135,618 used machines on RESALE, but how to find them? Machine Search
MAIN MOVEMENTS Maximum drilling depth - Z-axis: 500 mm Table, longitudinal movement - X-axis: 300 mm Table, vertical movement - Y-axis: 300 mm Drilling slide, piece support - W-axis: 50 mm DRILLING SPINDLE Drilling diameter without pre-drill, optimal: 3 – 12 mm Distance between the bits: 250 mm Drilling spindle, rotation speed min - max: 0 - 6.000 rpm Drilling spindle motor power: 7.5 kW (S1) Cannon drill holder, for diameters less than 6 mm: Ø 10 x 40 mm Cannon drill holder, for diameters greater than 6 mm: Ø 25 x 70 mm CLAMPING TABLE Fixed clamping table, surface dimensions: 500 x 600 mm Maximum load capacity of the fixed table: 1.000 kg Standard type clamping slots: 18 mm OIL Cutting oil flow rate: 50 lt./min Cutting oil pressure: 90 bar Hydraulic pump motor power: 7.5 kW Hydraulic pump motor capacity: 600 lt Adjustable temperature: 27°-30°C DIMENSIONS AND ...
used, good condition radial drilling machine / Kesselradiale of Collet and Engelhardt, type BUV 1000 Head is rotating and swiveling. The machine is fully moveable. Technical data Spindle retainer 4 MK Drilling capacity approx. 40 mm RADIUS approx. 900 mm Dimensions L x W H approx. 2100 x 1000 x 2500 mm Weight approx. 2500 kg
Condition: Very good condition Available: Immediately
) for double pot MAKO-DT/130 ) with two drills ) incl. automatic Mittelbohreinstellung ) Cycle time per frame is less than 15 seconds ) Clamping and centering device with pneumatic cylinders, which are vertically and horizontally ) this machine streamlines the beating of wood window
Duration / ALB ear power 30/35 mm thread cutting capacity Max M24 (Steigungsabhängig) hand-reversing switch for forward link. Undervoltage, thermal overload protection, spindle MK 3 drilling depth 180 mm throat depth 260 mm column diameter of 110 mm-usable table surface [BxL] 420 x 340 mm speed display scale drilling depth indicator scale drill depth stop with fine adjustment Table height with rack and pinion motor three-phase of 400 V pole changing bar 1,5/2 kW spindle speed continuously 125-2000 1 / min including drilling package consisting: taper mandrel, Chuck, Vice and T - Groove set. Warranty: 3 years delivery: immediately, free delivery loaded: free House including packaging not the right machine? WE DO ALSO OTHER AFLOAT PRODUCTS - ASK FOR A QUOTE! FLOTT BASE PARTNER .
ear-deep and speed display - digital thread cutter M20 (gradient-dependent) variable speed 125-4000 U/Mon in two stages, stage change of belt apportionment. Drilling capacity 525/30 mm of thread cutting capacity (depending on elevation) M20 spindle MK 3 drilling depth 125 mm projection of 280 mm-usable table surface (pivoting) 420 x 340 mm Feed rate of hand table height with rack machines dimensions (W x D x H) 520 x 820 x 1900 mm motor three-phase 400 V pole changing bar 0.9 / 1.45 kW weight 275 kg
Thread cutting device Freischneiden Setup Drilling depth shut off programmable Drilling depth and speed display - digital Thread cutter M20 (depending on elevation) variable speed of 125-4000 U/mon in two stages, stage change of belt apportionment. Drilling capacity 25/30 mm Spindle MK 3 Drilling depth 125 mm Projection 280 mm Usable surface (pivoting) 420 x 340 mm Feed 0-300 mm / min stepless Table height with rack and pinion Machine dimensions (W x D x H) 520 x 820 x 1900 mm Motor three-phase 400 V pole changing bar 0.9 / 1.45 kW Weight 300 kg Including drilling package consisting: taper mandrel, Chuck, Vice and T - Groove set. Option: spindle stop and chip fracture module 690 EUR DELIVERY: free House including packaging NOT THE RIGHT MACHINE? WE DO ALSO OTHER AFLOAT PRODUCTS - ASK FOR A QUOTE! FLOTT BASE PARTNER .
