cutter food used for sale

2x Lattice Box Stainless Steel Stainless Steel Lattice Box with Runners, Lid and Front Half Foldable  The boxes come from the pharmaceutical industry. It is a completely closed welded construction. This makes the boxes submersible and also suitable for the food industry. non-stackable Lattice Box, Type: 650 Manufacturer: LKE Schneider Leichtbau GmbH Material: Stainless Steel 1.4301 Bars: Tube D= 22 mm Load capacity: 1,000 kg Size: 1,245 x 845 x 890 mm Weight: approx. 76 kg per piece Auction-ID: A7-49816-138

Dosing, weighing, counting, 50 picks per minute, equipped with 3D vision technology, \"Vision\" camera/control, robot module \"Denso Scara\", Gripper: vacuum path with detection, industrial PC with touchscreen HMI Auction-ID: A1-49547-111

2x Lattice Box Stainless Steel Stainless Steel Lattice Box with Runners, Lid and Front Half Foldable  The boxes come from the pharmaceutical industry. It is a completely closed welded construction. This makes the boxes submersible and also suitable for the food industry. non-stackable Lattice Box, Type: 650 Manufacturer: LKE Schneider Leichtbau GmbH Material: Stainless Steel 1.4301 Bars: Tube D= 22 mm Load capacity: 1,000 kg Size: 1,245 x 845 x 890 mm Weight: approx. 76 kg per piece Auction-ID: A7-49816-142

Opel Movano food truck equipped with a refrigeration cell, ideal for markets, events, fairs or mobile activities. Equipped vehicle with cold room, refrigerated counter, sink with 40-litre hot water boiler, hydraulic tail lift and liftable side tarpaulin providing a practical and protected sales area, perfectly suited for use in markets. The vehicle is sold with up-to-date maintenance. The tyres are new, the belt has been replaced recently and the refrigeration system has been fully serviced with freon recharging/control. The whole thing is in good working order and ready for immediate operation. Auction-ID: A3-46155-37117

Dosing, weighing, counting, 50 picks per minute, equipped with 3D vision technology, \"Vision\" camera/control, robot module \"Denso Scara\", Gripper: vacuum path with detection, industrial PC with touchscreen HMI Auction-ID: A1-49547-112

Fully equipped with: • Sturdy extractor hood with adjustable position • Refrigerated workbench with freezer function • Sink with hot and cold water • Multiple sockets in the trailer • Full stainless steel interior (HACCP-proof) • Interior and exterior lighting Auction-ID: A1-47416-85

General SKU271Y276 MakeBüchi LocationBarneveld CEcheck TypeB-290 Main Features MaterialGlass Specified Features - Spray dryer Spray dryercheck Drying tower dia.150 mm Cylindrical height480 mm Conical height60 mm OutletDia. 25 mm With nozzle atomisercheck Air heating (electric)2,3 kW With cyclonecheck Cyclone sizesDia. 80x 250 mm With dust filtercheck With fancheck Motorcheck MaterialGlass General No.0800000985 Year of constructionunknown Floorspace0,8 x 0,7 m Total height1,4 m Weight80 kgPowdered foodsGeneric medicinesFine chemicalsStarchBiotechnologyCatalysts & fillersFeed additivesSpray dryersCosmeticsDairySolid pharmaceuticsDyes & pigmentsAPINew arrivalsMinerals & inorganicBüchiIndustries > Food & Feed > Powdered foodsIndustries > Pharmaceutical > Generic medicinesIndustries > Chemical > Fine chemicalsIndustries > Food & Feed > StarchIndustries > Chemical ...

General SKU271Y420 LocationBarneveld CEcheck Main Features MaterialStainless steel Surface0.15 m2 Specified Features - Freeze dryer Freeze dryercheck Cooling surface0.15 m² Number of plates5 Plate sizesDia. 195 mm Between the plates25 mm With cooling compressorcheck MaterialStainless steel 1.4301 (304) General MakeChrist Serial6760 TypeAlpha 2-4 / 100402 Year of construction1996 Mounted on framecheck Floorspace0,7 x 0,4 m Total height1,7 m Weight100 kg Extra Specificationswith: Vacuumpump: Preifer vacuum duo line, type: Duo 20M, max 24m³/h, motor: 0,75kW, 230V, 1460 rpm 5x pan, dia. 195mm, 18 mm hight. 9x pan, Dia. 195mm, 14 mm hight isolating jacket aditional parts and tools.Powdered foodsGeneric medicinesFine chemicalsBiotechnologyFreeze dryersFeed additivesCosmeticsFood additivesSolid pharmaceuticsBiopharmaceuticalAPIChristIndustries > Food & Feed > Powdered ...

