cylinder block used for sale

Key data: 2400 KW, 400 V

CHP Power Plant with 2 x CAT 1.2 MW / 50Hz Gas Generators – 2013 Complete, well maintained Combined Heat and Power plant build in year 2013 by local CAT dealer with two CAT G3516C gas engine driven generators coupled with heat recovery systems for hot water production. The plant was in operation till mid 2016 and currently installed and powered. Heat recovery systems have two circuits, one for engine jacket water and second stage of charge air cooler and another circuit for the first stage of charge air cooler and exhaust gas heat recovery. Exhaust gas tubular heat exchangers have exhaust gas by-pass option. Total accumulated operating hours are 16000 and 19000 hours only. Engines has been serviced by a local CAT dealer in accordance with maintenance manual and they haven’t had any major breakdowns. Engine control system is standard CAT model with Siemens logic, switchgears and s ...

Key data: 65 KW, 400 V

Buderus Gas Generator (CHP) E 0826 DN-60 Gas electricity and heat generator from 1998 with 41,972 operating hours, closed unit, generator with voltage fluctuations. 1 available 65 KWel x 1,500 rpm, 400 V/50 Hz. Manufacturer: Buderus Model No.: E 0826 DN-60 Type: Gas CHP Serial number: 03198-00020-283 Power [KWel]: 65 Power [KWth]: 110 Engine: MAN E0826 E301 Year of Make: 1998 Hours: 41,972 Weight unit [kg]: 2,100 Dimensions LxWxH [m]: 3.10 x 1.00 x 1.75

KVM 105x125 Block/Paving stone plant complete 2005. KVM computer control, palletizer system, 2 elevators 18 levels, curing rack system 18 levels, Finger car for wet and dry side, 2300 boards, board turner/stacker, plastic wrapper unit, Haarup 2500 batching plant, Face mix, colour system, 3 Cement silos, Euro pallet dispenser.. The plant is in very good condition and can be seen after appointment. (Video is available) SUPER PRICE! Amexpo Consult, Merkurvej 31, 9370 Hals Denmark Phone: +45 29251017.

Valve block, control block, hydraulic control block, control unit, control valve -Manufacturer: GSL (German Standard Lift), control block for the drive of work platforms -Model code: Valves 4070... see photos -Dimensions: 340/300/H400 mm -Weight: 40 kg

Key data: 800 KW, 400 V

CHP Power Plant 800 kWe with 2xMWM TCG 2016V08 Gas Gensets Good condition and low operating hour 800 kWe / 400 V / 50 Hz combined heat and power (CHP) plant running on natural gas or biogas. The plant was delivered by MWM in 2011 and it operation was closed in 2021. Thermal energy is in form of hot water at 90°C and currently used for district heating purpose. Due to the low amount of biogas, cogeneration plant worked at low capacity (30-40%), and not around the clock. It has a complete gas treatment and mixing system to utilize biogas from landfilling which has 40 – 55 % of CH4. Power generators are installed in two soundproof containers, TEAM Evo WMW power plant control system and all electric switches and control cabinets are installed in separate control room. Heat recovery system is built next to genset containers. Both units have separate cooling radiators for engine cooling ...

Valve block, control block, hydraulic control block, control unit, control valve -Manufacturer: GSL (German Standard Lift), control block for the drive of work platforms -Model Code: Valves 4070... see photos -Dimensions: 340/300/H160 mm -Weight: 38 kg

Key data: 3600 KW, 4600 kVA, 6600 V

We offer a MWM CHP Type: TBG 632 V16 for sale Specifications: Engine: MWM Type: TBG 632 V16 Power: 3600 kW Generator: AVK Power: 4600 KVA Voltage: 6600 V Running hours: 47,000 h Weight: 46,000 kg Scope of delivery: motor plus generator on base frame

ID3532 FC Maschinenbau-Schlüsselbauer-Schindler year/Baujahr 1995/2010 Fully automatic stone finishing system (edge aging, bush hammering, impregnation) Fully automatic stone finishing system for the artificial processing of concrete block surfaces and edges, as well as for impregnation. The special feature of this system is that, unlike conventional processes, only the edges can be aged. Furthermore, the system also allows bush hammering of the stone surface. Fully automatic brick finishing system (stone edge aging, stick planting, impregnation) Fully automatic stone cutting system for the artificial processing of concrete block surfaces and edges as well as impregnation. The special feature of the system is that, in contrast to conventional processes, only the edges can be aged.  In addition, the system also allows the stone surface to be hammered. More details and price ...

