We use cookies to optimize our website for you and to be able to continuously improve it. By continuing to browse the site you are agreeing to our use of cookies.
Disagree
119,596 used machines on RESALE, but how to find them? Machine Search
maximum number of results exceeded > 1000
please refine your search
new
Air dryer suitable for 15kW compressor. Designed for use with Aflatek Screw20A compressor. Technical specifications: Air Flow 1.5 m3 / min Dew Point 2 - 10 °C Inlet/Outlet diameter G-1'' Power 0,6 kW Matched Air Compressor power kW 7,5 Weight 45 kg Inlet temperature 45 °C Presure 0,8 Mpa Cooler R 134 Current 3 A Size 730x420x720 mm -Price is with VAT 21% included. Contact us if you need a VAT free offer. -For shipping costs contact us directly.
used
Vacuum tumbler Rühle MKR220, built in 2009, in a good used and functional condition. Completely made of stainless steel. Drum volume 220 liters, filling capacity up to 145 kg. Can be retrofitted with polterarm, mixing arm. Speed of the polterarm up to 50 rpm infinitely variable. Programmable Rühle control. Dimensions B/D/H 120/95/175 cm. Connected values 400 Volt, 4.3 kW, 12.1 A. Workshop tested, immediately ready for use. More on request.
used
I sell a screw compressor with air dryer: AIRKRONE 25 SS + Dryer ES30. Powerful engine 18.5 KW / 25 HP 174 m3 / h / 2900 l/min Built in 1997. Approximately 20,000 moto hours. Made in Austria Everything works. Available equal, 2 pcs in stock. Possible also separately without air dryer cheaper to buy. Price by appointment.
new
Advantages of Aflatek 3in1 7.5A: -5.5kW electrical motor. -Integrated 150l air tank. -Air and oil filters as well as oil separator already included. -Low noise and vibrations level. -Compact, vertical design. -Integrated air dryer. Technical data: Power supply , V: 3Ph 400V 50Hz Motor power, kW: 5.5 Drive type: Direct drive Motor protection: IP 54 Air supply at 8 bars, L/min: 500 Air tank, L: 150 Dimensions(length x width x height), mm: 1400x700x1380 Weight, kg: 310 Shipping details: Packaging: Plywood box on a pallet Dimensions (length x width x height), mm: 1500x800x1500 Weight, kg: 340 Tracking: Available -Price is with VAT 21% included. Contact us if you need a VAT free offer. -For shipping costs contact us directly.
used
Refrigeration dryer make KAESER type TA 5Machine -No: 1.7917.0 Machine -No: 05527 Year 1995Volume flow: 0.55 m³ / hPressure loss: 0.05 barMax. Operating pressure: 16 bareffective power consumption: 0.28 kWRefrigerant: R 22Quantity: 0.320 kgOperating pressure: 25/16 barPower connection: 220 V / 50 HzOutside dimensions approx: 490 x 630 x 742 mmWeight approx: 80 kgused, in very good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools
used
Electrically heated tempering furnace make HERAEUS GmbH Hanau type HM 13Machine -No: 28024, wiring diagram no. 1641Max. Nominal oven temperature: 1150 °Internal dimensions W x D x H: 400 x 650 x 250 mmRated power: 20 kWExternal dimensions: 1500 x 1300 x 1700 mmWeight: 940 kgusedPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools
used
Electrically heated tempering furnace make HERAEUS type HM 13Machine no .: 21103283 / 2832-01 Year of construction 1980 m. Inert gas annealing muffleMax. Nominal oven temperature: 1150 °Max. Inert gas muffle: 920 °Internal dimensions: 400 x 250 x 650 mmRated power: 20 kWContent of the gas-flushed room: 68 lOutside dimensions: 1385 x 1915 x 1705 mmused, in good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offerand are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools
used
