cylinder head machine used for sale

Hagesana Cream Blower  Type: Cream King SF20 Year of construction 2001 Stainless steel boiler digital control with compressed air Emergency Off Switch Height: 130cm Width: 80cm Depth: 56cm

Glimek Dough Weigher Year of construction 2004 approx. 300-1200gram 1 chamber with large funnel with flourer Height: 180cm Width: 150cm Depth: 70cm

Thread cutting machine, pipe thread cutter -for: Pipe size max. 2 inches -Cutting jaws: 1 inch -Drive: via 3 gearboxes -Dimensions: 550/360/H240 mm -Weight: 55 kg

Thread cutting machine, pipe thread cutter -for: Pipe size max. 2 inches -Cutting jaws: 2 inch -Drive: via 3 gearboxes -Dimensions: 550/360/H240 mm -Weight: 55 kg

Clipping machine Technopack KDCVT 200 Type: KDCVT 200 Dimensions: 100x60x190cm Maximum closing diameter: 120mm Delivery time: 30 working days after advanced payment

Single head Floor model with foot pedal heavy design adjustable side stops Several paper drills Drill holder 380 volts / 0.55 kW / 1.7 A

checked & cleaned double head standing model - foot pedal operated heavy duty construction adjustable side rulers several paper drills drilling chuck drill diameter 3 - 20 mm hole distance min 55mm / max 430mm required tools 380 Volt / 0,55 kW / 1,7 A

Double head Standing model with hand lever adjustable side stops Several paper drills fixed hole spacing standard 80 mm

Machine vice, sturdy vice, drill press vice -Vise: rotatable -Jaw width: 200 mm -Clamping depth: max. 245 mm -Dimensions: 550/370/H195 mm -Weight: 80 kg

Grinding machine, angle grinder, lathe tool grinding machine, thread drill grinding machine, milling cutter grinding machine -Angle adjustment -grinding device -Disc: Ø 190 mm -Drive: 0.2 kW -Speed: 2800 rpm -Dimensions: 700/700/H1400 mm -Weight: 275 kg

The NEW CNC grinding VERECO RG 700/8500 is designed for the batch production of bench pins and connecting rod pins of crankshafts in a fully automatic cycle, or, for the production of individual parts in manual. It operates by means of a mobile grinding wheel unit both on the X axis and on the Z axis: this allows the grinding of different diameters in a single positioning of the piece. MAIN TECHNICAL FEATURES: Distance between tips: 8500 mm Drill height: 800 mm Maximum rotating Ø: 1600 mm Maximum weight of the balance piece: 10,000 kg Maximum grinding wheel dimensions (with recesses): 1600x900x160 mm Approximate machine weight: 98.000 kg NB: The aforementioned technical data, collected from the technical data sheet of the manufacturer, are to be considered non-binding and subject to change without notice. NUMERICAL CONTROL The Siemens 840 D electronic numerical contro ...

Slicer Bizerba VS 8, Connection 230V, weight approx. 44kg, good used condition, works perfectly several in stock

Ayen Knothole Drilling Machine ED 08-4, Machine No.:270 316, 0,6kW, 380volt, 1420 rpm,

Diamond core drilling machine, core drilling machine -3x: drill stand -Max. Drilling capacity: Ø 60 mm -drilling depth: max. 400 mm -Drive: 1050 W -Speeds: 1500/3000 rpm -Core drill: Ø 18/24/29 mm -Sale: only complete -Weight: 70 kg

Thread cutting machine, pipe thread cutter -for: Pipe size max. 2 inches -Cutting jaws: 1 inch -Drive: via 3 gearboxes -Dimensions: 550/360/H240 mm -Weight: 60 kg

Grinding range: approx. 130 x 255 mm Grinding speed: 2800 rpm Table size: 150 x 300 mm Drive motor: 380 V, 1.5 kW Space requirement: 750 x 700 x 1700 mm Weight: approx. 380 kg Pot disc Ø: 180 mm

We can offer you 4x Barmag FK6-1000V texturing machines, manufacture year 2014, 288 spindles, pneumatic yarn pusher, PU discs,airjet, unitens. Very good condition, price $215000/set FOB China.

