We use cookies to optimize our website for you and to be able to continuously improve it. By continuing to browse the site you are agreeing to our use of cookies.
Disagree
121,948 used machines on RESALE, but how to find them? Machine Search
maximum number of results exceeded > 1000
please refine your search
used
ID3202 Wellco-Drill WD80 approx. 3110 hours/ hours Drilling rig, Hatz 3-cylinder diesel engine, fully hydraulic cylinder feed, flushing drill head - reinforced version, drive pin and pulling bell, rod catching device, centrifugal pump, cable winch, 4 hydraulic support cylinders, control panel, machine has been general overhauled (the control blocks have been completely renewed, the chain profile is new, the interceptor is new, the drill head has been completely overhauled, all possible wear parts have been renewed, all hydraulic components have been overhauled) Drilling rig, Hatz 3-cylinder diesel engine, fully hydraulic cylinder feed, directional drill head - reinforced design, drive journal and drawing bell, linkage interceptor, centrifugal pump, winch, 4 hydraulic support cylinders, control panel, machine has been completely overhauled (the control blocks have been completely rene ...
used
ID3203 Wellco-Drill WD500 year/Year of construction 1994 approx. 2780 hours/ hours Drilling rig, crown regulating load 100 kN, crown extraction load 100 kN, hydraulic power jetting head (torque 10,000 Nm), drilling pressure max. 55 kN, tractive force 55 kN, interception device max. 219 mm, 2 winches, centrifugal pump, piston pump Drilling rig, crown control load 100 kN, crown exception load 100 kN, hydr. Power flushing head (torque 10,000 Nm), drilling pressure max. 55 kN, tensile force 55 kN, interceptor max. 219 mm, 2 winches, centrifugal pump, piston pump
used
Description: drill head name up to 6 mm spindle speed (4) 2800-4700-7200 and 11400 rpm 230 V 150 W Approx. Onsite Dimension. (l x w x h): 250 x 200 x 380 mm, weight approx.: 8 kg
used
Radial Drilling GSP 49S22 Spindle: Ø 125 mm Cone CM6 Spindle exit: 600 mm Spindle speed: from 17 to 1050 RPM Arm travel: 1800 mm Maxi height column travel: 1800 mm Column diameter: 600 mm Total column height: 3000 mm Spindle motor: 11 kW Drilling/tapping function Mechanical locking of the column Hydraulic locking of the trolley Auto descent Delivered with one cube dimensions: L 800 x W 560 x H 600 mm Table size: L 3300 x W 1400 x H 320 mm Voltage: 380 V Total weight: 12 T
used
Description: SEC-100 TBC is an automatic collaring machine for making manifolds It includes a feed table with either 1- or 2-axis control The tube is fastened from its both ends to the SEC-100 TBC A suitable collaring program is selected from the PC controls and an automatic cycle is started SEC-100 TBC makes all the collars according to the selected program Manual process: • preset the elliptical pilot hole parameters manually. • install the preadjusted collaring head and the clamps accoridng to the tube size. • set the axial tube stop. • mount the tube in the clamps. • push the start-button and the cycle will start. Automatic cycle: • the clamps close and the EC-100 mills the elliptical hole. • when the hole is ready, the EC-100 unit retracts. • the S-100 unit begins the collaring of the tube and the trimming of the collar. • finally the EC-100 returns to the milling ...
used
Engine type: DEUTZ F4M2011, Speed: 0-3km/h, Stroke:3800mm, Pull push :4000kg, Max torque :620 kgm ( parallel ) , clamp diameter : 50-360mm, clamp force : 140KN, winch : 1500 kg, suction drill pump : Selwood S100, 63 meter drill pipe on the machine ø110mm (suction drilling) div drill heads available, belonging to the machine 27x 3meter tube ø110m separately available., also present 37x 3meter tube ø90mm with div drill bits, machine can be used for both flushing and suction drilling., , = More information =, , Type of fuel: Diesel, Year of manufacture: 2005, Number of cylinders: 4, Damages: none, Please contact Gert-Jan Kruitbosch (+31648061001, sales@vantongerentrading.nl) or John van Tongeren (+31620537017) for more information, , = Dealer information =, , Aroused your interest? . The sales team will be happy to answer any questions you may have. CALL or EMAIL us, we are here for you! ...
