conical tanks used for sale

VA stainless steel mixing tank mixing tank with 2 storage tanks and diaphragm pumps of new condition Manufacturer: Mischmischmischtechnik Hoffmann & Partner Type: ERA 300 Y.O.M.: 2008 / No. 6151 Stirrer tank approx. 700 mm Stirring tank capacity 300 litres Stirring drive/gear motor - North SK 100L/4 TF; 220/380 V; 9.0/5.2 A; 50 Hz; IP55 - 2.20 kW; 1440/321 rpm Outlet at the bottom with pneumatic control valve System with 2x diaphragm pump "verder CX 20 ETZ". with 2x storage tank volume 220 liters each (approx. 550 mm x 1000/1400 mm) Stirring tank with filling hopper with collecting tray (all components are attached to the tub) see more pictures Total approx. 1800 x 1300 H 2300 mm The plant was previously used to mix glycerine.

OERLIKON / ALPHATOME II T30 HP300 PPM 400 OERLIKON - Typ: ALPHATOME II T30 HP300 PPM 400 - Baujahr: à 2013. Special features of the ALPHATOME II series / EQUIPMENT: Camera system: Moving camera on the cross-drive carriage for easy positioning and cutting monitoring by the operator from the control panel. The graphic is done by a permanently visible button on the touch screen interface. Protective devices: 7 Facilities for the protection of operating personnel. Photocells in the front and back of the bridge. Emergency stop button on all corners, as well as on the external control panel. Anti-glare-/splash protection: The anti-glare panel of the bridge is raised or lowered automatically or by pressing a button. On the sides, the panel can be opened manually for the burner and wear parts. Furthermore, the noise development is significantly reduced and resulting smoke is bet ...

Mechanical sheet metal shears of excellent quality, for the burr-free precision cutting of sheet metal up to 1.2 mm sheet thickness steel sheet/ST40 – aluminium 1.5 mm, backdrop-guided knife beam Largest cutting length 4,080 mm, cutting angle 1.5° - up to 25 cutting strokes/min, NC - controlled rear stop with 750 mm travel range, slantable for conical cuttings - automatic removal of the stop rail at sections deeper than 750 mm - with forced-controlled sheet lifting device - automatic tipping device for the sheet metal cuttings into the section collection cart, Scissor table height 800 mm - scissor table width 300 mm - Scissor table extension up to 480 mm support width, dimensions 4.75 m x 1.68 m x H 1.46 m, drive power 2.2 kW, weight approx. 1,500 kg

Wing Mixer Wing Wheel Low Speed Mixer Propeller Agitator Propeller Mixer Xylems Flygt Banana SR Agitator used Low speed, highest efficiency Slow-running Flygt agitators are used when large amounts of liquid need to be stirred effectively and optimally during the treatment process. The result is outstanding efficiency. Manufacturer: FLYGT Type: M18-11-4AL / Banana SR agitator Propeller diameter approx. 1800 mm Wing/propeller length approx. 850 mm Wing/propeller width approx. 420 mm Diving motor Flygt 4430.010 690/400 V; 4.8/8.3 A; 50 Hz; IP68 4.0 kW; 1405 rpm Slow running submersible motor agitators Application: - Activated sludge treatment, conventional treatment, oxidation trench - Water reservoirs - Ice-free keeping - Oxygenation in lakes and ports - Biogas production tanks - Wastewater agitator Total approx. 1800 x 1300 x 600 mm Weight approx. 290  ...

Storage Tank/ Pressure Tank/Beer tank 2400 liters in AISI 304 with cooling jacket Test pressure: 1,5 bar, Operating pressure: 0,99 bar - NEW Material: V2A – AISI 304 (1.4301) Operating pressere: 0,99 bar Surface inside IIIC Operating temperature in °C: 130 Upper body: Manhole lid round DN 400 with 6 screws With 1 Thread connection DN 50 and with handle bar With CO2-connection (extra charge) With overpressure valve (extra charge) Tank cylinder: With cooling jacket With connections for cooling jacket on the back inlet 1” AG, outlet 1¼”AG With connection for sample valve DN 15 ( sample valve - extra charge) With connection for temperature indicator 3/8 (temperature indicator - extra charge) Lower bottom: Rest outlet with butterfly valve DN 50 with conical bottom On 4 stable feet Easily movable with a m ...

