dmc 80 used for sale

Manufacturer: DMC, Type: Unisand K USK 1350 M3, Year: 2011, Software: DMC, Monting of the machine: Walze/Walze/Schuh, Sanding width mm: 1350, Number of sanding belts: 3, Rubber roller: 2, Längsschleifaggregate: 3, Weight in kg: 5350, Year :2011

DMC DL 8T 2 axis cnc lathe Fanuc control unit Swing over Bed(Max. wing dia.): 480 mm Max. Turning Dia.: 280 mm Machine is in excellent condition

Manufacturer: DMC Breitbandschleifmaschine, Type: Topsand, Year: 1994, Monting of the machine: Walze/Schuh/Schuh/Bürste, Sanding width mm: 1300, Sanding hight mm: 120, Number of sanding belts: 3, Sanding belt dimensions: 2620 X 1350, Rubber roller: 1, Shore roller 1: ca.85, Längsschleifaggregate: 22,5, Belt 2 shoe unit: 15, Belt 2 synchronous and reverse run: 15, Belt 4 pressure segment belt: no, Combi unit roller/shoe: 8-25, Table hight adjustment by engine: ca.5, Abrasive belts at bottom: yes, Intermediate sanding of lacquer: yes, Programmanwahl extern: Struckturbürste von unten, Vacuum table: Bürste, Pressure pads for short workpieces: 180, Segment sanding shoe: von Unten, Year :1994

Manufacturer: DMC, Type: UNISAND K/USK1100M3, Year: 2007, Monting of the machine: L/L/L , Equipment of machine 2: L/L/L, Double sided sanding line: yes, Sanding width mm: 1100, Number of sanding belts: 3 + 3, Weight in kg: 4050, Year :2007

Manufacturer: DMC, Type: Topsand, Monting of the machine: Walze/Walze/Schuh/Bürste, Sanding width mm: 1300, Sanding hight mm: 120, Number of sanding belts: 3, Sanding belt dimensions: 2620 X 1350, Rubber roller: 1, Steel roller: 1, Shore roller 2: 70, Längsschleifaggregate: ca.30, Belt 2 shoe unit: 22, Belt 2 synchronous and reverse run: 17, Combi unit roller/shoe: 5-25, Table hight adjustment by engine: ca.2, Abrasive belts at bottom: yes, Intermediate sanding of lacquer: yes, Vacuum table: yes,

Manufacturer: DMC, Type: Masterbrush S 1350 DBB, Year: 2017, Number of units: 2+1, Working widht mm: 1350, Through running hight max mm: 3-200 mm, Diameter of brushes: 300 mm, Through running hight max mm: 3-200 mm, Feeding speed continous adjustable: 2-16 m/min, Year :2016

SECOND-HAND TOP AND BOTTOM WIDE BELT SANDER DMC MOD. UNISAND 2000-I M3 - CE RULES - bottom machine: steel roller diam. 250 mmm. - motor 25 kw rubber roller diam. 320 mm. - motor 18.5 kw rubber roller diam. 320 mm. - motor 15 Kw pressers shoes on/off - top machine: steel roller diam. 250 mmm. - motor 25 kw rubber roller diam. 320 mm. - motor 18.5 kw rubber roller diam. 320 mm. - motor 15 Kw pressers shoes on/off - working widht mm. 1350 mm. - control panel - vacuum - s/n SA/004163 - year 2000

– Italian production – transverse aggregate, the so-called sergeant – year of manufacture 2011 – electric and pneumatic ionizer TECHNICAL PARAMETERS: grinding width 1350 mm grinding height 4-170 mm minimum element length 365 mm vacuum table 1 unit: transverse tape, the so-called sergeant engine power 12 kW 2 aggregate: rubber shaft hardness 95 shore diameter 240 mm engine power 18.5 kW 3 aggregate: rubber shaft hardness 55 shore shaft diameter 300 mm engine power 15 kW 4 aggregate: pneumatic shoe engine power 15 kW 5 unit – cleaning brush 2.2 kW 6 aggregate – blowing blowing on the tape pneumatic oscillation feed speed 2,5 - 18 m/min pneumatic tape tension electric height adjustment connection diameter 3 x 200 mm, 8 x 80 mm, 2 x 160 mm, 1 x 150 mm transport dimensions (L/W/H) 370 / 250 / 250 cm weig ...

