drilling rig used for sale

Radial Drilling GSP 49S22 Spindle: Ø 125 mm Cone CM6 Spindle exit: 600 mm Spindle speed: from 17 to 1050 RPM Arm travel: 1800 mm Maxi height column travel: 1800 mm Column diameter: 600 mm Total column height: 3000 mm Spindle motor: 11 kW Drilling/tapping function Mechanical locking of the column Hydraulic locking of the trolley Auto descent Delivered with one cube dimensions: L 800 x W 560 x H 600 mm Table size: L 3300 x W 1400 x H 320 mm Voltage: 380 V Total weight: 12 T

Well drilling rig, drilling mount, UNIMOG drilling rig, UNIMOG drilling rig -Well drilling rig: on Mercedes Benz UNIMOG 4x4 with truck tandem trailer -Unimog: Mercedes Type 435 built in 1976, mileage: 97,243 km -Trailer: Schmid type MTT500 built in 1991 -Drilling rig: drilling power turret U 58 (company AGBO) torque 1700 Nm, speed 140 min -Linkage tensioning device: up to 165mm -22 boring bars: Ø 76mm length 4 m total length 88 meters -Theoretical drilling depth: 150 meters (depends on the soil and diameter of the drill hole) -1 flushing pump: Hatz 30C 30L, with Reno standard block pump type 65-250/263, 100m³/h, 8.9 bar -Price/tax: complete -Dimensions: Truck 6250/2300/H3350 mm / Trailer 6300/2400/H3050 mm -Total dimensions: 11300/2400/H3350 mm -Weight: kg

ID2285 Clamp Rod Magazine/Rod Magazine Rod magazine for drilling rig, 3-shaft magazine Boom magazine for drilling rig, 3-bay magazine

CNC double-staender coordinate drilling rig with deep drilling support Kolb KBN G 120 year 1984 / Converted to Heidenhain TNC 426 in 2006 table size 4250 x 2200 mm Table load 14 t Table laengsweg X 3000 mm Main Spindle crosspath Y 2180 mm deep drilling spindle crossing path A - 2000 mm spindle vertical path 500 mm Distance between the stems 2640 mm; spindle - table 100 - 1300 mm; spindle diameter 224 mm Spindle drive power 46 kW spindle speeds 14 - 1400 rpm spindle holder ISO 50 Drilling in steel ST60: 100 mm diameter; drill up to 300 mm; threaded cutting up to M 125 x 3; frard power 730 cm3r/min.; SECOND SUPPORT SUPPORT: spindle speeds at BTA and ELB drilling 315 - 3150 rpm high high pressure oil Offer number V(B)-5234; Very good

ID2932 Atlas Copco ROC L6-44 year/Year of construction 2007 approx. 11860 hours/hours 21 t Blast hole drill, 11860 operating hours, 5420 compressor hours, working pressure 25 bar, CAT motor, many accessories optionally available (drilling tube 89 x 5000 mm, Mincon 3.5 "MP35 down-the-hole hammer, ballistic drill bit D105 etc.), optionally with spare parts dispenser machine ( Engine damage), year of construction 2001 Blast hole drilling rig, 11860 operating hours, 5420 compressor hours, working pressure 25 bar, CAT motor, optionally many accessories available (drill pipe 89 x 5000 mm, down-the-hole hammer Mincon 3.5 " MP35, drill bit D105 ballistic etc.), optionally with spare parts dispenser machine (engine damage), year of construction 2001

Pneumatic drilling rig, pneumatic drilling machine, pneumatic tool ROCKWELL INTERNATIONAL MODEL 21L8020 POWER TOOL DIVISION Operating pressure: 90 PSI ( approx. 6,6,2 bar ) spindle speed: max. 3500 rpm spindle stroke: 40 mm tool holder: chuck 0 - 6.5 mm internal tool lubricators used, checked! Dimensions: 345 x 60 x 115 mm

ID2487 Eurodrill CDH 2400 year/Year of construction 2008 1.4 t Double-head drilling rigs, ready for use, little used (approx. 500 hours) Double-head drilling rig, ready for use, little used (approx. 500 hours)

