dosing station used for sale

General SKU327T863 LocationBarneveld MakeAT Hefele GmbH Main Features MaterialStainless steel Motor0.55 KW Specified Features - Bag dump station Metering screw(DMN Westinghouse, typ: BL 175-1, 15 rpm., motor: 0,55 kW 220-240/380-415 Volt) With hoppercheck Capacity500 Ltr. Hopper sizesdia. 1200x750 mm (shape of cone) Inlet1200x470 mm Outlet175 mm With vibro motor(0,18 kW 220-240/380-415 Volt, 3000 rpm. (Ex): Brabender Technologie KG) Bag dump stations MaterialStainless steel 1.4301 (304), Stainless steel 1.4404 General TypeSackaufgabestation Typ 500 No.75.170384-3 Year of construction2008 Mounted on legscheck Floorspace1,05x1,25 m Total height3,7 m Weight650 kg ATEX designedcheck Extra information Extra Specificationswith: flanged round filter (with suction: 1,1 kW 220-420 Volt)discharge unitPaints & coatingsPowdered foodsGeneric medicinesTea, herbs & coffeeFin ...

Source: TruPulse 124 Wavelength of the laser light:1064 nm Maximum average power:140 W Minimum pulse output:300 W Maximum pulse output:6 kW Minimum pulse duration:0.3 ms Maximum pulse duration:50 ms Maximum pulse energy:30 years Maximum pulse repetition rate:833 Hz Beam parameter product:16 mm-mradX-axis:450 mm Speed:3000 mm/min Positioning accuracy:± 0.05 mm Repeatability:± 0.02 mmY-axis:300 mm Speed:3000 mm/min Positioning accuracy:± 0.1 mm Repeatability:± 0.02 mm Z-axis:300 mm Speed:3000 mm/min Positioning accuracy:± 0.05 mm Repeatability:± 0.02 mmRotary axis Turntable:120 mm Free inner diameter:45 mm Maximum speed:80 rpm Diameter of three-jaw chuck:80 mm Central passageways:16 mmClamping range, inside:2-71 mm Clamping range, outside:22-69 mm

General SKU231U202 MakeEmde Nassau TypeBE 1600 No.5557-1 Year of construction2000 Main Features MaterialMild steel Motor0.35 KW Inlet diameter240 mm Specified Features - Bag dump station Inletdia. 240 mm Outletdia. 200 mm Without motorcheck With vibro motor0,35 kW 220-230/380-400 Volt Bag dump stations MaterialMild steel General Mounted on framecheck LocationBarneveld Floorspace1,2x1,2 m Total height1,9 m CEcheckPaints & coatingsPowdered foodsGeneric medicinesTea, herbs & coffeeFine chemicalsStarchRubberAgrochemicalsSpicesPlastic & polymersBag dump stationsCatalysts & fillersFeed additivesDetergent & surf.Other pharmaceuticsFood additivesSugarAnimal feedSolid pharmaceuticsDyes & pigmentsMinerals & inorganicEmde NassauIndustries > Chemical > Paints & coatingsIndustries > Food & Feed > Powdered foodsIndustries > Pharmaceutical > Generic medicinesIndustries > Food & F ...

General SKU410X1241 LocationBarneveld CEcheck MakeAzo Main Features MaterialStainless steel Motor0.15 KW Inlet diameter800 mm Specified Features - Bag dump station Hopper sizesø 800x600 mm Inlet800x500 mm Outletø 600 mm With vibro motor0,15 kW (400 V, 2650 rpm) Bag dump stations MaterialStainless steel 1.4301 (304), Stainless steel 1.4541 (321) General TypeET 800 H VR No.1394703-01 Year of construction2018 Floorspace1,20x1,00 m Total height1,20 m Weight350 kg Extra information Extra SpecificationsBagdump station, volume 200 l., with vibro sieve, 2x sieve deck, nylon,  perforation 0,3x0,3 mm and 0,5x0,5 mm  Paints & coatingsPowdered foodsGeneric medicinesTea, herbs & coffeeFine chemicalsStarchRubberAgrochemicalsSpicesPlastic & polymersBag dump stationsCatalysts & fillersFeed additivesDetergent & surf.Other pharmaceuticsFood additivesSugarAnimal feedSolid pharm ...

