cross used for sale

REX - TORWEGGE - HOMAG- BARGSTED - KALFASS - HOMS-410-K core layer production plant (also solid wood boards) Consisting of feeding roller, Package cross-cut saw HOLTEC's 121-SHKA,. more feed roller TRANSA, Rotary scissors type lift roller Solid wood loading portal, Loading system KALFA for planing machine REX, REX planing machine HOMS-410-K built in 2004. with RIP saw unit. Central RIP saw unit, upper and lower drum, Much sheet saw unit, Belt conveyor system 8 manual workstations circular saws, 12 x material import System. 12 x glue system. Glue press TORWEGGE Working length approx. 6600 mm,. 2 cross cutting, 8-speed The stack and cooling system, Stacking line, Conveyor roller conveyor Power 2500 sqm / 7 hours PLATTENAUSBESSERUNGS AND ROLL FORMING LINE BARGSTEDT/HOMAG Plattenausbesserungs line Doppelendprofilier line in TOP condition! Workpiece parameters of ...

Trenbandsäge Primultini 1100 with mechanization before and after the saw: -Task roller conveyor -Tilt table -Cross conveyor -Feed belt conveyor -Auszugsföderer -Drop link right -Repatriation -Board cross conveyor

Laminating line for pizza dough consisting of: Laminating line for pizza dough, consisting of: Extruder 3 x pressure roller Cross roller Calibrating unit Folding station 2. folding station Satellite head Flour shakers Cross roller Cutting station Transfer paper Manual rewinding

CNC Double column Coordinate Boring Machine with Deep Hole Drilling Support Kolb KBN G 120 Year of manufacture 1984 / Retrofitted with Heidenhain TNC 426 in 2006 Table size 4250 x 2200 mm Table load max. 14 t Table longitudinal travel X 3000 mm Main spindle cross travel Y 2180 mm Deep hole drilling support cross travel A - 2000 mm Spindle vertical travel Z 500 mm Distance between the columns 2640 mm; Spindle to table 100 - 1300 mm; Spindle diameter 224 mm Spindle drive motor rating 46 KW Spindle speeds 14 - 1400 rpm Spindle taper ISO 50 Drilling in steel ST60 : 100 mm diameter; Boring to 300 mm; Threading to M 125 x 3; Milling capacity 730 cm³/min.; Second support for Deep Hole Drilling Spindle speeds for BTA and ELB boring 315 - 3150 rpm High pressure cutting oil delivery to spindle Chip- and oil collection and separation via Centrifuge. Very good condition P ...

Acceptance bunker 3,550 x 6000 x H 1,560 mm, for bulk solids, with 3 dosing screws Universally applicable acceptance bunker for bulk material e.g. grains, wood chips, potatoes, waste... Conveying volume depending on bulk material 1 - 80 m3/h The pick-up bunker is filled from above on a easily accessible side of the acceptance bunker by means of a shovel loader. The access roads and exclusion zones must be marked in order to avoid accidents and damage to the bunker and its extensions by starting up. The three parallel, identical and directly driven snail trees transport the goods through a partition wall to a cross-arranged snail tree. The partition wall prevents the conveyed material from flowing back into the acceptance area. The product is transferred to the connected trough screw conveyor (TS 420 x 7,000) by the frequency inverter-controlled cross-screw, which is desig ...

Built in 1997 Size max 660 x 1.020 mm Equipment feeder: o continuous feeder o counter 1st folding unit: o 4 buckle plates o polyurethane-steel folding rollers o noise prevention 2nd folding unit: o cross-fold knife o buckle after cross-fold left o polyurethane-steel folding rollers 3rd folding unit: o third-fold knife o polyurethane-steel folding rollers delivery: o belt delivery ; working condition

Built in 1998 Size max 740 x 1.110 mm Equipment: feeder: o continuous feeder o counter 1st folding unit: o 4 buckle plates o polyurethane-steel folding rollers o noise prevention 2nd folding unit: o cross-fold knife o buckle after cross-fold left o polyurethane-steel folding rollers 3rd folding unit: o third-fold knife delivery: o belt delivery; working condition

Double-sided fully automatic hydraulic cutting - milling - drilling machine PADE NST double-sided fully automatic hydraulic cutting - milling - drilling machine Production of chairs, tables, frames, and furniture parts Max work length 2100 mm Tilt-10° â +45° Rotation-10° â +50° 2 saw blades diameter 400 mm 2 drilling heads left, right can be rotated through 360 °, 8 spindle cross-shaped grid M2fi2 2 additional horizontal drilling heads from behind can be rotated by 360 °, 8 spindle cross-shaped grid 2 milling spindles bore wave 30 mm 1 motor for longitudinal adjustment of 1.5 kW 2 Saegemotore 2.2 kW 4 boring Motors 2.2 kW

working width: 2.000 mm number of line wires: max. 16 distance of cross wires: 6\", 12\", 18\", 24\" od. 36\" distance of length wires: 1/2\" to 1/2\" wire diam. length wire: 2,5 - 3,25 mm wire diam. edge wire: max. 4,0 mm wire diam. cross wire: max. 3,25 mm wire diam. knot wire: max. 3,25 mm; ready for operation