used
Controls: Heidenhain TNC 360 (1992) Table size: 1,000 x 1,000 mm Table size with extension: 1,345 x 1,000 mm Table load max.: 2,000 kg Distance between the s distance Spindle to table top: 0 - 1,100 mm Travel distances: X 1400 mm Y 900 mm Z 850 mm W 370 mm spindle holder: MK 5 spindle drive power: 6 kW spindle speeds: 30 - 1,500 rpm Drilling spindle diameter: 82 mm drill diameter: 2 - 70 mm Drilling tools Diameter: 17 - 450 mm Drilling capacity to full ST60: 45 mm Drilling capacity to full GG: 70 mm Zubehoer: drills; tools; usw. machine was rebuilt in 1992 and !; Very good
used
CNC double-staender coordinate drilling rig with deep drilling support Kolb KBN G 120 year 1984 / Converted to Heidenhain TNC 426 in 2006 table size 4250 x 2200 mm Table load 14 t Table laengsweg X 3000 mm Main Spindle crosspath Y 2180 mm deep drilling spindle crossing path A - 2000 mm spindle vertical path 500 mm Distance between the stems 2640 mm; spindle - table 100 - 1300 mm; spindle diameter 224 mm Spindle drive power 46 kW spindle speeds 14 - 1400 rpm spindle holder ISO 50 Drilling in steel ST60: 100 mm diameter; drill up to 300 mm; threaded cutting up to M 125 x 3; frard power 730 cm3r/min.; SECOND SUPPORT SUPPORT: spindle speeds at BTA and ELB drilling 315 - 3150 rpm high high pressure oil Offer number V(B)-5234; Very good
used
see side sheet below, with 2-spindle drill head Franz X. LINDNER SBS-2/2, spindle distance 300 mm, (translation 1:1)
new
work piece width: 200 mm workpiece height: 100 mm bore diameter: 10 / 20 mm saw blade diameter: 350 x 32 mm turning speeds: 3000 U/min : 100 x 100 mm Capacity 90° rectangular: 170 x 60 mm capacity 90 degrees: round: 100 mm work height max.: 970 mm Cutting height: max. 100 mm total power requirement: 1,9 kW weight of the machine ca.: 260 t dimensions of the machine ca.: 1400 x 850x 970 m Description: The ALU FRONT-450 is a double bevel machine with a swivel range of 45 ° left and 22.5 ° right and an automatic miter adjustment via stop functions. The saw stroke runs automatically and the material is pneumatically tensioned. The saw blade (450 x 30 mm) runs horizontally! Features: automatic mode Double miter right / left Saw stroke from bottom to top Carbide saw blade Saw speed adjustable length stop air pistol Minimal quantity cooling lubrication including sepia leaf The data for thi ...
used
ID2932 Atlas Copco ROC L6-44 year/Year of construction 2007 approx. 11860 hours/hours 21 t Blast hole drill, 11860 operating hours, 5420 compressor hours, working pressure 25 bar, CAT motor, many accessories optionally available (drilling tube 89 x 5000 mm, Mincon 3.5 "MP35 down-the-hole hammer, ballistic drill bit D105 etc.), optionally with spare parts dispenser machine ( Engine damage), year of construction 2001 Blast hole drilling rig, 11860 operating hours, 5420 compressor hours, working pressure 25 bar, CAT motor, optionally many accessories available (drill pipe 89 x 5000 mm, down-the-hole hammer Mincon 3.5 " MP35, drill bit D105 ballistic etc.), optionally with spare parts dispenser machine (engine damage), year of construction 2001
used
With articulated carrier DC26, load: 108kW, max. driving speed 16km/h, tyre size: 14.00 R24 A, 2x drill arm BUT 35, Diesel Power Generator Deutz BF4M 1013C, drill mounts BMH 6414, max. drill rod length: 4321mm, max. drilling depth: 4020mm, loading platform HL 210, CE standard, air/water flushing, heat exchanger and high-pressure pump Swellex, without drill hammers.