Diesel filling station - service station - Hoftankstelle - Tankstelle 5,000 litres of content - new to the factory - according to DIN 6616/D, above ground, double-walled, incl. test certificate. The container has two saddle feet, a manhole with dome lid and is equipped with the following fittings: 1 filling tube with TW-cap (filling cap) and immersion pipe, 1 bearing pipe with bearing rod and bearing rod closure, 1 vent pipe with vent hood, 1 brand-new limit sensor with type-approval (AIII), 1 conductor and 1 spare sleeve for extraction purposes, 1 optical leak detector with type approval and leakage liquid. The container is primed on the outside - on untreated sheets. L = approx. 2.80 m - D = 1.60 m - weight approx. 1.5 to. - ex works, freely charged - We recommend: Above containers sandblasting from the outside, prime and completely repaint - dark grey  ...

A 2-stage APV water degassing system, Type VII S Type plate Info: Machines No.: 10159 Capacity: 30,000 l per hour Built in 1991 Contents of the lying degassing tanks approx. 2 x 250 l Water precoth 3 bar or slightly higher Residual -0.2 less than 0.1 ppm for a water temperature of 12°C with 1 APV centrifugal pump with 15 KW with 1 vacuum pump, manufacturer Travini Italy, 11 KW with CO2 dosing via needle valve with level control of the entry and exit Water 1 control cabinet on 2 feet standing with Siemens switchgear equipment Dimensions of the system: 2,900 x 1600 x 3200 mm Weight of the plant 950 kg A 2-stage APV water degassing system, Type VII S Type plate Info: Machines No.: 10159 Capacity: 30,000 l per hour Built in 1991 Contents of the lying degassing tanks approx. 2 x 250 l Water pre-pressure 3 bar or slightly higher residue -0.2 less than 0. ...

40m3 storage tank for AHL/ASL - steel tank used storage container 40,000 litres capacity for storage of liquid fertilizer / AHL / ASL with brand-new plastic inner shell The container corresponds to DIN 6616, has 2 saddle feet, an ascent ladder and is professionally emptied and cleaned inside. D = 2.50 m - L = approx. 8.70 m. The container receives a brand new plastic inner shell - resistant to the storage of liquid fertilizers - incl. leak warning device mounted in the protective box - see sample photo. The inner plastic sleeve has a "General Building Supervision Approval" and is therefore used for the storage of liquid fertilizer AHL nox reducing agent AUS 32 (AdBlue). The container is completely ground on the outside, re-primed and repainted in desired colour according to RAL. The price is ex works - freely charged. Delivery time = by arrangement.  ...

Liquid fertilizer / AHL / ASL - Tank tank storage tank storage tank a used storage tank 100,000 litres for storage of liquid fertilizer / AHL / ASL with a brand-new plastic inner shell. The container corresponds to DIN 6616, has 2 saddle feet, is professionally emptied and cleaned inside, incl. ladder. The container receives a brand new plastic inner shell - resistant to the storage of liquid fertilizers - incl. leak warning device mounted in the protective box - see sample photo. ASL (ammonium sulfate solution) is a sought-after liquid fertilizer used in drying plants during the drying of liquid fermentation residues and during exhaust air purification. Due to the corrosive properties of the bearing medium, ASL containers require an inner plastic shell. The inner plastic sleeve has a "General Building Supervision Approval" and is therefore AHL for the storage of ...

Sell 5 pcs functioning MT Marathon CD/DVD/Bluray Inkjet Printer. Printing costs as low as 0.02 Euro per disc, between 6 and 12 times cheaper than competing inkjet printers. Equipped with four 120ml ink tanks, the Marathon Printer is capable of printing on over 2,500 discs (full-size). Based on the IMT RCD/ DVD Printer 2, the Marathon Printer integrates proven robotics technology and holds 260 discs. The Epson print engine is designed around a standard motor, ensuring flawless detail (up to 5760 dpi). The Marathon printer is an environmentally friendly printer as the refill reservoir system eliminates the need to purchase replacement ink cartridges. In addition, the system allows you to visually check the ink level.