Used 5-stage evaporation station made by Unipektin. Technical data: - Year of manufacture: 1986 - 5-stage evaporator with aroma trap - Input: raw juice: 22730 l/h - Input: filtered juice: 12810 l/h - Output: juice after the first cycle: 13825 l/h - Output: concentrated juice 70 Bx: 3745 kg/h - Heating steam requirement: 5450 kg/h - Electricity requirement: approximately 150 kW (without refrigeration units) - Water requirement: 10 m3/h - Aroma yield (150 times) 150 l/h - Aroma outlet temperature: 7 degrees C - Condensation efficiency: 9,200,000 kJ/h

General SKU379X945 LocationBarneveld CEcheck MakeBrabender TypeMeasuring mixer 350E Main Features MaterialStainless steel Motor22.2 KW Specified Features - Viscosity test machine Viscosity meterMeasuring extruder mixer Motor5,8 kW, 3x 400 V Variable speedcheck Speed0,2—200 rpm With Screencheck General No.1936157 Year of construction2021 With switchgearcheck Floorspace0,63x1,17 m Total height1,30 m Weight900 kg Extra SpecificationsWith universal docking station, 22,2 kW, 3x 400 volt, (2019)Lab station, model 815809, (2019), 25 kW, 3x 400 volt, 350 rpm,&:nbsp:OintmentsRubberPlastic & polymersFeed additivesFood additivesViscosity test machinesBrabenderIndustries > Pharmaceutical > OintmentsIndustries > Chemical > RubberIndustries > Chemical > Plastic & polymersIndustries > Food & Feed > Feed additivesIndustries > Food & Feed > Food additivesPlastic machinery > Visco ...

We offer this used Weber Ultrasonics Saphir Digital Manual Station Ultrasonic Welding Machine, built in 2023. About 92500 units were produced with this machine. Sonotrode TR35Ti Frequency: 35kHz Power: 1000W 230V AC Displacement measuring system: 26.88 mm Minimum force: 34 N Maximum force: 500 N Low Level: 0 N Low Offset: 0 N If you have any questions or need more information, please feel free to send us a message or give us a call.

The weber ultrasonic saphir digital station is used for ultrasonic welding. The system is sold with a machine table and workpiece holder as shown in the pictures. Frequency 35kHz, Power 1000W, 230V AC (Schuko plug), Sonotrode TR35Ti, Min force 30N, Max force 380N The touch panel has a small defect, but the use is not affected.

General SKU327X679 LocationBarneveld CEcheck MakeLauda Main Features Heating (medium)Water glycol Capacity5.7 KW Specified Features - Temperature control unit Temperating machinepumpstation With pump2x Grundfos Motor2 x (2,2 kW, 400V) MaterialCopper General TypeLSI 51 437 Mach.No.HKS08079 Year of construction2008 Mounted on framecheck With switchcheck Floorspace1,00x2,00 m Total height1,25 m Weight1000 kgConsumer wastePaints & coatingsPowdered foodsGeneric medicinesOintmentsTea, herbs & coffeeFine chemicalsStarchOther chemicalRubberBiotechnologyAgrochemicalsSpicesPlastic & polymersTemperature control unitsCatalysts & fillersFeed additivesPaper & otherSolventsDetergent & surf.Other pharmaceuticsCosmeticsOrganicsE-waste & metalFood additivesSugarLubricants & oleoDairyAnimal feedOther feedConfectionerySolid pharmaceuticsBeveragesDyes & pigmentsBiopharmaceuticalAPIPlast ...

