diecutter used for sale

Tie bar expansion nut, adjustment nuts and split nuts for die casting machines from IDRA, Frech/Müller Weingarten, OP Die Casting Special price If you have a VAT number, we will be happy to issue you an invoice without VAT. Condition New The mother is new and fully functional. The goods can be viewed, checked and picked up at any time. We will also be happy to send you a sketch of the execution or deliver the goods to your address. Attention: We offer various columns, adjustment nuts, spar expansion nuts and 2 piece nuts of: IDRA D330, D300, D260, D250, Oleopress/OP Die Casting: D285, D250, Naughty: D375, D330, D300

Aluminium angular conveyor belt with substructure incl. adjustable feet as well as machine feet for levelling horizontal area: 2,500mm Rising Area: 800mm Angle of inclination in bend: 40° Conveyor belt total length: 3,100mm Discharge height: 700mm Height of horizontal: 320mm PU conveyor belt DM 10/2 0+005 PU incl. corrugated edge petrol matt Propulsion: Motor 0.55KW, speed 0.3m/sec Connection 230/400V, 50Hz IP54 protection Drive etc. ready for connection, motor 2 pcs. scalloped edges 80x45mm 2-ply particularly transversely stable Usable width 370mm

Aluminium angled conveyor belt incl. substructure horizontal area 1,500mm Rising area 2,100mm Angle in bend 35° Feed height: 200mm Discharge height 1,500mm Conveyor belt width 500mm PVC conveyor belt incl. cleats and corrugated edge Propulsion: Motor 0.55KW Speed approx. 0.3-0.5m/sec Connection 400/240V, 50Hz IP54 protection Drive etc. ready for connection, motor control optional 8x adjustable machine feet for alignment Scalloped edge: 50x35mm Centrally welded T-40 cleats - approx. 400mm pitch 2-ply particularly transversely stable Usable width: 290mm, results as follows: Transverse arrangement 70+35+290+35+70mm Accessories: Design for the suspension of the overbelt magnetic separator Permanent Overbelt Magnetic Separator TYPE PEM1200 1200 x 550 x 200mm = 4x eyebolt for suspension Drive roller + deflection roller S235 steel welded and machined Ø150x300 ...

Aluminium angled conveyor belt with substructure incl. adjustable feet as well as machine feet for levelling unevenness horizontal area: 1,500mm Rising Area: 4,000mm Angle of inclination in bend 45° Discharge height: 3,000mm Height of horizontal: 200mm Execution: Aluminum construction - 2-fold profile reinforced 90x45mm Drive roller + deflection roller S235 steel welded and machined Ø100x420mm convex overtightened, shaft fixed with tension bearings. Propulsion: Slip-on geared motor 0.55KW, speed 0.3m/sec Connection 230/400V, 50Hz IP54 protection Drive ready for connection up to motor terminal box (Commissioning must be carried out by a qualified electrician) PU conveyor belt DM 10/2 0+005 PU incl. corrugated edge PU petrol matt Conveyor belt width: 400mm 2 pcs. corrugated edges 50 high, 35mm wide, high-frequency welded 28 T-40 cleats, approx. 400mm pitch Belt mate ...

Complete solution for the transport of bulk materials such as wood chips, wood pellets, shredded material, granules, etc. Aluminium angled conveyor belt incl. substructure horizontal area 2,500mm Ziruu8vxy Rising area 2,400mm Angle in bend 45° Feed height: 300mm Discharge height 2,000mm Total conveyor belt length measured on the floor: 4,200mm Conveyor belt width 500mm PVC conveyor belt incl. cleats and corrugated edge Propulsion: Motor 0.55KW Speed approx. 0.3-0.5m/sec Connection 400/240V, 50Hz IP54 protection Drive etc. ready for connection, motor control optional 8x adjustable machine feet for alignment Scalloped edge: 50x35mm 25 pcs T-40 cleats - 396mm pitch 2-ply particularly transversely stable Usable width: 290mm, results as follows: Transverse arrangement 70+35+290+35+70mm ONLY AS LONG AS STOCKS LAST All our prices are net prices plus VAT. - can a ...

Complete solution for the transport of bulk materials such as wood chips, wood pellets, shredded material, granules, etc. Aluminium angled conveyor belt incl. substructure horizontal area 2,500mm Ziruu8vxy Rising area 2,400mm Angle in bend 45° Feed height: 300mm Discharge height 2,000mm Total conveyor belt length measured on the floor: 4,200mm Conveyor belt width 500mm PVC conveyor belt incl. cleats and corrugated edge Propulsion: Motor 0.55KW Speed approx. 0.3-0.5m/sec Connection 400/240V, 50Hz IP54 protection Drive etc. ready for connection, motor control optional 8x adjustable machine feet for alignment Scalloped edge: 50x35mm 25 pcs T-40 cleats - 396mm pitch 2-ply particularly transversely stable Usable width: 290mm, results as follows: Transverse arrangement 70+35+290+35+70mm ONLY AS LONG AS STOCKS LAST All our prices are net prices plus VAT. - can a ...

Permanent Overbelt Magnetic Separator TYPE PEM1200 1200 x 550 x 200mm = 4x eyebolt for suspension Drive roller + deflection roller S235 steel welded and machined Ø150x300mm convex overtightened, shaft fixed with tension bearings. Two-hole flange bearing UCFL with grease nipple, sealed bearing cage Propulsion: Slip-on geared motor GEMOTEG 0.18KW, speed 0.4m/sec Connection 400V, 50Hz IP54 protection Drive ready for connection up to motor terminal box (Commissioning must be carried out by a qualified electrician) PU conveyor belt endless GB30 black matt 7 x T20 cleats high-frequency welded High-quality 3-fold aluminum construction 2 side mudguards V4A Magnet dimensions: 700x230x120mm magnetic core encased in soft iron, so that a very high permeability can be guaranteed. Underbody tightly closed and sealed with stainless steel plate and pole shoes.