Engine Model: Masa 9001Vb Year of manufacture: 1992 Molds: 15 pieces Pallet size: 1400 x 1100 (900 pieces) Packagers -Rekers 1x Machine mixer Skako 0.75 m³ 1x Machine mixer Swissmade 0.5 m³ 2 conveyor belts (11 m)

Chassis, electric motor, DC motor, traction motor, drive motor, steering valve, control block, steering motor -Manufacturer: Sichelschmidt, control block from electric forklift M 1510 V -Base block: Hawe SK 7650-HST3-Rö4 -Dimensions: 210/110/H130 mm -Weight: 4.2 kg

Key data: 163 KW, 200 kVA

We currently offer: Generator set Aggreko Model No.: QSB7-G6 Engine Cummins Generator Stamford Power: 200 KVA / 163 KW Hz 50 RPM 1500 Year of construction 2012 Hours: 14589 Metrics: L: 4.15m H: 2.50m W: 1.15m Weight: 4887 kg You can find more machines on our website. If you have any further questions, please feel free to contact us. Adel e.K. Commercial Vehicles-Construction Machines Car Recycling Machine Dismantling Gottlieb-Daimler Str. 26 D-74831 Gundelsheim Phone: 0049 1796710242

Key data: 504 KW, 630 kVA

We currently offer: GenSet generator set Type: V630GX Engine Volvo Type: TWD 1643 GE Generator Marelli Type: MJB 355 MA4 Power: 630 KVA / 504 KW Generator 680 KVA IP 23 Hz 50 Year of construction 2009 Hours: 7307 Metrics L: 4.65m H: 2.45m B: 1.85m Weight: Empty: 6580 kg / Loaded: 7397 kg You can find more machines on our website. If you have any further questions, please feel free to contact us. Adel e.K. Commercial Vehicles-Construction Machines Car Recycling Machine Dismantling Gottlieb-Daimler Str. 26 D-74831 Gundelsheim Phone: 0049 1796710242

Hardness tester, hardness measuring machine, hardness tester, hardness tester, impact hardness tester, hardness comparison plate, test block, calibration and adjustment plate -Manufacturer: SiB, hardness reference block test block -Type: 199HBW 5/750 -Dimension box: 180/170/H35 mm -Weight: 1.4 kg

Key data: 2500 KW, 10500 V

FOR SALE: Caterpillar G3520H Gas Generator Set (2013) Zero Hours Since Major Overhaul | 2,500 kW Continuous Power Output Maximize operational efficiency and reliability with this prime power, high-capacity industrial generator. This natural gas-powered genset delivers continuous-duty performance and is ideally suited for mission-critical infrastructure, distributed energy systems, and onsite power generation. Technical Specifications: Engine Model: Caterpillar G3520H Generator Set S/N: GFP00117 Manufacture Year: 2013 Power Rating: 2,500 kW / 3,125 kVA (Base Load / Baseload Applications) Fuel Type: Natural Gas Rated Voltage: 10,500 V Frequency: 50 Hz Power Factor: 0.8 (Lagging) RPM: 1500 Rated Current: 172 A Phase Configuration: 3-Phase Connection Type: Wye (Star) Insulation Class: F Excitation Voltage / Current: 50 V / 4.3 A Cooling Sy ...

A complete and automated OMAG paving block production line is available. Components: 1) Drawing plate for Colormix in the hopper. 2) InLine washing system. 3) Drying side Rekers. 4) Handling Rekers. 5) Rekers control system. 6) Rekers fork carriage. 7) Part of the drying chamber racks, as they are load carriers for the building. 8) Board crane as buffer placer and empty boards. 9) Cyklop horizontal strapping. Without strapping and boards. Concrete feed: 2-axis bucket, output with 90x90 paving blocks: 1000-1100/shift, board size: 1000mm/1400mm, max. format size: 1000mm/1400mm. Completely new OMAG control system in 2017. Conversion to proportional valves in 2014. Documentation available. On-site inspection is possible.