Notching milling machine -automatic hydropneumatic milling feed -for milling cutters max.: Ø 250 mm

We have 2 Barmag FK6-1000V texturing machines, double friction unit, manufactured in 2014, 2x240 spindles. individual morter friction units, pneumatic yarn pusher, double W2 roller, Barmag unitens, A,B side individualm control, very good machines. price $300000/set FOB China. We also have 1 Yuejian YJ-1000 double friction texturing machine available for sale, manufactured in 2018, 2x 288 spindles, double W2 roller, PU disc, airjet, A,B side individual control, shaft drive, very good condition. price $200000 FOB China

Filter tape rakes

MHME twin lane decorer / florette machine - used for broccoli In good working condition

SPECIFICATIONS: TRUMPF TruLaser 2525 - 4 kw (formerly Trumatic L 2530 plus) Working range: 2,500 x 1,250 x 115 mm Control: Siemens Sinumerik 840 D Laser power: 4,000 watts sheet thickness of mild steel: 20 mm sheet thickness stainless steel: 15 mm sheet thickness aluminium: 10 mm STANDARD: - Closed machine frame with integrated laser unit - TFT color screen - Position laser diode - Spraying device - Motion unit for high-precision machining - Additional highly dynamic axis Yp - Drives with maintenance-free three-phase servo motors - Closed beam guidance - Conveyors for small parts and waste - NitroLine - FlyLine - Penetration detection TRUMPF LASER: - CO2 laser TruFlow 3200 - High frequency excitation - Maintenance-friendly turbo radial blower - Gas mixer (integrated) - Laser power control - Logbook function laser CUTTING HEAD: - Laser cutting  ...

Continuous vacuum filler for straight filling and portioning Hopper inlet 100 mm diameter Integrated vacuum pump Integrated lift Electric power: 9.5 KW Machine dimensions in cm: Width: 175 Length: 140 Height: 205 Delivery time: 20 working days after advanced payment

Clamp welding machine, foil welding machine -Connection: 220 V -Working width: 300 mm -Weight: 10 kg

Continuous vacuum filler for straight filling and portioning All in one 250 liter hopper with counter arm and reinforced scraper, tipping, and hopper lock Hopper inlet 100 mm diameter Integrated vacuum pump Integrated lift Standard double screw housing Machine dimensions in cm: 200x120x200 Delivery time: 10 working days after advanced payment

Machine vice, vise -Jaw width: 250 mm -Jaw height: approx. 80 mm -Clamping depth: max. 310 mm -Weight: 120 kg

Year: ca. 2001 Serial No. R11/47, Roundpile Feeder with Overhead Digital Panet, HSS Gluing System, 1st Station: 4 Pockets, 2nd Station: 4 Pockets, 3rd Station: 2 Pockets, MBO X Mobile Knife for 32 Pages, Pressing Delivery

Two-station machine for articles up to 5 ltr. Extruder 90/24D, quadruple head 4 x 45 mm center to center. Clamping force 83 kN. 460V 60 Hz Good condition

Counter holder, counter bearing, bearing block, pillow block, bearing for milling machine -Dovetail: 118 by 160 mm 32 mm high -Drawing with the photos -Number: 1x counter bearing available -Price: per piece -Dimensions: 340/95/H220 mm -Weight: 15.4 kg

Table milling machine, table milling machine -Spindle: comes from a Lubimez bench milling machine -Table milling machine: with rigid spindle -Dimensions: 800/800/H400 mm -Weight: 95 kg

Single-station machine for articles up to 5 ltr. Extruder 80/24D, double head 160 mm center to center. Trim cutting in the machine. 460V 60 Hz Good condition

