drill rig used for sale

Refer to code 1148 in your request More information on our web page G3 Mixing Technologies - G3 STOCK or LinkedIn G3 STOCK Used machine, possibility to be purchased "as is" without warranty, or completely rebuilt and guaranteed as new machine.

HF MIXING GROUP, FRANCIS SHAW, POMINI. Chamber/Drilled Sides: GK250-K6A-K5-VIC275-11D. Refer to code 1117-1118-1119-1120-1148 in your request More information on our web page G3 Mixing Technologies - G3 STOCK or LinkedIn G3 STOCK Used machine, possibility to be purchased "as is" without warranty, or completely rebuilt and guaranteed as new machine.

Size: 45 x 150 mm Equipments: Double head paper driller Drill distance 45 - 150 mm Space behind drill heads 100 mm Operation Lever operated, single phase 240 Volts

Key data: 500 mm, 200 mm

Drilling / Milling machine OPTIMUM type OPTI F 40 E Travel X: 500 mm Travel Y: 200 mm Spindle: Ø 80 mm Cone CM3 Spindle exit: 120 mm Spindle speed: from 95 to 3200 RPM Table size: Length 730 mm x Width 210 mm 2 speeds motor Motor power: 1,5 Kw Straight head Cross table Manual Descent Equipped with: 1 rotary vice Voltage: 380 V Dimensions (L x W x H): 1200 x 900 x 1400 mm Weight: approx 350 KG

Equipments: Good condition without any damage 4 head paper drills

Freesrobot Staubli RX170HM Deze robot is voorzien van gaten om te frezen in mallen van banden, maar ook in andere zaken is dit mogelijk. Koeling door de spindel en de koelmelk is luchtgekoeld. Smering Gebeurde met vet. spindelopname: HSK E 32 Werd gebruikt in Tire Mold fabriek Mecamold Herstal. Max weight on the table: 300 kg Admission in spindle (ISO): HSK E 32 Power on the spindle: 8 kW Drilling-capacity: 80 mm Tapping-capacity: 80 mm Control : Fanuc Number of axes: 6 Toolchanger: nee Number of toolholders: nee Number of rotations: 500 - 20 000 rpm Power principal motor : 5 kW

The drill drive (drill head) and flushing pipes have a 3-inch (75 mm) passage for easy installation of 50/60 mm filters and gravel filling. , , The rotation of the flushing pipes is driven by a hydraulic motor, with hose couplings connected to a hydraulic system. In addition, the SB 1 flushing drill drive can be operated in such a way that the rotation and opening/closing of the spade valve is controlled hydraulically., For installing drainage/wellpoint filters and pouring gravel (optional)., Weight (kg): 175 (without lance), , Hydraulic motor: CCM160, RPM 170@100L, Flow: 100 (max 125) l/min, Working pressure: 200 (max. 240) BAR, Oil bath: 8 liters, Gear ratio: 3.09:1, Suitable for flushing pipe: 3 inches (75 mm) 4-8 meters long, Lances/flushing pipes included: , ø80 mm, length 387 cm, ø100 mm, length 520 cm, , = More information =, , Year of manufacture: 2024, Empty weight: 160 kg, Te ...

Size: 0x0 Equipments: 2 spindles

I am selling a vertical continuous CNC milling and drilling machine HOMAG Weeke Drillteq V-200 (formerly BHX 055), built in 2023. Configuration: 1 pc. milling unit with tool change 4-positions HSK63 13 + 4 + 2 pcs Drilling Spindles 1 pc grooved saw Feed back, which slices the elements back to operator or rear as the conveyor machine. Condition as good as new. With full documentation and CE Available the same.