used
Pitch Drilling Device, Drilling Device WMW Size: 340 TGL 38703 Dividing Head: Table diameter: Ø 340 mm Table height: 135 mm Slot width: 12 / 21 mm Groove depth: 20 mm Centering hole in table: Ø 63 mm, with adapter plate Ø 50 / 155 x 5 mm Drill bush carrier: Drill bush holder: Ø 40 mm, adjustment range: 0 - 140 mm Height adjustment range: 21 - 226 mm for drill bushings: Ø 6 mm - Ø 22 mm further information under https://katalog.ub.uni-weimar.de/tgl/TGL_38703_05-1981.pdf used, tested ! Dimensions: 580 x 500 x 400 mm
used
Pneumatic drill, pneumatic angle drill, corner drill, pneumatic tool SPITZNAS Type 2.2101 GTS 45 W operating pressure: 6 bar tool holder: MK4 with disengagement spindle with claw coupling, lever valve and tool lubricators used, tested ! Illustration may differ ! Dimensions: 630 x 120 x 240 mm
used
Pneumatic drilling rig, pneumatic drilling machine, pneumatic tool ROCKWELL INTERNATIONAL MODEL 21L8020 POWER TOOL DIVISION Operating pressure: 90 PSI ( approx. 6,6,2 bar ) spindle speed: max. 3500 rpm spindle stroke: 40 mm tool holder: chuck 0 - 6.5 mm internal tool lubricators used, checked! Dimensions: 345 x 60 x 115 mm
used
Hydraulic drilling rig CHRISTENSEN DIAMOND PRODUCTS GmbH Type HB Motor: DANFOSS OMR 160 151-0213 Tool holder: Thread diameter: Ø 31,5 mm, pitch: 3.5 mm, length: 48 mm mounting flange: 178 x 152 mm, hole spacing: 147 / 108 mm, 4x bore: Ø 13 mm with claw coupling for cooling water supply used, checked! Dimensions: 600 x 180 x 170 mm
used
Hydraulic drilling rig BOSCH Motor: 0 511 625 302 ( 0511625302 ) Tool holder: Thread diameter: Ø 31.5 mm, pitch: 3.5 mm, length: 42 mm shaft housing: Ø 75 mm, 120 mm height adjustable arm length: 175 mm mounting flange: 70 x 83 mm, through thread: M12 x 1.75 with claw coupling for cooling water supply used, tested ! Dimensions: 550 x 180 x 270 mm
used
Year: 2003 - technically efficient, ready to work - after full service - for the upper and lower hinge - centering the element - SPS control
used
ID2487 Eurodrill CDH 2400 year/Year of construction 2008 1.4 t Double-head drilling rigs, ready for use, little used (approx. 500 hours) Double-head drilling rig, ready for use, little used (approx. 500 hours)
used
ID2285 Clamp Rod Magazine/Rod Magazine Rod magazine for drilling rig, 3-shaft magazine Boom magazine for drilling rig, 3-bay magazine
used
- technically efficient, ready to work - after full service - 4-spindle - bumpers (right + left)
used
Well drilling rig, drilling mount, UNIMOG drilling rig, UNIMOG drilling rig -Well drilling rig: on Mercedes Benz UNIMOG 4x4 with truck tandem trailer -Unimog: Mercedes Type 435 built in 1976, mileage: 97,243 km -Trailer: Schmid type MTT500 built in 1991 -Drilling rig: drilling power turret U 58 (company AGBO) torque 1700 Nm, speed 140 min -Linkage tensioning device: up to 165mm -22 boring bars: Ø 76mm length 4 m total length 88 meters -Theoretical drilling depth: 150 meters (depends on the soil and diameter of the drill hole) -1 flushing pump: Hatz 30C 30L, with Reno standard block pump type 65-250/263, 100m³/h, 8.9 bar -Price/tax: complete -Dimensions: Truck 6250/2300/H3350 mm / Trailer 6300/2400/H3050 mm -Total dimensions: 11300/2400/H3350 mm -Weight: kg
used
C&S Crathern & Smith- rigid box machines 2 machines sets for bottom and cover in one production cycle 2 x automatic gluing machines: CSG-1 2 x thermoplastic quad stayer QA-200 2 x automatic vision box spotter CSV-1 year 1997
used
built 1984, 800 mm diameter, 1.400 mm cylindrical part, 570 mm cone height, 1 vacuum filter with bag charging hopper, filtering surface 2,3 m², 3 blow through cellular wheel sluices 150 mm x 150 mm for feeding a conveying system.
