129,270 used machines on RESALE, but how to find them? Machine Search
turning diameter: --- mm turning length: --- mm control: --- total power requirement: --- kW weight of the machine ca.: --- t dimensions of the machine ca.: --- m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Specifications: Travel X/Y/Z: 600 / 600 / 700 mm Motor power: 15 kW (40% ED); 10 kW (100 & ED) Speed: 18,000 1/min Tool holder: SK 40 SK 40 magazine slots: 60 Equipment: - MillPlus IT 3D path control - Horizontal tool changing device Double gripper - Automatic swivel milling head - Rotating viewing panel - NC rotary table with pallet carrier - Rotary pallet changer - 2 pallets 630 x 500 mm - Universal milling head with controlled B-axis SK 40 (only in combination with motor spindle SK 40) - Tool holder for HSK-A63 according to DIN 69893 - Electronic handwheel - Mode 4: Advanced manual intervention - Flushing gun with pump - Tool breakage detection SK 40 mechanical design, range: 63...310 mm / +/- 3 mm - Interval switching chip conveyor - Internal coolant supply can be switched from 40 bar to 80 bar
Inv. Num. : 8838 Type: DMU 60 Producer: DMG Generated: Parameters: Control system: HEIDENHAIN TNC 426 PB Switch-on hours: 92023 h Hours: 33297 h Work table length: 630 mm Work table width: 500 mm Maximum table load (even): 500 kg X-axis travel: 600 mm Y-axis travel: 700 mm Z-axis travel: 600 mm Machine weight: 7500 kg
GeneralUniversal milling machine with duoblock construction; Control: CELOS with Siemens 840D sl Operate Working area 1Longitudinal800 mmCross1050 mmVertical850 mmTechnical DataFeed rate longitudinal/transverse/vertical60000/60000/60000 mm/minRapid traverse longitudinal/transverse/vertical60/60/60 m/minTool changerApplicationUniversal Tool changer planehorizontal Type of magazineWheel Type of gripperDouble gripper Number of tools123 Coolant supply ICSCoolant supply: coolant through spindle centre form AD 40 bar/23 l/min(theoretical pump performance) rotating clear-view window Multi-jet unit at universal head, switchable from coolant to air (max. 6 bar, 6 water jets, 4 air jets) pump output (theoreticChip removalChip removal: 2 worm conveyors in the machine bed convey into a chip conveyor (scraper flight conveyor), with interval control, placed at right angles. discharge height: 950 mm / ...
x-travel: 3.400 mm y-travel: 3.400 mm z-travel: 1.600 mm Control: CELOS 840D sl Op Siemens Main spindle:: max. spindle speed: 20 - 15.000 min/-1 power capacity - main spindel: 52 / 42 kW tool taper: HSK-A100 max. Torque: 404 / 280 Nm swivellable: B: -30° / +180 ° NC-Rotary table:: table diameter: 2.500 x 2.000 mm max. table load: 10.000 kg table speed: 5 min/-1 distance spindle center to table: hor.: 130 - 1.730 mm distance spindle center to table: vert.: 230 - 1.830 mm distance spindle nose and table: hor.: -1.500 - 1.900 mm distance spindle nose and table: vert.: -1.600 - 1.800 mm Tool-Presetter:: type: 5x Rad- / Wheel number of toolpositions: 303 pos. max. tool diameter: 110 mm max. tool-dia with free toolbox: 280 mm max. tool length: 900 mm max. tool weight: 45 kg tool changing time: 7,5 sec tool taper: HSK-A100 feeds:: rapid traverse: 60 / 30 / 40 m/min total power requirement ...
Key data: 1250 mm, 800 mm, 800 mm
Description Technical details x-travel 1250 mm y-travel 800 mm z-travel 800 mm Control HH 426-430 Speed range - infinitely variable from 0 to 12,000 rpm Table surface 1,500 x 1,050 mm Table load 2.50 t Number of T-slots 10 T-slots - spacing 100 mm T-slots 18H7 Tool holder SK40 DIN69871 Tool change 30 Tool - max. 420 mm Weight of the tools max. 10 kg Feed speeds from 20 to 10,000 mm/min Rapid traverse 24 m/min See pictures If it is electrified, it can be tested.