Permanent Overbelt Magnetic Separator TYPE DMPM800 1.600 x 900 x 220mm = Solid steel construction, welded Welded & painted construction RAL 7016 (anthracite grey) Magnet dimensions: 800x500x180mm Drive roller + deflection roller S235 steel welded and machined Ø220x700mm spherical overtightened, shaft fixed with tension bearings. Drive: Slip-on geared motor GEMOTEG 1.1KW, speed 0.4-0.6m/sec Connection 400V, 50Hz IP54 protection Drive ready for connection up to motor terminal box (Commissioning must be carried out by a qualified electrician) PU conveyor belt DM 20/2 0+010 PU black matt 5,4mm thick Conveyor belt width: 700mm 7 pcs. TG-40 cleats high-frequency welded Belt material: 3-ply particularly transversely stable Equipped with stainless alligator connectors RS125 Magnet Features: Built-in magnetic core: Strontium Ferrite Y30 Bonded SfRe strontium hard ferrite mag ...

Complete solution for the transport of bulk materials such as shredded material, wood chips, wood pellets, granules, etc. Aluminium angled conveyor belt incl. substructure horizontal area 2,500mm (customizable) Rising area 5,000mm (customizable) Angle in bend 35, 40 or 45° Feed height: horizontal (individual) Drop height individually adjustable Construction: height-adjustable (to be moved) Conveyor belt width 600mm (customizable) We supply our conveyor belts in PVC, PU, felt or rubber. PU conveyor belt incl. cleats and corrugated edge Propulsion: Motor 1.1KW ( adjustable ), speed approx. 0.3m/sec Connection 220/240V, 50Hz IP54 protection Drive etc. ready for connection, motor control optional 8x adjustable machine feet for alignment Scalloped edge: 50x25mm T-50 cleats - 400mm pitch 2-ply particularly transversely stable Permanently mounted overbelt magnetic  ...

Permanent Overbelt Magnetic Separator TYPE DMPM1400 1.600 x 900 x 220mm = Solid steel construction, welded Welded & painted construction RAL 7016 (anthracite grey) Magnet dimensions: 1.000x500x180mm Drive roller + deflection roller S235 steel welded and machined Ø220x700mm spherical overtightened, shaft fixed with tension bearings. Drive: Slip-on geared motor GEMOTEG 1.1KW, speed 0.4-0.6m/sec Connection 400V, 50Hz IP54 protection Drive ready for connection up to motor terminal box (Commissioning must be carried out by a qualified electrician) PU conveyor belt DM 20/2 0+010 PU black matt 5,4mm thick Conveyor belt width: 700mm 7 pcs. TG-40 cleats high-frequency welded Belt material: 3-ply particularly transversely stable Equipped with stainless alligator connectors RS125 Magnet Features: Built-in magnetic core: Strontium Ferrite Y30 Bonded SfRe strontium hard ferrite  ...

Permanent Overbelt Magnetic Separator TYPE DMPM1200 1.800 x 900 x 220mm = Solid steel construction, welded Welded & painted construction RAL 7016 (anthracite grey) Magnet dimensions: 1.200x500x180mm Drive roller + deflection roller S235 steel welded and machined Ø220x700mm spherical overtightened, shaft fixed with tension bearings. Drive: Slip-on geared motor GEMOTEG 1.1KW, speed 0.4-0.6m/sec Connection 400V, 50Hz IP54 protection Drive ready for connection up to motor terminal box (Commissioning must be carried out by a qualified electrician) PU conveyor belt DM 20/2 0+010 PU black matt 5,4mm thick Conveyor belt width: 700mm 9 pcs. TG-40 cleats high-frequency welded Belt material: 3-ply particularly transversely stable Equipped with stainless alligator connectors RS125 Magnet Features: Built-in magnetic core: Strontium Ferrite Y30 Bonded SfRe strontium hard ferrite  ...

Aluminium Z-conveyor belt incl. substructure Horizontal range 1,200mm (customizable) Rising range 3,000mm (customizable) 2nd horizontal range: 1,200mm (customizable) Angle in the bend 45 degrees each Feed height: horizontal (individual) Discharge height individually adjustable Construction: height adjustable (can be moved) Conveyor belt width 700mm (customizable) We supply our conveyor belts in PVC, PU, felt or rubber. PU conveyor belt incl. cleats and corrugated edge Drive: Motor 1.1KW (adjustable), speed approx. 0.3m-0.5m/sec Connection 220/240V, 50Hz protection class IP54 Drive etc. ready for connection, motor control optional 8x adjustable machine feet for alignment Scalloped edge: 80x50mm T-65Studs - 150mm 2-layer particularly transversely stable We always have various systems of this type in stock. The delivery time of an individual system is currently ap ...

Complete solution for transporting bulk materials such as wood chips, wood pellets, shredded material, granules, etc. Aluminium flat conveyor belt without substructure Horizontal area 6,000mm (customizable) Feed height: horizontal (individual) Discharge height individually adjustable Construction: height adjustable, machine feet Conveyor belt width 600mm (customizable) We supply our conveyor belts in PVC, PU, felt or rubber. PVC conveyor belt incl. cleats and corrugated edge Drive: Motor 1.1KW (adjustable), speed approx. 0.3m-0.5m/sec Connection 220/240V, 50Hz protection class IP54 Drive etc. ready for connection, motor control Scalloped edge: 80x50mm flush with both sides Centrally welded T75 studs 2-layer particularly transversely stable We always have various systems of this type in stock. The delivery time of an individual system is currently approx. 2-3 w ...

