dr hochstrate used for sale

sheet width: 0500 mm coil outside dia.: 1400 mm weight max. in kg: 4000 kg plate thickness: 0,80 - 3,60 mm diam. of the rolls ca.: 80 mm feed rolls: 2 nomb. of straightening rolls: 7 exit pinch rolls: 2 speed: 5-30 m/min range of expansion ca.: 445 - 530 mm expansion: manuell total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m Control conversion to SIEMENS S7 in 2012 - pneumatic pressure roller on the side - pneumatically ventilated feed roller - Straightening rollers manually adjustable - lateral belt guide at the inlet - Large roller basket at the outlet - Ultrasonic transmitter for loop control - Roller feed type 1125 D - Bandwidth max. 510 mm - Band thickness max. 6 mm with full width 5.50 mm - Roll diameter 125mm - Feed speed: max. 100 m/min. - pneumatically ventilated top roller - Lateral tape guide with digital display - Inlet roller basket  ...

x-travel: 8000 mm y-travel: 920 mm z-travel: 1000 mm Control: total power requirement: kW weight of the machine ca.: 30 t dimensions of the machine ca.: m Year of construction approx. 1970 X 8000mm Y 920mm Z 1000 mm Head rotates 180° Table Length 3600mm Width 920mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Rotary actuator, hydraulic motor HKS rotary actuators Type: DA-H 125 - 180 Rotation angle 180 Operating pressure max. 210 bar Nominal torque max. approx. 5000 Nm Shaft diameter 70 mm Shaft pin length 140 mm Keyway width in the shaft 20 mm Flange diameter 222 mm Centering diameter 150 mm bolt circle 195 mm Connection thread 1/2 flange with 8 mounting holes 18 mm - 2 pieces screw-in fittings from 1/2 to 16S Overall length housing without drive shaft, without centering edge 384 mm Overall length housing with drive shaft 535 mm Weight 70 kg very good condition - New, unused from stock dissolution; used

x-travel: 2400 mm y-travel: 2000 mm z-travel: 1450 mm table surface area: 5000 x 1400 mm spindle taper: SK 50 Control: Fidia C1 throat: 1500 mm with digital readout ball screw extensive toolings and accessories! The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Manufacturer: Lohenner Druckluftkessel, Year: 1990, Compressed air boiler litres: 1000, Wight approx. kg: 400, Year :1990

Manufacturer: Heesemann Druckbalken war noch eigebaut, Type: MFA 6 oder MFA 8 , FREETEXT1: Hubmagnet 6 mm, FREETEXT2: 24 Volt, FREETEXT3: Länge 1470 mm, FREETEXT4: Bauhöhe 200 mm,

Maximum Diameter: 500 mm // Minimum Diameter: 300 mm

Maximum Diameter: 200 mm // Minimum Diameter: 100 mm

material width: 200 mm material thickness: 3 mm feed length: 999999 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Wire electrode, welding wire, copper base MIG solid wire electrode for soldering copper, copper-silicon, copper-zinc alloys -Net weight: 10.9 kg -Number: 1x package available -Price: per package -Weight complete: 11.5 kg/package

Wire electrode, aluminum welding wire, aluminum welding wire, aluminum-magnesium alloy welding rod -Net weight: 7 kg -Number: 2x package available -Price: per package -Weight complete: 7.6 kg/package

Forklift battery charger, industrial charger, forklift battery charger, industrial charger -24 volts -Power: 20A - Connection: 230 volts -Number: 7 x chargers available -Price per piece -Weight: 18kg/pcs -function tested

Grindstone, grinding pencil -for internal grinding machine -1 collet holder -Taper cone: Ø 53 mm -Mounted points: different diameters -Outer diameter: 1-40 mm -Sale: only complete -Weight: 6 kg

Compressed air breathing apparatus -electric pump with emergency crank -Distributor: with pressure gauge -Tube -Box -Transfer: in the current condition as seen -Weight: 100kg