GeneralVertical Machining Center; Control: Control SIEMENS 828D CharacteristicsTable surface850 x 650 mmWeight approx.5600 KgRapid feed X / Y / Z24/24/24 m/minMovement X / Y / Z550/550/510 mmSpindle taperSK 40 DIN 69871 Tool Magazine with24 PositionsMax. torque83 NmTorque (100% DC)57 NmDrive power (40% DC)13 kWSpeed max.12000 rpmDrive power (100% DC)9 kWDimensions (L x W x H)3,07 x 2,67 x 2,84 mMechanical preparation for Oil-Mist Extractor UnitMechanical preparation for Oil-Mist Extractor Unit (opening diameter: D150 mm)SK40 interfaceTool clamping SK 40 for pull-studs DIN 69872Electronic HandwheelExternal electronic Handwheel
Key data: 500 mm, 400 mm, 400 mm
DECKEL DMU 50T Heidenhain Control LE 412M Year of manufacture 2001 16-speed tool changer Working area 500 x 400 x 400 mm Feeds 5000 mm/min, rapid traverses 12000 m/min Direct displacement measuring system with rotary encoders (axes are displayed on the screen) Spindle speed max. 9000 rpm Rotary table B- and C-axis Coolant treatment El. Handwheel TFT Monitor Very good condition! If you have any questions, please feel free to contact Mr. Zölch directly: Tel. 0174-9119460 A viewing is possible by appointment. Second-hand goods are sold outside the warranty. Bought as seen. No returns.
A defective vertical CNC machining center DMG Mori is available. Travel X/Y/Z: 835mm/510mm/510mm, tool stations: 20, tool holder: SK40, speed: 10000rpm, table dimensions X/Y: 1000mm/560mm, T-slot spacing: 100mm, max. table load: 800kg, table height: 720mm. Control: Heidenhain TNC 530, operating hours: approx. 29836h. Either the pneumatic release cylinder or the spindle is defective. Documentation available. On-site inspection is possible.
x-travel: 800 mm y-travel: 700 mm z-travel: 550 mm Control: Heidenhain TNC 530 total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
- Work piece up to 1530 x 1295 x 3500 Kg - Tool size up to 650 mm length and 30 Kg - Tool size up to 400 x 250 mm and 30 Kg - Extende feed rate up to 15 kN-100% ED - Coolant Filtration - BLUM Laser NT - 3D Quick ser - MPC protection - 3D Measuring probe - DXF Import - Tool package 180 Tool HSK-100A - 2 x Cast iron angle plates 1500 mm - 15000 Working hours - 1e owner machine
turning diameter: 400 mm turning length: 1100 mm control: Siemens Sinumerik 840D SL greates pass round over bed: 500 mm Swing dia. over traverse guideway: 370 mm Main spindle:: Max. rpm: 5000 min/-1 power capacity - main spindel: 17 / 25.5 kW max. Torque: 345 Nm spindle diameter in front bearing: 130 mm spindle bore: 67 mm chucking diameter: 325 mm spindle nose: A8 axis stroke:: x-axis: 750 mm y-axis: +/- 100 mm z-axis: 1200 mm feeds:: rapid traverse: 40 / 40 / 40 m/min Tailstock:: tailstock: 1200 mm taper of center: Mk 5 tension force: max. 8 kN milling head: b-axis: +/- 120 ° tool taper: HSK A 63 tool piece magazine with: 60 spindle turning speed - stepless: 12000 U/min spindle motor: 10,5 kW max. torque on the spindle: 90 Nm total power requirement: - kVA weight of the machine ca.: 9 t dimensions of the machine ca.: 4,6 x 2,5 x 2,82 m Equipped with: - Siemens 840D SlimLine / Cel ...