Semi-automatic short-threaded cutting machine for the production of external and internal thread Gr. via cross slide: 160 mm Gr. via cross slide guide: 240 mm tip wiete 250 mm nSpindle=180-2240 rpm spindle bore: 61 mm gr. threaded length/deep 100/6 mm

Omam second hand line width 2000 mm for PP corrugated sheet extrusion Plastic • Omam extruder diameter 150 mm / 30 D • Main Extruder motor: Siemens DC motor 410 kW • 2-ways continuous filter change FCF 120-2V complete with hydraulic power unit • Melt pump Alfatech AT80 with motor and control panel • Omipa T-Die 2180 mm wide with thickness 5mm and pitch 5,9 mm • Nr.02 T-Dies 3mm thick / 4mm pitch • Caliber with anodized aluminum plates, complete with 5,5 Kw air blades and 3 vacuum pumps 1,1 Kw (x1), 2,2 Kw (x2) • Take-off roller – equipped with 8 rolls, 330 mm diameter, rubber coated, 5 Kw motor • Oven: 2500 mm wide, power 48 kw, infrared, with control unit • Ferrarini & Benelli Corona treatment complete with GTS8 15Khz generator and 2 fans for ozone extraction (0,25hp) • Cooling unit with 6 fans • Take off rollers - 4 rolls, 330mm diameter, rubber coated, 5 Kw ...

DOUBLE KNIFE GUILLOTINE WITH GLUE APPLICATOR Manufacturer_ F+R?Model_ 45/3400? Max. cutting length (grain direction)_ 3400 mm? Min. cutting length (grain direction)_ 1050 mm Cutting width (cross grain) continuosly_ 65/450 mm Cutting width (cross grain) discontinuosly_ 450/800 mm

Horizontal Lathe POREBA TCA 160 x 12 m Condition: very good, complete Technical details: Max. swing over bed 1600 mm Max. swing over carriage 1280 mm Max. swing over gap 1600 mm Turning length (between centers) 12000 mm spindle turning speed (min) 0.85 rpm spindle turning speed (max) 170 rpm The width of guide way 1100 mm Dia. of spindle bore 105 mm Taper of center sleeve 120/80 Feeds: bed slide/longitudinal 0,19-5, 0 mm/1 spindle rotation Feeds cross slide 0,095-2, 5 mm/1 spindle rotation Rapid travel-longitudinal/face 4000 mm/min Max work piece weight centre this centre 30000kg Max work piece weight with 2 steady rest 40000kg Faceplate diameter 1600 mm Metric thread 35 strokes-1-50 mm Whitworth thread 35 strokes-24-1/2 " Module thread Diametrical pitch thread Section of tool shank 70x70mm Travel of the top slide 0,095-2, 5 mm/1 spindle rotation Max.travel o ...

Automatic labeling machine designed for automatic sticking of self-adhesive labels on cylindrical packages (bottles, jars, cans, etc.) and on packages with rectangular cross-section. After equipping the machine with a packaging orientator, it is also possible to label packaging with irregular cross-section (oval, lenticular, etc.) A single label is stuck on cylindrical packages, while flattened packages can be covered with two labels at the same time. The labeller can work independently or cooperate with other devices in the technological line. It is possible to apply alphanumeric characters to the labels by hot printing through the marking foil. Efficiency: depends on the size of the package and label, up to 3000 pcs / h Max packaging dimensions: length - 80 mm, height - 300 mm Maximum dimensions of labels: length - limited by the size of the package, height - 165 mm  ...

Tech. Data VS 4 maximum strip width 250 mm, maximum advance length 400 mm Max band thickness 2.5 mm maximum band cross-section 600 mm2 Holding power sled pliers - up to 1,6 t Holding force holding pliers - up to 1 t Thrust - up 0.4 t Damping - hydraulic Feed accuracy +-0.01 mm (distance) Tech. Data VS 3 Max. Band width 160 mm maximum advance length 230 mm Max. Band thickness 2.5 mm, max. band cross-section 400 mm2 Holding force slide clamp up to 900 kg Holding pliers up to 600 kg, feed capacity 240 kg complete with instructions, control, cam

CNC Universal circular grinding machine SHU321C Brand new, never used. Control FANUC Series Oi-TC 2-axes machine. Diameter of grinding workpiece -external 8-320 mm -internal 30-250 mm Center height 165 mm Maximum grinding length -external grinding (center grinding) 710 mm -internal grinding (in chuck) 135 mm Maximum angle of table rotation -clockwise 3 degrees -counterclockwise 11 degrees Grinding wheel -dimensions for external grinding 450x50x203 mm -peripheral speed 35 m / sec Rotation angle of the grinding wheel ± 90 degrees Front saddle -30 degrees clockwise rotation angle -90 degrees rotation angle -speed range for external grinding 30-400 rpm Back saddle -size of the fixed center Morse N4 -Pinolite stroke 35 mm Cross feeding range 0.1- 4000 mm/min Range of longitudinal feeds 0.05-8 m / min Minimum cross feed 0.0005 mm Main motor power kW 5.5

