138,303 used machines on RESALE, but how to find them? Machine Search
bore capacity in steel (diameter): 40 mm continious capacity: 25 mm throat: 315 mm bore stroke: 200 mm bore depth: 280 mm spindle taper MT: 4 feed range: 0,1-1,5 U/min number of feeds: 9 column diameter: ca. 230 mm table-size: 700 x 600 mm surface area: 450 x 560 mm distance spindle/base plate: 1100 mm dimensions: ca. 1000 x 700 x 2400 mm total power requirement: 2,6 kW weight of the machine ca.: 1,1 t emergency stop switch renewed The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
bore capacity in steel (diameter): 40 mm throat: 345 mm bore stroke: 180 mm spindle turning speed range: 25-640 U/min column diameter: 180 mm table-size: Ø ca. 560 mm surface area: Ø 445 mm feeds: 0,1, 0,2, 0,3 mm/U spindle taper MT: 4 weight of the machine ca.: 1 t dimensions: ca. 650 x 1000 x 2100 mm with thread cutting device foot switch With coolant device in the base steplessly variable speeds, 2 gear stages, and 2 motor speeds The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Spindle-to-table distance min./max.: 81mm/481mm, counter support spindle center distance: 195mm, spindle head swivel: 360°, milling spindle diameter: 70mm, spindle adjustment: 100mm, headstock adjustment: 300mm, table dimensions X/Y: 480mm/820mm, travel X/Y/Z: 500mm/200mm/400mm, max. workpiece length: 400mm, spindle speed: 1600rpm, feed X/Y: 500mm/min, feed Z: 250mm/min, spindle head swivel: +/-30°, machine dimensions X/Y/Z: approx. 1600mm/2550mm/1700mm, weight: approx. 2300kg. The machine was electrically tested at the end of 2025 and a defect of the emergency stop switch was discovered. Documentation available. On-site inspection is possible.
Controls: HEIDENHAIN TNC 426, connected load: 7.7kW, including Rotator 3R WorkPal, with documentation, without spare parts.
ID3701 Nordmeyer 3/14 year/Baujahr 2012 19.400 hours/hours Drilling rig, 219 mm head, up to 600 m drilling depth, jaws 344 Drilling rig, 219 mm head, up to 600 m drilling depth, jaws 344
Year of construction 2000 Control Siemens CNC 840D Drilling capacity 2.8 - 25 mm max. drilling depth 700 mm Clamping table 600 x 800 mm with hole grid Drill carriage: torque 20 Nm Travel distance 1000 mm Feed rate 0 - 15,000 mm Coolant frequency-controlled Ring Compact Filter 120l/min Accessories: Cantilever belt conveyor Weight approx. 3000 kg
T type milling machine TIGER TMT 5 RT - CNC SELCA 4045 - head type T30 Index 2,5°, Rotary table capacity 6.000 kg, CNC SELCA 4045, Information about technical data are not binding., Machine available subject to prior sale., Rotary table dimension: 1550x1300 mm, Maximum table load: 6.000 Kg, Cross travel x axis: 2000 mm, Vertical travel y axis: 1550 mm, Longitudinal travel w axis: 1050 mm, Working feed x-y-w axes: 0 - 60.000 mm/1, Rapid feed x-y-w axes: 12.000 mm/1, Spindle taper: 50-DIN69871, Spindle speed: 0 - 3000 rpm, Number of spindle speeds: 2, Cnc: SELCA 4045, Weight: 15.000 Kg
Paper drill Nagel Citoborma 290 AB Year of manufacture 2015 Art.Nr. L1131
Key data: 100 mm, 3000 mm
Radial drilling machine CSEPEL RFH-100 / 3000 – technically flawless Description: For sale is a used radial drilling machine / column drilling machine / column drilling machine from the manufacturer CSEPEL, type RFH-100 / 3000. The machine is technically flawless and ready for use in the workshop or production. It is ideal for drilling work on medium to large workpieces. Technical data: Manufacturer: CSEPEL Type: RFH-100 / 3000 Drilling capacity: 100 mm Projection: approx. 3,000 mm Speed range: 18 – 1,800 rpm Spindle holder: MK6 Spindle stroke: approx. 400 mm Feed rate: 0.0375 – 2.0 mm/rev Connected load: 15 kW / 380 V Dimensions (L × W × H): approx. 4,400 × 1,600 × 4,200 mm Condition: technically perfect Changes and errors in the technical data, specifications and prices as well as prior sale reserved.
