cutting used for sale

Torch nozzles, cutting nozzles, flame cutting system, torches, oxyfuel cutting system -Designation: HSD cutting nozzle 6 - 10 mm acetylene 6 bar -Cutting range: 6 - 10 mm -Pressure: 5 bars -Diameter: 19mm -Length: 47mm -Number: 22 pieces available -Total Cost -Total weight: 1.1kg

Torch nozzles, cutting nozzles, flame cutting system, torches, oxyfuel cutting system -Designation: HSD PM -Cutting nozzle 6 - 10 mm 5 bar -Cutting range: 6 - 10 mm -Gas: propane methane -Pressure: 5 bars -Diameter: 19mm -Length: 47mm -Number: 5 pieces available -Total Cost -Total weight: 0.25kg

Torch nozzles, cutting nozzles, flame cutting system, torches, oxyfuel cutting system -Designation: HSD cutting nozzle 6 - 10 mm acetylene 6 bar -Cutting range: 6 - 10 mm -Pressure: 5 bars -Diameter: 19mm -Length: 47mm -Number: 22 pieces available -Total Cost -Total weight: 1.1kg

Torch nozzles, cutting nozzles, flame cutting system, torches, oxyfuel cutting system -Designation: HSD cutting nozzle 6 - 10 mm acetylene 6 bar -Cutting range: 6 - 10 mm -Pressure: 4 bars -Diameter: 19mm -Length: 47mm -Number: 43 pieces available -Total Cost -Total weight: 2.15 kg

Torch nozzles, cutting nozzles, flame cutting system, torches, oxyfuel cutting system -Designation: HSD cutting nozzle 10-20 mm acetylene 6 bar -Cutting range: 10 to 20 mm -Pressure: 5 bars -Diameter: 19mm -Length: 47mm -Number: 24 pieces available -Total Cost -Total weight: 1.2kg

Guillotine shears cutting blade, replacement blade for guillotine shears, replacement blades, cutting blade, scissor blade, tape system cutting device -Manufacturer: Schleicher, cutting device from belt system WV-SYS 160-1050 -Cutting width: max. 500 mm -Number: 1x device available, without partial wiring -Dimension: 900/210/H590 mm -Total weight: 175 kg

Thread cutting head with chaser jaws, thread cutting stock,Tapping machine, pipe thread cutter, cutting head -Thread cutting head: 1/2- 2 -Cutting jaws: R1 -1 1/2 -Dimensions: 870/110/H200 mm -Weight: 11 kg

Thread cutting dies, replacement dies, thread cutting heads with chasers, thread cutting stock, thread cutting machine, pipe thread cutter -various: thread cutting sizes -Price: complete -Weight: 12 kg

WaterJet KIMLA STREAMCUT 3116 build in 2017 in Poland, uses innovative waterjet cutting technology for machining among others steel, plastics and glass. Workpieces with a maximum thickness of 200 mm are cut on an easily accessible working area by the 3D head, programmed in the intuitive KIMLA software with many useful functions. The use of state-of-the-art technology combined with reliable components and a sturdy design guarantee the achievement of clean and precise edges along the entire length of the workpiece, regardless the type of machined material. During its use, the KIMLA 3116 water cutting machine was used to cut rubber using only water and underwent regular maintenance. The total weight of the machine is 2500 kg. Technical specifications of the KIMLA STREAMCUT 3116 water cutting machine - machinable materials: steel, stone, glass, plastics, tiles, etc. - work area dime ...

Hardly used ( year of construction 2021) Metal Band Saw with Swivel Frame from Optimum OPTIsaw S 300DG Specifications Saw blade 2750 x 27 x 0.9 mm Saw blade speed 35 + 70m/min Cutting angle -60 – +45° Cutting range 0° round 255mm Square 190mm rectangle horizontal 190 x 310mm Cutting range -45° round 220 mm Square 190mm rectangle horizontal 135 x 190mm Cutting range -60° round 135mm square 135 mm rectangle horizontal 135 x 135mm Drive power 1.5 KW - 400 Volt Weight 335 kg Dimensions (LxWxH) 1680 x 1600 x 1300 mm Scope of delivery: material stop, bi-metal saw blade, machine base, coolant pump Properties Double mitre up to +45° and -60° Silent operation Heavy-duty cast design High cutting accuracy due to vibration-free operation Ball-bearing saw blade guide Chip brush Automatic shutdown of the saw a ...