Hydraulic drilling rig CHRISTENSEN DIAMOND PRODUCTS GmbH Type HB Motor: DANFOSS OMR 160 151-0213 Tool holder: Thread diameter: Ø 31,5 mm, pitch: 3.5 mm, length: 48 mm mounting flange: 178 x 152 mm, hole spacing: 147 / 108 mm, 4x bore: Ø 13 mm with claw coupling for cooling water supply used, checked! Dimensions: 600 x 180 x 170 mm

Hydraulic drilling rig BOSCH Motor: 0 511 625 302 ( 0511625302 ) Tool holder: Thread diameter: Ø 31.5 mm, pitch: 3.5 mm, length: 42 mm shaft housing: Ø 75 mm, 120 mm height adjustable arm length: 175 mm mounting flange: 70 x 83 mm, through thread: M12 x 1.75 with claw coupling for cooling water supply used, tested ! Dimensions: 550 x 180 x 270 mm

UNION Model: BFT 90/3 Manufacturer: UNION - Germany Model: BFT 90/3 Year of manufacture: 1982 Condition: very good, complete, no broken or missing parts Technical details: Spindle diameter: 90 mm Spindle taper: Morse'a 5 Working surface: 1400 x 1250 mm X axis travel: 1600 mm Y axis travel: 1250 mm Z axis travel: 1475 mm W axis travel: 710 mm Max. load on table: 2500 kg Installed power: 23 kW Machine weight: 9300 kg

CNC Boring Machine SKODA Model: W 160 Year of manufacture: 1968 Condition: very good, complete, in 2008 completely modernized with ball screws,linears, control system and full machine review - geometry CNC Control: CNC SIEMENS 840 Equipment: Universal head, Rotary table, additional equipment Technical details: Table size: 11 025 x 4 000 mm Working travel: X axis travel: 10 000 mm Y axis travel: 3 150 mm Z axis travel: 1 600 mm B axis travel: 360 Rotary table: 2 000 x 2 000 mm Max weight on rotary table: 20 000 kg Spindle diameter: 160 mm Spindle r.p.m: 800 r.p.m Tool shank: MORSE'A 6 with reduction on ISO 50 Machine weight: 80 000 kg

Controls: Heidenhain TNC 360 (1992) Table size: 1,000 x 1,000 mm Table size with extension: 1,345 x 1,000 mm Table load max.: 2,000 kg Distance between the s distance Spindle to table top: 0 - 1,100 mm Travel distances: X 1400 mm Y 900 mm Z 850 mm W 370 mm spindle holder: MK 5 spindle drive power: 6 kW spindle speeds: 30 - 1,500 rpm Drilling spindle diameter: 82 mm drill diameter: 2 - 70 mm Drilling tools Diameter: 17 - 450 mm Drilling capacity to full ST60: 45 mm Drilling capacity to full GG: 70 mm Zubehoer: drills; tools; usw. machine was rebuilt in 1992 and !; Very good

see side sheet below, with 2-spindle drill head Franz X. LINDNER SBS-2/2, spindle distance 300 mm, (translation 1:1)

work piece width: 200 mm workpiece height: 100 mm bore diameter: 10 / 20 mm saw blade diameter: 350 x 32 mm turning speeds: 3000 U/min : 100 x 100 mm Capacity 90° rectangular: 170 x 60 mm capacity 90 degrees: round: 100 mm work height max.: 970 mm Cutting height: max. 100 mm total power requirement: 1,9 kW weight of the machine ca.: 260 t dimensions of the machine ca.: 1400 x 850x 970 m Description: The ALU FRONT-450 is a double bevel machine with a swivel range of 45 ° left and 22.5 ° right and an automatic miter adjustment via stop functions. The saw stroke runs automatically and the material is pneumatically tensioned. The saw blade (450 x 30 mm) runs horizontally! Features: automatic mode Double miter right / left Saw stroke from bottom to top Carbide saw blade Saw speed adjustable length stop air pistol Minimal quantity cooling lubrication including sepia leaf The data for thi ...