Drilling depth and speed display - digital Thread cutting device M30 (depending on elevation) R1 spindle speed with continuous transmission speed series 100-2000 1 / min R2 spindle speed with continuous transmission speed range 70-1400 1/min Drilling capacity 35/40 mm Spindle MK 4 Drilling depth 160 mm Throat depth 300 mm Usable surface (pivoting) 590 x 450 mm Feed by hand Table height with rack and pinion Machine dimensions (W x D x H) 610 x 850 x 1920 mm Motor three-phase 400 V pole changing bar 1,5/3,0 kW Weight 420 kg Including drilling package consisting: taper mandrel, Chuck, Vice and T - Groove set. DELIVERY: free House including packaging NOT THE RIGHT MACHINE? WE DO ALSO OTHER AFLOAT PRODUCTS - ASK FOR A QUOTE! FLOTT BASE PARTNER .
Thread cutting device Freischneiden Setup Drilling depth shut off programmable Drilling depth and speed display - digital Thread cutting device M30 (depending on elevation) R1 spindle speed with continuous transmission speed series 100-2000 1 / min R2 spindle speed with continuous transmission speed range 70-1400 1/min Drilling capacity 35/40 mm Spindle MK 4 Drilling depth 160 mm Throat depth 300 mm Usable surface (pivoting) 590 x 450 mm Feed 0-300 mm / min stepless Table height with rack and pinion Machine dimensions (W x D x H) 610 x 850 x 1920 mm Motor three-phase 400 V pole changing bar 1,5/3,0 kW Weight 420 kg Including drilling package consisting: taper mandrel, Chuck, Vice and T - Groove set. Option: spindle stop and modulus of rupture of chip 660 EUR DELIVERY: free House including packaging NOT THE RIGHT MACHINE? WE DO ALSO OTHER AFLOAT PRODUCTS - ASK ...
Technical data: -Drilling capacity approx. 30 mm - spindle mount MT 3 -Spindle speeds in 2 steps continuously variable 80-1400 RPM -Table surface 390 x 420 mm -Drill unit by hand crank height adjustment -min / max distance table / spindle 220 / 580 mm -Drilling spindle stroke 150 mm -Spindle projection powered 280 mm â 400 V / 1.3 / 2.3 kW -Space requirement approx. B 480 x H 880 - H 1200 X 1050 mm -Weight approx. 250 kg -Table base with storage space B 600 x h. 910 x H 800 mm -Weight 200 kg
Duration / ALB ear power 35/40 mm Thread cutting capacity Max M30 (Steigungsabhängig) Hand-reversing switch for forward link. Undervoltage, thermal overload protection, Spindle MK 4 Drilling depth 160 mm Throat depth 300 mm 2johiqzz Column diameter 110 mm Usable surface [BxL] 420 x 340 mm Speed display scale Drilling depth indicator scale Drilling depth stop with fine adjustment Table height with rack and pinion Motor three-phase 400 V pole changing bar 1.5/3 kW Spindle speeds with continuously variable transmission 100-2000 1 / min Machine size (WxDxH) 610 x 850 x 1920 mm Weight 420 kg Including drilling package consisting: taper mandrel, Chuck, Vice and T - Groove set. Warranty: 3 years Shipping time: immediately, free loaded DELIVERY: free House including packaging NOT THE RIGHT MACHINE? WE DO ALSO OTHER AFLOAT PRODUCTS - ASK FOR A QUOTE! FLOTT BASE ...