Compressed air breathing apparatus -Transfer: in the current condition as seen -electric pump with emergency crank -Distributor: with pressure gauge -Tube -Box -Weight: 100 kg

Gear motor, electric motor, electric gear motor -Manufacturer: Watt Drive, gear motor type HG OKG 71N4 -Speed: 246 rpm -Power: 0.37kw -Torque: 14.4 Nm -Shaft: Ø 20 x 40 mm -Protection class: IP55 -Dimensions: 400/170/H210 mm -Weight: 15kg

live center, live center, live morse taper, live center, live lathe center, live center, slip-on center, heavy duty live center -Manufacturer: Roterberg Drehmeister, revolving center point slip-on point -Type: 80 TGL 30-2325 -Recording: see photos -Center point: Ø 50 - 148 mm -Total dimensions: Ø 149 x 220 mm -Weight: 9.8kg

Electronics cables, extension cables, electronics cables -Manufacturer: Draka Comteq, data cable -Type: UC2000 B_A 4G50/125 FRNC -Length: 130 m -Price: complete -Dimensions roll: Ø 500/330 mm -Weight: 20 kg

wire electrode, welding wire, welding wire -Manufacturer: Dratec , MAG wire electrode -Type: DT-1.4370 AWS ER 307Si O 1.0 mm -Price: per roll -Quantity: 4 rolls -Dimension: O 310 /110 mm -Weight roll: 15 kg

wire electrode, welding wire, welding wire -Manufacturer: Dratec, started roll of MAG wire electrode -Type: DT-2.4806 NiCr20Mn3Nb O 1.0 mm -Price: roll complete -Dimension: O 300/100 mm -Weight reel: 5.4 kg

Compressed air breathing apparatus, respiratory protection -2 bottle device -Overpressure with: pressure reducer -High pressure manometer -Demand valve with: integrated warning device -Thread connection: M 45 x 3

Weld beveller, weld bevel former, weld seam preparation, weld bevel forming machine, edge milling machine, edge milling machine, mobile milling machine -Edge milling: 0 - 3 mm -Drive: 0.45 kW -Angle: adjustable -Dimensions: 485/345/H250 mm -Weight: 18.2 kg

Double coiler, coiler, decoiler, for sheet metal processing, punch, eccentric press, hydraulic press, punching machine -Handover in the current condition as seen -Drive: without -Max. Recording: Ø 590 mm -min Recording: Ø 250 mm - Recording width: 300 mm -Dimensions: 1460/1000/H1400 mm -Weight: 332 kg

High-frequency ignition device, heating, gas and oil burners -Type: E4718/54 -Dimensions: 85/70/H40 mm -Price: per piece -Number: 12x available -Weight: 0.3 kg/piece

Pressure intensifiers, pressure medium converters, flow control valves -Operating pressure ranges -Hydraulic part (power part): 2 - 32 bar -Pneumatic part (control part): 3 - 10 bar -Volume flow: max. 16 l / min. at (6 bar inlet pressure, load-dependent) -min.: 2 cc/min. (Hydraulic oil with a viscosity of 21 mm³/s [3°E] at 50 °C) -Screw connections hydraulic side: G3/8 pneumatic side: G1/8 -Dimensions: 140/70/H68 mm -Weight: 1.1 kg

Pneumatic cylinders, air cylinders, pneumatic rams, air rams -Transfer: in the current condition as seen -Vacuum suction cup: with damage -Version: with vacuum suction cup, equipped with directional valve and induction knife for the stroke -Stroke: 70 mm -Sucker: Ø 125 mm -Piston rod: 20 mm -Total length: 420 mm -Total length extended: 490 mm -Number: 31 pieces available -Price per piece -Dimensions: 420/140/120 mm -Weight: 4 kg/piece

Remote cable connector 15 m P7000 -P3U remote adapter -Part-No.: 8317998 -Number: 1x remote cable available -Price: per piece -Weight: 2 kg/piece

