We use cookies to optimize our website for you and to be able to continuously improve it. By continuing to browse the site you are agreeing to our use of cookies.
Disagree
meta name="robots" content="all">
119,260 used machines on RESALE, but how to find them? Machine Search
maximum number of results exceeded > 1000
please refine your search
used
Technical data of the bale opener line: Manufacturer Cross Wrap Oy Ltd, Siilinjärvi, Finland Type BO 4000 Year of manufacture 2015 Quantity of opened bales 674 pieces Operating time only 3 days, exclusively by running in the entire line during new installation Opening time approx. 45 seconds per bale Bale dimensions (W x H x L) 1100 x 1100 x 1400 - 1900 mm Max. Bale weight 2,000 kg Conveying height of the system 1,400 mm Max. Conveying width of the system 1,200 mm Material to be opened RDF/MSW Availability of the line 98% Noise level of the bale opener line 85 dB(A) Total connected load 37 kW Rated current 125 A Operating display SIEMENS SIMATIC HMI Touch Control SIEMENS S7 ET200S Installation dimensions 8,463 x 2,890 x 3,960 mm (l x w x h) Scope of delivery: Feed conveyor 3,500 x 1,200 x 1,400 mm Feed conveyor to opener 1,500 x 1,200 x 1,400 mm Bale opener (gripper with knife) Special ...
used
Mitfahrende Ablängsäge Fabrikat Ledinek. Geeignet für den Längenzuschnitt von Leimbindern und KVH. Cross cut saw for gluelam beams. Servodrive
used
The following materials are available: Cover Liner Piston Water Jacket Connecting Rod Fuel Pump Any Parts
used
5-axis machine
used
Three crosscut saw MADREW DCKRR40 - year of production 2008 - user manual, CE - Polish manufacturer TECHNICAL PARAMETERS: 3 x 4 kW motor maximum cutting thickness 100 mm maximum cutting length 2940 mm maximum cutting width 300 mm minimum cutting length 460 mm disc diameter 400 mm feed speed smoothly adjustable 5-25 m/min spigot diameter 3 x 100 mm feed motor 0.75 kW rotational speed 2900 RPM dimensions (length/width/height) 450 x 140 x 140 cm weight 950 kg
used
Controlled cross table, cross sliding table, clamping table, clamping plate with T-slots, clamping angle, cross table NC, linear robot, coordinate table -Controlled cross table: was used as a soldering station -Manufacturer: Walko, cross table NC type PNC 500 -Table surface: 600 x 300 mm -Travel approx.: X 500 mm / Y 350 mm -Dimensions: 1050/1030/H1530 mm -Weight: 240 kg
1 roller movement: Machines No.: 0018 Drawing No.: 242 002 54 Roller speed length: 4 m Roll width: 300 mm Mounted with ball bearing rollers on profilesteel frames Drive by special gear motor Precision roller chain Spring-loaded length compensation 1 pull-off cross conveyor: Machine number: 0037 Drawing number: 147 501 46 Axle distance: 6.5 m Rank: 3 3/4" chain V2A built-in in roller aisle Transport of the cut material is carried out by roller link chain and screwed-on carriers Drive by gear edible motor Chain carriers made of profiled steel 1 pull-off cross conveyor: Machines No.: 0038 Drawing No.: 147 501 47 Axle distance: 6.5 m Rank: 3 3/4" Chain V2A built-in in roller aisle Transport of the cut material is carried out by roller link chain and screwed-on carriers Drive by gear edible motor Chain carriers made of profiled steel 1 pull-off cross c ...
used
tower silos 4 x 50 m³ / 50000 litres of polyester tanks / Tower silos / flour silos, GRP silos, grain silo / hopper silo / compound feed component silo Top condition Content per silo: 50 m³ / 50000 litres piece / pc: 4 pieces Year of construction: 1994 mass of Tower silos without steel: approx. Ø 2,80 x 12 m high Height of the entire system: 21 m Density/weight: 1,200 kg per m³ approval number: Z 10-22-42 Manufacturer: Polem More details: the silos are in good used condition. According to the age traces are present. The system has complete works until its closure. The system could not be tested yet, because there is no power supply. It is a complete meal silo plant with very thick-walled 4 x 50 m³ GRP silos with a density/weight 1200 kg per m³ is each silo separately to fill up the tanks through several cross conveyor (scraper conveyors). The silo is a spray head to cle ...