Batch mixture, approx. 100 t/h, mixed material silo TELTOMAT with bucket lift, 4 main chambers + additional chamber (total capacity: 160 t), sieve and dry drum, 2-shaft forced mixer, 30,000 L heating oil tank, AMECO filter system, 3 bitumen tanks, 2 silos with screw conveyor

Powder coating plant for large parts "Kigo O.E." Example: (all large foods can be changeable individually) Space requirement: 30 x 15 meters Part size: L= 6.200mm B= 2.300mm H= 2,000mm Cleaning cabin walkable incl. sprueh wreath automatically 1 dimensions of the cabin Load length 9,000 mm Width 4,500 mm Height 3,400 mm 2 dimensions of tanks Load length 1,200 mm Width 850 mm Maximum 1,000 mm 2 dimensions of the cabin Completely Load 9.140 mm including tanks width 5,580 mm Height 4,200 mm Coating cabin walkable, manual coating 1 Dimensions Cabin Length 9,000 mm Width 4,500 mm Height 3,400 mm 2 Dimensions cabin including suction Load length 10.125 mm Width 4,500 mm Height 3,400 mm Powder incineration furnace 1 inner dimension length 6,500 mm 2 Inner dimensions width 2,500 mm 3 Inner height height 2,950 mm 4 Outer dimensions incl. therm ...

Mechanical manual sheet metal shears of excellent quality, for the burr-free precision cutting of fine sheets up to 1 mm sheet thickness steel sheet/ST40 – aluminium 1.2 mm, backdrop-guided knife beam, maximum cutting length 3,080 mm, cutting angle 1.5°, manually operated rear stop with 750 mm travel range - +/- 5 mm slantable for conical cutting, optional with sheet metal high-holding device and automatic tipping device for the sheet metal cuttings in the section collection trolley, scissor table height 800 mm - scissor table width 300 mm - scissor table support width up to 480 mm, dimensions 3.55 m x 1.6 m x H 1.3 m, weight approx. 790 kg

The Brogli plant is designed to produce homogeneous products for the chemical, pharmaceutical, cosmetics or the food industry from powdered and liquid raw products using heat, pressure and mechanical stirring energy. Usable volume 200 litres. Plant incl. 3 feed tanks, vacuum pump, spare parts, etc.

CONICAL ROUNDER, Sind GT Dimensions: 950x950x1520mm Electrical power: 1.1kW

Biological exhaust air purifier for odour removal, exhaust air treatment, bio-air purifiers, biofilters, air scrubbers used The exhaust air filter can be used for odour disposal in wastewater treatment, waste management, oil mills and malthouses, biogas plants, landfill degassing, carcass recycling plants and slaughterhouses. The exhaust air is first passed through an air scrubber / humidifier and then through the biofilter material. There, the unened odours are neutralized. Manufacturer S&H GmbH & Co. Umweltengineering KG Year of construction probably 2006 Dimensions: approx. 10.5 m x 10.5 m + 2.5 x 5 m Surface filter 9 x 9 m (internal dimension) Filter material: 149 m3 biomix and 24 m3 oak wood Bulk height 2.14 m The side walls are made of PE panels with support made of galvanized steel. The filter was installed in a biogas plant. We also have other components of the s ...

power of 1.1 kW / 2,9A / 380V / 50Hz; the weight of a piece of 500 - 1200 g; productivity up to 1200 pcs / h; weight approx 280kg.

screen printing machine: Manufacturer: Borghoff & Wilk GmbH Model: DupIomatic-R Year: 1987 screen printing machine for curve printing electro-pneumatic Planetary gear with 3-take-up positions, squeegee device pneumatic squeegee head with vertical lift and fine adjustment conversion kit for conical objects (approx. 7.5 °) Rack and pinion drive possible Equipment: 3 flood squeegees (100mm, 150mm, 190mm) 6 squeegee holders (2 x 100mm, 2 x 150mm, 2 x 200mm) rack 800mm length, various gears and drive wheels Location: germany Price: on request

