136,861 used machines on RESALE, but how to find them? Machine Search
New machine 24 months warranty Advantages: + tested by our master baker and confectioner with various doughs + very solidly built, power transmission with belt drive + no high voltage current necessary - operation with 230V possible! + with 4 feet and permanently installed boiler + mobile machine, on swivel wheels with parking brake + short kneading times with excellent results + with reverse gear, for mixing the ingredients before the kneading process + 10 kneading speeds, for particularly gentle to intensive kneading + 2 timers, with automatic switchover & switch-off + ideal for smallest batches + Stainless steel boiler, central rod and spiral + transparent flour dust cap with automatic switch-off + fast spare parts supply within 1-2 working days Specifications: - Flour capacity: 1 - 8 kg - Dough capacity: 1.5 - 12 kg - Boiler volume: approx. 20 litres - Motor p ...
Traenklein BRM; good ZUustand; cleaned and checked; Working width 500mm.; Ready. At this point we allow ourselves to note that all offered machines are in our unrestricted possession or access and are present in our warehouse. Visits and demonstrations are possible on request in our premises. We would also be pleased to inform you about our complete stock, as only part of our portfolio is presented here.
New machine 24 months warranty Advantages: + tested by our master baker and confectioner with various doughs + very solidly built, power transmission with belt drive + no high voltage current necessary - operation with 230V possible! + with 4 feet and permanently installed boiler + mobile machine, on swivel wheels with parking brake + short kneading times with excellent results + with reverse gear, for mixing the ingredients before the kneading process + 10 kneading speeds, for particularly gentle to intensive kneading + 2 timers, with automatic switchover & switch-off + ideal for smaller batches + Stainless steel boiler, central rod and spiral + transparent flour dust cap with automatic switch-off + fast spare parts supply within 1-2 working days
Bickel HK 3/50; good condition; Working width 500mm; Stand model; with slot and perforating tool; Foot Switch. ; ready to go. At this point we allow ourselves to note that all offered machines are in our unrestricted possession or access and are present in our warehouse. Visits and demonstrations are possible on request in our premises. We would also be pleased to inform you about our complete stock, as only part of our portfolio is presented here.
New machine Stainless steel model 24 months warranty Advantages: + robust, compact machine + easy maintenance and cleaning + suitable for long-acting smaller dough pieces + ideal for wrapping sandwich rolls + secure dough input + Conveyor belts made of felt + Output plate is height-adjustable + very practical in combination with a bread press + fast spare parts supply within 1-2 working days Specifications: - Long roll width: max. 180 mm - Weight range: 20 - 80 gr (depending on dough) - Hourly output: approx. 2,000 pieces (depending on dough) - Motor power: 0.37 kW - Power loads: 230 V - 1Ph - 50Hz - Dimensions: 280 x 475 x 280 cm (WxDxH) - Height input tube: 45 mm - Net weight: 26 kg
SERON 1315 EXPERT CNC milling machine built in Poland in 2017 is new and has never been used. The machine designed and manufactured with attention to the smallest details, is used for precision machining of a wide range of materials such as mild metals, plastics, carbon, wood, wood-like panels and glass. All vibrations and deformations during the milling process are eliminated by the high-quality ribbed steel construction with a T-slot table made of aluminium profiles, with a length of 1500 mm and a width of 1300 mm. The workspace is additionally equipped with a special PVC overlay to protect the table cover while cutting the workpieces through. At the end of the table there is a six-position linear magazine with an automatic tool correction sensor. The 1315 EXPERT machine axes are driven by highly dynamic and precise brushless AC servo drives with back pressure, equipped with serv ...
Embalming machine Embalming plant Embalming device Individual contract production for a Dutch university by the (fluid) mechanical engineering company Hellebrekers Technieken. Year of construction: 2014 Device for automatic embalming with very high quality components. Electronics from Siemens: - Sirius motor circuit breaker - Sirius Sagittarius - Sirius safety relay - Simatic S7-1200 with Simatic Touch Panel Electronics from Weidmüller: - RJ45 hub -Power supply Sensors from ifm: - electronic pressure sensor PI003A - Switching amplifier N05.. A - SM6000 electromagnetic flow sensor Pressure retaining valve from Stübbe: - DHV 718 Versa Matic tank filling pump: -E8PP5BPP9 pneumatic fluid pump Heukelom embalming pump: - TS057G. (EX version) Eldon stainless steel enclosures: - MCSS18085 - ASR0604021 - ASR0504021 ...
