dipping machines used for sale

Komptech Multistar L3 # 75144 Facilities Multistar L3 Trailer Multistar L3 EU Declaration of Conformity Connect Control cabinet 50Hz Diesel generator 80 kW T4f/Stage V Cleanfix - Fan Fine Screen Deck 10/25 S1 Coarse screen deck 60/90 Bunker Hydr.Foldable Dosing roller Hammer Standard Fine grain collection belt Medium grain discharge belt Air Classifier Medium Grain Preparation of the GK air classifier Trailer (3-axle) Switching from 3 to 2 fractions Slip-on shoe Condition: Servicemaintained Availability: by arrangement Warranty: The machine will be sold in the condition existing at the time of delivery. The seller assumes no liability for defects. We reserve the right to sell in advance, make changes and repairs.

The mobile spiral mixer: optimal mixing results even with very small quantities; max. 80 kg dough / 50 kg. flour; bowl, spiral and guard from stainless steel ; two speeds; wheat, mixed wheat, mixed rye, rye doughs; power: 2.6 / 3.2 kW / 380V

1 BARUDAN double head embroidery machine type BEAT-802T-YS, 2 heads, 7 needles each head, with driver unit SDV-I, BARUDAN SMT keyboard

Komptech Multistar L3 Category: Star Screen Specification: Serial / reference number: 75070 Designation: Multistar L3 Performance: Weight: kg Emission class: Tier 4 Final / Stage V Equipment and description: Screen with 3 fractions – fine fraction (mm): 0/10... 25 Middle fraction (mm): 10... 25/60… 90; Coarse fraction (mm): > 90... 120 75 kW/A Diesel Generator Bunker volume: 7 m3 Feed height (mm): 3,450 / Feed length (mm): 3,750 Max. discharge height medium and fine fraction (mm): 3,500 / Max. discharge height coarse fraction (mm): 2,850 Weight approx. 21 tons / Transport length (mm): 11,500 / Transport width (mm): 2,250 / Transport height (mm): 4,000 Throughput depending on the type of material up to approx. 200 m3/h Availability: by arrangement Warranty: The machine will be sold in the condition existing at the time of delivery. The seller assumes no ...

complete stainless steel Track width 600 mm Adjustable height of the finished product from 2 to 35 mm stepless speed (lower and top belt can be adjusted separately) with executable belt Mobile 0.5 kW Dimensions (L x W x H) : ± 2,250 x 1,000 x 2,100 mm

Used cutting machine Hundegger K2 Manufacturer: Hundegger, DE Type: K2 Built: 2000 Condition: used, in operation, very good Consisting of: 1. Fully automatic wood conveying with feed roller conveyor and feed and feeding cross conveyor Consisting of a roller conveyor with cross-over from the cross conveyor with 5 strands equipped with hinge tape chains, which ensure injury-free transport Length: 9.2 m, Width: 2.2 m 2. Lower table swivel crosscut saw with 4-axis control With a carbide saw blade of 740 mm (11.0 KW) max. saw cutting depth: 300mm at 90° infinitely adjustable machining stroke with positioning drive pivotable 0- 360°, inclination 0-65°, drive servo-hydraulic, With this aggregate, all saw cuts, such as angles and shitging sections, longitudinal sections for burring and lruning, hewing or stash sections) are executed. Thanks to the 4-axis control, witch  ...

Inv. Num. : 9234 Type: TruLaser 1030 Producer: Trumpf Created: 2024 Parameters: Control system: SINUMERIK 840D SL Maximum power: 10 kW Work table length: 3000 mm Work table width: 1500 mm Maximum sheet thickness when cutting (stainless steel): 40 mm Maximum sheet thickness when cutting (aluminium): 30 mm Maximum sheet metal cutting thickness (steel): 35 mm Maximum sheet metal cutting thickness (copper/brass): 12 mm Feed length Z-axis: 115 mm Source: TruDisk 10 000 W Machine height: 2200 mm Machine length: 9300 mm Machine width: 4700 mm Machine weight: 5500 kg Equipment: Cross and longitudinal conveyors Pallet Changer

Used cutting machine Hundegger K2 machining width 1250mm Manufacturer: Hundegger, DE Type: K2i - 5 1250mm Built: 2009 Condition: used, in operation, very good Consisting of: 1. Fully automatic wood conveying with feed roller conveyor and feed and feeding cross conveyor Consisting of a roller conveyor with cross-over from the cross conveyor with 5 strands equipped with hinge tape chains, which ensure injury-free transport Length: 9.2 m, Width: 2.2 m 2. Lower table swivel crosscut saw with 4-axis control With a carbide saw blade of 900 mm (11.0 KW) max. saw cutting depth: 300mm at 90° infinitely adjustable machining stroke with positioning drive pivotable 0- 360°, inclination 0-65°, drive servo-hydraulic, With this aggregate, all saw cuts, such as angles and shitging sections, longitudinal sections for burring and lruning, hewing or stash sections) are executed.  ...

