druck machine used for sale

The tech. Data are manufacturer or operator information and therefore non-binding. We reserve the right to prior sale, Our terms and conditions of sale apply exclusively.About usMore than 400 of our own machines in the warehouseMore than 8500 m² of storage space, crane capacity 70 tMore than 1000 items Accessories for your workshopYou want to sell machines, production lines or your company, then contact us. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Features: automatic non-stop delivery with conveyor, non-stop feeder with rods, pull mark left, push mark right, quick clamping frame for tooling, lower stripping station, upper stripping station, two exchange frames for lower stripping station. Without die-cutting plates. Processable materials: min. paper 90g/m², max. solid board 2000g/m², max. corrugated board/ with MasterSet 4/ 2mm, max. sheet size 760x1060mm, min. sheet size/with MasterSet 300x350/ 350x400mm, max. cutting pressure: 2.6MN/ 260t, max. machine speed: 8000 sheets/h, max. feeder pile height without non-stop/ in non-stop operation: 1500/ 1200mm, max. feeder pile weight: 1500kg, max. delivery pile height: 1400mm, max. delivery pile weight: 900/ 1340kg. Operating hours: 1525h. An on-site inspection is possible.

technical data: Purpose: for boards Dimensions: 700 mm wide Note: as good as new Warehouse: Wiesentheid

technical data: Make: Jansen Type: for OSS 71 (from 1972-1990) Type No: HS No. 7649 Purpose of use: 1 pressure register at the top Dimensions: for frame supports 62/80

technical data: Type: Pressure register for OSS71 (up to 1972) Type No: HS No. 5942 Purpose: Pressure register Dimensions: for frame supports 62x80

Eurolux Beer Tank/ Storage Tank/ Pressure Tank 400 litres with cooling jacket in AISI 304, working pressure: +2,0 bar NEW Eurolux Beer Tank/ Storage Tank/ Pressure Tank 400 litres with cooling jacket in AISI 304, working pressure: +2,0 bar NEW

Eurolux Beer Tank/ Storage Tank/ Pressure Tank 1000 Litres with cooling jacket in AISI 304, working pressure: +2,0 bar NEW Pillow Plate Inside Operating pressure:: +3,0 bar +2,0 bar Test pressure: +5,2 bar + 3,4 bar Operation vacuum: -0,15 bar - 0,15 bar Operation temperature: -10/+80°C -10/+130°C Material: V2A - AISI 304, 1.4301 Surface: pickled, passivated and neutralized Upper Bottom: - strong stackable crown - manhole lid round Ø 400 mm with 2 x handle - 1 x thread connection DN 50 with blind cap - 1 x overpressure valve - 1 x CO² venting valve - 6 x cap screws Cylindrical Body: - with cooling jacket 843 mm - connections for cooling jacket on the back inlet 1/2, outlet 1/2  ...

Renner compressed air tank Product description: Compressed air tank lying down Manufacturer: Renner SKU: 02280 Built: 2018 Condition: New device technical details: • Volume: 90 litres • max pressure: 11 bar • Compressed air output: G1 inches • Weight: 36 kg • powder-coated outside • Tmax: 100°C • Pieces: 4 pieces in stock High-quality compressed air tank Made in Germany (BWB container factory), with test certificate. metrics: • L x W x H: 970 x 290 x 410 mm Our price: 249,00 € (EUR) FP plus VAT from the grunow location (Brandenburg) (Changes and errors to technical data and prices reserved!)

Storage Tank / Beer Tank/ Pressure Tank in AISI 304 Operating pressure: 0,99 bar , Test pressure: 1,7 bar Material: V2A - AISI 304, 1.4301 Surface: inside and outside 2B=IIIC Top Bottom: with pressure lid 390 mm with 1 x thread connection DN 50 with 1 x overpressure valve with 1 x CO² connection with 6 x screws with 10 x reinforcing rings for better pressure resistance Lower Bottom: with outlet DN 50 with butterfly valve on 4 stable feets can be moved from all sides with a forklift / truck pallet Diameter: 1000 Total height: 1740 Zyl. Height: 900 Weight: 135

Eurolux - Pressure Filler for glas bottles with 12 stations – Capacity 0,5l: to 650 bottles/h - NEW Technical data: - Capacity 0,5l: to 650 bottles/h, it is also possible for : 0,33l, 0,7l, 1,0l, 1,5l /other capacity - Installed power 0,37 kW - Weight: 240 kg - Measurement: HxWxD: 200 x 1000 x 1000 mm - With 12 stations - Max. pressure tank: 4 Bar - Power supply: • Supply voltage 220/50Hz • Voltage control 24V 50Hz • Current Consumption 2A • Handling 1 Person • Operating Manual and Spare Parts List available. Video available All prices are valid Ex-Works, excl.VAT Freight Charges: depending on dimensions and destination Delivery: from 97753 Karlstadt-Karlburg Subject to prior sale

