136,842 used machines on RESALE, but how to find them? Machine Search
Year of manufacture: 1999 Serial number: 1137 Hour meter: 4,468 h Numerical control: Heidenhain TNC 310 (3 axes controlled) Longitudinal stroke (X): 1,000 mm Transverse stroke (Y): 450 mm Vertical stroke (Z): 600 mm Table dimensions: 1,000 x 450 mm Permissible load on table: 500 kg Spindle taper: ISO 40 Rotational speed: up to 4,000 rpm (depending on variation ranges) Spindle motor power: 6.6 / 9.3 kW Overall dimensions (L x W x H): 2,300 x 2,300 x 2,400 mm Total weight: approx. 3,200 to 3,500 kg Disassembly and loading costs: €300 Auction-ID: A1-50714-4202
used
General2-Axes Universal Turning Center with driven tools, C-axis; Control: DMG MORI Slimline Fanuc i Series Working areaSwing diameter over guide ways700 mmClamping chuck diameter max.315 mmWork spindle (left)Spindle bore91 mmBar diametre80 mmSpindle diametre on front bearing130 mmMain drive 1Drive power (100% DC)17 kWDrive power (40% DC)25,5 kWSpeed range- 4000 rpmTorque (100% DC)283 NmMax. torque (40% DC)426 NmC-Axis Speed-200 rpmSlide 1Longitudinal stroke830 mmTransverse stroke271 mmTool holder 1Number of tool stations12 Shank diametre according to DIN 6988040 mmNumber of driven tools12 Speed max.-4000 rpmPower max. (40% DC)5,44 kWFloor space/WeightDimensions (L x W x H)3,26 x 2,44 x 1,95 (4,3 x 2,44 x 1,95) mWeight approx.6500 KgPre-setting PackagePre-setting package: Option includes: - tool pre-setting probe MARPOSS - chip conveyor with right side discharge instead of chip tank - s ...
x-travel: 730 mm y-travel: 730 mm z-travel: 850 mm control: MSX 701 IV MAPPS 4 Main spindle:: max. spindle speed: 14.000 min/-1 power capacity - milling spindle: 22 / 18,5 kW tool taper: HSK A-63 distance ground floor - table top edge: 1.200 mm distance Spindlenose and center of table: 100 - 950 mm pallet changer:: numbers of pallets: 2 size of pallet: 500 x 500 mm max. workpiece weight: 500 kg max. workpiecediameter: 800 mm max. workpiece height: 1.000 mm change time of pallets: 7 sec Indexing-time: 1,57 sec B-axis (table): 0,001 ° Tool-Presetter:: number of toolpositions: 120 pos. tool taper: HSK A-63 max. tool diameter: 70 mm max. tool-dia with free toolbox: 140 mm max. tool length: 500 mm max. tool weight: 12 kg feeds:: rapid traverse: 50 m/min feed speeds: max. 50.000 mm/min Tipp feed: 0 - 1.260 mm/min total power requirement: 51 kVA weight of the machine ca.: 12 t dimensions o ...
x-travel: 2.600 mm y-travel: 700 mm z-travel: 700 mm control: iTNC 530 Heidenhain Main spindle:: turning speed range - main spindle: 20 - 18.000 min/-1 power capacity - main spindel: 35 / 25 kW tool taper: SK 40 work table:: table surface area: 2.900 x 700 mm max. table load: 2.150 kg tool magazin:: number of toolpositions: 30 pos. tool taper: SK 40 max. tool diameter: 80 mm max. tool-dia with free toolbox: 130 mm max. tool length: 300 mm max. tool weight: 6,0 kg feeds:: rapid traverse ( X / Y / Z ): 40 m/min feed speeds: max. 40.000 mm/min feed power: max. 8 kN total power requirement: 54 kVA weight of the machine ca.: 14,4 t dimensions of the machine ca.: 8,0 x 5,6 x 2,8 m Chip conveyor: Coolantsystem: high pressure coolant: 40 bar through spindle coolant: Rotary screen: 2x Signal-Light: paper band filter: interface 4. axis: indexing attachment: Hofmann - RWNC-220L tool setti ...
