druck machine used for sale

On behalf of a customer, we are selling an HP JetFusion 3D printer as a spare parts carrier., Included:, - 22x 4KG PA12 (NEW), - 3x Fusing agent, - 6x Detailing agent, - 1x Bright Fusing, - 1x SERV ASSY-MCB-V5 PN: M2K85-67391, - 1x SERV ASSY-CABLE-PEN CARRIAGE POS CHE PN: M2K85-67388, - 1x SERV ASSY RELAY CONTROL PCB PN: M2K85-67103, - 1x SERV ASSY-PCA-CLEAN AIR PN: M2K86-67235, - 1x SERV ASSY ECHAIN v2 PN: M2K85-67298, - 1x SERV ASSY PLATFORM SEALS PN: M2K86-67024, - 2x SERV ASSY-EXHAUST HOSE / Extraction hose PN: M2K86-67073, - 1x SERV ASSY-FUSING CARRIAGE DRVE PN: M2K83-67007, - 1x SERV ASSY CABLES BUCKET PN: M2K85-67175, - 1x SERV ASSY-EXHAUST FAN BUNDLE PN: M2K85-67263, - 1x Air Exhaust Filter PN: 8WA29A, - 1x SERV ASSY-ADS CHAIN-V2 PN: M2K86-67289, technology: HP Multi Jet Fusion Technology, Effective construction volume: Up to 332 × 190 × 248 mm, build speed: 2,199 cm 3 /hour, C ...

For sale is a used HP Multi Jet Fusion 540 3D printer. The HP Jet Fusion 540 is known for its reliability, efficiency, and high-precision results. Its ideal for small to medium production runs and is perfect for prototyping, functional parts, or complex design requirements., The device was purchased for R&D purposes to print prototypes during development. Throughout its lifetime, it was used only lightly—on average, about once a week. The printer is therefore in very good condition., Special features:, • Efficient material utilization: Up to 80% of the material can be reused, reducing printing costs. The machine automatically mixes the old and new materials., ● High precision: Ideal for industrial applications where precision detail and dimensional accuracy are required., ● Easy to use: User-friendly interface and software simplify the workflow., Condition and maintenance:, ● L ...

Used 3D printer: HP Jet Fusion 580 – industrial-grade color multijet technology, Immediately available and ready for use. Installation service, commissioning, and training available., For sale is a used HP Jet Fusion 580 3D printer in very good condition. The machine is fully functional, regularly serviced and is ideal for professional applications in prototyping, design, product development and small series production – especially where Color parts with high strength and precision are required., ---------------------------------------------------------------, Highlights of the HP Jet Fusion 580:, - Color 3D printing: Print functional components in Full color (CMYK) – ideal for illustrative prototypes and visualization., - High level of detail: Finest resolution for delicate geometries and complex structures., - Fast printing process: HP Multi Jet Fusion technology for short produc ...

Replacement column for IDRA 3300, extendable, D330mm x 7350mm, (5), PR11708354, Idra, refurbished Special price Replacement column 5 for IDRA 3300, D330mm x 7350mm, Trapezoidal thread TR 330 x 10, 4932 kg Refurbished! The column has been overhauled by Druckguss Service, is in the original packaging and is in top condition ready for immediate use. We store them in a dry and thermally insulated room. The column can be inspected, tested and collected from us at any time. We would also be happy to send you a sketch of the design or deliver the goods to your address. Attention: We offer various columns, adjusting nuts, spar nuts and 2-piece nuts from: IDRA D330, D300, D260, D250, Oleopress/OP Die Casting: D285, D250, Frech: D375, D330, D300

Replacement column for IDRA 3300, D330mm x 7115mm, (6) 220735, Idra, refurbished Special price Replacement column 6 for IDRA 3300, D330mm x 7115mm, Trapezoidal thread TR 330 x 10, 4775 kg Refurbished! The column has been overhauled by Strate, is in the original packaging and is in top condition ready for immediate use. We store them in a dry and thermally insulated room. The column can be inspected, tested and collected from us at any time. We would also be happy to send you a sketch of the design or deliver the goods to your address. Attention: We offer various columns, adjusting nuts, spar nuts and 2-piece nuts from: IDRA D330, D300, D260, D250, Oleopress/OP Die Casting: D285, D250, Frech: D375, D330, D300

Used Printing Board For Bread / RollsDescriptionManufacturer: bmTECTyp: Printing BoardYear of Construction : 2021See pictures for details.