used
RECON Part number: 1230 2144 Please note: we also have other various RECON parts of different manufaturers / types in stock. We are pleased to provide you with our current stock list. ---------------------------------------------------------------------- ----------- If you have any further questions do not hesitate to contact us
used
Driven roller conveyor that can be rotated at right angles (90 degrees) by motor drive - used - Price (net) from location: only 1.500.-€, dismantled and loaded! Manufacturer: should be Siemens Dematic Built: Type: Length of roller conveyor: approx. 1,645m Wide element approx. 75cm Roll length: approx. 60cm Roll width: approx. 5cm Distance between rolls approx.: approx. 5cm Height: approx. 55cm Engine: SEW Length frame: one side approx. 2m, other side unknown (but can be changed anyway by the aluminium profiles Condition: good Available: now Location: Zwickau, later Frankenberg camp (Saxony)
used
Outside mirror on the right -Mechanical right wing mirror -for: Renault Kangoo -No.: 7700354637
used
Length: 4100mm, width: 2050mm, height: 4100mm, very little documentation available, an inspection is possible.
used
The StyleShoots Horizontal, designed for flatlay product photography, contains a Canon EOS 5D Mark III with a Canon EF 24-105mm f/4L IS USM lens. Length: 2820mm, width: 2160mm, height: 2600mm, very little documentation available, an inspection is possible.
used
Reference ID PP-27726 Category Rigid Box Manufacturer Emmeci Model MC2004 MEB Year Built 2008 Color - Impression - Working Hours - Speed - - size 600x400x190mm Min. Size 83x31x12mm Condition Good Location Europe Availability Immediately Machine Description Suction belt width: 720mm Speed cycles/min: 36 Roll diameter corner lock : 400mm dimension d. Cuts: min. 180x95mm, max. 900x760mm Box format: min. 83x31x12mm, max. 600x400x190mm
used
Angular gears, gearboxes VOGEL MH 23 ( MH23 ) i = 1,0 A. - No.: R 5454 001 Hollow shaft diameter ( drive ): Ø 28 mm Shaft length: 65 mm Groove width: 8 mm Flange diameter (drive): Ø 130 / 200 mm bolt circle diameter: Ø 165 mm hole diameter: Ø 10,5 mm Hollow shaft diameter ( output ): Ø 32 mm Wavelength: 174 mm groove width: 10 mm all hole spacing (housing): 110 mm all threaded holes: M10 x 1.5, Depth: 25 mm used, checked ! Dimensions: 290 x 200 x 200 mm
used
Label dispenser Macro SP12 right side RA1956 Manufacturer: Schwinn Model: Macro SP 12 Year of manufacture: 2018 Alignment: right Label passage: up to 115 mm Label speed: 1-18 m/min Maximum diameter label roll: 300 mm Core diameter 40 mm expandable with adapter Power supply: Euro plug 230/50Hz Integrated control with control parameters, controllable inputs and outputs, fault messages,... Additional equipment: Start triggering external AP 010-500 Vacuum Applicator Module Maintenance - equipment - combination Core adapter AP 031 Prewarning - label supply Mounting frame Control box Warning light, 3-stage Features: nominal voltage: 50Hz, 230 maximale Etikettengröße: 115 Etikettengeschwindigkeit: 1-18 m/min Kerndurchmesser Rolle: 40 mm maximale Größe Etikettenrolle: 300 Etikettendrucker enthalten?: NEIN Etikettenaplikator?: Stempel Vorwarnung Etikettenvorrat: JA Hub Aufklebestempel: 500 m ...