In 2020, the machine was extensively overhauled for 7000 €. Proof available. Processes: - Chamfering 60° - Longitudinal turning up to a maximum of 40 mm - Centering drilling Workflow fully automatic: - Tensioning, feeding to - Rapid traverse forward - Work feed - Dwell time for cutting - Rapid traverse back - Relax, feed on Specifications: workpiece diameter approx. 80 mm workpiece diameter 6kt-SW 70 mm min. workpiece diameter round and 6kt 10 mm min. workpiece length 450 mm Speed range infinitely variable Level I/Stage II = 51-306/102-612 Electrical equipment 220/380 V, 50 Hz Motor power main motor kW 1.3/1.8 Engine power Coolant motor kW 0.07 Required air pressure 6-8 bar Weight approx. 520 kg Dimensions: L 1520 mm x W 610 mm x H 1350 mm Roller conveyor

FOR SOFT DOUGH

VACUM DIVIDER

CLIPPER

small handy machine from Swabia

very well preserved automatic machine with/without motor reel

Counter holder, counter bearing, bearing block, pillow block, bearing for milling machine -Swallowtail: 75 by 110 mm 25 mm high -Drawing with the photos -Dimensions: 215/70/H200 mm -Weight: 10 kg

SMT Lathe 80001350 The machine was designed and manufactured to produce rotor shafts for power tools. The machine is designed and manufactured to perform the following operations automatically. - Load/unload parts automatically from/to tool carrier line with a pick-up & placement unit between the shaft ends. - Rotate ring seat + flat rotate commutator + rotate commutator. - Ring mounting - Commutator side - Ring mounting - Drive wheel side The machine has several production programs to produce different parts. Each program uniquely corresponds to a wave type Specifications Anchor wavelength from up to 92.5 - 163.1 mm Bearing pin diameter commutator side 8; 10; 12.5 mm Drive side 12; 8 mm Min. Available length bearing position 3.6 mm Package diameter 52; 55; 59 mm Ring dimensions Outer diameter 40 - 57.4 mm Inner diameter 37.4 - 56 mm Ring width 4 - 8 mm R ...

This belling machine from Thyssen Nothelfer is a very complete line. The line is disassembled and has a throughput of up to 10m pipe length. – Brand: Thyssen Nothelfer – Year built: 1996 – Max. tube Ø: 500mm

Wölco Lupo VPAB-53 labelling system Fully automatic labeling machine for professional labeling Broadband Multi-Labeler Manufacturer: Wölco Masch. Type: Lupo VPAB-53 YOC 2011 Connection: 400V Current 3 x 16 A Power: 2.5 kW Air: 6 bar Broadband Multi-Labeler Wölco Lupo VPAB-36 Manufacturer: Wölco Masch. Type: Lupo VPAB-36 YOC 2011 Connection: 400V The Lupo VPAB-36 is the ideal device for permanent industrial operation when precise and variable label printing with position-accurate application is required. Sato Printer S84 ex Label Printing System The SATO S84-ex/S86-ex printer is a very powerful, automated label printing system with a user-friendly design and a wide range of functions. This printer with its solid Design is designed for continuous operation. The main features of the printer are: • Two-color LCD backlight and two-color status LED ...

Bluhm Weber Legi-Air 4050S Labeling Machine 4.14.1 Basic structure The system is designed as a closed aluminium profile frame and has a very compact design. The control cabinets are integrated in the lower part of the frame. The main valve terminal is located behind a service door below the control panel. The facility includes four workplace stops. Operation is via a touch screen. The control panel is mounted on the right side of the frame. In the station, a labeling system from Bluhm Weber is used, here the documentation of the company Bluhm applies accordingly. 4.14.2 Functional sequence - The retracting workpiece carriers with IO modules are stopped, excavated (positioned) and contacted in the substations 10.1 or 10.2. In these two stations erf - In substation 10.3, the IO modules are automatically labelled. The generation of the labels and their content ...