SENTE MAKINA PLSS 3X1.5 plasma cutting machine was built in 2015 in Turkey. Distinguished by its ease of use, stable construction and large working area, the machine is used in even the most intensive machining of stainless, galvanised and aluminium sheets. The control panel designed for operating the plasma cutting machine has a specialist CNC controller with the ability of importing programmes in DXF format, which optimises the machining process and ensures economical cutting regardless of the machined material. During its operation, the machine underwent regular servicing and upgrades, during which, among others, the grate was replaced. The SENTE MAKINA plasma cutting machine weighs 980 kg. Technical data of the SENTE MAKINA PLSS 3X1.5 CNC cutting machine - CNC control: SENTE MAKINA - work table dimensions (L x W): 3000 x 1500 mm - grate work area (L x W): 3170 x 1500 mm - plas ...

: neu : ca. 12 Wochen ab Auftrags : Türkei : 211700 € : 4 kW : Wechseltisch : 20 mm : 10 mm : 12 mm : 6 mm : 10 mm : 3060 x 1525 mm : 3060 mm : 1525 mm : 125 (300) mm : 3048 x 1524 mm : 390 kg/m² : 920 kg : 90 m/min : 90 m/min : 127 m/min : 14 m/s² : +/- 0,05 mm : +/- 0,05 mm : 13 s : 19,6 kWh FIBER LASER HESSE HD-FN MADE BY DURMA The HD-FN has two tables which are automatically switched alternately to enable simultaneous cutting and loading/unloading. The shuttle table is positioned longitudinally, which results in the best possible accessibility for optional loading and unloading systems. Control, laser source and cooling are integrated into the machine. The cutting head has automatic focus adjustment. The system consists of the following components: Shuttle table (positioned longitudinally for best possible accessibility for optional loading and unloading systems) Encapsulated cu ...

: neu : ca. 12 Wochen ab Auftrags : Türkei : 174100 € : 3429.77 € : 2 kW : Wechseltisch : 12 mm : 6 mm : 6 mm : 3 mm : 6 mm : 3060 x 1525 mm : 3060 mm : 1525 mm : 125 (300) mm : 3084 x 1524 mm : 390 kg/m² : 920 kg : 90 m/min : 90 m/min : 127 m/min : 14 m/s² : +/ 0,5 mm : +/ 0,5 mm : 13 s : 11,3 kWh FIBER LASER HESSE HD-FN MADE BY DURMA The HD-FN has two tables which are automatically switched alternately to enable simultaneous cutting and loading/unloading. The shuttle table is positioned longitudinally, which results in the best possible accessibility for optional loading and unloading systems. Control, laser source and cooling are integrated into the machine. The cutting head has automatic focus adjustment. The system consists of the following components: Shuttle table (positioned longitudinally for best possible accessibility for optional loading and unloading systems) Encapsul ...

TRUMPF TruLaser 3030 laser manufactured in 2007 in Germany, is the best choice for any production facility. This reliable and highly efficient machine provides excellent laser cutting quality while maintaining low operating costs, thanks to the use of a reliable laser source with the highest energy efficiency. The stable 2 kW laser beam makes the workpiece edges extremely smooth and even after machining. Machining is performed on a high-quality work table with an integrated automatic pallet changing system. This system allows simultaneous loading and unloading of workpieces during the cutting process, resulting in increased production efficiency and significantly reduced machine downtime. The TRUMPF laser cutting machine weighs approximately 11500 kg. Technical data of the TRUMPF TruLaser 3030 laser cutting machine - laser power: 2 kW (2000 W) - feed rate in the X/Y/Z axis: 3104/ ...

The machine is equipped with a Bytrans Cross automatic loading and unloading system. Operating hours: Cutting approx. 16,000h The laser source, the cutting head and the cooling unit have been completely renewed, and have been equipped with the current technology of 2021! These elements have been in operation for approx. 8,000 hours. The machine is currently working in two shifts. BASE MACHINE The basic machine is the basis for the modular BySprint system and consists of the following parts: - a laser source with corresponding laser control, as well as a closed cooling system. - a closed machine frame with controlled sector extraction system - a shuttle table system with exchangeable, pluggable and serrated steel grids - a CNC cabinet with ByVision CNC control system - 2KW fibre laser source YLS, laser power possibly extendable - Small parts and cutting residues that fal ...

