dr hochstrate used for sale

Drilling Ø in steel/GG 20: 40/55 mm Spindle holder: MK 4 Projection: 345 mm Table size: 450 x 600 mm Distance between table and drill quill: 785 mm Quill stroke: 180 mm Spindle speeds in 4 groups by pole-switching. Engine and manual transmission as well as infinitely variable control: 160 - 1540 rpm 4 automatic feeds: 0.09; 0,12; 0.18 and 0.22 mm/rev Drive motor: 380 V, 2.6/3.2 kW Weight: 640 kg Space requirement: 700 x 1150 x 2000 mm

Drilling Ø: 28/35 mm Spindle holder: MK 3 Projection: 293 mm Table size: 400 x 400 mm Table swivel on round column and height-adjustable via hand crank and rack Large distance between table and drill quill: 630 mm Quill stroke: 180 mm Spindle speeds in 4 groups adjustable: 65 - 1750 rpm Drive motor: 380 V, 0.9/1.5 kW Weight: 340 kg Space requirement: 600 x 920 x 1880 mm

Offered is a special drilling and thread-cutting machine Frielingsdorf, equipped with four Ayen drilling units. Machining directions: 3×side, 1×top, setup: rotary indexing table, speed of side drilling units: 960rpm, speed of drilling unit from above: 1400rpm, motor power per drilling unit: approx. 0.73kW, control: conventional. Machine dimensions X/Y/Z: approx. 2600mm, 1500mm, 2600mm, footprint without side lines/containers: approx. 3.5m², weight: approx. 1500kg. Inspection possible by arrangement.

Offer 24456 Technical data: - Drilling capacity in steel ST 60 approx. 60 mm - Drilling capacity boring approx. 80 mm - Thread cutting up to approx. M 40 - Drilling spindle holder MK 5 - Drilling spindle stroke 380 mm - Radius min. / max. approx. 420 / 2000 mm - Column diameter approx. 500 mm - Stroke of the boom approx. 1350 mm - Min. / max. distance: - Spindle – base plate approx. 370 - 1700 mm - Machined base plate clamping surface approx. 1100 - 2300 mm - 12 spindle speeds 19 - 1900 rpm - 9 feeds 0.09 - 0.75 m/rev - Drilling spindle drive 400 V / 10 kW - E - Central clamping - Coolant device - Space requirement approx. W 1400 x H 3400 x D 3600 mm - Weight approx. 7500 kg

Tool holder MK 4 Drilling capacity up to 40 mm steel Clockwise and counterclockwise rotation Stepless speed adjustment with display Automatic feed

: 40 mm : M 24 : M 30 spindle turning speed - stepless: 160-2250 U/min : MK 3 spindle stroke: 120 mm throat: 293 mm column diameter: 115 mm : 515x360 mm distance spindle /table: min./max. 117/701 mm : 2 x 14 x 224 mm feed: 0,1 + 0,2 mm/U Machine height: 1840 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Dowel and stair drilling machine GÖTZINGER RBS swivel with laser very good condition, the machine has been used very little and is as good as new, it comes from an educational institution it can be used to drill dowel holes and similar things the machine has a drill head type BKF-5 with 5 drill bits M10 female thread, the distance between the drill bits horizontally is 32mm, vertically it is 25mm the whole drill head can be swivelled 360° with degree display and different grids, a normal 2-jaw chuck can also be used You also get 3 drill bit holders, for drills with a cylindrical shank of 12 or 16mm, and for drills with an M10 external thread the machine table is 1100mm wide and 250mm deep, there is a stop at the front that can be lowered if necessary for the production of dowel connections there are 2 adjustable angle stops on the machine table, which can be adjusted with an  ...