Offer a WMW 315/8 milling machine here. One of the best from Auerbach before the turnaround. Is in a good, fully functional condition. An identical machine is available if you are interested. (complete except for pulley and belt) X Y Z 500/400/400 Spindles Sk40 Year of construction 1988 Feeds infinitely variable, rapid traverse both have West German export control cabinets Connected load 8.5kw electr. Tool clamping in both axes Coolant Setup Speed 56-2800rpm Weight 1.9t per piece All circuit diagrams documentation included
x-travel: mm y-travel: mm z-travel: mm total power requirement: kW weight of the machine ca.: t required space: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
x-travel: 100 mm y-travel: 200 mm z-travel: 450 mm taper ISO: SK 40 turning speeds: 22 - 1400 U/min total power requirement: 7,5 kW weight of the machine ca.: 2,6 t dimensions of the machine ca.: 1,8 x 2 x 1.85 m 3-axis digital readout - Rapid traverse - Documentation The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Feed rate 8-400 mm/min, rapid traverse 1340 mm/min, incl. 3-axis digital display and hydraulic machine vice Auction-ID: A1-50626-5
UNIVERSAL MILLING MACHINE Inv. No. 12.315J1 Make INDUMA Model NL87 Serial number 75479 Table dimensions 2200 x430 mm Longitudinal travel (X) 1500 mm Cross travel(Y) 420 mm Vertical travel (Z) 530 mm Taper ISO 50 R.P.M. 36 – 1,350 (16x) HP 25 Volts 400 Cycles 50 Including: Universal Milling Head Coolant Auction-ID: A1-50718-26
CNC MILLING MACHINE Inv. No. 12.565J Make TOS Model FGS 40/50 CNC Mach. No. 43400083 Control Heidenhain TNC 355 Table 400 x 1,250 mm Longitudinal Travel (X) 850 mm Cross Travel (Y) 500 mm Vertical Travel (Z) 500 mm Taper ISO 50 R.P.M. 35 – 1.800 kW 7,5 Volts 380 Cycles 50 Auction-ID: A1-50718-62
CNC BED MILLING MACHINE Inv. No. 12.608LM Make RAMBAUDI Model VERSAMILL12 Control CNC PILOT GRUNDIG Mach. No. 82601 Table dimensions 1600x510 mm Longitudinal travel (X) 1.100 mm Vertical travel (Y) 820 mm Cross travel (Z) 620 mm Taper ISO 50 R.P.M. 22-2000 kW 8 Volts 380 Auction-ID: A1-50718-27
CNC UNIVERSAL MILLING MACHINE Inv. No. 13.165J1 Make MIKRON Model WF 31DCM Machine No. Control HEIDENHAIN TNC 155 Table dimensions 460 x 800 mm Longitudinal travel (X) 560 mm Cross travel(Y) 500 mm Vertical travel (Z) 400 mm R.P.M. 40 – 4000 Rapid traverse X-Y 4000 mm/min Rapid traverse Z 3500 mm/min Quill travel 90 mm kW total power 10 kW drive power 3.3 / 4 Machine weight 2540 kg Auction-ID: A1-50718-55
Control voltage 24 V, connected load 3.1 kW, rated current 25 A Auction-ID: A1-50626-34
UNIVERSAL MILLING MACHINE Inv. No. 13.147J1 Make TOS Model FA3AH Mach. No. 1854 Table 300 x 1,375 mm Longitudinal Travel (X) 890 mm Cross Travel (Y) 275 mm Vertical Travel (Z) 400 mm Taper ISO 40 R.P.M. 45 – 2.000 KW 4 Volts 400 Cycles 50 Including Coolant attachment Emergency stop Auction-ID: A1-50718-53
CNC MILLING MACHINE Inv. No. 13.112J1 Make HO-CHUN Type UH-1250A Mach.no. 5123 Control HEIDENHAIN TNC 360 Table 400 x 1,800 mm Longitudinal Travel (X) 1,250 mm Cross Travel (Y) 540 mm Vertical Travel (Z) 470 mm Spindle BT 50 R.P.M. 275 – 2.000 KW 7 Volts 380 Cycles 50 Auction-ID: A1-50718-51
Consisting of milling tools in various designs and sizes, weight 30 kg, without tool cabinet Auction-ID: A1-50626-21
Consisting of milling tools made of carbide and HSS in various designs and sizes, weight 30 kg, without tool cabinet Auction-ID: A1-50626-35
used
GeneralHigh dynamic Vertical Drill-Tap centre with best milling performance; Control: 3D-control Siemens 840D sl Operate Working area 1Longitudinal350 mmCross420 mmVertical380 mmTechnical DataFeed rate longitudinal/transverse/vertical60000/60000/60000 mm/minRapid traverse longitudinal/transverse/vertical60/60/60 m/minIntegrated swivel rotary table simultaneousIntegated swivel rotary table DMP 35 version 5-Axis simultaneous mode! Torque drives incl. direct measuring in A- and C-Axis Swivel range A-Axis -120 / + 100 degrees Max. load C-axis 100kg Table diameter C-Axis d290mm Rotary joint, 6-channels Inclusive So Tool magazine 25 placesTool magazine 25 places (suitable for inclusion in the tool spindle) Max. tool length 150 mm Chip-to-chip time 1.6 sec Note: machine width increases to 1410 mm! Spindle speed 24,000 rpmSpindle 24,000rpm with tool taper ISO 7388-2 - J30 BT30 / BBT 30 (BIG PLUS ...