Complete solution for transporting bulk materials such as wood chips, wood pellets, shredded material, granules, etc. Aluminium flat conveyor belt incl. substructure Horizontal range 5,000mm (customizable) Feed height: horizontal (individual) Discharge height individually adjustable Construction: height adjustable, machine feet Conveyor belt width 600mm (customizable) We supply our conveyor belts in PVC, PU, felt or rubber. PU conveyor belt incl. cleats and corrugated edge Drive: Motor 1.1KW (adjustable), speed approx. 0.3m-0.5m/sec Connection 220/240V, 50Hz protection class IP54 Drive etc. ready for connection, motor control optional 6x adjustable machine feet for alignment Scalloped edge: 80x50mm flush with both sides 2-layer particularly transversely stable We always have various systems of this type in stock. The delivery time of an individual system is curr ...

Complete solution for transporting bulk materials such as wood chips, wood pellets, shredded material, granules, etc. Aluminium angled conveyor belt incl. substructure Horizontal area 800mm Rising range 2,000mm Angle in the bend 45° Feed height: 300mm Conveyor belt width 500mm PVC conveyor belt incl. cleats and corrugated edges, blue FDA- Food compliant, food certificate is included Drive: Motor 0.55KW Speed approx. 0.3-0.5m/sec Connection 400/240V, 50Hz protection class IP54 Drive etc. ready for connection, motor control optional Freely steerable transport rollers incl. parking brake Scalloped edge: 50x35mm T-40 cleats - approx. 300mm pitch 2-layer particularly transversely stable Usable width: 290mm, results as follows: Cross arrangement 70+35+290+35+70mm All our prices are net prices plus VAT. - can also be viewed under power after consultation!

Complete solution for transporting bulk materials such as wood chips, wood pellets, shredded material, granules, etc. Aluminium angled conveyor belt incl. substructure Horizontal range (customizable) Rising Range (Customizable) Angle in the bend infinitely adjustable Feed height: horizontal (individual) Discharge height individually adjustable Construction: height adjustable Conveyor belt width (customizable) We supply our conveyor belts in PVC, PU, felt or rubber. We always have various systems of this type in stock. The delivery time of an individual system is currently approx. 3-4 weeks, depending on the production effort. Our core competence lies in providing customers with exactly what they really need. Together with our customers, we develop customer-specific, individual solutions and deliver corresponding systems from our own production. Feel free to contac ...

Aluminium Z conveyor belt incl. mobile substructure Horizontal range 800mm (customizable) Rising range 2,000mm (customizable) 2. Horizontal range 800mm (customizable) Angle in the bend variable, infinitely adjustable Feed height: horizontal (individual) Discharge height individually adjustable Conveyor belt width 600mm (customizable) We supply our conveyor belts in PVC, PU, felt or rubber. PU conveyor belt incl. cleats and corrugated edge Drive: Motor 0.55KW ( customizable ), speed approx. 0.3m/sec Connection 220/240V, 50Hz protection class IP54 Drive etc. ready for connection, motor control optional 8x adjustable machine feet for alignment Scalloped edge: 50x25mm T-50 Cleat - 400mm pitch 2-layer particularly transversely stable The delivery time of an individual system is currently approx. 3-4 weeks, depending on the production effort. Our core competence lies  ...

Complete solution for transporting bulk materials such as wood chips, wood pellets, shredded material, granules, etc. Aluminium angled conveyor belt incl. substructure Horizontal range 2,500mm (customizable) Rising range 4,000mm (customizable) Angle in the bend freely infinitely adjustable Feed height: horizontal (individual) Discharge height individually adjustable Construction: height adjustable (can be moved) Conveyor belt width 600mm (customizable) We supply our conveyor belts in PVC, PU, felt or rubber. PU conveyor belt incl. cleats and corrugated edge Drive: Motor 1.1KW (adjustable), speed approx. 0.3m/sec Connection 220/240V, 50Hz protection class IP54 Drive etc. ready for connection, motor control optional 8x adjustable machine feet for alignment Scalloped edge: 50x30mm T-40 Cleat - 300mm pitch 2-layer particularly transversely stable We always have va ...

FOR SALE... 7 SETS-WARTSILA DIESEL 16V25 KW3800 YOB 1998 ENGINE AT TURKEY TO WHOM IT MAY CONCERN; WE VE 2 SETS WARTSILA DIESEL 16V25 KW3800 YOB 1998 ENGINES AT TURKEY PLS FIND ENGINES SPECIFICATION AT BELOW. ENGINE TYPE 16V25 RATED POWER 3800kW RATED SPEED 900r/min ENGINE NO. 3963/4080/4081/4093/4094/4184/4185 ENGINE RUNNING HRS 52200-78000HRS DIRECTION OF ROTATION CLOCKWISE YOB 1998 WE VE ADDATIONALY WARTSILA DIESEL 12V25 ENGINE RATED POWER 2760kW RATED SPEED 900r/min SERIAL NO. 3711 IF YOU'VE ANY FURTHER QUESTIONS PLS DO NEED HESITATE TO CONTACT WITH US. Capt. Ayhan Ugurluba BEST of regards; Aliaga marine services : info/aliagamarine.com PHN/fax: +90 232 618 03 90 Mobile: + 905556084850 aliagamarine.com TURKEY