– after technical inspection TECHNICAL PARAMETERS: .max. workpiece width 110 cm .max. workpiece height 16 cm 2 aggregates: 1) AGGREGATE RUBBER roller 2) aggregate with combo boot with pneumatic pressure rollers, rubber, pressure between aggregates oscillation of pneumatic tapes automatic belt centering system potentiometer for setting the planing thickness FEED SPEED SMOOTHLY ADJUSTABLE power of the first unit 18,5 kW power of the second unit 11 kW working pressure 6-8 bar extraction connection diameter 2 x 250 mm dimensions (L/W/H) 195 / 185 / 215 cm weight 1750 kg

x-travel: 600 mm y-travel: 560 mm z-travel: 560 mm B-axis (table): 360 mm Control: Siemens 840D total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Control: iTNC 530 Max.travel range: X 765 mm Y 460 mm Z 560 mm B +30? / -120? C nx 360? Clamping table: 630 x 500 mm Spindle speed ? 12000 rpm Taper ? HSK 63 Tool changer ? 120 positon Twin Pallets Coolant tank:2500l With spindle cooling, mea

Control: Mill plus Max.travel range: X 765 mm Y 460 mm Z 560 mm B +30? / -120? C nx 360? Clamping table: 630 x 500 mm Spindle speed ? 12000 rpm Taper ? HSK 63 Tool changer ? 120 positon Four Pallets Coolant tank:2500l machine has spindle cool

Description: Max. machining width 1350 mm Min. machining thickness 4 mm Max. machining thickness 200 mm Forward feed belt , with speed adjustment by NC Motor power 4 KW Fan for belt vacuum hold down , no. fans 1 Operating units 5 OPERATING UNITS 1 Unit : sander unit : band OPERATING UNITS 2 Unit : roller unit : in rubber roller diameter : 320 mm motor power : 15 KW sanding belt width : 1370 sanding belt extension : 2620 OPERATING UNITS 3 Unit : pad Pad : vertical Segmented pad : , With superfinishing belt , with adjustable speed by NC , motor power : 15 KW sanding belt width : 1370 sanding belt extension : 2620 OPERATING UNITS 4 Unit : brush unit : top brush diameter : 200 OPERATING UNITS 5 Unit : blowers Control system HYDRA PC Approx. Onsite Dimension. (l x w x h): 1 x 1 x 1 mm, weight approx.: 1 kg

Description: serial number: SA/004186 Technical specifications: sanding width approx. 1350 mm workpiece thickness from 4 mm up to 170 mm vacuum transport belt, vacuum unit power 7,5 kW belt conveyor with variable feed speed: 3,5-18 m/min feed motor power 2,2 kW aggregate 1: longitudinal sanding belt driven by an electronic sectioned pneumatic pad: 46 sectors, sanding belt dimensions 1370 x 2620 mm, motor power 15 kW variable sanding belt speed: max 18 m/sec aggregate 2: longitudinal sanding belt driven by an electronic sectioned pneumatic pad: 46 sectors, sanding belt dimensions 1370 x 2620 mm, motor power 15 kW variable sanding belt speed: max 18 m/sec aggregate 3: longitudinal sanding belt driven by an electronic sectioned pneumatic pad: 46 sectors, sanding belt dimensions 1370 x 2620 mm, motor power 15 kW variable sanding belt speed: max 18 m/sec aggregate 4: antista ...

