drilling and milling used for sale

number of spindles: 4 bore capacity in steel (diameter): 25 mm bore stroke: 120 mm weight of the machine ca.: 0.85 t dimensions of the machine ca.: 1.55 x 0.65 x 2 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

bore capacity in steel St 60: 30 mm bore capacity in cast iron GG 20: 30 mm Drilling capacity in St 60: 30 mm threading in St 60: M 16 threading in GG 20: M 20 Short spindle: MK 3 spindle stroke: 140 mm throat: 293 mm column diameter: 115 mm Machine table - usable table surface: 514 x 360 mm T-Slots Amount - Width - Distance: 2 x 14 x 224 mm Distance spindle-table min.: 132 / 724 mm feed: von Hand spindle turning speed - stepless: 225 - 4300 U/min total power requirement: 1,0/1,6 kW weight of the machine ca.: 260 kg The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Nominal drilling depth 750 mm Full drilling in steel approx. 30 mm Spindle speed max. 5700 min-1 Clamping table 1280 x 420 mm Transverse Sliding Table Coolant tank Miscellaneous Accessories

bore capacity in steel (diameter): 30 mm throat: 275 mm bore stroke: 100 mm taper MK: 4 MK table-size: 420 x 340 mm feeds: nein mm/U turning speeds: 80 - 2000 U/min total power requirement: 0,9 / 1,45 KW weight of the machine ca.: 0,22 t dimensions: 0,85 x 0.6 x 1,9 m Pillar drill with: - Variable spindle speed - Digital speed display - Digital depth display - Forward/reverse rotation The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

bore capacity in steel (diameter): 32 mm throat: 300 mm bore stroke: 140 mm taper MK: 3 MK table-size: 380 x 360 mm feeds: über Handrad turning speeds: 85 - 1100 U/min total power requirement: 1,3 KW weight of the machine ca.: 0,27 t dimensions: 0,95 x 0,6 x 1,92 m Pillar drill with: - Feed via handwheel - Spindle speeds via belt drive The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

bore capacity in steel (diameter): 32 mm throat: 325 mm bore stroke: 170 mm taper MK: 4 MK table-size: 570 x 480 mm feeds: 0,1 - 0,16 - 0,25 mm/U turning speeds: 60 - 1600 U/min total power requirement: 2,9 KW weight of the machine ca.: 0,65 t dimensions: 1,2 x 0,8 x 2,15 m Pillar drilling machine with: - Feed - Variable spindle speed - Coolant pump - Machine light The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Key data: 20 mm

0.75 KW 380 V 16 A Röhm Drill Chuck Supra 1 - 13 mm Speed 210 - 2580 rpm With substructure Length 74 cm Width 30 cm Height 98 cm

A Gebrüder Irle CNC large-format deep-hole drilling machine is available. Drilling capacity steel: 40mm, max. drilling depth: 1600mm, drill spindle adjustment: 350mm, vertical drilling unit adjustment: 700mm, power: 30kW, speed: 2940rpm, field range constant power: 1-3, armature range constant torque: 1-35, max. drill spindle torque: 1500Nm, rated speed: 163rpm, spindle flange diameter: 200mm, quill diameter: 2000mm. Feed: 500mm/min, rapid traverse: 1200mm/min, max. feed force: approx. 34.3kN, display: 0.005mm, vertical adjustment travel: 700mm, longitudinal adjustment travel: 13000mm, transverse adjustment travel: 650mm, swivel: 85°. Clamping plate dimensions X/Y/Z: 12500mm/1000mm, guide bed dimensions X/Y: 3350mm/455mm, controls: Heidenhain TNC 310. Documentation available. An on-site inspection is possible.