used
Cross table controlled, cross table NC, coordinate table, LM guide actuator, linear drive, coordinate table, precision table linear guide, CNC cross table -Cross table: with linear drives THK LM Guide Actuator KR -Travel path: x= 310 mm / y= 500 mm / z= 125 mm -Individual components: see photos -Dimensions: 750/550/H445 mm -Weight: 35 kg
used
Operating lever, cross lever, cross switch, cross toggle switch lever -Control lever: Cross toggle switch -Type: KSK 22/6 021652 -Voltage: up to 250V 10A -Dimension: Ø 81 x 137 mm -Weight: 0.3 kg
used
Cross support, cross support, cross table, cross slide table -Manufacturer: Kunzmann, top head from milling machine type UFV 600 -Dimensions: 530/420 / H730 mm -Weight: 80 kg
used
Wheel cross, wheel cross wrench, cross wrench WMW 24 / 27 / 32 / 36 width across flats: 24 / 27 / 32 / 36 mm New ! Dimensions: 755 x 750 x 52 mm
used
Cross table, cross slide table, clamping table, clamping plate with T-slots, clamping angle -Cross table for lid type: KF12 -Table surface: 400 x 400 mm -Travel: x 50 mm/y 65 mm -Weight: 60 kg
used
Cross table controlled, cross slide table, clamping table, clamping plate with T-slots, clamping angle -Transfer: in the current condition as seen -Y axis: measuring rail is defective -Cross table: comes from an erosion machine -Table surface: 450 x 340 mm -Travel: X 280 mm/Y 170 mm -Dimensions: 1000/1130/H950 mm -Weight: 728 kg
used
Upper support, cross support, cross table, cross slide table -Upper support comes from a Waldrich Coburg portal milling machine type: 12 D 3232-550 HL -Table surface: mm -Travel: x 350 mm/y 220 mm -Dimensions: 1380/1000/H800 mm -Weight: 800 kg
used
Cross-moving trolleys for the lateral transport of passenger cars, e.g. from the paint booth to the adjacent drying cabin. Make : Wolf and Lutro Track width: 580 mm or 600 mm Dimensions: 630 x 580 x 120 mm (WxLxH) Material: Aluminum or steel Weight: approx. 8.5 kg or approx. 12 kg We also have older cross-slide trucks from LUTRO, Hildebrandt, Durst etc. made of sheet steel with larger gauges in stock, e.g. 810 mm, 880 mm and 1000 mm. We also have complete painting booths, drying booths and spare parts for painting systems in stock, e.g. Aggregates, lights, filter ceilings, entrance gates, roller doors, gratings, air ducts, etc. Please ask. Please ask.
used
Leitz Wetzlar measuring microscope with cross slide and micrometer screws Extensive setting possibilities. Cross table, dislocation 0.01mm shift of the optics via micrometer screw possible. Dhxmkdfga Size approx. 40x Degree scale in optics via micrometer screw rotatable to the reference line Special price
used
Cross conveyor 7-stranded or individualized was built and designed as an individual of boards, posts and prisms Mass: Length 6.15 meters Width 1.75 meters Height 1.75 meters Rise angle 62 degrees and 53 degrees 7 strands with associated cross-conveyor elements 1.33 meters long
used
cross-flow fan, cross-flow fan, centrifugal fan, centrifugal fan, centrifugal fan ELECTRICAL APPLIANCES BAD BLANKENBURG QL II Type QL 2/1 7020.7/1 2 stages blower Motor : 25 W 220 V 50 Hz New Dimensions: 190 x 120 x 150 mm
used
Linear Bearing, Linear Rail, Linear Guide, Roller Guide Rail, Guide Rail, Cross Roller Guide -Manufacturer: Schneeberger, cross roller guide type 9700 -Hole spacing: 100mm M8 -Quantity: 4 pieces -Price per piece -Dimension: 705/22/H45 mm -Weight: 4.5 kg/pc.