x-travel: 5100 mm y-travel: 3500 mm z-travel: 1100 mm distance between columns: 2700 mm distance table - lower edge spindle: 200 - 1300 mm table-size: 5000 x 2600 mm table load: 17 t spindle motor: 37 /45 kW spindle turning speed range: 6000 U/min tool taper: BT 50 feed in x - axis: 12 mm/min feed in y - axis: 20 mm/min feed range Z-direction: 15 mm/min w-axis: mm control: Fanuc 0i-MF total power requirement: - kVA weight of the machine ca.: - t dimensions of the machine ca.: 13 x 8 x 5,5 m Portal milling machine equipped with: - CNC Control FANUC 0i-MF (10.4 LCD) - ATC 60-fold (BT 50) - X/Y axis roller linear guide way, Z axis box way - Auto head storage: -- 90 degree angle milling head - Coolant thru spindle 50bar - X/Y/Z axis linear scales - Spindle oil cooler - Oil skimmer - Air conditioner - Chip conveyor - Ball Screw Cooling X/Y/Z - Air Blast through Spindle The data for this ad ...
Manufacturer SORALUCE Model SP-8.000 Year of Manufacture 2008 CNC HEIDENHAIN iTNC 530 Table Table surface 10,000 x 1,100 mm Max. permissible weight on table 2,500 kg/m2 Tours Longitudinal (X-axis) 6,500 mm Transverse (Y-axis) 1,500 mm Vertical (Z-axis) 2,000 mm Fast Forward Axles 25,000 mm/min Head Automatic head 2. 5º / 2. 5º INCLUDED ISO 50 Head Cone DIN 69871 Head speed 20 – 4,000 r.p.m. No. of ranges 2 Main Motor Power 30 kW Automatic tool loader. Tool Loader Positions 60 Maximum diameter hta with adjacent positions occupied 125 mm. Maximum diameter with adjacent free positions 250 mm. Maximum tool length 400 mm. Maximum tool weight 20 kg Additional equipment Internal cooling 20 BAR INCLUDED Chip evacuator INCLUDED Heidenhain HR-410 Electronic Steering Wheel Additional tank with paper filter INCLUDED User platform INCLUDED SIEMENS DIGITAL mo ...
