165kg Additional: - 100l GRP drying hopper insulated on an integrated frame - Lid for separators available - Incl. dried material conveying automatically to the machine - hopper filling according to customer requirements; with conveyor or hand-filled Completely overhauled in 2019 with 1 year warranty, except wear parts Location: Germany Total dimensions: 110x512x220 (LxWxH in cm) without conveyor pipe removal Weight: 100kg Funnel filling and spare parts package up ...

Conveyor for horde wagons or similar. Chain conveyor Total length approx. 25 m Feed infinitely adjustable

PROFROID FCTE 90 20 MDB AC V2 Brand:PROFROID Type:FCTE 90 20 MDB AC V2 Stock number:M23-3321 Cooling capacity:1,838 kW Application:Cooling Number of fans:20 Refrigerant:Water / Glycol Refrigerant Content:458 kg Voltage:400 Volts Motor power:20x 1,85 kW Dimensions:11470 x 2200 x 2500 mm Weight:4,100 kg Year:2x 2016 / 1x 2018 Number in stock:3 piece(s) Price: Quotation request Description: Very young and nice V-Block dry coolers with 20 fans. Two coolers are from 2016 and one cooler from 2018. The cooler from 2018 is equipped with water spraying system (adiabatic cooling), so it has more power (± 2400 kW). Mentioned capacity at a water temperature of +45/40°C and an ambient temperature of +30°C and 34% Glycol. Visit our website: used-refrigeration

Stock# U2408-1 Used stainless steel conical mixer-dryer by Hosokawa Micron type 3-VDC-22. Total volume 798 l, working volume 300 l. Drying chamber is rated full vacuum. Working temperature up to 80 C. Conical bottom is equipped with heating coil with total volume 46 l, designed for work on pressure 6 bar, at working temperature up to 130 C. Elipsoidal top has inspection manway with diameter 250 mm equipped with bolted lid. Top has heating coil with volume 7,4 l, designed for work on pressure 6 bar, and working temperture up to 130 C. Dryer has stainless steel unsupported mixing screw driven via gearbox and el. motor 1.5 kW. Rotating arm is designed in stainless steel and driven via gearbox and el motor 0.25 kW. All motors are in Ex design (EExeIIT4). Bottom central discharge via outlet with diameter 200 mm and pneumatically operated ball valve. Last time machine had been working in ph ...

Part washer with basket Basket size: 630x450x300 Have 6 pcs Max part weight: 150 kg Cycle time: 6-15 min Machine parts: washer dryer evaporator cooler (with water or with air) With solvent regenerator Dimension: 5300x1800x3200 Weight:4400 kg Power: 118 kW Washing room capacity: 290 l

The "floor" of the dryer cooler consists of a nationwide, often special ventilation hopper system with downstream forced discharge. Depending on the customer application and products, this hopper system is additionally created with anumable fixtures. The roof-shaped design prevents the products from flowing freely. The filling and emptying of the cooler can be carried out continuously, fully automatically or in set / circulation. The standard cooler dimensions are 3x3 m and up to 18 meters high, depending on the number of superstructures, depending on the customer's requirements. for maize, cereals, rice, granules and other free-flowing products

Continuous dryers, tunnel furnaces, tunnel dryers, drying ovens, belt dryers for example semi-automatic flocking system Manufacturer: The parts to be dried are transported in a railway integrated in the dryer. Dimensions outside Width: approx. 3,860 mm Length: approx. 9,260 mm Height: approx. 1465 mm + base 1250 mm Dimensions Inside: Height approx. 820 mm without suspension track Width: approx. 3,230 mm Length approx. 9,000 mm

Dry ice cleaner with only 108 operating hours and flexible use of all types of dry ice ColdJet SDI 60 Select ice blasting machine from 2013 With blasting hose, blasting gun (applicator in industrial design with lighting), grounding cable, round nozzle 11mm and flat nozzle 45mm with integrated 3-stage scambler Power supply: 230Volt maximum dry ice capacity of the container approx. 27kg Dry ice consumption adjustable from approx. 0 to 160kg per hour Jet pressure range from approx. 1.4 bar to 17 bar Compressed air requirement depends on the nozzle used The gun with integrated light and the ability to switch between only air and air + ice is very practical The device can be used with 3mm dry ice pellets, or alternatively with ice blocks, discs and nuggets, in which case the required ice is scraped off. So you can flexibly use any available dry ice. Instruction manual in English ...