Manufacturer: AgieCharmilles Model: EDM DRILL20 Year of Manufacture: 2013 Type of Machine : Start hole EDM machine Technical Specifications - Drill Diameters: 0.5 mm, 1 mm, 1.5 mm, 2 mm - Travel Distances: X 300 mm / Y 200 mm / Z 300 mm - Phase: 3 - Voltage: 380 V - Power: 4 KVA - Frequency: 50 Hz - Current: 4.5 A - Short-circuit Current: 10K A - Weight: 875 KG Condition and Accessories The machine is in used condition with normal signs of wear. Extensive accessories are included. Find more here - / Contact us at -

Flott SB M3 ST Pillar Drilling Machine. 3-speed 380V motor, runs smoothly. Spindle speeds are steplessly adjustable via the variable speed drive. Speeds adjustable from 200 to 2000 RPM. MK3 spindle taper. Quick stroke: 120 mm Drilling depth is adjustable. Table: 400 x 320 mm Table height is adjustable. Includes Röhm 3 to 16 mm drill chuck. Includes vise. Spindle guard. Emergency stop switch. Made in Germany. Machine is in good, well-maintained condition. Overall dimensions: 60 x 40 x 182 cm

Controls: Heidenhain TNC 360 (1992) Table size: 1,000 x 1,000 mm Table size with extension: 1,345 x 1,000 mm Table load max.: 2,000 kg Distance between the s distance Spindle to table top: 0 - 1,100 mm Travel distances: X 1400 mm Y 900 mm Z 850 mm W 370 mm spindle holder: MK 5 spindle drive power: 6 kW spindle speeds: 30 - 1,500 rpm Drilling spindle diameter: 82 mm drill diameter: 2 - 70 mm Drilling tools Diameter: 17 - 450 mm Drilling capacity to full ST60: 45 mm Drilling capacity to full GG: 70 mm Zubehoer: drills; tools; usw. machine was rebuilt in 1992 and !; Very good

CNC double-staender coordinate drilling rig with deep drilling support Kolb KBN G 120 year 1984 / Converted to Heidenhain TNC 426 in 2006 table size 4250 x 2200 mm Table load 14 t Table laengsweg X 3000 mm Main Spindle crosspath Y 2180 mm deep drilling spindle crossing path A - 2000 mm spindle vertical path 500 mm Distance between the stems 2640 mm; spindle - table 100 - 1300 mm; spindle diameter 224 mm Spindle drive power 46 kW spindle speeds 14 - 1400 rpm spindle holder ISO 50 Drilling in steel ST60: 100 mm diameter; drill up to 300 mm; threaded cutting up to M 125 x 3; frard power 730 cm3r/min.; SECOND SUPPORT SUPPORT: spindle speeds at BTA and ELB drilling 315 - 3150 rpm high high pressure oil Offer number V(B)-5234; Very good

see side sheet below, with 2-spindle drill head Franz X. LINDNER SBS-2/2, spindle distance 300 mm, (translation 1:1)

Pos. 1.0 Precision Rotary Table Make EIMELDINGEN with aerostatic axial bearing Specifications Table diameter 3,400 mm Total height approx. 1,230 mm Centering bore Ø 250H7X 25 mm Permissible transport load 20,000 kg Holding torque of the table clamping 2,400 daNm Table speed 0.002 – 2 min Net weight approx. 22,000 kg Operating voltage 380 V, 50 Hz. 3 phases Control voltage 24V Positioning accuracy (without control errors) ± 1" Plan accuracy 0.02 mm Axial running accuracy 0.01 mm Concentricity deviation of the centering bore 0.01 mm Resolution of the displacement measuring systems 0.0001° Pos. 2.0 3-Axis Cross Bed Boring Mill Specifications Column stroke transverse "X" 500 mm Carriage stroke horizontal "Z" 650 mm Spindle box vertical "Y" 800 mm Rapid traverse speed Y + Z 8,000 mm/min Feed speed (infinitely adjustable) 0-1000 mm/min  ...