Tool grinding machine, grinding machine, angle grinder, turning steel grinding machine, steel grinding machine -Transfer in current condition as seen -Machine must: be overhauled electrically (FI circuit breaker trips) -Grinding points: 4 -Angled tables on vibrating tables: 3 -Vice for chip breaker groove: 1 -Max. Steel cross section: mm -Number: 1x grinding machines available -Price: per piece -Dimensions: 1500/1500/H1400 mm -Weight: 1004 kg

Grinding machine, angle grinder, lathe tool grinding machine, thread drill grinding machine, milling cutter grinding machine, surface grinder, drill grinding machine, bench grinder -Manufacturer: Wilhelm Simon, 2-station tool grinding machine -Motor power: 1 kW -Speed: 2800 rpm -Grinding discs: Ø max. 150 mm -Coolant system: Pump missing, can be replaced for an additional charge -Dimensions: 1430/780/H1380 mm -Weight: 456 kg

Grinding machine, angle grinder, lathe grinder, thread drill grinder, milling cutter grinder, surface grinder, drill grinder, bench grinder, tool grinder -Manufacturer: Bösch, tool grinding machine type L 15 -Grinding discs: Ø max. 150 x 32mm / framed Ø 125 mm see photos -Motor power: 0.55 kW -Speed: 2800 rpm -Coolant device: -Dimensions: 1110/480/H1310 mm -Weight: approx. 182 kg

Grinding machine, angle grinder, rotary steel grinder, thread drill grinder, milling cutter grinder, surface grinder, drill grinder, bench grinder, double bench grinder -Manufacturer: Gebr. Bayer, tool grinding machine with 2 stations -Motor power: 0.75 kW -Speed: 2800 rpm -Grinding discs: Ø max. 225/160 mm -Coolant device: -Dimensions: 1210/710/H1340 mm -Weight: 195 kg

Description In mailing lines, the folding unit is always in a different position. Sometimes at the beginning, in the middle or at the end. Due to the units that come before or after the folding unit, height adjustment is always necessary. The folding units should also be equipped with a self-control system and a self-drive so that they can also be operated separately if necessary. Ruler infeed as 3rd station Roller diameter 40mm Upstream cutting shaft pair Motorized height adjustment 8 pockets with working width 64 cm Downstream double cutting shaft pair Noise protection

Platform Base for Fortuna Roll Presses Mobile Stationary Suitable for Fortuna automatic roll presses and other manufacturers (Fortuna semi-automatic, fully automatic machine, size 3/4) With deep heavy-duty castors or stationary as required With screw-on thread Made of solid stainless steel plate

General SKU392U1284 LocationBarneveld MakeSKAN Main Features MaterialStainless steel Specified Features - Miscellaneous filter Filtercheck Filter surface± 0,03 m² MaterialStainless steel 1.4401 (316) General TypeAFS 002 Year of construction1992 Floor space1,1x0,95 m Total height1,8 m Weight230 kg Extra information data vessel: brand: De jong gorredijk B.V. vollume: 100 Ltr. material: 1.4401 pressure: 4bar max temp.: 50°C year: 1992. flow meters: Brand: Endress+hauser type: promag 53 pump: brand: socsil-inter sa Type: A1 24000 nr: 10156 year: 1994 motor: 0,75kW, 220/380Volt 583rpm Fine chemicalsBiotechnologySolventsMiscellaneous filtersSKANIndustries > Chemical > Fine chemicalsIndustries > Chemical > BiotechnologyIndustries > Chemical > SolventsFilters > Miscellaneous filtersBrand > SKAN What you can expect from Foeth: -- Machine is in working condition -- At a reduce ...