Hammer mill / vibratory press for the production of concrete slabs Manufacturer: Plakoma Complete system Vibro press for the production of concrete slabs Manufacturer: Plakoma Complete system

NNP Cheese block cutter Stainless, pneumatic cheese block cutter with stainless outfeed conveyor, max block 350mm w x 200mm h,

Key data: 48 KW, 60 kVA

Number 007 Generator sets Type: K0363 Engine Iveco Generator LeRoy Somer Power: 60 KVA / 48 KW Hz 50 RPM 1500 IP 21 AVR controller RS 437 Year of manufacture 1989 Hours 237 Accessories: Control cabinet Metrics: L: 2.25m H: 1.50m B: 0.70m You can find more machines on our website. If you have any further questions, please feel free to contact us. Adel e.K. Commercial Vehicles-Construction Machines Car Recycling Machine Dismantling Gottlieb-Daimler Str. 26 D-74831 Gundelsheim Phone: 0049 1796710242

Plummer block housings, bearing blocks -Condition: unused -Quantity: 4 pieces bearing block with bearing -Type bearing block: NTN 320 - Bearing type: UC320 -with shaft seal -Bearing: Ø 100 mm -Number: 4x available in storage -Price: per piece -Package dimensions: 550/340/H240 mm -Weight: 43 kg

Used K2M 550 cheese block divider with receiving buffer from Kazbi. Details: K2M 550 portion cutting device. Output product: cheese blocks Length: approx. 500 mm Width: approx. 300 mm Height: approx. 100 mm. Final product: Division into 5: 300x100x100 mm Division into 3: 500x100x100 mm Division into 6: 250x100x100 mm Edge bands with leftover trimming. Functional description: Cheese blocks are placed manually on a driven inlet belt and pushed onto a ramp. The ramp is placed in a horizontal position and the block is centered by a system of lateral pressures. The ram is automatically moved and the block is cut into the appropriate number of bars towards the long side. After cutting is finished, the ram is withdrawn and the ramp is raised to accept the next block. The cut bars go to the second cutting section. If we need to cut the block or long ribbons crosswise, the  ...

Blockrückenfräse (Einkerbmaschine) - Block Back Cutter and Notching machine

Block size press Müro 4x5000A4 WT; cleaned and tested; 1xDryer; Stack increase. Block gluing machine Müro 4x5000/A4 WT; cleaned and checked; 1x dryer; pile elevation.

Machine name: CHP used Manufacturer: Köhler / Ziegler Type: SY 53 GSM Year of Make: 2005 Generator: Leroy Somer Generator Type: LSA44.2S7/4 Generator kW: 132 kVA Turbo: No Fuel Type: Sewage Gas Electrical power: 53 kW Thermal power: 87 kW Drive engine: MAN E0836 E302, 6 cylinders, 56kW Dimensions: L 3,600 x W 950 x H 1,750 mm Curb weight: 2,200 kg Tech. Documentation: Yes Note: The engine was changed in 2013 Condition: Used Price: On request

Machine name: Combined heat and power plant used Manufacturer: Köhler / Ziegler Type: SY 53 GSM Year of Make: 2005 Generator: Leroy Somer Generator Type: LSA 44.27/4 Generator kW: 132 kVA Fuel Type: Sewage Gas Electrical power: 53 kW Thermal power: 87 kW Drive engine: MAN E0836 E302, 6 cylinders, 56 kW Dimensions: L 3600 x W 950 x H 1750 mm Curb weight: 2200 kg Tech. Documentation: Yes Note: The engine was changed in 2013 Condition: Used Price: On request