CATALOG NO. 6946 TECHNICAL SPECIFICATIONS - max width of the workpiece 210mm - max thickness of the workpiece 120mm - number of spindles 2 pcs - spindle diameter 50mm in advance: - 3 insertion, pulling, rubber, smooth shafts including 2 double - 2 leading, rubber, pulling shafts including 1 double - heads on supports - head adjustment up / down - electric height adjustment of the upper head - electrical setting of planing thickness - spindles equipped with a brake - main motor 2×5,5kW - smooth regulation of feed speed - feed motor 3kW - feed on cardan shafts - diameter of extraction connection 2x160mm - dimensions length / width / height 2350x1780x1950mm - weight 1882kg – German production – jointers – for sharpening knives on the head – 2 Hydro heads included – unpainted – very good condition, used planer Net price: 33900 PLN Net price: 7533 ...
CATALOG NO. 6985 TECHNICAL DATA - max width of the workpiece 300mm - height of the workpiece 200mm - unit: corrugated rubber roller + shoe + metal roller - working table 1230x440mm - belt 300x1900mm in advance: - rubber roller, sliding - aggregate about 7.5 kW - sliding roller, rubber from down: - pulling tape - pneumatic oscillation - 2 types of feed speed - feed motor 0.85 kW - diameter of the exhaust connection 110mm - dimensions length/width/height 1250/1000/1950mm - weight 530 kg – unpainted – used grinder - very good condition Net price: PLN 13900 Net price: 3124EUR Net price calculated according to the exchange rate of 4.45 PLN/EUR (with larger exchange rate fluctuations, the price may change)
BIZETA BZ3T4P/8 welding machine was built in Italy in 1989. The machine is designed to perform a very precise and accurate welding of materials such as PVC and polyester by subjecting the surface of the material to high-frequency energy. Electricity in the form of an electromagnetic field generates heat, which softens the material and fuses its layers together. At the end of the process, the BZ3T4P/8 welding machine with rotary table cools the material surface while holding it under a high pressure, resulting in the formation of a very strong weld. The total weight of the machine is 3400 kg. Technical parameters of the high frequency welding machine BIZETA BZ3T4P/8 - maximum welding force: 9000 kg - maximum punching force: 3000 kg - power: 22 kW - nominal operating frequency: 27.12 MHz - maximum electrode power efficiency at high frequency: 10 kW - number of work heads: 3, inclu ...
Material width until 820 mm PET 12 to 20my OPP 15 to 75 my BOPP 12 to 75 my OPA 30 to 50 my Paper 45 to 110 g/m2 Composite foils with aluminium 40 to 250 my Composite foils without aluminium 40 to 250 my Main functions of the machine Previously used for priming and varnishing various plastic films and composites, also used after digital printing. Technical specification Unwinding Roll diameter Up to 1 000 mm Core diameter 76 and 152 mm Roll weight Up to 1 000 kg Side edge control FIFE DP-30 Web Guide Controller. Pre-treatment station Corona AHLBRANDT TG 3104-TP Gravure coating unit 2 coating carriages 1 for primer and 1 for varnish. For coating cylinders circumference 350 to 860 mm. Bale width 900 mm Some coating cylinders. With circulating air up to 120°C Dryer length 2 x approx. 2.2 m Thermo oil ...
Vollmer CHHF 21 H - Machine for single-sided grinding Year of construction: 1989 S/N 907 Make: Vollmer Germany in good working condition The technical data of the CHHF 21H at a glance: Circular saw blades Outer diameter 80 to 700 mm Bore diameter 20 to 105 mm Tooth pitch from 8 mm Hook angle up to 30° Radial clearance angle -7° to +3° Tangential clearance angle up to 5° Connected load approx. 0.52 kW Weight approx. 85 kg Dimensions: 70 x 50 x 80 cm Cisei8tfrg This machine has been specially designed for the repair of lack of carbide teeth. Newly inserted tips are used in the existing teeth. With this tabletop version, VOLLMER offers a a particularly economical, space-saving solution. The CHHF 21 H works according to the wet grinding process. During the grinding process, the grinding unit manually moved over the tooth flanks, with the saw blade Saw blade ...