: neu : ca. 12 Wochen ab Auftrags : Türkei : 199200 € : 3924.24 € : 4 kW : Manueller Tisch : 20 mm : 10 mm : 12 mm : 6 mm : 10 mm : 3.048 x 1.530 mm : 3048 mm : 1530 mm : 125 mm : 3.048 x 1.524 mm : 127 kg/m² : 90 m/min : 90 m/min : 127 m/min : 14 m/s² : +/- 0,05 mm : +/- 0,05 mm : 6600 kg FIBER LASER HESSE HD-FO MADE BY DURMA The HD-FO is our compact entry-level model. Control, laser source and cooling are integrated into the systemto keep the overall dimensions as small as possible. The manually extendable table is moved out of the side of the machine for loading and unloading. The cutting head has automatic focus adjustment. This makes the system a particularly economical, fast and very easy to operate production machine. The system consists of the following components: Manual loading and unloading table Encapsulated cutting room with protective glazing CNC graphic control with ...

TRUMPF TRUMATIC L3030 laser cutting machine manufactured in 2005 in Germany, provides efficient laser cutting while maintaining low operating costs. To machine workpieces, the machine uses a stable 2 kW laser beam, which, guided by a mirror system, achieves extremely smooth and even edges over the entire cutting length. The head and mirrors are mounted on movable components. The TRUMPF laser cutting machine also boasts an extremely stable and rigid work table with a large surface area, which is additionally equipped with an integrated automatic pallet changing system. This solution allows for simultaneous loading and unloading of workpieces during the machining process, which significantly increases production efficiency and reduces machine downtime to a minimum. All this makes the TRUMATIC L3030 laser ideal for even the most demanding applications in any production facility. The tota ...

BYSTRONIC ByStar L 4025-65 6 kW laser cutting machine built in 2018 in Switzerland is designed for precision cutting of among others carbon steel, stainless steel and aluminium. The machine uses a stable 6 kW laser beam with a thickness of just a few μm to achieve excellent processing results in the form of extremely even and smooth edges along the entire length of the workpiece. The machining process takes place on a rigid work table with a length of 6500 mm and a width of 2500 mm, which ensures high stability even during the most demanding challenges. During its use, the BYSTRONIC ByStar L 4025 laser cutting machine has been continuously serviced and has original parts. The total weight of the machine is 28900 kg. Technical data of the BYSTRONIC ByStar L 4025-65 laser - laser beam power: 6 kW - work table dimensions (L x W): 6500 x 2500 mm - workpiece thickness range (plain stee ...

Thread cutting chuck, thread chuck, tap chuck, thread cutting apparatus -Tapping chuck: thread cutting attachment -Cutting performance: -Recording: MK3 -Bore: Ø 23 mm -Quantity: 3x thread cutting chucks available -Price per piece -Dimensions: Ø 110 x 325 mm -Weight: 8,0 kg/pc.

Carpentry tenon cutting machine Schneider SK A 4 S Swivel Automatic swivel readable via a scale 90 degrees - 30 degrees ( 60 degrees ) Power current Cutting height 450 mm Cutting width 240 mm Cutting depth 360 mm Motor power 3 KW Laser Cutting Display Chassis Top Condition Functionally tested Shipping available at an additional cost

BYSTRONIC BySprint 3015 laser cutting machine was built in 2006 in Switzerland. Designed for even the most intensive machining, the machine uses an extremely stable 3 kW laser beam, whose excellent parameters ensure the highest energy efficiency while maintaining low operating costs. Additionally, in order to meet any production challenges, the process of loading and unloading the workpieces can be performed during the cutting process, which significantly increases production efficiency and reduces machine downtime to a minimum. The offered BySprint 3015 laser cutting machine has been regularly serviced and its total weight is approximately 12000 kg. Technical specifications of the BYSTRONIC BySprint 3015 laser - laser beam power: 3 kW - laser beam power adjustment range: 150 – 3000 W - work area (L x W): 3048 x 1524 mm - maximum sheet metal dimensions (L x W): 3000 x 1500 mm - ...