right / left Number of spindles 4 Slide stroke 800 mm Drilling area in steel St-60 Full drilling dia. 15 mm Boring dia. 20 mm Drilling method Single-lip drill
VR 4A/1250 Producer Mas Max. drilling diameter 50 mm Max. vertical arm adjustment 750 mm Taper in spindle 4 Morse Main motor output 4 kW Dimensions l x w x h 2250x1055x2970 mm Machine weight 2700 kg
- Drilling capacity in steel ST 60 40 mm - Drilling capacity in steel ST 60 50 mm - Threading in steel ST 60 to M 42 - Drilling spindle holder MK 4 - Drilling spindle stroke 200 mm - Drilling spindle speeds infinitely adjustable 60 – 1100 rpm - Right - Counterclockwise rotation - 3 feeds 0.1 / 0.16 / 0.25 mm/rev - Projection 350 mm - Max. distance between drilling spindle – table / base plate 790 / 1210 mm - Table with 2 T-slots 630 x 540 mm - Height adjustable via rack with hand crank - Drive 400 V / 1.8 / 3.5 kW - Space requirement approx. W 600 x H 2050 x D 980 mm - Weight approx. 650 kg - with: - Emergency stop button - - Lighting - keyless chuck 1 - 13 mm - Coolant device - Machine vise - various 20 pcs HSS – Twist drill bits 8 – 20 mm
MIKROMAT Model / type:BKoE 630x1000 Technical data: > Mikromat BKoE 630 x 1000 > table clamping surface 1000 x 630 mm > longitudinal travel of the table 710 mm > cross travel of the table 700 mm > travel of headstock 630 mm > spindle stroke 200 mm > distance between spindle nose and table 20-850 mm
ID3420 Geotec Rotomax XL GTCi year/Baujahr 2012 approx. 10,000 hours/hours 15 t Crawler drilling rig, Flush drilling rig, double-head rig, drilling with protective casing, geothermal energy up to 250 m depth - diameter up to 180 mm, well drilling up to 100 m depth - up to 400 mm diameter, power 168 KW, with 150 m drill pipe (90 mm) and 30 m protective piping (178 mm) Crawler drilling rig, flush drilling rig, double-head rig, drilling with protective casing, geothermal energy up to 250 m depth - diameter up to 180 mm, well drilling up to 100 m depth - up to 400 mm diameter, power 168 KW, with 150 m drill pipe (90 mm) and 30 m protective casing (178 mm)
BKOZ 900x1400 spindle taper MK IV sleeve stroke 250mm table size 900x1400mm longitudinal 1000mm cross 750mm vertical movement by the head of main spindle 600mm spindle speeds 28-1400 Upm spindle feeds 0,02-0,8mm/U scales wreaths for all directions of motion hydr. clamping system coolant system sep. control cabinet Motor: 230/380V 50HZ 8KW dimensions base: 3.300 x 2.400mm height: 2.500mm weight: 7.500 kg
Pos. 1.0 Precision Rotary Table Make EIMELDINGEN with aerostatic axial bearing Specifications Table diameter 3,400 mm Total height approx. 1,230 mm Centering bore Ø 250H7X 25 mm Permissible transport load 20,000 kg Holding torque of the table clamping 2,400 daNm Table speed 0.002 – 2 min Net weight approx. 22,000 kg Operating voltage 380 V, 50 Hz. 3 phases Control voltage 24V Positioning accuracy (without control errors) ± 1" Plan accuracy 0.02 mm Axial running accuracy 0.01 mm Concentricity deviation of the centering bore 0.01 mm Resolution of the displacement measuring systems 0.0001° Pos. 2.0 3-Axis Cross Bed Boring Mill Specifications Column stroke transverse "X" 500 mm Carriage stroke horizontal "Z" 650 mm Spindle box vertical "Y" 800 mm Rapid traverse speed Y + Z 8,000 mm/min Feed speed (infinitely adjustable) 0-1000 mm/min ...