ID3701 Nordmeyer 3/14 year/Baujahr 2012 19.400 hours/hours Drilling rig, 219 mm head, up to 600 m drilling depth, jaws 344 Drilling rig, 219 mm head, up to 600 m drilling depth, jaws 344
WORKING RANGE, Longitudinal (X) 1250 mm, Vertical (Y) 1000 mm, Transversal (Z) thread axis 380 mm, Drilling depth (V) 1000 mm, Drilling head inclination ( C) +/-20 °, Table rotation (B) 360,000x0.001 °, Workpiece approach (W) 500 mm, CNC, Measuring system optical scales, CNC SELCA 4040D, DRILLING UNIT, Min-max diameter from solid 5-40 mm, Spindle power 10 Kw, Rotation speed 4.200 Rpm, Drilling type gundrill, Drilling head inclination ( C) 40 (+/-20) °, FEEDS, X rapid 10 m/min, Y rapid 10 m/min, Z rapid 10 m/min, V rapid 10 m/min, TABLE, Surface 1000x800 mm, Resolution (B axis) 0.001 °, Tilting +/- 22,5°, Capacity 4.000Kg / d, COOLANT SYSTEM, Tank capacity 650 l, EXTRA, Total installed power 30 Kw, Machine weight 17.500 Kg, Machine dimensions 5000x2600x3300 mm, Information about technical data are not binding., Machine available subject to prior sale.
Holzprofi Maker Special Column Drill M1-BM4117S-Variotouch with Stepless Speed The brushless motor is directly controlled without a belt drive! It features an electronic control system with a combined chip and software control system. It features a touchscreen display, thread cutting device, automatic start and stop function when the spindle is operated, forward/reverse rotation, LED light, and cross-line laser. With extra robust table - also suitable for vices. Technical data: Motor power 1.6 kW (= 2 kW S6) Motor voltage 230 volts Quill taper MT 3 Quill stroke 120 mm Drill chuck 3-16 mm Speeds 150-3200 rpm Column diameter 80 mm Table dimensions 345 x 345 mm Base dimensions 520 x 320 mm Table tilt 90° left/right
Drilling and milling machine Hans Schreiner ZAY7040G, built in 2009, very good condition, 1.5 kW, 800 mm table length, 240 mm table width, 300 kgPrices subject to change, errors, printing and typesetting errors excepted
Drill Optimum B32, good condition, incl. MK4 mount, 225 mm stop, 125 mm quill strokePrices subject to change, errors, printing and typesetting errors excepted
Automatic multiple drilling machine for chair seats CAMAM mod. FMV/4U with 4 drilling units - N. 4 independent drilling units - Control panel - Year 1996 - CE compliant
Frame dowel and slotted hole drilling machine from Hofmann HT 200 U with angle adjustment Special drilling machine for staircase construction, window construction and universal use by pneumatic height adjustment. Angled dowels and picket holes are easy thanks to the rotatable drilling unit realizable. Motor pole-switchable, two speeds Motor power 1.5 / 1.8 kW, 1400 / 2800 rpm Start of the motor with practical handle switch Precision Chuck with Two Inserts 16mm and M10 Thread Table size approx. 1100 x 240mm Linear laser for exact positioning of the workpiece Drilling unit can be rotated 65 degrees to the left and right Pneumatic adjustment of the processing height, dowels on two levels without changing The desired drilling heights can be achieved for each drilling level with a handwheel and digital counter , the changeover is then pneumatically done from the front Transve ...
bore capacity in steel (diameter): 23 mm throat: 220 mm bore stroke: 120 mm Number of revolutions: 25 - 3.200 U/min distance Spindlenose and center of table: 275 mm table surface area: 300 x 355 mm T-slots: 3x T - slots distance: 120 mm column diameter: 110 mm total power requirement: - kW weight of the machine ca.: ca. 120 kg dimensions of the machine ca.: 0,8 x 1,0 x 1,9 m Table Drilling Machine IXION - BT 23 ST - incl. base cabinet The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
bore capacity in steel (diameter): 25 mm throat: 220 mm bore stroke: 110 mm taper MK: 3 MK table-size: 350 rund mm feeds: mm/U turning speeds: 100 - 2080 U/min connected load frequency: 400 V total power requirement: 0,9 KW weight of the machine ca.: 0,2 t dimensions: 0,8 x 0,6 x 1,9 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Technical data: - Drilling capacity 25 mm - Drilling spindle holder MK 3 - Drilling spindle speeds 100 / 205 / 345 / 440 rpm - 695 / 885 / 1450 / 2900 rpm - Drilling spindle stroke 130 mm - Drilling spindle projection 260 mm - Coordinate table with 3 T-slots 580 x 240 mm - Table travel X-axis 415 mm - Y-axis 155 mm - Drive 400 V / 0.75 / 0.9 kW - Space requirement approx. W 900 x H 1800 x D 700 mm - Weight approx. 270 kg - Machine vise
taper MK: 2 Dimensions (L/W/H): 800 x 400 x 1500 mm weight: 300 kg The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
bore capacity in steel (diameter): 50 mm throat: 350 mm bore stroke: 180 mm thread capacity: 35 M spindle taper MT: 4 MK column diameter: 150 mm bore spindle turning speed range: 132-1852 U/min table-size: 480x480 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
This Hahn+Kolb Flott P40 drilling machine was manufactured in 1980. It features a continuous drilling capacity of 35/40 mm, a tapping capacity up to M30, and a drilling depth of 160 mm. The machine includes a column diameter of 125 mm and a table surface of 590 x 450 mm. Spindle speeds are variable from 100 to 2,000 rpm. Consider the opportunity to buy this Hahn+Kolb Flott P40 drilling machine. Contact us for more information.