used
Stereo microscope, floor microscope with illumination and cross table WILD HEERBRUGG type: M8 cross table: 300 x 210 mm, height: 120 mm travel x / y- direction: ± 75 mm measuring area: 165 x 165 mm glass measuring surface Objective height: min. 55 mm, max. 155 mm above measuring surface projection: 190 mm lighting: VOLPI Intralux 150H UNIVERSAL 230 V AC 50 Hz for lens diameter: Ø 70 mm ( outer) approx. 0.7 m Lighting cable with luminaire used, tested ! Dimensions ( stereo microscope ) : 380 x 300 x 565 mm dimensions ( VOLPI Intralux, without cable ) : 240 x 160 x 140 mm
used
Criss-Cross Auslage / Criss-Cross Receiving Tray Horizon SW-12 Year 2006 - Serial-No. 101117 -Online-Video-Inspection by Skype-Video- -We would be very pleased with your visit - more machines on Stock- -Available Immediately - Can be inspect- -On Stock Emskirchen / Nuernberg - Can be test-
R21746/11 HOBEMA Cross cutter Model: 101 A Built: 1969 Working width: 700 mm Availability: by arrangement with collecting cylinder Available: by arrangement
R22352/11 SCHWALBACH Cross cutter Model: BS 650 Built: approx. 1995 Working width: 650 mm Fully automatic Cutting length: 4 - 1000 mm Roll diameter: 300 mm max. Material: Soft and hard foils PVC laminated fabric 0.1 - 1mm Dimensions: 1000 x 600 x 1000mm (W x D x H) Available: by arrangement
used
Hexagonal socket wrench SW 10 x 7 mm deep, blade made of chrome - vanadium - steel and chrome-plated, blade length approx. 125 mm, shaft D = 8 mm, head D = approx. 14.80mm transverse stitch 90 mm made of polyamide GF 30,total length approx. handle approx. 155 mm. Caption on the cross handle: Made in Germany and on the blade Crom Vanadium 10 There is still a residual stock of approx. 600 pieces available. IT can also be dispensed smaller batch sizes. 1 - 600 pieces / VS €/piece
used
Cross off feed for roller conveyor L x W x H: 400 x 230 x 80 cm Weight 4000 kg Built in 1978 The machine is in good condition, ready to use. Subject to changes, errors, prior sale! Service/spare parts by MATEC CH-4900 Langenthal/DE-79618 Rheinfelden MATEC system + technik GmbH Mechanical engineering Eisenbahnstrasse 25 CH-4900 Langenthal/Switzerland Tel. 0041 62 966 18 32 Fax 0041 62 966 21 12
used
Cross conveyor for removal of boards L x W x H: 5 x 4 x 1 m Weight 3000 kg Built in 1978 The machine is in good condition, ready to use. Subject to changes, errors, prior sale! Service/spare parts by MATEC CH-4900 Langenthal/DE-79618 Rheinfelden MATEC system + technik GmbH Mechanical engineering Eisenbahnstrasse 25 CH-4900 Langenthal/Switzerland Tel. 0041 62 966 18 32 Fax 0041 62 966 21 12
used
Three T-slot plates of a copy-fraes machine from Lid are offered. The T-slot plates can be mounted as a cross table. Scope of delivery only according to photos, without spindles. If you are interested, please request more photos. Further spare parts of lide e.g. towing table of a KF3 pre-wheels. Please ask. Special price Lid cabinet tool cabinet
used
Cross slide unit with 2 spindles, for conversions or adaptations
new
Mobile package crosscut saw Holtec Caps star o package cross-section up to 1.25 m x 1.25 m o Round wood diameter up to 1.60 m o Electric motor 11 KW o Pointed tooth chain o Double-sided stellitierte rail (Quad reversible) o Bar length: 1.90 m
used
6x NUMMERATORS CROSS PLATE, FORWARD, SMALL No. of the Wheels: 7 Fig.Size: 3/16 Prefix Arm: RA
used
Technical data: Roll width: 1200 mm Length: 27 m Roll diameter: 168 mm Roller spacing: 800 mm Cut-outs: 5 PCs. Switching flag: 1 PCs. Power: 4,0 KW With built-in honing cross conveyor: Distance: 2.99 m Line number: 5 line Drive 2,2 KW
new
CROSS TABLE -Afmeting 600 x 240 mm -Panel verplaatsing 400 x 150 mm DUTCHMACH Metal working machinery ENSCHEDE - NETHERLANDS (3 km from the German border)
new
Item number 67379-0101 Transformer cross seam welding for Tetra Pak TBA 8 aseptic filling machine
used
achkettenquerförderer or Auschutisch with pull-off cross conveyor. Chains with roof chain takers. 5 chain strands. Length 5,900 mm. Spread width 2,000 mm. Total width 2,400 mm. Chain spacing: 750 - 750 - 1250 - 2000 mm. Fully plated. Drive via gear motor with 3 KW and adjustable slip clutch. Sprockets with clamping elements. Chain 80 x 40 x 6 mm. Technically reviewed and tested. Trial run possible.
