129,243 used machines on RESALE, but how to find them? Machine Search
Key data: 50
Extruder 2 spindles: 50 mm Ø 12 L/D, motor: 4.5 kw, without electrical panel.
Key data: 50
Extruder 2 corrotating spindles: 50 mm Ø, 40 L/D, brand: ICMA SAN Giorgio, with double degasser. Motor: 57.5 Kw direct current with drive. Material dispenser and thread head (spaghetti), with electrical panel.
Extruder 2 spindles 18L/D, model: BK-50-93, tapered spindles, brand: Volcano, with motor: 25hp, with variable speed drive. Degasser and dispenser of material and electrical panel.
Key data: 65
Extruder 2 corrotating spindles: 65 mm Ø, 30L/D, brand: Maris, model: TM-65 V. Shirt and spindle compatible by segments. Degasser, motor: 90 KW DC, with variable speed. Thread head and 2 spare spindles.
Stock No. 2680 1x partially overhauled and functionally tested Compounding extruder double screw, co-rotating intermeshing Segmented screws and cylinder barrel (water cooled) Screws 2x 64 mm - 40 L/D Screw speed up to 1200 rpm-1 Drive 482 kW-DC Gearbox Flender safety coupling atutomatik 3x degassing venting ports ( vacuum pump optional for extra charge ) 2x side feeding dosing extruder type ZSFE 50 twin screws with dm 48.5 mm with 4 kW each, speed up to 800 rpm.-1 Control cabinet with Siemens HMI Touch OPTIONAL at extra cost: 1) Screen-pack-changer changer 2) Vacuum pump 3) Pelletizing: ST strand, - WRG waterring or - UWP underwater pelletizing system 4) Granulate classifying sieve 5) gravimetric loss-in-weight blender / dosing system 6) Material conveying 7) Big-bag filling station 8) Start-up by our technicians Visit to our factory in Wuppertal. ...
Compounding - granulation line, consisting of: Extruder twin screw synchronization, drive 31 kW Segment screws and barrels, water-cooled Screws 2x Ø 35 mm – 44 L/D 1x degassing zone (atmospheric) 1x degassing zone (vacuum) 1x side dosage Screen changer double piston type K-SWE 101 with hydraulics Switchboard Water bath, granulator, etc. optionally also available on request.
Key data: 40 mm, 40 , 600 U/min
Material: PE, PP, PS, ABS, Year of construction: 2000 Capacity: approx. 100 – 300 kg/h Screw diameter: 2 x Ø 40.0 mm L/D: 40:1 Propulsion: 110 kW (DC) more details: synchronous, degassing with vacuum pump, screws and cylinders segmented, Strand nozzle, water bath, strand granulator. NEW control cabinet for heating and motor control (Siemens S7, touch screen) Optional: Side loading
Key data: 17 mm, 40 , 1200 U/min
Kategorie / Category: Twin-screw extruder / Twin-screw extruder Nummer / Number: DE27684 Manufacturer / Manufacturer: Leistritz Typ / Type: ZSE 18 HPe Baujahr / Year: 2009 Capacity: approx. 40 - 60 kg/h Motor: 9.4 kW AC max. screw speed: 1,200 rpm Screw diameter: 2 x Ø 18.8 mm L/D: 40:1 Material: PE, PP, PS, ABS + fillers // more details: synchronous, atmospheric degassing, segmented screws and barrels // Control: MacromateXX Siemens with visualization //
DC motor Stromag 70 kW, gearbox 2 x 960 Nm, with Coperion ZSB 70 side feed. The worm shafts and the end head are missing. Therefore, sales as spare parts carriers.