x-travel: 800 mm y-travel: 800 mm z-travel: 800 mm control: SIN840D spindle turning speed - stepless: 5 - 10.000 U/min power capacity at 40 % load: 38,00 KW power capacity at 100 % load: 25,00 kW max. torque at 40% / 100% load: 288 / 187 kW spindle diameter in front bearing: mm spindle taper: HSK 100 feed X/Y/Z/-axis: 0 - 60.000 mm/min rapid traverse X/Y/Z: 60,00 m/min feed capacity X/Y/Z: 12,00 kN B - axis: 180 x 0,001 ° rapid travel B-axis: 10,00 U/min size of pallet: 800 x 630 mm table load: 0,80 t C-axis: 360 x 0,001 ° rotary table speeds infinitely variable: 1 - 800 U/min power capacity - table: 13,85 kW max. torque on the faceplate: 1.550 Nm toolpiece magazine: chain magazine: 60 Stück tool diameter: 110 mm wotkpiece diameter with 2 vacant positions: 230 mm tool length - max.: 450 mm weight of tools max.: 30,00 kg total power requirement: 80,00 kW weight of the machine ca.: 18,0 ...
2 x poles BAZ Manufacturer: DMG Type: DMP 60s BJ: 2004 and 2003
5 Axle BAZ DMG DMU 50 evo BJ 2000 more technical data and more pictures on request
Milling machine DMG DMU 100t BJ 2003 more technical data and more pictures on request
turning diameter: 390 mm turning length: 2250 mm control: Sinumerik 840D swing diameter: 610 mm cross movement. (x-axis): 605 mm longitudinal traverse (z-axis): 1.870 mm y-axis: 210 mm b-axis: 240 ° Axial travel (X2) / Longitudinal travel (Z2): 267/1.840 mm Longitudinal travel (Z3): 1.840 mm main spindle: - clamping chuck diameter: 250-315-400 mm bar material dia.: max 82 mm spindle head: Ø 220H5 spindle bore: Ø 118 mm Clamping tube inner diameter: 82 mm Diameter in front bearing: 180 mm Counter spindle: - clamping chuck diameter: 250-315-400 mm bar material dia.: 92 mm spindle head: Ø 220H5 spindle bore: Ø 118 mm Clamping tube inner diameter: 104 mm Diameter in front bearing: 180 mm Main spindle drives left and right: - power requirement: 45/47 kW speed area: 20 - 3.200 1/min Buckling speed: 650 1/min torque: 650/ 1.080 Nm C-axis speed: 3.200 1/min Torque C-axis: 660 1/min Partial ...
liter capacity: 600 l Pressure of pump: 2 / 3 / 40 bar control: Schütze / Contactors total power requirement: 11 kVA weight of the machine ca.: 450 kg dimensions of the machine ca.: 1,80 x 1,35 x 1,70 m Coolant System INTERLIT (DMG) - BFA 600-A/40/2/3 50/60 HZ - Very good condition - Connected to DMU 50 3rd Edition - Controllable via contactors - Incl. paper belt filter - Number of pumps: 3 - Pump capacity: 0.63 kW, 2,750 rpm (50 Hz), 60 l/min, 20 m 2.89 kW, 3.75 HP, 2,880 rpm (50 Hz), 24/22-30/27 l/min 3.10 kW, 4.20 HP, 2,930 rpm (50 Hz), 160 l/min, 40 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Travel X/Y/Z: 600mm/700mm/800mm, resolution: 0.001mm, input resolution: 0.001mm, positioning tolerance: 0.01mm, feed rate: 15m/min, rapid traverse: 40m/min, speed: 18000rpm, power: 31kW, control: Heidenhain MillPlus. Documentation available. On-site inspection is possible.