This 3-axis QUICK CNC KQ-63E was manufactured in 2025. Its a multi-spindle drilling machine capable of handling workpieces from 70 to 2800 mm in length and 50 to 1220 mm in width. Features include top and bottom milling spindles, a high-speed tool changer, and brushless servo motors. If you are looking to get high-quality drilling capabilities, consider the QUICK CNC KQ-63E machine we have for sale. Contact us for more information.
Manufacturer: DONAU Model: DR 50 Find more here - .ucymachines/ Contact us at - sales@ucymachines
This 4-axis KOCH BL 2500 NC select line was manufactured in 2019. Ideal for multi-spindle drilling, this machine ensures precision and efficiency in your production line. Consider the opportunity to buy this KOCH BL 2500 NC select line multi-spindle drilling machine. Contact us for more information.
Offer 25032 Technical data: - Drilling capacity in steel ST 60 50 mm - Drilling capacity in steel ST 60 65 mm - Tapping device up to M 60 - Drilling spindle holder MK 5 - Drilling spindle stroke 240 mm - Projection 400 mm - Table with 2 T-slots 720 x 560 mm - max distance table – drilling spindle approx. 850 mm - 4 feeds 0.1 - 0.2 - 0.3 - 0.4 mm/rev - AZ continuously variable transmission with manual transmission - Drilling spindle speeds infinitely adjustable 40 - 1600 rpm - Drive 400 V / 5.5 kW - Space requirement approx. W 850 x H 2480 x D 1350 mm - Weight approx. 1450 kg
Paper drill Dürselen Corta PB 04 N; very good condition; cleaned and tested; 4 drill heads; Drilling lubrication and cooling; Speed regulation; speed table stroke adjustable; max. Stacking height 50mm; insertion depth behind drill 42mm; Sliding table; Hole spacing 31.7-293mm; Endless drilling belt. Paper driller Dürselen Corta PB 04 N; good condition; cleaned and checked; 4 heads; lubrication and cooling system; adjustable drilling speed; adjustable table hub speed; max.pile hight 50mm; depht behind the driller 42mm; slide table; distance between the holes 31,7-293mm; Endless Drill Band.
Vertical Drilling and Milling Center Brother TC-22A with 4th Axis Year of Make: 1999 Control: Brother Technical data: Spindle speed: max. 12,000 rpm Tool holder: BT 30 Number of magazine slots: 26 Travels: X-axis: 500mm Y-axis: 400m Z-axis: 410mm 4th axis: 0.001° Accessories: Nikken Rotary Table Base plate zero point clamping system We have 2 identical machines in stock.
Offered is a used Donau DR 32 rapid radial drilling machine series 731. Tool holder: MK4, spindle stroke: 200mm, outreach: approx. 900mm-1050mm, height adjustment: approx. 400-600mm, speed range: 40-2000rpm, feeds: 0.1/0.2/0.3/0.4mm per revolution, integrated coolant system, equipped with swiveling arm, large T-slot table, weight approx. 1500kg-1800kg, machine dimensions X/Y/Z approx. 1800mm/1000mm/2200mm. Inspection is possible by appointment.