Lg.Nr. 26090 Technical data: - Standing version - Max. operating pressure 10 bar - Pressure vessel capacity 270 l - Intake volume 585 l/min - Delivery rate 440 l/min - Compressor speed 1200 rpm - Drive 400 V / 4.0 kW - Kettle diameter approx. 600 mm - Space requirement approx. W 800 x H 1850 x D 900 mm - Weight approx. 150 kg

General SKUR0226 LocationBarneveld MakeLuco Technic GmbH (D) TypeBulk material emptying and filling station Main Features MaterialStainless steel Inlet diameter350 mm Specified Features - Bag dump station Screw diameter350mm Pitch200mm Shaft diameter90mm Screw length1200mm With hoppercheck Hopper sizes950x1100mm Inlet950x1100mm Outlet650x800mm With motorcheck Bag dump stations MaterialStainless steel 1.4306 (304L) General No.886 Year of construction1991 Mounted on legscheck Floorspace2,2x1,7 m Total height3,9 m Weight1950 kg Extra information Extra SpecificationsDevice for cutting flexible containers containing fungible material Abstract: Apparatus for cutting bags containing tricklable materials, as well as for separating the goods from bag parts, with a sieve drum and separate outlets for the bag parts, oversized particles, and the goods to be discharged, c ...

4-station bookbinding press for gluing blocks MURO 4 x 5000 A4/HAD - Lidograf printing machines Menu Home About us Offer Gallery We buy Contact en pl 4-station bookbinding press for gluing blocks MURO 4 x 5000 A4/HAD Search: Search Technical condition: New Used Categories: Bookbinding machinery Bookletmakers Box production Collators Creasers Die Cutting Machines Folding machines Gluing machines Guillotines Joggers Laminators Offset printing machinery Others Paper drills Perfect binders Pile turners Spare parts Stitching machines 4-station bookbinding press for gluing blocks MURO 4 x 5000 A4/HAD Price: 2750 EUR Download PDF 4-station bookbinding press for gluing blocks MURO 4 x 5000 A4/HAD Solid construction, waterproof board, and galvanized components. The machine is in perfect condition. Technical specifications: Format: 350x320x550 (W/D/H) Number of stations: 4 Power supply: 230V Maxim ...

Just Normlicht Proof Control Station - Lidograf printing machines Menu Home About us Offer Gallery We buy Contact en pl Just Normlicht Proof Control Station Search: Search Technical condition: New Used Categories: Bookbinding machinery Bookletmakers Box production Collators Creasers Die Cutting Machines Folding machines Gluing machines Guillotines Joggers Laminators Offset printing machinery Others Paper drills Perfect binders Pile turners Spare parts Stitching machines Just Normlicht Proof Control Station Price: 3750 EUR Download PDF Just Normlicht Proof Control Station Ideal as a control desk for a printing machine. 230V power supply 3 drawers + opening cabinet. Keyboard drawer. Electronic light control (luminous intensity). Ask About The Product Name (required) Company name Email (required) Phone Message (required) Newsletter Do not miss the new products in our stock. Subscribe to our ...

This 3-axis Trotec Laser-Work-Station was manufactured in 2009. It features a powerful 20 W Nd:YAG / Pulsed Yb Fiber Laser with a marking field of 110 × 110 mm and a Z-axis travel of approximately 400 mm. The machine is designed for various applications including laser marking, engraving, and part identification. If you are looking to get high-quality laser marking capabilities, consider the Trotec Laser-Work-Station machine we have for sale. Contact us for further details.

A stationary Brabender residual moisture and moisture content measuring device is offered. Relative measuring range: 0.0001%H₂O-15%H₂O, absolute measuring range: 0.01mgH₂O-15mgH₂O, moisture content resolution: 0.01mg, resolution: 1ppm, relative resolution: 0.0001%H₂O, measuring temperature range: 30°C-160°C, temperature setting: in 1°C increments, sample weight: approx. 0.05g-20g, max. sample volume: approx. 50cm³, accuracy: better than approx. 0.6mg, ambient temperature: +10°C to +45°C, relative humidity: 5%-95%, storage temperature: -20°C to +55°C, relative humidity: 5%-95%, measuring distance: approx. 1m, measuring height: approx. 1.6m. Dimensions X/Y/Z: 562mm/420mm/275mm, weight: 27.6kg. Documentation available. Inspection possible by appointment.