Weibert form7 4-way combination machine Be hem length 2250 mm option: 2600 mm Cutting height at 90 ° / 45 ° 100 / 79 mm Cutting width on the parallel fence 820 mm Saw shaft speed 4000 RPM. Blade tilt 90-45 ° Planing width 300 mm 3 blade shaft Tersa Feed speed 7 m / min Max tool diameter 210 mm Max tool diameter retractable 180 mm Spindle speed 3500/ 7000 / 10000 RPM Spindle diameter milling - saw 30 mm Engine power 400 V / 50 Hz / S6 - 40% 3 x 5,0 kW -. Weight 525 kg G & pieces 5500309
Year of construction: 1980 Running direction: Left – right Pitch: 95 mm Siemens S7 controller, Danfoss frequency converter With a stainless steel control cabinet. Equipped with 3 sets of parts for the following bottles: 0.5 l NRW, 0.5 l Euro, 0.25 l Ale, 0.33 l Ale & 0.75 l Gastro. Machine is CIP capable. With electric height adjustment. Modernization and service by arrangement. The machine is in good condition and still in operation. A visit is possible by arrangement Year of construction: 1980 Working direction: Left – right Pitch: 95 mm Siemens S7 control and a Danfoss frequency converter. Installed in a stainless steel switch cabinet. Equipped with 3 bottle guiding parts for: 0.5 l NRW, 0.5 l Euro, 0.25 l Ale, 0.33 l Ale & 0.75 l Gastro. Machine is CIP able. Height adjustment of the filler bowl and closing machine by electrical gear motor. Reconditioning / ...
Weibert form7 52 digital Dressing thickness Planer Planing width 520 mm Tersa 4 drum Dressing table length 2250 mm Planing stroke 1500 mm 90 °-45 ° Machine cast iron tables 7 KW (9,5 HP) 400V 50 HZ Thicknessing table 850x520mm Passage of 3 / 240mm Electrical height adjustment of the Thicknesser table 4 speeds 5 / 8 / 12 / 18 m / min Dual opening system of the tables to the rear Max depth of cut 5 mm Speed 5000 min/1 1-suction port 120 mm Weight approx. 700 kg G & PIECES 5503511
Krones Solomatic Right-to-law machine Ma-No. 018-D53 Torso-chest back labeling Hot melt device for sealing labels Central lubrication Height GDB program + 0.75 / 0.25 excl. Gluing via lifting motor 2 label magazines 2 aggregates external control cabinet Heuft Spectrum TX with Pusher Format parts, gripper heads and screws available Krones Solomatic Right-hand machine Ma-No. 018-D53 Body-chest-back labeling Hot melt gluing device for sealing labels Central lubrication Height adjustment GDB program + 0,75 / 0,25 excl. Gluing via lifting motor 2 Label Magazines 2 aggregates external switch cabinet Heuft Spectrum TX with pusher Format parts gripper heads and screws available
Hettich-blue-mini-MAX Hardware drilling machine Type Blue-Max-mini Spindle number 4 Table-top model Motor 0.75 KW 400V 50 Hz Masch. No. 01395 Manual drill feed without stand (optional) Built in 1995 G & 2827-M3I2J
34"/44" x 60" Mazak gap bed lathe Model: Rex, Specifications: Swing over bed ways . 34" Swing in removable gap .. 44" Swing over cross slide .. 24-1/2" Distance between centers 60" Hole thru spindle ... 4-1/16" Spindle nose D1-11" camlock Width of bed 22" Spindle speed range (16) 12 - 1200 rpm Longitudinal feed range . .00217" - .0331" ipr Cross feed range half of longitudinal setting Inch threading range (40) ... 4 - 56 tpi Metric threading range (23) . .5 - 7 mm Tailstock spindle travel 8" Tailstock spindle taper . #6mt Approximate floor space . 144"L x 60"W x 60"H Approximate weight .. 12,500 lbs
Table machine RMH 52 for peeling cables. 18 meters per minute, 230 V Diameter of cable: 1-52 mm
Serial No. FH. DMA0-00272, The Twinstacker TSH Vertical Stack Delivery Is The Economical Solution To Broadly Cover The Medium To High Capacity Range. The Delivery Transports The Individually Pressed Sheets Through The Belt Section Without Marking. Subsequently, The Stacks Are Formed From The Top In Catch Baskets And Laid Out Alternately – In Two Stacking Levels Arranged One Above The Other. This Enables Effective Non-Stop Operation. The Simple Handling With Good Accessibility Also Facilitates The Processing Of Multiple-Ups. The Height-Adjustable Feed Table Ensures That The TSH Twinstacker Can Be Positioned Easily And Flexibly At The Various Preliminary Stations. Whether Laying Out Isolated Sheets Or Even In A Shingle Stream – The Twinstacker TSH Convinces In Every Respect With Its Performance. User-Friendly Stack Delivery, Mark-Free Laying Out Up To Two Uses, With User-Friendly Ergon ...