GENERAL Project No.: 905817 Quantity: 1 pcs. Manufacturer: DMG MORI Type: MillTap 700 Control: Siemens 840 D solutionline Year of Make: 2020 Condition: Used machine Approx. (hrs): 8038 Spindle Approx (hrs): 1166 Program run approx. (hours): 1389 DESCRIPTION MILLING Travel in X 700 mm Travel in Y 420 mm Travel in Z 380 mm Max. rapid traverse speed in X/Y/Z 60/60/60 m/min Max. acceleration in X/Y/Z 10/10/18 m/s2 Direct displacement measurement system X/Y/Z Tool holder BT 30 Max. speed milling spindle 24000 1/min Max. power at ED 10-40/100% 16.3/6 kW Max torque at ED 10-40/100% 48/30 (78 max) Nm Disc tool magazine 25 stations Chip to chip time 1.7 s Machine table 840x420 mm OTHER EQUIPMENT IR Workpiece Probes Tool measurement by means of a probe Splash protection cladding with fully encapsulated working area Oil/Emulsion Mist Extraction System ...
5-Axis Universal Machining Center DMG Mori ecoMill 50 Control: Heidenhain TNC 620 Year of Make: 2016 Travels: X-axis 500 mm Y-axis 450 mm Z-axis 400 mm B-axis °-5/+110 C-axis °360 Clamping surface rotary axis: Ø 630 x 500 mm Mount: SK 40 Tool Magazine: 32 Slots Speed: 12,000 rpm Accessories - Chip conveyors - 3D Probe Infrared - Table button
CONTROLS CNC controls SIEMENS SOLUTION LINE WORKING RANGE -CUBIC- number of processing axes (excl parallel axes): 3 X-axis travel: 600 mm Y-axis travel: 560 mm Z-axis travel: 510 mm TABLE table surface (left-right): 900 mm table surface (front-back): 560 mm workpiece load (max): 600 kg SPINDLE / HEAD spindle revolutions (min): 20 /min spindle revolutions (max): 12000 /min tool fixture: ISO SK 40 drive power S6 40%: 13 kW drive power S1 100%: 9 kW spindle torque S6 40%: 82 Nm spindle torque S1 100%: 54 Nm AXIS DRIVES traverse velocity X (max): 20000 mm/min traverse velocity Y (max): 20000 mm/min traverse velocity Z (max): 20000 mm/min rapid traverse X: 30000 mm/m ...
CNC Turning/Milling Centers CTX 410 Management Heidenhain Plus IT - 3 cheek chuck - Driven tool stations - Tailstock - Chip conveyors - Coolant tank
CNC Turning/Milling Centers CTX 410 /2 Management Heidenhain Plus IT - 3 cheek chuck - Driven tool stations - Tailstock - Chip conveyors - Coolant tank
An automated pallet handling system DMG Mori for machining centers is available. Pallet positions: 7, max. workpiece weight: 250kg, max. workpiece diameter: 500mm, max. workpiece height: 400mm, pallet change time: under 40s. Documentation available. An on site inspection is possible.
General- Compound slides with turning/milling spindle as integrated spindle motor, with hydr. locking at turning acceptance HSK-63A DIN 69893 - Y-axis ± 125 mm - B-axis ±120° with pneumatic locking - Tools magazin disc with 1x24 positions - Absolute direct gauging system in the X, Y, Z linear axes - Coolant pump 12 bar; 23l/min - Cooling system for spindle motor, turning/milling spindle, B-axis torque motor; Control: CELOS with Siemens 840D sl Operate Working areaSwing diameter over guide ways500 mmTurning diameter500 mmMax. Turning Length1200 mmBar diameter max.75 mmFloor space/WeightDimensions (L x W x H)5,86 x 2,07 x 2,3 mWeight approx.12000 KgTurning-milling spindleSpindle taperHSK-A 63 DIN 69893 Spindle speed-12000 rpmDrive power (100% DC)19 kWDrive power (40% DC)22 kWTorque (100% DC)85 NmTorque (40% DC)120 Nmlocking moment850 NmWork spindle (left)Spindle noseFlat flange Di ...