New washer/dryer Manafacture: Getinge Lancer Type GEW P 888-1 electrically heated, single-door version Goods to be laundered, glassware and parts of bottling plants Size of the chamber 805 x 770 x 805 mm (W x H x D) External dimensions 2,000 x 2,170 x 1,076 mm (W x H x D) Dimensions in disassembled state / min. clearance 2395 x 2100 x 1395 (W x H x D) Weight Approx. 1100 kg (without load) Housing wall stainless steel AISI 304 (1.4301), Ra < 0.9μm Frame AISI 304 stainless steel (1.4301), with adjustable feet. Single-door version with automatically operated vertical sliding glass door, for loading and unloading. • Loading area 900 mm • 2 independent washing levels GMP

Dry steam cleaner with only 208 operating hours Menikini Steam Master dry steam unit from 2015 With hose and spray nozzle Power supply 400Volt, CEE 32A Power: 19.5kW Heating time approx. 7 minutes Operating pressure approx. 10 bar Boiler temperature approx. 180 degrees 16 liter stainless steel kettle Water tank for steam generation 25 litres Detergent tank 5 litres A cleaning agent can be added to the spray nozzle in addition to the steam. The device is suitable for continuous operation. Industrial version in stainless steel Well suited for cleaning and hygienizing surfaces, e.g. in industry and the food industry. Dimensions approx. 950 x 490 x 1000mm (LxWxH). Weight approx. 120kg. The machine can be demonstrated on site by appointment. We only offer machines that are ready for demonstration in our warehouse, see "other offers from this supplier".

No. 28 Dry air dryer D900 with MC1 - funnel individ. can be combined Somos D900 with MC1 control for plastic granules Completely overhauled: January 2020 with 1 year warranty except wear parts Colour: Turquoise blue Dry air quantity: 900m3/h Heating capacity dry air: 36 kW Heating capacity regeneration: 13.5kW Drive power: 4.4 kW Total closing value: 53.9 kW Dimensions: 110x100x191 (LxWxH in cm) Weight: 780kg Additional information: On request also combinable with funnel: 100l, 200l, 400l, 600l Dimensions: 110x150x210 cm (LxDxH) Weight: 780kg

No. 17 Dry air dryer D200 + 230V controller + 4x200l VA funnel + 4xZus.Hzg Somos D200 for plastic granules with 230V electr. Controller Completely overhauled: January 2020 with 1 year warranty except wear parts Dry air quantity: 200m3/h Heating capacity dry air: 8.1 kW Heating capacity regeneration: 8.1 kW Drive power: 0.9 kW Total closing value: 17.1 kW Dimensions: 83x90x191 (LxWxH in cm) Weight: 370kg Additional information: 4x200l VA Colortronik Funnel 4xAdditional heating 4xSuction box On a common frame

No. 15 Dry air dryer D200 with 230V controller + 1x600l funnel Colortronik Somos D200 for plastic granules with Electr. Controller 230V Completely overhauled: January 2020 with 1 year warranty except wear parts Dry air quantity: 200m3/h Heating capacity dry air: 8.1 kW Heating capacity regeneration: 8.1 kW Drive power: 0.9 kW Total closing value: 17.1 kW Dimensions: 83x90x191 (LxWxH in cm) Weight: 370kg Additional information: 1x 600l VA funnel by Colortronik Funnel insulated incl. cleaning opening and sight glass

Granulate Dryer Piovan Model: DPM615 SN: 01318TD01 Device in good conditiom. Machine store in warehouse in Poland , 55-300 Środa Śląska If needed any additional photos or videos or if you are planning visit to check our equipment you are welcome. Possible transport organization, transport cost covered by buyer. Contact person: Michał Pienio Production Manager UAP-2 marketing2.legnicafaurecia.com FAURECIA Legnica Decorations Plant, Interior Systems 180 Gniewomierz 59-241 Legnickie Pole – Poland M +48660719841 Faurecia Legnica Decorations S.A. . with its registered office in Legnica, address: at Gniewomierz 180 street, 59-241 Legnickie Pole, entered into the register of entrepreneurs of the Polish Court Register kept by the District Court for Wrocław-Fabryczna in Wrocław, IX Commercial Division of the National Court Register, under the KRS No 0000874432, ...