Continuous drilling capacity: 25 mm Normal drilling capacity: 30 mm Thread cutting power: M 16 Spindle: MK 3 Drilling depth: 135 mm Spindle speeds infinitely variable: 150 - 3000 rpm Table size: 460 x 360 mm Weight: 225 kg Mains connection: 400 volts, 50 Hz Facilities: - Thread cutting device - Digital display for speed as standard - Coolant device - LED machine light - Stepless speed adjustment - 24 V Electric - Base plate with T-slots - Drilling table adjustable via rack and worm gear and swivelled around column - Emergency-off-strike button - Motor full protection - Star handle - CE compliant
Drill diameter: 2 - 13 mm Tip angle: 90° - 140° Speed: 4800 rpm Connection: 230 V Engine power: 0.18 kW Weight, approx.: 11 kg Dimensions, approx.: 320 x 180 x 190 cm Characteristics: - Ideal for grinding HSS/hard metal spiral drills - Safe operation due to forced grinding - Peak angle adjustable from 90° - 140° - Compact design, with collet storage in the machine and handle for quick storage - Including sharpening device to reduce feed force - Device for back grinding of the drill cuttings to reduce the friction between the drill and the workpiece - Rotor with precision ball bearings Delivery: - Grinding wheel CBN - 11 collet pliers ER 20, 3 - 13 mm - collet holder ER 20
Drill diameter: 13 - 32 mm Tip angle: 90° - 140° Speed: 4800 rpm Connection: 230 V Engine power: 0.25 kW Weight, approx.: 28 kg Dimensions, approx.: 490 x 250 x 260 mm Characteristics: - Ideal for grinding HSS/hard metal spiral drills - Safe operation due to forced grinding - Peak angle adjustable from 90° - 140° - Compact design, with collet storage in the machine and handle for quick storage - Including sharpening device to reduce feed force - Device for back grinding of the drill cuttings to reduce the friction between the drill and the workpiece - Rotor with precision ball bearings Delivery: - Grinding wheel CBN - 20 collet pliers ER 40, 13 - 32 mm - collet holder ER 40 Optional extension, at extra cost: - collet set 5pcs. 8.0 / 9.0 / 10.0 /11.0 /12.0 mm
Drilling capacity max.: 30 mm Thread cutting: M 14 Tool rear ham: MK 3 Spindle speeds, infinitely variable: 150 - 2500 rpm Extension: 265 mm Drilling depth: 150 mm Pinole feed: 0.05 / 0.1 / 0.2 mm/U Column diameter: 92 mm Table size / T-slot size: 500 x 400 mm / 14 mm Engine power: 1.5 kW Machine dimensions (W x D x H): 640 x 850 x 1850 mm Weight approx.: 265 kg Characteristics: - Vario drive for infinitely variable adjustment of the desired speed - Pinole delivery either by hand or by mechanical feed - Set speed by means of digital display quickly and easily readable - Stable casting table with T-slots and coolant gutter - Adjustable drilling depth stop, drilling depth can be read by scale - Thread cutting device - CE / IEC, German documentation and German service Delivery: - Quick-clamp chuck 1 - 16 mm / B 18 - Drill chuck mandrel MK 3 / B 18 - Coolant dev ...
Drilling capacity max.: 35 mm Thread cutting: M 24 Tool rear ham: MK 4 Spindle speeds, infinitely variable: 65 - 2000 rpm Extension: 265 mm Drilling depth: 150 mm Pinole feed: 0.05 / 0.1 / 0.2 mm/U Column diameter: 115 mm Table size / T groove size: 685 x 485 mm / 14 mm Engine power: 1.5 kW Machine dimensions (W x D x H): 950 x 580 x 2000 mm Weight approx.: 385 kg Characteristics: - Vario drive for infinitely variable adjustment of the desired speed - Pinole delivery either by hand or by mechanical feed - Set speed by means of digital display quickly and easily readable - Stable casting table with T-slots and coolant gutter - Adjustable drilling depth stop, drilling depth can be read by scale - Thread cutting device - Gearbox pre-bed - CE / IEC, German Documentation and German Service Delivery: - Table clamping and height adjustment from the front - Quick-clam ...