Carousel milling machine Comec FGS-1T CAB Number of generators 1 Milling motor power: 5.5kw Cutter Speed: 7050rpm Tool min/max 120-200mm Spindle Diameter 40mm Maximum cutter height 115 mm Diameter of the processed material min/max 110-800mm Table Rotation Motor Power: 1.5KW Table speed 1.65-8.8 rpm Machine Dimensions 1600×1700×2600mm Machine Weight 1500kg Net price
Carousel milling machine Comec FGS-1T CAB Number of generators 1 Milling motor power: 5.5kw Cutter Speed: 7050rpm Tool min/max 120-200mm Spindle Diameter 40mm Maximum cutter height 115 mm Diameter of the processed material min/max 110-800mm Table Rotation Motor Power: 1.5KW Table speed 1.65-8.8 rpm Machine Dimensions 1600×1700×2600mm Machine Weight 1500kg Net price
Horizontal and vertical milling machine; including manual vise jaw width 1550 mm; equipped with Heidenhain VRZ 750 electronic X-, Y-, Z-axis readout; central lubrication; including approximately 20 different SK 40 collet holders, of which with various tools including drills / mills; including 2 tool drawer cabinets with 6 and 8 drawers including various contents; Auction-ID: A1-50476-3
Heavy-duty end-milling machine for aluminium profiles, corresponding to the Hermis NR model. Equipped with a 2 HP motor, rotating vice, quick tool change, automatic spray lubrication, two pneumatic vices and a transparent safety guard. Auction-ID: A7-50988-15
HERMIS NR end-milling machine for aluminium profiles, display (showroom) model, reference N002/0961. Heavy-duty type with quick tool change. Has a vice that rotates in degrees and changes positions. Powerful 2 HP motor, automatic spray, two air vices for holding the profiles and a transparent safety guard. Technical specifications: Motor 2 Hp. Max. stroke 410 mm. Speed 3000 rpm. External dimensions 600 x 900 x 1200 mm. Weight approx. 100 kg. Display model, delivered with new machine warranty Auction-ID: A7-50988-14
GeneralUniversal Machining Centre in monoBLOCK construction; Control: CELOS with Siemens 840D sl Operate Technical DataFeed rate longitudinal/transverse/vertical40000/40000/40000 mm/minRapid traverse longitudinal/transverse/vertical40/40/40 m/minWorking area 1Longitudinal735 mmCross650 mmVertical560 mmTool changerTool changer planevertical Type of gripperDouble gripper Number of tools90 Max. tool length315 mmMax. tool diameter with occupied adjacent pockets80 mmMax. tool dia. with free neighbouring pockets160 mmFloor space/WeightWeight approx.12400 KgNC swivel rotary table integrated in rigid tableType of Measuring system Direct measuring system Table surface 800 x 650 (Ø 650) mmCentre bore 50 mmMaximum load (table centre) 600 KgSlot width 14 mmNumber of Slots 9 Distance between T-Slots 63 mmRotation speed max.4. Axis 40 rpm4. Axes (swivelling range) 360 x 0,001 degree5. Axes (swivellin ...
GeneralUniversal Machining Centre in monoBLOCK construction - MPC Machine Protection Control; Control: CELOS with Siemens 840D sl Operate Working area 1Longitudinal750 mmCross650 mmVertical560 mmTechnical DataDrive power (100% DC)25 kWDrive power (40% DC)35 kWTorque (100% DC)86 NmTorque (40% DC)130 NmSpeed range- 20000 rpmSpindle taperHSK-A 63 Feed rate longitudinal/transverse/vertical40000/40000/40000 mm/minRapid traverse longitudinal/transverse/vertical40/40/40 m/minTool changerTool changer planevertical Type of gripperDouble gripper Number of tools60 Max. tool length315 mmMax. tool diameter with occupied adjacent pockets80 mmMax. tool dia. with free neighbouring pockets160 mmMiscellaneousClamping SystemHSK-A 63 Floor space/WeightWeight approx.12300 KgNC swivel rotary tableTable surface 800 x 650 (Ø 650) mmCentre bore 50h6 mmMaximum load (table centre) 600 KgSlot width 14 mm4. Axes (s ...
GeneralUniversal machining centre; Control: Siemens 840D-Powerline ShopMill Classic Technical DataFeed rate longitudinal/transverse/vertical60000/60000/60000 mm/minRapid traverse longitudinal/transverse/vertical60/60/60 m/minWorking area 1Longitudinal1250 mmCross1000 mmVertical1000 mmMiscellaneousClamping SystemHSK-A 100 Tool changerApplicationUniversal Type of magazineChain Tool changer planehorizontal Type of gripperDouble gripper Automatic swivel milling headUniversal head: automatic changeover from vertical to horizontal machining Prod. package 40 bar/23 l/minCoolant through spindle centre form AD 40 bar/23 l/min / 580 psi/6 gallon/min (theoretical pump performance) clear-view rotating window Multi-jet unit at universal head, switchable from coolant to air (max. 6 bar / 90 psi) (6 water jets, 4 air jets) pump NC rotary table with pallet changerType of Measuring system Direct measurin ...