Description: • Varnish Wide belt sanding machine • Serial number SA/003641 • Total installed power approx. 23 KW • Sanding width 1100 mm • Workpiece thickness up to approx. 170 mm • Motorized height positioning with digital reader • Vacuum transport belt, F.LLI FERRARI vacuum unit with motor power 4 KW • Feed motor power 1.50 KW • Aggregate 1: grooved rubber sanding roller, with blowers • Aggregate 2: sanding pad, with blowers • Both groups are driven by an 15 KW motor Approx. Onsite Dimension. (l x w x h): 2,000 x 1,850 x 2,450 mm, weight approx.: 2,300 kg

Description: • Wide belt sanding machine • Serial number SA/003937 • Sanding width approx. 1350 mm • Workpiece thickness from 4 mm up to 170 mm • Vacuum transport belt, F.LLI FERRARI vacuum unit power 11 KW • Belt conveyor with variable feed speed • Feed motor power 4 KW • Aggregate 1: EPICS TA-46 transversal sanding belt driven by an electronic sectioned pneumatic pad: 46 sectors, sanding belt dimensions 6550 x 150 mm, motor power 11 KW • Aggregate 2: EPICS K-RP 46 combined roller and sanding pad aggregate: roller diameter 220 mm, 46 sectors,sanding belt dimensions 2620 x 1370 mm, motor power 18.50 KW, with blowers • Aggregate 3: EPICS PE-46 electronic sectioned sanding pad: 46 sectors, sanding belt dimensions 2620 x 1370 mm, motor power 15 KW, with blowers • Aggregate 4: brush unit • HYDRA RTC electronic management control, Windows environment • Dimensions for ...

article nr.: 90045-0395 Digital Motor Controller (DMC) Servo Amplifier DMC 50720P AC E-372 for Tetra Pak PT 8 Pull Tab Applicator 8

Item nr.: 90045-0394 Servo Card DMC-50720 E for PT 8 Tetra Pak Pull Tab Applicator

DMC Deckel Maho 50H Horizontal Machining Center Double Pallet/Pallet changer Control Unit: Siemens 840D X: 560 mm Y: 510 mm Z: 560 mm B: 360° Spindle speed: 18.000 rpm Table size: 400 mm x 400 mm Tool changer: 60 position Chip conveyor

Medical sterilizer For decontamination of various materials, including liquids in sealed bottles. It is built between two rooms in one wall. Cabinet and through execution. The internal dimensions of the camera are 672 x 672 x 600 (W x H x D). The volume of the camera is 300 liters. The software combination L 3203 is designed to sterilize dishes, textiles, rubber plugs, filters and liquids in closed or ventilated rigid containers. All processes in this combination are designed to retain and disinfect wastewater from the sterilizer. The parameters for each process can be adjusted and stored in memory for the respective program. Vertically sliding doors with a lock when an obstacle occurs. Microcomputer-based PACS 3500 control unit. Russified display. Avanti control panel (8.4 color, touch / touch screen) on the loading and unloading side. A tight seal to prevent contamination - o ...

Cat. No. 11-3600-6 new Storage Vessels / Stackable Tanks in AISI 304 with Cooling Jacket 800 + 800 Litres Standard Equipment: 3 Feet Level Indicator Tank Inlet on the Top NW 50 Diameter 920 mm Bottom and Top in Conical Shape Surface: inside IIID and outside marbled Discharge Outlet NW 50 Connection for Clap DN 50 Manhole on the front in oval shape 300 x 435 mm – pressed-in Volume: on the ground: 800 litres on the top: 800 litres Height on the ground: 1835 mm Height on the top: 1550 mm Total height: 3385 mm Surcharges/unit: Butterfly Valve DN 50 Clap Gr.37 Tapping Pipe for Clap Gr. 37 with Butterfly Valve NW 40=Clear Discharge Sample Valve Mixer 0,37 kW, 400 V, 1370 rev/min with connector for Clap size 37 For more Information please contact us under: Phone +49(0)9353-909050 Fax: 09353-9090522, Mobile: ...