Offer 25511 Technical data: - Drilling capacity in steel ST 60 28 mm - Drilling capacity in steel ST 60 32 mm - Tapping device - Drilling spindle holder MK 3 long spindle - Drilling spindle stroke 180 mm - 10 drilling spindle speeds 250 - 2100 rpm - Projection approx. 290 mm - Max. distance table – drilling spindle approx. 620 mm - Table with 2 T-slots height-adjustable 520 x 450 mm - Drive 400 V / 1.0 / 1.3 kW - Space requirement approx. W 600 x H 1850 x D 700 mm - Weight approx. 280 kg

For sale is a heavy and robust industrial column drill from the manufacturer Perfect, model BF 40 VS. The machine impresses with its solid cast construction, high stability and reliable technology. Thanks to its automatic feed and variable speed control, it is ideal for metalworking, mechanical engineering, locksmithing, repair shops or training workshops. The machine is in used, working condition with signs of wear and tear. General information Machine Type: Industrial Column Drilling Machine Manufacturer: Perfect Model: BF 40 VS Year of Make: 1988 Condition: Used, functional Availability: Immediately available Technical data Drilling capacity steel: 40 mm Threading: up to approx. M30 Spindle holder: MK4 Quill stroke: approx. 180–200 mm Speed range: approx. 50–2000 rpm Feed: automatic Motor power: approx. 2.2–3 kW Operating voltage: 400 V Projection: app ...

Atlas Copco A-66 CLL crawler drilling rig with center fifth wheel on crawler undercarriage, pump foaming agent, double clamp Ø 310 with hydraulic piston puller 20 ton, mast with useful stroke 12.00 m, torque 1300 kgm, 6 cyl Deutz diesel engine. 106 HP

bore capacity in steel (diameter): 35 mm throat: 280 mm bore stroke: 150 mm spindle taper MT: MK 4 thread cutting attachment: M 30 table-size: 550 x 400 mm spindle turning speed - stepless: 80 - 1.400 U/min feed range - boring: 0,1 / 0,2 / 0,3 mm/U coolant: voltage: 400 V total power requirement: 1,3 / 2,3 kW weight of the machine ca.: 400 kg dimensions of the machine ca.: 0,70 x 0,80 x 1,95 m - Serial No.: 186367 - Excellent condition! - Automatic vertical feed - Threading unit Max. threading capacity: M30 - Reversible motor Speed 1: 80 – 700 rpm Speed 2: 160 – 1.400 rpm - Quick-action drill chuck ALBRECHT 1–13 mm - Coolant system The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

From a current recycling we offer you 2 used column drilling machines / thread cutting machines from maxion, type BS 36 GL. Year of Make: 2022 Condition: good Hours: Asking price: 5,000 € each Original price: 11.900 € each Equipment / accessories / other information: Tapping capacity: M5-M30 Spindle speeds: 160-260-380-580-880 rpm Spindle MK 4 Thread depth 90mm Drilling depth 160mm Radius 300m Table 550x440mm Overall height 2105mm Asset Manager: M. Vorkötter Phone: 0202-257273152 Mail: m.vorkoetterakf.de We will be happy to provide you with details upon request. Location: 68753 Waghäusel The sale is without warranty Subject to prior sale

A CNC radial drilling machine overhauled in 2018 is offered. Working range X/Y: 1050mm/1800mm, drilling capacity steel: 40mm, drilling capacity cast iron: 50mm, thread cutting: M36-M45, tool holder: SK40, speed range: 15rpm-2800rpm, quill stroke Z: 200mm, column stroke W: 410mm, table clamping surface X/Y: 1800mm/600mm, feed speed: 5mm/min-2000mm/min, rapid traverse X/Y: 7.5m/min, control: CNC control. Equipped with 360° swivel device, motorized tool clamping, three-jaw chuck for round parts, modernized LCD monitor, extensive tooling package. Weight: approx. 2900kg, overall dimensions X/Y/Z: approx. 2600mm/1900mm/2950mm. Inspection possible by arrangement.

Code: 0318 Brand: BIESSE Model: F 39 E - CE Standard Electronic multiple boring machine with 39 spindles for furniture, carpentry, custom-made furnishings, panels, kitchens, bathroom furniture, doors,window frames, and various - CE Standard Suitable for horizontal and vertical drilling, any intermediate drilling between 0 and 90° can be performed thanks to a gear motor and handwheel. Electronic control Technical data: N° 39 spindles Spindle rotation speed 4000 rpm Center distance between spindles 32 mm Max drilling center distance 1216 mm Drilling depth 65 mm Drilling head motor power 2,3 + 2,3 Hp Air operating pressure 6 bar Installed electrical power 4,1 Kw Overall dimensions mm 1800 x 1140 x 1600 h Weight kg 700 MACHINE SOLD UNDER THE CONDITIONS IN WHICH IT IS FOUND NOT RECONDITIONED