: neu : ca. 12 Wochen ab Auftrags : Türkei : 183700 € : 3618.89 € : 3 kW : Manueller Tisch : 16 mm : 8 mm : 8 mm : 5 mm : 8 mm : 3.048 x 1.530 mm : 3048 mm : 1530 mm : 125 mm : 3.048 x 1.524 mm : 127 kg/m² : 90 m/min : 90 m/min : 127 m/min : 14 m/s² : +/- 0,05 mm : +/- 0,05 mm : 6600 kg FIBER LASER HESSE HD-FO MADE BY DURMA The HD-FO is our compact entry-level model. Control, laser source and cooling are integrated into the systemto keep the overall dimensions as small as possible. The manually extendable table is moved out of the side of the machine for loading and unloading. The cutting head has automatic focus adjustment. This makes the system a particularly economical, fast and very easy to operate production machine. The system consists of the following components: Manual loading and unloading table Encapsulated cutting room with protective glazing CNC graphic control with to ...

: neu : ca. 12 Wochen ab Auftrags : Türkei : 196200 € : 3865.14 € : 3 kW : Wechseltisch : 16 mm : 8 mm : 8 mm : 5 mm : 8 mm : 3060 x 1525 mm : 3060 mm : 1525 mm : 125 (300) mm : 3048 x 1524 mm : 390 kg/m² : 920 kg : 90 m/min : 90 m/min : 127 m/min : 14 m/s² : +/- 0,05 mm : +/-0,05 mm : 13 s : 17,5 kWh FIBER LASER HESSE HD-FN MADE BY DURMA The HD-FN has two tables which are automatically switched alternately to enable simultaneous cutting and loading/unloading. The shuttle table is positioned longitudinally, which results in the best possible accessibility for optional loading and unloading systems. Control, laser source and cooling are integrated into the machine. The cutting head has automatic focus adjustment. The system consists of the following components: Shuttle table (positioned longitudinally for best possible accessibility for optional loading and unloading systems) Encap ...

This LVD Orion 3015 Plus 2.5kW laser cutting machine, manufactured in 2018, features a FANUC CO2 2500 W laser source, 3000 mm x 1500 mm maximum sheet size, and a cutting head with 5, 7.5 lens cassette. Equipped with Laser Eye technology for precise sheet positioning and capacitive height detection, it ensures efficient and accurate cutting. The machine also includes cutting process monitoring and automatic on/off switches. Paired with cooling and extraction equipment, it offers a comprehensive cutting solution. For those seeking a reliable laser cutter, consider this LVD Orion for an optimized production process. Contact us for more details.

Number of hours energized: 36,000h; Sheet metal format: 1250x1250mm; 3D cutting volume: 900x900x340mm; X Axis Travel: 1270mm; Y-axis travel: 1270mm; Z-axis travel: 420mm; A-axis travel: ±360°; B-axis travel: ±135°; C-axis travel: ±360°; Fast speed across XYZ axes: 24m/min; Fast speed through AB axes: 9600°/min; Fast speed through C-axis: 12000°/min; Positioning accuracy: X and Y axes ±0.01/500mm; Repeatability: X, Y and Z axis ±5μm; A, C and C axis ±0.01°; Cutting thickness Steel: 20mm; Stainless steel cutting thickness: 8mm; Cutting thickness Aluminum: 6mm; Equipment: Cutting head with 7''5 lens Vacuum cleaner

This TRUMPF TruLaser 3030 laser cutting machine specializes in precise sheet metal cutting. Its equipped with a CO2 laser TruFlow 3200 and a refined laser control TASC system, complemented by the reliable SINUMERIK 840 D SL control. The cutting area extends to 3000 x 1500 mm, ensuring ample space for various cutting tasks. Noteworthy features include a lens cutting head with a 250 mm lens, a wide longitudinal conveyor belt for material handling, Liftmaster Compact for efficient loading, and an automatic pallet changer to enhance productivity. For further details regarding this TRUMPF laser cutter, please reach out to us.