Table length: 0 mm Table width: 0 mm Longitudinal X: 0 mm Cross Y: 0 mm Vertical Z: 0 mm Positions ATC: 0   Number of pallets: 0   CNC Brand: 0 CNC Model: 0 Control: MAHO CNC 432 Technical data Rotary table:diameter: 400 mm Longitudinal travel (X-axis): 400 mm cross travel (Z-axis): 350 mm vertical travel (Y-axis): 375 mm Table load max.: 160 kg Taper in spindle: 40 ISO Spindle speeds: stepless horizontal from: 20 rpm up to: 3150 rpm vertical from: 20 rpm up to: 3150 rpm Voltage 50 Hz 3x: 380 Volt Total power required: 9 kVA Machine´s weight about: 1600 kg Overall dimensions machine: Length: 1600 mm Width: 2200 mm Height: 1670 mm

Grinding length: 0 mm Grinding width: 0 mm Grinding height: 0 mm Wheel diameter: 0 mm CNC Brand: 0 CNC Model: 0 Technical data Table length: 500 mm Table width: 220 mm Grinding length: 550 mm Grinding width: 225 mm Grinding height: 200 mm Execution: hydraulic with automatic cycle Max. distance from table to spindle-centreline: 325 mm Longitudinal travel (X-axis): 500 mm cross travel (Z-axis): 250 mm Vertical travel (Y-axis): 300 mm Automatic cross-feed: from: 0 m/min up to: 2.5 m/min Table speeds: from: 0 m/min up to: 25 m/min Automatic vertical feed: from: 0.005 mm up to: 0.05 mm Vertical rapid traverse: 0.23 m/min Diameter of grinding wheel: 250 mm Width of the grinding wheel: 25 mm Wheel int. diameter: 76.2 mm Grinding wheel speeds: up to: 2100 rpm Voltage 50 Hz 3x: 380 Volt Grinding spindle motor: 3 kW Machine´s weight about: 1400 kg Overall dimensions machine: Length: 1850 mm ...

Longitudinal X: 0 mm Cross Y: 0 mm Vertical Z: 0 mm Ampere: 0 A CNC Brand: 0 CNC Model: 0 Control: CHARMILLES Operating hours: 171812 Technical data Working table: Length: 950 mm Width: 620 mm Max. dimensions of work piece: Length: 1260 mm Width: 690 mm Height: 360 mm Table load max.: 800 kg Longitudinal traverse (X-axis): 630 mm Cross traverse (Y-axis): 400 mm Vertical travel (Z axis): 160 mm U/V axis travel: +/-48 mm Resolution: 0.05 µm Taper-cut +/-: 30 ° Diameter of electrode wire: from: 0.05 mm up to: 0.33 mm Dielectric aggregate: Contents: 240 l Voltage 50 Hz 3x: 400 Volt Total power required: 15 kVA Machine´s weight about: 4100 kg Overall dimensions machine: Length: 2660 mm Width: 2610 mm Height: 2370 mm Various accessories: CNC control Automatic wire treading

Continuous plank gluing press Suitable for hardwood wood thickness: 11 to 45 mm. Max wood length 2600 mm Gluing bed length: 6 m. Cross-chain transport Angle transfer and loading in the press with side glue, PVAc glue press with bed 1.58 x 10 m., hot water heated, Bohqqiku Hydraulic unit with 15 kW, v-outlet saw cross saw with running Mechanization available for sizing Disrun Vakumm Stacking Device

Turning diameter: 0 mm Turning length: 0 mm Turret positions: 0 Positions ATC: 0   Number controlled axis: 0   CNC Brand: 0 CNC Model: 0 Control: FANUC 210i-T Technical data Distance between centres: 2000 mm Turning diameter over cross-slide: 370 mm Swing over bed: 554 mm Spindle nose: D1-11 Spindle hole: 104 mm Maximum turning length: 2000 mm Cross slide: Longitudinal travel (Z-axis): 1920 mm Transversal strocke (X axis): 290 mm Main spindle: Taper in spindle: Camlock: D1-6 CAMLOCK Spindle speeds: number (steps): 3 from: 16 rpm up to: 1800 rpm Taper in tailstock: Morse taper: 6 MT Spindle stroke: 178 mm Spindle diameter: 95 mm Rapid traverse:: 10 m/min Spindle motor: 11 / 7.5 kW Voltage 50 Hz 3x: 380 Volt Machine´s weight about: 4000 kg Overall dimensions machine: Length: 3300 mm Width: 1800 mm Height: 1700 mm Various accessories: 3-jaw chuck diameter: 400 mm 4-jaw chuck diamet ...