Parts of a fermentation cellar are offered: Open fermentation vat 25 hl 2 pieces Fermentation vat 25 hl net 32 hl gross round version, with cooling stand on standard feet Dimensions D inside = 1700 mm Hmax= 2000 mm Conical bottom 30° cooling 1 cooling zone on the sheath 3.0 m2 each, Pmax.= 3bar G1 Equipment Analog Temperature Display Sampling valve inlet/outlet DN32 with disc valve Second outlet DN32 with disc valve Height from the bottom H=150mm 2x open fermentation vats each 50 hl with cooling standing on standard feet Dimensions D = 2370 mm H = 3000 mm 2x ZKG fermentation tanks 25 hl containers for fermentation; Stainless steel V2A Standing; insulated, equipped with heat exchanger; 3,200 l

Used Molteni two-tank dissolver. The mixer has two tanks with capacity. 2,500 liters each. While mixing in the first tank, the second tank is emptied. Next the agitator from first tank is hydraulically lifted and transfferd to second tank. During mixing tank is rotated counter to the rotation of the dispersing disc. Hydraulic drive of the agitator. EX. Tank has a manual product scraper from the sides.

A HOSOKAWA ALPINE Originals machine Refurbished by the original manufacturer Use of original components only Original manufacturer warranty Guaranteed manufacturer spare parts supply Short lead time Before delivery, the machine is overhauled, all wear parts are revised and exchanged if needed and customized to your specific needs Possibility to provide all additionally required peripherals or adapt to existing production plant With the Bexmill A BM soft to medium-hard substances are crushed gently. The Bexmill is also called basket type mill or conical mill. The mill can be charged both, continuously and discontinuously. From the feed unit the material to be crushed reaches the grinding area. Due to its conical form the Bexmill A BM can be operated in contrast to the classic Flake Crusher at higher revolutions. Through this larger throughputs and higher fineness can be achieved ...

A HOSOKAWA ALPINE Originals machine Refurbished by the original manufacturer Use of original components only Original manufacturer warranty Guaranteed manufacturer spare parts supply Short lead time Before delivery, the machine is overhauled, all wear parts are revised and exchanged if needed and customized to your specific needs Possibility to provide all additionally required peripherals or adapt to existing production plant The Bexmill A BM is a basket type mill or conical mill that can process soft to medium-hard substances. The gentle communition ensures the required particle size is obtained in one pass avoiding product damage and generating a minimum amount of fines. It can be operated both continuously and batchwise. A variety of screens are available in different shapes and opening sizes, they can be quickly exchanged without the use of tools to adapt to the desired task ...

A HOSOKAWA ALPINE Originals machine Refurbished by the original manufacturer Use of original components only Original manufacturer warranty Guaranteed manufacturer spare parts supply Short lead time Before delivery, the machine is overhauled, all wear parts are revised and exchanged if needed and customized to your specific needs Possibility to provide all additionally required peripherals or adapt to existing production plant Refurbished Pharmapaktor APC L200/50. The machine was previously used as a demo and rental unit. Compacting head Two cast stainless steel H-frames connected by spacer bolts. Two laterally foldable swing arms for easy and quick changing of the rollers. The swing arms are fixed with two tie rods, which also absorb the compressive forces of the compacting rollers. One chamber insert for guiding the product flow and two center pieces for sealing the roll ...

C 5020 V CARB Toroidal roller bearings SKF Explorer CARB toroid roller bearings Storage data Tolerances Normal, P5, conical bore 1:12, conical bore 1:30, Radial storage air, cylindrical bore, conical bore Single copy price 60 Euro

T9 - used approx. 20 m³ / 20,000 ltr steel tank with coated inside, standing upright. technical details: capacity: approx. 20 m³ / 20,000 litres material: steel tank with inner coating dimensions: Ø approx. 2.55 m × total height approx. 5.70 m Used steel tank with inner coating, professionally cleaned and in good condition. Standing, above-ground storage tank on 4 steel feet, lid on top of the roof and down at the tank bottom, several inlets and outlets. Steel rack and matching ladder available at an additional cost. The container can be used as a storage tank for water, liquid feed, whey, potato steam skins, molasses, liquid manure, seeping juice, rapeseed oil, or as a rainwater tank, etc.. Price upon request. Transport can be arranged at low cost. Also we can modify the tank to suit your demands, just ask us. It is not possible to update all our advertise ...