Pressure zone turret, softforming interchangeable profiles for softforming machines, double-end tenoners, edging machines, scoring motor, chipper motor, milling motor for edging machines -HOMAG softforming interchangeable profiles for softforming profiles can be quickly converted to straight edges -with heavy leadership -laterally movable -with counter -Dimensions: 1300/780/H620 mm -Weight: 260 kg

Press brake tool holder for bending tool, die, upper knife, upper tool -Tool holder: pressure plate intermediate holder for: press brake -Holder: hole spacing 100 mm -Dimensions: see photos -Quantity: 5 holders available -Price: per piece/minimum purchase 5 items. -Dimensions: 150/15/H50 mm -Weight: 0.6 kg/pc.

Hydraulic press, bending machine, straightening machine, profile straightening system, strip straightening machine, strip straightening device, shaft straightening system, combined bending machine-straightening press, profile bending machine, bending machine, flat iron bender, horizontal bending/straightening press, horizontal bending machine -Hydraulic press: Straightening system Straightening machine Profile straightening system with roller conveyor -Pressure force: 10 ton -Pressure: max 100 bar -Roller conveyors: 2x 1000/170/H1110 mm / rollers Ø 56 x 140 mm -Transport dimensions: 1335/1220//H1470 mm -Weight: 807 kg

Hose reel, hose unwinder, tank hose reel, wall-mounted reel, oil conveyor, hose reel, automatic hose reel, oil hose reel, grease hose reel, grease hose reel, compressed air hose reel -Hose reel: Double hose reel oil-compressed air -Oil hose reel: length 6.65 m with flow meter -Compressed air: hose length 10.57 m -Dimensions: 800/500/H550 mm -Weight: 76 kg

ROLAND 906-6 LVV - Year 2002, 6 Color + Conventional Varnish + UV Varnish, Total impression count 340 million approx, Sheet-fed offset press - Printing units: 6 + 1 Conventional varnish unit / UV varnish (Dryer 3+3), incl. with hybrid rollers, High pile and extended delivery, Technische Merkmale:, Speed 13,000 Sec/h, Paper size max 1020 x 1420 mm, Paper size min 600 x 850 mm, Thickness 0.2-1 mm, RCI color control system, APL, Moisture cooling device, IR-Thermonlufttrockner, Coloring plant tempering device, Sludge treatment device, OXY-Drying Dust Extraction System, Eltosch Drying (IR hot-air drying system in the boom-hybrid), 3x Conventional IR Dryer, 3x UV dryer in extended delivery, Non-stop, Temperature control, Lacquer work: Interdeck-doctor blade system

Filter area: 3 m2 Installed power: 2,45 kW Horizontal disk filter with manual discharge system This filter uses the horizontal disc system, the only type able to ensure the panel is undamaged even by accidental interruptions in filtration. There is no risk to the panel even in the event of incorrect operation or power cuts. The liquid in the vessel, batching unit and pipes is filtered perfectly at the end of work using a special disc for the purpose. The special filter unit used means that cleaning can be carried out simply using a jet of water and the sped al chute supplied. Manufactured in stainless steel throughout, including the feed pump, pipes, valves and caster-mounted frame. Complete kieselgur batching system with vanable delivery piston pump and stainless steel tank with built-in electric mixer. Electric panel complete with every control and safety device required for safe, depe ...