- technically efficient, ready to work - after full service - 4-spindle - bumpers (right + left)

Horizontal drilling rig, manufacturer: DITCH WITCH, type: AT 40 All Terrain, year of construction: 2018, read operating hours (h): 2,898, serial no.: DWPAT40XHK0000065, with rod box, drill pipe, without drill heads, diagnostic screen with approx. 12 error messages (including AdBlue malfunctions), engine no.: 707 3399, 4-cylinder diesel engine, 119 kW, thrust JT/AT 178 kN, extendable cab with heating and air conditioning, flushing high-pressure pump, electric shock protection system, hydr. Crusher, remote control with remote shutdown function, Commander 7 controller with locating system

The INGERSOLL RAND TH60 drilling rig is a versatile and powerful machine designed for various drilling applications. It is built with robust construction, advanced technology, and a user-friendly interface, making it suitable for both onshore and offshore drilling operations. The rig offers high performance, reliability, and safety features to ensure efficient and productive drilling operations. Specifications: Water Well Rigs - 2002 international with Cat engine, 18 speed, new front tires . Rig is 1979 TH60 with 5x6 garner denver punp with new gear and pump end. 640" of new 89mm6.1m(20´) 12mm 2 3/8" IF rod, two new stabelizers, new murphy fast plug. Rig is direct hyd so no air over hydraulic. Less prob easy to fix! There is a portable pump to use due to highway weight regulations. Find more here - / Contact us at -

Manufacturer: Central Mine Equipment Model: 75 Year of Manufacture: 1972 Type of Machine : drill for geotechnics Km Count : 165208 kilometers Find more here - / Contact us at -

Manufacturer: FRAVIZEL Model: Zenith MFFR90 Year of Manufacture: 2022 Commissioned: 2023 Type of Machine : Drilling Rig Condition: The machines is relatively new and have seen little use. Find more here - / Contact us at -

EMCI, Explo 750T, Weight: 3800 kg, Dimensions: 450 x 150 x 235 cm, Drive: 75 HP diesel engine, Drill motor:, -Rotation speed 260 RPM, -Power: 3200 Nm, Pull-up/pull-down: 2500 kg-2500 kg, Comes with 32 x 3-meter drill pipes (96 meters), 1 x 250 mm drill bit, 1 x 300 mm drill bit, 1 x 200 mm drill bit, 1 x 150 mm drill bit, 1 x 400 mm auger drill bit., , = More information =, , Type of fuel: Diesel, Year of manufacture: Jun 2008, Model year: 2008, Power: 55 kW (75 HP), GVW: 3.800 kg, Technical condition: very good, Visual appearance: very good, Please contact Gert-Jan Kruitbosch (+31648061001, sales@vantongerentrading.nl) or John van Tongeren (+31620537017) for more information, , = Dealer information =, , Interested? We would be happy to make you an excellent offer! Send an email to sales@vantongerentrading.nl or call +31(0)55-3125902., , Do you have a question about an advertisement, dri ...

Open-face drilling machine from Schmidt Kranz & Co GmbH, Reliable German quality, This open-face drilling machine is designed for drilling with the Open-Front Technique, also known as auger drilling. This is a trenchless drilling technique. Trenchless drilling minimizes the impact on the environment and allows work to be carried out under existing structures without excavation., This machine can be used for a wide range of underground infrastructure applications where trenchless construction is required., • Brand: Schmidt, • Type: Open-face drilling machine, • Condition: Very well maintained, • Ready for immediate use, , Accessories, 57 pcs. Casing pipe with internal diameter Ø 350 mm, length 1000 mm, 29 pcs. Auger plus head: 1 MTR Ø 320 mm, 7 pcs. Auger: 1 MTR Ø 350 mm + clamp, 50 pcs. Casing pipe with internal diameter Ø 260 mm, length 1000 mm, 6 pcs. Auger: Ø 240 mm, 37 p ...