Pitch Drilling Device, Drilling Device WMW Size: 340 TGL 38703 Dividing Head: Table diameter: Ø 340 mm Table height: 135 mm Slot width: 12 / 21 mm Groove depth: 20 mm Centering hole in table: Ø 63 mm, with adapter plate Ø 50 / 155 x 5 mm Drill bush carrier: Drill bush holder: Ø 40 mm, adjustment range: 0 - 140 mm Height adjustment range: 21 - 226 mm for drill bushings: Ø 6 mm - Ø 22 mm further information under https://katalog.ub.uni-weimar.de/tgl/TGL_38703_05-1981.pdf used, tested ! Dimensions: 580 x 500 x 400 mm

Pneumatic drill, pneumatic angle drill, corner drill, pneumatic tool SPITZNAS Type 2.2101 GTS 45 W operating pressure: 6 bar tool holder: MK4 with disengagement spindle with claw coupling, lever valve and tool lubricators used, tested ! Illustration may differ ! Dimensions: 630 x 120 x 240 mm

Year: 2003 - technically efficient, ready to work - after full service - for the upper and lower hinge - centering the element - SPS control

- technically efficient, ready to work - after full service - 4-spindle - bumpers (right + left)

C&S Crathern & Smith- rigid box machines 2 machines sets for bottom and cover in one production cycle 2 x automatic gluing machines: CSG-1 2 x thermoplastic quad stayer QA-200 2 x automatic vision box spotter CSV-1 year 1997

built 1984, 800 mm diameter, 1.400 mm cylindrical part, 570 mm cone height, 1 vacuum filter with bag charging hopper, filtering surface 2,3 m², 3 blow through cellular wheel sluices 150 mm x 150 mm for feeding a conveying system.

RECON Part number: 1230 2144 Please note: we also have other various RECON parts of different manufaturers / types in stock. We are pleased to provide you with our current stock list. ---------------------------------------------------------------------- ----------- If you have any further questions do not hesitate to contact us

Driven roller conveyor that can be rotated at right angles (90 degrees) by motor drive - used - Price (net) from location: only 1.500.-€, dismantled and loaded! Manufacturer: should be Siemens Dematic Built: Type: Length of roller conveyor: approx. 1,645m Wide element approx. 75cm Roll length: approx. 60cm Roll width: approx. 5cm Distance between rolls approx.: approx. 5cm Height: approx. 55cm Engine: SEW Length frame: one side approx. 2m, other side unknown (but can be changed anyway by the aluminium profiles Condition: good Available: now Location: Zwickau, later Frankenberg camp (Saxony)

Outside mirror on the right -Mechanical right wing mirror -for: Renault Kangoo -No.: 7700354637

With articulated carrier DC26, load: 108kW, max. driving speed 16km/h, tyre size: 14.00 R24 A, 2x drill arm BUT 35, Diesel Power Generator Deutz BF4M 1013C, drill mounts BMH 6414, max. drill rod length: 4321mm, max. drilling depth: 4020mm, loading platform HL 210, CE standard, air/water flushing, heat exchanger and high-pressure pump Swellex, without drill hammers.

The StyleShoots Horizontal, designed for flatlay product photography, contains a Canon EOS 5D Mark III with a Canon EF 24-105mm f/4L IS USM lens. Length: 2820mm, width: 2160mm, height: 2600mm, very little documentation available, an inspection is possible.

Length: 4100mm, width: 2050mm, height: 4100mm, very little documentation available, an inspection is possible.

