cut off saw used for sale

Wohlenberg Guillotine with spare knife, in very good production ready condition. Gives exact cut and everything operational. Can be used to cut other materials rather than paper, such as vinal, plastic, tin, etc.

Precision cutting unit IMA Type: 08.376

Drilling- cutting machine Brand: Comec Type: FIMOV new machine IDEAL MACHINE FOR NARROW PART MACHINING IN THE FURNITURE SECTOR Machine can be combined with drilling units from several sides, Sawing unit for cutting the workpiece to length, optionally inclinable With magazine and automatic workpiece transport to the operator

Unit for grooving / precision cutting Make: IMA

Working hours laser on: 28.313 h Working hours beam on: 8.421 h Laser power: 6000 Watt Working range laser: 3048 x 1524 x 70 mm Max. steel: 25 mm Max. stainless steel: 30 mm Max. aluminium: 30 mm Max. copper: 12 mm Max. brass: 12 mm Length: 11000 mm Width: 6050 mm Height: 2565 mm Machine weight: 12000 kg Electrical connected load: 31 kW

Working hours laser on: 57785 (23.03.2022) h Working hours beam on: 40160 (23.03.2022) h Laser power: 5000 Watt Control: Siemens 840 D Working range laser: 3000 x 1500 x 115 mm Max. steel: 25 mm Max. stainless steel: 20 mm Max. aluminium: 12 mm Length: 11100 mm Width: 4600 mm Height: 2400 mm Machine weight: 12000 kg Electrical connected load: 105 kVA

CONTROLS   PLC SIEMENS S7 300 OVERALL SPECIFICATIONS (COIL LINES)   sheet width max.: 500 mm   sheet thickness max.: 4 mm   coil weight max.: 10.5 to   feedstock transport direction: right to left COIL CHAIR   coil weight max.: 10.5 to   stroke: 750 mm DECOILER   design: single reel   sheet width max.: 500 mm   sheet width (min): 150 mm   coil weight max.: 10.5 to   max. diameter of coil: 2020 mm   mandrel expansion range from: 470 mm   mandrel expansion range up to: 530 mm   feed velocity max.: 20 m/min LEVELLER UNIT   sheet width max.: 500 mm   sheet width (min): 150 mm   sheet thickness max.: 4 mm   sheet thickness min.: 2 mm   number of leveller rolls: 9   diameter of leveller rolls: 56 mm   diameter of feed rolls: 150 mm   feed velocity min.: 1 m/min   feed velocity max.: 20 m/min CUT-TO LENGTH SHEAR   sheet width max.: 530 mm   ...

- Programm - air table - side table left and right - spare knife

Complete electronic boards(cards) for Schneider 115 mc v built 1990. Can ship world wide. Card numbers still available: 4141 APS-13010 MV40-5110 KV 40-30112APS-13210 MV 40-5020 4110 MV40-3040 MV40 - 30 20 MV40-3331 APS 13040-10 4131 4120 The mentioned cards were taken out of a fully operational cutter.

Inv. Num. : 8273 Type: Bylas 4020-2 Producer: Bystronic Created: 1994 Parameters: Control system: Bystronic CNC 90 Maximum power: 3.5 kW Work table length: 4000 mm Work table width: 2000 mm Maximum sheet thickness when cutting (stainless steel): 0.2-6 mm Maximum sheet thickness when cutting (aluminum): 1-6 mm Maximum sheet metal cutting thickness (steel): 0.2-12 mm Maximum sheet metal cutting thickness (copper/brass): 1-4 mm Maximum sheet metal cutting thickness (galvanized): 0.2-8 mm Maximum woodcut thickness: 50 mm Maximum cutting thickness for plastic: 50 mm Equipment: Replacement resonator (2kW) Spares

Granulator - Wanner C17.26sv / Like new Year of construction: 12/2020 Description: Slow-moving granulator with gearbox Power: 3 kW 2 stator blades, 12 rotor blades, the sieve - interchangeable Hopper inlet: 280x250 mm Grinding chamber opening: 240x170 mm It is very easy to clean the grinder, which is especially recommended if the color of the ground fabric is changed often All offered machines are started by our service technicians before they are sold. It is possible to receive a video of the technical tests of the selected machine or to participate in live technical tests at our company in Łódź. Price: On request

Granulator - Wanner D25.38c / Like new (2 pcs.) Year of manufacture: 02/2019 Description: Slow-moving granulator with gearbox Power: 4 kW 2 stator blades, 18 rotor blades, the sieve - interchangeable Hopper inlet: 370x330 mm Grinding chamber opening: 385x190 mm It is very easy to clean the grinder, which is especially recommended if the color of the ground fabric is changed often All offered machines are started by our service technicians before they are sold. It is possible to receive a video of the technical tests of the selected machine or to participate in live technical tests at our company in Łódź. Price: On request