Key data: 63 mm, 1300
Twin screw extruder, conical Manufacturer: Reifenhäuser Type: BT 1000-2-63 K Year of construction: 1994 Serial No.: 32061 Working hours: 32,303 h Screw geometry: conical for PVC-hard profiles Screw diameter: 63 – 121 mm Screw length: 1300 mm Screw speed: max. approx. 32 1/min. Nominal torque of the gearbox: 1000 daNm Dynamic load rating of the return pressure bearing: 103600 daN Engine power: 43.0 kW, Drive motor: Baumüller DC motor Cylinder heating/cooling zones: 4/3 (air cooling with fan) Adapter heating zones: 1 Tool Heating Zones: 5 Temperature control: digital temperature controller (2 x PSG Multipact 88) Max. permissible mass pressure: 500 bar Output capacity: approx. 150 - 200 kg/h for PVC-rigid profiles Accessories: Dosing device and material hopper Extrusion height: 1150 mm Dimensions: 4250 x 1200 x 1750 mm without hopper (LxWxH) Weight: approx. 3000 k ...
Twin-screw extruder, corrotating, brand: OMC, type: EBV 31/32D, year: 2001. 31 mm Ø composable spindles. Book-type shirt. 11 Kw motor with water-cooled variator and wire head. Total installed power: 25 kw
Key data: 2 mm, 17
Twin screw extruder, parallel Manufacturer: Hans Weber Maschinenfabrik GmbH Type: DS 85 Year of manufacture: 1979/2022 Machine No.: 85-399 Screw geometry: for PVC-hard profiles Screw diameter: 2 x 85 mm Screw length: 17 x D Screw speed: max. approx. 30 1/min. Worm torque: 10,000 Nm Motor power: 3.3 - 25.0 kW, Drive motor: Commutator motor Elektra Faurndau Cylinder heating/cooling zones: 4/2 (air cooling with fan) Tool Heating Zones: 8 Temperature control: 12 x digital temperature controller KS 40 (PMA) Accessories: Melt pressure sensor and melt temperature sensor Connected load: approx. 60 kW (without tools) Extrusion height: 1100 mm Output capacity: approx. 150 - 180 kg/h for PVC-hard profiles Accessories: Material funnel and connection flange Accessories: Vacuum pump (1.1 kW) incl. material separator Dimensions: 4500 x 1200 x 2100 mm (LxWxH), incl. material hoppe ...
Brand Cincinnati Milacron Austria GmbH Type CMT 35 Machine number 2005723/10 Type Screw Conical Double Screw Year of manufacturing 1993 Ble Ud Dvyovl Hzgocop Machine hours 104.599 hours Screw Diameter 35 mm Dimensions (LxWxH) 3200 x 1500 x 1720 mm Weight (approx) 2000 kG
Deze extruder van Cincinnati staat bij Plastima Used Machinery in de machineopslag. De machine komt uit 1999. Speciale opmerking: de extruder mist de versnellingsbak. Bj Usq Tr T Rod Dvycjlp – Merk: Cincinnati – Model: Titan 45R-APC – Bouwjaar: 1998 – Conische dubbele schroef extruder – Schroef Ø: 45 mm – Werkuren: 64.082
Merk: Leistritz AG Model: Micro 27/40 D Type schroef: Dubbele schroef Bouwjaar: 1993 Schroef Ø: 27 mm L/D-verhouding: 40 Werkuren: 2.466 Bws Ud Dvyju Aqdkocjw
• One pair of original WEBER screws (excellent state, including measurement report • One pair of non-original screws Be Udowaxuae Dvycsww • Gearbox inspected and partially revised by WEBER • Control upgraded to WPS-control • Output on PVC around 700 kg/hour
Key data: 72 mm
We can offer a W&P extruder. 75/36, year 2004, stopped, working condition.
Key data: 58 mm
We can offer a Toshiba extruder. 58/40, year 2010, stopped, working condition.
MD-0105 Twin Screw Extruder - Brand: MAPRE - Type: E.2.6.100.22 - Diameter: 100 - Uses 22 L/D - With dispenser - 74 KW motor - Variable speed drive - Electrical panel - With hopper with forced feeder
We can offer Krauss maffei extruder,moder ZE90A, manufactured in 2013, main motor power 884kw, large output, installed and used, auxiliary equipments available, serious buyer contact us.