Key data: 250 t

Press force: 2500 kN Installation height: 800 mm Stroke: 500 mm Table: 900 x 630 mm (1200 x 630 mm) Plunger: 750 x 450 mm (900 x 550 mm) Projection: 360 mm Speed from: 200 mm Speed on: 110 mm Height of the machine: approx. 3,600 mm Weight: approx. 9,000 kg Connection: 20.5 kW Machine can be sold in original condition or overhauled with current UVV

Key data: 160 t

Press force: 1600 kN Installation height: 800 mm Stroke: 500 mm Table: 900 x 630 mm Plunger: 750 x 450 mm Projection: 360 mm Speed from: 200 mm Speed on: 125 mm Height of the machine: approx. 3,450 mm Weight: approx. 7,000 kg Connection: 17 kW Machine can be sold in original condition or overhauled with current UVV

Plant for kilning green malt. Hot air is generated at a steam-heated heat exchanger and passed through the kiln by means of a fan. It is possible to regulate the proportions of fresh and circulating air by means of flaps and a bypass. Control takes place by means of a control cabinet., Additional title: vertical vessel; year of manufacture approx. 2005, Kiln dry capacity: 200 Kg, Width: 1,1 m, Height: 3,2 m, Features: Ventilator (Pollrich Ventilatoren GmbH, 2004), air-shut-off valves (EBRO Armaturen GmbH), circular vessel with Optima strauber-sieve bottom (Steinhaus GmbH), insulated hot water vessel Control cabinet

Beer transport tank in a shipping container, with CIP spray head and manhole. Includes a metering system (max. flow rate: 120 l/min)., Additional title: Stainless steel pressure tank housed in a container, Capacity: 7200 l, Operating pressure: 2,5 bar, Operating temperature: 20 °C, Length: 7,25 m, Width: 2,4 m, Height: 2 m, Features: control, pump, hose reel, flow meter, cable drum, fittings, CIP spray head, manhole

Used bottle washer dryer GAI - 3500 BPHTechnical Specifications & Performance DataThe Bottle Washer Dryer 5008 is a rotary carousel drying unit engineered for reliable bottle handling within a used bottling line or standalone drying station. Manufactured by Cimec, this second hand machine delivers consistent performance for beverage production and industrial packaging applications where efficient moisture removal is required before downstream labeling, capsule application, or case packing.Model: 5008Year of manufacture: 2002Production speed: up to 3,500 bottles per hourBottle formats (volumetric): Compatible with 0.5L and 0.75L bottle formatsBottle geometry: Cylindrical containersBottle diameter range: 60 mm to 115 mmDrying technology: Rotary carousel (hot air) with anti-condensation featuresPLC installed: NoDocumentation: Paper manuals and electrical schematics availableAdvanced Automat ...

Technical Specifications & Performance Data The Used Complete PET Line for Flat Drinks Tea is designed to enhance your beverage production efficiency with a remarkable speed of 22,000 bottles per hour. Manufactured in 2001, this second-hand line offers reliable performance with compatibility for various bottle formats ranging from 0.06 L, 0.10 L, to 0.50 L. This line supports PET container types, making it an ideal choice for flat drinks and tea production. Speed: 22,000 bottles/hour Container Types: PET Bottle Formats: 0.06 L, 0.10 L, 0.50 L Year of Manufacture: 2001 Advanced Automation & Control Systems This industrial packaging solution features state-of-the-art automation provided by leading manufacturers such as Krones and others. The integrated control systems facilitate seamless operations with minimal manual intervention, ensuring precision in filling, labeling, and capping proce ...

Technical Specifications & Performance Data Year 2004 complete PET line, 6000 bottles/hour, isobaric filling. This used configuration from BAT, Kosme, M.A.S is set up for soft drinks and remains in storage. As a compact piece of soft drinks bottling machinery, it covers blow molding through end-of-line packaging. Bottle Formats: 1.5 L, 2 L, 1 L Container Types: PET Product Types: Soft Drinks Speed: 6000 bph Filling: Isobaric (Fill type: 5) Production Year: 2004 Current Status: In Storage Line Composition Blow Molding Machine: Kosme KSB 4 (2004) Premix: M.A.S Mixer (2004) Filling Monoblock: M.A.S 32/32/8 (1999) Labeling Machine: BAT EBI 07 (2006) Shrink Wrapper: BAT 12 packages/min (2005) Advanced Automation & Control Systems Integrated controls coordinate blow molding, premix, isobaric filling/capping, labeling, and shrink wrapping for stable throughput at 6000 bph. Automation supports p ...