# HP Inc. HP4200 MultiJetFusion Baujahr: 2017 | Technologie: MJF | Standort: Deutschland Gebrauchtes HP4200 MJF-System aus mittelständischem Betrieb in gutem Zustand. Das Gerät wurde bis 2024 im Rahmen eines aktiven Wartungsvertrags (3DaaS) betrieben und weist weniger als 1000 Druckjobs auf. Lieferumfang 1× HP4200 MJF 3D-Drucker 1× HP Processing Station 0× Build Units Diverse Ersatzteile (Filter u.a.) Optionale Services Zertifizierte HP-Techniker bieten auf Anfrage: Fachgerechte De-Installation und Verpackung in Original-HP-Kiste (Verpackung nicht im Lieferumfang, Kaution erforderlich) Installation und Inbetriebnahme vor Ort Englischsprachige Einweisung in Bedienung, Betrieb und Nachbehandlung (3–5 Tage, je nach Umfang) Das System eignet sich für den Einstieg in die MJF-Technologie oder als Erweiterung bestehender Fertigungskapazitäten. Die geringe Anzahl an Druckjobs und der do ...

General SKU306Y630 MakeHiWay Serial24-395-01 Main Features Motor1.5 KW Length5000 mm Inlet diameter72 mm Specified Features - Vertical screw conveyor Tube-modelø 72 mm With hopperdosing screw Inletø 250 mm Motor1,5 kW (400 V, 2950 rpm) Screw speed± 300 rpm Outlet height5 m Conveying height5,3 m MaterialStainless steel 1.4301 (304) General Year of construction2024 Mounted in framecheck LocationBarneveld Floorspace1,5 x 1,5 m Total height5,5 m Weight2000 kg CEcheck Extra information Extra SpecificationsIncluded: Big-bag unloading station with - steel frame - chain hoist - product receiver with dosing screw Powdered foodsStarchRubberAgrochemicalsCatalysts & fillersVertical screw conveyorsPaper & otherOrganicsSugarAnimal feedPlastic & rubberMinerals & inorganicHiWayIndustries > Food & Feed > Powdered foodsIndustries > Food & Feed > StarchIndustries > Chemical >  ...

Doses product into trays under a weigher, The JASA filling station from 2015 sits under a weigher and catches the weighed portions in a hopper. Two flaps drop the product into the tray below, so you can fill trays of vegetables, fruit or salads neatly and without spillage., The station stands on a mobile stainless frame and has its own control box with on/off and two adjustable fill times. It runs on 230 V., Located in Emmeloord, the Netherlands. Immediately available, price on request., More photos and full specifications: stcfoodsolutions.nl/en/machine/jasa-tray-filling-station/, Type: Tray filling station, Filling: Hopper with two flaps, Controls: On/off and two adjustable fill times, Electrical: 230 V, Construction: Stainless frame on castors

General SKU224Y101 LocationBarneveld CEcheck Main Features MaterialStainless steel Motor4 KW Inlet diameter800 mm Specified Features - Bag dump station MaterialStainless steel 1.4305 (303) General MakeSAM TypeBag dump station Year of construction2019 Mounted on legscheck With switchgear(as is) Floorspace1,2 x 1,2 m Total height3,3 m Weight1.000 kg Extra information Extra SpecificationsWith WAM puls-jet dustfilter motor: 4 kW (400 V, 2670 rpm, (Ex)) 14 filtercartridges (total 2,5 m2 surface) Paints & coatingsPowdered foodsGeneric medicinesTea, herbs & coffeeFine chemicalsStarchRubberAgrochemicalsSpicesPlastic & polymersBag dump stationsCatalysts & fillersFeed additivesDetergent & surf.Other pharmaceuticsFood additivesSugarAnimal feedSolid pharmaceuticsDyes & pigmentsNew arrivalsMinerals & inorganicGerickeIndustries > Chemical > Paints & coatingsIndustries > Food & Fee ...