GeneralUniversal machining centre; Control: Siemens 840D-Powerline ShopMill Classic Technical DataFeed rate longitudinal/transverse/vertical60000/60000/60000 mm/minRapid traverse longitudinal/transverse/vertical60/60/60 m/minWorking area 1Longitudinal1250 mmCross1000 mmVertical1000 mmMiscellaneousClamping SystemHSK-A 63 Tool changerApplicationUniversal Type of magazineChain Tool changer planehorizontal Type of gripperDouble gripper Automatic swivel milling headUniversal head: automatic changeover from vertical to horizontal machining Prod. package 40 bar/23 l/minCoolant through spindle centre form AD 40 bar/23 l/min / 580 psi/6 gallon/min (theoretical pump performance) clear-view rotating window Multi-jet unit at universal head, switchable from coolant to air (max. 6 bar / 90 psi) (6 water jets, 4 air jets) pump NC rotary table with pallet changerType of Measuring system Direct measuring ...
GeneralUniversal Machining Centre in monoBLOCK construction; Control: CELOS with Siemens 840D sl Operate Technical DataFeed rate longitudinal/transverse/vertical40000/40000/40000 mm/minRapid traverse longitudinal/transverse/vertical40/40/40 m/minWorking area 1Longitudinal735 mmCross650 mmVertical560 mmTool changerTool changer planevertical Type of gripperDouble gripper Number of tools60 Max. tool length315 mmMax. tool diameter with occupied adjacent pockets80 mmMax. tool dia. with free neighbouring pockets160 mmFloor space/WeightWeight approx.14500 KgMotor spindle 20,000 rpmMotor spindle speedMASTER® SK 40 Spindle speed 20 - 20,000 min-1 Output 35 kW / 25 kW (47 hp / 33 hp) Torque 130 Nm / 86 Nm (96 ft lbs / 63 ft lbs) (40 / 100 % duty cycle) Tool magazine, chain vert., 60 pocketsTool magazine Vertical chain magazine basic with 60 magazine pockets SK 40 or optionally chosen spindle tape ...
GeneralUniversal Machining Centre in monoBLOCK construction; Control: CELOS with Siemens 840D sl Operate Technical DataFeed rate longitudinal/transverse/vertical40000/40000/40000 mm/minRapid traverse longitudinal/transverse/vertical40/40/40 m/minWorking area 1Longitudinal735 mmCross650 mmVertical560 mmTool changerTool changer planevertical Type of gripperDouble gripper Number of tools60 Max. tool length315 mmMax. tool diameter with occupied adjacent pockets80 mmMax. tool dia. with free neighbouring pockets160 mmFloor space/WeightWeight approx.14500 KgNC swivel rotary table integrated in rigid tableType of Measuring system Direct measuring system Table surface 800 x 650 (Ø 650) mmCentre bore 50 mmMaximum load (table centre) 600 KgSlot width 14 mmNumber of Slots 9 Distance between T-Slots 63 mmRotation speed max.4. Axis 40 rpm4. Axes (swivelling range) 360 x 0,001 degree5. Axes (swivellin ...
GeneralUniversal machining centre; Control: Siemens 840D-Powerline ShopMill Classic Technical DataFeed rate longitudinal/transverse/vertical60000/60000/60000 mm/minRapid traverse longitudinal/transverse/vertical60/60/60 m/minWorking area 1Longitudinal1250 mmCross1000 mmVertical1000 mmMiscellaneousClamping SystemHSK-A 63 Tool changerApplicationUniversal Type of magazineChain Tool changer planehorizontal Type of gripperDouble gripper Automatic swivel milling headUniversal head: automatic changeover from vertical to horizontal machining Prod. package 40 bar/23 l/minProduction package 40 bar/23 l/min / 580 psi/6 gallon/min (theoretical pump performance) tank 900 l, rotating clear-view window, scraper flight conveyor coolant through spindle centre form AD NC rotary table with pallet changerType of Measuring system Direct measuring system Table surface 1000 x 800 mmCentre bore 50H6 mmMaximum l ...
GeneralUniversal machining centre; Control: 3D Control Siemens 840D powerline Technical DataFeed rate longitudinal/transverse/vertical60000/60000/60000 mm/minRapid traverse longitudinal/transverse/vertical60/60/60 m/minWorking area 1Longitudinal1250 mmCross1000 mmVertical1000 mmMiscellaneousClamping SystemHSK-A 100 Tool changerApplicationUniversal Type of magazineChain Tool changer planehorizontal Type of gripperDouble gripper Automatic swivel milling headUniversal head: automatic changeover from vertical to horizontal machining Prod. package 40 bar/23 l/minCoolant through spindle centre form AD 40 bar/23 l/min / 580 psi/6 gallon/min (theoretical pump performance) clear-view rotating window Multi-jet unit at universal head, switchable from coolant to air (max. 6 bar / 90 psi) (6 water jets, 4 air jets) pump NC rotary table with pallet changerType of Measuring system Direct measuring syst ...