new
Cross-flow scraper mobile version for the treatment of mixed waste fractions (municipal waste, biowaste, scrap metal, packaging, etc.) - Material input via vibrating chute - Efficient shredding in QSZ (1,600 mm) - Material transport via discharge belt below QSZ - Material discharge via conveyor belt (foldable) - Metal sorting by means of an overbelt magnet (neodymium) - Hook lift holder for transport - Motor power: 160 kW, 50 Hz, 400 V -Material discharge: screen discharge made of wear-resistant steel, screen plates are individually replaceable, Various hole geometries and sizes possible, external discharge box with flange connection for dust extraction - Contaminant discharge: discharge opening with hydraulically operated slider, incl. hydraulic unit and inductive end position sensors - percussion mechanism: chain mounting system for the use of up to fou ...
-350 mm x 2000 mm max wood cross-section -Circular saw blade D900 mm -Special saw was only about 5 hours in use after the overhaul >> Made in West Germany 100%
used
Cross belt grinding machine Ashton AIS / XDIA Model AIS/3350 / XDIA S/N XP 20100082 (by Glasmek AB Sweden, renovated in 2005) Manufacture: Ashton Industrial Sales LTD / UK Year of manufacture approx. 2000 Professional high-performance glass grinding machine 2x diamond bracelet transverse straps High-speed abrasives and diamond abrasives 400 V , 50 Hz Ball roller tables for easy movement of the glass panes. Table dimensions: L x W x H = 3.85m x 1.20m x 0.9m Weight 600 kg CE marked
used
Cross brushing machine Brushing machine used for dedusting chipboard and MDF boards; -min workpiece length: 300mm; -max passage height: 120 mm; -Minimum extraction rate at approx. 28 m/s: approx. 3500 m³/h; -Workpiece feed by rubberized pairs of infeed and pull-out rollers; -Height adjustment via handwheel with digital display; -Brush pressure adjustable; -Nominal power approx. 2.3 kW.
used
Cross-flow fan, centrifugal fan, centrifugal fan, centrifugal fan SEL QLZ 06/0018 A192 3025LH-14 roller: 188 5 x 60 mm Air outlet ( outside ): 185 x 40 mm Motor : 28 / 17 Watt 220 V 50 Hz New ! Dimensions: 260 x 100 x 85 mm
used
Technical data baler: Manufacturer BOA Recycling Systems B.V. Type Impress D225-165-D-5V/5H-1.6 Year of manufacture 2022 Operating hours 1,486 hours, as of June 2023 Pressing force main press 2,211 kN or 211 t Specific pressing force 17.5 kg/cm² Working pressure 280 bar Press stroke main hydraulic cylinder 2,900 mm Average cycle time 23 seconds Dimensions of feed chute 1,620 x 972 mm Volume of press chamber 4.4 m³ Bale dimensions 1,100 x 1,200 mm, length variable Drive power 3 x 45 kW Total connected load 250 kW, 500 A Tying system 5-fold vertical, 5-fold horizontal, fully automatic Throughput rates with a bulk density of 30 kg/cbm up to 20 t/hour Bulk density of 60 kg/cbm up to 33 t/hour Bulk density of 100 kg/cbm up to 46 t/hour Bulk density from 150 kg/cbm up to 56 t/hour Bulk weight from 200 kg/cbm up to 69 t/hour Bale weights up to 1300 kg, depending on material Hydraulic oil tank ...
used
Technical data baler: Manufacturer BOA Recycling Systems B.V. Type Impress D225-165-D-5V/5H-1.6 Year of manufacture 2022 Operating hours 1,568 hours, as of June 2023 Pressing force main press 2,211 kN or 211 t Specific pressing force 17.5 kg/cm² Working pressure 280 bar Press stroke main hydraulic cylinder 2,900 mm Average cycle time 23 seconds Dimensions of feed chute 1,620 x 972 mm Volume of press chamber 4.4 m³ Bale dimensions 1,100 x 1,200 mm, length variable Drive power 3 x 45 kW Total connected load 250 kW, 500 A Tying system 5-fold vertical, 5-fold horizontal, fully automatic Throughput rates with a bulk density of 30 kg/cbm up to 20 t/hour Bulk density of 60 kg/cbm up to 33 t/hour Bulk density of 100 kg/cbm up to 46 t/hour Bulk density from 150 kg/cbm up to 56 t/hour Bulk weight from 200 kg/cbm up to 69 t/hour Bale weights up to 1300 kg, depending on material Hydraulic oil tank ...