General SKU271Y421 MakeVetterTec SerialBA8641 Main Features MaterialStainless steel Motor50 KW Specified Features - Spray dryer Spray dryercheck Drying tower dia.1363 mm Cylindrical height1750 mm Conical height900 mm OutletDN100 With nozzle atomisercheck Evaporation capacity6,5 kg H2O/h (Tin 190°C: Tout 90°C: Air flow 160 m3/h) Air heating (electric)(2 x 20 kW) With cyclonecheck Cyclone sizesø 250 x 1100 mm With dust filtercheck Filter surface0.5 m² Cleaning by air pulsecheck With fancheck Capacity250 m³/h Motor3 kW (400 V, 2940 rpm) MaterialStainless steel 1.4404 (316L) General Year of construction2020 LocationBarneveld With switchgear(as is) Floorspace2,5 x 5 m Total height3,3 m Weight1500 Extra SpecificationsComplete skid with:- electrical heating (2 x 20 kW)- spray dryer (estimated maximum&:nbsp: evaporation capacity ± 20-35 kg water/h)- product ...

General SKU320Y752 MakeApex style ( type plate missing ) LocationBarneveld Main Features MaterialStainless steel Volume45 Ltr. Motor0.37 KW Specified Features - Tumbler mixer V-type tumbler mixercheck Capacity45 l Diameter400 Length/Depth700 Inlet2x dia. 385 mm OutletDN 100 with manual valve With motor0.37 kW (380 V, 39 rpm) MaterialStainless steel 1.4305 (303) General Mounted on mild steel framecheck With switch(as is) Floorspace1,40 x 0,90 m Total height1,30 m Weight210 kgPowdered foodsGeneric medicinesTea, herbs & coffeeTumbler mixersAgrochemicalsSpicesPlastic & polymersCatalysts & fillersFeed additivesOther pharmaceuticsCosmeticsFood additivesAnimal feedOther feedSolid pharmaceuticsDyes & pigmentsAPIMinerals & inorganic-Industries > Food & Feed > Powdered foodsIndustries > Pharmaceutical > Generic medicinesIndustries > Food & Feed > Tea, herbs & coffeeMixers >  ...

Grunwald filling- and closing machine, type: Foodliner 12000/8, serial number: WK43/07, year of construction: 2008, 400 V, 3 Ph, 50 Hz, 15 kW, weight: 3500 kg, capacity: 18000-22000 cups/hour, diameter cups: 55/65 mm, total dimensions: 4250 mm x 2000 mm x 1800 mm. Including outfeed belt, dimensions: 2700 mm x 700 mm x 1500 mm, 2 pallet boxes with parts, dimensions: (2x) 1200 mm x 1000 mm x 750 mm, switch cabinet, dimensions: 1200 mm x 350 mm x 2100 mm.

The products have not been tested for functionality. Therefore, there is a possibility that individual items may not work. The products may have scratches, dents, incomplete, or general signs of use. Visit us on the day of the inspection to get an accurate picture of the condition and reason for return. Shipping is also possible. If you would like shipping, please send an email to: info@qplaza.de. For more information, please contact us. Auction-ID: A1-50209-941

Type: Food trailer. Fully equipped cell. Large side service opening with gas springs. Rear access door. Stabilizing feet. Interior design: Stainless steel worktop along the entire length. Stainless steel sink with tap. Plenty of storage and cupboards. Storage shelves. Easily washable floor. LED interior lighting. Electrical installation with 230 V external socket (blue CEE). Multiple interior electrical outlets. Equipment present: Professional double waffle iron. Frilec refrigerator. Chest freezer. Séverin microwave. Cash register / cash terminal terminal. Soap dispenser. Serving tray. Possible uses: This trailer can be suitable for: Waffle Sale Pancakes Ice cream Burgers Sandwiches Hot dogs Fries Drinks Private events Festivals Markets Fairs Fixed food truck Observed status: Very clean. Furniture in excellent condi ...

