We use cookies to optimize our website for you and to be able to continuously improve it. By continuing to browse the site you are agreeing to our use of cookies.
Disagree
meta name="robots" content="all">
120,093 used machines on RESALE, but how to find them? Machine Search
used
– Italian production – transverse aggregate, the so-called sergeant – year of manufacture 2011 – electric and pneumatic ionizer TECHNICAL PARAMETERS: grinding width 1350 mm grinding height 4-170 mm minimum element length 365 mm vacuum table 1 unit: transverse tape, the so-called sergeant engine power 12 kW 2 aggregate: rubber shaft hardness 95 shore diameter 240 mm engine power 18.5 kW 3 aggregate: rubber shaft hardness 55 shore shaft diameter 300 mm engine power 15 kW 4 aggregate: pneumatic shoe engine power 15 kW 5 unit – cleaning brush 2.2 kW 6 aggregate – blowing blowing on the tape pneumatic oscillation feed speed 2,5 - 18 m/min pneumatic tape tension electric height adjustment connection diameter 3 x 200 mm, 8 x 80 mm, 2 x 160 mm, 1 x 150 mm transport dimensions (L/W/H) 370 / 250 / 250 cm weig ...
used
DMC DL 8T 2 axis cnc lathe Fanuc control unit Swing over Bed(Max. wing dia.): 480 mm Max. Turning Dia.: 280 mm Machine is in excellent condition
used
– after technical inspection TECHNICAL PARAMETERS: .max. workpiece width 110 cm .max. workpiece height 16 cm 2 aggregates: 1) AGGREGATE RUBBER roller 2) aggregate with combo boot with pneumatic pressure rollers, rubber, pressure between aggregates oscillation of pneumatic tapes automatic belt centering system potentiometer for setting the planing thickness FEED SPEED SMOOTHLY ADJUSTABLE power of the first unit 18,5 kW power of the second unit 11 kW working pressure 6-8 bar extraction connection diameter 2 x 250 mm dimensions (L/W/H) 195 / 185 / 215 cm weight 1750 kg
used
x-travel: 600 mm y-travel: 560 mm z-travel: 560 mm B-axis (table): 360 mm Control: Siemens 840D total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
used
Manufacturer: DMC, Type: Unisand K USK 1350 M3, Year: 2011, Software: DMC, Monting of the machine: Walze/Walze/Schuh, Sanding width mm: 1350, Number of sanding belts: 3, Rubber roller: 2, Längsschleifaggregate: 3, Weight in kg: 5350, Year :2011
used
Manufacturer: DMC Breitbandschleifmaschine, Type: Topsand, Year: 1994, Monting of the machine: Walze/Schuh/Schuh/Bürste, Sanding width mm: 1300, Sanding hight mm: 120, Number of sanding belts: 3, Sanding belt dimensions: 2620 X 1350, Rubber roller: 1, Shore roller 1: ca.85, Längsschleifaggregate: 22,5, Belt 2 shoe unit: 15, Belt 2 synchronous and reverse run: 15, Belt 4 pressure segment belt: no, Combi unit roller/shoe: 8-25, Table hight adjustment by engine: ca.5, Abrasive belts at bottom: yes, Intermediate sanding of lacquer: yes, Programmanwahl extern: Struckturbürste von unten, Vacuum table: Bürste, Pressure pads for short workpieces: 180, Segment sanding shoe: von Unten, Year :1994
used
Manufacturer: DMC, Type: UNISAND K/USK1100M3, Year: 2007, Monting of the machine: L/L/L , Equipment of machine 2: L/L/L, Double sided sanding line: yes, Sanding width mm: 1100, Number of sanding belts: 3 + 3, Weight in kg: 4050, Year :2007
Manufacturer: DMC, Type: Topsand, Monting of the machine: Walze/Walze/Schuh/Bürste, Sanding width mm: 1300, Sanding hight mm: 120, Number of sanding belts: 3, Sanding belt dimensions: 2620 X 1350, Rubber roller: 1, Steel roller: 1, Shore roller 2: 70, Längsschleifaggregate: ca.30, Belt 2 shoe unit: 22, Belt 2 synchronous and reverse run: 17, Combi unit roller/shoe: 5-25, Table hight adjustment by engine: ca.2, Abrasive belts at bottom: yes, Intermediate sanding of lacquer: yes, Vacuum table: yes,
used
Manufacturer: DMC, Type: Masterbrush S 1350 DBB, Year: 2017, Number of units: 2+1, Working widht mm: 1350, Through running hight max mm: 3-200 mm, Diameter of brushes: 300 mm, Through running hight max mm: 3-200 mm, Feeding speed continous adjustable: 2-16 m/min, Year :2016
used