Quick-release drilling device for milling machine, drilling machine. Drilling barrel diameter 5 mm. DIN 6348 - size 0. Schnellspanner DIN 6348 - Gr 0. Für Fräsmaschine, Tisch-Säulenbohrmaschine. Bohrung: 5mm

Conrad Boxer 200 drilling rig , Pull-up 4000 daN / kg, Pull-down 2000 daN / kg, Winch//Witch 1450 daN / kg, Year of manufacture 2007, Weight 12,500 kg, Stroke 430 cm, This Conrad Boxer is equipped with:, Caterpillar track , - Caterpillar length center to center : 2600 mm., - Caterpillar width : 400 mm., Brevini EGO200LS winch with 50 meters / Ø10 mm., Soundings winch 200 meters stainless steel wire, Ø 2mm., , Hydraulically driven 4 drill head , , - Max. Drive torque 380 - 400 daNm, - Breakaway torque 475 - 500 daNm, - Max. Speed 80 rpm, , Hydraulically operated changeover clock, suitable for 3 1/2 drill pipes., Spool head suspension with weight compensation, Hydraulically operated catch clamp, Hydraulic tank 480 liters, Hydraulically driven spray pump, Drill pipe manipulator, Drill pipe storage rack incl. 74 pcs. 3-meter 3-1/2-inch drill pipes (222 mete ...

Package Overview Manufacturer: Tracto Models: Grundodrill 18ACS and Grundodrill 15XPT T5 TD73 Year of Manufacture: 2022 Unit 1 — Grundodrill 18ACS - Year of Manufacture: 2022 - Operating Hours: 1,484 - Engine: 123 kW Stage 5 drive motor for travel and drilling - Pulling and Pushing Force: 180 kN - Torque: 7,500 Nm - Undercarriage: Rubber-padded steel track - Cab: Full cab, swivelling, with heating, radio, and air conditioning - Drilling Data: Onboard documentation to DVGW GW 321 - Drilling Mode: Fully automatic - Remote Control: Radio remote control for travel operation - Bentonite Pump: 320 l/min onboard HD pump - Telemetry: Drill data transmission - Anchoring System: With bentonite collection tray - Rod Changing System: Hydraulic clamping and release unit Unit 1 — Measuring Technology - DigiTrak Falcon F5+ System with AF8 Display, DigiTrak Sender FT2, V2 15 inch (F2/F5), Lit ...

- Manufacturer: Tracto - Model: Grundodrill 15XPT T5 TD73 - Year of Manufacture: 2022 - Operating Hours: 915 - Engine: Cummins EU Stage V, 119 kW for travel and drilling - Pulling and Pushing Force: 160 kN - Torque: 6,500 Nm - Drill Rods: TD73, 3 m length each - Undercarriage: Rubber track with support shield - Remote Control: Radio remote control - Cab: Spacious cab with comfort seat, joysticks, and touchscreen panel PC - Drilling Mode: Automatic drilling - Rod Box: Fully galvanised - Rod Changing System: Semi-automatic - Clamping and Release: Semi-automatic - Anchoring System: With bentonite collection tray - Bentonite Pump: High-performance HD pump onboard the carriage - Data Transfer: Drill data recording and transmission - High Pressure Cleaner: Onboard — Measuring Technology DigiTrak Falcon F5+ System with AF8 Display, DigiTrak Sender FT2, V2 15 inch (F2/F5), Lithium battery.  ...

Atlas Copco A-66 CLL crawler drilling rig with center fifth wheel on crawler undercarriage, pump foaming agent, double clamp Ø 310 with hydraulic piston puller 20 ton, mast with useful stroke 12.00 m, torque 1300 kgm, 6 cyl Deutz diesel engine. 106 HP

Manufacturer: Epiroc Model: FlexiRoc D65 Type of Machine : DTH Surface Drill Rig UNIT 1 - Year of manufacture: 2019 - Total engine hours: 29,346 - Engine replaced | Hours on new engine: 10,288 - Drilling hours: 10,523 UNIT 2 - Year of manufacture: 2020 - Total engine hours: 26,274 - Engine replaced | Hours on new engine: 8,967 - Drilling hours: 10,000 UNIT 3 - Year of manufacture: 2020 - Total engine hours: 25,005 - Engine replaced | Hours on new engine: approx. 6,500 - Drilling hours: 9,372 Find more here - / Contact us at -