FOR SALE... WARTSILA DIESEL 12V25 KW2760 YOB 1993 ENGINE AT TURKEY TO WHOM IT MAY CONCERN; WE VE WARTSILA DIESEL 12V25 KW2760 YOB 1993 ENGINE AT TURKEY PLS FIND ENGINE SPECIFICATION AT BELOW. RATED POWER 2760kW RATED SPEED 900r/min SERIAL NO. 3711 MADE IN SWEEDEN CRANKSHAFT STD SIZE MEASURMENT. IF YOU'VE ANY FURTHER QUESTIONS PLS DO NOT HESITATE TO CONTACT WITH US. Capt. Ayhan Ugurluba Best of regards; Aliaga marine services : info/aliagamarine.com PHN/fax: +90 232 618 03 90 Mobile: + 905556084850 aliagamarine.com TURKEY

SOLD! ABC ENGINE 8XDXC 886KW @ 750 RPM diesel engine ABS BJ 2002

TO WHOM IT MAY CONCERN; WE VE 2 SETS COMPLETE WARTSILA DIESEL 16V25 ENGINES AT OUR STOCK. ENGINES ARE IN GOOD WORKING CONDATION. ENGINE CRANK SHAFTS HAS STANDART SIZE HARD MARKING ON IT. ENGINES READY TO INSPECTION AND READY TO TRANSPORT. PLS FIND ENGINES DETAILS ON BELOW TYPE 16V25 ENGINE SERIAL NO. 4062 & 4063 POWER 3230kW RATED SPEED 900 RPM RUNNING HRS 27402 & 24816 YOB 1997 IF YOU HAVE ANY FURTHER QUESTIONS PLS DO NEED HESITATE TO CONTACT WITH US. Capt. Ayhan Ugurluba Best regards; Aliaga marine services E mail: info/aliagamarine.com PHN/fax: +90 232 618 03 90 Mobile: + 905556084850 aliagamarine.com TURKEY

winch rope, crane rope, hoist rope, wire rope, stainless steel rope, forestry winch rope -Manufacturer: DIEPA Drahtseilwerk Dietz, crane rope winch rope Ø 22 mm -Rope type: DIEPA X 43 Ø 22 mm RHOL 1770 with 1 end with full thimble, see photos -Length: 44 m -Number: 4x wire rope available -Price: per piece -also other crane ropes: available -Transport dimensions: Ø 700 x 510 mm -Weight: 120 kg / piece

Diesel combined heat and power plant, CHP, generator set, power generator used DIETER KUNZLER GmbH Generator K-EA-3ST-PAR-SYN-M 500 kVA 400/231 V Synchronous 3x 362 A 50 Hz Mtu 12 V 183 AA 31 MERCEDES OM 424 225 kW 1500 rpm Dimensions unit: approx. 2500 x 1200 x 1500 mm, control cabinet approx. 2400 x 500 x 2000 mm Changes and errors in the technical data, information and prices as well as prior sale reserved.

Diesel combined heat and power plant, CHP, generator set, power generator used DIETER KUNZLER GmbH Year: 1991 Generator 250DMED 250 kVA 400/231 V 3x 362 A 50 Hz Mtu 12 V 183 AA 31 MERCEDES OM 424 225 kW 1500 rpm Container dimensions: approx. 6000 x 2500 x 2500 mm Changes and errors in the technical data, information and prices as well as prior sale reserved.

weight max.: 1600 kg Drive: Diesel motor: Deutz weight: 13,6 t Optionally, spare parts can be purchased. No.: Zch5FZ Machine number 16087001 The tech. Data are manufacturer or operator information and therefore non- binding. We reserve the right to prior sale, Our terms and conditions of sale apply exclusively. About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible by appointment. We look forward to your visit. Your Markus Hirsch Team The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

DIEFFENBACHER PO-F 1250 A hydraulic press was built in Germany in 1981 by J. Dieffenbacher GmbH & Co. The machine was regularly maintained and upgraded throughout its service life. In 2016, a major upgrade was carried out, which included replacing the electrical cabinet, installing light curtains and adding a SIEMENS SIMATIC HMI TOUCH touchscreen operator panel. The piston seals were also replaced and measuring scales were added for precise position measurement of the slider, top ejector and lower die cushion. The DIEFFENBACHER PO-F 1250 A is an extremely versatile hydraulic press for demanding metal forming applications. Its main purpose is die stamping of steel components, calibration of forgings, dogging, hot and cold forging, cold forming and other operations that require very high press forces. All these machining processes are performed with a high press force of up to 1250 tonn ...

pressure: 2000 /1000 t distance between columns: 2650 mm stroke: 500 mm column travel -side: 500 x 1000 mm diameter of piston: 710 mm number of pistons: 2 distance between table / ram: 1000 mm operating pressure: 130 / 230 bar dayligth: 800 mm table length: 2500 mm table width: 1600 mm table height: 250 mm draw back pressure: 500 kN number of T-slots: 8 turning speeds: 1500 U/min rapid speed: 120 - 140 mm/min closing speed: max. 120 - 140 mm/sec. hydraulical ram locking: return of plunger by small single cylinders: 100 - 110 mm/sec cutting sound absorber: 300 t die cushion capacity: 200 t die cushion stroke: 250 mm speed of die cushion: 100 mm/sec voltage: 380 V frequency: 50 Hz quantity of oil: 2000 l total power requirement: 93 kW weight of the machine ca.: 90 t dimensions of the machine ca.: 5000 x 2500 x 7200 mm transport measurements: ca. 6500 x 3750 x 2190 mm 1991 assembly of a di ...

Complete Euro-Diesel S.A. industrial control rack with original electronic control and interface cards. Included in this complete rack: 1× REDBUS EUR-0801 Rev.B rack/backplane 4× Card DIO Ver. 3.04 1× CAN R1 communication card 2× CARTE PSU Ver. 2.3 power supply cards 1× Original metal Euro-Diesel rack Manufacturer: Euro-Diesel S.A. Condition: Used Quantity available: 1 complete rack Location: Delft, Netherlands Removed from an industrial installation. The components have not been individually tested after removal. The rack is sold only as a complete unit. Individual cards are not sold separately. Please see the photographs for the exact configuration, connectors, serial numbers and condition.