Year of manufacture 1991 4 drilling spindles with automatic table movement Adjustable drill spindle spacing electr. Footswitch Mobile substructure Delivery date: immediately from stock

Manufacturer: Sandvik Model: Leopard DI650i Type of Machine : DTH Surface Drill Rig UNIT 1 - Year of manufacture: 2020 - Total engine hours: 19,041 - Engine replaced | Hours on new engine: 7,700 - Drilling hours: 7,355 UNIT 2 - Year of manufacture: 2021 - Total engine hours: 18,608 - Engine replaced | Hours on new engine: approx. 5,422 - Drilling hours: 7,443 Technical Details : - Drilling method: Down-The-Hole (DTH) - Hole diameter range: 115 to 229 mm (4.5 to 9.0 in.) - DTH hammer: Sandvik RH570 (4, 5 and 6 in.) - Flushing air capacity: 28.3 m3/min at 24 bar - Drill rod/tube diameter: 89, 102, 114, 127 and 140 mm (3.5, 4, 4.5, 5 and 5.5 in.) - Rotary head: MRH6 - Engine type: Caterpillar C15 (Tier 3 / Stage 5, Tier 4F) - Engine output power: 403 kW at 1,800 rpm - Cabin: iCab - Production capacity: 2.1 Mt/a (one shift) - Transport height: 3.5 m (11.5 ft) - Weight: 25,100 kg (55, ...

Built in 1990 4 drilling spindles Adjustable drill spindle spacing Stacking slider left Triggering by microswitch Delivery date: immediately from stock

Key data: 40 mm, 240 mm

Machine Type: Column Drilling Machine Manufacturer: ERLO Type: TCA40 Year of manufacture: - Condition: used Offer will only be sent if a complete imprint is provided! Price 3.750 incl. 19% VAT / Fixed Price Location Warstein , Germany Reference number M-ERL-0526 DESCRIPTION We offer you a used column drill from the manufacturer Erlo. Performance in steel 40mm Strong gear feed Overall height 2350mm Weight 650kg Incl. solid 160mm machine vise. Availability: immediately Our offer is aimed at tradespeople who are registered in the sense of the Trade Regulation Act according to §14 GewO. The offer is subject to change, subject to prior sale. Please provide your full contact details to receive a quote with our terms and conditions of payment. Errors in the descriptions and offers are reserved

Manufacturer: Epiroc Model: FlexiRoc D65 Type of Machine : DTH Surface Drill Rig UNIT 1 - Year of manufacture: 2019 - Total engine hours: 29,346 - Engine replaced | Hours on new engine: 10,288 - Drilling hours: 10,523 UNIT 2 - Year of manufacture: 2020 - Total engine hours: 26,274 - Engine replaced | Hours on new engine: 8,967 - Drilling hours: 10,000 UNIT 3 - Year of manufacture: 2020 - Total engine hours: 25,005 - Engine replaced | Hours on new engine: approx. 6,500 - Drilling hours: 9,372 Find more here - .ucymachines/ Contact us at - sales@ucymachines

Speed range: 51-966rpm, feeds: 0.30-0.60mm/rev, number of drilling heads: 3, spindle mount: MK5, with coolant unit, electromagnetic feed clutch, multi-speed gearbox, T-slot clamping plate, motorized height-adjustable heads and automatic spindle feed, without documentation. An on-site inspection is possible.

Inv. Num. : 9173 Type: CM-H32Z Producer: CHMER Created: 2001 Parameters: Max. travel length of the X-axis: 300 mm Max. travel length of the Y-axis: 250 mm Maximum workpiece length: 610 mm Maximum workpiece height: 200 mm Maximum workpiece height: 420 mm Maximum table load: 120 kg Length: 1523 mm Width: 1183 mm Height: 2158 mm Weight: 700 kg

This 3-axis KOTEC PSD-4520 drilling machine was manufactured in 2020. It features a gantry type setup with a maximum processing capacity of 4500 × 2000 mm and a spindle motor of 18.5 kW, achieving up to 1780 RPM. The machine includes a CAD file interface and operates on a Windows-based system, ensuring ease of use and flexibility in operations. Consider the opportunity to buy this KOTEC PSD-4520 drilling machine. Contact us for more information about this machine.