used
Transnorm curved belt conveyor right 40°-780-600 RA1848 Make: Transnorm Running direction: 40° right running belt conveyor width (RB): 600 mm Nominal/outer width (NB): 780 mm Inner radius (IR): 600 mm V230/400 kw 0,37 Height frame: 280 Scope of delivery:with motor, without supports (please enquire if required) Optionally available: Supports Side guide one and both sides frequency inverter Features: Construction year: 1996 condition: good (used) Nominal / inner radius in mm: 600 Nominal / outside width in mm: 780 Belt width in mm: 600 angle: 40° Driven: YES Running direction: RIGHT Engine type: SEW Eurodrive KW: 0,37/S1 Conveyor speed m / s: 0,92 scope of delivery: without supports and side guides For individual, expert advice, simply get in touch with us. Simply contact us by phone or email. We will be happy to help you plan and implement your projects. We look forward to hearing ...
used
Transnorm belt curve conveyor left GKF 70°-730-600 IR600 RA1936 The Transnorm belt curve is fully functional. It has a gear motor of the brand SEW. Supports and are not included in the scope of delivery. They are optionally available on request. Belt curves are often used in intralogistics for the internal transport of unit loads and are indispensable in modern distribution centers. Transnorm belt curves convince with performance and reliability. Thanks to a low-tension drive over the entire belt width, long operating times are no problem. Conical drums and a specially developed belt guide system ensure the highest possible running smoothness. Technical data: Frame width (NB): 730 mm belt width (GuB): 550 mm height (BH): 210 mm Inner radius (IR): 600 mm Conveying angle: 70° degrees support feet: optionally available Conveying speed (v m/s): freely adjustable with frequency converter b ...
used
Transnorm curved belt conveyor right 35°-780-600 IR600 RA1825 Make: Transnorm Running direction: 35° right running belt conveyor width (RB): 600 mm Nominal/outer width (NB): 780 mm Inner radius (IR): 600 mm 3x 300-500V Height frame: 280 Scope of delivery:with motor, without supports (please enquire if required) Features: Construction year: 2001 condition: gut Nominal / inner radius in mm: 600 Nominal / outside width in mm: 780 Belt width in mm: 600 angle: 35° Driven: YES Running direction: RIGHT Engine type: SEW Eurodrive scope of delivery: without supports and side guides For individual, expert advice, simply get in touch with us. Simply contact us by phone or email. We will be happy to help you plan and implement your projects. We look forward to hearing from you. With kind regards Your team at Dr. Sonntag GmbH & Co. KG Your specialist and contact for intralogistics
used
Transnorm curved belt conveyor right 90°-780-600 RA1826 Make: Transnorm Running direction: 90° right running belt conveyor width (RB): 600 mm Nominal/outer width (NB): 780 mm Inner radius (IR): 600 mm V 220/380 Conveying speed: 1.05m/s Height frame: 210 Scope of delivery:with motor, without supports (please enquire if required) Features: Construction year: 1990 condition: gut Nominal / inner radius in mm: 600 Nominal / outside width in mm: 780 Belt width in mm: 600 angle: 90° Driven: YES Running direction: RIGHT Engine type: SEW Eurodrive KW: 0,37/S1 Ampere: 1,00, 1,75 scope of delivery: without supports and side guides For individual, expert advice, simply get in touch with us. Simply contact us by phone or email. We will be happy to help you plan and implement your projects. We look forward to hearing from you. With kind regards Your team at Dr. Sonntag GmbH & Co. KG Your specia ...
used
Transnorm belt curve conveyor right GKF 22.5°-850-650 IR1200 RA1523 The Transnorm belt curve is in good condition (used) and fully functional. It has a gear motor of the brand SEW. Supports and are not included in the scope of delivery. They are optionally available on request. Belt curves are often used in intralogistics for the internal transport of unit loads and are indispensable in modern distribution centers. Transnorm belt curves convince with performance and reliability. Thanks to a low-tension drive over the entire belt width, long operating times are no problem. Conical drums and a specially developed belt guide system ensure the highest possible running smoothness. The pictures of the conveyor system shown here were taken in a logistics center while still installed. Technical data: Conveying length middle radius (NL): 726 mm Frame width (NB): 850 mm belt width (GuB): 650 mm ...