Complete Euro-Diesel S.A. industrial control rack with multiple original control, communication, power supply and interface cards. Included in this complete rack: 1× MBCPU R2 rack/backplane 4× ACIN V2.7 cards 2× CARTE PSU Ver. 2.3 power supply cards 1× MONA R1 with Analog Devices AD202JN isolation amplifier 1× INTM Card V3.4 1× CAN R1 communication card 1× RS485 R1 communication card 1× Card DIO Ver. 3.04 1× Original metal Euro-Diesel rack Manufacturer: Euro-Diesel S.A. Condition: Used Quantity available: 1 complete rack Location: Delft, Netherlands Removed from an industrial installation. The components have not been individually tested after removal. The rack is sold only as a complete unit. Individual cards are not sold separately. Please see the photographs for the exact configuration, connectors, serial numbers and condition.

General SKU345S1082 MakeDe Dietrich LocationBarneveld CEcheck Pressure Working pressure1 Bar Vacuum possiblecheck Main Features MaterialGlass Volume540 Ltr. Pressure1 Bar Specified Features - Pressure vessel Capacity540 Ltr. Vessel sizes: dia. 1000x300, conical: dia. 1000x700 cylin. Top connections25 2, 50, 80 Outlet260 mm Max. temperature-10/80 MaterialGlass General No.70981 Year of construction2011 Floorspace1,4x1,4 m Total height1,9 m Weight850 Kg ATEX designedcheckPressure vesselsGeneric medicinesFine chemicalsOther chemicalRubberBiotechnologyPlastic & polymersCatalysts & fillersOther pharmaceuticsCosmeticsAnimal feedAPIDe DietrichTanks > Pressure vesselsIndustries > Pharmaceutical > Generic medicinesIndustries > Chemical > Fine chemicalsIndustries > Chemical > Other chemicalIndustries > Chemical > RubberIndustries > Chemical > BiotechnologyIndustries > Chem ...

General SKU040G127 MakeDe Dietrich TypeRFS—1200 No.54913 Year of construction1984 LocationBarneveld Material Lining materialGlass - Enamel Pressure Working pressure6 Bar Vacuum possiblecheck Number of vertical pressure tanks1 Main Features MaterialGlass Volume1200 Ltr. Pressure6 Bar Vacuumcheck Specified Features - Pressure vessel Capacity1200 l. (1300 l.) Vessel sizesø 1200 x 1400 mm Dished topcheck Dished bottomcheck Manholeø 500 mm Outletø 100 mm Max. temperature—10 / 200 °C MaterialGlass General Floorspace1,4 x 1,4 m Total height2,4 m Weight850 kgPressure vesselsGeneric medicinesFine chemicalsOther chemicalRubberBiotechnologyPlastic & polymersCatalysts & fillersOther pharmaceuticsCosmeticsAnimal feedAPIDe DietrichTanks > Pressure vesselsIndustries > Pharmaceutical > Generic medicinesIndustries > Chemical > Fine chemicalsIndustries > Chemical > O ...

General SKU296N397 LocationBarneveld MakeFa Dietrich Reimelt KG TypeV6563B Main Features MaterialStainless steel Volume1000 Ltr. Motor2.6 KW Specified Features - Conical mixer Pre-mixercheck Capacity1000 l. Vessel sizesDia. 900x1900 mm Vessel diameter900mm Cylindrical height1000mm Conical height900mm Manholecheck Inletdia.110mm OutletDN100 Max. temperature80°C Motor2/2,6 KW, 380 Volt Conical mixers MaterialStainless steel 1.4305 (303), Stainless steel 1.4301 (304) General No.1-941-356 Year of construction1987 Mounted on legscheck Floorspace1,4x1,1 m Total height2,5 m Weight500 kgPowdered foodsGeneric medicinesTea, herbs & coffeeStarchOther chemicalConical mixersAgrochemicalsSpicesPlastic & polymersCatalysts & fillersFeed additivesOther pharmaceuticsSugarAnimal feedOther feedSolid pharmaceuticsDyes & pigmentsMinerals & inorganicDietrich ReimelIndustries > Fo ...

General SKU296N555 LocationBarneveld MakeFa Dietrich Reimelt KG TypeV6563A No.1-841-356 Main Features MaterialStainless steel Volume1000 Ltr. Motor2.6 KW Specified Features - Conical mixer Pre-mixercheck Capacity1000 l. Vessel sizesDia. 900x1900 mm Vessel diameter900 mm Cylindrical height1000 mm Conical height900 mm Manholecheck Inletdia.110 mm OutletDN100 Max. temperature80°C Motor2/2,6 KW, 380 Volt Conical mixers MaterialStainless steel 1.4305 (303), Stainless steel 1.4301 (304) General Year of construction1987 Mounted on legscheck Floorspace1,4x1,1 m Total height2,4 m Weight500 kgPowdered foodsGeneric medicinesTea, herbs & coffeeStarchOther chemicalConical mixersAgrochemicalsSpicesPlastic & polymersCatalysts & fillersFeed additivesOther pharmaceuticsSugarAnimal feedOther feedSolid pharmaceuticsDyes & pigmentsMinerals & inorganicDietrich ReimelIndustries  ...