A HOSOKAWA ALPINE Originals machine Refurbished by the original manufacturer Use of original components only Original manufacturer warranty Guaranteed manufacturer spare parts supply Short lead time Before delivery, the machine is overhauled, all wear parts are revised and exchanged if needed and customized to your specific needs Possibility to provide all additionally required peripherals or adapt to existing production plant New mill never used, in former design. ACM 40 EC Features and advantages of the ACM classifier mill: • Grinding and classifying in one machine. • Excellent precision of cut, steep particle size distributions. • Steplessly adjustable cut point. • Flow-optimised conical classifying wheel guarantees fines with no oversize particles and low wear in comparison to cylindrical classifying wheels. • Cool and gentle grinding thanks to high air fl ...

A HOSOKAWA ALPINE Originals machine Refurbished by the original manufacturer Use of original components only Original manufacturer warranty Guaranteed manufacturer spare parts supply Short lead time Before delivery, the machine is overhauled, all wear parts are revised and exchanged if needed and customized to your specific needs Possibility to provide all additionally required peripherals or adapt to existing production plant Used Hosokawa Alpine ACM 30 classifier mill, in normal steel, NPSR, non ATEX. Consisting of complete mill with motors Features and advantages of the ACM classifier mill: • Grinding and classifying in one machine. • Excellent precision of cut, steep particle size distributions. • Steplessly adjustable cut point. • Flow-optimised conical classifying wheel guarantees fines with no oversize particles and low wear in comparison to cylindric ...

The syrup room is designed to mix sugar with water to a given concentration of the resulting Brix of syrup, heat treatment of the syrup, in order to increase biological resistance. Capacity: until 10 t/h Operating mode: automatic Registration of mixing, pasteurization process parameters Automatic control of temperature, flow, pressure Touch control panels Memory configuration The choice of settings for different operating modes Syrup room consists of: sugar loading into the system unit mixing tank I hot water preparation unit for syrup with distribution panel I filtration unit buffer tank pasteurizer blending tanks with pumping station distribution panel II tank for mixing components cabinet for system control with touch control panel

USED NX418 DECANTER REF.: C2858 NX 418 RECONDITIONED DECANTER. Carbon steel platform, with 4-leg fixings for ground anchoring. Carbon steel frame, fixed by silemtblock to the platform. Side engine support with belt tension plate. Anchorage of main bearings. Stainless steel bowl in conical trunk shape, in three removable pieces. screw solid discharge built in stainless steel troco-conical shape with contribution of crest tostene and wing advance. Stainless steel top enclosure with three rear hinges for easy opening, screw closure. Feeding tube built in stainless steel Cam type cycle reducer. Main engine at a speed. Power from 18Kw to 3000 Rpm 400V / 50 Hz Properly oversized bearings installed according to manufacturer's standard. Rolling unit driven by 6 V-belts. Save integral protection straps. General characteristics: Model NX418 Weight 1600 kg

Very high-quality CNC – controlled precision sheet metal bending machine with automatic bending sequence calculation - automatic CNC – controlled double-sided pre-bending - Conical bending device - three hydraulically driven rollers (one hydraulic motor per roller) - hydraulic linear under-roll adjustment - hard chrome-plated piston rods - hardened and ground rollers - PILZ® laser protection - BECKHOFF® CNC control with Ethernet technology and large touch screen - DANFOSS® precision hydraulics - Central lubrication system

Key data: 188 , 3100 , 4

Sheet thickness: 188,00 mm Bending length: 3100 mm Number of rolls: 4   Without side support Conical bending attachment Oil cooler Separate hydraulic power unit Central lubrication Rolling width:                 3.000mm Rolling thickness 3x toproll Ø:34mm Rolling thickness 5x toproll Ø:38mm Rolling thickness prebending:  32mm Top Roll Ø:                    460mm Bottom Roll Ø:                 440mm Side roll Ø:                   330mm Number of rolls:               380 Rolling speed:                 2 + 4 m/min Adjustiment lower roll:        0 - 200 mm/min. Adjustm ...