Offer 26144 Technical data: - Drilling capacity in steel ST 60 40 mm - Drilling capacity up to 45 mm - Tapping device up to M 36 - Feeds infinitely adjustable - Drilling spindle holder MK 4 - Drilling spindle stroke programmable up to 175 mm - Drilling spindle speeds infinitely variable 30 - 2400 rpm - Projection 300 mm - Table with 2 T-slots 600 x 500 mm - Height adjustable via rack with hand crank - min. - max. distance table - drilling spindle 70 - 830 mm - Drive 400 V / 7.5 kW - Space requirement approx. W 600 x H 1980 x D 950 mm - Weight approx. 500 kg

bore capacity in steel (diameter): 50 mm arm length: 1.600 mm workpiece height max.: 1.200 mm distance spindle/base plate: 320 - 1.220 mm spindle taper MT: 5 quill stroke: 315 mm throat min.: 350 mm throat max.: 1.600 mm quill feed: 0,04 - 3,20 mm/U drive capacity - spindle motor: 4,0 kW spindle turning speed range: 25 - 2.000 U/min column diameter: 350 mm voltage: 400 V total power requirement: 6,5 kW weight of the machine ca.: 3,5 t dimensions of the machine ca.: 2,45 x 1,00 x 2,65 m - Serial-No.: 4045935 - Clamping cube 630 x 500 x 500 mm - Coolant pump The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

- 4 head drilling machine - with the existing accessories

bore capacity in steel (diameter): / mm throat: / mm bore stroke: / mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

General Manufacturer: Alzmetall Type: AC 32/AS Year of Make: 1991 Performance Drilling capacity St 60: D32 mm, v=20 m/min, s=0.27 mm/rev Drilling capacity GG 20: D40 mm, v=20 m/min, s=0.27 mm/rev Drilling capacity St 60: D45 mm, v=20 m/min, s=0.15 mm/rev Tapping capacity St 60: M 24 Threading capacity GG 20: M 30 Drive Main drive: 3 kW – 1,500 rpm Main spindle speed range: 55 – 5,000 rpm Feed Feed drive: automatic, infinitely variable Feed speed: 1 – 3,000 mm/min Rapid traverse: 3 m/min Spindle Tool holder: MK4 Spindle head diameter: 46 mm Quill stroke: 180 mm Projection: 322 mm Column diameter: 145 mm Table Table clamping area: 415 mm x 508 mm Number of T-slots x width x spacing: 5 x 14 x 100 Table stroke: 663 mm Distance from spindle table max: 663 mm Spindle-machined base plate distance: 1,083 mm Dimensions and weight Dimensions: 720 mm  ...

Key data: 28 mm, 285 mm

Drilling capacity in steel: approx. 28mm Projection approx. 285mm Drilling depth approx. 125mm Spindle mount MK3 Infinitely variable speeds from 130-1150 rpm 3 automatic feeds 0.1 - 0.2 - 0.3mm/rev Table clamping area approx. 500 x 370mm Table adjustable in height via rack Machining base plate approx. 350 x 320mm With motor 1.5kW, 1415 rpm, 380/220V Weight: approx. 380kg Condition and details see pictures

taper MK: 3 serial number: 4131 throat: 1000 mm documentation: ja clamping: hydraulisch kW weight of the machine ca.: 2,6 t The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

PETECH WEW5050 pillar drill is designed for precise drilling of holes with a maximum diameter of 50 mm. Machining is performed by means of a work head with a reliable spindle. The work table with adjustable height and rotation around the column allows for convenient positioning of the workpiece and adjustment of the working position. The workspace is illuminated by a lamp mounted on the body of the PETECH WEW5050 machine. Technical specifications of the PETECH WEW5050 column drill press - maximum drilling diameter: 50 mm - workspace illumination

Danube DR 23 - High Radial Drilling Machine -Drilling capacity / steel approx. 28mm -Projection approx. 700mm -Morse taper MK 3 -Speed range 70-1550 rpm - Gearbox -Feed range 0.075-0.3mm -Drilling depth 130mm -Tapping device -Hydraulic clamping -Documentation Dimensions: Hjbkn Asvw D Smeu S Tol LxWxH 2x1.7x1.9 meters / Weight 1900Kg