Reference ID PP-27726 Category Rigid Box Manufacturer Emmeci Model MC2004 MEB Year Built 2008 Color - Impression - Working Hours - Speed - - size 600x400x190mm Min. Size 83x31x12mm Condition Good Location Europe Availability Immediately Machine Description Suction belt width: 720mm Speed cycles/min: 36 Roll diameter corner lock : 400mm dimension d. Cuts: min. 180x95mm, max. 900x760mm Box format: min. 83x31x12mm, max. 600x400x190mm

Angular gears, gearboxes VOGEL MH 23 ( MH23 ) i = 1,0 A. - No.: R 5454 001 Hollow shaft diameter ( drive ): Ø 28 mm Shaft length: 65 mm Groove width: 8 mm Flange diameter (drive): Ø 130 / 200 mm bolt circle diameter: Ø 165 mm hole diameter: Ø 10,5 mm Hollow shaft diameter ( output ): Ø 32 mm Wavelength: 174 mm groove width: 10 mm all hole spacing (housing): 110 mm all threaded holes: M10 x 1.5, Depth: 25 mm used, checked ! Dimensions: 290 x 200 x 200 mm

Label dispenser Macro SP12 right side RA1956 Manufacturer: Schwinn Model: Macro SP 12 Year of manufacture: 2018 Alignment: right Label passage: up to 115 mm Label speed: 1-18 m/min Maximum diameter label roll: 300 mm Core diameter 40 mm expandable with adapter Power supply: Euro plug 230/50Hz Integrated control with control parameters, controllable inputs and outputs, fault messages,... Additional equipment: Start triggering external AP 010-500 Vacuum Applicator Module Maintenance - equipment - combination Core adapter AP 031 Prewarning - label supply Mounting frame Control box Warning light, 3-stage Features: nominal voltage: 50Hz, 230 maximale Etikettengröße: 115 Etikettengeschwindigkeit: 1-18 m/min Kerndurchmesser Rolle: 40 mm maximale Größe Etikettenrolle: 300 Etikettendrucker enthalten?: NEIN Etikettenaplikator?: Stempel Vorwarnung Etikettenvorrat: JA Hub Aufklebestempel: 500 m ...

Transnorm curved belt conveyor right 40°-780-600 RA1848 Make: Transnorm Running direction: 40° right running belt conveyor width (RB): 600 mm Nominal/outer width (NB): 780 mm Inner radius (IR): 600 mm V230/400 kw 0,37 Height frame: 280 Scope of delivery:with motor, without supports (please enquire if required) Optionally available: Supports Side guide one and both sides frequency inverter Features: Construction year: 1996 condition: good (used) Nominal / inner radius in mm: 600 Nominal / outside width in mm: 780 Belt width in mm: 600 angle: 40° Driven: YES Running direction: RIGHT Engine type: SEW Eurodrive KW: 0,37/S1 Conveyor speed m / s: 0,92 scope of delivery: without supports and side guides For individual, expert advice, simply get in touch with us. Simply contact us by phone or email. We will be happy to help you plan and implement your projects. We look forward to hearing  ...

Transnorm belt curve conveyor left GKF 70°-730-600 IR600 RA1936 The Transnorm belt curve is fully functional. It has a gear motor of the brand SEW. Supports and are not included in the scope of delivery. They are optionally available on request. Belt curves are often used in intralogistics for the internal transport of unit loads and are indispensable in modern distribution centers. Transnorm belt curves convince with performance and reliability. Thanks to a low-tension drive over the entire belt width, long operating times are no problem. Conical drums and a specially developed belt guide system ensure the highest possible running smoothness. Technical data: Frame width (NB): 730 mm belt width (GuB): 550 mm height (BH): 210 mm Inner radius (IR): 600 mm Conveying angle: 70° degrees support feet: optionally available Conveying speed (v m/s): freely adjustable with frequency converter b ...

Transnorm curved belt conveyor right 35°-780-600 IR600 RA1825 Make: Transnorm Running direction: 35° right running belt conveyor width (RB): 600 mm Nominal/outer width (NB): 780 mm Inner radius (IR): 600 mm 3x 300-500V Height frame: 280 Scope of delivery:with motor, without supports (please enquire if required) Features: Construction year: 2001 condition: gut Nominal / inner radius in mm: 600 Nominal / outside width in mm: 780 Belt width in mm: 600 angle: 35° Driven: YES Running direction: RIGHT Engine type: SEW Eurodrive scope of delivery: without supports and side guides For individual, expert advice, simply get in touch with us. Simply contact us by phone or email. We will be happy to help you plan and implement your projects. We look forward to hearing from you. With kind regards Your team at Dr. Sonntag GmbH & Co. KG Your specialist and contact for intralogistics