Control: iTNC 530 Max.travel range: X 765 mm Y 460 mm Z 560 mm B +30? / -120? C nx 360? Clamping table: 630 x 500 mm Spindle speed ? 12000 rpm Taper ? HSK 63 Tool changer ? 120 positon Twin Pallets Coolant tank:2500l With spindle cooling, mea
used
Control: Mill plus Max.travel range: X 765 mm Y 460 mm Z 560 mm B +30? / -120? C nx 360? Clamping table: 630 x 500 mm Spindle speed ? 12000 rpm Taper ? HSK 63 Tool changer ? 120 positon Four Pallets Coolant tank:2500l machine has spindle cool
used
SECOND-HAND TOP AND BOTTOM WIDE BELT SANDER DMC MOD. UNISAND 2000-I M3 - CE RULES - bottom machine: steel roller diam. 250 mmm. - motor 25 kw rubber roller diam. 320 mm. - motor 18.5 kw rubber roller diam. 320 mm. - motor 15 Kw pressers shoes on/off - top machine: steel roller diam. 250 mmm. - motor 25 kw rubber roller diam. 320 mm. - motor 18.5 kw rubber roller diam. 320 mm. - motor 15 Kw pressers shoes on/off - working widht mm. 1350 mm. - control panel - vacuum - s/n SA/004163 - year 2000
used
Description: Max. machining width 1350 mm Min. machining thickness 4 mm Max. machining thickness 200 mm Forward feed belt , with speed adjustment by NC Motor power 4 KW Fan for belt vacuum hold down , no. fans 1 Operating units 5 OPERATING UNITS 1 Unit : sander unit : band OPERATING UNITS 2 Unit : roller unit : in rubber roller diameter : 320 mm motor power : 15 KW sanding belt width : 1370 sanding belt extension : 2620 OPERATING UNITS 3 Unit : pad Pad : vertical Segmented pad : , With superfinishing belt , with adjustable speed by NC , motor power : 15 KW sanding belt width : 1370 sanding belt extension : 2620 OPERATING UNITS 4 Unit : brush unit : top brush diameter : 200 OPERATING UNITS 5 Unit : blowers Control system HYDRA PC Approx. Onsite Dimension. (l x w x h): 1 x 1 x 1 mm, weight approx.: 1 kg
used
Rubber band, gasket for tape measure HEIDENHAIN LB 301 ( LB301 ) 285 635-42 7 994 522 length: 4300 mm width: 25 mm as good as new ! Dimensions ( packaging ): 210 x 210 x 25 mm
used
Chip extraction, industrial vacuum cleaner NILFISK GB 635 50 STB -U- with stainless steel container for chip extraction 380 V without hoses used, checked ! Dimensions: 1100 x 700 x 1000 mm
used
Perforated plate RAU Dimensions: 890 x 635 x 40 mm ( height x width x depth ) 4-edge system perforation perforation: 10 x 10 mm grid ( distance from the center of the hole to the center of the hole): 38 mm with underlays and fastening material !; New ! Dimensions ( packaging ): 910 x 660 x 50 mm
used
Welding table, straightening table, straightening flap, work table, clamping table straightening plate, straightening table, spotting plate PAGUS Working surface: 640 x 635 mm height: 145 mm used, tested ! Dimensions: 640 x 635 mm x 145 mm
used
Welding table, straightening table, straightening pad, work table, clamping table, straightening plate, straightening table, spotting plate PAGUS Working surface: 640 x 635 mm height: 110 mm used, tested ! Dimensions: 640 x 635 x 110 mm
used
Ruby ball probe, 2 pcs RENISHAW A-5000-6352 ball diameter: Ø 5 mm center switch: N EWL: 26 Bracket material: Stainless steel Overall length: 30 mm Shaft diameter: Ø 3 mm Shaft material: Tungsten carbide Thread: M4 Material of the stylus: Ruby New ! Dimensions (packaging): 77 x 14 x 14 mm
used
FAS conveyor roller curve 90° 635-500 IR850 RA1990 Technical data: Condition: good (used) Engine: fully functional Angle: 90° Inner radius (IR): 850 mm Nominal/outer width (NB): 635 mm roller width (NUB): 500 mm Pitch: 75-125 mm Motor Type: SEW three-phase motor Engine power: kW 0.15 S1 Hz 50 Funding speed: 0.93 m/sec Drive: Center drive usable width: 500mm The rolls are higher than the frame Scope of delivery: without supports (if necessary please enquiries) Optional: supports Price: plus VAT from central warehouse Dr. Sonntag KG 97076 Wuerzburg Features: nominal voltage: 380-500V Running direction: links/ rechts condition: good (used) Nominal / inner radius in mm: 850 Nominal / outside width in mm: 635 Roll width in mm: 500 angle: 90° Driven: YES Engine type: SEW Eurodrive KW: 0,15 Conveyor speed m / s: 0,93 scope of delivery: without supports and side guides Für eine ...
