cooking kettles and used for sale

NNP cooking kettles Stainless, cooking and mixing system on skid, two 350L mixing tanks, with Alfa Laval GM1 centrifugal pump and Randolph 600 series peristaltic pump, jacketed tanks, adjustable temperature and variable speed pumps, 3Ph

Giusti, cooking vessel, steam jacketed vessel, 225L, central bottom discharge, stainless lid

Capacity: 600 l Heating: steam, 127 kW, 8 bar Outside dimensions 110 x 130 x 135 cm (HxWxD) Inside dimensions 60 x 109 x 88 cm (HxWxD) Control: MC K Mouting Voltage: 230/400 V , 50 Hz Cover: insulated,with springs and hinges of stainless steel, opening 90° Drainage: piston – type drain cock Equipment: valves for cold and hot water

Capacity: 400 l Heating: gas , 36 kW Outside dimensions 94 x 130 x 122 cm (HxWxD) Inside dimensions 48x110x80 cm (HxWxD) Mouting Voltage: 230/400 V , 50 Hz Cover: insulated,with springs and hinges of stainless steel, opening 90° Drainage: piston – type drain cock Equipment: valves for cold and hot water

General SKU271W404 MakeConthermo TypeSBE 50 LocationBarneveld CEcheck Main Features MaterialStainless steel Volume50 Ltr. Motor3 KW Specified Features - Cooking pan Stirring-cooking vesselcheck Capacity50 l Vessel sizesDia. 700x530 mm Flat bottomcheck OutletDN50 With covercheck Electric heating2,7 kW, 400 volt With propellor stirrercheck With motor0,38 kW, 400 volt, 1420 rpm With variable speed drivecheck Speed mixing shaft1420 rpm MaterialStainless steel 1.4571 (316Ti) With jacketcheck General No.10190007 Year of construction2002 With switchgearcheck Floorspace1,0 x 1,0 m Total height1,30 m Weight210 kg Extra SpecificationsTemperature max 80°C, with temp controlCooking pansAgrochemicalsFeed additivesFood additivesAnimal feedOther feedConfectioneryConthermoStirring vessels > Cooking pansIndustries > Chemical > AgrochemicalsIndustries > Food & Feed > Feed  ...

General SKU290S402 MakeF. Widmann &: Sohn Apparatebau (D) Type160 Ltr. No.1346B-3 Year of construction1966 LocationBarneveld Pressure Working pressure jacket4 Bar Main Features MaterialStainless steel Volume160 Ltr. Specified Features - Cooking pan Cooking vesselcheck Capacity160 ltr. Vessel sizesdia. 680x600mm With jacket31 ltr. Without motorcheck Vessel can be tiltedcheck MaterialStainless steel 1.4541 (321) With jacketcheck General Floorspace1,4x1,1 M Total height1,0 M Weight150 KgCooking pansAgrochemicalsFeed additivesFood additivesAnimal feedOther feedConfectioneryF. Widmann & Sohn ApparatebauStirring vessels > Cooking pansIndustries > Chemical > AgrochemicalsIndustries > Food & Feed > Feed additivesIndustries > Food & Feed > Food additivesIndustries > Food & Feed > Animal feedIndustries > Food & Feed > Other feedIndustries > Food & Feed > ConfectioneryBrand ...

Maurer cooking chamber. Twin trolley., 6 trolleys available

Тype: FESSMANN AUTOVENT - 3 trolleys Base width: 151 сm Base depth: 347 сm Height corpus: 250 сm Min. room height: 293 сm Recommended room height: 293 сm Trolley dimentions (HxBxT), сm: 198х104х102

Тype: FESSMANN AUTOVENT - 1 trolley Cooking: steam low pressure 0,5 – 1,0 bar , by steam jets and high spraying rate in to the AUTOVENT Connected load for Low Pressure steam 0,5 Bar; 45 kW; 70 Kg/ h Control panel: MC 3.1 Base width: 151 сm Base depth: 127 сm Height corpus: 250 сm Min. room height: 293 сm Recommended room height: 293 сm Trolley dimentions (HxBxT), сm: 198х104х102