Remote sensor -Manufacturer: Drager -Type: P3U Remote Sensor -Part-No.: 8317275 -Number: 1x P3U remote sensor -Price: per piece -Weight: 1 kg/piece

Lathe broaching machine -slotting machine , keyseating machine, slot broaching machine Rotary table, rotary indexing table, dividing head, dividing head Grooves: straight, ring, oval, spiral video available - Chuck diameter: O315 mm - Inner bore: O 98 mm - max. stroke: 250 mm - Rotating three-jaw chuck: grooving in bores (bushes) - standing three-jaw chuck: for grooves in bores (without freewheel) - slot broaching tool, - Dimensions: 1820/830 / H1310 mm - Weight: 1330 kg

Powder turbo mixer (1x), Make Drais, Type T-2000 FM1, Year of construction: 1989, Material Mild steel, Working pressure jacket 3 Bar, T-arms , Capacity 2000 Ltr, Trough sizes dia. 1200x1950mm, Top connections dia. 300mm + dia. 100mm + dia. 25mm, Inspection hatch 600x450mm + 300x200mm, Outlet dia. 200mm, With jacket (105 Ltr), Max. temperature 143 Degr. C., With adjustable

material width: 200 mm coil weight: 1,5 t material thickness: 0,8 - 4,2 mm straightening roll diameter: 80 mm Number of straightening rolls: 7 Pcs. Coil turner 2370 B Load capacity 1.5 ton. Bandwidth 300 mm Coil inner diameter: 400 - 500 mm Arm length per arm: 670 mm Dimensions: depth 1,230 mm, housing height 1,100 mm, width 1,700 mm Weight: 760 kg. Straightener Dreher 1676 AV-RA2 Material width: 200 mm Material thickness: 08 - 4.2 mm Number of straightening rollers: 7 Number of pull rollers: 4 Straightening rollers diameter: 80 mm Would be down by a running press Documents circuit diagrams, operating instructions etc. available The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Manufacturer: Ing.Drüge, Hamburg 6 shaft shredder, YOC 2011, 15,0+22,0 Kw., 400 V., with control cabinet incl. reversing circuit Cutting opening: 600x800 mm, incl. hopper and steel construction Ideal for: files, PC hard drives, CDs, hollow bodies up to 3 ltr.

Flame cutting system, torch, oxyfuel cutting system, cutting torch, welding torch, hand cutting torch, welding set -Manufacturer: Dräger, burner set set in a metal box -Burner size: 0.2 to 30 mm -Accessories: see pictures / parts list -Dimensions of the case: 470/220/H95 mm -Weight: 9 kg

material width: 200 mm material thickness: 0,6 - 3,0 mm no. of straightening rolls: 7 number of draw-in rolls: 2 straightening roll diameter: 60 mm total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Luftbefeuchtung - Humidification DRAABE AC 2040 Aqua-Offset Year 1995 - Serial-No. 20 Online-Video-Inspection by Skype-Video We would be very pleased with your visit - more machines on Stock Available Immediately - Can be inspect On Stock Emskirchen / Nuernberg - Can be test

DRAIS bead mill PM25 in sealed design by means of gland packing, vertical design. Grinding media separation by means of friction gap, adjustment on request, grinding vessel made of thick-walled special steel, coolable, stirring discs Vaudit hardened. Main drive 24 kw, pump motor 0.75 kw, protection class EEX e II T3

DREHER HEAVY DUTY GRANULATOR, (photos taken before reconditioning), One machine from heavy scraps to regrind, S 60-65 SRV GF, Infeed 650 x 600 mm., solid rotor 650 mm wide 600 mm Ø, n.8 rotating knives, n.3 still knives, throughout rate 500-1.500 kg/h depending on screen, 75 kw drive, NEW electric panel, screen : bespoke to project, Machine totally reconditioned, See how we recondition [HERE](https://www.germanplast.eu/pages/photo-gallery), possible addition of blower, pipes, etc., Total dimensions: LxWxH 1,36 x 2,8 (3,3 open) x 3.64, This is a hevy duty granulator especiallly constructed, for the efficient granulation of thick walled plastic parts such as, lumps, chunks, plates, pipes. One machine does the job with great saving!, It can handle very heavy parts without need of pre-shredding, installed power : 75, HIGHLIGHTS: HEAVY DUTY MACHINE