used
PIV chain PIV DRIVES GmbH 635 x 32 mm length: 635 mm width: 32 mm bolt width: 38 mm New ! Dimensions ( packaging ): 105 x 100 x 40 mm
new
Item nr.: 90045-0394 Servo Card DMC-50720 E for PT 8 Tetra Pak Pull Tab Applicator
new
article nr.: 90045-0395 Digital Motor Controller (DMC) Servo Amplifier DMC 50720P AC E-372 for Tetra Pak PT 8 Pull Tab Applicator 8
used
DMC Deckel Maho 50H Horizontal Machining Center Double Pallet/Pallet changer Control Unit: Siemens 840D X: 560 mm Y: 510 mm Z: 560 mm B: 360° Spindle speed: 18.000 rpm Table size: 400 mm x 400 mm Tool changer: 60 position Chip conveyor
used
Medical sterilizer For decontamination of various materials, including liquids in sealed bottles. It is built between two rooms in one wall. Cabinet and through execution. The internal dimensions of the camera are 672 x 672 x 600 (W x H x D). The volume of the camera is 300 liters. The software combination L 3203 is designed to sterilize dishes, textiles, rubber plugs, filters and liquids in closed or ventilated rigid containers. All processes in this combination are designed to retain and disinfect wastewater from the sterilizer. The parameters for each process can be adjusted and stored in memory for the respective program. Vertically sliding doors with a lock when an obstacle occurs. Microcomputer-based PACS 3500 control unit. Russified display. Avanti control panel (8.4 color, touch / touch screen) on the loading and unloading side. A tight seal to prevent contamination - o ...
used
x-travel: 635 mm y-travel: 510 mm z-travel: 460 mm control: 840D ShopMill Siemens Main spindle:: turning speed range - main spindle: 20 - 12.000 min/-1 power capacity - main spindel: 18,9 / 14 kW tool taper: SK 40 DIN 69871 max. Torque: 100 / 74 Nm tension force: 8 kN work table:: table surface area: 790 x 560 mm number of T-slots: 4 + 1 T-slot - distance: 100 mm T-slot - width: 4x 14H12 / 1x 14H7 mm max. table load: 600 kg table height over floor: 720 mm distance spindle nose and table: 120 - 580 mm Tool-Presetter:: number of toolpositions: 30 pos. Max. mould width: 80 / (130) mm max. tool length: 250 mm max. tool weight: 6 kg max. total weight: 80 kg change-time tool to tool: 1,6 sec change-time chip to chip: 6,0 sec feeds:: rapid traverse: 30 m/min feed speeds: max. 20.000 mm/min Feed force: max. 5 kN total power requirement: 21 kVA weight of the machine ca.: 5,0 t dimensions of t ...
used
x-travel: 635 mm y-travel: 510 mm z-travel: 460 mm control: 840 D sl ShopMill Siemens Main spindle:: turning speed range - main spindle: 20 - 10.000 min/-1 power capacity - main spindel: 13 / 9 kW tool taper: SK 40 max. Torque: 83 / 57 Nm tension force: 8 kN work table:: table surface area: 790 x 560 mm number of T-slots: 4 + 1 T-slot - distance: 100 mm T-slot - width: 4x 14H12 / 1x 14H7 mm max. table load: 600 kg table height over floor: 720 mm distance spindle nose and table: 120 - 580 mm Tool-Presetter:: number of toolpositions: 20 pos. Max. mould width: 80 / (130) mm max. tool length: 250 mm max. tool weight: 6 kg max. total weight: 80 kg change-time tool to tool: 1,6 sec change-time chip to chip: 6,0 sec feeds:: rapid traverse: 30 m/min feed speeds: max. 30.000 mm/min Feed force: max. 5 kN total power requirement: 23 kVA weight of the machine ca.: 4,5 t dimensions of the machine ...