Steel grinding block, steel grinding machine ULRICH KLINGEL type HSM 4Year of construction approx. 1976with 4 workstationsGrinding wheel diameter: 1x 100; 1x 150; 2x 200 mmGrinding wheel speed: approx. 1400/2800 rpm Motor power: approx. 1 kWNet connection: 380 volts, 50 Hz- 3x swinging grinding table- all 3 workstations with swivelling tables, feeding movement via handwheel- one workstation (the 4th) with swivelling and tilting table, feeding movement via handwheel- 1 piece diamond grinding wheel 100 mm is mounted (heavily worn)- 2 pieces

clamping device, clamping claws, deep clamping jaws, clamping base, clamping tool, step claws, low clamp, clamping iron, step block -Step block: clamping pad for clamping tool, 2 pieces -Clamping width: 50 mm -Price/Delivery: complete -Dimensions: 120/60/H140 mm -Weight: 1.9 kg/piece

clamping device, clamping claws, deep clamping jaws, clamping base, clamping tool, step claws, low clamp, clamping iron, step block -Step block: clamping pad for clamping tool, 4 pieces -Clamping width: 50 mm -Bore: Ø 30 mm -Price/Delivery: complete -Dimensions: 100/60/H45 mm -Weight: 1.0 kg/piece

Hard rock slab, granite slab, granite blockHard stone block, angle block precisely machined on all sidesMeasuring cube, measuring plateLength: 1590 mmWidth: 300 mmHeight: 470 mm- 2 holes 80 mm- 2 holes 120 mm- Threaded bushings mainly M16, some with M12 and M18Weight: 570 kgGood condition; used

Key data: 1094 KW, 1445 kVA, 400 V

Jenbacher Gas CHP C320 GS-B Bio-gas electricity and heat generator from 2006 with 63,868 operating hours, Container with control, exhaust gas heat exchanger, exhaust silencer and cooling. 1 available 1,064 KWel x 1,500 rpm, 400 V/50 Hz. AC generator: Stamford A06H625192, 1,445 KVA Manufacturer: Jenbacher Model: C320 GS-B Type: Bio-Gas CHP Container Serial number: 0204758/002 Power [KWel]: 1,064 Engine: J 320 GS Serial Number: 1237603 Engine power [KW]: 1,094 Year of Make: 2006 Hours: 63,868 Weight gene set [kg]: 11,000 Weight container [kg]: 25,000 Dimensions LxWxH [cm]: 1,220 x 250 x 285 AC Generator Stamford A06H625192 Manufacturer: Stamford Model No.: A06H625192 Type: AC Synchronous Generator Serial number: 0204758/002 Power [KVA]: 1,445 Voltage [V]: 400 Frequency [Hz]: 50 Current [A]: 2,237 Speed [1/min]: 1,500 Year of Make: 2006 Hours: 63,868 Weigh ...

Reversible prism, 1-piece die block for die bending machineBending tool for press brakeReversible prism with 6 different prismsPrism size 30 mm with 3 mm radius for 90, 40 mm with 4.5 mm radius for 90 50 mm with 4 mm radius for 90, 18 mm for 90, 10 mm for 90 12 mm for 45Dimension 90 x 88 mmPrism length 3000 mmWeight 147 kgGood condition; used

Marking prism, test prism, prism, angle prism, clamping angle, clamping prism, clamping cube, prism block -V-block: for marking plate, clamping plate, straightening bench... -Prism width: 240 mm / 120° / 3 holes Ø 7 mm -Dimensions: see photo technical drawing -Dimensions: 225/257/H90 mm -Weight: 25.4 kg

Hard stone slab, granite slab, granite block, measuring cubeHard stone block, angle block precisely machined on all sidesThe granite slab comes from a measuring machineDimensions of the large table surface L x W x H: 1350 x 1000 x 300 mmDimensions of the small table surface L x W: x H: 1350 x 300 x 245 mm- 5 pieces of base blocks with leveling screws approx. 400 mm- 8 pieces of threaded bushings in the table surface with M10 (hole spacing 500 x 250 x 250 x 250 mm)- 4 pieces of threaded bushings M16- small chipping on eggs Top edgeOverall dimensions L x W x H: 1350 x 1350 x 300