GeneralUniversal Machining Centre Vertical headstock Tool change system double gripper NC-Swivel rotary table with pallet carrier 3 pallets 500 mm x 500 mm / 19.7 in x 19.7 in T-slots according to DIN 55201-A2 linear pallet changer coolant tank 500 l / 132 gallon chip conveyor with netting band filter integrated, coolant ring jet; Control: CELOS with Siemens 840D sl Operate Technical DataFeed rate longitudinal/transverse/vertical40000/40000/40000 mm/minRapid traverse longitudinal/transverse/vertical40/40/40 m/minWorking area 1Longitudinal735 mmCross650 mmVertical560 mmFloor space/WeightWeight approx.17800 KgDirect measuring systemDirect path measuring system CabineFull protection cabin Package Mill / Turn HSK-A 63Package Milling / Turning: Upgrade NC-swivel rotary table to Milling - Turning / direct drive Pallet C-axis d 630 mm / 24.9 in Speed C-axis 1.000 rpm Integrated balancing senso ...
GeneralUniversal machining centre New DMG MORI Design; Control: CELOS with Siemens 840D sl Operate Technical DataFeed rate longitudinal/transverse/vertical50000/50000/50000 mm/minRapid traverse longitudinal/transverse/vertical50/50/50 m/minWorking area 1Longitudinal400 mmCross400 mmVertical375 mmTool changerType of magazineChain Type of gripperDouble gripper Number of tools60 Max. tool weight6 KgMax. tool length300 mmMax. tool diameter with occupied adjacent pockets80 mmMax. tool dia. with free neighbouring pockets130 mmFloor space/WeightDimensions (L x W x H)6,21 x 6,58 x 2,69 (6,21 x 7,38 x 2,69) mWeight approx.7200 KgDie and Mold Package linearDie and Mold Package linear Dynamic package V-type Eagle timing belt for Z axis Package Mill / TurnPackage Mill / Turn (only available for Siemens 840D solutionline) NC-Mill-turn table 450x450 mm / 17.7x17.7 in rounded down to d460 mm / 18.1 in ...
GeneralUniversal milling machine with duoblock construction; Control: CELOS with Siemens 840D sl Operate Working area 1Longitudinal800 mmCross1050 mmVertical850 mmTechnical DataFeed rate longitudinal/transverse/vertical60000/60000/60000 mm/minRapid traverse longitudinal/transverse/vertical60/60/60 m/minTool changerApplicationUniversal Type of magazineWheel Tool changer planehorizontal Type of gripperDouble gripper Number of tools123 Coolant supply ICSCoolant supply: coolant through spindle centre form AD 40 bar/23 l/min(theoretical pump performance) rotating clear-view window Multi-jet unit at universal head, switchable from coolant to air (max. 6 bar, 6 water jets, 4 air jets) pump output (theoretic Chip removalChip removal: 2 worm conveyors in the machine bed convey into a chip conveyor (scraper flight conveyor), with interval control, placed at right angles. discharge height: 950 mm / ...
GeneralUniversal machining centre New DMG MORI Design; Control: CELOS with Siemens 840D sl Operate Technical DataFeed rate longitudinal/transverse/vertical50000/50000/50000 mm/minRapid traverse longitudinal/transverse/vertical50/50/50 m/minWorking area 1Longitudinal400 mmCross400 mmVertical375 mmTool changerType of magazineChain Type of gripperDouble gripper Number of tools60 Max. tool weight6 KgMax. tool length300 mmMax. tool diameter with occupied adjacent pockets80 mmMax. tool dia. with free neighbouring pockets130 mmFloor space/WeightDimensions (L x W x H)6,21 x 6,58 x 2,69 (6,21 x 7,38 x 2,69) mWeight approx.7200 KgPackage Mill / TurnPackage Mill / Turn NC-Mill-turn table 450x450 mm / 17.7x17.7 in rounded down to d460 mm / 18.1 in C-axis direct drive, speed max.1,200 rpm Integrated balancing system Motorspindle 20-20,000 rpm power 35/25 kW (40/100% ED) tool taper HSK-A63 according D ...