Used cutting machine Hundegger K2 -5 machining width 625mm Manufacturer: Hundegger, DE Type: K2 - 5, 625mm Built: 2006 Condition: used, in operation, very good Consisting of: 1. Fully automatic wood conveying with feed roller conveyor and feed and feeding cross conveyor Consisting of a roller conveyor with cross-over from the cross conveyor with 5 strands equipped with hinge tape chains, which ensure injury-free transport Length: 9.2 m, Width: 2.2 m 2. Lower table swivel crosscut saw with 4-axis control With a carbide saw blade of 900 mm (11.0 KW) max. saw cutting depth: 300mm at 90° infinitely adjustable machining stroke with positioning drive pivotable 0- 360°, inclination 0-65°, drive servo-hydraulic, With this aggregate, all saw cuts, such as angles and shitging sections, longitudinal sections for burring and lruning, hewing or stash sections) are executed ...

Seidenader line for the visual inspection of vials, comprising a Seidenader DT1202 vial/bottle feeding turntable with a diameter of 1200 mm, 1 x 2 units. Seidenader V90-AVSB/30-LR + V90-AVSB/30-RL semi-automatic inspection machines for the visual inspection of cosmetic defects and particles in vials, etc., size range from 0.5 to 1000 ml, throughput of up to 150 objects per minute. The machine is used for the visual inspection of particles, glass defects and gross defects, cracks and hairline cracks. The machines are equipped with TYNDALL light from the top front for cap and glass defects (the light shines from above onto the caps of the containers; for lyophilisates, powders and emulsions, it also shines onto the product) and TYNDALL light from below at the front for non-clear liquids, emulsions, powders and lyophilisates (the light shines diagonally from below onto the base of the conta ...

1st unit : M7/46 – 2 buckles 2nd unit : M7/46 – 2 buckles SBAP 46-ME-52 delivery

Choose a suitable roaster and stay flexible! We can offer various roasters as follows: - Short-term rental of min. 1 year - long-term rental incl. maintenance contract - discounted takeover option after expiry of the contract. - Roaster color can be determined individually. - Roasters are delivered, installed and your staff trained. - Entsteiner, Afterburner and Coffee Loader can also be ordered on request. - and much more! Contact us and find your perfect equipment! We have many ways to meet your exact needs. Get the all-in package and you don't need to spend time in the maintenance etc. of used roasters. Focus on your business and roasting process!

3000 x 1500mm 4000w

White 91 Portioning Machine used Hourly capacity approx.: 1400 portions Ejector diameter: 90mm (other plates on request) Strength adjustment via sliding handle at the front Machine with corresponding traces of use and wear, but in good condition neat and quiet run Machine must be thoroughly cleaned before use Video about test run available

Komptech Multistar One Star screen with electric drive #6929 Facilities Multistar ONE EU Declaration of Conformity Feed hopper Anthology Machine documentation 5 inch touch panel Electric Hydraulic Pump HyDrive 2.0 MS ONE Doppstadt Siebdeck 60/90 Drive motors (2 pcs.) Fine grain discharge belt Oversize discharge belt Hook Lift axle Shunting drawbar Condition: Servicemaintained Availability: by arrangement Warranty: The machine will be sold in the condition existing at the time of delivery. The seller assumes no liability for defects. We reserve the right to sell in advance, make changes and repairs.