2 convection ovens make HERAEUS type UT 5050 EKYear of construction 1981Maximum temperature: 300 ° CInside dimensions W x H x D: 435 x 400 x 480 mmVolume: 105 lelec. Connection: 220 V, 2 kWExternal dimensions W x D x H: 800 x 650 x 670 mmWeight approx .: 65 kgsecond handPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offerand are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools
used
Electric Hardening Furnace Fabr. NOLZEN Type KHR 30/20/50Machine No: 12272 Year 1968Internal dimensions: 300 x 200 x 500 mmMax. Temperature: 1100 °Max. Connected load: 14 kWOutside dimensions: 850 x 950 x 1600 mmused, in good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offerand are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools
used
Electric hardening furnace Fabr. LEADING type KMO / E 8Machine -No: 301077/89 Year 1989Max. Temperature: 1.200 °Internal dimensions W x H x D: 500 x 315 x 800 mmDrive value: 25.5 kWExternal dimensions L x W x H: 1700 x 1500 x 2100 mmWeight approx: 2000 kgWith- automatic pneumatic doorused, in very good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools
used
Güntner S-GFD 080B/2x8-N(D)
used
Air conditioner make HERAEUS / VÖTSCH type VEM 03/2240 LFabr. -No: 29515 built in 1988Temperature range from: -30 ° - + 100 ° CDimensions interior W x D x H: 1480 x 780 x 2000 mmHeat compensation + 20 ° C approx.: 1500 W+ 10 ° C: 1300 W+/- 0 ° C: 1100 W-10 ° C: 900 W-20 ° C: 600 WRefrigerant: R 502Refrigerant pressure: 1.6 barpermissible operating pressure: 23 barTemperature deviations: +/- 10 ° CConnected load: 380 V, 5.5 AProtection class: IP 20Weight approx .:510 kgWeight of control cabinet approx .: 310 kgDimensions oven: 2200 x 1000 x 2300 mmDimensions control cabinet: 800 x 600 x 2200 mmWith- Test room made of stainless steel- Pipe penetration 50 mm Drm.- Pipe penetration 80 mm Drm.- Door lockable, 2 leaves, door size 1430 x 2000 mm- Observation window 500 x 1000 mm- Separate electrical and control cabinetvery little used, in very good conditionPrice on request.Delivery: e ...
used
Warming cabinet make HERAEUS type T 6030Best. -No: 51000066 Machine -No: 8903337, built in 1989Max. Temperature: 300 °Internal dimensions: 370 x 352 x 231 mmInterior volume: 30 lHeating time of 25 ° C on300 ° C: 75 min.150 ° C: 30 min.70 ° C: 15 min.Curb weight: 40 kgOutside dimensions approx: 610 x 552 x 552 mmused, ready for operationPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools
used
Climate cabinet Fabr. TENNEYFabr -No: 577066J197Internal dimensions: 350 x 250 x 200 mmMax. Adjustability cold: - 88 ° CMax. Adjustability heat: + 176 ° CExternal dimensions L x W x H: 950 x 610 x 1700 mmWith- mobile undercarriage- stepless temperature adjustment- Timer- autom. cycle settingused, in good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools
used
Electric Hardening Furnace Fabr. PEDE Type M 3 / SFabr. -No: 1075 Com. -No: 5875 Year 1987Max. Temperature: 1200 °Internal dimensions approx: 280 x 200 x 700 mmOutside dimensions approx: 980 x 1100 x 970 mmElectricity requirement: 13 kWPower connection: 380 V / 50 HzWith- Timerused, in good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools
used
With warranty 12 months, immediately available - T max 150°C, increase to 250°C possible on request - Inside W 1000 x D 1000 x H 1500 mm - Outside W 1864 x D 1560 x H 2440 mm - Capacity 1500 liters - Inlet rails, for feeding the furnace with a loading rack - JUMO DICONtouch (10 programs with Ethernet interface) - Weekly timer - with exhaust fan 360 m³ / h - Door limit switch - Recirculating air fan, switch-off when the door is open, with time monitoring and fan overrun - Temperature limiter - Horn incl. light - Heating capacity 17.4 KW - Weight: 760 kg - Documentation, CE declaration, e-plan We are happy to offer installation and commissioning. We stock new and used industrial furnaces. Get in touch with us! Viewing in our warehouse by appointment.