Transnorm curved belt conveyor right 90°-780-600 RA1826 Make: Transnorm Running direction: 90° right running belt conveyor width (RB): 600 mm Nominal/outer width (NB): 780 mm Inner radius (IR): 600 mm V 220/380 Conveying speed: 1.05m/s Height frame: 210 Scope of delivery:with motor, without supports (please enquire if required) Features: Construction year: 1990 condition: gut Nominal / inner radius in mm: 600 Nominal / outside width in mm: 780 Belt width in mm: 600 angle: 90° Driven: YES Running direction: RIGHT Engine type: SEW Eurodrive KW: 0,37/S1 Ampere: 1,00, 1,75 scope of delivery: without supports and side guides For individual, expert advice, simply get in touch with us. Simply contact us by phone or email. We will be happy to help you plan and implement your projects. We look forward to hearing from you. With kind regards Your team at Dr. Sonntag GmbH & Co. KG Your specia ...

Transnorm belt curve conveyor right GKF 22.5°-850-650 IR1200 RA1523 The Transnorm belt curve is in good condition (used) and fully functional. It has a gear motor of the brand SEW. Supports and are not included in the scope of delivery. They are optionally available on request. Belt curves are often used in intralogistics for the internal transport of unit loads and are indispensable in modern distribution centers. Transnorm belt curves convince with performance and reliability. Thanks to a low-tension drive over the entire belt width, long operating times are no problem. Conical drums and a specially developed belt guide system ensure the highest possible running smoothness. The pictures of the conveyor system shown here were taken in a logistics center while still installed. Technical data: Conveying length middle radius (NL): 726 mm Frame width (NB): 850 mm belt width (GuB): 650 mm  ...

Transnorm spiral helix belt curve conveyor right 90°-840-650 IR600 RA1869 The Transnorm belt curve is in good condition (used) and fully functional. It has a gear motor of the brand SEW. Supports and are not included in the scope of delivery. They are optionally available on request. Belt curves are often used in intralogistics for the internal transport of unit loads and are indispensable in modern distribution centers. Transnorm belt curves convince with performance and reliability. Thanks to a low-tension drive over the entire belt width, long operating times are no problem. Conical drums and a specially developed belt guide system ensure the highest possible running smoothness. Technical data: Type designation: Belt curve conveyor TS 1600-105 Frame width (NB): 840 mm belt width (GuB): 650 mm height (BH): 210 mm Inner radius (IR): 600 mm Conveying angle: 90° degrees Incline: 210 mm  ...

Transnorm curved belt conveyor right bend 125°-775-600 IR600 RA2012 Technical details: Manufacturer: Transnorm Type: Belt Curve 125° right TS 1500-100 Curved belt conveyor Year of manufacture: 2001 Angle: 125° Running direction: right inner radius (IR): 600 mm belt width (GB): 600 mm Speed: please contact, motor not yet mounted Belt type: smooth, KT36 Drive location: outside pulling Condition: good condition / fully functional Scope of delivery: without supports & sideguide (please inquire if required) Optional: supports & sidequides Price plus VAT ex central warehouse Dr. Sonntag GmbH & Co. KG 97076 Würzburg Features: condition: good (used) Nominal / inner radius in mm: 600 Nominal / outside width in mm: 670 Belt width in mm: 600 angle: 109° Driven: YES Running direction: RIGHT Engine type: SEW Eurodrive Conveyor speed m / s: 1,0 scope of delivery: without supports and side  ...

Transnorm belt curve conveyor left GKF 70° degrees-770-600 IR600 RA1415 The Transnorm belt curve is in good condition (used) and fully functional. It has a gear motor of the brand SEW. Supports and are not included in the scope of delivery. They are optionally available on request. Belt curves are often used in intralogistics for the internal transport of unit loads and are indispensable in modern distribution centers. Transnorm belt curves convince with performance and reliability. Thanks to a low-tension drive over the entire belt width, long operating times are no problem. Conical drums and a specially developed belt guide system ensure the highest possible running smoothness. The pictures of the conveyor system shown here were taken in a logistics center while still installed. Technical data: Conveying length middle radius (NL): 1100 mm Frame width (NB): 770 mm with Motor 940 mm be ...