Brand: Drent Model:Gazelle 4 imr excel The year of production:1989 Brand Drent | Model Gazelle 4 imr excel Machine is available immediately. Please contact us for further information or an inspection.

General SKU020Y107 LocationBarneveld MakeDrais Mannheim TypeTurbuMix TM-400E FM1 No.56009 Year of construction1999 Main Features MaterialStainless steel Volume400 Ltr. Motor11 KW Specified Features - Powder turbo mixer Powder turbo mixer(1x) T-armscheck Capacity400 Ltr Useful capacity120-300 Ltr Trough sizesdia. 700x1050mm Top connectionsdia. 300mm + dia. 80mm + dia. 65mm Inspection hatchdia. 700mm Outletdia. 125mm Motor8,2/11,0 KW, 400 Volt With lump breakercheck Motor7,5 KW, 400/690 Volt Speed lumpbreaker1450 Rpm MaterialStainless steel 1.4541 (321), Stainless steel 1.4571 (316Ti) Information With switchgearcheck Floorspace3,0x2,1 M Total height1,9 MPowder turbo mixersDraisMixers > Powder turbo mixersBrand > Drais What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination ...

General SKU084Z415 LocationBarneveld MakeDraiswerke Mannheim TypeFH-3 Year of constructionunknown Material Pan materialStainless steel Pressure Working pressure0 Bar Vacuum possiblecheck Working pressure jacket3 Bar Main Features MaterialStainless steel Volume165 Ltr. Specified Features - Planetary mixer Planetary mixer(1x) 2 Mixing/kneading shaftscheck With scrapercheck Motorcheck With covercheck With pan(2x), Pans mounted on wheels Capacity165 Ltr, Pans without bottom outlet With jacket(38 Ltr) With hydraulic liftingcheck MaterialStainless steel Information With switchcheck Floor space1,8x1,0 M Total height1,9 M Weight2000 KG Technical specs Extra informationjacket max temp is 143 Degr. C. Planetary mixersDraisMixers > Planetary mixersBrand > Drais What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new - ...

General SKU024W116 LocationBarneveld MakeDrais TypeTC-1600 FM I No.54940 Year of construction1994 Pressure Working pressure1 Bar Working pressure jacket6 Bar Main Features MaterialStainless steel Volume1600 Ltr. Motor50 KW Specified Features - Powder turbo mixer MaterialStainless steel 1.4571 (316Ti) Powder turbo mixer(1x) T-armscheck Capacity1600 Ltr Trough sizesdia. 1000x2000mm Inlet2x 500x500mm Outlet± dia. 150mm With jacket(120 Ltr) Max. temperature164 Degr. C. With adjustable packing glandscheck Motor50/50/50 KW, 400 Volt Speed mixing shaft30/60/90 Rpm With lump breaker(3x) Motor17,5/23,0 KW, 400 Volt Speed lumpbreaker1500/3000 Rpm Information With switchgearcheck Floorspace4,1x2,5 M Weight10.000 KGPowder turbo mixersDraisMixers > Powder turbo mixersBrand > Drais What you can expect from Foeth: -- Machine is in working condition -- At a reduced pri ...