Very high-quality CNC – controlled precision sheet metal bending machine with automatic bending sequence calculation – automatic CNC – controlled double-sided pre-bending – conical bending device, three hydraulically driven rollers (one hydraulic motor per roll), hydraulic linear sub-roll adjustment – hard chrome-plated piston rods – hardened and ground rollers - PILZ® laser protection - BECKHOFF® CNC – control with Ethernet technology and large touch screen - DANFOSS® precision hydraulics – central lubrication system Maximum bending length 2,000 mm Roll diameter 170 mm Smallest weft diameter = 1.1 x the roll diameter The rollers run in bronze plain bearings. Nominal pre-bending performance over the entire bending length at 5 x D = 5 mm for sheet steel/ST40 Nominal bending performance over the entire bending length at 5 x D = 7 mm sheet steel/ST40 Drive power  ...

Very high-quality CNC – controlled precision sheet metal round bending machine with automatic bending sequence calculation – automatic CNC – controlled double-sided pre-bending – conical bending device, three hydraulically driven rollers (one hydraulic motor per roll), hydraulic linear sub-roll adjustment – hard chrome-plated piston rods – hardened and ground rollers - PILZ® laser protection - BECKHOFF® CNC – control with Ethernet technology and large touch screen - DANFOSS® precision hydraulics – central lubrication system Maximum bending length 2,000 mm Roll diameter 170 mm Smallest weft diameter = 1.1 x the roll diameter The rollers run in bronze plain bearings. Nominal pre-bending performance over the entire bending length at 5 x D = 5 mm for sheet steel/ST40 Nominal bending performance over the entire bending length at 5 x D = 7 mm sheet steel/ST40 Drive  ...

Tank,stanless acid proof steel,tank cover in the top,conical bottom,Ø 2500 mm.

Tank,stainless steel,tank cover in the side,conical bottom,Ø 2500 mm.

Tank,stainless acid proof steel,tank cover in the side,conical bottom,Ø 2500 mm.

Silo,aluminum,man way in the top,conical bottom,L 1330 x W 1130 x H 1850 mm.

Workpiece diameter: 4300 mm Distance between centers: 0 mm Number of rolls: 0   Field off application of the machine; Tank ends, silo tunnels, fume hoods, rocket and prime mover components, large containers and flanged & profiled parts for tanks, vessels for the chemical and the aircraft industry Max. workpiece:           4000Ø Maximum sheet thickness:  13mm Max. dishing radius:      100mm Min. product Ø:           800Ø Min. plate thickness:     2mm Max height on dishing side:40mm Power:                    20kW Length:                   5.000 mm  Width:                    1.000 mm  Height:      &n ...

100 m³ / 100,000 l extinguishing water tank according to DIN 14230 Tank volume: 100,000 liters / 100 m³ Length: approx. 15,750 mm Diameter: approx. 2,900 mm Weight approx. 16,300 kg Material: Steel material S 235 JRG 2 Underground tank for underground storage according to DIN 6608, single or double-walled, suitable for the walkable and passable area (load class SLW 30) with 1 dome (manhole) DN 600 with blind lid, seal and screws. New or used immediately available! The container is emptied, cleaned, overhauled and tested for leaks by us as a specialist company. The container complies with the regulations of DIN 14230 (Underground extinguishing water tank): - Extinguishing water suction connection according to DIN 14244 with a mounted Fire brigade coupling / fixed coupling A according to DIN 14319 in the Form B version without bearing nozzle - Vent flange nozzle in  ...

x-travel: 400 mm y-travel: 250 mm workpiece height: 485 mm Control: ELESTA CNC 314 total power requirement: 10 kW weight of the machine ca.: 4000 kg dimensions of the machine ca.: m H A U S E R CNC - Controlled Vertical Precision Coordinate Grinding Machine Model S 3 – CNC 314 Year 1987 / 1998 partially reconditioned by Swiss-HTT # 0463 ____________________________________________________________ Table size, approx. 600 x 380 mm Max. load on table, approx. 300 kg Table travel, longitudinal, max. (X Axis) 400 mm Table travel, cross, max. (Y Axis) 250 mm Vertical adjustment of grinding head max. (W Axis) 450 mm Stroke of grinding spindle, max. (Z Axis) 120 mm Table Longitudinal and cross feeds (X/Y-Axis) 0 – 1.500 mm/min Speed of grinding head stroke 15 – 7.500 mm/mi ...