Manufacturer: Sandvik Model: Leopard DI650i Type of Machine : DTH Surface Drill Rig UNIT 1 - Year of manufacture: 2020 - Total engine hours: 19,041 - Engine replaced | Hours on new engine: 7,700 - Drilling hours: 7,355 UNIT 2 - Year of manufacture: 2021 - Total engine hours: 18,608 - Engine replaced | Hours on new engine: approx. 5,422 - Drilling hours: 7,443 Technical Details : - Drilling method: Down-The-Hole (DTH) - Hole diameter range: 115 to 229 mm (4.5 to 9.0 in.) - DTH hammer: Sandvik RH570 (4, 5 and 6 in.) - Flushing air capacity: 28.3 m3/min at 24 bar - Drill rod/tube diameter: 89, 102, 114, 127 and 140 mm (3.5, 4, 4.5, 5 and 5.5 in.) - Rotary head: MRH6 - Engine type: Caterpillar C15 (Tier 3 / Stage 5, Tier 4F) - Engine output power: 403 kW at 1,800 rpm - Cabin: iCab - Production capacity: 2.1 Mt/a (one shift) - Transport height: 3.5 m (11.5 ft) - Weight: 25,100 kg (55, ...

Fraste MD/XL , , ENGINE:, type: JOHN DEERE 4045TF275 DIESEL, number of cylinders: 4, displacement: 4.5 L, power: 86 kW, , ROTARY HEAD - , type: R12D100, number of hydraulic motors: 2, number of rotary heads: 2, Torque, speed (motors connected in series):-: 410 kgm(1) - 100 rpm/1’(1), Torque, speed (motors connected in parallel): 820 kgm(2) - 50 rpm/1’(2), , LIFTING SYSTEM, Lifting capacity (up): 5000 kg, Lifting capacity (down): 3500 kg, Stroke: 3500 mm, , CLAMP:, Type: double , Clamp diameter: Ø60÷280 mm, Max. diameter: 280 mm, , HYDRAULIC PULL CYLINDER, Number of cylinders: 2, Pulling capacity (up): 20,000 kg, , WINCH:, 2,000 kg (40 m/1), , Pump (suction pump), BBA - NB140 (350 m³/h, 25 MWC, 105 mm ball passage), , Included with the machine:, 20 drill pipes, length 3 m (60 meters total), , = More information =, , Type of fuel: Diesel, Year of manufacture: 2006, Model year: 2006, ...

Condition: Used, , Manufacturing year: 2012, , Serial nr: 13-10-932, , Engine: Yanmar 3 TNE74-YC, , Hour meter reading: 795, , , , Source Regeneration machine, , , , Tooljoint outer diameter 135 mm, , Inner diameter 100 mm, , Outer diameter 114 mm, , Undercarriage Hinowa”, , Scanreco control system, , , , , , By installing/connecting a submersible pump, pumping is possible at the desired depth; the digital water meter records the flow rate; the hydraulic reel is operable and adjustable., , = More information =, , Type of fuel: Diesel, Year of manufacture: 2012, Model year: 2012, Technical condition: good, Visual appearance: good, , = Dealer information =, , Interested? We would be happy to make you an excellent offer! Send an email to sales@vantongerentrading.nl or call +31(0)55-3125902., , Do you have a question about an advertisement, drill, pump, part, or order? Or would you just l ...