Used cutting system Schmidler S4 Built: 2005r Condition: in operation, very good Technical data The machine has the following equipment: 1. Fully automatic wood conveying with feed roller conveyor and feed and feeding cross conveyor 2. Under-table swivel cross-cut saw with 4-axis control saw blade d=720mm, 3. Universal milling unit 4 -axis, combi cutter 350 diameter,100/20-,40-,60 he combi, finger cutter 40/140, swallowtail cutter 45mm 4. 1x drilling rig (2.2 kW) - drilling direction horizontally 5. 1x slotted unit, sword 10/50/400mm (3.0 kW) - direction of operation horizontal 6. 1x drilling rig (2.2 kW)– drilling direction vertically from below 7. 1x Profiel cutter, d=120mm, L=250mm with dovetail cutter working direction vertically from below 8. Marking device vertical 9. Control board unit, cutter thickness 20mm, 10. Fully automatic beam turning station 11. Tran ...

Center height: 0 mm Center distance: 0 mm Spindle bore: 0 mm CNC Brand: 0 CNC Model: 0 Technical data Centre height: 102 mm Distance between centres: 375 mm Swing over cross-slide: 120 mm Swing over bed: 200 mm Spindle speeds: stepless from: 45 rpm up to: 3100 rpm Step-down gear: 1:5 Voltage 50 Hz 3x: 380 Volt Spindle motor: 0.5 / 0.9 kW Machine´s weight about: 300 kg Overall dimensions machine: Length: 2000 mm Width: 800 mm Height: 1400 mm Various accessories: Working bench: Length: 2000 mm Width: 800 mm Height: 900 mm Rear drive Drawer(s) Headstock with reduction gear 3-jaw chuck diameter: 110 mm 3-jaw chuck diameter: 110 mm 4-jaw chuck diameter: 110 mm Driving plate Macnetic chuck diameter: 100 mm Set of collets Drilling tailstock Hand rest Cross slide CNC

Longitudinal X: 0 mm Cross Y: 0 mm Vertical Z: 0 mm Ampere: 0 A CNC Brand: 0 CNC Model: 0 Technical data Working table: Length: 900 mm Width: 600 mm Max. dimensions of work piece: Length: 1200 mm Width: 700 mm Height: 400 mm Table load max.: 1500 kg Longitudinal traverse (X-axis): 550 mm Cross traverse (Y-axis): 350 mm Vertical travel (Z axis): 400 mm Taper-cut +/-: 30 /400mm ° Diameter of electrode wire: from: 0.33 mm up to: 0.10 mm Dielectric aggregate: Contents: 1200 l Air connect: 6 - 7 bar Voltage 50 Hz 3x: 400 Volt Total power required: 10 kVA Weight total installation approx.: 2850 kg Overall dimensions machine: Length: 2810 mm Width: 2600 mm Height: 2080 mm Various accessories: Cooling unit for fluttines: HITEMA

E.C.H WILL ROTEX – TRI Year: 1987. One real stand. Diameter 1.2 max width 96 cm 4 hole perforation Print 2/2 Cross cutter 2 cover feeder Counting and collecting, Stitching unit Folder, Square back press. Long side cutting/short side cutting Speed: 400 m/ min Max 60 stroke/ min Cross Cuter: 300 mm, 355 mm, 420 mm and 455 mm From spare parts have gears for sheet count, knifes, stitching heads, printing cilindars.

Longitudinal X: 0 mm Cross Y: 0 mm Vertical Z: 0 mm Ampere: 0 A CNC Brand: 0 CNC Model: 0 Technical data Working table: Length: 450 mm Width: 400 mm Max. dimensions of work piece: Length: 400 mm Width: 450 mm Height: 300 mm Table load max.: 200 kg Longitudinal traverse (X-axis): 200 mm Cross traverse (Y-axis): 300 mm Vertical travel (Z axis): 300 mm W axis: 230 mm Diameter of electrode wire: from: 0.3 mm up to: 3 mm Voltage 50 Hz 3x: 440 Volt Total power required: 4 kVA Weight total installation approx.: 850 kg Overall dimensions machine: Length: 1390 mm Width: 990 mm Height: 2080 mm

Micro hardness tester Vickers HV0,001 to HV 30 (depending on type) from 1 gram - all force levels force-controlled The FALCON 400 series are micro-hardness testers for a test force range of 0.001 to 30 kgf (depending on the type) for the micro Vickers, Knoop and Micro-Brinell hardness testing methods. The unique test force load system includes an electronic control system in the closed control circuit and sensor technology with force feedback. In addition to the electro-mechanical test force load, the FALCON is equipped with first-class mechanical and optical components. The innovative software functions of the I-Touch™ "control" allows the storage of results, creation and storage of test programs, overwashing of results (limit input), conversion to other hardness scales and curvature corrections for measurement on unplanned test surfaces. The digital / optical hardness impressio ...