Sold is a WP CCR 59 / Kemper M2 conical rounder incl. discharge belt and lubrication. Used and refurbished.

90 m³ / 90,000 l extinguishing water tank according to DIN 14230 Tank volume: 90,000 liters / 90 m³ Length: approx. 13,500 mm Diameter: approx. 3,000 mm Weight approx. 11,000 kg Material: Steel material S 235 JRG 2 Underground tank for underground storage in accordance with DIN 6608, single or double-walled, suitable for walkable and passable areas (load class SLW 30) with 1 dome (manhole) DN 600 with blind lid, seal and screws. New or used immediately available! The container is emptied, cleaned, overhauled and tested for leaks by us as a specialist company. The container complies with the regulations of DIN 14230 (Underground extinguishing water tank): - Extinguishing water suction connection according to DIN 14244 with a mounted Fire brigade coupling / fixed coupling A according to DIN 14319 in the Form B version without bearing nozzle - Vent flange nozzle in N ...

80 m³ / 80,000 l extinguishing water tank according to DIN 14230 Tank volume: 80,000 liters / 80 m³ Length: approx. 12,780 mm Diameter: approx. 2,900 mm Weight approx. 13,250 kg Material: Steel material S 235 JRG 2 Underground tank for underground storage according to DIN 6608, single or double-walled, suitable for the walkable and passable area (load class SLW 30) with 1 dome (manhole) DN 600 with blind lid, seal and screws. New or used immediately available! The container is emptied, cleaned, overhauled and tested for leaks by us as a specialist company. The container complies with the regulations of DIN 14230 (Underground extinguishing water tank): - Extinguishing water suction connection according to DIN 14244 with a mounted Fire brigade coupling / fixed coupling A according to DIN 14319 in the Form B version without bearing nozzle - Vent flange nozzle in NWN  ...

: neu : 12 - 14 Wochen ab Auftrag : Deutschland : 4010 mm : 2 mm : 1.5 mm : 4 ELECTROCINEMATIC DRIVE OF THE BENDING JOINTS millmeter precise adjustment of the clamping beam BMS MULTI-Touchcontrol electric powered rotary shear electronic depth stop flexible material supports inclined bending beam optimized geometry of the clamping beam safety equipment accoring to the control rules BG Germany 3 year warranty on stands and tension arms. Quality Made in Germany. FURTHER MODELS FROM3 UP TO12 M LENGTH AND FROM 1,25 MM UP TO 2,00 MM BENDING CAPACITY ON REQUEST. OPTIONS: Extended depth 1.250 mm price on request Conical depth stop to bend conical profiles and narrow/wide bendings for easy intermateing price on request clamping beam made out of hardox price on request Prices ex works Germany. Transport and commissioningat customers place on request. The data for this ad was created with Modul ...

: neu : 12 - 14 Wochen ab Auftrag : Italien : 4010 mm : 2 mm : 2 mm : 1.5 - 2 mm : 5 : 5 : 1000 mm fully automatic bending in two ways without the need to rotate the sheet hydraulic drive BMS MULTI-Touch with automatic depth stop powered rotary shear additional rail on the bending beam material support 2x foot pedal safety equipment accoring to the control rules BG Germany 3 year warranty on stands and tension arms. Quality Made in Germany. FURTHER MODELS FROM3 UP TO12 M LENGTH AND FROM 1,25 MM UP TO 2,00 MM BENDING CAPACITY ON REQUEST. OPTIONS: Preserving material support made out of synthetics price on request Hydraulic radius adjustment (air gap adjustment) the bending capacitiy of aluminium rises up to 2,5mm price on request Extended depth 20 - 1.250 mm price on request Conical depth stop to bend conical profiles and narrow/wide bendings for easy intermateing price on request F ...