IPV M14.22 4x4 drilling vehicle equipped with TECOINSA TP-50 drilling system. First registration: 09/04/2003. MAN 6-cylinder diesel engine. Power: 162 kW (approx. 220 hp). Mileage indicated: 26.691 km. Equipped with John Deere 4045TF250 auxiliary motor for drilling rig drive. Includes two drilling heads. Delivered with large quantity of drill pipes. 4x4 configuration for work on difficult to access terrain. Suitable for geotechnical surveys, drilling and drilling. Used condition with normal signs of use and age. Auction-ID: A1-48291-31

Year of manufacture: 2018 Serial Number: 5000095 Auction-ID: A1-48851-1104

Consisting of 2x drill body, 2x battery (empty/defective) and 1x charger Auction-ID: A1-48457-90

RECON Part number: 1230 2144 Please note: we also have other various RECON parts of different manufaturers / types in stock. We are pleased to provide you with our current stock list. ---------------------------------------------------------------------- ----------- If you have any further questions do not hesitate to contact us

Exterior mirror, exterior mirror -Number: 2x exterior mirrors, right and left -Price: complete -Manufacturer: VW -No.: 2D1 857 502A 01C -Weight: 3.6 kg

Driven roller conveyor that can be rotated at right angles (90 degrees) by motor drive - used - Price (net) from location: only 1.500.-€, dismantled and loaded! Manufacturer: should be Siemens Dematic Built: Type: Length of roller conveyor: approx. 1,645m Wide element approx. 75cm Roll length: approx. 60cm Roll width: approx. 5cm Distance between rolls approx.: approx. 5cm Height: approx. 55cm Engine: SEW Length frame: one side approx. 2m, other side unknown (but can be changed anyway by the aluminium profiles Condition: good Available: now Location: Zwickau, later Frankenberg camp (Saxony)

chassis, electric motor, DC motor, traction motor, drive motor -Manufacturer: Baumann, chassis from electric forklift EVS 25/14 -Wheels: Ø 275 x 100 mm double tires -Individual components: see photos -Price/Delivery: complete -Transport dimensions: 860/360/H425mm -Total weight: 206 kg

right-hand wing mirror -Right-hand mechanical exterior mirror -for: Renault Kangoo -No.: 7700354637

Auction-ID: A1-48763-2408

Auction-ID: A1-48763-2411

Auction-ID: A1-48763-2407

Label dispenser Macro SP12 right side RA1956 Manufacturer: Schwinn Model: Macro SP 12 Year of manufacture: 2018 Alignment: right Label passage: up to 115 mm Label speed: 1-18 m/min Maximum diameter label roll: 300 mm Core diameter 40 mm expandable with adapter Power supply: Euro plug 230/50Hz Integrated control with control parameters, controllable inputs and outputs, fault messages,... Additional equipment: Start triggering external AP 010-500 Vacuum Applicator Module Maintenance - equipment - combination Core adapter AP 031 Prewarning - label supply Mounting frame Control box Warning light, 3-stage Features: nominal voltage: 50Hz, 230 maximale Etikettengröße: 115 Etikettengeschwindigkeit: 1-18 m/min Kerndurchmesser Rolle: 40 mm maximale Größe Etikettenrolle: 300 Etikettendrucker enthalten?: NEIN Etikettenaplikator?: Stempel Vorwarnung Etikettenvorrat: JA Hub Aufklebestempel: 500 m ...

Transnorm belt curve conveyor left GKF 70°-730-600 IR600 RA1936 The Transnorm belt curve is fully functional. It has a gear motor of the brand SEW. Supports and are not included in the scope of delivery. They are optionally available on request. Belt curves are often used in intralogistics for the internal transport of unit loads and are indispensable in modern distribution centers. Transnorm belt curves convince with performance and reliability. Thanks to a low-tension drive over the entire belt width, long operating times are no problem. Conical drums and a specially developed belt guide system ensure the highest possible running smoothness. Technical data: Frame width (NB): 730 mm belt width (GuB): 550 mm height (BH): 210 mm Inner radius (IR): 600 mm Conveying angle: 70° degrees support feet: optionally available Conveying speed (v m/s): freely adjustable with frequency converter b ...