new
Bosch Rexroth 3842998012 Transverse Transport ELT Cross Conveyor 38422 998 012 EPA Item Condition: Used Available for belt spacing a = 60 mm or a = 135 mm Lifting cylinder – D = 25 mm Total stroke: 13 mm Pumped medium: Timing belt with fabric support, suitable for use in an EPA H1R6B11K4-3-PD 5.0 kg You can find more conveyor technology - new and used - in our shop! International shipping costs on request!
used
Crosscut and miter saw, pull saw, chop saw, aluminum circular saw, metal circular saw, metal cutting saw, underfloor circular saw with double miter -Manufacturer: Pressta Eisele, underfloor circular saw with double miter -Motor power: approx. 1.5 kW -Speed: approx. 2820 rpm -Saw blade: Ø 350 mm, swivels left 45° / right 90° -Cutting area: 90° flat 270 x120 mm -Cutting area: 45° flat 210 x 120 mm -Workpiece clamping: pneumatic horizontal clamping devices left and right -Cross stop: movable -Transport dimensions: 860/730/H1250 mm -Weight: 175 kg with pallet
used
Crosscut and miter saw, pull saw, crosscut saw, panel saw, crosscut and miter saw, radial saw, radial arm saw -Manufacturer: Elu, cross-cut and miter saw with table on solid base, mobile -Type: MGS 72 -Motor power: 0.85/1.2 kW -Speed: 1050/2100 rpm -Saw blade: Ø 305 mm -Cutting height: max.110 mm -Cutting width: max. 120 mm -Miter. 45° on both sides -Dimensions: 2100/840/H1180 mm -Total weight: 190 kg
used
Industrial Robot, Robot, Robotics, Servo Motor, Electric Motor, DC Motor, Stepper Motor, Stepper Motor, Stepping Motor -Manufacturer: Berger Lahr, robotics robot cross table -Servo motors: SER397/4L3SS0TO 3 pieces -Linear units: LM-A504KT100-250 / LM-H404K-700-LW230 / LM-P404KT100-1200 -Individual components: see photos -Traverse paths: x=670 / Y=360 / z= 1260 mm -Total dimensions: 1405/590/H1650 mm -Weight: 74kg
used
Load turning device, load turning beam, load turning device, load beam, adjustable beam, crane beam, beam for pillar slewing crane, indoor crane, workstation crane, chain hoist -Crane cross member: adjustable, for the transport of different loads -Load capacity: 6500 kg -Hook spacing: min. 1460 mm / max. 2880 mm -Steel rope: O 22 mm, length 1580 mm -Dimensions: 3025/190 / H945 mm -Net weight: 230 kg
used
Profile milling machine Bäuerle - Cross section milling machine Type: PM 510 Machine No. 126/91 Year of construction: 1991 Table size 1250 x 410 mm Tool span 510 mm Tool flight circle diameter max. 250 mm Milling height max. 250 mm Milling depth 65 mm Milling spindle diameter 40 mm Table height 870 mm Motor power 18.5 kW, 380 V, 50 Hz, 35 Amp. Working cycles per minute max. 6 Operating pressure max. 6 bar Air consumption 140 l/min. Feed speed 0 – 4.5 m/min. Revolutions per minute at flight circle diameter 180 mm 6000 rpm Revolutions per minute at flight circle diameter 200 mm 4800 rpm Suction nozzle diameter 160 mm with 16 mini tine milling cutters 15 mm cutter width on 500 mm total width with instruction manual Weight: 780 kg Machine dimensions L 1250 mm x W 1270 mm x H 1600 mm
used
Optimizer PAUL 11 MKL - German production - year of production 2001 - full optimization - cutting cycle time 0.4 s main engine power 5.5 kW cutting width max. 180 mm cutting height max. 90 mm blade diameter 500 mm cutting cycle time 0.4 s max. material length 3500 mm min. material length 300 mm feed speed max. 200 m / min acceleration of 25 m / s2 automatic feeding system seven ejectors 4000 mm long cross chain feeder length of the receiving table 11500 mm stub diameter 2 x 125 mm
used
HIGH SPEED DOWEL CROSS-CUT AND CHAMFERING MACHINE LOSER MOD. AA220 - Range of working diameter: 6 - 18 mm - Capacity: about 7,500 - 15,000 dowels/hour