Piovan dryer with feeder and grinder. Type DPA50, C5, SN: 03218MR42. Good condition. Machine warehouse in warehouse in Poland, 55-300 Środa Śląska If necessary, additional photos or videos or if you are planning a visit to check our equipment, we invite you. Possible organization of transport, the cost of transport covered by the buyer. Person: Michal Pienio Production Manager UAP-2 marketing2.legnicafaurecia.com FAURECIA Legnica Decoration Plant, Interior Furnishings 180 Gniewomierz 59-241 Legnickie Pole – Poland M+48660719841 Faurecia Legnica Decorations S.A. . Gniewomierz 180, 59-241 Legnickie Pole, entered into the Register of Entrepreneurs of the Court Register kept by the District Court for Wrocław-Fabryczna in Wrocław, IX Commercial Department of the National Court Register, under KRS number No. 0000874432, NIP 6912552442, share capital: PLN 2,560,00 ...

Dryer from Wittman, model DRYMAX D60-100/100-M, SN:136410. Good technical condition. Machine warehouse in warehouse in Poland, 55-300 Środa Śląska If necessary, additional photos or videos or if you are planning a visit to check our equipment, we invite you. Possible organization of transport, the cost of transport covered by the buyer. Person: Michal Pienio Production Manager UAP-2 marketing2.legnicafaurecia.com FAURECIA Legnica Decoration Plant, Interior Furnishings 180 Gniewomierz 59-241 Legnickie Pole – Poland M+48660719841 Faurecia Legnica Decorations S.A. . Gniewomierz 180, 59-241 Legnickie Pole, entered into the Register of Entrepreneurs of the Court Register kept by the District Court for Wrocław-Fabryczna in Wrocław, IX Commercial Department of the National Court Register, under KRS number No. 0000874432, NIP 6912552442, share capital: PLN 2,560,00 ...

Demonstration device, 24 months warranty, stock -Interior stainless steel (304 Stainless) -Outside powder-coated RAL 7035 -Temperature max. 300°C -Inside BxDxH 1000 x 500 x 860 mm -Outside BxDxH 1200 x 905 x 1200 mm -Content 420 liters, table top -Control panel in the socket -Omron E5CC controller -Digitaltimer -Overtemperature protection -Temperature accuracy +/- 9°C in an empty oven at a constant 300°C -3 shelves -Recirculation fan on the back -Speed control -Power 6.2 KW -Connection 400 V , 3 phased -incl. documentation, CE declaration This laboratory cabinet is available in complete stainless steel version in 60, 120, 220 and 420 liters immediately.

Dryer from Wittman, model Drymax 180. Good technical condition. Machine warehouse in warehouse in Poland, 55-300 Środa Śląska If necessary, additional photos or videos or if you are planning a visit to check our equipment, we invite you. Possible organization of transport, the cost of transport covered by the buyer. Person: Michal Pienio Production Manager UAP-2 marketing2.legnicafaurecia.com FAURECIA Legnica Decoration Plant, Interior Furnishings 180 Gniewomierz 59-241 Legnickie Pole – Poland M+48660719841 Faurecia Legnica Decorations S.A. . Gniewomierz 180, 59-241 Legnickie Pole, entered into the Register of Entrepreneurs of the Court Register kept by the District Court for Wrocław-Fabryczna in Wrocław, IX Commercial Department of the National Court Register, under KRS number No. 0000874432, NIP 6912552442, share capital: PLN 2,560,000.00 (paid in full).  ...

Used lab lyophilizer LyoQuest -55 ECO. YOM 2016. Available 2 pcs.