used
Transnorm spiral helix belt curve conveyor right 90°-840-650 IR600 RA1869 The Transnorm belt curve is in good condition (used) and fully functional. It has a gear motor of the brand SEW. Supports and are not included in the scope of delivery. They are optionally available on request. Belt curves are often used in intralogistics for the internal transport of unit loads and are indispensable in modern distribution centers. Transnorm belt curves convince with performance and reliability. Thanks to a low-tension drive over the entire belt width, long operating times are no problem. Conical drums and a specially developed belt guide system ensure the highest possible running smoothness. Technical data: Type designation: Belt curve conveyor TS 1600-105 Frame width (NB): 840 mm belt width (GuB): 650 mm height (BH): 210 mm Inner radius (IR): 600 mm Conveying angle: 90° degrees Incline: 210 mm ...
used
Transnorm curved belt conveyor right bend 125°-775-600 IR600 RA2012 Technical details: Manufacturer: Transnorm Type: Belt Curve 125° right TS 1500-100 Curved belt conveyor Year of manufacture: 2001 Angle: 125° Running direction: right inner radius (IR): 600 mm belt width (GB): 600 mm Speed: please contact, motor not yet mounted Belt type: smooth, KT36 Drive location: outside pulling Condition: good condition / fully functional Scope of delivery: without supports & sideguide (please inquire if required) Optional: supports & sidequides Price plus VAT ex central warehouse Dr. Sonntag GmbH & Co. KG 97076 Würzburg Features: condition: good (used) Nominal / inner radius in mm: 600 Nominal / outside width in mm: 670 Belt width in mm: 600 angle: 109° Driven: YES Running direction: RIGHT Engine type: SEW Eurodrive Conveyor speed m / s: 1,0 scope of delivery: without supports and side ...
used
Transnorm belt curve conveyor left GKF 70° degrees-770-600 IR600 RA1415 The Transnorm belt curve is in good condition (used) and fully functional. It has a gear motor of the brand SEW. Supports and are not included in the scope of delivery. They are optionally available on request. Belt curves are often used in intralogistics for the internal transport of unit loads and are indispensable in modern distribution centers. Transnorm belt curves convince with performance and reliability. Thanks to a low-tension drive over the entire belt width, long operating times are no problem. Conical drums and a specially developed belt guide system ensure the highest possible running smoothness. The pictures of the conveyor system shown here were taken in a logistics center while still installed. Technical data: Conveying length middle radius (NL): 1100 mm Frame width (NB): 770 mm with Motor 940 mm be ...
used
Transnorm right flush roller conveyor 3470-1830-1450 RA1855 Make: Transnorm Basic dimensions: conical structure, 3470x1160-1830 mm Length: 3470 mm Nominal/external width (NB): 1160-1830 mm Roll length (RB): 160-450 mm & 640-1000 mm Frame height: 290 mm Currently set height: 640 mm Height of side guide: 410 mm Width (height) side belt 300 mm Roller diameter: 50 mm Roller pitch: 65 mm Including 8 feet Motor MOVI-Mot 3x300-500V 1,5kW Conveying speed: Features: Construction year: 2017 Conveying length in mm (NL): 3470 Optional erhältlich: Frequenzumrichter Electric data: 70Hz, 217 / 375 V Antrieb: Nord-Drivesystem Supports: 8 Bauhöhe in mm (BH): 290 Belt width in mm (GuB): 300 Height in mm: 640 Galvanized rollers: Ø = 50 mm scope of delivery: including supports and side guides, Kabel, ohne Frequenzumrichter Roll width in mm: 160-450, 640-1000 condition: Ausstellungsstück Roll division i ...