R21746/11 HOBEMA Cross cutter Model: 101 A Built: 1969 Working width: 700 mm Availability: by arrangement with collecting cylinder Available: by arrangement

VHM shank cutter from Garant (20 3160 - 20) lightly used, DIN 6527, type N, D= 20 mm number of teeth - 8, ask also for other quantities from the cutters. Price for 10 pieces 240,-€ for 1 piece 25,- €

R22352/11 SCHWALBACH Cross cutter Model: BS 650 Built: approx. 1995 Working width: 650 mm Fully automatic Cutting length: 4 - 1000 mm Roll diameter: 300 mm max. Material: Soft and hard foils PVC laminated fabric 0.1 - 1mm Dimensions: 1000 x 600 x 1000mm (W x D x H) Available: by arrangement

<br><br><br>Still in operation: Yes<br>Available: immediately

The Velati F4 continuous meat cutter, made entirely from stainless steel, has been designed to transform a block of meat into meat pieces, using a blade system specially devised to avoid damaging or crushing the meat. A combined blade structure, consisting of an oscillating guillotine blade and circular saw blades, allows the meat to be processed at various temperatures and cuts both the lean and fat meat. The machine can produce up to 8-10 tons per hour. Velati meat cutter is driven by a conveyor, whose speed can be adjusted via a variator, allowing both the hourly production rate and the thickness of the cut pieces to be controlled. Velati meat cutter is equipped with inverter which regulate the feed belts. The F4 models is equipped with touch-screen control and PLC which can configure and store the different work programmes. The machine is also fitted with a safety system that is cont ...

The SERVOCUT 302 cutting machine is designed as a wet cutting grinder for cutting large / small / regularly / irregularly shaped workpieces made of metal ceramics or material compositions. Thanks to the modern joystick control, the separation process can start after just a few seconds: position the test piece clamping, the cutting disc with joystick in a hurry, press START and leave the machines (unmanned). Depending on the version available as a fully automatic version (X-Y-Z axes motorized) or manual axle delivery. The ideal equipment for all applications - enormously flexible, ergonomic operation with quick start, suitable for the smallest workpieces but also for long test pieces (driving cut) - the ideal solution for the professional (service provider in material testing, contract hardening, ...) and for difficult materials (pulse cutting, etc.) The SERVOCUT cutting machine  ...

480 x 320mm; 30,000 c/h; 4 x MID-WS unwinding stations; 4 X ZHF (Siguture systems); SLT station (card glue device); SHT (Gatherer Stitcher Drum); UTR delivery station; UTR-SNT gripper track; UTR SHT Delivery Station; SNT (trimming drum); UTR SNT Transfer Station; UTR-SNT gripper track carry unit UTR-SNT delivery station; missing copy delivery station (UTR); EP station; VP station; HP station ETR insert drum. Opition 2: Mid AWS (relax station); ZF SHT Feeder; UTR gripper track on 4X RAB insert feeder; 4 x VSS stations; Gripper to follow TO VP station-to ETR insert drum Still in operation: No Verf Gbar: Immediately

1. CUTTER HAED WITH KNIVES FOR KRÄMER + GREBE - K+G WETTER SA 120 2. CUTTER HAED NO KNIVES FOR KRÄMER + GREBE - K+G WETTER SA 120 Request a quote iNTER-WiBA Sp.J. ul. Krakowska 263 PL 43-305 Bielsko-Biala USt-IdNr.: PL547-17-47-669 tel. 0048/33 812 58 60 fax. 0048/33 812 58 36

ROUTER type COSMEC 1000 second hand machine volt. 380 / 50 max. working mm. 1000

; ready

Manufacturer: MAN GHH Power supply: 400 V / 50 Hz Power capacity: 500 kg Lifter for cutter trolleys 200 L Request a quote iNTER-WiBA Sp.J. ul. Krakowska 263 PL 43-305 Bielsko-Biala USt-IdNr.: PL547-17-47-669 tel. 0048/33 812 58 60 fax. 0048/33 812 58 36

Seydelmann K 90 DC-8, 90 liters bowl cutter, all stainless steel, variable knife speed, 2 bowl speeds, variable mixing speeds forwards and reverse, knife shaft brake electrically operated, noise reduction cover, loading device, unloader, in very good condition. The machine is immediatley available and can be tested in our facility in Koblenz, Germany.

With the three-head roller saw, plastic-coated films can be sawn from wide roll to customer roll. With the system, film rolls can be sawn on 3" and 6" cardboard or plastic sleeves. The first cutting head is firmly positioned and defined as a master. The other two cutting heads are positioned to the master on the desired cutting width. A maximum of 2 benefits are possible. Sawing operations can be sawn dry, or wet by a wetting device of the saw blade. • Mesh type: Saw Material: Foil • Cutting system: circular saw s600 mm ( 3 saw cuts ) Saw cutting width: 6mm • Space usage: 7m x 4m Dimensions machine: 4.20m x 2m (height closed 2.15m, open 3,50m Sleeve width max.: 2700mm Cut width max.: 2620mm Cutting width min.: 500mm • Rolls max. : 550mm • Rolls min. : 200mm Sleeve diameter: 76mm/152mm