CNC-Portal Cutting Machine Manufacturer: Sato Type: Satronik D5765 Built: 2016 CNC control: Satocontrol CNC 3010 Track width: 5,750 mm 6 x oxyfuel torche without a career without table without filter

Tube filling and sealing machine for PE, laminate and metal tubes Power up to 3,700 tubes /hr depending on

CNC lathe GILDEMEISTER CLX 350 V3 With control DMG MORI SLIMline Multi Touch Fanuc I series Year of manufacture: 2018 Turning diameter: 320 mm Travel in X: 242 mm Travel in Z: 540 mm Spindle bore: 65 mm Speed range: 20 – 5000 rpm With the following accessories: Slide protection with interior lighting 12-speed turret with 12 driven tool stations VDI 30 C Axis , Tailstock with Quill Programmable tailstock via M function Tool measurement in the work area Electronic handwheel Chip conveyor 3 jaw chuck hydraulic Schunk ROTA THW plus 0 210 mm Foot switch for jaw chuck adjustment Parts catcher Glass Scale in the X Axis Coolant device with high-pressure pump 12 bar Coolant spray gun Operating Instructions

The machine is equipped with smart blade oiling system for slicing wholemeal bread. 7.5 kW SEW motor; 2 belts: conveying and tightening (mechanically adjustable); 2 side belts adjusted manually with a pointer scale; easily replaceable blade system; frame painted RAL 9007 (aluminium grey); efficiency depends on the consistence and size of the product; slicer’s speed: up to 4000 pcs/h; voltage: 400 V, 50 Hz, 3-phase: Compressed air 6 bar: length: 2500 mm, width: 1100 mm, height: 2150 mm; weight: approx. 1100 kg used, working condition Slicer for extra heavy bread

Ref. 531 Eurofold 235 Model: 435.122 Serial: 20287 05 Year of construction approx. 2007 4 pockets Max. sheet format: 350 x 650 mm Paper Weight: 40-240g/m² Folding capacity up to 30,000 A4/hour Shed display Counters/Lots Counters With cutting and perforating wheel Instruction manual and spare parts list Condition: Functional / Mint Rolls Ref. 531 Eurofold 235 Model: 435.122 Serial: 20287 05 Year of manufacture: approx. 2007 4 pockets Max. sheet size: 350 x 650 mm Paper weight: 40–240 g/m² Folding capacity up to 30,000 A4 sheets/hour Staggered delivery Counter/batch counter With cut and perforating wheel Operating instructions and spare parts list Condition: Fully functional / Rollers in mint condition

Table clamping area: 350 x 700 mm x-path: 500 mm y-way: 320 mm z-way: 400 mm Spindle holder: SK 40 Spindle speeds: 30 - 2500 rpm Operating voltage: 380 V Total power requirement: 2.2 kW Space requirement: 1500 x 1500 x 1800 mm Weight: approx. 1700 kg

Planing machine Weinig hydromat H30 W baujar 1990 36m/min Working width 300mm working-high 200mm memeeser of the fresspindel 50mm with suction

ALLCOMP UNICUT CC 5018 automatic cutting machine was built in 2015 in Poland by ALLCOMP POLSKA Sp. z o.o. The machine designed for the manufacture of clothing and all types of sewing products enables the cutting of single and multi-layered materials. It is distinguished by the use of state-of-the-art technology, which enables full automation of the cutting process while reducing material losses. The cutting process is performed by means of a robust oscillating knife, which is automatically sharpened during operation. This solution minimises the number of undercuts and ensures high repeatability of the cut regardless of the type of material being cut. Thanks to the high oscillation speed of the knife at 6000 cycles per minute, all operations are performed rapidly with the highest cutting quality. The UNICUT CC50 automatic cutting machine is controlled by dedicated software, which al ...

Used 3-station turbine packing machine. Dose range 5-50 kg, has a pickup conveyor and a bag-forming conveyor. YOM 90's.

Spiral kneader Diosna Oasis SPK 200 E with emptying of the soil -Spiral kneader with center emptying -Stainless steel boiler and tool -for max. 200 kg dough

Labeler Manufacturer ADE Type PA-100-40-T The ADE labeller for Bollini is a technical solution specially designed for the fast and accurate labelling of bottles, cans and other packaging. Ideal for the food and beverage industry, this device helps to optimize work processes and increase efficiency in production. Features of the ADE labeler: 1. High speed: The ADE labeler can apply an impressive number of labels per minute, which speeds up the production line and reduces waiting times. 2. Precision: Thanks to modern technology, the labeler ensures accurate label placement, which ensures an attractive presentation of products and improves recognition. 3. Easy to use: The user interface is intuitively designed, so even new employees can quickly learn how to operate the device and make adjustments. 4. Versatile Application: The labeler is flexible in use and can be adapted to differ ...

Used line for packing powdered products Chronos. Powdered products are packed in four-layer paper bags with a polyethylene insert of 25 kg net or BIG-BAG containers with a capacity of max 1000 kg. Packing in 25 kg bags takes place on an automatic Chronos packing machine. The packing machine automatically weighs, seals the polyethylene bag and seals the paper bag.