NEW ex works semi-automatic chamfering machine Development and production in England - automatic chuck with material sensor - Automatic spindle start when the cutting head is moved - Max. speed 1,500 rpm - max. rod diameter 80 mm - Adjustable bar flag - max. chamfering/turning length 37 mm - Incl. turning and chamfering tool - Precision three-jaw chuck - large chip collection container for easy cleaning - easy to move with pallet trucks - Weight 500 kg Dimensions L/W/H 800x500x1250 mm 1 year warranty CE - certified OPTION: - Oil cooling (fog) € 1.850,- - adjustable stop + universal chamfering tool € 1.650,-
This machine is particularly suitable for the processing of electric wastes with PVC and rubber. Hole Guide for small diameter from 1 to 10 mm. Quick clamping diameter setting for the large diameter. Adjustable pressure roll continuously over a quick Collet with one hand adjustable. Holes on the base plate to the fasten the machine on a table or work bench.
Rotary table polishing machine make Bula, model MP81 for sale. Continuously circulating machine for polishing, brushing, grinding and deburring a wide variety of workpieces. 6 workpiece holders mounted in a pitch circle of 250 mm. 1 processing station, drive power 2.2 kW, with Bula Quick Lock system of polishing wheels. Polishing shaft diameter 25 mm The machine has been completely overhauled, machine body sandblasted, primed, repainted, new bearings, new motors, new gearbox, new V-belts, new handwheels, new pulleys, completely new control cabinet, and all drives are controlled by frequency converters. Subject to prior sale. Optionally, the system would also be available with a polishing paste system - liquid, consisting of 1 high-pressure dosing guns WIDOBERG HDP-2, holder, timer, etc. and pressure container.
Table machine RMH 65 for peeling cables. 18 meters per minute and 230 V 25 meters per minute and 400 V diameter of cable: 1-65 mm
Table machine RMH 65 Q for peeling cables. 18 meters per minute, 230 V with anti-crushing device 25 meters per minute and 400 V with anti-crushing device Diameter of cable: 1-65 mm
High-performance deburring system for internal and external deburring of profiles and tubes in a single operation (approx. 3 sec.) Powerful industrial geared three-phase motor, frequency-controlled, for infinitely variable settings of the required speed: 600 - 2,700 1/min, for deburring pipes and profiles with material dimensions horizontal/vertical 120 mm, Easily adjustable work table height (adjustable and lockable) for the appropriate material size adjustable, lockable infeed (carriage) of the deburring brushes to the work table by means of a handwheel with locking function. Drawer for dust residues. Sheet steel housing with prepared for connection to an external extraction system. Housing hoods foldable for changing the brushes. Machine body RAL 7035 Side cover: RAL 7005 1 set of machine feet with adjustment screw. 3 deburring round brushes 250 x 60 / 0.35 mm corrugated st ...
Antriebswalze 1 Stück / roller 1 piece Eurofold / Foldmaster Manufacturer Number: 235.100.321 Drive roller We offer different versions of rollers for Eurofold 235 / 435 / Foldmaster 200 folding machines Preis ist für eine Walze / Price is for one roller Art.: PS2811 depending on the one we have in the warehouse at the moment. They can be rollers with rubber rings or fully rubberized rollers. Fully rubberized rollers provide good adhesion to the paper and thus better paper transport. After your inquiry we will give you further information. Possible spare part number: 235.100.321 - Drive roller 235.000.889 235.000.888 435.100.001 235.000.887 For FoldMaster, ET numbers: 235.000.523 235.000.524 235.000.522 435.000.109
Table machine RMH 85 Q to peel by cable. 18 meters per minute, 230 V with anti-crushing device 25 meters per minute and 400 V with anti-crushing device Diameter of cable: 1-85 mm
This machine is particularly suitable for the processing of electric wastes with PVC and rubber and is almost entirely made of aluminium. Heavy drive wheels enable the modification of large cable diameters. Hole Guide for small diameter by 1-52 mm. Hole Guide for large diameters of 30-100 mm and 30-120 mm. The RMH 100/120 has a two blade system and is forward and down. The knife systems can be used simultaneously. Holes on the base plate to the fasten the machine on a table or work bench. Cutting speed 25 m / min
Sollas SB250 stretchbander for cartons with 1000mm x 150mm (L x W) exit conveyor, output up to 25 packs per minute. Carton size range min. 60 x 35 x 10 mm (LxWxH), max. 400 x 450 x 200 mm Foil width 100 to 250mm Foil roll diameter max. 280mm Compressed air 4-6 bar
3 feeders 1 folding station adressing unit Sitma 950 foil wrapping machine infeed to the stacker with reject unit stacker belt delivery ; working condition
MAR VM8-DT closing machine for rubber bungs, 8 head, with automatic bung feeder with vibrating bowl, suitable for containers 10 to 80mm diameter and from 30 to 180mm high. Includes format parts for 20mm bungs. Output up to 400 per minute. Machine dimensions approx 2000 x 900mm, height approx 1700mm. Weight approx. 960kg. Electrics 220/380V 50Hz.