used
CNC Machining Center Vertical DECKEL-MAHO - DMC 635 V Built in 2006 in good condition. Control iTNC 530 Heidenhain Duty Cycle: 35172 Hours: 5903 Specifications: x-travel 635 mm y-travel 510 mm z-travel 460 mm Main Spindle: Speed range - main spindle 20 - 8,000 min/-1 Drive power - main spindle 13 / 9 kW Tool holder SK 40 DIN 69871 Max. torque 83 / 57 Nm Clamping force 8 kN Workbench: Table clamping surface 790 x 560 mm Number of T-slots 4 + 1 T-slots - spacing 100 mm T-slots - width 4x 14H12 / 1x 14H7 mm max. table load 600 kg Table height above floor 720 mm Distance between spindle nose and table 120 - 580 mm Tool changer: Number of tool slots 20 pos. Max. tool width 80 / (130) mm max. tool length 250 mm max. tool weight 6.0 kg max. total weight 80 kg Tool - Tool change time 1.6 sec Changeover time span - span 6.0 sec Feeds: Rapid traverse 30 m/mi ...
used
Inv. Num. : 7145 Type: DMC 635 V eco Producer: DMG Created: 2014 Parameters: Control System: Fanuc Series Oi-MC Work table length: 790 mm Work table width: 560 mm Maximum table load (uniform): 600 kg Maximum vertical spindle speed: 10000 1/min X-axis travel: 635 mm Y-axis travel: 510 mm Z-axis travel: 460 mm Machine height: 2650 mm Machine length: 2050 mm Machine width: 2530 mm Machine weight: 3900 kg 2023: Spindle replacement
used
DMG MORI DMC 635 V Ecoline vertical machining center Working hours total 1000 hours. Very little use.
used
CNC vertical milling machining center Deckel Maho DMC 635 V ecoline.
used
Doppstadt AK 635 Compact - Built in 2013 - Hours 4839 - Permissible total weight 25,000 kg - Mercedes Benz diesel engine 635 hp at 2,000 rpm - AD BLUE - Load-dependent control of the material feed incl. automatic scraper floor reversal - Separate drive of feed roller and scraper floor (twin drive) - Fuel tank 750 litres - Feed roller: length 1,690 mm, diameter 510 mm, with attached tooth segments - Auxiliary hydraulic connection 11 cm³ - Rear hinge: wheelbase 6,150 mm, - Scratching floor with 34 strips - Overbelt magnet -Radio remote control incl. transmitter, receiver, - Strainer basket Machine is overhauled and immediately available
used
Control cabinet, distribution cabinet, control cabinet, TS modular cabinet, profile door -Side door -Dimensions: 1980/635/H40 mm -Weight: 26 kg
used
Welding bar -from: vacuum device Roschermatic VM 45/2 -Price: per piece -Number: 4 pieces -Length: 635 mm/15 mm/30 mm -Weight: 2.2 kg/piece
used
DMG ecoMill 635V Year of construction: 2015 Control: Haidenhain TNC 620 Travel (X/Y/Z): 635x510x460mm Table size: 790x560mm table load: 600kg Spindle speed: 8,000 rpm Tool changer: 20 seats Drive power spindle: 13/ 9kW Tool holder: SK40 Switching-on hours: approx. 20.300h Spindle hours: approx. 7.500h Accessories Conveyor Machine weight: 3,9to
used
wheel alignment scissor lift 5t, galvanized, Specifications: Stroke underfloor 1,800mm, stroke above-ground 2,160 mm Overall length 5,200 mm, overall width 2,300 mm, ramp height 360 mm, platform length 5,200 mm, Platform width 729 mm, motor power 3 kW, electrical connection 230/400V, 50 Hz, compressed air connection 6-8 bar, Lifting time 45 sec., lowering time 45 sec. Characteristics: Electro-hydraulic drive,2 maintenance-free hydraulic cylinders, No mechanical connections between the rails,Maintenance-free roller lafers, HD unit integrated in the control panel, operation via push buttons with integrated storage option, Integrated hand pump and emergency lowering in case of power failure, Hydraulic synchronization system with automatic level compensation (master-slave system)Pneumatic set-down device with automatic pressure system. Unlocking, non-contact inductive proximity swit ...
used
The machine is in good technical condition, after prior agreement it is possible to test it. Travels X=635 mm, Y=510 mm, Z=460 mm, speed range 20 – 8000 rpm.
used
SHELVING SYSTEM STOW 37 LFM H:590 / 635 CM SECOND-HAND GOODS Data: H : approx. 590 / 635 cm D : approx. 110 cm L : approx. 37 m Load: 1600 kg shelf load Stand in grey Trusses 360 cm Trusses in orange Used goods from stock Wietmarschen Shelf consists of : 11 x stand approx. 590 / 635 cm x 110 cm 60 x truss approx. 360 x 12.5 cm 120 x locking pins. Levels: Floor + 3 160 pallet spaces Price: 3750,00 € Net plus statutory VAT. You will receive an invoice with VAT.