With the device, upper and lower parts were previously joined together and pressed. Components are Kuka Scara KRC2sr Robot BJ 2010 Pneumatic control Electrical control with frequency converter 4 conveyor belts Description Robotor Type KR 5 scara R350 Working space volume KR 5 scara R550-Z320: 0.264 m3 Repeatability (ISO 9283) KR 5 scara R350: ±0.015 mm Reference point Working space Intersection of axes 3 and 4 Weight approx. 20 kg Datalatt Robot

mobile sword folding unit

Foil wrapping machine with shrinking tunnel manufacturer: Gramegna type: Champion year of manufacturing: 2000 capacity: up to 7.000 bph for wrapping PET bottles into foil and shrinking afterwards

UV curing machine The product is a system designed for curing silicone. Due to the UV curing, the machine can probably also be used elsewhere. Manufacturer: Hereaus Curing: UV curing Operating voltage: 400 V Control voltage: 24 V Rated current: 16 A Fuse: 25 A Frequency: 50 Hz Year of construction: 2017 Among other components used: Heraeus P300MQ Motori Elettrici 71M/2 engine Condition: used Complete plant closure, large selection of mezzanines, pallet racks, shelves, paternosters. High-quality industrial machines, lathes, grinding machines, manual machines

Arburg 420C-1000-350 (174) with challenge tape Item number: 174 Availability: In stock Year of construction: 2001 Brand: Arburg Specifications Spray weight: 210 g Clamping force: 1,000 kN Screw diameter: 45 mm Spray pressure: 1670 bar Spar spacing: 420x420 mm Clamping plate size: 570x570 mm Tool installation height min.: 250 mm Control: Selogica Language: German Power: 32.2 kW Operating hours: 89,240 h Weight: 3430 kg Dimensions: 4.4x1.7 m Funnel: No Core train: Yes Euromap: Yes Air valve: Yes

TOOLMET GATO GC-G-M-2040 oxy-fuel cutting machine was built in 2020 in Poland by Toolmet Sp. z o.o. This extremely efficient machine is an excellent choice for businesses placing emphasis on high accuracy and repeatability of the produced parts. It enables precise, 4-axis shape cutting of workpieces made of thick steel sheets. The machining process is performed fully automatically by means of a reliable gas torch according to pre-programmed cutting programmes. The work table with a length of 4000 mm and width of 2000 mm is equipped with a sectional extraction system with 6 pneumatically controlled sections. This solution effectively eliminates any contamination generated during the cutting process, ensuring a high level of safety and great user comfort. In order to guarantee smooth movements and high positioning accuracy, a lubrication-free drive system and powerful servo motors in all l ...

DMG MORI NRX 2000™ CNC Lathe TECHNICAL FEATURES: Year: 2017 NC Type: MITSUBISHI M730UM Maximum diameter Machinable: 150 [mm] X-axis travel: 100 [mm] Z-axis travel: 220 [mm] X1 Axis Fast Feed Speed: 30000 [mm/min] Fast feed speed X2 axis: 30000 [mm/min] Z1 axis fast feed speed: 30000 [mm/min] Z2 axis fast feed speed: 30000 [mm/min] Spindle Nose: JIS A2-5 Maximum length Machinable Spindle 1: 100 [mm] Maximum length Machinable Spindle 2: 100 [mm] Maximum speed Spindle 1: 6000 [rpm] Maximum speed Spindle 2: 6000 [RPM] Turret Turning Tool Power 1: 1.5 [kW] Turret 2 rotating tool power: 1.2 [kW] Number of posts - Turret 1 : 10 Maximum speed Rotating Tools - Turret 1: 10000 [RPM] Number of posts - Turret 2: 10 Maximum speed Rotating Tools - Turret 2: 10000 [RPM] Installed power: 38 [kVA] Supply voltage: 400 [V] Working time: 12270 [h] Weight: 5700 [Kg] EQUIPMEN ...