Transnorm right flush roller conveyor 3470-1830-1450 RA1855 Make: Transnorm Basic dimensions: conical structure, 3470x1160-1830 mm Length: 3470 mm Nominal/external width (NB): 1160-1830 mm Roll length (RB): 160-450 mm & 640-1000 mm Frame height: 290 mm Currently set height: 640 mm Height of side guide: 410 mm Width (height) side belt 300 mm Roller diameter: 50 mm Roller pitch: 65 mm Including 8 feet Motor MOVI-Mot 3x300-500V 1,5kW Conveying speed: Features: Construction year: 2017 Conveying length in mm (NL): 3470 Optional erhältlich: Frequenzumrichter Electric data: 70Hz, 217 / 375 V Antrieb: Nord-Drivesystem Supports: 8 Bauhöhe in mm (BH): 290 Belt width in mm (GuB): 300 Height in mm: 640 Galvanized rollers: Ø = 50 mm scope of delivery: including supports and side guides, Kabel, ohne Frequenzumrichter Roll width in mm: 160-450, 640-1000 condition: Ausstellungsstück Roll division i ...

Transnorm belt curve conveyor GKF 3900-750-550 IR850 RA1382 The Transnorm belt curve is in good condition (used) and fully functional. It has a gear motor of the brand SEW. Supports and are not included in the scope of delivery. They are optionally available on request. Belt curves are often used in intralogistics for the internal transport of unit loads and are indispensable in modern distribution centers. Transnorm belt curves convince with performance and reliability. Thanks to a low-tension drive over the entire belt width, long operating times are no problem. Conical drums and a specially developed belt guide system ensure the highest possible running smoothness. The pictures of the conveyor system shown here were taken in a logistics center while still installed. Technical data: Type designation: Belt curve conveyor TS 1600-105 Conveying length middle radius (NL): 3900 mm Frame wi ...

Transnorm belt curve conveyor right GKF 20°-750-550 IR1300 RA1477 The Transnorm belt curve is in good condition (used) and fully functional. It has a gear motor of the brand SEW. Supports and are not included in the scope of delivery. They are optionally available on request. Belt curves are often used in intralogistics for the internal transport of unit loads and are indispensable in modern distribution centers. Transnorm belt curves convince with performance and reliability. Thanks to a low-tension drive over the entire belt width, long operating times are no problem. Conical drums and a specially developed belt guide system ensure the highest possible running smoothness. The pictures of the conveyor system shown here were taken in a logistics center while still installed. Technical data: Type designation: Belt curve conveyor TS 1600-105 Conveying length middle radius (NL): 640 mm Fr ...

Technical details: Manufacturer: Transnorm Type: belt curve 60° TS 1500 100 belt bend conveyors POS. 164 Year of construction: 1996 Angle: 60° Direction: Right Nominal radius: approx. 600 mm Width: 400 mm Usable width be expanded through fit the outer Guide Strap type: KT 58 Number: 1 x (article no. 20140058) Condition: Used / fully functional Color: Grey More information: incl. Guide Gear motor Manufacturer: SEW eurodrive Features: Construction year: 1996 condition: good (used) Nominal / inner radius in mm: 600 Belt width in mm: 500 angle: 60° Running direction: RIGHT Engine type: SEW Eurodrive scope of delivery: including side guides without supports Für eine individuelle, fachmännische Beratung setzten Sie sich einfach mit uns in Verbindung. Kontaktieren Sie uns einfach telefonisch oder per Mail. Wir helfen Ihnen gerne bei der Planung und Umsetzung Ihrer Projekte. Wir freuen u ...