Used Krones Filling Line for Flat Drinks in Glass 1997 Manufacturer: KRONES Bought new and installed in 1997 It fills juices, syrups, alcohol Accessories for bottles 0,2 – 0,7 – 1,0 L Capacity: 4,000 L/h Monoblock, frequency regulator Rinser for glass bottles Vacuum filler Krones Capper with Al MCA 28 caps Labeller KRONES–Binetta with precut paper labels, hot glue One label up to half the extent of the bottle (with a possibility for neck), accessories. The control unit replaced in this Krones line There are some conveyor belts in the Krones plant The equipment has relatively few operating hours It has been disconnected for the last 5 years and stored

Used Water Complete Bottling Line Flat Drinks 300 bph 18.9L CapSnap The CapSnap Adapta Series is a modular integrated bottle washing, filling, and capping system. It is the perfect solution for medium-sized HOD water bottling operations. Designed for adaptability – these machines can be configured to handle both 3-Gallon and 5-Gallon bottles. This complete system effectively handles 300 – 600 BPH. Manufacturer: CAP SNAP – Portola – USA Year of production: 1999 (completely refurbished in 2015 and since then it has worked only 500 hours) Capacity: 300 bph Required energy sources: air 6 bar, power 40 kW, cleaning water supply 2 bar and filling water supply Line composition: Semi-automatic cap removal device: This device is used to remove caps from bottles. Entrance conveyor: On this conveyor belt, the bottles are manually placed. Prewash with cold water through nozzles: This is the  ...

Used Rotary Drum Vacuum Filter VELO FRP 10 10MQ This Filter efficiently separates solids from liquids for the bottling and filtration industry. Firstly, Velo produced this model in 2002, equipping it with a rotary vacuum filtration system that enhances separation processes. Moreover, the rotating drum continuously filters the material, optimizing processing time and increasing productivity. As a result, this machine adapts to various liquid types, providing versatile applications for industrial needs. Technical Features of the Used Rotary Drum Vacuum Filter VELO FRP 10 10MQ The Filter VELO FRP 10 uses a rotary vacuum drum system, which is ideal for industrial filtration. For example, the drum immerses itself in the liquid, capturing solid particles on its surface while a vacuum pump extracts the liquid. Consequently, this rotary vacuum filter maintains a constant filtration surface, mini ...

Drill press, drill press, stand drill, pillar drill -Manufacturer: WMW, column drilling machine type CM 10S/55 -Motor: 630 W -Speeds: 460 - 2190 rpm -Translation: via V-belt -Table size: 220 x 280 mm -spindle taper: MK1 -Spindle stroke: 70 mm -Projection: 200 mm -Pillar Ø: 85 mm -Dimensions: 400/800/H1670 mm -Weight 206 kg

little used 1-head drill from Nagel

4 - Head Paper Drilling Machine.

2 head paper drill. Massiv on stand.

Manufacturer: Muhlbock Year of manufacture: 2019 Type: ZLSM3150-3120-1072-11-1306-6,0 Type of machine: Wood drying chamber (kiln) for timber drying Internal length: 2 x 5.00 meters plus 0.72 meters Stack depth: 3 x 1.50 meters plus 2 x 0.10 meters Stack height: 3 x 1.20 meters plus 3 x 0.10 meters plus 0.30 meters Gross stack volume capacity: 162 cubic meters Loading method: Loaded by forklift through an electrically operated lift-folding door with an integrated walk-in door Output quality: The system is designed to maintain the specified wood drying quality while minimizing drying time and cost, according to the manufacturers K5 drying management program Heating capacity: 780 kW, including 858 kW with heat recovery Supply temperature: 95 degrees Celsius Water flow rate: 45 cubic meters per hour Pressure loss: 3.0 mWS / 0.3 bar Supply and return connections: DN 100, PN 10  ...