Cone cutter Martin Tenon cutting and slitting machine Type T27 Speed of the milling shaft 3000 + 4500 rpm Height adjustment range of the milling shaft 145 mm Largest diameter milling tool 390 mm Maximum clamping height 135 mm Spindle diameter 40 mm Milling motor 5.5 / 7.5 kW Speed of the cut-off saw 3000 rpm Height adjustability of the cut-off saw 190 mm Maximum cutting height cut-off saw 100 mm Maximum saw blade diameter 350 mm Lateral adjustability of the cut-off saw 250 mm Engine power cut-off saw 1.1 kW Saw blade spindle diameter 30 mm Travel of the sliding table 1270 mm Shipping Dimensions Machine on pallet 670 kg 1800 mm x 1050 mm x H 1600 mm Sliding table on pallet 83 kg 1200 mm x 800 mm x H 1300 mm Stop rail approx. 10 kg 1860 mm x 160 mm x 160 mm

Used automatic labeling machine for cylindrical packaging, for self-adhesive labels (paper or foil), produced by ETMA, Germany, model R-TB - 150/2000. New: 1995 Marking labels with batch number / expiry date: hot-stamping.

Used blister machine for PVC / alu blisters, produced by EMPAK Kraków, model: PFR-7n. New: 1994. Marking blisters with an inkjet printer.

TRUMPF TruMatic TC 6000 L-1300 punch laser machine was built in 2010 in Germany by TRUMPF Werkzeugmaschinen GmbH+Co. KG. The machine combines punching, laser cutting, threading and forming, enabling comprehensive sheet metal machining in a single work cycle. The use of all these technologies in a single system eliminates the need for additional machining on other machines, reducing machining times and increasing productivity. The TRUMPF TruMatic TC 6000 L-1300 is distinguished by its welded C-shaped design, which guarantees high stability under heavy loads. Its large work table has built-in balls designed for easy positioning of the material during machining. All operations are performed by means of a universal work head, combined with a 2 kW laser. It enables punching holes with a maximum diameter of 76.2 mm, cutting workpieces with a maximum thickness of 8 mm and threading in the M2 ...

InfoTEC 2515 Energy CNC router was built in 2017 in Poland by 4CNC Sp. z o.o. The machine is designed for the production of precise, repeatable parts made of a wide range of materials, i.e. wood, plastics and light metals. Its versatility and cost-effectiveness make it an excellent choice for companies with diversified production profiles. Materials are machined on a large work table using a brushless HSD spindle with automatic tool changing (ATC) system. This system allows the use of several tools in a single machining cycle, significantly saving the time required for changeover of the workhead. What’s more, the innovative control system has been integrated with powerful digital AC servo motors to achieve excellent dynamics and feed repeatability. The InfoTEC 2515E CNC milling machine weighs approximately 2200 kg. Technical specifications of the InfoTEC 2515 Energy milling machi ...

Used cartoner Höfliger + Karg (Bosch) CARTONETTA. New 1975. Dimensions: lenght 2850 mm + ca. 3000 mm conveyor width 1100 mm height 1600 mm weight 450 kg. Voltage: 380V with a power socket Machine speed: up to 50 cartons per minute Folding the leaflet: 3 or 4 fold the sheet. Dimensions for folding leaflets: 3 - fold: from 90 x 90mm to 210 x 210mm 4 - fold: from 90 x 90mm to 297 x 210mm Carton length: 50 - 180mm Carton width: 15 - 80mm Carton height: 16 - 60mm

NAKAMURA TOME WT-100 CNC Tower TECHNICAL FEATURES: Year: 2012 NC Type: FANUC 31i-B Distance between spindles: 735 [mm] Maximum diameter Turning time: 190 [mm] Maximum length Machinable: 503 [mm] Y-axis travel: -31 / +31 [mm] Z1 axis stroke: 503 [mm] X1 axis stroke: 135 [mm] Z2 axle stroke: 503 [mm] X2 axle stroke: 135 [mm] X1 Axis Fast Forward Speed: 16000 [mm/min] X2 Axis Fast Feed Speed: 16000 [mm/min] Z1 axis fast feed speed: 40000 [mm/min] Z2 axis fast feed speed: 40000 [mm/min] Y-axis fast feed speed: 6000 [mm/min] Spindle Nose: A2-5" Maximum diameter in bar turning spindle: 42 [mm] Spindle Bore: 56 [mm] Maximum speed Spindle: 6000 [rpm] C-axis indexing accuracy: 0.001 [°] Spindle power: 11 [kW] Spindle torque: 75.4 [Nm] Counter Spindle Nose: A2-5" Counter-spindle bore diameter: 56 [mm] Counter-spindle stroke: 525 [mm] Maximum speed Spindle: 6000 [rpm ...