General SKU422U1331 LocationBarneveld MakeDrais Mannheim TypeTM 1000 E No.56216 Year of construction2001 Main Features MaterialStainless steel Volume1000 Ltr. Motor30 KW Specified Features - Powder turbo mixer Powder turbo mixercheck Capacity1000 Ltr. Trough sizesDia. 940x1500 mm InletDia. 250 mm Inspection hatch450x450 mm OutletDia. 300 mm Max. temperature50°C With adjustable packing glandscheck Motor30kW, 400/690Volt, 1480rpm. With frequency controllercheck Speed mixing shaft20-120 rpm. MaterialStainless steel 1.4571 (316Ti) Information With switchgearcheck (as is) Sizes switchgear1,2x0,5x2,3 m Total height2,7m Weight6100 kg Floorspace4,3x1,85 mMinerals & inorganicNew arrivalsOther feedPowder turbo mixersPowdered foodsFeed additivesDraisIndustries > Chemical > Minerals & inorganicNew arrivalsIndustries > Food & Feed > Other feedMixers > Powder turbo mixer ...

General SKU299U731 LocationBarneveld MakeDrais TypePM-DCP 3-45 No.54238 Year of construction1991 Pressure Working pressure3 Bar Main Features MaterialChromed steel Volume12 Ltr. Motor45 KW Specified Features - Sand mill MaterialChromed steel, Stainless steel 1.4462 (318LN), Tungsten Vertical sandmillcheck Capacity12 Ltr. Housing dimensions dia. 365x400 mm Inlet25 mm Outlet19 mm With mechanical sealcheck With jacketcheck (9+5 Ltr.) Max. temperature98 °C Motor45 kW, 380/220 Volt With variable speed drivecheck Information With switchcheck Weight2000 kg Floorspace1,5x1,05 m Total height2,1 mSand millsDraisMills > Sand millsBrand > Drais What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barneveld, The Netherlands. ...

General SKU379T1136 LocationBarneveld MakeDrais TypePML-V+H No.54 310 Year of construction1992 Pressure Working pressure3 Bar Main Features MaterialStainless steel Volume1.2 Ltr. Motor3.3 KW Specified Features - Sand mill MaterialCeramic, Stainless steel 1.4571 (316Ti) Capacity1,2 Ltr. Inlet9,5 Outlet9,5 With jacketcheck Motor3,3 kW Rotor speed2900 rpm With pumpStober RD11G-1005-012-4 Motor0,12 kW 220/380 (Ex) With variable speed drivecheck Information With switchcheck With switchgearcheck Weight340 kg Floorspace1,2x0,9 m Total height0,7 m ATEX compatiblecheck Extra Specificationsthe machine comes with many additional partsSand millsDraisMills > Sand millsBrand > Drais What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the  ...

General SKU294T684 LocationBarneveld MakeDraiswerke TypePMH-25-TEX No.53860 Year of construction1990 Pressure Working pressure1 Bar Working pressure jacket3 Bar Main Features MaterialStainless steel Volume31 Ltr. Motor22 KW Specified Features - Sand mill MaterialStainless steel Attritorcheck Capacity25 Ltr. Housing dimensions dia. 235x700 mm InletDN25 OutletDN25 With mechanical sealcheck With jacket10 Ltr. Max. temperature98 °C Motor22 kW 400/690 Volt Without ballscheck Information Total height1,8 m Weight1400 kg Floorspace1,7x1 mSand millsDraisMills > Sand millsBrand > Drais What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barneveld, The Netherlands. Please visit us in Barneveld for many more machines!

General SKU294T680 LocationBarneveld MakeDraiss TypePM SUPERTEX 30 No.56367 Year of construction2001 Pressure Working pressure3 Bar Working pressure jacket3 Bar Main Features MaterialStainless steel Volume31 Ltr. Motor22 KW Specified Features - Sand mill MaterialStainless steel Horizontal sand millcheck Capacity31 Ltr. Housing dimensions dia. 240x640 mm Inletdia. 24 mm Outletdia. 24 mm With mechanical sealcheck With jacket7 Ltr. Max. temperature70 °C Motor22 kW 400 Volt With variable speed drivecheck Information Mounted on framecheck With switchas is Weight1250 kg Floorspace1,6x0,9 m Total height2 mSand millsDraisMills > Sand millsBrand > Drais What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barneveld, Th ...