Drilling depth: 60mm, min. workpiece width: 800mm, max. workpiece length: 2500mm, workpiece height range: 10mm-60mm, machine dimensions X/Y: 1400mm/1400mm, weight: approx. 750kg. Documentation available. An on-site inspection is possible.
spindle diameter: 135 mm x travel: 3000 mm y travel: 2000 mm - Z-axis travel: 1600 mm travel -w axis: 700 mm TABLE: table-size: 2000 x 1800 mm table load: 10 t B-axis (table): 0,001 ° MILLING SPINDLE / HEAD: - spindle revolutions (max): 5 - 2000 U/min - spindle diameter: 135 mm - tool fixture: ISO SK 50: BT 50 TOOL MAGAZINE: - number of positions: 40 feed: 1 - 4000 mm/min rapid traverse: 8 m/min control: Fanuc 16i-MB total power requirement: 42 kVA weight of the machine ca.: 37,2 t dimensions of the machine ca.: 6,3 x 6,9 x 4,79 m equipped with: - CNC Control Fanuc 16i-MB - NC-Rotary Table 1800x2000mm - ATC 40-fold (BT 50) - COOLANT THROUGH THE MAIN AXIS - Chip Conveyor - CE The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Key data: 100 mm, 1600 mm, 1120 mm
Spindle diameter ... 100mm Axis X ... 1600mm Axis Y ... 1120mm Spindle speed ... 0-1200 rpm Axis W ... 900mm Axis Z ... 1250mm Spindle mount... ISO 50. Clamping table surface... 1250 x 1250mm Max. table load ... 3000kg Main engine power ... 11kW L x W x H ... 6710 x 3450 x 3000mm Machine weight ... 14 000kg The machine is in good condition, possible to test under power.
bore capacity in steel (diameter): 40 mm arm length: 1600 mm bore capacity in cast iron: 60 mm spindle diameter: 85 mm quill stroke: mm tool taper: MK 5 speeds: 24 - 1050 U/min feeds: 0,06 - 1,0 mm/U column diameter: 345 mm vertical adjustment of the arm: 900 mm thread cutting attachment: ja Boring motor: 5,5 kw total power requirement: 7,5 kW weight of the machine ca.: 4000 kg dimensions of the machine ca.: 2,5 x 1,0 x 2,99 m Radial drilling machine - Mounting cube 750 x 500 x 500 mm - Digital display for boom travel - Coolant system - Good condition The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Technical data: Installed power: 0.58 kW Voltage: 380 V Spindle speed: max. 3000 rpm
taper MK: 2 : ja weight of the machine ca.: 200 kg The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
This QUICK CNC KQ-62 Lite multi-spindle drilling machine was manufactured in 2025. It handles workpieces from 70 to 2400 mm in length, 9 to 60 mm in thickness, and 30 to 1220 mm in width. Features include a Higerman control system, dual 3.5 kW milling spindles at 18000 rpm, and comprehensive drilling units. Consider the opportunity to buy this QUICK CNC KQ-62 Lite multi-spindle drilling machine. Contact us for more information.
taper MK: 1 bore capacity in steel (diameter): - mm weight of the machine ca.: 140 KG The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
WORKING RANGE, Longitudinal (X) 1250 mm, Vertical (Y) 1000 mm, Transversal (Z) thread axis 380 mm, Drilling depth (V) 1000 mm, Drilling head inclination ( C) +/-20 °, Table rotation (B) 360,000x0.001 °, Workpiece approach (W) 500 mm, CNC, Measuring system optical scales, CNC SELCA 4040D, DRILLING UNIT, Min-max diameter from solid 5-40 mm, Spindle power 10 Kw, Rotation speed 4.200 Rpm, Drilling type gundrill, Drilling head inclination ( C) 40 (+/-20) °, FEEDS, X rapid 10 m/min, Y rapid 10 m/min, Z rapid 10 m/min, V rapid 10 m/min, TABLE, Surface 1000x800 mm, Resolution (B axis) 0.001 °, Static capacity 4.000Kg / dynamic 8.000 Kg, COOLANT SYSTEM, Tank capacity 650 l, EXTRA, Total installed power 30 Kw, Machine weight 17.500 Kg, Machine dimensions 5000x2600x3300 mm, Information about technical data are not binding., Machine available subject to prior sale.
spindle diameter: 130 mm x-travel: 6500 mm y-travel: 2000 mm z-travel: 900 mm W-axis (spindle longitudinal): 800 mm spindle motor: kW spindle turning speed range: 5 - 1000 U/min total power requirement: 30 kW weight of the machine ca.: 35,5 t dimensions of the machine ca.: - m - Spindle mount: SK 50 - Table size: 1800 x 2000 mm,10t - Angle head - Faceplate with faceplate slide U: 320 mm, - Heidenhain digital Readout, - Counterholder - 2 plate fields The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
spindle diameter: - mm x-travel: 1600 mm y-travel: - mm total power requirement: - kW weight of the machine ca.: 13,7 t dimensions of the machine ca.: - m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Inv. Num. : 8987 Type: WD 130 Producer: TOS Generated: Parameters: Maximum spindle speed: 2000 1/min X-axis travel: 6400 mm Y-axis travel: 2500 mm Z-axis travel: 430 mm Without a table.