Type: FESSMANN T 3000 3 trolleys Heating: steam Control panel: DP 11 Base width: 151 cm Base depth: 347 cm Corpus height: 250 cm Min. room height: 304 cm Recommended room height: 320 cm Smoke-trolley dimensions (HxWxD), cm: 198x104x102 Connected load for HP heating: 111 kW Smoke generator: RZ 550 Machine width: 55,0 cm Machine length: 115,0 cm Machine height: 159,0cm Rated power: 1,8 kW

Type: FESSMANN T 3000 3 trolleys Heating: steam Control panel: DP 11 Base width: 151 cm Base depth: 347 cm Corpus height: 250 cm Min. room height: 304 cm Recommended room height: 320 cm Smoke-trolley dimensions (HxWxD), cm: 198x104x102 Connected load for HP heating: 111 kW Smoke generator: RZ 550 Machine width: 55,0 cm Machine length: 115,0 cm Machine height: 159,0cm Rated power: 1,8 kW

loading : 75 to 80 % double jacket suitable for cooling or heating up to 75°C with mixing arm all stainless steel tiltable drum outside dimensions (l x w x h) : ± 2.400 x 1.100 x 2.000 mm 3kW PLC control yoc 2017

Comprises of 300 litre and 500 litre vessels with independent control panels, a tote bin hoist and a transfer pump. Machinery in nice ex factory condition and being removed from the factory in Europe at the end of January 2025.

We sell a large batch of used Konica Minolta and OKI copiers and printers. All equipment comes from lease return or insolvency. The equipment was included in the maintenance contract during the lease. The devices are functional and on all devices there is a test printout with all meter information. Mixed lot: 3x Konica Minolta Bizhub C3100p, 12x Oki ES 4132, 3x Oki ES 5112, 2x Oki ES 7131, 3x Oki ES 4192MFP, 6x Oki ES 5462MFP, 4x Oki ES 5431, 7x Oki ES 8473MFP. We are happy to send meter readings and photos. The sale takes place from our warehouse in Dachau near Munich. Prices are EXW. Please understand that we only sell the entire lot or mixed packages of at least 10x pieces. Invoicing with VAT statement.

Plant: second-hand mobile Chamber filter press Type: Rittershaus & Baldwin AEHIS 1200 Year of construction: 1991 Filter plates sizes: 1200 x 1200 mm Number of plates: filter plates: PP Thickness: Expiration: closed Filter cloths: optionally available in voting on the medium Filter surface: approx. m ² Presses contents: approx. 3000 dm3 Filter pressure: 15 PSI Closing pressure: approx. 380-410 bar Plate transport: automatically Hydraulic power pack: Condition good Cylinder: no leaks, Rod blank-good condition Eccentric screw pump: as before priming pump Eccentric pump: EH2 type Bornemann 1900 Piston diaphragm pump: a pump Piston diaphragm pump: Type SP535N, Emmerich Wear parts: piston diaphragm pump replaced (proof of purchase. E installation: 2007 full service check (proof of purchase. Electrical connection: 125 amp input. Electrical connection: various outputs for external devices i ...

SANTANDREA DUAL SHAFT SHREDDER, Shafts length 1.500 mm, 77 mm.knives - 2 hooks, 1.500 x 960 mm shredding room, planetary gearbox, Electric motor 75 kW 400v 50hz, Hydraulic pack with 400 lt.tank, loading hopper with oleodynamic pressing unit, hydraulic pack, New electrical control panel, CE compliance, Users manual, electrical drawings, Sturdy carbon steel structure, Dimensions 3.400 x 2.000 mm, width: 1.500 mm. , Power: 75 kw

Heat and Power Plant with an Absorption Chiller An 850 kW combined heat and power plant with an absorption chiller. The systems ran perfectly until the end and all maintenance was carried out. No damage is known. The CHP ran for 51,429 hours of operation. The absorption chiller has run for 42,350 hours. The following components use an overhauled long block or completely overhauled. The components relevant to assemblies for modernization were marked: - complete panelling - Interfaceschronk - Oil relubrication pump Mechanically overhauled and electrically tested - Oil level monitoring - Plotter heat exchanger - Pressure expansion foll3 (if present) - Pressure transducer and temperature sensors - Rubber rails for motor and generator - Clutch element - Air filter inserts - Safety valves and arnot inserts - Sylomer strips - Hot water preheating pump and heating eleme ...