TECHNICAL DATA: Processing dimensions: max. 1000 x 300 x 70 mm Horizontal Spindles: 5 + 1 Horizontal drill speed: 4500/9000 rpm Horizontal drill bit holder: Ø 16 mm Saw: Ø 130 mm Installed power: 10 kW

Used BERTOLASO WDT10 washer dryer - Year 2001Technical Specifications & Performance DataThe Bertolaso WDT 10 is an external bottle washer-dryer engineered for reliable operation in beverage production and industrial packaging environments. It combines mechanical brushing with targeted water jets to remove residues on the bottle body, bottom, and closure area, followed by high-energy air-knife drying. This second hand unit is well-suited for integration within a used bottling line and provides robust construction for continuous-duty applications.Model: WDT 10Manufactured by: BertolasoYear: 2001Speed: 3.000 - 5.000 BPH Function: External bottle washing and dryingWashing system: Rotating brushes with directed water jetsDrying system: Seven blower motors with high-velocity air blades/hot airBottle handling: Infeed worm screw; infeed and outfeed star wheelsConstruction: Stainless steel frame  ...

TECHNICAL DATA: 02 Drilling spindles (1 HP each) 01 6-spindle mortising unit (2 HP) 02 Workpiece holding piston

Adapter Claas Scorpion on three-point hitch, - with adjustable lower link hooks and removable trailer coupling, - Net weight approx. 190 kg, - KAT 3

x-travel: 1050 mm y-travel: 800 mm z-travel: 560 mm Control: HEIDENHAIN iTNC 530 Tools changer: 30 pos. table-size: 950 mm turning speeds: 28000 U/min output: 55/43,5 kw taper: HSK A 63 a-axis: -10º/+110º ° c-axis: 360 ° Internal cooling system: 10 - 80 bar table load: 800 kg total power requirement: 80 kVA Total weight, approx.: 13 t dimensions of the machine ca.: 3,6 x 3,8 x 3,18 m 5-axis machining centre DMG-MORI HSC 105 linear - CNC control Heidenhain TNC 530 - Tool changer 30-fold (HSK A63) - NC rotary table 2606h Spindle Hours The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

bore capacity in steel (diameter): 50 mm throat: 400 mm bore stroke: 250 mm taper MK: 4 MK table-size: 705 x 580 mm feeds: 0,1 - 0,2 - 0,3 - 0,4 mm/U turning speeds: 60 - 1205 U/min total power requirement: 4,0 KW weight of the machine ca.: 0,85 t dimensions: 1,2 x 0,8 x 2,55 m Column drilling machine with: - Power feed - Left/right rotation - Coolant pump - Machine light The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

drilling machine, year 1990. Used machine. More info & price on IndustrialBuyer.

Boring power: 35.0 / 40.0 mm bore capacity in cast iron: 50.0 mm threading: M 30 bore stroke: 150 mm Size of table plate: 730 x 210 mm Center of spindle to wall or column: 280 mm Speed: 80.0 - 1.400 U/min distance spindle /table: 85 - 755 mm spindle taper MT: 4 MK column diameter: 120 mm feed: 0.1 / 0.2 / 0.3 mm/U voltage: 400 V Motor output: 1.3 / 2.3 KW weight of the machine ca.: 350 kg range L-W-H: 800 x 600 x 2020 mm Original price, including accessories: approx. 20.000 euros Special price available upon request Features: - Heavy-duty, versatile column drill press - Electric table height adjustment - Cross slide 730 x 210 mm ... with digital display - Machined base plate with T-slots - Automatic spindle feed - Fixed drilling depth stop - Stepless speed adjustment - Pole-changing motor - Thread-cutting device - Quick-release drill chuck with tapered shank - User manual (PDF) The  ...