used
Mori Seiki Dura Vertical 635 Eco Year of construction: 2010 Control: Mitsubishi MSX-853IV Spindle speed: 8,000rpm Spindle power: 12kW Table size: 790x560mm Travels (X/Y/Z): 635x510x460mm max. table load: 600kg Tool holder: BT40 Tool changer: 20-fold Accessories: 32 pieces of tool holders Documentation Operating hours: approx. 14.820h Machine weight: 3.7 tons
used
used
Type: MCFV 1250 X-axis: 1250 mm Y-axis: 600 mm Z-axis: 635 mm Table dimensions: 1450 x 610 mm Admission in spindle (ISO): ISO 50 Power on the spindle: 15/18,5 kW Control : Heidenhain Toolchanger: yes, 2 toolchangers Number of toolholders: 2x 16 positions Number of rotations: 1 > 2800 rpm Power principal motor : 38 kW - 150 amp Length: 3200 mm Depth: 2200 mm Weight: 7,2 ton
used
Assembly star, assembly table, workbench, welding table, clamping plate, turning device, container turning device, welding turning device -Carrier frame for: BMW engines 4/6 cylinder -with: locking -Load capacity: kg -Working width: 250 mm -Working height: 180 mm -Dimensions: 550/360/H445 mm -Weight: 130 kg
used
Assembly star, assembly table, workbench, welding table, clamping plate, turning device, container turning device, welding turning device -Load capacity: 100 kg -Working width: 635 mm -Max. Diameter: mm -completely rotatable -Number: 1x devices available -Price: per piece -Dimensions: 1355/200/H450 mm -Weight: 19 kg
used
Control: The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
used
Key data: 635 mm, 510 mm, 460 mm
Control Heidenhain iTNC 530 Travel x/y/z 635 mm / 510 mm / 460 mm Max. spindle speed 18,000 rpm Drive power of the main spindle 13 / 9 kW Tool holder SK 40 DIN 69871 Table clamping surface / max. table load 790 mm x 560 mm / 600 kg Tool changer with 30 positions Rapid traverse 30 m/min Total power requirement / machine weight 23 kVA / 4.5 t Space requirement 3.5 m x 4.0 m x 2.7 m
used
Clamping surface of the magnet 600x350 mm Max grinding width 400 mm Max grinding length 700 mm Max distance of spindle axis from clamping surface Dimensions br. discs (ø x width x clamping hole) 300 x 20-50 x 76 Machine movement speed 2 -28 m/min Automatic transverse feed adjustable 1 – 60mm/Hub Automatic vertical movement 0.002 – 0.06 mm Machine weight approx. 2800kg Machine vagaries approx. 2800 x 1900 x 2400 mm Sander fully functional, can be tested.
used
Category bench boring mill Make Stankoimport Type 2 A 635 Year of construction 1974 Spindle diameter 125 mm x-travel 1600 mm y-way 1400 mm z-travel 1600 mm Table size 1800 x 1600 mm Spindle mount MK 6 Drilling depth in one go 1000 mm Quill stroke 1000 mm Speed range - spindle 8 - 1250 rpm Speed range - facing slide 5 - 315 rpm Feeds - longitudinal / transverse / vertical 1 - 800 mm / min Table can be rotated 360 ° Table load 4000 kg Division 0.5 ° Distance table - spindle center 50 - 1350 mm Face slide feeds: 1 - 800 mm / min Cross slide diameter 800 mm Spindle drive 17 kW Machine weight approx. 32.5 t Space requirement approx. 7.50 x 3.50 x 3.93 m Accessories facing slide, stick, 2 support sleeves
used
x-travel: 635 mm y-travel: 510 mm z-travel: 460 mm spindle turning speed - stepless: 20-14000 U/min weight of the machine ca.: 4 t dimensions of the machine ca.: 5 x 3.5 x 2.7 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
used
This DMG MORI DMC 635V ecoline Vertical Machining Centre was manufactured in 2014 in Poland. It has 3 axes with a X-travel of 635mm. Equipped with a tool magazine of 20 tool it can handle a max. tool weight of 6 kg, a max. tool length of 300 mm and a max. tool diameter of 80 mm. The table size is 790 x 590 mm with a max. load of 600 kg. It runs with a SK40 tool holder and a spindle speed of 12000 rpm. The machine has operated 63868 power on hours and 33482 spindle hours. It comes with chip conveyor and cooling through spindle. See photo and video gallery for more impressions.
used
grinding length: 650 mm, grinding width: 375 mm, grinding height: 375 mm, magnetic plate size: 600x300 mm, weight approx.: 2,900 kg, Approx. Onsite Dimension. (l x w x h): 2,800 x 1,900 x 2,400 mm