Bread slicer Hartmann SL30 Slicer - Continuous bread slicer - Hartmann Slicer SL30 - Voltage: 380 volts - Rated current: 16A - Power consumption: 5kW

BYSTRONIC ByStar 4020 laser cutting machine was built in 2011 by the renowned Swiss brand BYSTRONIC. The machine, designed to meet the highest industrial standards, is used for precision cutting and engraving of workpieces with a maximum thickness of 25 mm. Materials made of e.g. steel or aluminium are machined using a laser beam with a maximum power of 6 kW and a thickness of just a few μm. It ensures extremely precise workpiece edges, which are characterised by unprecedented smoothness and absence of irregularities. The offered ByStar 4020 laser cutting machine is also extremely easy to operate. The process parameters are programmed in the intuitive ByVision CNC control, which allows the creation of advanced machining programmes in just a few steps. All this makes the BYSTRONIC laser the perfect choice for any industrial plant. Technical specification of the BYSTRONIC ByStar 402 ...

TRUMPF TruLaser 3060 laser cutting machine was built in 2007 in Germany by TRUMPF Werkzeugmaschinen Teningen GmbH. The machine, distinguished by its excellent precision and high productivity, is used for machining workpieces with a maximum thickness of 20 mm. The machining process is performed by a stable laser beam with a power of 4 kW and a thickness of only a few μm, which is generated by a reliable laser source with the highest energy efficiency. The automatic pallet exchange system, in turn, allows simultaneous loading and unloading during the cutting process, reducing machine downtime to a minimum. The offered TruLaser 3060 laser cutting machine also features a number of state-of-the-art technical solutions that significantly affect the cutting quality and expand the machine’s machining capabilities. This includes, for example, the ControlLine distance measuring system, which ...

45 cycles per minute with chamfering 60 cycles per minute without chamfering Maximum cutting length 700 mm, width 400 mm

Multi-wire cutter with slat feed and chunk cutter 13 stones in NF format with three-sided chamfering. Batten length 1340 mm

BACCI FC 8 2500 linear milling machine Working length 2500mm Working width 200mm Working height 180mm Number of units 8 Milling 7.5kw Milling 7.5kw Milling 5.5kw Milling 5.5kw Grinding/milling 4.5/3.3kw Grinding/milling 4.5/3.3kw Sanding 3kw Sanding 3kw Hydraulic feed Working speed 0-15m/min Return speed 50-100m/min Year of production 2004 CE Certified Machine weight 5100kg

Laksa KU130 Bowl cutter Stainless bowl cutter, 130L capacity bowl, six blade assembly, with discharge arm, mitsubishi touch screen hmi controls, modified to run on an AC motor with Allen Bradley Powerflex753 inverter drive, with manual, 3Ph

Max. cone distance: 230 mm Number of teeth: 5-150 Diameter of taper hole at large end: 100 mm Taper: 1:19,7 Depth of taper: 150 mm Diameter of hole through spindle: 78 mm Diameter of spindle nose: 140 mm Max. offset above center: 114 mm Max. offset below center: 114 mm Max. distance from machine center to nose of spindle: 343 mm Min. distance from machine center to nose of spindle: 63 mm Cutter speeds: 17-115 rpm Feed (sec/tooth): 9-80 sec Floor space: 1900x2900 mm Net weight: 10750 kg

Manufacturer: Amada Model: FLC3015AJ-C2R Year of Manufacture: 2018 Working Area: 3070 x 1550 mm 2000 W laser Find more here - / Contact us at -

:::TECHNICAL SPECIFICATIONS::: CNC Model: ECS CNC Version: 4802 Self-centering diameter: 1500mm Turning diameter on the bench: 2000mm Turning diameter on the carriage: 1360mm Turning length: 4000mm Turret: automatic Number of tool turrets: 1 Number of tool positions for the first turret: 4 Number of fixed tool positions for the first turret: 4 Tailstock: yes Positioning: Automatic Chip conveyor: belt Machine equipment: Large steady rest up to 1300 mm small bezel up to 600mm Large boring bar diameter 150 by 2000 mm long

ECKERT Opal WaterJet COMBO waterjet cutting machine was built in 2011 in Poland by ECKERT AS Sp. z o.o. The machine, designed for precision machining of workpieces with a maximum thickness of 250 mm, combines all the benefits of plasma and waterjet cutting. The machining process is performed on a robust, large work table by means of a powerful cutting head. All table travel components are protected by bellows guards to ensure uninterrupted operation for many years of use. The design made of high-quality closed steel profiles, in turn, guarantees the highest stability during even the most demanding challenges. The ECKERT Opal COMBO WaterJet is offered with, among others, CAD/CAM software and a 37 kW high-pressure pump. Technical specifications of the ECKERT Opal WaterJet COMBO water cutting machine - maximum workpiece thickness (water machining): 250 mm - feed rate: 25000 mm/min - w ...