General SKU240U266 LocationBarneveld MakeDrais TypeFH 30 No.47171 Year of construction1975 Pressure Working pressure2 Bar Vacuum possiblecheck Working pressure jacket6 Bar Main Features MaterialStainless steel Volume30 Ltr. Motor5.5 KW Specified Features - Planetary mixer Planetary mixercheck Motor5,5 kW 380 Volt With covercheck With pancheck Capacity30 Ltr. Pan sizesdia. 384x347 mm With jacket7,5 Ltr. With hydraulic liftingcheck MaterialStainless steel 1.4541 (321) Information Total height2 m With switchcheck Floor space0,6x1,5 mPlanetary mixersDraisMixers > Planetary mixersBrand > Drais What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barneveld, The Netherlands. Please visit us in Barneveld for many more mac ...

General SKU072Y445 LocationBarneveld MakeDrais TypeT-630 No.45988 Year of construction1973 Main Features MaterialMild steel Volume630 Ltr. Motor24 KW Specified Features - Powder turbo mixer MaterialMild steel Powder turbo mixer(1x) T-armscheck Capacity630 Ltr Trough sizesdia. 900x1000mm Top connectionsdia. 195mm + 2x dia. 70mm Inspection hatch400x600mm (top side) Outletdia. 200mm With adjustable packing glandscheck Motor16,0/24,0 KW, 380 Volt (Ex) Speed mixing shaft62,5/125 Rpm Information Floorspace3,1x1,7 M Total height2,0 M Weight2100 KG ATEX compatiblecheck Extra Specifications-- RECONDITIONED -- ReconditionedPowder turbo mixersDraisReconditionedMixers > Powder turbo mixersBrand > Drais What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welc ...

General SKU035E113 LocationBarneveld MakeDraiswerke GmbH Mannheim TypePMC-25 TEX No.55036 / 5078 Year of construction1994 Pressure Working pressure3 Bar Main Features MaterialRubber Lined Volume25 Ltr. Motor30 KW Specified Features - Sand mill Horizontal sand mill(1x) Capacity33,7 Ltr Housing dimensions dia. 230x700mm, Housing without jacket With mechanical sealcheck With jacketcheck Max. temperature70°C Motor30,0 kW, 400/690 Volt With variable speed drive(frequency inverter) With pumpmake Bredel, type SPX-25 Motor0,55 KW, 230/400 Volt MaterialRubber, Stainless steel 1.4571 (316Ti) Information With switchgearcheck Floorspace2,3x1,1 M Total height1,9 M Weight1550 KG Extra SpecificationsHousing is rubber lined Technical specs Extra informationHousing without jacketSand millsDraisMills > Sand millsBrand > Drais What you can expect from Foeth: -- Machine is  ...

General SKU020Y108 LocationBarneveld MakeDrais Mannheim TypeTurbuMix TM-630E FM1 No.56082 Year of construction2000 Main Features MaterialStainless steel Volume630 Ltr. Motor18 KW Specified Features - Powder turbo mixer MaterialStainless steel 1.4541 (321), Stainless steel 1.4571 (316Ti) Powder turbo mixer(1x) T-armscheck Capacity630 Ltr Useful capacity189-470 Ltr Trough sizesdia. 800x1300mm Top connectionsdia. 250mm + dia. 150mm + dia. 100mm Inspection hatchdia. 800mm Outletdia. 160mm + dia. 75mm Motor12,0/18,0 KW, 400 Volt Speed mixing shaft± 63/126 Rpm With lump breaker(2x) Motor7,5 KW, 380-420/660-690 Volt Speed lumpbreaker1450 Rpm Information With switchgearcheck Floorspace3,4x2,2 M Total height1,8 M Weight3700 KGPowder turbo mixersDraisMixers > Powder turbo mixersBrand > Drais What you can expect from Foeth: -- Machine is in working condition -- At a  ...