Mahle Schraubenkompressor MSK I7,5/10/U3 RA2516 Technical Specifications: Item No.: 5129916 Serial No.: MSK I7,5/10/U3 Year of Manufacture: 1998 Rated Power: kW Motor Speed: rpm Max. operating pressure: 10.0 bar Ambient temperature: °C Tank capacity: 350 L Flow rate: L/min @ bar Price: plus sales tax, ex works from the central warehouse of Dr. Sonntag GmbH & Co. KG, 97076 Würzburg Features: Construction year: 1998 Tank capacity [l]: 350 Max. operating pressure [bar]: 10,0 Für eine individuelle, fachmännische Beratung setzten Sie sich einfach mit uns in Verbindung. Kontaktieren Sie uns einfach telefonisch oder per Mail. Wir helfen Ihnen gerne bei der Planung und Umsetzung Ihrer Projekte. Wir freuen uns darauf von Ihnen zu hören. Mit freundlichen Grüßen Ihr Team der Dr. Sonntag GmbH & Co. KG Ihr Spezialist und Ansprechpartner für Intralogistik

Key data: 1400 mm, 1100 mm

For sale here is a new 160 mm pressure blasting cabinet from MHG. The plant was ordered in 2025 and installed in January 2026. New price 2025 approx. 19000,-€ with 12 weeks waiting time. Only 35 hours of operation. A few hours are added every day, the system is still in use. The installation site should be at least 210 cm deep. The blasting chamber is approx. 140 cm wide and 110 cm deep. The system was ordered with rubber cladding, turntable and LED lighting. Designed for use with corundum. You will receive an invoice with VAT on request. The price is net, plus 19% VAT. The facility is available immediately. With a 6 or 8 mm nozzle, the system can even be operated with a 7.5 Kw compressor + compressed air accumulator. Perfectly sufficient for blasting small parts. More pictures on request. Ideas and suggestions for the purchase process, gladly in a personal conversation. I am h ...

200 litre stainless steel tank Manufacturer : Ahrens & Bode Type: Pressure Vessel Content: 200 litres Technical specifications : cylindrical stainless steel container on feet, single-walled Conical spout Operating pressure up to 5 bar Dimensions: approx. Diameter: 360 mm, diameter lid 500 mm, cone 400 mm Cylindrical height: 1,840 mm Enema: 3x DN 50 Discharge: DN 65

High-performance pneumatic embossing machine Pneumatic embossing machines allow the reproduction of embossing designs on various materials such as leather, plastic, synthetics, non-woven fabrics, flock, and others using pressure and temperature. This can be used for signs, logos, decorations, or lettering. By branding your products, you can strengthen customer loyalty to the guaranteed quality, aesthetics, and durability they associate with a particular brand or logo. The machine is equipped with: - Temperature control - Cycle time control - Belt feed length control - Clamping force control - Manually extendable/retractable table The machine is in perfect, like-new condition.

<br>SOS block bottom bag machine TRIUMPH III, Windm Ller + H Lscher, with lower patch unit, 2-ply, photocell, several former plates and aisle, option: 4-color printer for final cleaning<br><br>br>

SOS Block bottom bag machine TRIUMPH III, Windm�ller + H�lscher, with bottom patch unit, 2 plies, photo cell, several former plates and gears, option: 4 colour tail end printer

The injection blow molding machine VICTOR MACHINERY MSZ 30 for the production of bottles was built in 2015. Technical parameters : - screw diameter: 40 mm - screw L / D: 22: 1 - injection weight (HDPE): 190 g - maximum speed of the screw: 10-225 rpm. - heating power: 8.3 kW - injection clamping force: 292 kN - blow clamping force: 46.7 kN - maximum plate size (L x W): 400 × 270 mm - minimum mold thickness (H): 180 mm - mold heating capacity: 3 kW - opening: 220 mm - drying cycle: 3.5 sec. - engine power: 15 kW - hydraulic pressure: 15 MPa - suitable bottle range: 3-800 ml - maximum bottle height: ≤190 mm - maximum bottle diameter: ≤100 mm - minimum air pressure: 1MPa - compressed air discharge rate: ≥0.7 M3 / mm - water flow: 3 M3 / h - total rated power with mold heating: 26.3 kW - dimensions (L x W x H): 3.26 x 1.2 x 2.2 m - net weight: 4 tons