Machine type: ESAB SXE-P-5000 NC/-CNC type: CNC version 52 Year of construction: 1995/Refurbishment and conversion 2009 track width: 5,000 mm track length: 34 000 mm cutting range: width 4 000 mm Laenge 18,000 mm runway height 700 mm table height 700 mm Head: 2 head 1: Cutting head head 2: marking unit water basin: 3 sinks sinkable to cut underwater. Power sources: 2 connected in parallel 400 A cutting is possible in the VA range up to 100 mm cutting cutter, soft fillers up to max. 50 mm. The plant is in operation. Complete data about the retrofit on request ; ready for immediate use

CNC flatbed portal cutting machine with web control CNC 3000. plasma system Fabr. KJELLBERG HiFocus 160i and filter system Fabr. KEMPER. Working range: 2000mm x 4000mm portal bridge with double-sided, synchronised rack/pinion drive in longitudinal axis / play-free timing belt drive in transverse axis / guide track with cover and high-precision linear guide system on torsion stiffener aluminium profile / trolley with precision profile rollers / 3 pieces digital AC drive motors / switch gear control for the switch gear CNC control under Windows with 32bit processor, color screen 12.1 LCD TFT, interfaces V24 + USB, SATRONIK PLUS CAD/CAM programming software with all geometry functions (e.g. point, arc, circle, rectangle, long hole, etc.), functions (e.g. moving adjustment, stretching, chamfering, etc.), manipulations (e.g. turning, mirroring, etc.), SATOMATIC HV 150 PT arc height scan  ...

Burner types: PT - 600 and PT - 15 XLS plasma power source: ESP 200; 100-160 volts; 40-200 A cutting method underwater Plasma cutting cutting table L:6,7xB:1,63xH0,79m Trafo ESAB ESP200 L:1,05xB:0,55xH:1.1m/330kg Portal; Rails x-way 7500 mm y-path 2700 mm Welding speed 2-750 IPM m/min Control CNC Vision 1000 cutting width y=max. 2438 mm thickness unleg. Steel=50.8 mm thickness of alloyed steel=38 mm thickness Alu=32mmmm burner cod1 piece Adjustment burner=approx. 150mmmm Total power requirement 39.8 kVA machine weight approx. 4.0; ready for immediate use

Zinser LK 110 Photo-optical cutting and plasma cutting system. The system has been upgraded from a control point of view. Cutting is possible via Photokop as well as via Cad / Cam Sytem possible. Optionally, autogen or plasma can be cut. Plasma source : Kjellberg PAS 45 W (cut up to 45mm) suction cutting table: 1.5 x 3m (new) including control PC with Cad/cam system Complete machine bridge available as spare part dispenser. Under electricity to visit .; ready for immediate use

Fully automatic bread slicer MHS Type: MHS IDEAL SB specifications: Round knife cutting bread slicer oil-free cutting even of warm breads 3 cutting thicknesses selectable: 8mm, 10mm and 12mm Bread passage: L 380 x H140-160 x D280 mm automatic bread gripper suitable for all types of bread with Bread rack for bagging with sight glass cover for optimal safety during the cutting process easy Cleaning without having to move the machine current model of MHS for further information please refer to the MHS website 230 volts / 1.0 kW / 4.8 A Dimensions: H110 x W90 x D76 cm Weight: 200 kg mobile on 4 deflection rollers with 2 brakes Year of construction: 2011 Function tested, machine immediately ready for use! Condition, see original pictures! If you have any questions, email or call. Purchase price incl. current VAT. A proper invoice will be issued!

KR-DUO cutter system Individual adjustment of the size of the piece Suitable to baking sheets 600 x 400mm as well as 600 x 200mm (as well as intermediate size) The longitudinal cut is effected in the lower cutting level The lateral cut is effected in the upper cutting level For every cutting level an individual number of cutting passes can be chosen. The machine is manufactured exclusively from food-grade materials. Power: 380V, 50 Hz, 3 Ph

Esab Combirex DX 3000 Working range: 2500mm x 4000mm 1x Plasma Support CNC Portal Plasma Cutting Machine Manufacturer: ESAB Type: Combirex DX 3000 Built: 2015 Control: Vision T5 Track width: 3,000 mm frame: 6000mm Working range: 2500mm x 4000 m suction table 1 plasma torch with power source m3 202 torch PT 36 Cutting rods: Punching: 38 mm Cutting: 45 mm laser pointer filter system ex protected cutting software: Columbus Very low operating hours commissioning on request