3x VERSATRONIC RV1s P&P machines which are slow (1200cmp/h) but full fully functional and with a lot of feeders. These machines were manufactured in a UK factory Versatronic. Machine were named Violer, Rosie and Blue. The last one is faster, little better software for fiducial camera for components. All machine are working and were used for prototype and low series like 50pcs electronic or 25pcs or 200pcs electronic. All P&P machines have two cameras, one for fiducial (up camera) and one (down camera) for components. Machines can place without problem components down to 0402 and fine pitch component like QFN or VFQFPN48… Speed for firs two is 1200cmp/h the last one is around 1500cmp/h. All machines have tool changer with 10 positions and one tool for camera auto calibration. Only 5 different tools were used but can be used up to 10 different tools. On one machine you can put u ...

Marel concept 500 labelling machine, - top and bottom labelling machine

GRANULATION AND SEPARATION PLANT, Capacity up to 600 kg/h (see below list), separation surface 750 x 375 mm, Vibratig ytable with a 0.750 kW drive, Blower - 0.750 kW drive, Total drive power 1,5 kW, Weight 380 kg, Processing capacity in kg/h approx. :, CU - Solid cable 500, CU - Stranded cable 250, AL - Cable 300, CU - Granulate 600, CU/AL - Radiator scrap 600, Electronic scrap 250, Various plastics 300, Tyre rubber 300, installed power - used power in work: about 60-65% : 1,5 kW, availability: 1 month approx, capacity: up to 600 kg/h, conditions: new equipment, SPECIAL FEATURES: spares usually available in stock - no downtime, CONSIDERATIONS: Ideal to start a profitable recycling business from scraps

DME Small Keg Washer - Second Hand CAPACITY: Fills up to 20 or cleans up to 14 kegs per hour (2 station) Fills up to 40 or cleans up to 28 kegs per hour (4 station) SPECIFICATIONS: Individual on / off valves allow filling of one to two or to four kegs (depending on head capacity) at the same time 3600 RPM s/s pump mounted on cart CO2 manifold with valved inlet / outlet and pressure gauge All stainless steel manifolds Portable stainless steel cart with locking casters Motor starter, on/off switch, 20 ft (5m) cord Keg cleaning support racks at 3'6" (1.070m) Counter pressure manifold with bleed off 1 ½” tri clamp connector for kegging tank outlet to filler hose This is a SECOND HAND item and is sold as seen For more information and more available stock please visit us at - advancedbrewing.co.uk

WACO - KUJAKON high speed planing and cutting line, Manufacture year 2003, Feed speed up to 200 m/min, Wood length 1800 - 6200 mm, WACO high speed planer Solid, - 6 spindles B-R-L-T-T-B, - incl. tooling, KUJAKON automation with de-stacking, infeed and stacking, - Outfeed with multiple cross cutting with 4 saws, - Signode pack strapping system

SANTANDREA DUAL SHAFT SHREDDER, Shafts length 1.000 mm, 40 mm.knives - 1 hook, 1.000 x 700 mm shredding room, planetary gearbox, Electric motor 30 kW 400v 50hz, Hydraulic pack with 125 lt.tank, loading hopper 1.700 x 1.400 mm., New electrical control panel, CE compliance, Users manual, electrical drawings, Sturdy carbon steel structure, Weight 2.900 kg ca, Dimensions 1.560 x 2.350 mm - hEIGHT 1.445 mm + supporting structure (max 1,500 mm), width: 1.000 mm. , Power: 30 kw

Description Item #8744 – CHOCOLATE HOLLOW GOODS DEPOSITOR AND SPINNING MACHINE Manufactured by Collmann Including Chocolate Depositing Machine including a 20-Head Spinning Machine to include the air condition unit with the modified cup unit in order to cool the chocolate while the moulds are spinning around. With several different Moulds including Egg, Easter Bunny, Chickens, etc.