GeneralTraveling column machine DMG MORI Design; Control: CELOS with Heidenhain TNC 640 Technical DataFeed rate longitudinal/transverse/vertical40000/40000/40000 mm/minRapid traverse longitudinal/transverse/vertical40/40/40 m/minWorking area 1Longitudinal1800 mmCross700 mmVertical700 mmTool changerType of magazineChain Number of tools30 Max. tool weight6 KgMax. tool length300 mmMax. tool diameter with occupied adjacent pockets80 mmMax. tool dia. with free neighbouring pockets130 mmFloor space/WeightDimensions (L x W x H)6,75 x 3,45 x 2,75 mWeight approx.14320 KgMiscellaneousClamping SystemDIN 69872 NC-swivel head (B-axis)Controlled NC-swivel milling head (B-axis) with clamping in position. Continuously positioning NC swivel milling head with integrated motor spindle for 4/5 axes positioning and simultaneous machining. Swivel range: +/- 90° Swivel speed: 40 rpm Fixed tableFixed Table Tab ...
GeneralUniversal Milling Machine Stealth Design; Control: CELOS X with HEIDENHAIN TNC7 Working area 1Longitudinal550 mmCross450 mmVertical420 mmTechnical DataFeed rate longitudinal/transverse/vertical30000/30000/30000 mm/minRapid traverse longitudinal/transverse/vertical30/30/30 m/mininlineMASTER® spindlespeed range 20 - 15.000 min-1 SK40 suitable for BIG-PLUS® tools Drive power (100% DC) 14,5 kWDrive power (40% DC) 20,3 kWTorque (100% DC) 84 NmTorque (40% DC) 121 NmSpeed range 20 - 15000 rpmSpindle taper HSK-A 63 Clamping System HSK-A 63 Toolchanger with set up station for tool loadingNumber of tools 30 IoTconnectorIoTconnector The IoTconnector allows the use of online services of DMG MORI (e.g. NETservice) NETserviceNETservice Qualified support by Internet-based remote diagnostics Messenger V4Messenger V4 Clear presentation of the machine live status. Service AgentService Agent Overv ...
GeneralVertical Machining Centres; Control: Control F0iMF CharacteristicsTable surface1400 x 560 mmMaximum load (table centre)1000 KgSpeed max.12000 rpmDrive power (100% DC)11 kWDrive power (25% DC)15 kWTool Magazine with60 PositionsSpindle taperBT 40 Movement X / Y / Z1100/560/510 mmRapid feed X / Y / Z36/36/30 m/minDimensions (L x W x H)3,19 x 2,76 x 2,94 (3,82 x 3,58 x 3,01) mWeight approx.5500 KgStandard spindle 12,000 min-1, 15/ 11 kWStandard Spindle 12,000 min-1, 15/ 11 kW Spindle speed: 12,000 min-1 Output: 15/13/11 kW (20/17.33/15 HP) (25%ED/30min/cont) Torque: 119/70/57 Nm (87.76/51.62/42.04 ft·lbf) (25%ED/30min/cont) Spindle Taper 7/24 Taper #40/ Grip MAS <BT40>Spindle Taper 7/24 Taper #40/ Grip MAS <BT40> This specification uses the spindle No. 40 7/24 taper / Grip MAS tool holder. The grip type and retention knob type of ATC are specified separately. Retention Kn ...
GeneralUniversal Milling Machine Stealth Design; Control: CELOS with Siemens 840D sl Operate Working area 1Longitudinal550 mmCross450 mmVertical420 mmTechnical DataFeed rate longitudinal/transverse/vertical30000/30000/30000 mm/minRapid traverse longitudinal/transverse/vertical30/30/30 m/mininlineMASTER® spindlespeed range 20 - 15.000 min-1 Drive power (100% DC) 14,5 kWDrive power (40% DC) 20,3 kWTorque (100% DC) 84 NmTorque (40% DC) 121 NmSpeed range 20 - 15000 rpmSpindle taper HSK-A 63 Clamping System HSK-A 63 Tool clamping for HSK-A63Tool clamping HSK-A63 according DIN 69893 (incl. adaptation working spindle and tool magazine) NC swivel rotary tableSwivel Rotary Table for simultaneous machining Clamping surface dia. 505 x 500mm / 19.9 x 19.6 in swivel range -35 to +110°, rotary axis 360° including direct measuring system for B- and C-axis and working plane transformation Tool magazi ...