travel -x axis: 180 mm travel -z axis: 370 mm Total weight, approx.: 65 kg dimensions of the machine ca.: 2,0 x 1,2 x 2,0 m Tool Presetter DMG Microset - ECO 1 The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Inv. Num. : 6136 Type: CTX alpha 500 Producer: DMG Gildemeister Created: 2008 Parameters: Control system: Siemens 840 Switch-on hours: 22803 h Hours: 11505 h Maximum turning length: 500 mm Maximum turning diameter: 200 mm Maximum turning diameter over bed: 500 mm Distance between tips: 780 mm Maximum spindle speed: 6000 1/min Maximum workpiece weight: 45 kg Weight: 4500 kg Equipment: Filtration Bar Feeder CNC Spacesaver SS 2500 (2018)
Technical DataFeed rate longitudinal/transverse/vertical60000/30000/40000 mm/minRapid traverse longitudinal/transverse/vertical60/30/40 m/minGeneralUniversal Milling Machining Centre - Linear pallet changer with 2 pallets - Coolant tank 2,500 lt / 660 gallon - Internal coolant supply 40 bar / 580 psi through spindle centre (AD) - Chip conveyor - Rotating clear-view window - Electronic handwheel; Control: CELOS with Siemens 840D sl Operate Working area 1Longitudinal3400 mmCross3400 mmVertical1600 mmTool changerApplicationUniversal Type of magazineshelf Tool changer planevertical Type of gripperDouble gripper Clamping surface: 2,000 mm x 2,500 mm / 78.7 in x 98.4 in (DIN 55201 - A2) centre bore: d 100 mm H6 / d 4 in H6 level bush: d 25 mm H6 / d 0.9 in H6 Number of T-slots: 1x 22 H7 (alignment groove, table centre) 8x 22 H12 (clamping grooves) Distance betweeUniversal head with controlled ...
Key data: 750 mm, 650 mm, 560 mm
Universal CNC Machining Center Manufacturer: DMG Mori Type DMU75 Monoblock Year of manufacture 2014 IBN 2015 Control Heidenhain iTNC530 Control a 23.075h Engine a 22.287h Program run 12.946h Operating hours 12.891h Travels X/Y/Z 750/650/560mm Table size 800 x 650mm Table load 600kg C-axis b-axis -120° + 120° Tool holder HSK63 60 Compartment Tool Magazine IKZ 40bar Blum Wireless Push Button Electronic Handwheel HR410 Belt filter system 500l Motor power 35kW Torque 130/86/0 Machine is in a used very good condition. Geometrically very good. Without vice, without tool holders
General2-axes universal turning center with driven tools, C-axis and Y-axis; Control: CELOS with Siemens 840D sl Operate Working areaSwing diameter over bed650 mmMax machining diameter320 mmSwing diameter over X linear guideways370 mmClamping chuck Ø210 mmX travel250 mmY travel+/-50 mmZ travel550 mmDistance between spindle noses800 mmMain drive 1Type of main driveAC Drive power (100% DC)13 kWDrive power (40% DC)14 kWSpeed range-5500 rpmTorque (100% DC)171 NmMax. torque (40% DC)192 NmC-Axis Speed100 rpmTorque of C-Axis (holding torque)168 NmWork spindleSpindle noseA2-6 Spindle diametre on front bearing120 mmSpindle bore73 mmBar diameter max.65 mmTool holder 1Number of tool stations12 Number of driven tools12 Speed max.6000 rpmPower max. (40% DC)6,6 kWDMG MORI IoTconnectorIoTconnector connects DMG MORI machines as well as third-party machines with CELOS. Standardized interfaces enable dat ...
This DMG Gildemeister CTX 320 linear was manufactured in 2006. A reliable horizontal turning machine, it offers robust performance for precision machining. Consider the opportunity to buy this DMG Gildemeister CTX 320 horizontal turning machine. Contact us for more information.
This 5-axis DMG MORI Gildemeister CTX 1250 TC was manufactured in 2012, featuring a turning length of 1250 mm and a main spindle speed up to 5000 minâ»Â¹. It includes a Y-axis travel of 100 mm, B-axis ±110°, and a tool magazine with 24 positions. Ideal for complex machining tasks, it also comes equipped with a Siemens SINUMERIK 840D control system. If you are looking to get high-quality turn-mill capabilities, consider the DMG MORI Gildemeister CTX 1250 TC machine we have for sale. Contact us for more information.