Manufacturer: Trumpf Model: Trulaser 5060 Type of Machine: CO₂ Laser Cutting Machine Technical Specifications: Working Area: - X-axis: 6000 mm - Y-axis: 2000 mm - Z-axis: 115 mm Max. Workpiece Weight: 2800 kg Speed: - Axis-parallel: 200 m/min - Simultaneous (X and Y): approx. 300 m/min Accuracy: - Smallest programmable increment: 0.001 mm - Position deviation: ±0.1 mm - Average position scatter: ±0.03 mm CNC Control: - Model: Siemens Sinumerik 840D - RAM: 64 MB - Monitor: 12" TFT - Program memory: 500 MB for NC programs - Disk Drive: 3.5" - OS Platform: Windows NT Find more here - / Contact us at -

We are selling here a frozen meat slicer from the manufacturer FMS GmbH in a very good used and functional condition. The machine runs on 400 volts, completely stainless steel, rollable, passage 38 cm wide, for chopping frozen meat, workshop tested, dimensions W/D/H 70/95/90 cm, others on request.

Find more here - / Contact us at -

Find more here - / Contact us at -

M. No.: 7361205 Format (cm): 78 Equipment / Additional information: Safety barriers, side tables, air table, 1x reserve knife

Max. punching and shearing capacity: 400 kN For example, punches 20 mm holes in 15 mm steel Shears on the flat steel shear on 120 mm to 12 mm steel Further technical data on request With an assortment of stamps and dies as desired

Used-refurbished machine max. 1800 cuts/minute 8-48mm product thickness 2mm cutting accuracy External dimensions (HxWxD): 850x850x1500 mm

Max. workpiece length ... 3000mm Max. workpiece width ... 1500mm Max. sheet thickness... 12mm Laser power... 2000W Total power requirement ... 71kVA Machine weight ... 11500kg L x W x H ... 9800x5300x2000mm The machine is in good condition, possible to test under power.

2021 Kraft VPS-100/2500 Cardboard cutting machine VPS100 from Kraft The machine was built in 2021 and was used very little. VPS100/2500 Basic machine plus - 10 x tool for longitudinal machining - 1 x tool for cross processing - 2 x rubberized rollers as counter-cut or transport medium - 1 x upper pressure controlled in segments above the feed roller - 1 x control cabinet decoupled and integrated in the basic machine Additional: - Freestanding control panel - Automatic outfeed device - Automatic carton changer with 6 chutes (4 with side-by-side function) - Mguard router - Wireless 1D code scanner incl. interface - 3 free Kraft Boxdesigner licenses + 1 license on the machine Description With the VPS100 automatic box cutting machine you can finally produce the right packaging, at the right time, in the right quantity. Reduce your cardboard consumption to what is necessary ...

920 x 920 ED - Program Control Colour monitor Air table Formica side tables with air Spare blade

SK150 Underused 1500 kg/h capacity -3ºC to -28ºC raw material temperature pneumatic product dispenser Electrical power: 4 kW Electrical connection: 400V, 3F, 50Hz Power consumption: 9,2 A S. air pressure: 4-6 bar Hydraulic pressure: 80 bar Oil capacity: 80 L Cutting force: 25.000 N Dimensions Depth: 1420 mm Width: 996 mm Height: 1635-1700 mm Weight: 580 kg

Rego Herlitzius Kobold Bread Slicer Bread Slicer 10mm 230V - Creel machine - on castors - with lubrication - Cutting width 10mm - for max. 42cm loaves of bread Specifications: - Manufacturer: HERLITZIUS - Model: Leprechaun - Year of construction: 2005 - Power: 0.75 kW - Nominal voltage: 230 V 50 Hz Dimensions: Width: approx. 61 cm Depth: approx. 60 cm Height: approx. 115 cm

WEMTECH Dynamic Torch 150/300 plasma cutting machine was built in 2022 in Poland by WEMTECH CNC. The machine, designed for precision machining of workpieces, is distinguished by the use of modern technical solutions that guarantee excellent production performance for many years of use. The machining process is performed on a table with a large cutting area which is filled with water or other coolant. The use of this solution eliminates the need to undertake any further secondary processes, such as grinding. The work table also has sectional exhaust extraction. The individual sections of the extraction table are controlled by pneumatic cylinders. The axes are driven by a stepper motor with a gear wheel mounted on a cushioned sled. This drive effectively eliminates backlash, as well as ensuring the achievement of high acceleration and working speed. The plasma torch, on the other hand,  ...