Alzmetall AB 3 ES - Column Drilling Machine -Drilling capacity / steel 35mm -Projection 280mm -Drilling stroke 180mm Hebkn Auevtzrvj S Tol -Recording MK 3 -Table size 600x470mm -Stepless speed regulation -Drilling depth stop -Drill chuck -Documentation Dimensions: LxWxH1.2x0.8x2.1 meters / Weight 550 kg

Collet / Gamesa - Radial drilling machine / mobile crane -Boom approx. 1200mm -Universal angle head can be adjusted in several ways -Spindle speed 95 - 750 rpm -Automatic feeds -Morse taper MK4 -Boom height adjustable approx. 1400mm -Control cabinet retrofit Dimensions: LxWxH 2x1x2.1 meters / Weight 1500Kg Hebkjvucbhon Au S Tsl

GILLARDON GB 20 Drilling capacity in steel approx. 25mm Projection 285mm Drilling stroke 150mm Table clamping surface 400x400mm Table adjustment approx. 650mm Bnwaxdsulle Drilling depth stop Stepless speed regulation Speed display Emergency stop Work light Footswitch Dimensions LxWxH 0.8x0.6x2 meters / Weight 450Kg

column drill / GILLARDON GB 25 -Drilling capacity / steel 32mm -Drilling capacity / cast iron 35mm -Speed range - Stepless 60-1800 rpm -Direction of rotation / Right-Left -Morse taper MK 3 -Projection 290mm -Quill drilling stroke 175mm -Table surface 450x355mm -Table height adjustment by hand crank -Tapping device -Coolant device -Drill chuck -Analogue speed display -Footswitch -Emergency stop -Documentation Dimensions: LxWxH 0.7x0.7x2Meter / Weight 450Kg

Column Drill MAXION / IXION BS 25 ST - G -Well-groomed general condition -CE marking -Year of manufacture 2000 -Drilling capacity / steel 25mm -Tapping device up to M20 -Spindle holder / Morse taper MK 3 -Drilling stroke / spindle stroke 120mm -Projection 260mm -Speed range / infinitely variable 120-2160 rpm -Automatic feed - Work table size 500x365mm -Column diameter 110mm -Spacing/Spindle Table 90-760mm -Drive power 1.5 KW -Drill chuck Dimensions: LxWxH 0.8x0.5x2 meters / Weight 300Kg

incl. various drills, long stops on both sides and 2 support tables with ball sleeves The sale is carried out on behalf of the customer from the current location, in the condition as existing, excl. Warranty.

Offer 24456 Technical data: - Drilling capacity in steel ST 60 approx. 60 mm - Drilling capacity boring approx. 80 mm - Thread cutting up to approx. M 40 - Drilling spindle holder MK 5 - Drilling spindle stroke 380 mm - Radius min. / max. approx. 420 / 2000 mm - Column diameter approx. 500 mm - Stroke of the boom approx. 1350 mm - Min. / max. distance: - Spindle – base plate approx. 370 - 1700 mm - Machined base plate clamping surface approx. 1100 - 2300 mm - 12 spindle speeds 19 - 1900 rpm - 9 feeds 0.09 - 0.75 m/rev - Drilling spindle drive 400 V / 10 kW - E - Central clamping - Coolant device - Space requirement approx. W 1400 x H 3400 x D 3600 mm - Weight approx. 7500 kg

Tool holder MK 4 Drilling capacity up to 40 mm steel Clockwise and counterclockwise rotation Stepless speed adjustment with display Automatic feed

A conventional Gillardon multi-spindle drilling machine is available. Drilling units: 4, spindles: 4, drilling capacity in steel: 25mm, tapping capacity: M20, drilling stroke: 150mm, speed: 3000rpm/1400rpm. An on-site inspection is possible.