Eurolux - Pressure Filler for PET - bottles 12 stations with dosing pump – Capacity: up to 650 bottles/h - NEW Technical data: - Capacity 0,5l; 1,0l; 1,5l : to 650 bottles/h – for PET bottles for syrup, water, drinks with / without gas - Installed power 0,37 kW - Weight: 240 kg - Measurement: H x W x D: 200 x 1150 x 1100 mm - With 12 stations - With dosing pump - Max. pressure tank: 4 Bar - Power supply: • Supply voltage 220/50Hz • Voltage control 24V 50Hz • Current Consumption 2A - Handling 1 Person - semiautomatic Operating Manual and Spare Parts List available. All prices are valid Ex-Works, excl. VAT Freight Charges: depending on dimensions and destination Delivery: from 97753 Karlstadt-Karlburg Subject to prior sale

20x 800 ltr. VA2 transport tank, used, round standing, stackable, dome top 400 mm, residual outlet with disc valve NW 80, operating pressure 2 bar, test overpressure 3.4 bar, overpressure valve in the lid, pressure resistant for e.g. overlay with CO2 or CO2 impregnation, weight/h: 130 kg, cleaned inside, pressure-tested, very stable design, diameter: 1 m, H: 1.60 m, Price/pc: 940,- â?¬ plus VAT from dolgesheim warehouse

Pressure filler SEITZ TIRAX SF12 For normal and sterile filling of still and carbonated liquids at a filling pressure of up to 5 bar and for hot filling. Operating pressure: 5 bar 12 digits infinitely adjustable Capacity approx: 300 to max. 800 bottles/h Dimensions and weight: H x W x D: 2400 x 940 x 1120 mm Weight: 615 kg Operating instructions and spare parts list available!

Colors: 8 Gearless: No Fast Sleeve change: No 4 motor cnc per printing deck: Yes Computer supervision:Yes Web width:1320 Print width:1300 Min print repeat: 380 Max print repeat:1100 Mech speed: 350m/min working speed: up to 300m/min Unwinding & winding: Turret FLYING SPLICE Max reel diameter 1000 Drying: 2 zones , 4 fans 2 gas burners Video camera: Yes Corona threatment:NO Web guides: FIFE Viscocity control Yes Wash system : yes, F&K Ceramic anilox + closed chambered doctor blade   1x 80 L/cm, 2x 200 L/cm, 2x 120 L/cm, 4x 200 L/cm , 2x 320 L/cm , 3x 400 L/cm   200 sleeves repeat between 390 mm and 1090 mm ( 8 for each following repeat x 390 , 400, 410 , 420 , 430 , 450 , 480 , 510 , 530 , 540 , 550, 630 , 660 , 670, 740 , 780 , 800 , 850 , 880 , 930 , 990 , 1030, 1050 , 1090 + 8 twinlock 740 mm + 8 twinlock 1030   Mandrels for sleeve s 6 x360 , 6x 400 , 6x 420 ...

Filter control valve, switch-on valve, maintenance unit, water separator -Maintenance unit: with pressure regulator, filter and oiler -Dimensions: 230/260 / H70 mm -Weight: 2 kg

Filler, dosing computer terminal, dosing device, doser, compressed air vacuum control -Manufacturer: Hamatech, dosing device compressed air vacuum control -Type: unfortunately without type designation -Individual components: see photos -Dimensions: 330/245/H145mm -Weight: 4.8 kg

Diaphragm pump, compressed air diaphragm pump, chemical pump, compressed air-operated double diaphragm pump -Diaphragm pump: Air-operated double diaphragm pump -Type: unfortunately without type designation -Flow rate: l/min -Discharge pressure: bar -Total dimensions: 300/250/H325 mm -Weight: 9.9 kg

The technical data are manufacturer or operator information and are therefore non-binding for us. We reserve the right to sell the goods prior to the event, our terms and conditions of sale apply exclusively. About us More than 400 of our own machines in stock Over 12,000 m² of storage space, crane capacity 70 t More than 1,000 items of accessories for your workshop If you want to sell machines, production lines or your business, then contact us. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Capacity: 1.100 Ltr. Operating pressure: 5.0 bar, with technical documentation Year of Make: 1987 Manuf.: Binder, Crailsheim Material: stainless steel, 1.4301 Design: Cylindrical sthd, on 3 feet, outlet with disc valve DN 32, pulled down cleaning line with spray head and pressure fitting, sample tap, disc valves DN 32, manhole cover last use: beer Height approx. 2,280 mm (with cleaning line) Diameter: approx. 900 mm Prices plus VAT. VAT, from our warehouse, free truck loading!