Type: MZ73031A Number of spindles 3 Distance between first and last spindle 50 mm Adjustable drilling speed Height of the working table 820 mm Table dimensions 735×440 mm Number of clamps 2 Motor power 1,5 kW 400 V Motor r.p.m. 2800 r.p.m Working air pressure 6-8 bar Weight 75 kg Transporting dimensions 900x700x1500 mm
Continuous/normal drilling power (mm) R1 (gemes. Drehmom. Nm) 30/35 (in E3335/ST60) (135) R2 (gemes. Drehmom. Nm) 27/32 (in E335/ST60) (90) Thread cutting performance max. (slope-dependent) R1 M30x3.5 R2 M24x3 Spindle MK IV Drilling depth (mm) 160 Extension (mm) 300 Column diameter (mm) 140 Usable table area (W x D) (mm) 590 x 450 Speed display digital Drilling depth display digital Drilling depth stop with fine adjustment Table height adjustment with rack Spindle/table (mm) 150-700 Machine dimensions without VP (mm) 610 x 900 x 1,980 mm Machine dimensions with VP (mm) 670 x 1,100 x 2,200 mm Motor rotary current 400V with frequency inverter (kW) 4.0 Spindle speeds infinitely variable R1 (1-stage) 0-1000 rpm R2 (1-stage) 0-1600 rpm Feed by hand Weight (kg) 400 Optional (780 EUR) drilling package 5,beststretched from: Vice [felix] 125 Cone mandrel MK III/B ...
Table drilling unit W 100 A Manufacturer: TOS Varnsdorf overhauled: 20125 Spindle diameter ... 100mm Axis X ... 1600mm Axis Y ... 1120mm Spindle speed ... 7-1120 rpm. Axis W ... 900mm Axis Z ... 1250mm ISO 50 Max table load ... 3000kg L x W x H ... 6710 x 3450 x 3000mm Machine weight ... 14000kg Main Engine Power... 11kW Total power demand ... 17kVA Clamping table area ... 1250 x 1250mm Flat disc diameter... 600mm Max circulation diameter ... 900mm The machine is possible to test under electricity, with one-year warranty.
Woelfel B100/S used machine Spindle dia 125mm MK 6 Ram dia 165 mm with stroke 200 mm Spindle speed in 24 steps from 30 - 1200 rpm Vert. travel of headstock 1250 mm Bed clamping surface 870 x 700 mm Additional table 710 x 560mm height 500 mm Height between bed and spindle nose 1460 mm
CATALOG NUMBER M0252 PRODUCT FEATURES The main features of the machine: - Single-head drilling machine for drilling in the range of 0 - 90 ° - Pivoting angle of the head adjusted pneumatically - Possibility to set lateral supports with an accuracy of 0.1 mm - Safety holders allow quick adjustment of panels without adjustment - Spindles adapted for quick couplers - Patented pneumatic clamps of the material - MDF work table - Quick and accurate adjustment - Precise drilling - Italian production Standard equipment of the machine: - 2 aluminum rulers with a length of 1.5 m (right and left) with four stopwatches - 5 quick connectors - Wooden box securing the machine in transport. ADVANTAGES - vertical / horizontal / angled drilling - multi-spindle - new machine - CE certificate - solid - professional TECHNICAL DATA - number of spindles 23 - dista ...