General SKU224Y102 LocationBarneveld CEcheck Main Features MaterialStainless steel Motor4 KW Inlet diameter800 mm Specified Features - Bag dump station MaterialStainless steel 1.4305 (303) General MakeSAM TypeBag dump station Year of construction2019 Mounted on legscheck With switchgear(as is) Floorspace1,2 x 1,2 m Total height3,3 m Weight1.000 kg Extra information With WAM puls-jet dustfilter motor: 4 kW (400 V, 2670 rpm, (Ex)) 14 filtercartridges (total 2,5 m2 surface) Powdered foodsGeneric medicinesTea, herbs & coffeeFine chemicalsStarchAgrochemicalsSpicesBag dump stationsCatalysts & fillersFeed additivesDetergent & surf.Other pharmaceuticsSugarAnimal feedSolid pharmaceuticsDyes & pigmentsNew arrivalsMinerals & inorganicGerickeIndustries > Food & Feed > Powdered foodsIndustries > Pharmaceutical > Generic medicinesIndustries > Food & Feed > Tea, herbs & coffeeIndus ...

General SKU271X308 LocationBarneveld CEcheck MakeMecabag System Main Features MaterialStainless steel Motor0.74 KW Number of1 heads Specified Features - Powder filler Powder fillercheck Bag fillercheck Number of dosing heads:1 MaterialStainless steel General TypeT/01 40975597 Mach.No.RX023/14 Year of construction2014 Floor space2,0 x 1,60 m Total height3,80 m Weight2500 kg Extra information Hopper dimensions 1500x1300x400 mm, input dia. 200 mm  Powdered foodsGeneric medicinesTea, herbs & coffeeStarchSpicesCatalysts & fillersPowder fillersFood additivesSugarSolid pharmaceuticsDyes & pigmentsBiopharmaceuticalMinerals & inorganicMéca Bag SystemIndustries > Food & Feed > Powdered foodsIndustries > Pharmaceutical > Generic medicinesIndustries > Food & Feed > Tea, herbs & coffeeIndustries > Food & Feed > StarchIndustries > Food & Feed > SpicesIndustries > Chemical > Ca ...

pressure:400 t distance between columns:1100 mm stroke:250 mm no. of strokes:25 - 75 /min distance table/ram, max. stroke up, adjustment up:900 mm table surface area:1100 x 965 mm capacity of ejector in table:30 t ejector stroke of ejector in table:80 mm capacity of ejector in ram:3 t stroke of ejector in ram:60 / 70 mm ram surface:980 x 800 mm column travel -side:800 mm ram adjustment:20 mm power capacity:80,0 + 5,5 kW weight:47,0 t Dimensions (WxDxH):3,5 x 3,3 x 6,0 m weight of switch cabinet:1,4 t dimensions of electrical cabinet (WxDxH):4,9 x 0,5 x 2,6 m ejector in ram:hydraulic

pressure:400 t distance between columns:1060 mm stroke:450 mm no. of strokes:15 - 30 /min distance table/ram, max. stroke up, adjustment up:1160 mm table surface area:1000 x 700 mm capacity of ejector in table:2 x 16 t ejector stroke of ejector in table:125 mm Die cushion pressure in table:120 t Die cushion stroke in table:2 mm capacity of ejector in ram:2 x 4 t stroke of ejector in ram:100 mm ram surface:1000 x 700 mm column travel -side:630 mm power capacity:55,0 kW weight:50,0 t die cushion in table:2. station

Well preserved cabinet for dosing of hazardous liquid chemicals. Cabinet is closed and has 2 PVC sliding doors and is equipped with valves, leakage and door monitoring. Previous use with HCI and NaOH. Without control and pumps.