used
Transnorm belt curve conveyor GKF 3900-750-550 IR850 RA1382 The Transnorm belt curve is in good condition (used) and fully functional. It has a gear motor of the brand SEW. Supports and are not included in the scope of delivery. They are optionally available on request. Belt curves are often used in intralogistics for the internal transport of unit loads and are indispensable in modern distribution centers. Transnorm belt curves convince with performance and reliability. Thanks to a low-tension drive over the entire belt width, long operating times are no problem. Conical drums and a specially developed belt guide system ensure the highest possible running smoothness. The pictures of the conveyor system shown here were taken in a logistics center while still installed. Technical data: Type designation: Belt curve conveyor TS 1600-105 Conveying length middle radius (NL): 3900 mm Frame wi ...
used
Transnorm belt curve conveyor right GKF 20°-750-550 IR1300 RA1477 The Transnorm belt curve is in good condition (used) and fully functional. It has a gear motor of the brand SEW. Supports and are not included in the scope of delivery. They are optionally available on request. Belt curves are often used in intralogistics for the internal transport of unit loads and are indispensable in modern distribution centers. Transnorm belt curves convince with performance and reliability. Thanks to a low-tension drive over the entire belt width, long operating times are no problem. Conical drums and a specially developed belt guide system ensure the highest possible running smoothness. The pictures of the conveyor system shown here were taken in a logistics center while still installed. Technical data: Type designation: Belt curve conveyor TS 1600-105 Conveying length middle radius (NL): 640 mm Fr ...
used
Technical details: Manufacturer: Transnorm Type: belt curve 60° TS 1500 100 belt bend conveyors POS. 164 Year of construction: 1996 Angle: 60° Direction: Right Nominal radius: approx. 600 mm Width: 400 mm Usable width be expanded through fit the outer Guide Strap type: KT 58 Number: 1 x (article no. 20140058) Condition: Used / fully functional Color: Grey More information: incl. Guide Gear motor Manufacturer: SEW eurodrive Features: Construction year: 1996 condition: good (used) Nominal / inner radius in mm: 600 Belt width in mm: 500 angle: 60° Running direction: RIGHT Engine type: SEW Eurodrive scope of delivery: including side guides without supports Für eine individuelle, fachmännische Beratung setzten Sie sich einfach mit uns in Verbindung. Kontaktieren Sie uns einfach telefonisch oder per Mail. Wir helfen Ihnen gerne bei der Planung und Umsetzung Ihrer Projekte. Wir freuen u ...
used
curved belt conveyor curved belt 109° right Transnorm TS1500-100 second-hand machine Technical details: Manufacturer: Transnorm Type: curved belt 109° right TS 1500-100 belt bend conveyors Year of construction: 1999 Angle: 109° Direction: Right Nominal radius RN: 600 mm BN width: 600 mm Speed: v = 1.0 m/s Strap type: smooth, KT36 Drive location: outside pulling Condition: good condition / fully functional Please ask without support, if necessary. Price D-97076 Würzburg from central warehouse Transport dimensions: Lxwxh = 2.4 x 1.10 x 0.40 m Weight: 150 kg Features: condition: good (used) Nominal / inner radius in mm: 600 Nominal / outside width in mm: 670 Belt width in mm: 600 angle: 109° Driven: YES Running direction: RIGHT Engine type: SEW Eurodrive Conveyor speed m / s: 1,0 scope of delivery: without supports and side guides Für eine individuelle, fachmännische Beratung ...
used
curved belt 60° right Transnorm TS1500-80 Built in 2007 Direction: right Width: 500 mm Inner radius: 600 mm with guiding systems inside and out Drive location: outside pulling constant speed v = 0.75 m/sec. incl. 3 supports Features: Construction year: 2007 condition: very good (used) Nominal / inner radius in mm: 600 Belt width in mm: 500 angle: 60° Driven: YES Running direction: RIGHT Engine type: SEW Eurodrive Conveyor speed m / s: 0,75 scope of delivery: including side guides, including support with three feet Für eine individuelle, fachmännische Beratung setzten Sie sich einfach mit uns in Verbindung. Kontaktieren Sie uns einfach telefonisch oder per Mail. Wir helfen Ihnen gerne bei der Planung und Umsetzung Ihrer Projekte. Wir freuen uns darauf von Ihnen zu hören. Mit freundlichen Grüßen Ihr Team der Dr. Sonntag GmbH & Co. KG Ihr Spezialist und Ansprechpartner für Intralo ...