20-90-542 Multeosill Drilling Machine WOODLAND MACHINERY (new) Type: BM21S Number of shafts 21 Adjustable drilling angle Working width 700 mm Table Dimensions 1000 × 900 mm Additional support Ruler 3000 mm Number of Pressers 2 Engine power 1.5 kW 380 V 50 Hz Required Air Pressure 8 bar Drilling Step 32 mm Weight 150 kg Transport Dimensions 1200x1000x1300 mm
bore capacity in steel (diameter): 50 mm throat: 350 mm bore stroke: 180 mm thread capacity: 35 M spindle taper MT: 4 MK column diameter: 150 mm bore spindle turning speed range: 93-1420 U/min table-size: 480x480 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Manufacturer: IMA Bohrgetriebe mit einzel abrufbaren Spindeln, Stück Bohrgetriebe : 1, Number of drilling spindles: 7, Grid 32 mm: yes, Befestigungsschrauben: yes, FREE TEXT: 4 horizontale Spindeln/kw Leistung Motor 2,2 kw,
Manufacturer: Weeke Einheit Bohrgetrtiebe mit 18 Spindeln, Stück Bohrgetriebe : 1, Number of drilling spindles: 18, Grid 32 mm: yes, Run on the machine: weeke 195 T, Price per unit Euro: 2500, Available: 4 Stück, FREE TEXT: 3360 U/min 50-60 Hz/1,5 kw,
Manufacturer: IMA Bohrgetriebe 9 Spindeln, Stück Bohrgetriebe : 1, Number of drilling spindles: 9, Grid: 32, Grid 32 mm: yes, FREE TEXT: 2X Motor ca.0,5 kw,
Manufacturer: IMA Bohrgetrieb, Stück Bohrgetriebe : 1, Number of drilling spindles: 5, Grid: 32, Grid 32 mm: yes, FREE TEXT: Motor ca.0,5 Kw,
The machine is completely overhauled and is then as good as new! The machine gets a completely new electric satisam with our control system. Technical specifications Drilling process: ELB Number of drilling spindles: 1 Min. Drilling diameter 4 mm Max. Drilling diameter 30 mm Max. Drilling depth 600 mm with drilling diameter 4mm / with larger drilling diameters max. Drilling depth 1000 mm Max. Rapid traverse speed X + Z axis 4000 mm / min Max. Rapid traverse speed y-axis 2000 mm Travels X-axis horizontal approx. 700 mm Y-axis vertical approx. 300 mm Z axis designed for max. Drilling depth 1000 mm
distance between spindle and coloumn 1600mm max drilling diameter 50mm machine in good conditions cube included
Manufacturer: Biesse Bohrgetriebe 11 Spindeln, Stück Bohrgetriebe : 2, Number of drilling spindles: 11, Grid 32 mm: 9/2, Sonderteillung Y mm: 2, Befestigungschrauben: yes, Winkelgetriebe: yes, Aluausführung: yes, angetrieben mittig: yes, Schnellwechselfutter: yes, Anschlusspindel mm: 16, Preis pro Stück Euro: 900,
Manufacturer: Biesse Bohrgetriebe, Stück Bohrgetriebe : 4, Number of drilling spindles: 9, Grid 32 mm: 32, Befestigungschrauben: yes, Aluausführung: yes, angetrieben mittig: yes, Schnellwechselfutter: no M10, Anschlusspindel mm: 16, Preis pro Stück Euro: 300,
Manufacturer: Biesse Bohrgetriebe Spindeln, Sonderbohrgetriebe: yes, Stück Bohrgetriebe : 2 , Number of drilling spindles: 11, Grid 32 mm: yes, Sonderteilung X mm: 5 , Sonderteillung Y mm: 3 + 3, Befestigungschrauben: yes, Schnellwechselfutter: yes, Preis pro Stück Euro: 500,
Center of spindle to column bus: 1610~350 mm Max. drilling Ø: 70 mm Spindle end to base work surface: 220 - 1050 mm Spindle stroke: 320 mm Spindle rotation: 30 - 37,5 - 47,5 - 60 - 75 - 95 - 118 - 150 - 190 - 235 - 300 - 375 - 475 - 600 - 750 - 950 - 1180 - 1500 - 1700 rpm Power: 4 kW