Manufacturer: Sabore, Type: Drucklufttrockner SD 31 A, Year: 1994, Final compressed pressure bar: 16, Drive power kW: 0,17, Year :1994

Manufacturer: Heesemann Druckbalken war noch eigebaut, Type: MFA 6 oder MFA 8 , FREETEXT1: Hubmagnet 6 mm, FREETEXT2: 24 Volt, FREETEXT3: Länge 1470 mm, FREETEXT4: Bauhöhe 200 mm,

Manufacturer: Lohenner Druckluftkessel, Year: 1990, Compressed air boiler litres: 1000, Wight approx. kg: 400, Year :1990

Manufacturer: Elektronikkarte Heesemann Kuhnke Rollensteuerung, Type: für Heesemann Druckbalken signale, FREE TEXT: Rollensteuerung 42444100,

On behalf of a customer, we are selling an HP JetFusion 3D printer as a spare parts carrier., Included:, - 22x 4KG PA12 (NEW), - 3x Fusing agent, - 6x Detailing agent, - 1x Bright Fusing, - 1x SERV ASSY-MCB-V5 PN: M2K85-67391, - 1x SERV ASSY-CABLE-PEN CARRIAGE POS CHE PN: M2K85-67388, - 1x SERV ASSY RELAY CONTROL PCB PN: M2K85-67103, - 1x SERV ASSY-PCA-CLEAN AIR PN: M2K86-67235, - 1x SERV ASSY ECHAIN v2 PN: M2K85-67298, - 1x SERV ASSY PLATFORM SEALS PN: M2K86-67024, - 2x SERV ASSY-EXHAUST HOSE / Extraction hose PN: M2K86-67073, - 1x SERV ASSY-FUSING CARRIAGE DRVE PN: M2K83-67007, - 1x SERV ASSY CABLES BUCKET PN: M2K85-67175, - 1x SERV ASSY-EXHAUST FAN BUNDLE PN: M2K85-67263, - 1x Air Exhaust Filter PN: 8WA29A, - 1x SERV ASSY-ADS CHAIN-V2 PN: M2K86-67289, technology: HP Multi Jet Fusion Technology, Effective construction volume: Up to 332 × 190 × 248 mm, build speed: 2,199 cm 3 /hou ...

For sale is a used HP Multi Jet Fusion 540 3D printer. The HP Jet Fusion 540 is known for its reliability, efficiency, and high-precision results. Its ideal for small to medium production runs and is perfect for prototyping, functional parts, or complex design requirements., The device was purchased for R&D purposes to print prototypes during development. Throughout its lifetime, it was used only lightly—on average, about once a week. The printer is therefore in very good condition., Special features:, • Efficient material utilization: Up to 80% of the material can be reused, reducing printing costs. The machine automatically mixes the old and new materials., ● High precision: Ideal for industrial applications where precision detail and dimensional accuracy are required., ● Easy to use: User-friendly interface and software simplify the workflow., Condition and mainten ...

Used 3D printer: HP Jet Fusion 580 – industrial-grade color multijet technology, Immediately available and ready for use. Installation service, commissioning, and training available., For sale is a used HP Jet Fusion 580 3D printer in very good condition. The machine is fully functional, regularly serviced and is ideal for professional applications in prototyping, design, product development and small series production – especially where Color parts with high strength and precision are required., ---------------------------------------------------------------, Highlights of the HP Jet Fusion 580:, - Color 3D printing: Print functional components in Full color (CMYK) – ideal for illustrative prototypes and visualization., - High level of detail: Finest resolution for delicate geometries and complex structures., - Fast printing process: HP Multi Jet Fusion technology for sho ...

Year of construction unknown suitable for Heidelberg SM 102 Printing unit protection operating side SM 102 curved design Drupa 2008 Delivery date: immediately from stock Price on request. We supply and install worldwide.

Replacement column for IDRA 3300, D330mm x 7350mm, (5), PR11708354, die-cast servive, overhauled Special price If you have a VAT number, we will be happy to issue you an invoice without VAT. Replacement column 5 for IDRA 3300, D330mm x 7350mm, trapezoidal thread TR 330 x 10, 4932 kg Refurbished! The column was overhauled by the company Strate, is in the original packaging and is in an immediately usable, top condition. We store them in a dry and thermally insulated room. The column can be viewed, checked and picked up at any time. We will also be happy to send you a sketch of the execution or deliver the goods to your address. Attention: We offer various columns, adjustment nuts, spar nuts and 2 piece nuts of: IDRA D330, D300, D260, D250, Oleopress/OP Die Casting: D285, D250, Naughty: D375, D330, D300