This 6-axis Gildemeister DMG GILDEMEISTER SPRINT Linear 65 was manufactured in 2006. A robust CNC Lathe with Linear Technology, it features a maximum turning diameter of 65 mm and length of 600 mm. Equipped with Siemens Sinumerik 840D control, three turrets, and Y-axis capabilities, it ensures precision and flexibility. If you are looking to get high-quality turning capabilities consider the Gildemeister DMG GILDEMEISTER SPRINT Linear 65 machine we have for sale. Contact us for more information about this machine.
This 5-axis DMG CTX Beta 1250 TC turn-mill centre was manufactured in 2010. It features a swing diameter of 500 mm, max turning diameter of 390 mm, and a turning length of 1250 mm. The spindle supports up to 5000 RPM and 34 kW power, complemented by a 24-position tool magazine. Ideal for complex machining tasks, consider the opportunity to buy this DMG CTX Beta 1250 TC turn-mill centre. Contact us for more information about this machine.
This 5-axis DMG DECKEL MAHO DMU 50 eco was manufactured in 2011, offering advanced CNC milling capabilities. Ideal for complex geometries and precision parts, this machine represents a significant asset for enhancing production efficiency. Contact us for more information.
This 3-Axis DMG MORI CLX 450 V4 was manufactured in 2020 and features advanced technology cycles like drilling, threading, and grooving, along with a main spindle speed of 4,000 rpm. Its equipped with a turret that includes 12 driven tools and 6 BT stations, and boasts a direct measurement system in X and Y axis with a Y-axis range of +/- 60mm. Control is managed by the sophisticated SIEMENS 840D. Buy this DMG MORI CLX 450 V4 lathe to leverage its precision capabilities. For further details, please contact us.
This lathe was manufactured in 2017. The DMG MORI WASINO G 100 | 300 features a maximum turning diameter of 285 mm and a standard diameter of 60 mm. It supports bar work up to 38.1 mm and offers rapid traverse rates of 12000 mm/min on the X-axis and 20000 mm/min on the Z-axis. With a spindle speed up to 6000 minâ»Â¹, this machine is ideal for efficient operations. For more information about this lathe, please reach out to us.
This 5-axis DMG MORI HSC 105 universal machining center was manufactured in 2021. It offers advanced capabilities for precision machining. Consider the opportunity to buy this DMG MORI HSC 105 universal machining center. Contact us for more information.
This 7-axis DMG Gildemeister GMX 400 linear was manufactured in 2004, featuring a maximum turning diameter of 640 mm and a turning length of 1,585 mm. It includes a Sinumerik 840D Powerline control, a milling spindle with a max speed of 12,000 rpm, and a tool magazine with up to 120 positions. If you are looking to get high-quality turn-mill capabilities, consider the DMG Gildemeister GMX 400 linear machine we have for sale. Contact us for more information.
This 5-axis DMG DECKEL MAHO DMU 70 eVo was manufactured in 2008. Consider the opportunity to buy this DMG DECKEL MAHO DMU 70 eVo universal machining centre. Contact us for more information.
This 3-axis DMG MORI Gildemeister CTV 250 2nd was manufactured in 2016. Ideal for precision vertical turning, this machine maintains robust construction and reliability. If you are looking to get high-quality turning capabilities, consider the DMG MORI Gildemeister CTV 250 2nd machine we have for sale. Contact us for more information.
CONTROLS CNC controls HEIDENHAIN ITNC 530 WORKING RANGE -CUBIC- number of processing axes (excl parallel axes): 5 X-axis travel: 200 mm Y-axis travel: 200 mm Z-axis travel: 280 mm rotating range A-axis from: -10 ° rotating range A-axis up to: 130 ° rotating range C-axis from: 0 ° rotating range C-axis up to: 360 ° SPINDLE / HEAD spindle revolutions (min): 3000 /min spindle revolutions (max): 42000 /min tool fixture: HSK E32 TOOL MAGAZINE number of positions: 60 ELECTRICAL SPECIFICATIONS mains voltage: 400 V mains frequency: 50 Hz DIMENSIONS / WEIGHTS space requirements -left/right-: 2200 mm space requirements -front/back-: 3700 mm total height: 2400 mm ...