curved belt conveyor curved belt 109° right Transnorm TS1500-100 second-hand machine Technical details: Manufacturer: Transnorm Type: curved belt 109° right TS 1500-100 belt bend conveyors Year of construction: 1999 Angle: 109° Direction: Right Nominal radius RN: 600 mm BN width: 600 mm Speed: v = 1.0 m/s Strap type: smooth, KT36 Drive location: outside pulling Condition: good condition / fully functional Please ask without support, if necessary. Price D-97076 Würzburg from central warehouse Transport dimensions: Lxwxh = 2.4 x 1.10 x 0.40 m Weight: 150 kg Features: condition: good (used) Nominal / inner radius in mm: 600 Nominal / outside width in mm: 670 Belt width in mm: 600 angle: 109° Driven: YES Running direction: RIGHT Engine type: SEW Eurodrive Conveyor speed m / s: 1,0 scope of delivery: without supports and side guides Für eine individuelle, fachmännische Beratung ...

curved belt 60° right Transnorm TS1500-80 Built in 2007 Direction: right Width: 500 mm Inner radius: 600 mm with guiding systems inside and out Drive location: outside pulling constant speed v = 0.75 m/sec. incl. 3 supports Features: Construction year: 2007 condition: very good (used) Nominal / inner radius in mm: 600 Belt width in mm: 500 angle: 60° Driven: YES Running direction: RIGHT Engine type: SEW Eurodrive Conveyor speed m / s: 0,75 scope of delivery: including side guides, including support with three feet Für eine individuelle, fachmännische Beratung setzten Sie sich einfach mit uns in Verbindung. Kontaktieren Sie uns einfach telefonisch oder per Mail. Wir helfen Ihnen gerne bei der Planung und Umsetzung Ihrer Projekte. Wir freuen uns darauf von Ihnen zu hören. Mit freundlichen Grüßen Ihr Team der Dr. Sonntag GmbH & Co. KG Ihr Spezialist und Ansprechpartner für Intralo ...

curved belt conveyor curved belt 30° right Transnorm TS1500-80 second-hand machine Technical details: Manufacturer: Transnorm Type: curved belt 30° right TS 1500-80 belt bend conveyors Year of construction: 2008 Angle: 30° Direction: Right Nominal radius/radius of indoor RN: 1630 mm BN width: 510 mm Total width: 640 mm Drive location: outside pulling installed power: 0.37 kW constant conveyor speed: v = 0.9 m/sec. Please ask without support, if necessary. Price D-97076 Würzburg from central warehouse Transport dimensions: L x W x H = 900 x 800 x 700 Weight (gross): 90 kg Features: Construction year: 2008 condition: very good (used) Nominal / inner radius in mm: 1630 Nominal / outside width in mm: 640 Belt width in mm: 510 angle: 30° Driven: YES Running direction: RIGHT Engine type: SEW Eurodrive KW: 0,37/S1 Conveyor speed m / s: 0,90 scope of delivery: without supports and si ...

curved belt conveyor curved belt 45° right Transnorm TS1500-80 second-hand machine Technical details: Manufacturer: Transnorm Type: curved belt 45° right TS 1500-80 belt bend conveyors Year of construction: 2008 Angle: 45° Direction: Right Nominal radius/radius of indoor RN: 2480 mm BN width: 700 mm Drive location: outside pulling installed power: 0.37 kW Please ask without support, if necessary. Price D-97076 Würzburg from central warehouse Transport dimensions: L x W x H = 1800 x 1100 x 600 Weight (gross): 120 kg Features: Construction year: 2008 condition: very good (used) Nominal / inner radius in mm: 2480 Nominal / outside width in mm: 800 Belt width in mm: 700 angle: 45° Driven: YES Running direction: RIGHT Engine type: SEW Eurodrive KW: 0,37/S1 Conveyor speed m / s: 0,5 scope of delivery: without supports and side guides Für eine individuelle, fachmännische Beratung ...