Robust fine rolling mill with 800 mm roll width and 800 mm roll diameter, incl. main drives, auxiliary drives, control cabinet and hydraulic unit for splitting. In regularly maintained condition, rollers without riefen. Available for an extra charge: Matching dust filter from Hellmich.

Fine rolling mill with 800 mm roll width and 800 mm roll diameter, incl. main drives and auxiliary drives, split adjustment manually. In regularly maintained condition, rollers without riefen. Available for an extra charge: Matching dust filter from Hellmich.

Roller crusher with 800 mm roller width and 800 mm roller diameter, incl. roller drives, auxiliary drives, switch box and hydraulics power pack for gap adjustment. In regularly maintained condition, rollers without ridges. Available at extra charge: Suitable dust filter by Hellmich.

Roller crusher with 800 mm roller width and 800 mm roller diameter, incl. main roller drives and auxiliary drives, manual gap adjustment. In regularly maintained condition, rollers without ridges. Available at extra charge: Suitable dust filter by Hellmich.

Welding table, straightening table, straightening flap, work table, clamping table measuring plate, lapping and control plate PAGUS working surface: 800 x 800 mm working height: 100 mm Dimensions: 800 x 800 x 100 mm

Clamping table PAGUS Clamping area: 800 x 800 mm 8 grooves Groove width: 18 x 31 mm center groove: 28 x 9 mm bore: 32 mm 32 mm deep (not rotatable, counterpart missing) used, tested ! Dimensions: 800 x 800 x 220 mm

Seal kit flap / KPL XOMOX CRANE 750 - 800/10, 800 - 81 for high-performance butterfly and control valve type 800 nominal diameter: DN 750 - 800 Pressure rating: PN 10 seat material: Firesafe Shaft seal: Graphite New ! Dimensions ( packaging ): 960 x 960 x 50 mm

S/s smoke trolley, dimensions: 800 mm x 800 mm x 1800 mm.

Technische Daten: - Rollendurchmesser    800 mm - Schnitthöhe         max. 400 mm - Arbeitsstisch    1290 x 800 mm - min. Lamellenstärke        2 mm - Tolleranz                  +/- 0,15 mm - Sägebandbreite max. 54 x 0,9 mm - Sägebandlänge min./max. 5530/5380 mm - Motorleistung 15 kW - Spannung 400 V, 50 Hz - Motorleistung Vorschub 0,37 kW - Höhe des Vorschubtteppisch 300 mm - Anschlaglänge des Vorschubteppisch 750 mm - Andruckrollen Durchmesser 160 mm - Durchlassbreite vom Vorschubteppich zum Sägeband 200 mm - Durchlassbreite vom Sägeband zu den Andruckrollen 200 mm - stufenlose Vorschubgeschwindigkeit  0-30 m/min. - manuelle Anschlagpositionierung mit digitaler Anzeige - automatische Stern-Dreieck Schaltung - Radbremsung pneumatisch - obere und untere Sägebandführung - obere Sägebandführung verstellbar über Zahnstange - automatische  ...

Technische Daten: - Schnittbreite 800 mm - Schnitthöhe 470 mm - Sägebandlänge 5611 x 19-50 mm - Schnittgeschwindigkeit 20 m/s - Tischabmessung 900 x 700 mm - Tischhöhe 930 mm - Sägetischneigung -5C bis +45C - Absaugstutzendurchmesser 100 mm - Durchmesser der Laufrollen 810 mm - Motor-Leistung 5,5 kW - Spannung 400 V - Maschinenabmessung (B x T x H) 1300 x 750 x 2506 mm - Transportabmessung L=2500, B=730, H=1280 mm - Gewicht 550 kg komplett mit: - gummierte und präzisionsgelagerte Laufräder ermöglichen geräuscharmen Betrieb - Aluminiumanschlag mit Schnellklemmung - Maßskala am Anschlag mit 2 Lupen zum genauen Ablesen und Einstellen - Schnitthöhenverstellung einfach und schnell über Handrad- Zahnstangenkombination einstellbar - Sägebandbreite von 19 mm bis 50 mm möglich - schrägstellbarer Arbeitstisch von 0C - 45C über Präzisions- Schneckengetriebe - 2 Anschlußmöglichkei ...