: 40 mm : M 24 : M 30 spindle turning speed - stepless: 160-2250 U/min : MK 3 spindle stroke: 120 mm throat: 293 mm column diameter: 115 mm : 515x360 mm distance spindle /table: min./max. 117/701 mm : 2 x 14 x 224 mm feed: 0,1 + 0,2 mm/U Machine height: 1840 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

bore capacity in steel (diameter): 28 mm arm length: 700 mm workpiece height max.: 1300 mm tool taper: MK3 feeds: 0,1-0,3 mm/U spindle turning speed range: 100-1.220 U/min total power requirement: 1,4 kW weight of the machine ca.: 1,3 t dimensions of the machine ca.: LBH 1,8 x 0,8 x 2,3 m Incl. cube table Incl. drilling feed Mechanical clamping The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Auerbach AX TBE 200.1Year of manuf. : 2013 ____________Description:In general:Drilling-ø (max.):3,5 mmDrilling depth (max.):200 mmDeep drilling module:Technology:DrillingspindleSpeed (max.):10.000 rpmPower:3,5 kWTaper:HSK-A40Equipment/Accessory:Chipmanagement:Chip trayCoolingmanagement:Internal cooling unit with Filter and High-pressure, 140 barWorkpiececlamping:Collet chuck, SMW Autoblok KSZ-MB-040-Z140Oilmistseparation:Electrostatic extraction, LTA AC 500Further Accessory:Misc. Single lip driller

Dowel and stair drilling machine GÖTZINGER RBS swivel with laser very good condition, the machine has been used very little and is as good as new, it comes from an educational institution it can be used to drill dowel holes and similar things the machine has a drill head type BKF-5 with 5 drill bits M10 female thread, the distance between the drill bits horizontally is 32mm, vertically it is 25mm the whole drill head can be swivelled 360° with degree display and different grids, a normal 2-jaw chuck can also be used You also get 3 drill bit holders, for drills with a cylindrical shank of 12 or 16mm, and for drills with an M10 external thread the machine table is 1100mm wide and 250mm deep, there is a stop at the front that can be lowered if necessary for the production of dowel connections there are 2 adjustable angle stops on the machine table, which can be adjusted with an  ...

ID3812 Morath AKU D25 year/Baujahr 2007 Morath excavator-mounted drilling mast, with OQ 70/55 adapter plate (1 unit); Morath duplex rotary drive (counter-clockwise rotation on the outside, clockwise on the inside) (1 unit); HB100 hydraulic hammer (1 unit); Remote Control Station. Morath Excavator mounted mount, with adapter plate OQ 70/55, 1 pc. Duplex rotary drive Morath (outside left inside right-turning), 1 pc. Hydr. Hammer HB100, control station remote control

Drilling Ø: 28/35 mm Spindle holder: MK 3 Projection: 293 mm Table size: 300 x 440 x 500 mm Table swivel on round column and height-adjustable via hand crank and rack Large distance between table and drill quill: 630 mm Quill stroke: 180 mm Spindle speeds adjustable in 4 groups: 65 - 1750 rpm Drive motor: 380 V, 0.9/1.3 kW Weight: 340 kg Space requirement: 1100 x 900 x 1880 mm

Drilling Ø in steel/GG 20: 40/55 mm Spindle holder: MK 4 Projection: 345 mm Table size: 450 x 600 mm Distance between table and drill quill: 785 mm Quill stroke: 180 mm Spindle speeds in 4 groups by pole-switching. Engine and manual transmission as well as infinitely variable control: 160 - 1540 rpm 4 automatic feeds: 0.09; 0,12; 0.18 and 0.22 mm/rev Drive motor: 380 V, 2.6/3.2 kW Weight: 640 kg Space requirement: 700 x 1150 x 2000 mm

Drilling Ø: 28/35 mm Spindle holder: MK 3 Projection: 293 mm Table size: 400 x 400 mm Table swivel on round column and height-adjustable via hand crank and rack Large distance between table and drill quill: 630 mm Quill stroke: 180 mm Spindle speeds in 4 groups adjustable: 65 - 1750 rpm Drive motor: 380 V, 0.9/1.5 kW Weight: 340 kg Space requirement: 600 x 920 x 1880 mm

Drilling Ø: 28/35 mm Spindle holder: MK 3 Projection: 293 mm Table size: 400 x 400 mm Table swivel on round column and height-adjustable via hand crank and rack Large distance between table and drill quill: 630 mm Quill stroke: 180 mm Spindle speeds in 4 groups adjustable: 65 - 1750 rpm Drive motor: 380 V, 0.9/1.5 kW Weight: 340 kg Space requirement: 600 x 920 x 1880 mm