General SKU345X796 MakeDe Dietrich LocationBarneveld CEcheck TypeSeperator DN200 Pressure Working pressure1 Bar Main Features MaterialGlass Volume47 Ltr. Specified Features - Separator Separatorcheck Separators Capacity47 l. Vessel sizesDia. 200x1600 mm OutletDN40 Max. temperature-20°C/+180°C Specified Features - Separator MaterialBorosilicate Glass 3.3 General No.KHR8365 Year of construction2015 Mounted on legscheck Floorspace0,35x1,70 m Total height0,40 mSeparatorsOils & fatGeneric medicinesBiotechnologyFeed additivesCosmeticsFood additivesLubricants & oleoDairySolid pharmaceuticsBeveragesDyes & pigmentsBiopharmaceuticalAPIDe DietrichCentrifuges > SeparatorsIndustries > Food & Feed > Oils & fatIndustries > Pharmaceutical > Generic medicinesIndustries > Chemical > BiotechnologyIndustries > Food & Feed > Feed additivesIndustries > Chemical > CosmeticsIndustrie ...

General SKU397X1119 MakeDe Dietrich Type525 l. No.23046 Year of construction1993 Mounted on legscheck Pressure Working pressure6 Bar Vacuum possiblecheck Number of vertical pressure tanks1 Main Features MaterialGlass Volume525 Ltr. Pressure6 Bar Specified Features - Pressure vessel Capacity525 Ltr. Vessel sizesø 800x1100 mm Dished topcheck Dished bottomcheck Top connectionsDN50 OutletDN25 Max. temperature-10 / 200 °C MaterialGlass - Enamel General LocationBarneveld Floorspace1,20x1,00 m Total height1,85 m Weight650 kgPressure vesselsGeneric medicinesFine chemicalsOther chemicalRubberBiotechnologyPlastic & polymersCatalysts & fillersOther pharmaceuticsCosmeticsAnimal feedAPIDe DietrichTanks > Pressure vesselsIndustries > Pharmaceutical > Generic medicinesIndustries > Chemical > Fine chemicalsIndustries > Chemical > Other chemicalIndustries > Chemical > Rubbe ...

General SKU418W1320 MakeDe Dietrich LocationBarneveld TypeSR-250 Pressure Working pressure6 Bar Vacuum possiblecheck Working pressure jacket10 Bar Vacuum possible jacketcheck Main Features MaterialGlass Type of tumble dryerdrum-dryer Volume285 Ltr. Motor0.75 KW Specified Features - Tumbler dryer Double cone tumbler dryercheck Capacity285 Ltr Diameter772mm Cylindrical length344mm Conical length293/168mm Inlet/man hole dia. 400mm Outletdia. 200mm With jacket(90 Ltr) Max. temperature-30/+200°C Motor0,75 KW, 400 Volt (Ex) MaterialGlass - Enamel (3009U) With jacketcheck General No.25394 Year of construction1997 Floorspace2,5x1,2 m Total height2,8 m Weight1700 kg Extra Specificationsthe vacuum arm inside is made of material 2.4951Tumbler dryersPowdered foodsGeneric medicinesStarchBiotechnologyAgrochemicalsCatalysts & fillersFeed additivesOther pharmaceuticsC ...

General SKU397X1074 MakeDe Dietrich TypeZBH5365 LocationBarneveld CEcheck Pressure Working pressure1 Bar Vacuum possiblecheck Main Features MaterialGlass Volume750 Ltr. Pressure1 Bar Specified Features - Pressure vessel Closed vertical tankcheck Capacity750 l. Vessel sizesDia. 1000x1050 mm Dished bottomcheck OutletDN50 Max. temperature-30°C/+170°C Pressure vessels MaterialGlass - Enamel (3009) General No.75628 Year of construction2018 Mounted on legscheck Floorspace1,00x1,00 m Total height1,75 m Weight650 kgPressure vesselsGeneric medicinesFine chemicalsOther chemicalRubberBiotechnologyPlastic & polymersCatalysts & fillersOther pharmaceuticsCosmeticsAnimal feedAPIDe DietrichTanks > Pressure vesselsIndustries > Pharmaceutical > Generic medicinesIndustries > Chemical > Fine chemicalsIndustries > Chemical > Other chemicalIndustries > Chemical > RubberIndustrie ...

General SKU311X483 MakeDe Dietrich TypeAE 100 No.68858 Year of construction2007 LocationBarneveld Pressure Working pressure6 Bar Vacuum possiblecheck Working pressure jacket6 Bar Vacuum possible jacketcheck Main Features MaterialGlass Volume100 Ltr. Motor1.1 KW Specified Features - Glass-lined Reactor Reactorcheck Capacity102 l. + 25 l. Vessel sizesø 600 x 600 mm Dished bottomcheck Top connectionscheck Outletø 80 mm Max. temperature—25 / 170 °C With propellor stirrercheck Motor1,1 kW (400 V 1500 rpm, (Ex)) Speed mixing shaft192 rpm With jacketcheck Glass Reactors MaterialGlass - Enamel (3009U) General Floorspace1,00x1,00 m Total height2,40 m Weight790 kg CEcheckGlass-lined ReactorsGeneric medicinesOintmentsFine chemicalsOther chemicalBiotechnologyOther pharmaceuticsCosmeticsSolid pharmaceuticsBiopharmaceuticalAPIDe DietrichReactors > Glass-lined Re ...

General SKU397X1148 MakeDe Dietrich LocationBarneveld CEcheck TypeSTA 500 Pressure Working pressure6 Bar Vacuum possiblecheck Working pressure jacket6 Bar Main Features MaterialGlass Volume500 Ltr. Motor4 KW Specified Features - Glass-lined Reactor Reactorcheck Capacity500 Ltr. (695 Ltr.) Vessel sizesø 1000 x 1060 mm Dished bottomcheck Dished top sidecheck Manhole300x400 mm Top connectionscheck Outletcheck With jacketcheck Max. temperature— 10 / 200 °C With propellor stirrercheck Motor4 kW (400 V 1420 rpm (Ex)) Speed mixing shaft98 rpm With jacketcheck Glass Reactors MaterialGlass - Enamel (3009) General No.54020 / 71431 Year of construction1982 / 2011 Mounted on legscheck Floorspace1,3 x 1,3 m Total height2,74 m Weight2000 kgGlass-lined ReactorsGeneric medicinesOintmentsFine chemicalsOther chemicalBiotechnologyOther pharmaceuticsCosmeticsSolid p ...