Knife for cutter LASKA type K-200 Request a quote iNTER-WiBA Sp.J. UL. Krakowska 263 PL 43-305 Bielsko-Biała USt-IdNr.: PL547-17-47-669 Tel. 0048/33 812 58 60 fax. 0048/33 812 58 36

The ZAKMET FIRECUT CNC 1325 13000 X 2500 gas plasma cutter was produced in 2011. The machine is equipped with Hypertherm EDGE'Pro digital control. The burner's working area is 13,000 mm long and 2,500 mm wide. The running elements of the cutter are lubricated with the Memolub 3.0 central lubrication system. Technical data of the plasma burner: - machine working area (L x W x H): 13,000 x 2,500 mm (additionally 700 mm) x 200 mm - maximum table load: 15 kN / m2 - machine supply voltage: 3x400V AC 50 Hz - central lubrication: Memolub 3.0 - minimum temperature of the working environment: +5 degrees C - maximum temperature of the working environment: +60 degrees C - machine dimensions (L x W x H): 14500 x 5500 x 2000 mm Plasma cutter equipment: - CNC control: Hypertherm EdgePro - ventilated section table: 1550 x 2600 mm - 9 segments - gas burner: type MS 3452 \ 250-PM (x2) - ...

Fill 3D-Ultrasonic Cutter Here we offer you a Fill 3D ultrasonic cutting system. Fill 3D-ULTRASONIC SCHNEIDER 3D ULTRASONIC CUTTER The 3D ultrasonic cutter from Fill enables three-dimensional contour cutting of fiber-reinforced plastics using ultrasonically excited cutting systems. Your advantages: Ergonomic feeding and unloading Easy creation of bleed programs (NC control) Space-saving system concept (as an alternative to the robot) High repeatability High process stability Easy and fast tool change Possible integration into an overall process chain The principle: The linear axis portal enables precise guidance of the ultrasonic knife with a small footprint and simple kinematics. Thanks to the Siemens 840 D CNC control, the trimming device can be programmed like a machine tool. Tool corrections or path changes can simply be carried out directly on the machine. As standa ...

Hydraulic stainless steel freezer block cutter (guillotine) with loading for meat/fish/vegetables/cheese. NEW MACHINE IMMEDIATELY AVAILABLE FROM STOCK 2 pieces cutting knife 5 pieces cross cutting knife Cutting room: 460 x 220 x 750 mm Cutting temperature: up to -25° C Cutting capacity: up to 1,600 kg/h Push button control Hydraulic loading Machine dimensions: Width: 90 cm Length: 220 cm Height: 185 cm Weight: 550 kg Connection: 5.0 kW Voltage: 400 V, 50 Hz CE mark: yes

Yawa TYM 790 Age: 2015 DESCRIPTION: Max. sheet: 790 x 560 mm, Min. sheet: 310 x 210 mm, Max. die-cutting area: 750 x 520 mm, Max. hot-stamping area: 760 x 525 mm, 3 longitudinal foil shafts, 2 transversal foil shafts, 6 x separately adjustable heating zones Features: Efficient and easy to operate. Delivers accurate, adjustable impression for foil stamping, embossing and die cutting. Five pull foil feeds are fully programmable to provide maximum versatility and excellent foil economy. Air blast system helps to separate foil from stock on critical jobs. Accurate and programmable control system with servo motor and encoder. Micrometer adjustment on side guide and front gripper guide. Mechanical dwell on impression guarantees perfect foil stamping/foil embossing performance. Missed sheet detector. Honeycomb base is convenient for loading. 6 heating zones with digital control. 24 ...

Control Board A1

Cardboard scissors Biagosch & Brandau Manufacturer Biagosch & Brandau, Hamburg Cutting width: 105 cm Table width: 110 cm Table depth: 60 cm Table height: 84 cm With pull-out tray for clippings

Rühle SR 1 dicer, performance 0,8t/h, grid set variable adjustable, 1 cutting knife. The machine is immediately available and can be tested in Koblenz, Germany.

Many of our machines are available from stock. Call and ask to find out more. CNC plasma/gas cutting machine PCO-3015-DG The machine was engineered and manufactured in Poland. Working parameters: - XY operating range (working area): 1520 x 3100mm - Clearance between table and gantry: 240 mm - Maximum cutting tube height: 200 mm - Idle speed (Cutting speed depends on the capacity of the plasma source and the thickness of working material.): 25000 mm/min. - Compatible with Hypertherm Powermax 45-125, and Hypertherm MAXPRO200 plasma sources. Structure specifications: - Length: 3650 mm - Width: 2280 mm - Height: 1500 mm - Total mass: 1200.0 kg - Maximum load: 2500.0 kg - Adjustable support legs: 6 pcs Easy application of metal sheets The entire gantry and the head are designed to travel out of the working area. This makes applying large sheets of metal easy. Syste ...