used
Zinc melting furnace RAUCH ZSO 450 BMasch. -No: 70112/836597 Year of construction 1997Technical specifications:Max. Temperature: 450 degreeHeating output: 96 kWWeight approx: 1300 kgWith- 1 control cabinet- ZFB conveyor belt including drop chuteusedPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools
used
Hardening furnace make NABER type 8 / LFabr. -No: 62604 built in 1984Technical specifications:Max. Temperature: 1260 ° CInternal dimensions approx. W x D x H: 700 x 900 x 1200 mmDrive power: 27 kWWith- Controller C8usedPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools
used
Electric hardening furnace (muffle furnace) make HERAEUS type MR 260Machine -No: 0218Technical specifications:max.temperature: 1000 °Dimensions approx: 800 x 600 x 1300 mmWith- underframeused, in good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools
used
Electric hardening furnace (muffle furnace) make HERAEUS type MR 260Machine -No: 7106536 built in 1971Technical specifications:max.temperature: 1000 °Dimensions approx: 800 x 600 x 1300 mmWith- underframeused, in good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools
new
MINK MV 0312 B Dry claw vacuum pump Dry claw vacuum pump BUSCH MINK MV 0312 B DRY VACUUM – QUIET, EFFICIENT AND COMPACT Quiet operation Low noise level thanks to state-of-the-art acoustic solutions, can be installed at workstations Efficiency State-of-the-art claw technology, low energy consumption, minimized operating costs, almost maintenance-free operation, efficient air cooling Compactness Small size SPECIFICATIONS: Nominal flow rate: 290 m³/h Ultimate pressure: 150 hPa (mbar) Nominal motor power: 5.5KW Nominal engine speed: 3000 min⁻¹ Noise level (ISO 2151): 69 dB(A) Weight (approx.): 300 kg Dimensions (L×W×H): 940 x 500 x 650 mm Gas inlet: G 2" Gas outlet: R 11/4" Dimensional Drawing Dry claw vacuum pump BUSCH MINK MV 0312 B Manufacturer's code MV 0312 B Pumping speed Air at 20°C. Tolerance: ±10% Markets & Applications Biogas P ...
new
Busch MINK MM 1252 AV vacuum pump with 5.5 kW motor (flow rate 250 m3/h) Dry claw vacuum pump INDUSTRIAL VACUUM GENERATION – HIGH EFFICIENCY, LOW MAINTENANCE Busch MINK 1252 AV vacuum pump 250m3/h for CNC Significant energy savings compared to conventional vacuum generators, minimizing operating costs Almost maintenance-free operation Dry and contact-free operation Endurance Proven design for more than 200,000 vacuum pumps in operation Information: Vacuum pump: BUSCH MINK MM 1252 AV 250m3/h for CNC Ultimate pressure: 100hPa (mbar) Normal engine speed: 3000 min-1 ISO2151 Noise Level: 75dB(A) Weight: 240kg Zwnhrefr Dimensions: 101x51.5x45cm Gas inlet/outlet: G 2" / R 1" Motor: 5.5 kW 3 x 230/400 V, 50 Hz Speed: 3000 rpm Bg. 112M B5-250 IP 55 Inlet Side: G2 Check Valve Outlet side: Integrated silencer Inlet filter: with paper cartridge Technical Specif ...