Made in Italy machine according to DIN 8605: lathe with increased accuracy. Tip height: 215 mm Turning diameter over bed: 430 mm Swing over carriage: 240 mm Top width: 1,000 mm Bed width: 290 mm Spindle bore: 52 mm Spindle nose: Camlock 6 " Spindle speeds variable: 6 Spindle speeds: 60-2,000 rpm S6/S1 engine power: 4 kW (option: 5.5 kW) feed Z-axis: (38) 0.05 - 1.88 mm / Rev Feed x axis: (38) 0.02 1,084 mm / Rev Thread cutting, metric: (30) 0.45-20 mm Thread cutting, Witworth: (35) 80-1 3/4 TPI Thread cutting, module: (25) 0.25-10 mm Thread cutting, Diametral Pitch: (30) 160-3 1/2 D.P.. Cross slide Lxw: 370 x 190 mm Transversal carriage stroke: 240 mm Upper carriage Lxw: 275 x 115 mm Upper carriage stroke: 120 mm Tailstock Quill diameter: 60 mm Tailstock Quill stroke: 135 mm Tailstock taper: MK 4 Weight: approx. 2,000 kg Facilities: -Infinitely variable  ...

New water jet cutting machine Make: aps Type: 3D 5-axis 301508 Little hours Conversion to pure water operation possible Year: new -Latest generation of control -Latest servo drives -Latest CAD-CAM software -Latest high pressure pump 22 kW -Latest Abrasivausrüstung with cutting head, Abrasivdosierer and storage containers Work area: L: 3000 mm x B: 1500 mm x H: 800 mm Dimensions: L: approx. 5000 mm, B: approx. 3500 mm, H: approx. 3200 mm Z-axis: optional with collision protection Cutting speed: up to 10 m / min. Positioning accuracy: ± 0.1 mm (500 mm travel) Repeatability: ± 0.05 mm Die heads: 1 x Abrasivschneiden or 1 x pure water cutting Electrical connection: 3 x 400 V, 50/60 Hz.; 35 A slow Compressed air connection: approx. 20 NL/min at 6 bar Water connection: depending on the used high pressure pump High pressure pump: 22 kW Pres ...

New water jet cutting machine Manufacturer: aps Type: Jetcut integral 2030 Little hours Conversion to pure water operation possible Year: new -Latest generation of control -Latest servo drives -New high pressure pump 22 kW -New Abrasivausrüstung cutting head, Abrasivdosierer and reservoir workspace: 2000 mm x 3000 mm Dimensions: L: approx. 4600 mm, B: approx. 2900 mm, H: approx. 1500 mm Z-axis: 180 mm, full servo axis, optionally with collision protection Cutting speed: up to 15 m / min. Positioning accuracy: ± 0.1 mm Repeatability: ± 0.05 mm Die heads: 1 x Abrasivschneiden or 1 x pure water cutting Electrical connection: 3 x 400 V, 50/60 Hz.; 35 A slow Compressed air connection: approx. 20 NL/min at 6 bar Water connection: depending on the used high pressure pump High pressure pump: 22 kW Pressure: depending on the used high pressure pu ...

Waterjet cutting system mobile Manufacturer Schmidt, Krantz & Co GmbH / Woma Maximator WS103 HFA-HD-Aggregat Maximator waterjet cutting system Waterjet cutting with 2,500bar Foerder power 2.3l/min Cutting head handbetaed, manufacturer Woma Weight 1,000KG External hydraulics with max 350 litres of foerder power required, not included!

X working range max .: 3000 mm Y Working range max .: 1500 mm Z working range max .: 115 mm Control: Siemens Sinumerik 840 D SL Laser power: 5000 W Beam on: 29.712 h Plate thickness St. Max .: 25 mm Plate thickness Va. Max .: 20 mm Plate thickness Al. Max .: 20 mm Standard Machine Specification: Machine - working range in 3000 x 1500 mm - Closed machine - Integrated cabinet - Optional barrier-free installation - Automatic pallet changer in longitudinal direction - Torque drive in combination with direct linear drives - Enclosed beam delivery via fiber optic cable - Chiller for machine cooling - Integrated electrical cabinets with inside light - Common ON-OFF Switch for machine and laser - Conveyor belt for small parts / slug - Work area lighting - Positioning laser diode - Spray device - PierceLine - FocusLine - NitroLine - PlasmaLine - Automatic nozzle cleaning - Transport and assem ...