Technische Daten: - 8 Aggregate - Arbeitsbreite min./max. 300 - 2500 mm - Arbeitshöhe min./max. 10 - 120 mm - Vorschub stufenlos regelbar 6 - 36 m/min - Motor Vorschub 4,0 kW - Motor Breitenverstellung 0,75 kW - Gesamtanschluss 47,0 kW - Spannung 400 V / 50 Hz - Absaugstutzen FI 8 x 120 mm - PLC + touch screen Steuerung - Transportkette mit Nocken, Abstand 500 mm - Einlauflänge 1500 mm für Paneele / Dielung / Möbelplatten / Türen Vorritzsäge: - Motor 2,2 kW - Drehzahl 3000 Upm. - Sägeblattaufnahme FI 30 mm - Sägeblatt FI min./max. 160 - 200 mm Ablängsäge:(Zerspaner) - Motor 5,5 kW - Drehzahl 3000 Upm. - Sägeblattaufnahme FI 30 mm - Sägeblatt FI min./max. 200 - 300 mm 1. Frässpindel: - Motor 5,5 kW - Drehzahl 7500 Upm. - Frässpindelaufnahme FI 40 mm - Werkzeug FI min./max. 108 - 180 mm - jumping (pneumatisch gesteuertes Ein- und Austauchen) 2. Frässpindel: - Motor 7,5  ...

1X Electrical power (Kw 0.73), Centrifugal force(kg) 680, Sieving decks 1 and sieve area (m2) 0.36

Technische Daten: - Vorschub + Auf / Ab - Sägekopf elektrisch regelbar - 2-teiliger Grundrahmen - Bedienersitz - Wenderollen - Stammspanner - zusätzliche Stammauflagen - Sichtlineal - Kreisskala - mechan. manuell verstellbare Sägeblattführung - max. Stammdurchmesser 800 mm - max. Schnittlänge 11 m - Hauptmotor 10 kW - Vorschubmotor 0,55 / 1,05 kW - Hubmotor 1,1 kW - Sägeband L= 4010 bis 4140 mm, B=30 bis 35 mm -Vorschubgeschwindigkeiten: 1. Stufe: 2,2 bis 4,5 m / min 2. Stufe: 4,5 bis 9,0 m / min 3. Stufe: 7,0 bis 9,0 m / min 4. Stufe: 14,0 bis 28,0 m / min - Gesamtgewicht ca. 1250 kg - Abmessungen L=13,0 m x B=2,05 m x H=1,35 m

Technische Daten: - max. Arbeitsbreite 800 mm - automatischer Arbeitsablauf in X-Achse - Linearführungen in X-Achse mit Staubstutz - manuelle Verstellung der Z-Achse - Magnetspanntisch 120 x 820 mm - Schleifwinkel +/- 90C - Drehzahl Schleifscheibe 2800 U/min - Schleifscheiben FI 150 x 60 x 32 mm - Vorschubgeschwindigkeit 0-10 m/min - Motor 1,5 kW / 400 V - Motor Vorschub 60 W - Motor Kühlmittelpumpe 40 W - Kühlmitteleinrichtung verhindert ein Überhitzen der Messer - Halogenlampe mit verstellbarer Halterung - Gleitmittelpumpe mit Zentralschmierung - Abmessungen L=1700, B=900 mm, H=1350 - Gewicht 300 kg

We have for sale: 1 Holec SVS switchgeaar 17,5kV 800Amp busbar 3 motorized breaker feeders with Stucke protection relays 1 x fused loadbreak switch