Atlas-Copco GA11P FF 9,8 bar Diesel-oil (1) -- Naphte (2) -- Electr (3): electric Low press. (1) High press (2) Screw (3): 9,8 bar Volume flow rate: 1,82 m3/min Power imput: 11 kW Length: 1260 mm Width: 720 mm Height: 1480 mm Weight: 455 kg

We offer: 1 used oil drip pan Drip pan External dimensions: Length: approx. 2,600 mm Width: approx. 860 mm Height: without runners 140 mm with runners 250 mm 378,15 € net plus 19 % VAT ex stock 21698 Harsefeld. Shipping: Cheap shipping possible with inexpensive forwarding agent. Please inquire about the freight costs, stating your zip code and location as well as the desired item quantity. We offer a comprehensive range of new and used shelves and accessories and we are happy to support you in your planning. Subject to changes and errors.

Paper drilling machine Hang 114-30-4; good condition; cleaned and tested; 4 drill heads; Drilling lubrication; Drill cooling; Speed regulation; Table lifting speed adjustable; Drilling distance 36-260mm; insertion depth 6-130mm; Insertion height max.65mm; Endless Drilling Belt; Table size 600x480mm. Paper drilling machine 114-30-4; good condition; cleaned and checked; four heads; drill cooling; lubricating device; Variable Drill Speed; table lift speed adjustable; adjustable drill offset 36-260mm; insertion depth 6-130mm; max. stack height 65mm; cardboard band under drill; table size 600x480mm.

taper MK: 5 spindle diameter: 60 mm feed: ja m/min weight of the machine ca.: 1,1 t The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

x-travel: 2000 mm y-travel: 1500 mm z-axis: 3000 mm W-axis (spindle longitudinal): mm spindle diameter: 100 mm table surface area: 1.400 x 1.300 mm table load: t spindle turning speed range: U/min power capacity - milling spindle: kW tool taper: MK | dimensions: 6,4 x 3,2 x 3,4 m weight of the machine ca.: 11,0 t used table borer. - some tool holders - turntable with motor - coolant system - facing plate Ø 660 The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

x-travel: 1000 mm y-travel: 900 mm z-axis: 800 mm W-axis (spindle longitudinal): 500 mm spindle diameter: 90 mm table surface area: 1.000 x 1.000 mm table load: 2,5 t spindle turning speed range: 8- 1600 U/min power capacity - milling spindle: 11 kW tool taper: SK 40 | control: Heidenhain TNC 407 dimensions: 4,5 x 3,25 x 3,0 m weight of the machine ca.: 8 t used table borer. retrofitted to CNC Heidenhain TNC 407 - some tool holders - turntable with motor - coolant system The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Belt Conveyor, Webbing, Belt Conveyor Vanderlande 1900 mm Year of Make: 2020 Manufacturer: Vanderlande Model/ Type: Belt Condition: used Total length: approx. 1900 meters Total width incl. motor: approx. 1500 mm Belt width/conveyor width: approx. 1000 mm Material: Steel Colour: blue Frame height: approx. 300 mm Including SEW motor 1.1 KW Including side guide The conveyor technology ran until dismantling. Internal Article Number: 2026071902 Submission of an offer only with a valid imprint, sale only to commercial customers! Thanks to the excellent workmanship of the conveyor technology, your material glides smoothly to its destination, even under high loads. Tailor-made solutions for your intralogistics We are your competent partner for roller conveyors, belt conveyors, inclined conveyors or telescopes for loading and unloading your goods! We would be happy t ...

