dosing station used for sale

- 8 heads - All stainless steel - Range 50 gr to 2000

Manufacturer: Atoma Model: 823-C-400 Year: 2000   Number of weighing channels: 3 Maximum weight: 400 g Margin of error (e): 0.5 g   Feeding by hopper and vibrating lane. Conveyor belt Product stop by cell

Type : piston filler Mode: Automatic / semi-automatic (shot by shot) Operation : pneumatic Foot pedal action Dosing pump: manual adjustment Feeding hopper Material : Stainless steel Temperature sensor

ENDLESS DOFFERER For the automatic dosing of powdered products to the packaging machine with high precision. CHARACTERISTICS: Made of stainless steel. Height adjustable. Dosing speed commanded by servo motor. Stirrers independently driven by geared motor 50 dm³ hopper with easy opening for cleaning. sanitary filter Hopper level to regulate automatic feeding. Complete set of auger in stainless steel.

Epson G10-854SR Robot Screwdriving Station Dosing Station Assembly of parts for car radios and navigation systems and for testing them. The assembly station is designed as a closed aluminium frame with a steel welding frame inserted and has a very compact design. The control cabinets and valve terminals are integrated into the system. All movement processes during the operation of the system can be tracked on all sides through large windows and doors. Operation is via a touch screen. The assembly station is divided into substations 3.1 dosing area, 3.2 assembly area KK+SW and 3.3 mounting area front. (KK=heat sink, SW=bulkhead angle) The work steps according to these assembly areas are described below: St.3.1: Dosing range - a WT with attached chassis and printed circuit boards enters the dosing area via the transfer belt. - this is stopped at the stroke positioning ...

Epson C3-A601S 6-Axis Robot Assembly Station Assembly of parts for car radios and navigation systems and for testing them. The assembly station is surrounded by a protective enclosure. The service doors are equipped with interlocking monitoring switches. The doors are locked in automatic mode and can only be opened when the automazik stop or in manual mode after pressing the doors on the control panel. When the door is open, automatic operation cannot be started, the robots and servo drives of the Statioin are stopped, the pneumatic actuators are switched off and cannot be operated. This station consists of 3 functional substations: Functional sequence St.6.1: Control of ribbon cables: Lift the drive out of the chassis and tilt the drive code Control of 3 ribbon connectors by means of vision sensors on the robot gripper arm Reseat the drive in chassis St.6. ...

WSM Stationary screwdriving unit Screwdriving station Assembly station Automatic station Assembly of parts for car radios and navigation systems and for testing them. The assembly station is surrounded by a protective enclosure. The service doors are equipped with interlocking monitoring switches. The doors are locked in automatic mode and can only be opened when the automazik stop or in manual mode after pressing the doors on the control panel. When the door is open, automatic operation cannot be started. 4.6.2 Functional sequence This station consists of 4 substations: St 4.1 Screw chassis: - optical inspection of the core hole position 6 - Positioning of the screwdriver by means of XY-Z servo axis port - 5x screwing from above St. 4.2 Mounting LW angle: - manual placement of the LW angle on the cycle belt handling - eject and position the LW angle by  ...

Small dosing accumulator with screw conveyor for cable recycling plants, wood chips, etc. Capacity approx. 650 litres or 400 - 500 kg of pre-shredded old cable Adjustable conveying speed with frequency converter/inverter 0 - 16 rpm Drive only 0.55 kW with reduction gear Discharge height approx. 750 mm Dimensions (LxWxH): 2,200 mm x 800 mm x 1,800 mm Mobile via large heavy-duty castors with brakes

Scheugenpflug DOS P016 Piston Feeder Piston dosing system DOS P for a wide range of requirements The piston dosing systems from Scheugenpflug work according to the principle of volumetric dosing, i.e. the dosed amount of material is mechanically determined by the geometry and stroke of the associated cylinders. The cylinder is filled with the potting material by feeding it from the corresponding material conveyor system. If a two-component medium is used, the volume of the two cylinders simultaneously determines the ratio of the resin and hardener components to each other. The dosing pistons simultaneously push the two components in separate channels towards the exhaust valve, where they only mix in the static mixing tube to form a homogeneous reactive medium. The Dos P016 / 050 / 100 / 300 / TCA piston dosing systems are high-precision volumetric dosing systems designed for pr ...