In-line drilling rigs with 8 pieces of drilling spindles for the processing of easily machinable materials such as wood - aluminium - non-ferrous metals, composite materials and various plastics. Each of the drilling units produces 450 watts. Infinitely adjustable drilling feed speed Infinitely adjustable drilling depth and return path of the drilling unit. Slanted holes in the range +/- 30°. Pneumatic workpiece tension Table size 3,000 x 800 mm (optionally larger) Working height approx. 870 mm. Horizontal adjustment of the drilling units 240 mm. Vertical adjustment of the drilling units 320 mm. Dimensions 3 x 1.25 x H 1.98 m Weight approx. 1,000 kg
BIESSE - Multi-spindle drilling machine Model BEAVER Year 1982 Manufacture Biesse S.p.A Italy S/N 312/82 Technical data 1 horizontal drilling unit, 21 spindles 2 vertical drilling units, 2x10 spindles, pitch 32 mm horizontal Drilling motor 2.2 kW Vertical drill motor 2 x 1.5 kW Spindle speed 2800 rpm Blade dimensions 10x1.5 mm Operating pressure 0> 6 MPa 7 pcs. pneumatic answers with kSsi control levers Weight 865 kg L x W X H 280cm x 150cm x 150cm
Manufacturer: Biesse Bohrgetriebe 17 Spindeln, Sonderbohrgetriebe: Ja, Stück Bohrgetriebe : 2, Number of drilling spindles: 17, Grid 32 mm: 32, Sonderteilung X mm: 9/7/1, Anschlusspindel mm: 64, Preis pro Stück Euro: 500,
Manufacturer: Biesse Bohrgetriebe, Sonderbohrgetriebe: yes, Number of drilling spindles: 19, Grid 32 mm: yes 13, Raster 16 mm: yes 6/3, Stahlbohrkopf: yes, gelaufen auf Maschine: biesse, angetrieben mittig: yes, Schnellwechselfutter: yes,
In-line drilling rigs with 8 pieces of drilling spindles for the processing of easily machinable materials such as wood - aluminium - non-ferrous metals, composite materials and various plastics. Each of the drilling units produces 450 watts. Infinitely adjustable drilling feed speed Infinitely adjustable drilling depth and return path of the drilling unit. Slanted holes in the range +/- 30°. Pneumatic workpiece tension Table size 3,000 x 800 mm (optionally larger) Working height approx. 870 mm. Horizontal adjustment of the drilling units 240 mm. Vertical adjustment of the drilling units 320 mm. Dimensions 3 x 1.25 x H 1.98 m Weight approx. 1,000 kg
Kramatorsk KJ 1910 10-meter boring depth - Heavy duty: 25-ton workpiece >>> NOTE: MACHINE IS IN OUR WAREHOUSE IN ITALY < < < Heavy duty: Max. work-piece weight 25 tons Spindle motor kW 85 Counter rotation motor 90kW Spindle hole diameter mm 700 Max. boring diameter, mm 600 Center height over the bed, mm 670 Max. work piece external diameter, mm 1300 Work piece length range on one-sided machining, mm 1000...10000 Work piece diameter range, mm: - in chuck of faceplate 200...1100 - in open rest 400...900 - in closed rest 200...630 - in round rest 250...550 Spindle speeds range, rpm 2...200 Machine overall dimensions, approx mtrs 31 x 3 x 2,3 Machine weight, kg 90000 (approx)
Radial drill Soraluce TR3-2500mm. 2500mm arm. Drilling in steel: 80mm. Drilling in cast iron: 100mm. Chuck spindle diameter: 110mm. Cone Morse 6. Speeds: 16 (20-1475rpm). Engine power: 10hp.
Manufacturer: Biesse Bohrgetriebe 6 Spindeln, Sonderbohrgetriebe: yes, Stück Bohrgetriebe : 2, Number of drilling spindles: 5, Grid 32 mm: 32, Raster 16 mm: 16 versatzt, Sonderteilung X mm: 32, Sonderteillung Y mm: 32, Aluausführung: yes, angetrieben mittig: yes, Schnellwechselfutter: yes, Preis pro Stück Euro: 350,
maximum number of results exceeded
please refine your search