TECHNICAL DATA: Mm useful width: 1600 02 Incoming tilting side brushes Cross rotary brush group Horizontal brush group Horizontal brush group Cross brush roller group Weight Kg: 2500 KW installed power: 11 Complete with 1000mm "Italmeccanica" carpet

Longitudinal X: 0 mm Cross Y: 0 mm Vertical Z: 0 mm Ampere: 0 A CNC Brand: 0 CNC Model: 0 Control: CHARMILLES Technical data Working table: Length: 560 mm Width: 440 mm Max. dimensions of work piece: Length: 1130 mm Width: 510 mm Height: 260 mm Table load max.: 500 kg Longitudinal traverse (X-axis): 318 mm Cross traverse (Y-axis): 218 mm Vertical travel (Z axis): 114 mm U axis: +/-48 mm V-axis: +/-48 mm U/V axis travel: 48 mm Taper-cut +/-: 30/65mm ° Diameter of electrode wire: from: 0.1 mm up to: 0.25 mm Forward feed for wire elctrode: from: 0.2 m/min up to: 15 m/min Max. coil weigth: 16 kg Dielectric aggregate: Empty weight: 4400 kg Contents: 240 l Generator: Cut capacity max. from: 300 mm2/min Voltage 50 Hz 3x: 380 Volt Total power required: 12 kVA Weight total installation approx.: 4500 kg Overall dimensions machine: Length: 3700 mm Width: 2600 mm Height: 2300 mm Variou ...

Center height: 0 mm Center distance: 0 mm Spindle bore: 0 mm CNC Brand: 0 CNC Model: 0 Technical data Centre height: 102 mm Distance between centres: 375 mm Swing over cross-slide: 120 mm Swing over bed: 200 mm Inner taper type: 20 W Spindle speeds: number (steps): 12 from: 45 rpm up to: 2800 rpm Taper in tailstock:: 2 MT Voltage 50 Hz 3x: 380 Volt Spindle motor: 0.5 HP Machine´s weight about: 300 kg Overall dimensions machine: Length: 2000 mm Width: 900 mm Height: 1500 mm Various accessories: Working bench: Length: 2000 mm Width: 1000 mm Height: 900 mm Rear drive Pneum. quick closing attach. Milling attachment Cross slide CNC: COMBITEC E-600

Center height: 0 mm Center distance: 0 mm Spindle bore: 0 mm CNC Brand: 0 CNC Model: 0 Technical data Centre height: 102 mm Distance between centres: 375 mm Swing over cross-slide: 120 mm Swing over bed: 200 mm Inner taper type: 20 W Spindle speeds: number (steps): 12 from: 45 rpm up to: 2800 rpm Taper in tailstock:: 2 MT Voltage 50 Hz 3x: 380 Volt Spindle motor: 0.5 HP Machine´s weight about: 300 kg Overall dimensions machine: Length: 2000 mm Width: 900 mm Height: 1500 mm Various accessories: Working bench: Length: 2000 mm Width: 1000 mm Height: 900 mm Rear drive Pneum. quick closing attach. Cross slide CNC: COMBITEC E-600

Code 93024 Description Chucking lathe Make Warner & Swaswy Model 0 - AC Serial No. 2083651 Year 1972 Swing over bed 200 mm Swing over gap 200 mm Swing over crossslide 200 mm Spindle bore --- mm Longitude: 140 mm Cross: 100 mm Chuck : 160 mm Bore: 20 mm Number of spindle speeds 32 Spindle speeds 58 - 2507 rpm Feeds Longitude and cross Motor power 5,5 kW – 380 Volts Accessoiries hydraulic 3 chuck coolant Condition Machine is in good condition.

Code 8529 Description CNC Bed milling machine Make Zayer Type 2200 BF 3 Machine nmb 52248 Year 1986 Control Fagor 8020 Table size 2200 x 800 mm Movement table (X) 1830 mm Cross traverse ram (Y) 1016 mm Vertical traverse milling head (Z) 1016 mm Spindle taper ISO 50 Max. Weight on table 4000 kg No. of spindle speeds 18 steps Spindle speeds 28 – 1800 rpm Feeds dir. Progr. X-Y-Z 3 – 5000 mm/min Rapids Longitudinal 5 m/min Cross 5 m/min Vertical 5 m/min Total Weight 10.000 kg Mainmotor 11 kW Power connection 38 KVA Voltage 380 Volt Accessories Milling head Horiz./Vert. with ISO-50 Hydr. tool clamping device Condition Machine is in good condition

Table length: 0 mm Table width: 0 mm Longitudinal X: 0 mm Cross Y: 0 mm Vertical Z: 0 mm Positions ATC: 0   Number of pallets: 0   CNC Brand: 0 CNC Model: 0 Control: PHILIPS 132 Technical data Table length: 740 mm Table width: 440 mm Longitudinal travel (X-axis): 500 mm Cross travel (z-axis): 300 mm vertical travel (Y-axis): 400 mm Taper in spindle: 40 ISO Spindle speeds: stepless horizontal from: 63 rpm up to: 4000 rpm vertical from: 63 rpm up to: 4000 rpm Feeds: stepless longitudinal from: 1.0 mm/min up to: 3000 mm/min transversal from: 1.0 mm/min up to: 3000 mm/min vertical from: 1.0 mm/min up to: 3000 mm/min Rapid traverse: long.: 5 m/min Rapid traverse: transversal: 5 m/min Rapid traverse: vertical: 5 m/min Voltage 50 Hz 3x: 380 Volt Spindle motor: 5 HP Machine´s weight about: 1700 kg Overall dimensions machine: Length: 1800 mm Width: 2200 mm Height: 1900 mm Various acc ...