Glue dosing station MAYER AND MAYER DXR R2020R L-P-PUB PDX20 40-100 P manufactured in 2015 in Germany by MAYER & MAYER HANDELS GMBH. The station was in use for about 3 months in the process. After this time, it was shut down, cleaned and properly secured. All gaskets in the station were replaced with new ones. It is a charging station for manual dispensing / application guns for two-component adhesives. The gun is included for free. Spare parts are offered for the station. Price of the parts to be individually agreed.

Dosing station for lye Stabicip 0 X 1 380 V, 50 Hz; 6 bar 2 Piece Unit price 450,-both for 800,-

Dosing station for lye Stabicip 0 X 1 380 V, 50 Hz; 6 bar

Chemical dosing station PAGUS plastic cabinet 710 x 800 x 1690 mm 2 air-operated diaphragm pump and various valves and sensors cabinet almost metal-free ! Dimensions: 750 x 950 x 2100 mm

Max. output: 370kg/h, connected load: 0.25kW, length: 950mm, width: 950mm, height: 1115mm, weight: 75kg, including automatic filling, frame, valve, inspection shaft and documentation.

Software included, an inspection is possible.

Filling station, bagging station for big bag, octabine with material conveying blower Big Bag filling station with conveyor blower for filling regrind or granules in Big Bag 1.5 m³ The Big Bag filling station is robust and easy to handle. The system is ideal for use where dry granules or regrind are to be filled into octabine or big bag. Compact versions have been developed for smaller containers such as small boxes and sacks. These filling stations are ideal for smaller granulators or insert mills to fill smaller quantities of regrind into small boxes or bags. With a sophisticated design and a wide range of combinable options, the filling station can be filled for various bulk materials. The frame and the entire construction is made of sturdy profiled steel materials. Material handling system | Filling station, emptying station for one or two big bag or octabin or for small ...

propulsion: motor with brake, velocity is adjustable due to the possibility to change the gear wheel description: Type of transport chains: 4 chains, able to handle half pallets; pitch 355mm Remarks: as in an usual crate onveyor a stopper with an air cylinder is used; the pallets go against the stopper and are centered by this into their short side direction, after that the stopper goes back and the pallets continue to move on; able to handle half pallets availability: immediatelly Usable width: 1090 mm Installation dimension: 1500 x 1400 x 600 mm weight (m) [kg]: 200 kg Besides buying and selling of conveyors and machines our strength lies particularly in services and project planning, as for example in rebuilding and adapting of your installation as well as in overhaul and relocation of machines. You have a first idea or even a concrete plan? It does  ...

Dosing system cabinet, system cabinet, cabinet for dosing station PROMINENT 2200 x 660 x 1600 mm usable dimensions: 2170 x 520 x 1560 mm ( width x depth x height ) 2x sliding door: 1120 x 1375 mm ( width x height ) mounting strip for dosing pumps: 2170 x 230 mm height above cabinet floor: 580 mm, distance from rear wall: 170 mm feedthroughs in left side wall: 1x Ø 135 mm / 1x Ø 75 mm / 4x Ø 32 mm penetrations in the roof area: 2x Ø 40 mm / 3x Ø 75 mm / 1x Ø 90 mm with pipe sockets pipe fittings: Outer diameter: Ø 110 mm, length: 150 mm 6 height-adjustable feet used, tested ! Dimensions ( assembled ): 2200 x 660 x 2030 mm