Epson G10-854SR Robot Screwdriving Station Dosing Station Assembly of parts for car radios and navigation systems and for testing them. The assembly station is designed as a closed aluminium frame with a steel welding frame inserted and has a very compact design. The control cabinets and valve terminals are integrated into the system. All movement processes during the operation of the system can be tracked on all sides through large windows and doors. Operation is via a touch screen. The assembly station is divided into substations 3.1 dosing area, 3.2 assembly area KK+SW and 3.3 mounting area front. (KK=heat sink, SW=bulkhead angle) The work steps according to these assembly areas are described below: St.3.1: Dosing range - a WT with attached chassis and printed circuit boards enters the dosing area via the transfer belt. - this is stopped at the stroke positioning ...

Small dosing accumulator with screw conveyor for cable recycling plants, wood chips, etc. Capacity approx. 650 litres or 400 - 500 kg of pre-shredded old cable Adjustable conveying speed with frequency converter/inverter 0 - 16 rpm Drive only 0.55 kW with reduction gear Discharge height approx. 750 mm Dimensions (LxWxH): 2,200 mm x 800 mm x 1,800 mm Mobile via large heavy-duty castors with brakes

Dosing container 10.5m³ capacity Steel grade S355 Overall channel low-stress annealed 10mm Hardox 450 wear protection in the gutter bottom 2 x Unbalance Motors Various hood options, possibly with extraction connections Electrically driven slide for dosing For material eg: copper and plastic according to photo, but with drive and painted Other options: 3-Sided Wrap Guard 400mm Hood according to drawing Control box for stand-alone operation, with FU without Hardox wear protection Channel without container, frame, etc., incl. drives Reserve drive

Dosing bunker incl. dosing roller Manufacturer: BOA / HUBER Type: 1500 H KTH 5700/ RH Year of Make: 2010 Technical data for the feed hopper (chain belt conveyor): Manufacturer: BOA Type 1500 H KTH 5700 Year of construction 2010 Length of feed belt 5700 mm Incline 0° Usable width 1400 mm Technical data of the dosing drum: Manufacturer: Huber Technik Fördersysteme Type RH Dosing Drum Year of construction 2010 Drive power 4 kW

Dosing station for lye Stabicip 0 X 1 380 V, 50 Hz; 6 bar 2 Piece Unit price 450,-both for 800,-

Dosing station for lye Stabicip 0 X 1 380 V, 50 Hz; 6 bar

Laboratory foam dosing station with foam mixer and applicator The system works in a similar way to the SUPRA MIX concept. Several chemicals are dosed and mixed with water and air in a controlled ratio. Recipes are stored on the controller and can be changed on the fly. Foam applicator with mixer • Dynamic foam mixer with online dosing of 5 products + water • 5 dosing pumps • A direct inlet for the mixture • Product monitoring for chemicals • Air dosing valve • Dynamic foam mixer with adjustable speed • PLC control • Foam applicator • For one-piece carpets up to 1 m wide Uses Stain Blocker Dirt, water and oil repellents Fluorocarbons Anti-Static Chemicals Plasticizer Flame retardant Antibacterial chemicals Moth and beetle repellents Pile stabilizers Anti-hair loss agent Resins for wrinkle prevention and dimensional stability Specificat ...

Glue dosing station MAYER AND MAYER DXR R2020R L-P-PUB PDX20 40-100 P manufactured in 2015 in Germany by MAYER & MAYER HANDELS GMBH. The station was in use for about 3 months in the process. After this time, it was shut down, cleaned and properly secured. All gaskets in the station were replaced with new ones. It is a charging station for manual dispensing / application guns for two-component adhesives. The gun is included for free. Spare parts are offered for the station. Price of the parts to be individually agreed.