x-travel: 400 mm y-travel: 250 mm workpiece height: 485 mm Control: ELESTA CNC 314 total power requirement: 10 kW weight of the machine ca.: 4000 kg dimensions of the machine ca.: m H A U S E R CNC - Controlled Vertical Precision Coordinate Grinding Machine Model S 3 – CNC 314 Year 1987 / 1998 partially reconditioned by Swiss-HTT # 0463 ____________________________________________________________ Table size, approx. 600 x 380 mm Max. load on table, approx. 300 kg Table travel, longitudinal, max. (X Axis) 400 mm Table travel, cross, max. (Y Axis) 250 mm Vertical adjustment of grinding head max. (W Axis) 450 mm Stroke of grinding spindle, max. (Z Axis) 120 mm Table Longitudinal and cross feeds (X/Y-Axis) 0 – 1.500 mm/min Speed of grinding head stroke 15 – 7.500 mm/mi ...

Technical data Centre height: 102 mm Distance between centres: 350 mm Swing over cross-slide: 120 mm Swing over bed: 200 mm Spindle hole: 20.0 mm Inner taper type: 20 W Taper spindle threaded Spindle speeds: stepless from: 55 rpm up to: 3000 rpm Taper in tailstock:: 2 MT Voltage 50 Hz 3x: 380 Volt Spindle motor: 1.5 HP Total power required: 2.0 HP Machine´s weight about: 500 kg Overall dimensions machine: Length: 1300 mm Width: 600 mm Height: 1300 mm Various accessories: pedal-operadet reversing switch 2 drawers Stepless speed variator Coolant system Lamp Headstock with reduction gear Quick closing attachment Cross slide with 90 mm stroke

max. wheel diameter: 400 mm gear width: 0 mm module: pinion diameter - max.: 254 mm axial cross angle: 90 ° total power requirement: 15 kW weight of the machine ca.: t dimensions of the machine ca.: m This machine is very suitable for precision production testing of spiral and hypoid bevel gears with shaft angle 90°. The gear spindle is vertical and the pinion spindle is horizontal. The pinion cone distance can be adjusted while the machine is working in order to find the optimal mounting position whereby the gear is loaded with a preset torque. The axial pinion position can be adjusted until the quietest meshing position of the traction flank is found. Likewise, the thrust flank can be tested during the return run. Marking compound is sprayed on both sides of the teeth so the flank contact pattern can be seen. Working cycles, as well as the positioning in the tooth gap, are automat ...

Control: SIEMENS SINUMERIK 840 D Operating hours: 29500 Technical data Number of axis total: 4 Number of spindles: 2 Distance spindle nose: 580 mm Swing over cross-slide: 100 mm Swing over bed: 145 mm Spindle hole: 50 mm Turning diameter: 100 mm Bar diameter with collet: 36 mm Clamping chuck diameter: 140 mm Carriage 1: Longitudinal travel (Z-axis): 320 mm Transversal strocke (X axis): 220 mm Carriage 2: Longitudinal travel (X-axis): 345 mm Cross travel (z-axis): 120 mm Turret slide: number: 2 Number of positions turret 1: 12 Number of positions turret 2: 12 Driven tools turret 1: 12 Driven tools turret 2: 12 Spindle speeds: 30/6000 rpm Spindle speeds: 30/6000 rpm Power of driven tools: 2.1 kW Plage vitesse de rotation rad./axial: 30/6000 rpm Collet bore: 36 mm Spindle speeds: stepless from: 40 rpm up to: 8000 rpm Back spindle: max. speed: 40/8000 rpm Power of back spindle: 26/21 kW st ...

Technical data Centre height: 102 mm Distance between centres: 375 mm Swing over cross-slide: 120 mm Swing over bed: 200 mm Spindle hole: 20.0 mm Inner taper type: 20 W Taper spindle threaded Spindle speeds: stepless from: 45 rpm up to: 3000 rpm Taper in tailstock:: 2 MT Voltage 50 Hz 3x: 380 Volt Spindle motor: 1.5 HP Machine´s weight about: 550 kg Overall dimensions machine: Length: 1200 mm Width: 700 mm Height: 1400 mm Various accessories: Base-mounted type:: 102-82.000 2 drawers Stepless speed variator Headstock with reduction gear Driving plate Adjustable tailstock Drill chuck Cross slide with 90 mm stroke Fixed steady