General SKU397X1149 MakeDe Dietrich LocationBarneveld TypeSTA 500 Pressure Working pressure6 Bar Vacuum possiblecheck Working pressure jacket6 Bar Main Features MaterialGlass Volume500 Ltr. Motor4 KW Specified Features - Glass-lined Reactor Reactorcheck Capacity500 Ltr. (695 Ltr.) Vessel sizesø 800 x 1060 mm Dished bottomcheck Dished top sidecheck Top connectionscheck OutletDN80 With jacket(135 Ltr.) Max. temperature—10 / 200 °C With propellor stirrercheck Motor4 kW 400 V 1420 rpm (Ex) Speed mixing shaft98 rpm With jacketcheck Glass Reactors MaterialGlass - Enamel (3009U) General No.58632 Year of construction1991 Mounted on legscheck Floorspace1,1 x Total height1,06 m Weight1600 kg Technical specs Extra information135 Ltr. 6 bar —10 / 200 °CGlass-lined ReactorsGeneric medicinesOintmentsFine chemicalsOther chemicalBiotechnologyOther pharmaceuti ...

General SKU208X043 MakeWurm Dietzel TypeUnknown Year of constructionUnknown (missing type plate) Mounted on framecheck Pressure Working pressure8 Bar Main Features MaterialChromed steel Motor18.5 KW Surface8.72 m2 Length2800 mm Specified Features - Roll dryer Roll dryercheck Rolls chromium platedcheck Roll surface8,72 m² Roll sizesø 991 x 2800 mm Steam heatingcheck Max. temperature100—175 °C With knife dischargecheck Motor18,5kW, 400/690V, 1460rpm Roll speed3—9 rpm With jacketcheck Roll dryers Rotating drum dryercheck Adjustable drum inclinationcheck Specified Features - Roll dryer MaterialCast Iron Hard Chromium General LocationBarneveld With switchgear(as is) Floorspace1,0x2,8 m Total height2,8 m Extra Specificationsvolume: 1900 lequipped with 2 steel application rollers and 2 lined rollersdischarge with scraperPowdered foodsStarchBiotechnology ...

General SKU411S991 LocationBarneveld Main Features MaterialChromed Motor11 KW Surface6.28 m2 Specified Features - Roll dryer Roll dryercheck Double rollcheck Roll surface6,28 m² Roll sizesdia. 1000x2000 mm Steam heatingcheck With knife dischargecheck Motor11 kW, 500 Volt Roll speed2-8 rpm With jacketcheck MaterialCast iron, Cast Iron Hard Chromium, Rubber With jacketcheck General MakeGeorg Dietzel (D) TypeEA 630 Extra SpecificationsSmall roll: dia. 210x2000 mm, area: 1.3 m², material: 1.1830, rubberizedSpare rollPowdered foodsStarchBiotechnologyRoll dryersFeed additivesCosmeticsFood additivesSugarDairyDyes & pigmentsAPIGeorg DietzelIndustries > Food & Feed > Powdered foodsIndustries > Food & Feed > StarchIndustries > Chemical > BiotechnologyDryers > Roll dryersIndustries > Food & Feed > Feed additivesIndustries > Chemical > CosmeticsIndustries > Food & Feed > Foo ...

General SKUR1166 MakeDe Dietrich &: CIe (FR) Type1000 Ltr No.22014 Year of construction1990 LocationBarneveld Pressure Working pressure3.2 Bar Vacuum possiblecheck Working pressure jacket7 Bar Main Features MaterialGlass Volume1000 Ltr. Pressure3.2 Bar Vacuumcheck Specified Features - Pressure vessel Capacity1240 Ltr (nett.1000 Ltr) Vessel sizesdia. 1000mm x1810mm Dished topcheck Dished bottomcheck With covercheck Top connectionsDN200 (2x), DN100 (2x), DN80 (2x) OutletDN80 Max. temperature-30/120 Degr. C. With jacket(82 Ltr) Max. temperature-30/120 Degr. C. With propellor stirrercheck Motor0.75 kW, 230/400 Volt (EX) Speed mixing shaft317 rpm MaterialGlass - Enamel (3009) With jacketcheck General Floorspace1,4x1,4 M Total height2,8 M Weight1500 Kg ATEX designedcheckPressure vesselsGeneric medicinesFine chemicalsOther chemicalRubberBiotechnologyPlastic  ...

General SKUR1212 MakeDe Dietrich &: Cie (CH) Type3425 No.18912 Year of construction1985 Mounted on legscheck Pressure Working pressure3.2 Bar Vacuum possiblecheck Main Features MaterialGlass Volume3400 Ltr. Pressure3.2 Bar Vacuumcheck Specified Features - Pressure vessel Capacity3425 Ltr (nett.2500 Ltr) Vessel sizesdia.1600mm x1970mm Dished topcheck Dished bottomcheck ManholeDN500 Top connections2x DN200, 4x DN80 OutletDN80 Max. temperature100 degr.C. With propellor stirrercheck Motor1.3 KW, 380 Volt (EX) Speed mixing shaft915 rpm MaterialGlass - Enamel General LocationBarneveld Floorspace2,5x2,3 M Total height2,3 M Weight1600 Kg ATEX designedcheckPressure vesselsGeneric medicinesFine chemicalsOther chemicalRubberBiotechnologyPlastic & polymersCatalysts & fillersOther pharmaceuticsCosmeticsAnimal feedAPIDe DietrichTanks > Pressure vesselsIndustries > Pha ...