Order No. 6720 TECHNICAL DATA - diameter of the main saw 500mm - 35mm spindle diameter - max cutting height 70mm - max material width 210mm - min / max length of the material before cutting 500 / 4000mm - pneumatic blade slide - diameter of the extraction port 100mm, 140mm - overall dimensions: length / width / height 2700x1200x1650mm + control - 3kW engine - feeding table with pull rollers - 0.37kW engine - overall dimensions: length / width / height 5100x900x1000mm - sorter with 4 pneumatic ejectors - 0.75kW engine - overall dimensions length / width / height 5500x1000x1050mm - constant feed speed - total weight 2245 kg - Italian production - original DTR + CE documentation - used machine, very good condition PRODUCT FEATURES The Cursal TRV 2200E 500 optimizer is designed for cross cutting of material. Truncated elements can be grouped according to their le ...

OERLIKON / ALPHATOME II T30 HP300 PPM 400 OERLIKON - Typ: ALPHATOME II T30 HP300 PPM 400 - Baujahr: à 2013. Special features of the ALPHATOME II series / EQUIPMENT: Camera system: Moving camera on the cross-drive carriage for easy positioning and cutting monitoring by the operator from the control panel. The graphic is done by a permanently visible button on the touch screen interface. Protective devices: 7 Facilities for the protection of operating personnel. Photocells in the front and back of the bridge. Emergency stop button on all corners, as well as on the external control panel. Anti-glare-/splash protection: The anti-glare panel of the bridge is raised or lowered automatically or by pressing a button. On the sides, the panel can be opened manually for the burner and wear parts. Furthermore, the noise development is significantly reduced and resulting smoke is bet ...

Cutting Machine Fruit & Vegetable Shredder Herb cutter herb cutting machine for e.B. red cabbage, white cabbage, blue cabbage, Used Manufacturer: Gevaar Cutting chamber approx.: 800 mm Rotor/cutting disc approx.: 700 mm Filling flap approx.: 900 x 800 H 300 mm Filling flap adjustable via Pfaff winch Outlet approx.: 800 mm Vector RF60-DV112M-4 Drive Motor 220/380 v, 15.2/8.7 A, 50 Hz Power 4 kW, 275 r/min Total approx.: 2000 x 1200 H 2300 mm Weight: 421 kg Changes and errors in the technical data, Information and prices as well as intermediate sale reserved.

CEMIL TR550A quick miter saw with electronic movable stop, Working direction from left to right, consisting of: - motorized roller conveyor at the entrance, measures 4000x600 mm, with additional manual stop - fast lower miter saw model TR550A with: Double button cutting control blade D=550mm Engine HP 7,5 , volt 380 useful cutting capacity (HxW) mm 30x397 / 100x347 / 165x175 ELAP CM77 control for cutting programming (recently changed keyboard) - motorized roller conveyor at the outlet, length 5400mm, with: electronic stop, useful stroke 5150mm (4900mm with protection mounted at cutting side) .. transverse supports with wheels and automatic pneumatic ups / downs, for side discharge - frame with inclined supports with rollers for unloading cut pieces, measures about 4500x1500mm Total size about 10 x 2.5 meters. Machine according to CE standards

ERMAKSAN LASERMAK 6000 6X2 laser cutter was produced in 2014. Technical parameters: – laser source: 6000 W CO2-laser GE Fanuc C6000i-Model C – RF-excitation: 2 MHz – power stability: ± 2% (power monitor) – laser wave length: 10.6 μM – beam mode: Fanuc Low Order Mode – laser shutter: mechanical safety shutter – laser gas composition: CO2 / He / N2 – gas consumption by laser: 20 l / h – cooling water flow rate: 250 l / min – maximum cutting capacity: mild steel 25 mm (during tests the maximum achieved: 30 mm), stainless steel 15 mm, aluminum 12 mm - machine activation time: 22899 h - working time: 10122 h - cutting time: 8429 h – total energy requirement: 100-120 kW – cutting head focal length: 5 -7” -10 inch – maximum worksheet size: 6150 x 2000 mm – maximum burden capacity: 4000 kg – machine axes: 5 axes [X, Y, Z, U (X2), V] – axis ...