3D CNC Router T-Rex 1215 / Technical Data : Equipment / product data CNC-milling machine type High-Z/TRex series: Drive: 3 brushless brand stepping engines with 4,5 ampere. Possibility of sliding through long and up to 120mm high materials, no belt drive at the ende of the X axis! Linear guide on all exis by HIWIN / THK ! Multiple ball-bearing ball-screw spindle on all axes, proprietary brand! Rapid traverse max. ca. 12.000 mm/min Operating speed max. ca. 8.000 mm/min Technical definition X/Y : 0,005mm (1/10 Schritt); Z: 0,0025mm Backlash maximal ca. +/- 10µm (0,010 mm) Repeat accuracy: ca. 0,01 mm Clampin surface of grooven panel / T-slot table 1860 x 1340 mm Travels: X=1500mm; Y=1200mm; Z= 130 mm Non-contact reed sensors / reference switches / limit switches on all axes Double secured emergency-stop button Energy chains for a clean cable routing Total dimensions wi ...

Type R-RP630 Working width 630 mm Min. working length 500 mm Working thickness 3-110 mm Feeding speed 6-30/min Total motor power 20,25 kW Motor for first unit 11 kW Motor for second unit 7,5 kW Feeding motor 1,5 kW Lifting motor 0,25 kW Diameter of first roller 190 mm Diameter of second 190 mm Abrasive belt size 650x1920 mm Working air pressure 0,6mpa Volume of dust collection device 8000 m3/h Transport dimensions 1900x1200x2100mm Weight 1200kg

Type R-RP1300 Working width 1300 mm Min. working length 500 mm Working thickness 3-110 mm Feeding speed 6-30/min Total motor power 30,37 kW Motor for first unit 15 kW Motor for second unit 11 kW Feeding motor 4 kW Lifting motor 0,37 kW Diameter of first roller 240 mm Diameter of second 210 mm Abrasive belt size 1330x2200 mm Working air pressure 0,6mpa Volume of dust collection device 9600 m3/h Transport dimensions 2700x2100x2100mm Weight 3300kg

Automatic labeling machine designed for automatic sticking of self-adhesive labels on cylindrical packages (bottles, jars, cans, etc.) and on packages with rectangular cross-section. After equipping the machine with a packaging orientator, it is also possible to label packaging with irregular cross-section (oval, lenticular, etc.) A single label is stuck on cylindrical packages, while flattened packages can be covered with two labels at the same time. The labeller can work independently or cooperate with other devices in the technological line. It is possible to apply alphanumeric characters to the labels by hot printing through the marking foil. Efficiency: depends on the size of the package and label, up to 3000 pcs / h Max packaging dimensions: length - 80 mm, height - 300 mm Maximum dimensions of labels: length - limited by the size of the package, height - 165 mm  ...

Type SE-360D Thickness of panel 10-60 mm Edging thickness 0,3-3 mm Feeding speed 13-22 m/min Air pressure 0,6 MPa Voltage 380V/50Hz Total install power 10,5 kW Min. panel dimensions 150(L)x150(W) mm Made in 2017 y. Transport dimensions 4420x900x1560 mm Weight 1400 kg

Type SK-1000-P4 Working width 1000 mm Min.working length 400 mm Working thickness 2-80mm Polishing roller speed - Frequency control Feeding speed 5-20m/min Total motor power 8.14kW Disc motor 1.5kW1 Disc swing motor 0.37kW 1 Screw roller motor 2.2kW 2 Feeding power 1.5kW Working table up and down 0.37kW Transport dimensions 2700x1700x1600mm Weight 2300kg

Type SK-1000-P6 Working width 1000 mm Min.working length 500 mm Working thickness 2-150mm Polishing roller speed - Frequency control Feeding speed 3-12,5 m/min Total motor power 13.87 kW Disc motor 1.5 kW1 Cross motor 1.5 kW 1 Screw roller motor 2.2 kW 2 Feeding power 2.2 kW Up and down motor 0.37kW4 Swing motor 0.37kW 2 Working table up and down 0.55 kW Transport dimensions 3650x1850x2100mm Weight 4200 kg