Size max 355 x 250 mm min 115 x 100 mm Speed max 4200 c/h Number of stitches Standard 7 Dimension 1500 x 1400 mm ; working condition
TRUMPF TruPunch 3000-1300 (S11) punching machine was built in Germany in 2013. The reliable machine with extensive equipment and modern components offers its user unparalleled precision and accuracy in machining both thick and thin sheet metal. In addition to standard punching and marking, the punching machine also allows fast grooving, surface embossing, forming and chipless threading in stainless steel, structural steel and aluminium. On the machine’s sturdy and welded C” shaped structure, sits a specially designed brush table with integrated balls, designed to facilitate the loading and unloading of workpieces. The use of this type of table prevents scratches and nicks from appearing on the surface of the sheet, which results in a significant increase in the quality of the machining. During the entire production process, the sheet is held rigidly by hydraulic clamps fixed to th ...
Built 1997 Mechanical power 24,000 c/h Format main product max 96-120 pages min 4-8 pages format supplement max 96-120 pages Equipment o opening station with suction cup and sword o 2 main product feeder o 8 insert feeder o 7 bar feeder AF-200 o delivery coupled with o crosser CN-25; ready for operation
Standard equipment: Drive: V-belt and gear unit combination Automatically elektomagnetischer spindle feed machined base plate with T-slots and coolant system integrated precise mechanical drilling depth setting automatic tool ejector Lighting Motor protection switch with tripping for U Emergency off pushbutton Drill protection with Electr. Hedging Rotary and swivel table Thread cutting device Gear lubrication through automatic oil pump Push button feed at the handle Stepless speed adjustment, frequency-controlled potentiometer and 3-way manual transmission for stage change Technical data: Drilling capacity 50 mm Thread cutting capacity (depending on elevation) M42 Spindle MK IV Depth 200 mm Throat depth 360 mm Column diameter 175 mm Usable surface (pivoting) 550 x 550 mm T - slot size number 3, distance 160 mm Dimension width 16/28 Digital speed display Dri ...
Built 1997 format max 520 x 840 mm min 100 x 150 mm Folding capacity max 180 m/min Equipment: o Flat pile feeder o Zaehlgeraet 1. Folding unit: o 4 folding bags 2nd folding unit: o 4 folding bags
Complete system with all accessories required for installation and operation, see below! Travels x = 7000 y = 1600 z = 800 / quill stroke w = 600mm General overhaul in 2007, year of production 1991: New control system Siemens Sinumerik 840D, new drive motors, guideways refurbished, new control cabinets. ECOCUT 1 was only operated for a few months thereafter Feed rate 12000 mm / min // w axis 6000 mm / min Xua2eg8fx Rotary table TDV 2 max. Workpiece weight 6t / clamping surface 1000x1000 Rotary table TDV 3 max. Workpiece weight 12t / clamping surface 1250x1600 Accessories: 2 like new angular crankset / chain tool change system / plate field / complete housing / Knoll funnel feeder / extraction / coolant system with belt filter All BWF fixators for installation of machine bed and panel
with (wide) swivelling vertical head table size 300 x 1,430 mm table paths: laengs (X-axis) 1,000 mm persive (Z-axis) 520 mm quer (Y-axis) 360 mm installation height under fraes spindle approx. 500 mm Extension of the fraesspindle min./max. 350 mm spindle holder SK 40 spindle speeds 25 - 1,200 rpm feed/rapid speed 12-900 mm/min spindle drive approx. 3 kW Total drive 3.4 kW - 380 V - 50 Hz weight 2,400 as kg;
ECKERT AGAT SPEED gas cutting machine was manufactured in Poland in 2014. The machine designed for precision cutting of metal sheets with a maximum thickness of 100 mm is distinguished by a high-quality portal with an open structure, ensuring excellent stability during the performed cutting process and free access of the operator to the working space. The contamination generated during the cutting process is continuously removed by a sectional extraction table covering the entire working area of the machine. The ECKERT gas cutting machine is also equipped with, among others, a state-of-the-art CNC ECS 872 controller and an oxygen torch support with capacitive distance sensor. Technical data of the ECKERT AGAT SPEED CNC cutting machine - CNC control: ECS 872 - maximum workpiece thickness: 100 mm - work table surface (L x W): 3000 x 2000 mm - oxygen torch support with capacitive dis ...
maximum number of results exceeded
please refine your search