Dosing system cabinet, system cabinet, cabinet for dosing station PROMINENT 2200 x 660 x 1600 mm usable dimensions: 2170 x 520 x 1560 mm ( width x depth x height ) 2x sliding door: 1120 x 1375 mm ( width x height ) mounting strip for dosing pumps: 2170 x 230 mm height above cabinet base: 575 mm, distance from rear wall: 170 mm bushings in left side wall: 1x Ø 135 mm / 1x Ø 50 mm / 4x Ø 32 mm penetrations in the roof area: 4x Ø 50 mm 6 height-adjustable feet used, tested ! Dimensions ( assembled ): 2200 x 660 x 1880 mm

Piston pump for dosing, type EK 1 H, with batch-control by electric impulse batching counter. Working pressure 7,5 bar, dosing stream 290 l./h max., hose coupling Rd 34 x 1/8 inch with hose tail NW 15, with switchgear, mounted on table.

Specifications: Dosiebunker DB 3000 Dimensions: 1.50 x 2.50 x 2.75 (L x W x H) Can be used in cable recycling for granulator filling, granulate processing, plastic films, wood chips, etc. Features -Content: 3 qbm -Ruehrwerk, drive: 5.5 KW -Fuellstand control sight glass -Adjustable machine feet -Dosing screw discharge 200 mm diameter, speed control of the screw via frequency control at the control cabinet via Poti, Drop height 700 mm, screw drive power: 0.75 KW Optional with conveyor belt for filling Dosing Bunker DB 3000 Dimensions: 1.50 x 2.50 x 2.75 (L x W x H) For Cable Recycling by the Cutting Mill filling, PVC Granulate, PP or PPE, and many more Amenities -3 qbm -Agitator, Drive: 5.5 KW -liquid level indicator -adjustable machin feed -metering device for the spiral conveyer, Diametre: 200 mm, speed control for the spiral conveyer by Frequen ...

Cat. No. 13-0033 in a very good condition Typ: RF32DT71D4 Testing water by 22°C back pressure at 1 bar Pressure: 0,3 bar capacity: 5.100 litres/h Motor: 0,37 kW Connection: DN 40 - can be changed on request for an additional charge Measurements: with frame: pump: length: 33 cm 45 cm width: 20 cm 23 cm height: 84 cm 50 cm weight: 56 kg For more Information please contact us under: Phone +49(0)9353-909050 Fax: 09353-9090522, Mobile: 0171-6518248 Subject to prior sale. All prices are valid Ex-Works, excl.VAT. Freight Charges: depending on dimensions and destination.

Piston pump with drive 0.25 kW / 1.325 RPM, stroke length: 1 - 15 mm, stroke frequency: up to 110 rpm.

Piston pump with 0,25 kW / 1.325 UPM drive, stroke length: 1 - 15 mm, stroke frequemcy: up to 110/min.

New dosing pump from Prominent

Dosing unit with 6 prominent pumps (used)

Type: ZSA 1500 Working width: 1500 mm Flight circle metering drum: Ø 1600 mm Motor power: 18,5 kW Length metering device: 7800 mm Width metering device: 1600 mm Volume metering device: approx. 25 m ³

Dosing scale with precision spiral screw feeder in stainless steel version, with pre-container and weighing frame in frame, trough dimensions: 540 mm long x 370 mm wide x 320 mm high, with large loosening spiral in the trough, drive 0.47 kW via timing belt and Reduction gearbox, discharge pipe diameter: 50 mm.

Dosing scale with precision spiral screw dosing device in stainless steel design, incl. base frame, trough dimensions: 540 mm long x 370 mm wide x 320 mm high, with big aeration screw inside the trough, 0,47 kW drive via belt and gearbox, outlet tube diameter: 50 mm.

dosing pump BRAN LUEBBE for premix performance 40,000 lt/h

Electro-mechanical scale for liquids, with Hottinger load cell, pressure control valve, pneumatic outlet valve and solenoid valve. In support frame with feet.