12-piece die block for die bending machine GEWAAbending tool for press brake, lower toolType: 0255/14Prism size: 16 mm for 90Prism angle: 88Countersunk depth: approx. 8 mmOverall height: 120 mmmax. Printing capacity per meter: 100 t/mFoot width from the die: 60 mmTotal length: 4175 mmSegment lengths: 4 x 835 mm, 1 x 400 mm, 1 x 200 mm, 1 x 100 mm, 1 x 50 mm, 1 x 40 mm, 1 x 20 mm, 1 x 15 mm, 1 x 10 mmWeight: 110 kgvery good condition; used

load jack, swivel jack, lifting jack, shackle, load jack, lashing eye, lashing ring, attachment point, load jack thread -Load trestles: lashing point -Shaft mount: M42 -Hole spacing: 220/140 x Ø17 mm, see photos -Quantity: 1 piece -Dimensions: 280/190/H200 mm -Weight: 19.9 kg

Container turning device, welding turning device, roller stand -Roller stand: wheels Ø 125 x 35 mm -Roller spacing: 140 mm -Quantity: 1 piece available -Dimensions: 350/80/H170 mm -Weight: 6.6 kg

Key data: 999 KW, 999 kVA, 999 V

Dear Ladies and Gentlemen, We hereby offer the following refurbished MAN replacement gas engines of the E08xx, E28xx or E32xx series. Description: • Refurbished gas engine, refurbished according to recognised quality standards • Complete engine, ready to use • Multi-cylinder V-shaped or in-line engine with water-cooled system • Water-cooled exhaust gas routing Engine versions and power ranges MAN E0834 > 60kW MAN E0836 > 75-100kW MAN E2876 > 190-210kW MAN E2848 > 250-270kW MAN E2842 > 360-400kW MAN E3268 > 350kW MAN E3262 > 530kW Repairs: • Engine block carefully checked, processed and cleaned (incl. sealing surfaces, bearing points and oil channels) • Crankshaft and camshaft checked to standard dimensions, machined and replaced if necessary • Cylinder heads as replacement components, tested and overhauled (incl. valve guides and seat rings) • Conne ...

Vacuum filler bloc BERTOLASO COBERT with 48 filling valves blocked with 8head screw Closermachine, aluminium work direction: right to left year of manufacturing: 1995, with safety housing Siemens S 7 control system CIP able central valve adjustment fixed for one bottle size technical inspected and ready to work

Key data: 305 KW, 380 kVA

We currently offer: Number 71 John Deere generator set Magnaplus Generator Power 380 KVA / 305 KW RPM 1500 Hz 50 Hours: 7033 Year of manufacture 2004 Metrics: L: 3.75m H: 2.60m W: 1.35m Weight: 5 tons The engine of the generator turns, but does not start. You can find more machines on our website. If you have any further questions, please feel free to contact us. Adel e.K. Commercial Vehicles-Construction Machines Car Recycling Machine Dismantling Gottlieb-Daimler Str. 26 D-74831 Gundelsheim Phone: 0049 1796710242

Key data: 48 KW, 60 kVA

We currently offer: No. 008 Atlas Copco generator set Type: QAS60 Engine Perkins 3910/1500 Power 60 KVA / 48 KW Generator LeRoy Somer Hz 50 RPM 1500 IP 23 AVR control R250 Year of construction 2013 dB 87 Connection: 16A, 32A, 63A, socket Operating hours 19532 Metrics L: 2.80m W: 1.15m H: 1.75m Weight: 2130 kg You can find more machines on our website. If you have any further questions, please feel free to contact us. Adel e.K. Commercial Vehicles-Construction Machines Car Recycling Machine Dismantling Gottlieb-Daimler Str. 26 D-74831 Gundelsheim Phone: 0049 1796710242

Paving stone system MASA RECORD 9001 VB with compl. Mixing plant Paving stone plant and finger crane S7, packing line Rekers plc, rest of wet & dry line S5, board size: 1450 x 1100 x 40 mm, Number of boards + - 5000 pieces & 5 molds, max. product height: 14 cm paving stones without the need to adjust the lift/lowering buffer and finger crane. Curbstones up to 1 m in length and 30 cm height can be held between the fingers without adjustment. Board stacks: 1800 boards. 28 boards per stack Curing chamber: Rotho, freestanding Mixing plant: MASA control system Paint mixer: MASA HM 500/750 Main Mixer: Masa HM 2000/3000 Cement silos: 3 silos of 90 m³ and silos of 40 m³ Output per 8 hours: 2000 m² standard paving stones 10.5 x x21 x 8 cm