Key data: 460 mm, 705 mm, 3500 1/min

Sell a DMG T2 CNC lathe from 2023 with 1m bar feeder IEMCA The machine is in good condition and offers: • Modern Siemens One CNC control with touchscreen operation • Driven tools, C axis, short bar loader 1m, tailstock, chip conveyor, hydraulic chuck 250mm, tool measurement 5 driven tools, various tool holders • Robust design for professional use • Compact design with high performance • All protections and safety features The lathe has been regularly serviced and is ready for immediate use. Machine is still in operation. Ideal for workshops, prototyping or smaller series production. Price plus VAT If you have any questions, please feel free to contact us.

Used KAR 1 cardboard box closing machine. The device is used to automatically insert the tube into the cardboard box. The cartons are previously unfolded and pressed into special slots on the chain conveyor. The box passes through the individual slots, activating subsequent actuators closing the box. At the end of the transporter there is a receiver that takes out the cardboard boxes. Packaging of 3 pieces takes place on the conveyor belt, and then it is turned by 90 degrees and taken out of the machine.

AGIE CHARMILLES FORM E 600 die-sinking EDM was built in 2024 in China by Beijing Agie Charmilles Co., Ltd. The machine is designed for precision EDM machining of workpieces with a maximum weight of 1000 kg. Electrical discharge machining enables complex shapes to be made in even the hardest materials, as well as minimises or completely eliminates the need for further finishing processes, such as polishing. The AGIE CHARMILLES FORM E 600 is a state-of-the-art solution for companies looking for high efficiency, precision and low operating costs. The stable design is based on a rigid ‘C’ shaped frame and a cross table that performs movements in the X and Y axes. Precise positioning in all linear axes is ensured by servo drives that work with ballscrews, encoders and measuring scales with a resolution of 0.1 μm. The accuracy of the movements is additionally controlled with a laser in ...

AGIE CHARMILLES CUT 30 P wire EDM was built in 2012 (launched in 2013) in China by Beijing Agie Charmilles Co., Ltd. The machine is designed for the production of precision dies, cutting dies, punches and other parts with complex geometry. Workpieces with a maximum weight of 1000 kg are machined by means of electrical discharge machining, which enables the creation of complex shapes even in the hardest materials. The process involves the removal of material by means of controlled electrical discharges between the wire and the workpiece submerged in a dielectric. This results in a high-quality surface finish without the need for additional finishing operations, such as polishing. The AGIE CHARMILLES CUT 30 P performs machining with a cutting head that moves in the X, Y and Z axes with feeds of 600 mm, 400 mm and 350 mm respectively. Maximum cutting accuracy is ensured by a HANS SCHMIDT ...

Used bag packing line. The screw conveyor with the agitator is new, manufactured in Poland in 2019. Possibility packing from 5 to 50 kg. Capacity 3-4 bags per minute depending on the weight of the bag. The greater charge, the smaller number bags per minute.

Mixer Bär AR 40 MK1 40 l bowl– 1 pcs; beater 1 - pcs bowl ang spiral stainless steel; power: 1,1 kW

Ref.nr. 00918 Description d He Plant CNC Bending Machine for fully automatic wire and forming machining. The machine was commissioned in March 2019 and is designed for the cost-effective series production of complex bent wire parts. By combining different machining steps in one system, the SpeedMax series enables extremely efficient production with high precision and repeatability. Manufacturer: SCHMALE Maschinenbau GmbH Model SpeedMax L-20-1-03 Year of construction 2019 Technical data: Commissioning: 03/2019 Total system unit counter: 12,423,581 parts (as of 02/2026) Application: Wire bending and forming Fully automatic CNC-controlled production system Special features: Designed for high volumes and series production High production speed and process reliability Condition Under power can be demonstrated Submission date Immediately by arrangement

Matsuura MC600VF Vertical Machining Centre in great working condition ready to use. COOLING TROUGH SPINDLE YEAR: 1997 with Yasnaz i80M Control, Table size 870 x 400mm, 20 Position ATC, BT40 Taper, Spindle Chiller, Coolant Tank, X = 600 Y = 410 Z = 470mm, Spindle Speeds 30 – 8000rpm. S/No. 970112285 including Large Qty of BT40 Tooling (33 TOOLS, Universal 3D Tester. Country of Origin: Japan. INCLUDED AS WELL BACK UP PARAMETERS.