1 mixing arm with bottom discharge screw all stainless steel right-left turn 1 speed dimensions (l x w x h) : ± 2.500 x 1.050 x 1.700 mm with new control box + control (Siemens logo) all new cables

Cell wheel lock made of noble steel unused KREISEL Environmental Technology Type: ADG 630 x 800 x 21-24 Z Built: 2005 Inlet opening: approx. 800 x 500 mm Outlet opening: approx. 800 x 500 mm Cell wheel diameter: 630 mm Number of cells: 12 Cell depth: approx. 200 mm Cell wheel made of stainless steel Housing made of steel Geared motor : SEW-EURODRIVE Type :RF107 AR132S/MWEX/II3GD DV132M4/TFII36D 7.5 kW 24 rpm 230/400 V IP65 Motor Ex protected! Total dimensions: approx. 2700 x 800 x 800 mm

For sale we offer new scissor roller conveyor. Roll width 610mm Length retracted 3000mm Length extended 8000mm Height 690-1000mm Load capacity 130kg/m Available quantity: 2 pieces Other lengths available in stock: 4 and 10m Shipping worldwide Price per piece 6.700€ net plus VAT If you are interested, please contact us to confirm availability.

For sale we offer new scissor roller conveyor. Roll width 760mm Length retracted 3000mm Length extended 8000mm Height 690-1000mm Load capacity 130kg/m Quantity available: 1 piece Other lengths available in stock: 4 and 10m Shipping worldwide Price per piece 7.100€ net plus VAT If you are interested, please contact us to confirm availability.

Laser heater Qlima SRE 8040 TC silver Only 8 pcs available Stock clearance This powerful SRE 8040 TC laser heater brings a lot of heat into your home. The integrated digital display makes it easy to select the desired temperature or function. The built-in thermostat adjusts the power according to the set temperature. In addition, the SRE 8040 TC is equipped with most standard functionalities such as a day timer and fuzzy logic. Thanks to the "Fuzzy Logic" of the Qlima SRE 8040 TC, the room has the preset temperature at the desired time. This laser emitter is also equipped with an automatic burn time extension. When the fuel runs low, the device automatically switches to a lower combustion level, so that the refilling of the fuel is postponed for some time. The lasers from Qlima, full of technical ingenuity! The heater comes with a handy fuel siphon pump. Fuel When choos ...

Used machine in good condition. Available for immediate delivery. - Screw diameter: 90 mm - Injection pressure: 1.919 bar - Injection volume: 2.740 cm? - Screw L/D ratio: 20 - Ejector stroke / force max.: 300 / - mm / kN - Clamping force: 8000 kN - Mould opening stroke max: 1.350 mm - Mould height max: 2.000 mm - Mould height min: 650 mm - Platen size (h x v): 1.570 x 1.480 mm - Distance between tie-bars (h x v): 1.025 x 935 mm - Core pulls: 5 - Operating hours: 62.870 - Dimensions (long x wide x high): 10.085 x 5.300 x 2.120 mm - Weight: 38.000 kg

Sinumerik 805 SM-TW with plug-in cards, New!, New, Siemens, new As good as new in original packaging! The high quality part comes from a spare parts warehouse of a mechanical processing of a large car manufacturer, is completely as new and in the original packaging. Sinumerik 805 SM-TW, consisting of: 1 piece Sinumerik basic rack, 805 SM-TW, 6FM2805-1WB00, 1 piece battery plug-in unit 6FX1410-0CX46 1 piece Sinumerik power supply, 6EW1861-3BA, 1 piece Sinumerik CPU, 6FX1138-5BB04, 1 piece Sinumerik basic memory module, without RAM, 6FX1128-1BA00, 1 piece Sinumerik 805 SM T/W software, 6FX1882-0BX22-4D, 1 piece Sinumerik 805 SM T/W basic software module 1, 6FX1882-0BX01-4D, Attention: All parts are new! These prices are absolute best prices and are only valid for the purchase of the whole position. We also sell the parts individually, see separate Ebay listings. Func ...