Belt Curve Conveyor, Curve Conveyor, Belt Curve 90 Degree Year of manufacture: 2023 Manufacturer: Vanderlande Model/ Type: Belt Condition: used Total length outside: approx. 2370 mm Total length inside: approx. 1170 mm Conveyor width: approx. 600 mm Belt type: Belt with fabric insert Including side guide: approx. 100mm Including SEW motor 0.75 KW Total weight: approx. 350 kg Colour: dark grey/light grey/black Including Frequency Inverter North The conveyor technology ran until dismantling. Submission of an offer only with a valid imprint, sale only to commercial customers. Internal Article Number: 2026071903 Thanks to the excellent workmanship of the conveyor technology, your material glides smoothly to its destination, even under high loads. Tailor-made solutions for your intralogistics We are your competent partner for roller conveyors, belt conveyors, inc ...

TECHNICAL DATA: Working dimensions: max. 1200 x 100 x 65 mm 05 Spindles with M10 right-hand thread 02 Spindle motors Complete with feeding device 03 Vertical Pressure Devices 03 Horizontal Pressure Devices Installed power: 6 kW

Manufacturer: TOS Model No.: H 80 Condition: Used Stock number: 9338 Worktop length: 1120 mm Worktop width: 900 mm Spindle diameter: 80 mm

Manufacturer: TOS Model: W 100 Condition: Used Stock number: 9339 Worktop length: 1250 mm Worktop width: 1250 mm X-axis moves: 1600 mm Y-axis moves: 1120 mm Z-axis moves: 1250 mm Spindle diameter: 100 mm

A complete central plastic granulate drying and conveying system Werner Koch, which was extensively expanded and modernized in 2021, is available. 1) Koch CKT 300 dry air dryer, year of manufacture: 2003, power: 41kW, air capacity: 300m³/h. 2) Koch CKT 500 dry air dryer, year of manufacture: 2021, power: 51kW, air capacity: 500m³/h, control system: Siemens S7. 3) 26x drying hoppers, volume: 11x40l, volume: 13x100l, volume: 2x150l. 4) 38x machine hoppers. 5) 2x Busch vacuum pumps. 6) Automatic Koch Navigator material distribution system, inputs: 26, outputs: 38. Including control cabinets and a central visualization and monitoring system Supervisione 9-7000. Documentation available. An on-site inspection is possible.

Alzmetall AC 32 Turret Double Head In-Line Drilling Machine Extremely robust and rare double-head in-line drilling machine based on two Alzmetall AC 32 drill tops. This system is a high-quality industrial design designed for highly efficient series or step machining. Instead of simple spindles, this machine is equipped with two separate tool turrets. This enables fully automatic machining cycles (e.g. centering, drilling, countersinking, threading) without the need to manually retool tools. Technical data & equipment (per capita / total system): Manufacturer of drill tops: Alzmetall (Germany) Model: AC 32 (electronically controlled with digital display) Drilling capacity: max. 32 mm in steel Threading capacity: max. M 24 / M 30 Tool changer: 2x swivelling turret heads with several stations Machine table: Solid, ground cast iron table with T-slots for flexible constru ...

Csepel RF50/1250 Radial Drilling Machine Robust and proven radial drilling machine of the quality manufacturer "Csepel" model RF50/1250. The machine is characterized by its solid construction and is ideal for locksmiths, workshops or demanding do-it-yourselfers. Technical data (according to nameplate): Manufacturer: Csepel (Budapest) Type: RF50/1250 Type of current: 3~ (three-phase current / 380 V) Frequency: 50 Hz Control voltage: 220 V Operating current: 10 A Required fuse: 16 A slow blow More items - new and used - can be found in our shop! International shipping costs on request!