2000 X 2-6 MM cut-to-length line was built in 2018. The line was specially configured for machining stainless steel in a start-stop system with a stationary guillotine and sheet pick-up from the discharge conveyor. Maximum production efficiency is ensured by the use of a special system that packs the sheets into bundles after cutting. Other proven solutions, in turn, guarantee many years of trouble-free operation of the line. The offered cut-to-length line has undergone a general overhaul and is in perfect condition. All components meet the safety standards required by the applicable directives, as confirmed by the CE declaration. The 2000 X 2-6 MM cut-to-length line is fully complete and consists of the following components: – scissor lift table – sheet metal decoiler 7.5 t – infeed and guide system – sheet metal straightening unit – double-side foiling system – gui ...

LANSUN CNC XG32.05 tube plasma cutting machine was built in China by Wuhan Lan-sun Technology Co., Ltd. The machine, equipped with a reliable plasma source with the highest energy efficiency, is used for precision 3D cutting of tubes with a maximum diameter of 190 mm. The machining process is performed by a torch centrally positioned above the tube to be cut. The rotating head with holder, in turn, guarantees perpendicularity of the cut in relation to the tube axis. The offered LANSUN CNC plasma tube cutting machine is new, unused. Technical specifications of the LANSUN CNC XG32.05 tube cutting machine - maximum tube diameter: 190 mm - maximum tube thickness: 40 mm - inverter plasma cutter: HUAYUAN WELDER LGK-100IGBT quality cutting thickness (steel): 0.3-22 mm rated input power: 17.8 kVA rated input voltage: 3x 380 V; 50 Hz rated output current: 100 A rated output voltage: 12 ...

KIMLA POWERCUT LF 1530 6 kW fiber laser for tubes and sheet metal was built in 2021 in Poland. The reliable machine built on a rigid monolithic body equipped with state-of-the-art fibre technology guarantees the achievement of very smooth and even edges along the entire length of the workpiece, regardless of the machined material. The sheets are cut with a high-quality 6 kW fibre optic beam on a steel work table with integrated automatic pallet changing system, which allows uninterrupted machining by simultaneous loading and unloading of the workpieces during the cutting process. All cutting parameters are programmed in the intelligent PC-CAM CNC controller, which allows for very fast and dynamic operation with excellent accuracy. The KIMLA fibre laser cutting machine is also equipped with an integrated cutting system, extending the machine’s machining capabilities to include the cu ...

Key data: 4000 mm, 2000 mm, 10000 W

4000 x 2000mm with Bytrans Extended

Key data: 3000 mm, 1500 mm, 12000 W

3000 x 1500mm - Extended cables for Mezzanine layout

Key data: 3000 mm, 1500 mm, 6000 W

3000 x 1500mm

Polar 78 ED, Year 1999 Display Program Airtable Table left Table right Etc. Available: 09/25

Cutter Duker Rex Hydro 65 Made of stainless steel Distribution cabinet made of special steel, inside the machine Control box integrated in machine housing Noise-canceling cover Bowl capacity: 65 liters Electric power: 15kW Voltage: 380V / 50Hz 3 N/PE

Payload: 1,300 kg Max. vacuum lifter: 4,000 x 2,000 mm Number of suction cups: 19 pcs. Dimensions LxWxH: 480 x 200 x 250 cm Weight: 1,400 kg

Laser power: 3,000 watts Type: A04B-0820-B342 Weight system: 750 kg Dimensions LxWxH: 205 x 75 x 120 cm Equipped with: -Stabilizer - Fanuc Power Converter DTU60/2/0/5S - CNC control Fanuc Series 31i-LB

Brand Hegla Type Cutting table Layered Fashion model VSG-H Serial Number 1104 Construction year Jun-95 Weight 3 tons Assets 19 kW Air pressure 6 bars Water pressure: 50Hz Length mm 3700 Width mm 3400 Working height mm 980 Min.-max. glass thickness 2 x 3mm to 2 x 6mm Number of cutting heads 2 cutting heads Separation heating and air cushion Automatic sequence for cutting, breaking, heating and separating functions. Electric connection 380/ 400V Photos/film available: Photos available

Key data: 45 mm, 130 mm, 13 mm

Punching force: 70 ton Punching capacity: Ø 28 in 20 mm steel Projection: 300 mm Scissors: 130 x 130 x 13 mm angle steel 90º 450 x 15 mm flat steel 45 mm round steel Notching: 100 x 13 mm Equipped with: - Electric length stop 1000 mm - Various accessories - 2 stations machine Country of origin: Spain Motor power: 7.5 kW Machine LxWxH: 2000 x 1200 x 2000 mm Machine weight: 2000 kg