Many of our machines are available from stock. Call and ask to find out more. CNC plasma/gas cutting machine PCO-4020-DG The machine was engineered and manufactured in Poland. Working parameters: - XY operating range (working area): 2020 x 4100mm - Clearance between table and gantry: 240 mm - Maximum cutting tube height: 200 mm - Idle speed (Cutting speed depends on the capacity of the plasma source and the thickness of working material.): 25000 mm/min. - Compatible with Hypertherm Powermax 45-125, and Hypertherm MAXPRO200 plasma sources. Structure specifications: - Length: 4650 mm - Width: 2780 mm - Height: 1500 mm - Total mass: 1950.0 kg - Maximum load: 4000.0 kg - Adjustable support legs: 8 pcs Easy application of metal sheets The entire gantry and the head are designed to travel out of the working area. This makes applying large sheets of metal easy. Syste ...

Producer: INOTEC Type: WT97-RNSV Power: 2,5 kW Weight: approx. 400 kg Length x width x height: 998 x 850 x 1740 mm Sausage cutter INOTEC type WT 97 - RNSV , directly from the customer, without table - Caliber from 17 to 46 mm - Adjustable speed of 0.25 m/s up to 0.8 m/s Ask for an offer iNTER-WiBA Sp.J. ul. Krakowska 263 PL 43-305 Bielsko-Biala USt-IdNr.: PL547-17-47-669 tel. 0048/33 812 58 60 fax. 0048/33 812 58 36

Many of our machines are available from stock. Call and ask to find out more. CNC plasma/gas cutting machine PCO-6020-DG The machine was engineered and manufactured in Poland. Working parameters: - XY operating range (working area): 2020 x 6100mm - Clearance between table and gantry: 240 mm - Maximum cutting tube height: 200 mm - Idle speed (Cutting speed depends on the capacity of the plasma source and the thickness of working material.): 25000 mm/min. - Compatible with Hypertherm Powermax 45-125, and Hypertherm MAXPRO200 plasma sources. Structure specifications: - Length: 6750 mm - Width: 2780 mm - Height: 1500 mm - Total mass: 2700.0 kg - Maximum load: 7000.0 kg - Adjustable support legs: 10 pcs Easy application of metal sheets The entire gantry and the head are designed to travel out of the working area. This makes applying large sheets of metal easy. Syst ...

Qty. 1 Second-hand die cutter with flexo printing press Mfc.: M&M Mediterránea de Maquinaria Type: WRC 98 1150-1600/DISTENCO Built: 1999 Flexo printing press with 3 colours Capacity: 50,000 boxes in 1 shift Input material: cardboard of max. dimensions: 1,150 mm x 1,600 mm Output material: boxes (for pizza) Included in the scope: approximately 15 tools for different sizes of boxes New electronics The complete die cutter with flexo printer will require approximately loading on 2 trucks. The box production process is as follows: Ready-made cardboard formats are inserted into the machine, the machine prints up to 3 colours, cuts the box and sends it on with a conveyor and stacks it.

Treif Husky CE dual purpose cutting machine, precise dicing and cutting with one machine, automatic start-up device, cut dices, strips, slices and portions. The machine is currently in the refurbishment and you are very welcome to test the machine at our office in Koblenz, Germany.

Stephan MCHD 30-II micro cutter

Magurit frozen meat cutter

VIRO StyroDesign XL-2 EPS cutting machine was built in 2011 in Slovenia by VIRO pakirni stroji d. o. o. The machine is used for precision cutting of materials such as EPS blocks, using hot resistance wires. The process is extremely fast and efficient thanks to the use of a large number of 2000 mm long wires. The machining parameters are programmed in the state-of-the-art SytroDesignPRO software, which, thanks to the optimisation of the cutting layouts, significantly facilitates process management and reduces material losses. All this makes the StyroDesign XL-2 styrofoam cutting machine an excellent choice for the production of, among others, insulation components and other prefabricated building components. Technical specifications of VIRO StyroDesign XL-2 foam cutting machine - software: StyroDesign PRO - cutting angle: 90° - cutting speed: up to 2.5 m/min - ability to cut at an ...

Ruhle Dicer SR 2 Turbo, loading device for euro boxes, discharge-conveyor belt, touch PC control,different grid sets, cutting temperature: from -5°C to +80°C, capacity: max. 3000 kg/h. The machine is currently in the refurbishment and will be available soon. You are welcome to test it in Koblenz, Germany.