x-travel: 780 mm y-travel: 560 mm z-travel: 560 mm total power requirement: --- kW weight of the machine ca.: 12,0 t dimensions of the machine ca.: --- m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
IXION AUERBACH TL 1004 deep hole drilling machine was built in 2004 in Germany by Ixion Auerbach Maschinenfabrik GmbH. The machine is designed for precision drilling of deep holes with a maximum depth of 1000 mm. Workpieces made of various types of material are machined fully automatically by means of precisely guided tools, which keeps the hole perfectly straight. All machining parameters are programmed in an advanced control system with many useful functions. The offer also includes an extensive equipment, consisting of, among others, a measuring probe, gun drills and a chip conveyor. The IXION TL1004 deep hole drilling machine weighs 3500 kg. Technical specifications of the IXION AUERBACH TL 1004 deep hole drilling machine - maximum drilling depth: 1000 mm - maximum hole diameter: 32 mm - minimum hole diameter: 6 mm - drilling capacity in 1.2312 steel (carbide gun drill): fi 25 ...
Used machine Rows of holes Dowel drills Manufacturer: Ganner Type: Gannomat 120 Year of manufacture: unknown Power: 1.1 kW Working range: Drilling stroke: 120 mm
Number of spindles in row of holes: 11 Number of spindles horizontal: 3 Cup belt drill head: yes, Blum Drill pitch: 32mm Power consumption: 2.2kW
spindle diameter: 130 mm x-axis: 4000 mm y-axis: 2100 mm z-axis: 1500 mm w-axis: 700 mm spindle taper: BT 50 spindle turning speed range: 2500 U/min spindle drive: 22 / 26 kW table surface area: 1600 x 2000 mm table load: 12 t B-axis (table): 0,001 ° feeds longditudinal/cross/vertical: 5000 mm/min rapid motion -longitudinal/cross/vertical: 15 / 12 / 15 m/min Control: Fanuc 0i MF total connected load: kW weight of the machine ca.: 35 t dimensions of the machine ca.: 7,5 x 6,7 x 4,5 m Equipped with: - FANUC 0i MF (10.4” LCD) - Data Server + AICC II - ATC for 60 Tools (BT 50) - X/Y/Z axis THK roller linear guide way - X/Y/Z axis Haidenhain linear scales - Coolant thru spindle 40bar - Spindle oil cooler - Hydraulic cooler - Air conditioner - Chip conveyor Operating Hours: 14761h Cutting Hours: 4382h The data for this ad was created with ModulMWS - the software solution of LogoTech oHG. ...
Code: 0072 Brand: T.O.P. ITALIA Model: FS 850 - CE Standard Drilling and inserting gluing machine + dowel pins on horizontal workpieces for furniture, custom-made furniture, kitchens, bathroom furniture - CE Standard - Year 2018 Technical data: Maxworkable length mm 1600 Max workable height 850 Panel thickness mm 8 - 50 Independent drilling aggregate: Rotation speed 6000-18000 rpm - Max drilling depth mm 35 - Drilling depth adjustment - Hole cleaning system Glue + dowel insertion unit: Dowel dimensions mm 8 x 30 - Max dowel protrusion 15 mm Glue and water system: Container for automatic glue feeding and system cleaning Feeder for automatic pin loading Numerical control and operator interface: Albatros numerical control for 4-axis control - Touch screen supervisor PC - Monitor 12" TFT - Windows operating system - Parametric CAD 3D TPAEdi32 Compressed air 6 bar Overall ...
Inv. Num. : 9019 Type: W 100 A Producer: TOS Generated: Parameters: Work table length: 1250 mm Work table width: 1250 mm X-axis travel: 1600 mm Y-axis travel: 1120 mm Travel travel Z-axis: 1250 mm
ID3738 Witte Bohrtechnik VSB500-200 year/Baujahr 1991 Trailer-mounted well drilling rig, Hatz engine, 2 hydraulic pumps, direct rotary head, with flushing pump (auxiliary pump) – with Hatz engine, previously drilled to a depth of 60 m – 160/170 mm Trailer well drill, Hatz engine, 2 hydr. Pumps, direct rotary head, with mud pump (auxiliary pump) - with Hatz motor, drilled with it so far: 60 m depth - 160/170 mm
maximum number of results exceeded
please refine your search