Description Item # 8974 – GUM/ CANDY EXTRUDER and COOLING TUNNEL Last used for gum (to be made into chiclets) Including : CARUGIL STR-300D Extruder - Twin Head Extruder 8kW, 380Volts With Inclined Belt feeding into an EXECUTIVE Cooling Tunnel Type 1240301 400Volts, 50Hz With SIEMENS PLC Controls Including 2 x Freon R407C Compressors

Description Item # 8978 – CANDY CUT AND WRAP STICKPACK WRAPPER Manufactured by THEEGARTEN Model U1-Falt Cut & Wrap Machine Set up for piece size approx. 31 x 19 x 7.5mms Model F1 Stickpack Wrapper Set up for stickpack size approx. 97 x 31 x 8mms (5-piece)

Description Item # 8979 - GUM/ CANDY EXTRUDER & COOLING TUNNEL Manufactured by WLS Type KML Single Rope Feeding into a TOGUM Cooling Tunnel Model TOK 350-7-6 380Volts, 50Hz This was working with item #8680 candy cut and wrap

Description Item # 8980 – CANDY CUT AND WRAP MACHINE Manufactured by THEEGARTEN Model U1-Falt Set up for piece size approx. 31 x 19 x 7.5mms This was working with item #8679 extruder and cooling tunnel

Description 9214 - Likwifier jacketed with steam and holding tank Manufactured by WATSON METAL MASTERS INC (USA) Year 2012 A Likwifier is a type of mixer specifically designed to dissolve solids or semi-solids into a liquid, often used in the food industry for tasks like dissolving gums, emulsifiers, and other ingredients in ice cream mixes, sauces, and other food products

we sell two Frame 6B and C and new spare parts, as transition pieces, com ustion liners, blades and nozzles. Please ask for a quotation specificly. Thank you.

Complete laser and focus module for Avantra25 - all details can be seen on the picture. The unit is tested and comes from a functional Avantra25. Available on stock

<br>WORKING WIDTH: 3200 MM, MAX. CHARGE: 90 KN/M,<br><br><br>br>

Spare part for Tetra Pak TBA/3 filling machine: From the TBA/3 Jaw System, pre-assembled, complete: yoke left hand and yoke right hand with left hand arm, right hand arm Condition: unused/new Intermediate sale reserved

Used chamber filter press / filter press Rittershaus & Blecher / R & B 800 x 800 Plate size: 800 x 800 mm Chamber number: 100 pieces Filter pressure: 15 bar

Used chamber filter press / filter press Rittershaus & Blecher / R & B AEHIS /1200 x 1200 Plate size: 1200 x 1200 mm Useful length: 2500 mm Chamber number: 44 pieces Cake thickness: 30 mm Filter pressure: 16 bar Closing pressure: min. 380 bar / max. 440 bar Total filter area: 110.5 m2 Cake volume totalling: 1504 litres

Used membrane filter press / filter press Rittershaus & Blecher / R & B 1200 x 1200 (Mix) Plate size: 1200 x 1200 mm Membrane plates: 54 pieces Chamber plates: 55 pieces Membrane pressure: 15 mm Filter pressure: 10 bar Closing pressure: min. 350 bar, max. 380 bar Total filter area: 242 m2 Cake volume totalling: 4320 litres Number of filter presses: 2 pieces

Used chamber filter press / filter press Rittershaus & Blecher / R & B 1500 x 1500 Plate size: 1500x1500mm Cake thickness: 30 mm Useful length: 6065 mm Chamber number: 80 pieces Total filter area: approx. 320 m2 Filter cake volume: approx. 4 m3 Filter pressure: 15 bar Closing pressure: min. 300 bar / max. 400 bar Expiration: closed Plate material: PP

Downpour record Grey iron GGG50 1500 x 1500 chamber filter records Downpour records for chamber filter pressing 1500x1500 we can offer to you for almost all arrangements chamber filter records also in PP, filter cloths and spare parts almost all manufacturer.

Used membrane chamber filter press / filter press Rittershaus & Blecher / R & B 1200 x 1200 Plate size: 1200x1200mm Cake thickness: 40 mm Number of plates: 35 pieces Filter pressure: 8 bar Membrane pressure: 15 bar Expiration: closed Plate transport: automatic Filter cloths: optional Product-contacting stainless steel contactee ropes ! The facility is in very good condition.