Key data: 118 KW, 200 kVA, 400 V

Sokratherm Gas CHP GG 110iSI – MAN E2866 E301 Gas electricity and heat generator from 1998, with 21,019 operating hours, with control. 1 available 110 KWel x 1,500 rpm, 400 V/50 Hz. AC generator: Marelli Motori M7B 250 MC 4, 200 KVA Manufacturer: Sokratherm Model: GG 110iSI Type: Gas CHP Serial Number: 808259 Engine: MAN E2866 E301 – 118 KW Electrical power [KWel]: 110 Thermal power [KWth]: 200 Gas capacity [KWgas]: 344 Year of Make: 1998 Hours: 21,019 Weight unit [kg]: 3,320 Dimensions LxWxH [m]: 2.80 x 0.90 x 2.20 AC Generator Marelli Motori M7B 250 MC 4 Manufacturer: Marelli Motori Model: M7B 250 MC 4 Type: AC Synchronous Generator Serial Number: MD-1990 Power [KVA]: 200 Voltage [V]: 400 Frequency [Hz]: 50 Current [A]: 289 Speed [1/min]: 1,500 Year of Make: 1998

Height=1 m, Overall length= 0.9 m, Overall width= 1.25 m, Net weight= 220 kg,

Height=1.34 m, Overall length= 0.73 m, Overall width= 1.39 m, Net weight= 325 kg,

Height=1.22 m, Overall length= 1.1 m, Overall width= 2.16 m, Net weight= 865 kg,

grinding width: 32.0 mm max. dia. of grinding wheel: 250 mm grinding wheel size: 250 x 32 x 32 mm turning speeds: 2850 U/min Grain size: K 36 / K 80 engine output: 1.5 kW voltage: 400 V weight: 30.0 kg range L-W-H: 510 x 320 x 360 mm scope of delivery : - Grinding disc K 36 - Finishing wheel K 80 - Spark protection on both sides - workpiece support The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

RAMATIK - Automatic machine for the production of concrete products on a concrete surface (track). Manufacturer - JOSEF RADINGER – Klagenfurt - Austria Year 2007 The machine is of Austrian origin. Massive construction and very flexible. The wheelbase is 120 cm. It operates on 380 V. The minimum fuse rating is 35 A. The weight of the machine without the model is approximately 5 tons. The machine operates via Hawe hydraulics and electromagnetic valves. The machine was last generally renovated in 2021 It is set via a touch monitor. touch. The program on the screen can be programmed in any language. The machine can be converted into a stable machine because it has an internal table with high-frequency vibrators. The machine includes two sets of vibrators and up to 10 metal molds (models) for concrete blocks, concrete corner blocks and external chimney blocks. The machine ...

Müro 5000/A4 TM block size press; cleaned and tested; insertion width 350mm; Insertion height 520mm; Stack increase for small stacks. Padding press Müro 5000/A4 TM; cleanded and checked; width 350mm; hight 520mm; pile elevation.

SIMATIK - Automatic machine for the production of concrete products on a concrete surface (pista). The machine is of Austrian origin, about 30 years old. Massive construction and very flexible. The wheelbase is 120 cm. It operates on 380 V. The minimum fuse rating is 25 A. The weight of the machine without the model is approximately 4 tons. The machine operates via hydraulics and electromagnetic valves. The machine was last generally renovated in 2022. The complete electricity was replaced, so that the machine can now be operated automatically, semi-automatically or manually. It is set via a touch monitor. touch. The program on the screen can be programmed in any language. Some bearings and seals were also replaced, and the structure was also renovated. The machine includes two sets of Knauer vibrators and hydraulic tongs for palletizing or loading products. We also add fo ...

Key data: 250 KW

MAN gas engine is available with very low hours. Type: E2842E312 Scope of supply: CHP Gas line Control Panel Exhaust gas cooler Enclosed silenced container

Height=1.22 m, Overall length= 0.95 m, Overall width= 0.82 m, Net weight= 521 kg,