This 9-axis DMG MORI Sprint 50 2T was manufactured in 2018, a robust horizontal turning machine featuring a Siemens 840 D - SL control panel. It boasts a chuck mount and self-centering diameter of 140 mm, with a maximum spindle speed of 7,000 rpm. Ideal for complex machining tasks, it offers extensive travel and acceleration capabilities across multiple axes. If you are looking to get high-quality turning capabilities consider the DMG MORI Sprint 50 2T machine we have for sale. Contact us for more information.
This DMG MORI CTX Beta 800 4a was manufactured in 2014. It features a Siemens 840 D control system, a counter spindle, and a bar machine package for enhanced versatility. The machine includes a 980-liter coolant system and a hinge type conveyor for efficient operation. If you are looking to get high-quality turning and milling capabilities, consider the DMG MORI CTX Beta 800 4a machine we have for sale. Contact us for more information about this machine.
Fabricante DMG Modelo DMU 125 P hy-dyn Año 2001 CNC HEIDENHAIN TNC 430D Mesa Dimensiones de la mesa 1.250 x 1.000 mm. Peso máximo permitido sobre mesa 2.000 kg. Recorridos y avances Cursos longitudinal, transversal y vertical (Ejes X/Y/Z) 1.250/880/800 mm. Rotación de mesa (Eje C) 0,001 º (Continuo) Avance rápido de los Ejes 30.000 mm/min Cabezal Tipo Automático Horizontal / Vertical Posicionamiento cabezal (Eje A) 0,001 º (Continuo) Cono husillo SK-40 DIN 69871 Gama de revoluciones 20-18.000 rpm Potencia motor principal 37 kW Equipamiento Cargador automático de herramientas INCLUIDO N.º de herramientas del cargador 30 Refrigeración interna 40 bar INCLUIDO Reglas Ópticas HEIDENHAIN INCLUIDO Transportador de Viruta INCLUIDO Volante Portátil HEIDENHAIN HR-410 INCLUIDO Otros Peso Neto 13.000 kg.
This 3-axis DMG CLX 450 V6 was manufactured in 2022. It features a Siemens 840D SL control, a main spindle with a maximum speed of 4000 rpm, and a counter-spindle reaching 5000 rpm. The machine includes a 12-position servo turret with driven tool stations and a Y-axis stroke of ±60 mm. If you are looking to get high-quality turning capabilities, consider the DMG CLX 450 V6 machine we have for sale. Contact us for more information.
Key data: 700 mm, 420 mm, 380 mm
Highly Dynamic Vertical Drilling and Tapping Center / 5-Axis Vertical CNC Machining Center DMG Mori DMP 70 With maximum milling performance Year of construction 2023 Siemens 840D solutionline 2-axis NC rotary and swivel table C-axis 360° torque motor C-axis 360° A-axis -120°/+100° Table diameter 290 mm Table load max. 100 kg X = 700 mm Y = 420 mm Z = 380 mm Feeds and rapid traverses X,Y,Z up to 60,000 mm/min. Spindle holder BBT 30 BIG PLUS Spindle drive power 4/6/20 kW Spindle speeds max. 24,000 rpm. Spindle torque max. 40 Nm 25 tool magazine slots Equipped with: Swivel Joint - Deh Feedthroughs with 4 Channels Software package Job Shop and Sinumerik MDynamics 5-axis Data storage expansion 6 GB flash card ShopMill Chip conveyor Paper filter for coolant Spindle cooling 40 bar Workpiece measuring system BLUM TC52 BLUM Z-Nano for ...
maximum number of results exceeded
please refine your search