Chemical dosing station PAGUS plastic cabinet 710 x 800 x 1690 mm 2 Air diaphragm pump and various valves and sensors cabinet almost metal-free ! Dimensions: 750 x 950 x 2100 mm

Intergas dosing unit DSD 500, type A, foaming unit and gas dosing station At the moment we have an intergas dosing unit for sale. This was a part of a project. Therefore the machine was used only very limited. - Operating hours: well below 100h - Weight: approx. 500kg Find more here - .ucymachines/

Stainless steel machine for industrial filling of thin liquid products by gravity, Solenoid valve dispensers are specially designed for filling thin-liquid products. Partial dosing or full filling (cold or hot filling) can be used. in cans, jars and bottles take place., By using an interchangeable star and a manual height adjustment, a short-term changeover to a different can, jar, or bottle size. The dosing range can be expanded as required using time-controlled valves., 4-digit in-line filler for dosing liquids,, was used for brine for sausages in jars,, Diameter of the filling elements: approx. 20 mm,, power: up to 80 fillings / minute, Dimensions / weight: 2350 mm x 1250 mm x 2200 mm, peso del eje - trasero: 2350 mm x 1250 mm x 2200 mm, Overall dimensions: 4300mm x 700mm x 1950mm.: up to 80 fillings / minute, 84439959 Códigos SH Classificação de outros: up to 80 fillings / minute

Dosing station / pumping station for dosing dangerous liquid chemicals. The cabinet is completely closed with cabinet exhaust air, supply air filter, compressed air unit and compressed air diaphragm pumps. With the dosing station, the chemical was pumped from the fixed tank or IBC into the distribution network. The system is of very high quality and can be used for many chemicals. 2x compressed air diaphragm pumps Almatec Futur 50T / 1x Almatec E10TTT, valves, sampling box, flow regulator with pressure sensor, flushing with a spray gun, compressed air unit, switch cabinet with control panel (touch screen) and interface.

The cabinet (Hydrochloric acid tank modul) is completely closed with cabinet exhaust air, supply air filter, compressed air unit as well as a chemical centrifugal pump and compressed air diaphragm pump. With the unloading module, the delivered chemical was conveyed through the filter into a storage tank. The system is of very high quality and can be used for many chemicals. 1x centrifugal pump (manufactured by Richter type MNK-B / F-P 50-32-125) / 1x Almatec Futur 50T, 1x Almatec A10TTT, valve and filter units, sampling box, flow regulator with pressure sensor, flushing with a spray gun, compressed air unit and electrical cabinet

Ex-proofed solvent preparation station made of stainless steel. The station consists of: -> 3 pcs. compressed air driven diaphragm pumps -> stainless steel solvent tank -> drip pan made by Denios -> ex-proofed agitator and stainless steel reactor -> stainless steel piping

Filling station, bagging station for big bag, octabine with material conveying blower Big Bag filling station with conveyor blower for filling regrind or granules in Big Bag 1.5 m³ The Big Bag filling station is robust and easy to handle. The system is ideal for use where dry granules or regrind are to be filled into octabine or big bag. Compact versions have been developed for smaller containers such as small boxes and sacks. These filling stations are ideal for smaller granulators or insert mills to fill smaller quantities of regrind into small boxes or bags. With a sophisticated design and a wide range of combinable options, the filling station can be filled for various bulk materials. The frame and the entire construction is made of sturdy profiled steel materials. Material handling system | Filling station, emptying station for one or two big bag or octabin or for small ...

propulsion: motor with brake, velocity is adjustable due to the possibility to change the gear wheel description: Type of transport chains: 4 chains, able to handle half pallets; pitch 355mm Remarks: as in an usual crate onveyor a stopper with an air cylinder is used; the pallets go against the stopper and are centered by this into their short side direction, after that the stopper goes back and the pallets continue to move on; able to handle half pallets availability: immediatelly Usable width: 1090 mm Installation dimension: 1500 x 1400 x 600 mm weight (m) [kg]: 200 kg Besides buying and selling of conveyors and machines our strength lies particularly in services and project planning, as for example in rebuilding and adapting of your installation as well as in overhaul and relocation of machines. You have a first idea or even a concrete plan? It does  ...