Plasma-gas cutting machine ECKERT JANTAR 2 was produced in 2007. Technical parameters: – CNC control: ECS 859 – table: 9 sections, 1.62 m long each – table width: 3.2 m – table length: 14.58 m – number of slides: 3 – possibility of communication with a computer – possibility of plasma and gas cutting – 2 Harris gas burners – plasma cutting thickness: 8-10 mm – gas cutting thickness: up to 90 mm – power supply: 230 V – rated current: 12 A – plasma aggregate: PA-S45W

Resonator operation time: 59000 Cutting time: 41000 Cutting stainless steel up to 12mm Cutting structural steel up to 20mm Aluminum cutting up to 8mm.

ATMSolutions ATMS 2030 150W laser cutting machine was built in 2018 in Poland. Distinguished by state-of-the-art solutions and components, the machine is used for precision cutting and engraving of a wide range of materials, i.e. rubber, wood and leather. Its deformation-resistant design with a large, 3000 mm long and 2000 mm wide through-table makes it possible to achieve high working speeds while maintaining maximum stability. Axis movement is performed by a top-of-the-range drive system consisting of linear guides with ground tracks and linear carriages, which ensures the highest positioning accuracy. The professional LaserWork control software for operating the machine supports the most important file formats and works directly with the most popular graphics programs (CorelDraw, AutoCAD, etc.). The CO2 laser ATMS 2030 is offered with a wide range of equipment, including, among others ...

Combined CNC glass cutting table with topiary for glass & straight cut for laminated safety glass - CNC control panel with PC & modem for remote maintenance - 2 crushing strips 1 x crosswise 1 x longitudinal - software package "Edit-Way" with 250 parameterized shapes - CAD program for free drawings - vinyl cutting system incl. software & head - Shape scanner for copying shapes with laser system (also used for aligning the glass) - graf. Interface for controlling, cutting process & machine functions - Movement of the glass by means of air cushion - Loading and unloading by hydraulic movement arms - Zero point displacement for laminated safety glass cut - Ball-bearing sliding bridge in aluminium design - UPS system for voltage fluctuations. Specifications: max working area 3700 x 2600 mm - incl. side table 1500 x 3600 mm - glass thicknesses 2-19 mm - working height 880 - 970 mm adjustabl ...

CAKE CUTTING MACHINE KRUMBEIN KSSM V 0.1 D semi-automatic cutting machine; double blade cutting system; cutting takes place on two levels – the first level is cut transversely, the second – longitudinally; raising the tray from level to level is done manually; the distance between the knives can be adjusted; the knives are easy to remove; tray max. dimensions: length 800 mm, width 600 mm; product max. height 55 mm; power 400 V/3 Ph/ 50Hz, 1,8 A

With a width of 1.8 meters, the Gerber Paragon VX is a state-of-the-art cutting solution specifically designed for the industrial production of medium-sized materials. Here are some typical features and descriptions that might apply to this variant of the Gerber Paragon VX: Medium format: With a width of 1.8 meters, the Gerber Paragon VX is ideal for processing medium-sized rolls of material and producing medium-sized to large-format designs. This makes it ideal for the production of promotional materials, clothing, technical textiles and other medium-sized products. High Precision: The Gerber Paragon VX offers outstanding cutting precision, ensuring high accuracy even with complex designs and fine details. This allows the production of high-quality products with a professional finish. Automation and efficiency: With advanced automation features, the Gerber Paragon VX optimizes  ...

Operating hours machine: approx. 59,000 h (stand 11-21) Operating hours laser: approx. 11,000 h (stand 11-21) Working area X x Y x Z: 3048 x 1524 x 170 mm Laser Laser Type: DC Semiconductor Excitation Laser power CW: 4400 Watt Laser power range: 150 - 4400 Watt Machine CNC control: Bystronic Byvision Cooling unit: E. Furrer WKL 430 Dust collector: Donaldson Torrit DFPRO 6 SPRK Total electrical connection: 52 KW machine + 5.5 KW suction Space requirement approx.: 12,900 x 7,100 x 2,070 mm Total weight approx.: 15.000 KG Cutting material types and thicknesses Steel ( EN 10027-1 S 235JR+AR o. correspondingly. Raex quality) 25 mm Inox ( EN 10027-2 1.4301 (X5CrNi18-10 ) 20 mm Aluminum alloys (e.B. 3.3535 AlMg3 ) 12 mm Machinery Standard: • Cutting machine with operator protection according to occupational health and safety regulations in the cutting, lo ...