Used chamber filter press / filter press Rittershaus & Blecher / R & B 1200 x 1200 Plate size: 1200x1200mm Cake thickness: 40 mm Useful length: 5300 mm Number of plates: 40 pieces expandable to 51 Filter pressure: 8 bar Expiration: closed Plate transport: automatic Filter cloths: optional

Used chamber filter press / filter press Rittershaus & Blecher / R & B 800x800 Plate size: 800 x 800 mm Useful length: 3500 mm Chamber number: 64 pieces Cake thickness: 30 mm Filter pressure: 15 bar Closing pressure: min. 380 bar / max. 440 bar

Used chamber filter press / filter press Rittershaus & Blecher / R & B 1500 x 1500 Plate size: 1500x1500mm Cake thickness: 30 mm Chamber number: 128 units Filter pressure: 15 bar Closing pressure: min. 300 bar / max. 400 bar Expiration: closed Plate material: PP

Attachment: Chamber filter press used Type: Rittershaus & Baldwin AEHIS 1200 Design: bridges Holm Filter plates sizes: 1200 x 1200 mm Plate number: 35 Filter plates: PP Thickness: 30 mm Schedule: closed Filter cloths: optionally available in voting on the medium Filter surface: approx. 85 m ² Presses contents: approx. 1200 dm3 Filter pressure: 15 PSI Closing pressure: approx. 380-410 bar Plate transport: automatically Pump technology: optional Dimensions: L 5800 x B 1900 (2550) x H 2500 (2900) mm Accessories: filter cloth car wash, optional light barrier Extra services: On this complex warranty months 6-12. Condition: The unit is ready for use immediately. Buy or rent: Visits of facilities in consultation with us in the work.

Complete Laser Modul for Avantra25 - see all details in the picture. The Unit is out of a well working Avantra25. Available: on stock

WORKING WIDTH: 3200 MM, MAX. LOAD: 90 KN/M,

used, kpl. 1 year warranty, plate size 800 x 800 mm, 55 plates, open outlet, 25 mm cake thickness, pressure 15 bar, capacity approx. 710 liters, filter area 58m2, dimensions 6000 x 1400 x 1800 mm, weight 6500 kg, motor hydraulics, automatic. Plate transport, drip plate, filtrate channel, with or without filter cloths

<b>Features:</b> Used pallet roller conveyor from Pack & Roll GmbH Fuesse to order separately Geraeuscharm Condition: fully functional with traces of use Ideal for fast material transport Professionally dismantled and packaged Color: Silver Drive: Gravity Total 14.58m plug available <b>Technical data: </b> Dimensions of the roller conveyor Total quantity in stock: approx.: 14.580mm Length per segment: 3645mm Total width: 1150mm One brake roller is available per segment Diameter of brake roller: 90mm <b>Details of the role</b> Clamping length: 1055mm Diameter approx.: 60mm Axis distance: 130mm, adjustable Material: steel, galvanized <b>Information on the framework</b> Height: 80mm Width: 40mm <b>Pallet roller conveyor</b> The roller conveyor is ideal in the picking zone for int ...

1 of used swing-top bottling line. Originally used for filling beer (2°C) in 330 ml printed/sleeved glass bottles (D 60 mm x H 230 mm) with swing-top closures, at a speed of ± 1.900 bph. Additional size-parts included for 500, 750 und 1.000 ml bottles. Last used for bottling liquors. Wired for 415V/50Hz. Line hardly used and hence in excellent condition! Line consists of:Bottle feed table with 5 rows of stainless steel slat, stainless frame, with inliner and variable speed drive, new 2006. 1 lot interconnecting empty- and full bottle conveyors, stainless steel slat and frame, new 2006. 1 rinser/filler monobloc, make Cime Careddu (Italy), type DPS 9-8, new 2006, 9-head rotary rinser, no-bottle/no-spray, 8-head rotary counter-pressure filler with double pre-vac (built-in vacuum pump), height adjustable min/max 180 – 350 mm, diameter min/max 50 – 90 mm, CIP to drain, with Telemecaniq ...

2 pieces Rheinhütte - pumps