x-travel: 800 mm y-travel: 500 mm z-travel: 460 mm table surface area: 1000 x 500 mm spindle taper: SK 40 control: HEIDENHAIN TNC 150 spindle turning speed range: 31,5 - 3150 U/min feeds longditudinal/cross/vertical: 1 - 3000 mm/min rapid traverse longitudinal and cross: 6 m/min rapid traverse vertical: 4 m/min quill stroke: 110 mm distance spindle nose and table: max. 559 mm table load capacity: max. 500 kg total power requirement: 14 kW weight of the machine ca.: 3,1 t dimensions of machine L x W x H: 2,15 x 1,8 x 2,15 m Accessories: vertical head with hydr. tool clamping and quill retraction, solid table, coolant The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

x-travel: 600 mm y-travel: 450 mm z-travel: 400 mm table-size: 850 x 440 mm spindle taper: SK 40 control: HEIDENHAIN TNC 355 ATC: 32 Pos spindle turning speed range: 20 - 4000 U/min spindle drive: 5,9 kW quill stroke: 80 mm feeds longditudinal/cross/vertical: 1 - 2000 mm/min power feed x/y/z: 7200 N rapid traverse longitudinal and cross: 10 m/min rapid traverse vertical: 10 m/min total power requirement: 12 kW weight of the machine ca.: 3 t dimensions: 2,7 x 2,5 x 2,0 m Acc.: NC-dividing unit (=4th axis) make WALTER with 3-jaw chuck 160 mmø, vertical head with hydr. tool clamping and quill retraction, solid table, various tool fixtures, electron. hand wheel, coolant The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

x-travel: 2800 mm y-travel: 1000 mm z-travel: 1200 mm table surface area: 2000 x 800 mm rotary table dia.: 800 mm spindle taper: SK 50 spindle turning speed - stepless: 50 - 2000 U/min max. torque on the spindle: 3000 Nm spindle drive: 30 kW feeds longditudinal/cross/vertical: 2 - 2000 mm/min rapid motion -longitudinal/cross/vertical: 7 m/min control: SIEMENS control: SINUMERIK 850 M no. of tools in magazin: 56 workpiece diameter at full load: 114 mm wotkpiece diameter with 2 vacant positions: 200 mm workpiece length: 400 mm weight of tools max.: 16 kg tool changing time: ca. 8 - 9 sec internal coolant system feed: ja / yes total power requirement: kW weight of the machine ca.: 25,4 t dimensions of the machine ca.: 6,6 x 3,15 x 2,98 m = 5-axis CNC-bed-type milling machine with integrated NC-rotary table and NC-swivelling milling head - Acc.: tool pre-setting device, various tool fixtures ...

Technical data Centre height: 102 mm Distance between centres: 375 mm Swing over cross-slide: 120 mm Swing over bed: 200 mm Spindle hole: 45 mm Inner taper type: 38 F Taper spindle threaded Spindle speeds: stepless from: 90 rpm up to: 2600 rpm Taper in tailstock:: 2 MT Voltage 50 Hz 3x: 380 Volt Spindle motor: 1.5 HP Machine´s weight about: 550 kg Overall dimensions machine: Length: 1200 mm Width: 600 mm Height: 1400 mm Various accessories: Base-mounted type: pedal-operadet reversing switch Coolant system 3-jaw chuck diameter: 100 mm Quick closing attachment Drilling tailstock Lever operated cross slide

spindle diameter: 110 mm x-travel: 900 mm y-travel: 600 mm z-axis: 200 mm table length: 1020 mm table width: 860 mm taper MK: 40 Table size, approx. 1,020 x 860 mm Max. weight of workpiece 800 kg Table travel, longitudinal, max. (X) 900 mm Boring head travel, cross, max. (Y) 600 mm Boring spindle stroke (Z) 200 mm Vertical travel of cross beam (W) 635 mm Vertical distance between table and boring spindle 15 - 850 mm Distance between columns 950 mm Spindle Ø 110 mm Spindle taper internal/external ISO 40 18 spindle speeds 10 - 2,500 rpm Milling feeds of table, infinitely variable 1 - 6,000 mm/min 4 milling feeds of boring head 30 - 180 mm/min 6 boring feeds 0.01 - 0.39 rpm Accuracy of all 3 axes when the machine was new 0.003 mm Quick feeds for table, boring head slide, and boring spindle, max. 6,000 mm/min Spindle drive 6.2 kW Weight, approx. 9,000 kg Total electrical load  ...