We can offer Krauss maffei extruder,moder ZE90A, manufactured in 2013, main motor power 884kw, large output, installed and used, auxiliary equipments available, serious buyer contact us.
Reduction and transfer case for conical twin screw extruder Cincinnati Titan 58 Manufacturer: Eisenbeiss on behalf of Cincinnati Extrusiontechnik General overhaul included: • Checking the sprockets for damage with a special camera • New sealing of the drive and output shaft • New shaft bearing • New oil filling • Repainting Condition: overhauled, fully functional
Key data: 72 mm, 28 , 50 U/min
Parallel twin screw extruder Cincinnati ARGOS 72R-28D Output capacity: max. 400 kg/h (depending on material and processing conditions) Power main drive: 47 kW (AC motor) Screw diameter: 72 mm, L/D = 28 Screw speed: max. 50 rpm Screw geometry for u-PVC pipe or technical profiles Original screws and barrels in very good condition 12 x Tool heating zones 3-ph/5-pin CEE 32A/10.5 kW 1 x adapter heating zone 1-ph/5-pin CEE 32A/5.5 kW 13 x TC Type J 16 mm Tuchel C70B 3-pin 4 m Incl. mass pressure and temperature sensor Successor interface: Interface 1 (analogue) and Can Open Bus 3 x Add on Plasticolor 0–10V Machine control Cincinnati EXc ProXP Horizontal conveyor incl. material hopper Total connected load: 184 kW Dimensions (L x W x H): 4,018 x 1,250 x 2,463 mm Weight: 4,700 kg Condition: used, overhauled & functionally tested
Double-sided grinding and polishing bench MEYER type SMPMasch. No. 848 Year of construction 1963Shaft diameter 50 mmGrinding wheel holder 305 mmDisc spacing 1470 mmGrinding-polishing wheel diameter max. 800 mmWorking height 550 mmSpeed 710 / 800 / 950 rpm. Drive power 2x 3 kWNet connection 380 volts, 50 Hz.- two drive motors for each working side separately- star-delta switch for each drive motor separately- speed change by folding the drive belt- dust extraction flange 100 mm-
IBARMIA double drilling machine model BP-50. Year of manufacture 2005. Serial number 043285. Equipped with two drilling heads for simultaneous operations. Pneumatic workpiece clamping system. Integrated cooling system (coolant). Motor power 4.2 kW. Working speeds 750 / 1500 rpm. Electrical connection 380 V / 50 Hz. Acoustic level 78 dB(A). Machine with CE marking. Ideal configuration for series production and repetitive operations. Robust industrial construction on common base. The dimensions are approximate. Auction-ID: A7-44864-2
Quantum Qsm 175 Double Grinder Grinding Machine Double Grinding Machine Auction-ID: A7-45427-243
We offer all types of screw manufacturing machines M3 - M25 -A href=inchabc://abc.steinfels-kg.de/sale/screws/inch>all information about the machine please click here
We can offer you all types of screw making machinery for M3 - M25
M18L - 1 Screw Head Slitting Machine (used) without vibrating conveyor Make: MENN - Type: KS8 and KS5 Diameter range 1.7-10 mm Shank length under head 3-105 mm Power Piece/Min 27-1.850 Weight 800 kg Engine power 1.5 kW
Reifenhäuser Schnecke D = 120 mm - 30 l/d, used for extruder type RH or RT 1651-1-120-30 also available: Set 120 mm - 25 L/D consisting of cylinder and new screw available for Reifenhäuser Extruder Model RT/RH 1651-1-120-25