Glass scale, glass measuring stick, scale, digital display, measuring stick, length measuring system, length measuring device, linear scale, position indicator, digital scales, digital scale for digital display, linear encoder, displacement transducer -Manufacturer: Sfernice, linear displacement transducer -Measured length: 800 mm -Dimensions: 1000/35 / H60 mm -Weight: 1.3 kg

Height indicator, parallel indicator -Max. Working height: 800 mm -Price: per piece -Number: 2 pieces -Dimensions: 380/90/H855 mm -Weight: 7.5 kg

Inert gas welding machine, inert gas welding machine, arc welding system, MIG/MAG welding system -Max. Welding power: 800 A -with pulse function -4-roller drive -Water cooled -Incl. Ground cable -with: removable wire feeder -Gas fitting -Hose package 4 m -Quantity: 1x device available -Dimensions: 500/1010/H1600 mm -Weight: 162kg

Description: The rope hoist is supplied as standard with: Bracket for suspension Remote control with up / down. Emergency stop. Load capacity in kg 800/400 kg Stroke 6/12 mm Lifting speed 5/8 m / min Power 1.25 kw Connection voltage 230 V. Weight 21 kg Dimensions L x W x H 420 x 180 x 280 mm Approx. Onsite Dimension. (l x w x h): 420 x 180 x 280 mm, weight approx.: 21 kg

Kat-No 10-1750 in very good condition With connection socket at the top With manhole lid front 400x300 mm With tasting tap connection With 2 x threaded connection connector at the front With conical floor with residual outlet DN 65 With 3 transport eyelets With bracket for riser pipe Height-adjustable on 4 calotte feet Dimensions: Total height: 4300 mm Body height: 3160 mm Diameter: 1800 mm For back-up questions: Tel: 09353 90905-0 or Fax: 09353 90905-22 Mobile: 0171 651 82 48 We also have other items (new or used), tanks, pumps, filters, beverage and food technology, brewery, distillery and much more - Please request our complete catalogue! All prices are ex works plus law VAT. Intermediate sale reserved! Freight cost share: by scope of delivery Visit also in the evening or on weekends by appointment.

Kat. No. 09-1049-2 in a very good condition standard equipment: material: V2A (AISI 304) 1.4301 with chill coat 600 mms wide with entrance 1 AG with manhole on top m.6 screws DN 50 and DN 25 with outlet DN 50 - exit 1 ? AG with conical subsoil resistant to pressure 1.5 cash DxH: 1050 x 1,050 mms of weight: 106 kg surcharges: fermentation connector DN 50 fermentation lock sample valve CIP cleaning blind cap DN 50 temperature control unit The price is for one tank. For more Information please contact us under: Phone +49(0)9353-909050 Fax: 09353-9090522, Mobile: 0171-6518248 Subject to prior sale. All prices are valid Ex-Works, excl.VAT. Freight Charges: depending on dimensions and destination.

Kat. No. 09-1590-2 new standard equipment: With rest outlet with sloping seat discs valve DN 50 With cylindrical conical ground below and on top Test pressure: 1.5 cash – admitted working pressure: 0.49 bar Material V2A AISI 304 - surface inside and outside IIIC With manhole DN 400 m. 6 screws, Ueberdruckventil thread connection carbines DN 25 and with sloping seat discs valve DN 25 Kat. No. contents: Diameter: G flat height: Weight: 09-1590-2 800 litres 1,000 mms 1,550 mms 89 kg upon request: CIP Cleaning Connector fermentation fittings Fermentation lock DN 50 Sample Valve For more Information please contact us under: Phone +49(0)9353-909050 Fax: 09353-9090522, Mobile: 0171-6518248 Subject to prior sale. All prices are valid Ex-Works, excl.VAT. Freight Charges: depending on dimensions and destination.