RSA NC-V 2000 Deburring Machine + Pipe Washer + Coral Filter Complete industrial tube processing and post-treatment line The plant consists of three high-quality industrial components: 1. RSA RASAPLAN NC-V 2000 – High-performance deburring machine Function: Automatically processes workpiece lengths up to max. 2,000 mm. 2. BOUS (CeBeCo) Rowamat RL 200 – Continuous pipe washing system Function: Extremely robust and durable stainless steel welded construction. Accessories: 3. CORAL IperJet DF4 – Cartridge Filter Extraction System Power: 4 horizontal high-performance filter cartridges with fully automatic Jet-Pulse compressed air cleaning (very low-maintenance). Function: Reliably extracts brush dust, sanding residues or fumes from the car wash. The RSA Rasaplan NC-V2000 is a fully automatic, high-performance brush deburring machine that has been special ...

Model MC-800VF WITH 4 TH AND 5 TH AXIS FIRST TIME IN USE FROM 1996 Brand MATSUURA Type Vertical Machining Centers Control CNC (Yasnac i80 CNC control) Table 1200mm x 400mm Power 15 hp RPM 12000 rpm ATC 30 Taper BT40 Axis 3+2 Weight APROX 7000 KG TRAVELS: X = 800mm, Y = 440mm, Z = 485mm mfg MATSUURA mpn MC-800VF Matsuura MC-800VF WITH 4 TH 5 TH AXIS MACHINE WAS WORKING IN ROLLS ROYCE FROM A NEW AND IS GREAT MANTAINED HAS NEW BATTERIES, BACKUP MADE.

Availability: immediately Type: 90 Machine dimensions (LxWxH): 2.5 x 2.5 x 2.2 m Weight: 4000 kg Technical documentation: available Fully Automatic Labeling Machine Krones Prontomatic BR720-12-480-6-4-180 Type 90: Capacity: 16,000 bottles/h Bottle No. 1: 1.0 l VDF bottle Diameter: 89.5 mm Height: 306.5 mm Body label: 120 x 98 mm Adhesive height: 27 mm Chest label: 92.5 x 44 mm Adhesive height: 183 mm Back label: 75 x 90 mm Adhesive height: 27 mm Bottle No. 2: 0.7 l VDF bottle Diameter: 77.5 mm Height: 286.5 mm Body label: 120 x 98 mm Adhesive height: 30 mm Brood label: 82.5 x 44 mm Adhesive height: 172 mm Back label: 75 x 90 mm Adhesive height: 30 mm The machine was operated without technical problems until 04.2026. The dismantling was then carried out by specialist personnel - Prontomatic 720-12-480-6-4-180 - left-right - Steel glue roller - Neck ...

Key data: 2040 , 2

Motorized swivel bending machine Manufacturer Fasti Type 2095-20-2 Sheet power 2040 x 2 mm at 400 N/mm2 Digital display of the bending angle Foot pedal Notaus Power connection 400V

Weibert FR3 Engine power: 400V 3 kw 4 hp,2 engines Format sliding table: 1500mm Cutting height: 103mm Saw blade: swivel, max.315mm Milling: rigid 90° Milling rpm: Speeds: 1500/3500/6000/8000 rpm.

Production: • Bag type: Bottom seal bags • Suitable products: o Garbage bags o Fruit and vegetable bags o Various types of plastic bags Materials: • Processable materials: o LDPE o HDPE o MDPE Technical Specifications: • Maximum sealing width (bag width): 1200 mm • Bag length (draw length): 150–3400 mm • Number of lanes: 1 • Maximum linear speed: 150 m/min • Maximum production speed: Up to 50 bags/min Control System • PLC controlled • Operator interface terminal (HMI) • Print registration control • Servo-driven sealing bar Equipment • Unwind unit • Photocell • Anti-static bars

Column drilling machine with cross table Manufacturer: Helgerit / Perfect Type BF40VS Tool holder MK4 automatic feed Handwheel for fine feed Stageless speed control Digital rev counter 2 Pole motor 2 gear gearbox lighting Notaus Special price