Used freeze drying lyophiliser made by Edwards. Used freeze drying unit with 8,4/6,72/5,04 m2 total shelf-surface for drying product in flasks 55 mm diameter and 100 mm hight. Technic based on the plant 5,04m2. 10/8/9/6 shelves 800x1050mm and one radiation shelf, shelf interdistances 75/94/125 mm. Shelf temperature -50/-48 C /+70 C. Ice capacity 100 kg. Ice condenser temperature -75 C. Chamber and ice condenser in details made of stainless steel 1.4541 / AISI 321. Two refrigeration system with two stage compressors and watercolled freon condenser, compressors DWM-Copeland, freon R502.

furnace 1200 Temperature range 10 - 1200C inner chamber dimensions 1x1x2m (possible various size) Auro door PLC Termička obrada metala, cementacija, kaljenje, poboljšanje, žarenje, otpuštanje, normalizacija, ispravljanje ručnom i hidrauličnom presom, plameno kaljenje Jamske peći sa zaštitnom atmosferom Za jamske peći sa zaštitnom atmosferom se koriste elektrootporni grejači i gasni gorionici. Mogu obavljati sledeće termičke obrade: Žarenje kaljenje otpuštanje poboljšanje rekristalizacija normalizacija Upoznavanje sa klasičnim i novim postupcima termičke obrade metalnih materijala kao što su odgrevanje, difuziono žarenje, heterogenizacija, rekristalizaciono žarenje, potpuno žarenje, meko žarenje, izotermalno žarenje, normalizacija, kaljenje sa i bez polimorfnog preobražaja, starenje i otpuštanje, sa posebnim osvrtom na postupke termohemijske obra ...

Various ovens 1.5x1.5x3m Temperature 100 - 500 Celsius Öfen für die Wärmebehandlung Metalle einfache Härtesysteme Härterei-Zubehör Glühöfen Umluftöfen zum Glühen, Anlassen Salzbadöfen Schutzgasöfen Nitrieröfen und Plasmanitrieröfen Mehrzweckkammer-ofenanlagen kontinuierliche Ofenanlagen Vakuumprozesse Vakuumhärten Vakuumglühen, -anlassen, Nitrieren Vakuumlöten Metal Injection Moulding Induktionserwärmung Öfen für die Kunststofftechnik zum Trocken, Tempern, Polymerisieren, Einbrennen usw.; Ausführung als Kammeröfen, Haubenöfen, Herdwagenöfen, Schachtöfen; Herdwagen-Schmiedeöfen Umluftöfen Kammerofenlinien Nitrieröfen Plasmanitrieröfen Vakuumprozesse Schmelzöfen Trocknen Tempern Laboröfen Ersatzteile Termička obrada Off-line oblast termička obrada uključuje sledeće: 1. Linija se sastoji od 3 komora peći za spheroidizing žare ...

Grain dryer approx. 12 tons

ATLAS COPCO FX 7 refrigeration dryer was built in 2014. This reliable, cost-effective and easy-to-use device effectively dries compressed air of oil, moisture and water vapour, eliminating the risk of the formation an oily deposit which is dangerous for pipes and pneumatic tools. The ATLAS COPCO compressed air dryer is distinguished by its capacity of 3000 l/min, low compressed air consumption and a pressure dew point of +3°C, guaranteeing clean and dry air throughout its service life. The total weight of the device is 44 kg. Technical parameters of the ATLAS COPCO FX 7 refrigeration dryer - working pressure: 13 bar - pressure dew point: 3°C - capacity: 3000 l/min - pressure drop: 0.38 bar - connection: 1″ - maximum ambient temperature: 43°C - power: 1 kW - power supply: 230 V; 50 Hz - dimensions (L x W x H): 500 x 370 x 804 mm - weight of device: 44 kg

Wilo IL50/270-4/4-S1 glanded single pump 4000W pump 2060085/0810, 4kW, IL50 270-4/4-S1, centrifugal pump, 3~400/690 V, 50 Hz, DN50 PN16 Condition: unused item, but showing slight signs of storage (see pictures) EAN: 4016322797777 Manufacturer's specifications for technical data:Hydraulic dataMinimum Efficiency Index (MEI)0.4Minimum. Liquid temperature T min-20 °CMax. Liquid temperature T max140 °CMax. Ambient temperature T max40 °CMaximal operating pressure PN16 barNote on dimensioning16 bar to 120 °C, 13 bar to 140 °C Motor dataMains connection3~400 V, 50 HzVoltage tolerance±10 %Motor efficiency classIE3Nominal power P 24 kWBrated current I N8.2 ANominal speed n1450 1/minPower factor cos φ0.79Motor efficiency η M 50 %85.8 %Motor efficiency η M 75 %87.6 %Motor efficiency η M 100 %88 %Motor winding up to 3 kWMotor winding from 4 kW insulation classFSuity motorIP55 ...