General SKUR0820 MakeDe Dietrich &: Cie (FR) Type3425 Ltr. No.55320 Year of construction1985 Mounted on legscheck Pressure Working pressure3.2 Bar Vacuum possiblecheck Main Features MaterialGlass Volume3425 Ltr. Pressure3.2 Bar Vacuumcheck Specified Features - Pressure vessel Capacity3425 ltr Dished topcheck Dished bottomcheck Manholeinspection door dia. 500mm Top connectionsdia. 80mm (4x). dia. 200mm (2x) Outletdia. 80mm Max. temperature100 degr.C With propellor stirrercheck Motorcheck MaterialGlass General LocationBarneveld Floorspace2,4x2,0 M Total height2,3 M Weight1450 KgPressure vesselsGeneric medicinesFine chemicalsOther chemicalRubberBiotechnologyPlastic & polymersCatalysts & fillersOther pharmaceuticsCosmeticsAnimal feedAPIDe DietrichTanks > Pressure vesselsIndustries > Pharmaceutical > Generic medicinesIndustries > Chemical > Fine chemicalsIndustr ...

General SKU296N396 MakeFa.Dietrich Reimelt KG LocationBarneveld Type1-941-356 Main Features MaterialStainless steel Volume1000 Ltr. Motor2.6 KW Specified Features - Conical mixer Pre-mixercheck Capacity1000 l. Vessel sizesDia. 900x1900 mm Vessel diameter900mm Cylindrical height1000mm Conical height900mm Manholecheck Inletdia.110mm OutletDN100 Max. temperature80°C Motor2/2,6 KW, 380 Volt Conical mixers MaterialStainless steel 1.4305 (303), Stainless steel 1.4301 (304) General No.V6563D Year of construction1987 Mounted on legscheck Floorspace1,4x1,1 m Total height2,5 m Weight500 kgPowdered foodsGeneric medicinesTea, herbs & coffeeStarchOther chemicalConical mixersAgrochemicalsSpicesPlastic & polymersCatalysts & fillersFeed additivesOther pharmaceuticsSugarAnimal feedOther feedSolid pharmaceuticsDyes & pigmentsMinerals & inorganicDietrich ReimelIndustries > Fo ...

General SKU322X558 MakeDe Dietrich LocationBarneveld Pressure Working pressure6 Bar Vacuum possiblecheck Working pressure jacket6 Bar Vacuum possible jacketcheck Main Features MaterialGlass Volume630 Ltr. Motor3 KW Specified Features - Glass-lined Reactor Reactorcheck Capacity630 l. (847 l.) Vessel sizesø 1000 x 900 mm Dished bottomcheck Dished top sidecheck ManholeDN250 Outletø 100 mm With jacketcheck Max. temperature- 25 / 200 °C With propellor stirrercheck Motor3 kW (400 V, 1430 rpm (Ex)) Speed mixing shaft± 150 rpm With jacketcheck Glass Reactors MaterialGlass - Enamel (3009) General No.61859 Year of construction1997 Floorspace1,60 x 1,60 m Total height3,0 m Weight1650 kgGlass-lined ReactorsGeneric medicinesOintmentsFine chemicalsOther chemicalBiotechnologyOther pharmaceuticsCosmeticsSolid pharmaceuticsBiopharmaceuticalAPIDe DietrichReactors > G ...

General SKU397X1162 MakeDe Dietrich TypeAE1600 LocationBarneveld CEcheck Pressure Working pressure6 Bar Vacuum possiblecheck Working pressure jacket6 Bar Main Features MaterialGlass Volume1600 Ltr. Motor5.5 KW Specified Features - Glass-lined Reactor Reactorcheck Capacity1600 l. (2316 l.) Vessel sizesø 1400 x 1800 mm ManholeDN350/450 Top connectionscheck OutletDN100 Max. temperature—10 / 200 °C With anchor stirrercheck Motor5,5 kW 400 V, 1500 rpm (Ex) Speed mixing shaft40 rpm With jacketcheck Glass Reactors MaterialGlass - Enamel (3009U) General No.54544 / 75109 Year of construction1984 Floorspace1,9 x 1,9 m Total height2 m Weight4500 kgGlass-lined ReactorsGeneric medicinesOintmentsFine chemicalsOther chemicalBiotechnologyOther pharmaceuticsCosmeticsSolid pharmaceuticsBiopharmaceuticalAPIDe DietrichReactors > Glass-lined ReactorsIndustries > Pharmace ...

General SKU297W567 LocationBarneveld MakeDe Dietrich TypeCE 8000 Pressure Working pressure6 Bar Vacuum possiblecheck Working pressure jacket6 Bar Main Features MaterialGlass Volume8000 Ltr. Specified Features - Glass-lined Reactor Reactorcheck Capacity8000 l (9380 l) Vessel sizesDia. 2200x2700 mm Dished bottomcheck ManholeDN600 Top connectionscheck OutletDN150 With jacketcheck With propellor stirrercheck Without motorcheck With jacketcheck Glass Reactors MaterialGlass - Enamel (3009) General No.59877 Year of construction1993 Floorspace2,40 x 2,40 m Total height4,10 m Weight9100 kgGlass-lined ReactorsGeneric medicinesOintmentsFine chemicalsOther chemicalBiotechnologyOther pharmaceuticsCosmeticsSolid pharmaceuticsBiopharmaceuticalAPIDe DietrichReactors > Glass-lined ReactorsIndustries > Pharmaceutical > Generic medicinesIndustries > Pharmaceutical > Ointment ...