used
curved belt conveyor curved belt 30° right Transnorm TS1500-80 second-hand machine Technical details: Manufacturer: Transnorm Type: curved belt 30° right TS 1500-80 belt bend conveyors Year of construction: 2008 Angle: 30° Direction: Right Nominal radius/radius of indoor RN: 1630 mm BN width: 510 mm Total width: 640 mm Drive location: outside pulling installed power: 0.37 kW constant conveyor speed: v = 0.9 m/sec. Please ask without support, if necessary. Price D-97076 Würzburg from central warehouse Transport dimensions: L x W x H = 900 x 800 x 700 Weight (gross): 90 kg Features: Construction year: 2008 condition: very good (used) Nominal / inner radius in mm: 1630 Nominal / outside width in mm: 640 Belt width in mm: 510 angle: 30° Driven: YES Running direction: RIGHT Engine type: SEW Eurodrive KW: 0,37/S1 Conveyor speed m / s: 0,90 scope of delivery: without supports and si ...
used
curved belt conveyor curved belt 45° right Transnorm TS1500-80 second-hand machine Technical details: Manufacturer: Transnorm Type: curved belt 45° right TS 1500-80 belt bend conveyors Year of construction: 2008 Angle: 45° Direction: Right Nominal radius/radius of indoor RN: 2480 mm BN width: 700 mm Drive location: outside pulling installed power: 0.37 kW Please ask without support, if necessary. Price D-97076 Würzburg from central warehouse Transport dimensions: L x W x H = 1800 x 1100 x 600 Weight (gross): 120 kg Features: Construction year: 2008 condition: very good (used) Nominal / inner radius in mm: 2480 Nominal / outside width in mm: 800 Belt width in mm: 700 angle: 45° Driven: YES Running direction: RIGHT Engine type: SEW Eurodrive KW: 0,37/S1 Conveyor speed m / s: 0,5 scope of delivery: without supports and side guides Für eine individuelle, fachmännische Beratung ...
used
Transnorm curved belt conveyor right bend 90°-800-700 IR900 RA2080 Technical data: Manufacturer: Transnorm Condition: good (used) conveying angle: 90° nominal/external width (NB): 800 mm belt width (GB): 700 mm innerradius (IR): 900 mm overall height (BH): 210 mm motor height (MH): 450 mm Motor type: SEW gear motor, SA37/T DT71D4/TH Electrical Data: 380-500 V, 0,37 kW Conveying speed: 1x 0,67 m/s, 2x 0,25 m/s, 1x 0,33 m/s or 1x 0,83 m/s Scope of delivery: without supports (if required, please contact us) Optional: supports Side guides Frequency converter for stepless speed control Price plus VAT ex central warehouse Dr. Sonntag GmbH & Co. KG 97076 Würzburg Features: Construction year: 2008 condition: very good (used) Nominal / inner radius in mm: 900 Nominal / outside width in mm: 800 Belt width in mm: 700 angle: 90° Driven: YES Running direction: RIGHT Engine type: SEW Eurodrive KW ...
used
Transnorm belt curve conveyor GKF 1650-750-550 IR600 70° right RA1441 The Transnorm belt curve is in good condition (used) and fully functional. It has a gear motor of the brand SEW. Supports and are not included in the scope of delivery. They are optionally available on request. Belt curves are often used in intralogistics for the internal transport of unit loads and are indispensable in modern distribution centers. Transnorm belt curves convince with performance and reliability. Thanks to a low-tension drive over the entire belt width, long operating times are no problem. Conical drums and a specially developed belt guide system ensure the highest possible running smoothness. The pictures of the conveyor system shown here were taken in a logistics center while still installed. Technical data: Type designation: Belt curve conveyor TS 1600-105 Conveying length middle radius (NL): 1650 ...