Transnorm curved belt conveyor right bend 90°-800-700 IR900 RA2080 Technical data: Manufacturer: Transnorm Condition: good (used) conveying angle: 90° nominal/external width (NB): 800 mm belt width (GB): 700 mm innerradius (IR): 900 mm overall height (BH): 210 mm motor height (MH): 450 mm Motor type: SEW gear motor, SA37/T DT71D4/TH Electrical Data: 380-500 V, 0,37 kW Conveying speed: 1x 0,67 m/s, 2x 0,25 m/s, 1x 0,33 m/s or 1x 0,83 m/s Scope of delivery: without supports (if required, please contact us) Optional: supports Side guides Frequency converter for stepless speed control Price plus VAT ex central warehouse Dr. Sonntag GmbH & Co. KG 97076 Würzburg Features: Construction year: 2008 condition: very good (used) Nominal / inner radius in mm: 900 Nominal / outside width in mm: 800 Belt width in mm: 700 angle: 90° Driven: YES Running direction: RIGHT Engine type: SEW Eurodrive KW ...

Transnorm belt curve conveyor GKF 1650-750-550 IR600 70° right RA1441 The Transnorm belt curve is in good condition (used) and fully functional. It has a gear motor of the brand SEW. Supports and are not included in the scope of delivery. They are optionally available on request. Belt curves are often used in intralogistics for the internal transport of unit loads and are indispensable in modern distribution centers. Transnorm belt curves convince with performance and reliability. Thanks to a low-tension drive over the entire belt width, long operating times are no problem. Conical drums and a specially developed belt guide system ensure the highest possible running smoothness. The pictures of the conveyor system shown here were taken in a logistics center while still installed. Technical data: Type designation: Belt curve conveyor TS 1600-105 Conveying length middle radius (NL): 1650  ...

Transnorm belt curve conveyor 90° degree right GKF 90°-750-550 IR600 RA1408 The Transnorm belt curve is in good condition (used) and fully functional. It has a gear motor of the brand SEW. Supports and are not included in the scope of delivery. They are optionally available on request. Belt curves are often used in intralogistics for the internal transport of unit loads and are indispensable in modern distribution centers. Transnorm belt curves convince with performance and reliability. Thanks to a low-tension drive over the entire belt width, long operating times are no problem. Conical drums and a specially developed belt guide system ensure the highest possible running smoothness. Technical data: Type designation: Belt curve conveyor TS 1600-105 Conveying length middle radius (NL): 1805 mm Frame width (NB): 750 mm belt width (GuB): 550 mm height (BH): 210 mm Inner radius (IR): 600 m ...

Gebhardt roller curve conveyor 90° right 610-550 with 2x straight piece RA1282 The Gebhardt roller curve is from 2007 and in a very good (used) condition. It has an engine of the brand SEW. Supports are included in the scope of delivery. Technical data: Manufacturer: Gebhardt Type: 314.01 Position: 014.15 Built: 2007 Condition: very good (used) Engine: fully functional Angle: 90° Inner radius (IR): 850 mm Nominal/outer width (NB):610mm Usable width (NUB): 550 mm Length straight frame: 1 x 300 mm + 1 x 150 mm Engine Type: SEW Gear Motor Engine Power: kW 0.37/S1 Hz 50 A 2.00/1.15 Funding speed: 0.37 m/sec Drive: Head drive Rolls: Type: G6/50 sliding bearing with conical plastic molded part Weight: 110kg Scope of delivery: with supports 670 mm total high Price plus VAT from central warehouse Dr. Sonntag KG 97076 Würzburg Payment: after invoicing with advance payment Deliver ...

Dematic roller curve right or left 90° with straight section 2315-600-540 IR795 RA1643 Make: Dematic Running direction: 90° right running/ left running Roller width (RB): 540 mm conical, plastic coating Nominal/outer width (NB): 600 mm Inner radius (IR): 797 mm length: 1790mm + 525 with straight section 3x 300-500V Height frame: 132 Height including motor: 275 Gear motor: SEW WF20 DT71D4/Z/MM03/BW1 Conveyor speed: freely adjustable between 0,142 and 1,42 m/s with frequency converter Scope of delivery: without supports (please enquire if required) Features: Construction year: 2001 condition: good (used) Nominal / inner radius in mm: 795 Nominal / outside width in mm: 600 Roll width in mm: 540 angle: 90° Driven: YES scope of delivery: without supports and side guides For individual, expert advice, simply get in touch with us. Simply contact us by phone or email. We will be happy to  ...