GeneralUniversal Milling Machine Stealth Design; Control: CELOS with Siemens 840D sl Operate Working area 1Longitudinal550 mmCross450 mmVertical420 mmTechnical DataFeed rate longitudinal/transverse/vertical30000/30000/30000 mm/minRapid traverse longitudinal/transverse/vertical30/30/30 m/mininlineMASTER® spindlespeed range 20 - 15.000 min-1 SK40 suitable for BIG-PLUS® tools Drive power (100% DC) 14,5 kWDrive power (40% DC) 20,3 kWTorque (100% DC) 84 NmTorque (40% DC) 121 NmSpeed range 20 - 15000 rpmSpindle taper HSK-A 63 Clamping System HSK-A 63 Tool clamping for HSK-A63Tool clamping HSK-A63 according DIN 69893 (incl. adaptation working spindle and tool magazine) NC swivel rotary tableSwivel Rotary Table for simultaneous machining Clamping surface dia. 505 x 500mm / 19.9 x 19.6 in swivel range -35 to +110°, rotary axis 360° including direct measuring system for B- and C-axis and worki ...
GeneralHigh dynamic Vertical Drill-Tap centre with best milling performance; Control: 3D-control Siemens 840D sl Operate Working area 1Longitudinal350 mmCross420 mmVertical380 mmTechnical DataFeed rate longitudinal/transverse/vertical60000/60000/60000 mm/minRapid traverse longitudinal/transverse/vertical60/60/60 m/minMain driveDrive power (100% DC) 6 kWDrive power (40% DC) 8,5 kWTorque (100% DC) 41 NmTorque (40% DC) 48 NmSpeed range 20 - 15000 rpmSpindle taper BT 30 Clamping System ISO 7388-3 - JD30 Toolchangertoolchanger Type of magazine Wheel Number of tools 15 TableTable surface 740 x 420 mmMaximum load (table centre) 400 KgPreparation NC-Devider EA510 indirectPreparation 4.th axis Lehmann EA 510.L indirect measuring System Attention: Customer specific optimisations and adjustments are not part of delivery! Chip removal package with chip conveyorChip removal package with chip conveyor ...
GeneralVertical Machining Centre; Control: 3D control Heidenhain iTNC 530 Technical DataFeed rate longitudinal/transverse/vertical1-90000/1-90000/1-90000 mm/minRapid traverse longitudinal/transverse/vertical90/90/90 m/minWorking area 1Longitudinal885 mmCross600 mmVertical600 mmMiscellaneousClamping SystemHSK-A 63 Colour Floor space/WeightDimensions (L x W x H)4,9 x 4,3 x 3,2 mWeight approx.12000 KgCabineFull protection cabin DMC 75 V linear in 5-axes-versionAdditional price DMC 75V linear in 5-axes-version - motion in X=885mm und Z=600mm - spindle speed up to 18.000rpm, - tool-taper HSK-A 63, - swiveling range B-axis +10° to -110°, - swiveling speed B-axis 50rpm, - max. torque 750Nm / 553ft/lbs - clampi Tool magazine 150 pocketsTool magazine 150 pockets Tower type magazine Only available for HSK Tool holders. (differently from standard) Number of tools 150 Preparation measuring probe T ...
GeneralVertical-Machining centre Stealth Design; Control: CELOS X with Siemens 840D SL Operate CharacteristicsTable surface1460 x 750 mmMaximum load (table centre)1500 KgTool Magazine with40 PositionsMovement X / Y / Z1150/700/550 mmRapid feed X / Y / Z42/42/42 m/minWeight approx.12900 KgSpindle speed 20 - 12,000 rpm SK50, 288NmSpindle speed 20 - 12.000 rpm SK50 for tool taper according to DIN ISO 7388-1-A50 with power 44/32 kW // 59.0/42.9 hp with torque 288/187 Nm (40/100% DC) (differently from standard) Tool magazine 40 pocketsTool magazine 40 pockets SK50 chain magazine with pockets and double gripper, incl. manually direct loading into the tool magazine Coolant-air blast change-overCoolant - Air-blast changeover external switchable via M-Function Air blast through spindle centreAir blast through spindle centre activated by M function, maintained air with low oil rate Internal coolan ...
maximum number of results exceeded
please refine your search
250 € 