Cat. No. 07-1268 in very good condition Type SEP 100.1 Design: H1 PO1 Dimensions: Length: 143 cm Width: 56 cm Height: 143 cm Capacity: 60 litres/min., 3600 l/h Pressure: 6 bar Engine power: 4 kW DN 65 For inquiries: Tel: 09353 90905-0 or Fax: 09353 90905-22 Mobile: 0171 651 82 48 On request, we will be happy to send you our complete catalogue. Sightseeing is also possible in the evening and on weekends by appointment. All prices are ex works plus law VAT Intermediate sale reserved! Freight cost share: by scope of delivery
new and origin packed set of screw and barrel for Reifenhauser extruder, model RT5801-1-150-30, screw diameter 150 mm - 30 l/d
Type: SNZP 380.1 HX1P11 Year of construction: 1998 No. 7610158 Q = 30/167 l / min N = 60/220 l / min Drive North in EEx II Capacity: 3.3 kW, 400V Drive North N1-n2 = 33-258 min-1 Type: SK 33-R1960-112 M / 4 ED Dimensions: LWH = 2300x420x500mm Weight: 250 kg
Type: NL 20 A Com.: 70 50 17 02 MaschNr.: 271872 Year of construction: 1996 unused Engine water cooled (0.75 kW) speed controlled transmission Pharmaausfuehrung Dimensions: LWH = 1400x300x450mm Weight: approx. 70 kg
The TCAP 47 Applicator is one of the high quality closing solutions.Additional with Filler and PT one of the most usual opening and closing Solutions. The TCAP 47 combines a high quality opening and closing solution at high standart and compfort in daily use.
Eria Pompe Pacco Type: One 80-2/AA.T34 No.: 5930 Transmission: Spaggiari Transmissioni Type: RM 100/1 No.: 101730/99 Macdonald: Ercole Marelli Power: 9.2 kW Condition very good Dimensions: LWH = 2200 x 400 x 570 mm
Solid stainless steel case Transmission: Motovario speed controlled 190/1000 min-1 Type: TKR/100 Engine: Ercole Marelli Power: 7.5 kW, approx. 5 t / h 380 V good condition Dimensions: LWH = 2000 x 400 x 550 mm Weight: approx. 4100 kg
Make: Allweiler Type: SZBP 100.1 E 11 P01 No.: 7602467 Q = 5-25 l / min = 300-1500 l / h n = 40-140 min-1 Year of construction: 1995 Condition very good Spare parts: 1 stator speed-controlled drive North Type: SK255F AL-R1500-100 L / 4E Dimensions: LWH = 1400x300x650mm Weight: approx. 120 kg
Attachment: eccentric screw pump used Manufacturer: Netsch Type: NE 30 A Commissions No.: 305699 Machine number: 115945 Year of construction: 1980 Capacity: 2, 1 m³/h at 6 bar Speed: 355 1/min
Make: Netzsch Type: NES 30A No.: 40500562 / 01 Machinenr.: 255281 Year of construction: 1994 very good condition Gear: Stöber Type: C002N-0041-D90 L4 No.: 1088609 n = 330 min-1 Engine make: DIEZ Power: 1, 5kW Dimensions: LWH = 1300x250x270mm Weight: approx. 80 kg 2. Pump: identical, but with an off switch and adapter onto screw approx. 50 l Total height: 900 with funnel
Attachment: eccentric screw pump used Manufacturer: Allweiler Type: SNP 25.1 Version: H1P01 Machine number: 7655566/2 Year of construction: 1982 Capacity: 10L / min Speed: 230 RPM
Type: NUP 60 Machine number.: 218338 Com.: 205639 Year of construction: 1990 with screw feeder and paddle mixers Stöber gear Type R76-1027-750-4 No.: 874256 Rpm: 136-680 RPM Drive motor: DIETZ No.: 3807028 403195 B5/300 Power: 7,5 kW Paddle mixer power: 1,5 kW Mixing trough attachment approximately 150 l stainless steel Dimensions: LWH = 2400x630x1150mm with switchgear Weight: 600 kg
maximum number of results exceeded
please refine your search
4.000 € 