RUIAN KODA MACHINERY ENG-500 foil gloves making machine, manufactured in China in 2020 is dedicated to the production of foil products i.e. breakfast bags or disposable gloves, using interchangeable sealing moulds. The robust steel body of the film glove production line ensures high operating stability, even at maximum production speed. The copper dies included with the machine allow for the production of high-quality disposable gloves with a maximum length of 400 mm and a width of 300 mm. The ENG-500 automatic film glove production line produces up to 500 pieces of this type of item in one minute. The produced gloves are characterised by two thick layers, effectively protecting the hands from viruses and bacteria. The automatic film glove production line is equipped with, among others, an AISET temperature controller, a PLC controller and a 2.2 kW YASKAWA servo drive, which ensure ...

Type R-RP1000 Working width 1000 mm Min. working length 500 mm Working thickness 3-110 mm Feeding speed 6-30/min Total motor power 20,25 kW Motor for first unit 11 kW Motor for second unit 7,5 kW Feeding motor 1,5 kW Lifting motor 0,25 kW Diameter of first roller (steel) 190 mm Diameter of second (ruber) 190 mm Abrasive belt size 1020x2000 mm Working air pressure 0,6mpa Volume of dust collection device 8000 m3/h Transport dimensions 1900x1600x2100mm Weight 2200kg

Type SK1300-P6 Working width 1300 mm Min.working length 370 mm Working thickness 5-140mm Polishing roller speed - Frequency control Feeding speed 2.5-12,5 m/min Total motor power 16.87 kW

Type DTW-120A Horizontal three axis Brush roll height 300/600/300 mm Brush roll diameter 300 mm Roller speed: frequency control Power 1.5 kW Transport dimensions 1780x760x880 mm Weight 165 kg

Type DTW-60A Horizontal three axis Brush roll height 300/300 mm Brush roll diameter 300 mm Roller speed: frequency control Power 1.5 kW Transport dimensions 1220x720x900 mm Weight 150 kg

Stainless horizontal fish slicer with adjustable thickness, adjustable stroke and speed.

Type DTL-20A Brush roll height 200 mm Brush roll diameter 300 mm Roller speed: frequency control Electric up and down Power 0.75 kW Transport dimensions 860x750x1100 mm Weight 140 kg

Type 700 Motor power 4 kW, 1450 aps/min Blade length 5020 mm Blade width 19-50 mm Blade speed 18 m/s Throat / max. cutting width 700 mm Max cutting height 430 mm Table dimentions 790 x 500 mm Tilting table 0°- 45° Dust port diameter 2 x 100mm

Length 300/600 mm Width 72 mm Roughness P240/P320 Holder 4,5 mm Price 0,87 Eur/1 pcs. (300) (EXW Jonava, Lithuania) Price 1,74 Eur/1 pcs. (600) (EXW Jonava, Lithuania)

Type 800 Motor power 4.5 kW, 1450 rpm Blade length 5611 mm Blade width 19-50 mm Blade speed 18 m/s Throat / max. cutting width 800 mm Max cutting height 470 mm Table dimentions 840 x 500 mm Tilting table 0°- 45° Dust port diameter 2 x 100mm

Type 500 Motor power 3 kW, 1450 rpm Blade length 4100 mm Blade width 19~38 mm Blade speed 18 m/s Throat / max. cutting width 500 mm Max cutting height 350 mm Table dimentions 730 x 480 mm Tilting table 0°~ 45° Dust port diameter 2 x 100mm

Type 500 Motor power 3 kW, 1450 rpm Blade length 4100 mm Blade width 19~38 mm Blade speed 18 m/s Throat / max. cutting width 500 mm Max cutting height 350 mm Table dimentions 730 x 480 mm Tilting table 0°~ 45° Dust port diameter 2 x 100mm

Collman Building Machine Ref: RB008 Quick building due to double rollers Manual With full rack of plates