A Hoes drainage trencher for laying drainage pipes and trenches for subsurface drainage is available. Engine: Deutz F 8 L 413 F, Power: 157kW, Torque (1500rpm): 760Nm, Fuel tank capacity: 435l, Oil tank capacity: 125l, Max. working/travel speed: 2400m/min/4750m/min, Track length: 4900mm, Track gauge: 2120mm, Track shoe width: 550mm, Specific ground pressure: approx. 0.26kp/cm², Max. trenching chain speed: 5.69m/s, Chain tensile strength: 640kN, Chain pitch: 100mm, Max. trench width: 290mm, Max. trench depth: 1850mm. Machine dimensions X/Y/Z: approx. 9650mm/2700mm/3400mm, Weight: approx. 13500kg, Operating hours: approx. 8470h. The machine is equipped with a laser guidance system. Includes many spare parts. Documentation available. An on-site inspection is possible.

4 Lenz CNC PCB drilling and routing machines are offered. 1) One CNC vertical PCB drilling and routing machine, Lenz LGX 460-2AL, year of manufacture: 1995, travel X/Y: approx. 550mm/460mm, rapid traverse X/Y: approx. 40m/min, max. drilling rate Z-axis: approx. 500strokes/min, spindles: Precise SC53H, spindle speed: approx. 20000rpm, tool holder: 3mm, tool capacity: 308, control: SIEB & MEYER CNC 44.00. Equipped with a cooling unit and a loader. Overall dimensions of the base machine X/Y/Z: approx. 1650mm/1700mm/2250mm, additional length of the loader unit: approx. 820mm. 2) One CNC vertical PCB drilling and routing machine, Lenz GX 460-2, year of manufacture: 1989, travel X/Y: approx. 550mm/460mm, number of spindles: 2, rapid traverse X/Y: approx. 15m/min, max. stack height Z-axis: approx. 10mm, tool holder: 3mm, tool capacity: 88, control: SIEB & MEYER CNC 45.00, equipped with a coolin ...

For sale is an 800 to step press. Technical data see photos. Press we sell from location.

Drills for turned elements TRIADE FR3 S Number of drilling units 3 1. 3kw pit 2. Top 1.5kw 3. Lower 1.1kw (possibility of screwing in joints/screws) Pneumatic Material Clamp Application drilling of legs, turned elements, curtain rod elements Weight 1200kg Dimensions 115x128x180cmH

Key data: 40 mm, 80 1/min

Column Drill Alzmetall AB 3 / ESV Drive type: AZ continuously variable transmission with two-stage manual transmission Speed range (Gear Stage I): 80-240 rpm or 160-480 rpm Speed range (Gear Stage II): 240–700 rpm or 480–1,400 rpm Automatic feed: 3 stages (0.1 – 0.2 – 0.3 mm/rev) Motor power 1.5 KW - 380 Volt Tool holder: Short spindle MK 3 Spindle stroke (drilling stroke): 160 mm Projection: 285 mm Table clamping surface: 500 x 370 mm Column diameter: 130 mm Machine weight approx. 400 kg Drilling capacity in steel (St 60): 28 mm Drilling capacity in cast iron (GG 20): 35 mm Drilling capacity in steel (St 60): 40 mm Tapping in steel (St 60): Up to max. M 22 Threading in cast iron (GG 20): Up to max. M 33 Retrofitted foot switch and control cabinet Mechanical-hydraulic machine vice Röhm RB 4 (Jaw width 160 mm - clamping range up to 310 mm) Retrofitted f ...

Stainless steel nucha filter dryer from the E.BACHILLER brand of 0.4 m2. Year 1987. Hydraulic power plant with 7.5 hp 1410 rpm 50 hz 220 v motor Technical characteristics Year of manufacture 1987 Working body pressure 3 bar Body working temperature 300 ºC Total body volume 680 L Working pressure half-round/liner 3 bar Working temperature of half round/jacket 300 ºC Half-round volume/shirt 28 L Filtration area 0.4 m2 Equipment Setup Hydraulic power plant Transportation Information Length 2100 mm Width 2100 mm Height 2100 mm Weight 500 Kg No documentation In your state