used
Electric annealing furnace make NOLZEN type WL 20/16/30Machine -No: 3517 built in 1971 Technical specifications Max. Temperature 1150 ° Internal dimensions 200 x 160 x 300 mm Electrical consumption 6.0 kW Power connection 380 V / 50 Hz External dimensions approx. 600 x 700 x 1000 mm With - Temperature display / timer used, in good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools
used
Electric annealing furnace make NOLZEN type WS 20/19/45Machine -No: 3191 built in 1972Technical specifications:max.temperature: 650 °Internal dimensions: 200 x 190 x 500 mmElectrical consumption: 3.6 kWPower connection: 380 V / 50 HzExternal dimensions approx .: 600 x 700 x 1200 mmWith- Temperature display / timerused, in good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools
used
Electric annealing furnace make NOLZEN type WL 20/19/50Machine -No: 3241Technical specifications:max.temperature: 1150 °Internal dimensions W x H x D: 210 x 190 x 500 mm:Electrical consumption: 9.5 kWPower connection: 380 V / 50 HzExternal dimensions approx. 1050 x 610 x 1630 mmWith- underframe- temperature displayusedPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools
used
Electrode heater make KÜPPERSBUSCH type SET 10Machine -No: 1937 built in 1980Technical specifications:Internal dimensions approx: 230 x 250 x 470 mmControl voltage: 220 VPower: 2.0 kWExternal dimensions approx .: 410 x 370 x 690 mmusedPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools
new
Spray drying booth L8000mm, W4000mm, H2600mm All applicable standards 28.000m³/h in-blow-out Lacquered temp. 20°C Drying temp. 70°C Direct gas burner 300KW Stun, filter, grid assignment, Lighting.
used
- Deshumdificador Secador - Cargador motor trif?sico 380V - Capacidad 20l. - Soporte
used
Used Mini Spray Dryer Buchi B-290. Technical data Mini Spray Dryer B-290 Power consumption max. 2900 W Connection voltage 200 – 230 V ± 10 % Frequency 50/60 Hz Environmental conditions - for indoor use only Temperature - 5 – 40 °C Altitude - up to 2000 m Humidity - maximum relative humidity 80% for temperatures up to 31°C decreasing linearly to 50% relative humidity at 40°C Evaporating capacity 1.0 l/h H2O, higher for organic solvents Airflow max. of 35 m3/h Motor control - Frequency converter Max. temperature input 220 °C Heating capacity 2300 W Heating control PT-100, fuzzy logic, control accuracy ± 2 °C Interface Serial port RS-232 for all parameters Spray gas - Compressed air or nitrogen / 200 – 800 l/h, 5 – 8 bar Nozzle tip diameter 0.7 mm standard, other sizes 1.4 and 2.0 mm available Possible particle diameter range 1 – 25 µm Mean residence ...
used
Stock# UG6345 Unused atmospheric cabinet dryer by Airflow Premier Industrial Oven (UK). Chamber construction mild steel. Inside dimensions of drying chamber: W 3250 mm x D 1850 mm x H 2050 mm. Working temperature range up to 60C. Dryer is equipped with 2.2 kW centrifugal fan, whch can give air circullation up to 4.2 air change per minute. Heating - electric - 15 x el heaters each with power 3 kW. Outside dimensions: W 3500 mm x H 2900 mm x D 2200 mm. Machine has local control panel.
used
capacity 250 kg
used
DRYER JPS/100, of the year 2014 (Equipamientos J. Puchades - machinery for plastics).
used
Industrial Laundry Kannegiesser Frontal Dryer Passat KT-146 G-WU, 28 Kg Industrial Laundry Dryer Passat KT-146 G-WU from ongoing operation Fab. Kannegiesser Frontal loading Powered by gas 28 kg 3.5 KW Year of construction 2005
used
Nautical vacuum dryer Nautical vacuum dryer Hosokawa Alpine
used
I sell the wood dryers NARDI for 30m3 wood. Control panel Nardi, a savings computer. Volume net wood 25-30 m3. 4 fans side by side Chamber 9x4x h.3m Door on each side, flow system. Without rails. Condition very good, worked very little Car, electrics and fans without any problems. Available same. Already dismantled.
used
Reliable refrigerant dryer MARK MDX 6500 Wide range of applications Top condition
used
straight through inlet wire diameter 2,5 mm finished wire diamter 0,8 mm number of drafts 8 diameter of capstan 400 mm speed -meters/sek 15 m
used
ERSA HOTFLOW - 7 Tunnel Dryer / Belt Dryer / Continuous Dryer Type: HOTFLOW – 7 Convection oven as a tunnel dryer / belt dryer / continuous dryer for drying plate materials on the top and bottom. 4 heating zones at the top, 4 heating zones at the bottom, for drying on both sides. Rolling rods at a distance of approx. 4.5 cm on 2 transport chains as a support for plates Temperature range from 20° to 300°C Nominal power Pn = 72 KW Nominal current In = 106 A Voltage: 3 x 400 / 230V Back-up fuse: 3 x 125 A Frequency 50 Hz Power 67 KW Year of construction 2000 Dimensions: Length: 5250 mm Width: 1300 mm Height: 1750 mm (incl. warning light) Height: 1450 mm (Without warning light) Dry section: Length of heating zones: 3300 mm Transport width: 500 mm For possible use as a soldering oven – soldering machine – reflow oven, a cooling zone must be set up. ...