Technical data Centre height: 102 mm Distance between centres: 300 mm Swing over cross-slide: 120 mm Swing over bed: 200 mm Spindle hole: 20 mm Inner taper type: 20 W Taper spindle threaded Spindle speeds: stepless from: 55 rpm up to: 3000 rpm Taper in tailstock:: 2 MT Voltage 50 Hz 3x: 380 Volt Spindle motor: 1.5 HP Machine´s weight about: 450 kg Overall dimensions machine: Length: 1200 mm Width: 600 mm Height: 1400 mm Various accessories: Base-mounted type: Knee-operated reversing switch 2 drawers Stepless speed variator Driving system for milling and grinding attachment Belt-tensioning device for milling/grinding att. Headstock with reduction gear Set of collets: W 20 Drilling tailstock Cross slide with 90 mm stroke

max. wheel diameter: 400 mm max. number of teeth: 150 max. module: 5 total power requirement: 16 kW weight of the machine ca.: 10 t Workpiece Ø, min./max. 30 - 400 mm Number of teeth 6 - 150 Module range, max. 5 Tool holder shaft Ø SK 30 / 20 Tool speeds 4,000 rpm Spindle drive max. infinitely variable 1.8 kW Feeds, longitudinal and cross 0.001 - 12 m/min Workpiece speed, max. (1.5 kW) C Axis 2,000 rpm Workspindle slide 400 mm Tool speed, max. 3,000 rpm Tool holder SK 30 Total electrical load, approx. 16 kW - 380 V - 50 Hz Weight, approx. 10,000 kg Accessories / Special Features BWO (HECKLER & KOCH) CNC Control model 785 H for altogether 7 axes. Input via monitor. The control has all the supervision and fault diagnosis features necessary for fully automatic working process. 2 workspindle units, left and right, which can be set at any angle. CNC controlled: Z and W Axes for tool cr ...

Table dimensions: - mm Motor output: 7,5 kW Spindle diameter: 40 mm reus: 6000 U/min Weight: 300 kg Year: 2018 Universal profiler Götzinger UP 1730 Machine for frontal and cross-side machining. Different application technology for wood products First-class surface quality of machined workpieces due to high speed, Particularly stable bearing of the milling shaft and through synchronous milling. Rapid tool change through one-sided mounted cutter shaft and through swiveling clamping device. The whole work process, such as clamping, pneumatic-hydraulic table feed with speed control (stepless) and fast reverse. By exchanging the milling segments and by changing the attachment points can be up to ten different with a single profile milling set Create profile companies. Technical specifications: Cutting depth max .: 30 mm Milling height max .: 150 mm Voltage cross section per stroke max. Softw ...

bore capacity in steel (diameter): 32,0 mm throat: 255 mm bore stroke: 120 mm morse taper: 4 MK table:: 385 x 335 mm turning speeds: 80 - 2130 U/min total power requirement: 1,1 / 2,2 kW weight: 125 kg range L-W-H: 460 x 900 x 1730 mm Furnishing: - Surface-machined work table - Height adjustable via rack and hand crank - Ground base plate with T-slots for clamping high workpieces - V-belt drive with balanced drive pulleys for smooth running - Adjustable drilling depth stop for precise infeed of the quill - Powerful 2-stage motor, speed range from 80 - 2130 rpm - Direction of rotation switch for clockwise and counterclockwise rotation included in the scope of delivery - Cross line laser device for comfortable work - Compact, stable cast iron construction in a modern design - Stable and polished steel column, designed for heavy use Scope of delivery: - Drill chuck arbor MK 4 / B 18 - Keyl ...

saw blade diameter: 350 mm cutting length: 430 mm cutting diameter: 135 mm turning speeds: 3.800 U/min Dust suction hood: 100 mm dimensions of saw-blade: 350 x 3,0/2,4 x 40 mm total power requirement: 3,0 kW weight of the machine ca.: 100 kg dimensions of the machine ca.: 1,6 x 1,0 x 2,0 m - Cross-cut and miter saws for cross-cut cuts - Miter adjustment on both sides (60 ° / 45 °), with fixed stop - Shift cut on one side up to 45 °, with fixed stop - Stable cast iron construction - Precise linear bushing guide on the tool slide hardened and ground steel shafts - manual saw feed - Saw blade infinitely adjustable in height - nozzle for opt. Suction Cutting data: - Cutting length at 90 ° = 430 mm - Cutting height at 90 ° = 135 mm - Cutting length at 45 ° = 310 mm - Cutting height at 45 ° = 92 mm Special accessories included: - 1x HM circular saw blade 350 x 3.0 / 2.4 x 40 mm Z = 1 ...

saw blade diameter: 420 mm cutting diameter: 200 mm Cutting height at 45°: 140 mm hole of sawblade: 50 mm total power requirement: 5,0 kW Dust suction hood: 100 mm weight of the machine ca.: 310 kg. range L-W-H: 1,6 x 1,0 x 2,0 m - Cross-cut and miter saws for cross-cut cuts - Miter adjustment on both sides (60 ° / 45 °), with fixed stops - Shifter cut on both sides (60 ° / 45 °), with fixed stops - Stable cast iron construction - Precise linear bushing guide on the tool slide hardened and ground steel shafts - manual saw feed - Saw blade infinitely adjustable in height - nozzle for opt. Suction Furnishing : - 5 kW motor - Saw blade can be tilted via handwheel and worm gear (Schifters cut) - Saw blade diameter 520 mm - Saw blade mounting hole 50 mm - Saw blade speed 2,800 rpm - 400 volt / 5 kW (S6 / 40%) motor with brake and automat. Star-delta motor connection - Machine weight ap ...