Electro-mechanical scale for fluids, with Hottinger load cell, pressure valve, pneumatically operated slide valve and magnet valve. In base frame / stand.

Electronic water dosing device with temperature display Your advantages: fast and exact input of the water quantity Clear control panel with large, bright display compact and flour dust-proof stainless steel housing easy connection to an ice water system with Automatic Wiedehol Technical data Dosing volume range: 0.1 l - 999.9 l Temperature accuracy: display only Dosing accuracy from 1 l: +/- 0.1 l Water flow at 3 bar: up to 30 ltr./min Water connection: 3/4" external thread Power connection: 100 - 240V ; 50hz Dimensions W x H x D: 200 x 300 x 130 mm Visit our Milbrandt Outlet with many bakery machines and appliances!

Dosing quark balls or spray-moulded portioners is used for the portioning of small quantities of homogeneous masses for the fuelling of patisserie products in small volume production,all in manual operation. Robust dose quantity infinitely adjustable. All parts made of stainless steel or food-grade plastic that come with the fuel mass in a friendly. weight of the frame 1.4kg mass: approx. 300Bx430H in mm. with stainless steel stand very good condition!; available immediately!

Dosing pumps Elados EMP 12500P06 (2 stub) Elados EMP 13300P035 (1 piece) Elados EMP 14000P035 (1 piece)

see pdf attached

see pdf attached

Piston metering pump, A 125N-38/116-19 DI Doseuro, used - overhauled Special price We still have several identical and other such devices, but the amount is ending. Buy more than 1 piece, there is still a great discount. If you have a VAT number, we will gladly issue you an invoice without VAT. Used and overhauled! The part was bought from a spare parts store of a company, was overhauled by a specialised company and is in a very good condition and fully functional. Technical data: - Manufacturer: Matricola / Doseuro - 1.660L/h, 100l/h, 9 bar, 0,18KW, - Material pump: stainless steel - 35 x 18 x 38cm high, 9kg, Function guarantee! For second hand parts, we can not accept any conventional guarantee and warranty. But we give you a functional guarantee. If the device does not work within 3 months after purchase you can return the goods and we will refund the purchase pr ...

Carbon black weighing scale 400l Description attached!

Dosing with Endress and Hauser mass flow meter consisting of a cabinet (with Siemens plc and touch panel for dosage control and pneumatic valve Island) and two Endress and Hauser mass flow meters. Documentation including user's manual available

Description BINDER dosing machine is designed for dosing of liquid and pasty products to finished bags. Dosing machine automatically opens and fills the bag. Specification: Brand: BINDER Model: 871/1 Type: Filling Machine Size: 2200 x 1600 x 1300 (mm) Power supply: 400V 50 Hz 3N Power: 4kW Tank capacity: 75 l Tank pressure: 4 bar Max. temperature: 120 ° C Control: SIEMENS Control Panel Material: stainless steel/steel

Manufacturer: BARTEC Type: 250 year: 2004

Pieces of dough: 10-300 gr. Power: 10-60 pieces/ min digital control Stainless steel cladding rollable on rolls

- 5 aluminium silos with attachment filter incl. discharge screw with slide made of V2A - 4 aluminium silos for manual filling with discharge screws - 3 dosing scales - Optional with dust filter

Size: 0300, outlet opening (300x300) mm, Operating overpressure 0.8 bar, Operating temperature: 120°C

- Vibro dosing gutters/vibrosiebefrome from food production - from pasta production - in stainless steel - with several sieg inserts

Many thanks for your interest on our second hand machines, please find follow our offer: manufacturer : Collmann Type : 2x Hydo 24 chocolate depositor 1x hydraulic unit included YOM : 2001 Output : up to 25 cycle/min We offer this machine in as-is where it is condition, without warranty, ex warehouse/location (Incoterms EXW), without packaging ex warehouse Hess. Lichtenau (EXW),unpacked