Collman Building Machine Ref: RB003 For tyres up to 2.5m and 1m wide With hydraulic cutting unit Can use for smooth and groove Buffing arm can be supplied but will need to be rebuilt with spare motor before being able to use as a Buffer Fully operational Peel, Buff (with arm), Build, Cut Hydraulic motor you can use to cut through cured tyres (very strong arm) Modern Panel

Type R-R-RP1300 Working width 1300 mm Min. working length 538 mm Working thickness 3-110 mm Feeding speed 6-30 m/min Total motor power 77,12 kW Motor for first unit 22 kW Motor for second unit 30 kW Motor for third unit 18,5 kW Abrasive belt size 1330x2200 mm Working air pressure 0,55mpa Volume of dust collection device 12000 m3/h Transport dimensions 3090x2020x2260 mm Weight 4700 kg

Globe Bread crumber Stainless bread crumbing machine, 220mm diameter chute, 4Kw motor

Maximum width of forming film : 160 mm Forming area : 150 x 125 mm Maximum forming depth : 15 mm Mechanical output : 100 cycles per minute Output of blister : 300 blisters per minute Reel of thermoforming film : 500 mm Reel of lidding film : 300 mm Inlet air pressure : 6-8 bar Feeding : Manual(can be automatic) Forming type : Vacuum

Type 400C Surface planer: Table dimensions 400?1800 mm Cutterblock diameter 70 mm Cutterhead rotating speed 5700 rpm 3 knives 400x20x3 mm Max table adjustment 4 mm Thickness: Table dimensions 400x760 mm Max cutting depth 4 mm Feed speed 7 m/min Cutterblock rotation speed 5700 rpm Max working height 220 mm Min working height 4 mm Mortising: Table dimensions 250?500 mm Longitudinal stroke 205 mm Trasversal stroke 95 mm Chuck (SX) 16 mm Chuck rotation speed 5700 rpm Motor 3 kW Accessories: service wrenches, guards on mortise chuck, planer guide. Weight 390 kg

Type 300C Surface planer: Table dimensions 300?1500 mm Cutterblock diameter 70 mm Cutterhead rotating speed 5700 rpm 3 knives 300x20x3 mm Max table adjustment 4 mm Thickness: Table dimensions 300x660 mm Max cutting depth 4 mm Feed speed 7 m/min Cutterblock rotation speed 5700 rpm Max working height 220 mm Min working height 4 mm Mortising: Table dimensions 250?500 mm Longitudinal stroke 205 mm Trasversal stroke 95 mm Chuck (SX) 16 mm Chuck rotation speed 5700 rpm Motor 2,2 kW Accessories: service wrenches, guards on mortise chuck, planer guide. Weight 290 kg

Type FZ-515 Thickness of panel 10-60 mm Edging thickness 0,4-3 mm Feeding speed 15 m/min Air pressure 0,8 MPa Total install power 6,5 kW Panel width ? 60mm Transport dimensions 3700x900x1700 mm Weight 1200 kg

UNWORK CENTRE TO 54 MANMOTOR POSTS BOB - 560 ROTANTE COLLECTION FOR BOBINE - 1600 MM BANCAL OF DISTRIBUTION WITH 3 TESTES TO LEGARE

No.2 "O.M. LESMO" No.2 CORDATRICI TORSION "O.M. LESMO" TORSIONE BOBINE 1250 MM No.9 CONSS FOR BOB DIA 1250 AND No. 9 TRANSPALLET ECLTS No.5 BAR ABAR WITH BILANCINO FOR BOB - 1000

20-09-511 Vacuum Cleaning Machine WOODLAND MACHINERY (new) Type LBM250C Motors 2 x 0.75 kW Working length 1300 mm Working thickness 80 mm Transport Dimensions 2400x600x1300 mm Weight 340 kg

20-09-510 Edge Banding Machine WOODLAND MACHINERY (new) Type GB/T10850 Engine power 0.18 kW Air Pressure 3-6 Bar Voltage 220 V 50 Hz Total Power 1.4 kW Heating Capacity 1.2 kW Edge width 8-50 mm Edge thickness 0.3-3 mm Feed speed 0-26 cm/s Vacuum workpiece Attraction Transport Dimensions Weight 300 kg