Transnorm belt curve conveyor left GKF 70° degrees-770-600 IR600 RA1415 The Transnorm belt curve is in good condition (used) and fully functional. It has a gear motor of the brand SEW. Supports and are not included in the scope of delivery. They are optionally available on request. Belt curves are often used in intralogistics for the internal transport of unit loads and are indispensable in modern distribution centers. Transnorm belt curves convince with performance and reliability. Thanks to a low-tension drive over the entire belt width, long operating times are no problem. Conical drums and a specially developed belt guide system ensure the highest possible running smoothness. The pictures of the conveyor system shown here were taken in a logistics center while still installed. Technical data: Conveying length middle radius (NL): 1100 mm Frame width (NB): 770 mm with Motor 940 mm be ...

Transnorm belt curve conveyor right GKF 20°-750-550 IR1300 RA1477 The Transnorm belt curve is in good condition (used) and fully functional. It has a gear motor of the brand SEW. Supports and are not included in the scope of delivery. They are optionally available on request. Belt curves are often used in intralogistics for the internal transport of unit loads and are indispensable in modern distribution centers. Transnorm belt curves convince with performance and reliability. Thanks to a low-tension drive over the entire belt width, long operating times are no problem. Conical drums and a specially developed belt guide system ensure the highest possible running smoothness. The pictures of the conveyor system shown here were taken in a logistics center while still installed. Technical data: Type designation: Belt curve conveyor TS 1600-105 Conveying length middle radius (NL): 640 mm Fr ...

Transnorm belt curve conveyor GKF 3900-750-550 IR850 RA1382 The Transnorm belt curve is in good condition (used) and fully functional. It has a gear motor of the brand SEW. Supports and are not included in the scope of delivery. They are optionally available on request. Belt curves are often used in intralogistics for the internal transport of unit loads and are indispensable in modern distribution centers. Transnorm belt curves convince with performance and reliability. Thanks to a low-tension drive over the entire belt width, long operating times are no problem. Conical drums and a specially developed belt guide system ensure the highest possible running smoothness. The pictures of the conveyor system shown here were taken in a logistics center while still installed. Technical data: Type designation: Belt curve conveyor TS 1600-105 Conveying length middle radius (NL): 3900 mm Frame wi ...

Technical details: Manufacturer: Transnorm Type: belt curve 60° TS 1500 100 belt bend conveyors POS. 164 Year of construction: 1996 Angle: 60° Direction: Right Nominal radius: approx. 600 mm Width: 400 mm Usable width be expanded through fit the outer Guide Strap type: KT 58 Number: 1 x (article no. 20140058) Condition: Used / fully functional Color: Grey More information: incl. Guide Gear motor Manufacturer: SEW eurodrive Features: Construction year: 1996 condition: good (used) Nominal / inner radius in mm: 600 Belt width in mm: 500 angle: 60° Running direction: RIGHT Engine type: SEW Eurodrive scope of delivery: including side guides without supports Für eine individuelle, fachmännische Beratung setzten Sie sich einfach mit uns in Verbindung. Kontaktieren Sie uns einfach telefonisch oder per Mail. Wir helfen Ihnen gerne bei der Planung und Umsetzung Ihrer Projekte. Wir freuen u ...

curved belt conveyor curved belt 109° right Transnorm TS1500-100 second-hand machine Technical details: Manufacturer: Transnorm Type: curved belt 109° right TS 1500-100 belt bend conveyors Year of construction: 1999 Angle: 109° Direction: Right Nominal radius RN: 600 mm BN width: 600 mm Speed: v = 1.0 m/s Strap type: smooth, KT36 Drive location: outside pulling Condition: good condition / fully functional Please ask without support, if necessary. Price D-97076 Würzburg from central warehouse Transport dimensions: Lxwxh = 2.4 x 1.10 x 0.40 m Weight: 150 kg Features: condition: good (used) Nominal / inner radius in mm: 600 Nominal / outside width in mm: 670 Belt width in mm: 600 angle: 109° Driven: YES Running direction: RIGHT Engine type: SEW Eurodrive Conveyor speed m / s: 1,0 scope of delivery: without supports and side guides Für eine individuelle, fachmännische Beratung ...