used
DRYER CAMES – AR/20 Year: 2003. Speed: 12.000 bph. Direction: Clockwise. 20 heads. Safety protections.
used
Washer-dryer CAMES – WDT 10 Year: 2000 Speed: 6.000 bph. Direction: Counterclockwise. 10 heads for bottle washing. Drying with air blades. Safety protections.
used
Washer-dryer CAMES – WHD 12-8 Model: WHD 12-8. Year: 2004. Speed: 5.000 bph. Direction: Clockwise. 12 lanes for air conditioning. 8 heads for bottle washing. Air knife dries bottles. Safety protections.
used
Plastic dryers - Arburg Thermolift 100-2 Year of construction: 2000 Drying of plastic with hot air Capacity: 100l Heating capacity: 4.5 kW Weight: 130 kg Built-in vacuum pump for automatic conveying of the plastic Price: On request
used
The drying/conveying system for plastic - Motan Metrolux A80 Year of construction: 2017 Drying plant for plastic with 1 independent silo Warm air generator with a doubled molecular sieve Power: 13.7 kW Heating capacity: 10.5 kW Capacity: 80 m³/h Touch control panel Hermetically insulated silo with a capacity of 300 litres Silo has heating function and function of temperature maintenance Price: On request
used
20-15- Timber drying kiln (new) Type CSD-HT-BR 70 Internal dimensions (width x depth x height) 7500 x 7160 x 4100 mm External dimensions (width x depth x height) 8080 x 7760 x 5500 mm The section of the structural columns of the chamber is 160 x 70 mm Snow load for the roof is 80 Kg/m2 Wind resistance of walls 27.8 m/sec Warming with glass wool Walls ǂ100mm Roof ǂ100mm Door ǂ100mm Door: sliding type, hung on a rail Wood for drying: various Loading the drying chamber with a forklift The heating system is gas Fuel - GPL gas Maximum thermal energy (300 kW) Maximum chamber temperature 75 °C The number of fans in the chamber is 5x3kw The total capacity of the fans is 162,500 m3/hour Number of probes: 4 HT/ 8 AWM/ 2 EMC/ 2 Temperature Voltage 400 V 50 Hz Total power 17kw)
used
Plastic dryers - Piovan Year of construction: Dryer with 2 molecular sieves, 2 silos Sieves work alternately, during the drying process one sieve works and the second sieve regenerates Silos capacities: 200l and 100l Silos are hermetically insulated Silos can work separately and independently with different materials and temperatures Dryer with suction conveyors Price: On request
used
Plastic dryers - Arburg Thermolift 100-2 Year of construction: 1994 Drying of plastic with hot air Capacity: 100l Heating capacity: 4.5 kW Weight: 130 kg Built-in vacuum pump for automatic conveying of the plastic Price: On request
used
Pressure: 16 bar Motor: 0,26 kW Free air delivery: 2,6 m³/min Measurement (WxHxD): 407 x 795 x 673 Weight: 46 kg Compressed air connection: 1
used
Pressure: 16 bar Motor: 0,57 kW Free air delivery: 6,2 m³/min Measurement (WxHxD): 400 x 795 x 673 Weight: 55 kg Compressed air connection: 1 1/2
used
Pressure: 16 bar Motor: 0,31 kW Free air delivery: 4 m³/min Measurement (WxHxD): 407 x 795 x 673 Weight: 47 kg Compressed air connection: 1
used
Pressure: 16 bar Motor: 0,95 kW Free air delivery: 5,2 m³/min Measurement (WxHxD): 510 x 860 x 790 Weight: 62 kg Compressed air connection: 1 1/2