: neu : 12 - 14 Wochen ab Auftrag : Deutschland : 5010 mm : 2 mm : 1.5 mm : 4 : 4 : 1000 mm fully automatic bending in two ways without the need to rotate the sheet hydraulic drive BMS MULTI-Touch with automatic depth stop powered rotary shear additional rail on the bending beam material support 2x foot pedal safety equipment accoring to the control rules BG Germany 3 year warranty on stands and tension arms. Quality Made in Germany. FURTHER MODELS FROM3 UP TO12 M LENGTH AND FROM 1,25 MM UP TO 2,00 MM BENDING CAPACITY ON REQUEST. OPTIONS: Preserving material support made out of synthetics price on request Hydraulic radius adjustment (air gap adjustment) the bending capacitiy of aluminium rises up to 2,5mm price on request Extended depth 20 - 1.250 mm price on request Conical depth stop to bend conical profiles and narrow/wide bendings for easy intermateing price on request Fully au ...

60 m³ / 60,000 l extinguishing water tank according to DIN 14230 Tank volume: 60,000 liters / 60 m³ Length: approx. 12,680 mm Diameter: approx. 2,500 mm Weight approx. 9,500 kg Material: Steel material S 235 JRG 2 Underground tank for underground storage according to DIN 6608, single or double-walled, suitable for the walkable and passable area (load class SLW 30) with 1 dome (manhole) DN 600 with blind lid, seal and screws. New or used immediately available! The container is emptied, cleaned, overhauled and tested for leaks by us as a specialist company. The container complies with the regulations of DIN 14230 (Underground extinguishing water tank): - Extinguishing water suction connection according to DIN 14244 with a mounted Fire brigade coupling / fixed coupling A according to DIN 14319 in the Form B version without bearing nozzle - Vent flange nozzle in NWN 1 ...

50 m³ / 50,000 l extinguishing water tank according to DIN 14230 Tank volume: 50,000 liters / 50 m³ Length: approx. 10,700 mm Diameter: approx. 2,500 mm Weight approx. 8,000 kg Material: Steel material S 235 JRG 2 Underground tank for underground storage according to DIN 6608, single or double-walled, suitable for the walkable and passable area (load class SLW 30) with 1 dome (manhole) DN 600 with blind lid, seal and screws. New or used immediately available! The container is emptied, cleaned, overhauled and tested for leaks by us as a specialist company. The container complies with the regulations of DIN 14230 (Underground extinguishing water tank): - Extinguishing water suction connection according to DIN 14244 with a mounted Fire brigade coupling / fixed coupling A according to DIN 14319 in the Form B version without bearing nozzle - Vent flange nozzle in NWN 1 ...

: neu : 12 - 14 Wochen ab Auftrag : Deutschland : 6400 mm : 2 mm : 1.75 mm : 6 : 1000 mm fully automatic bending in two ways without the need to rotate the sheet hydraulic drive BMS MULTI-Touch with automatic depth stop powered rotary shear additional rail on the bending beam material support 2x foot pedal safety equipment accoring to the control rules BG Germany 3 year warranty on stands and tension arms. Quality Made in Germany. FURTHER MODELS FROM3 UP TO12 M LENGTH AND FROM 1,25 MM UP TO 2,00 MM BENDING CAPACITY ON REQUEST. OPTIONS: Preserving material support made out of synthetics price on request Hydraulic radius adjustment (air gap adjustment) the bending capacitiy of aluminium rises up to 2,5mm price on request Extended depth 20 - 1.250 mm price on request Conical depth stop to bend conical profiles and narrow/wide bendings for easy intermateing price on request Fully autom ...

workpiece diameter: 250 mm centre distance: 0 mm honing length max.: mm max. module: 5 Gear Ø, min./max. 10 / 250 mm Module range 1 - 5 Length of teeth / max. table stroke 500 mm Height of centres of tailstocks 220 mm Max. weight of workpiece 50 / 100 kg Honing head swivelling +/- 35 ° Speeds of honing tool 20 - 500 rpm Size of honing tool, Ø x width 300 x 40 mm Workpiece speeds 500 - 3,000 rpm Total adjustment of cross slide 270 mm Rapid traverse of cross slide 50 mm Infeed travel of cross slide, mechanical 1 - 8 mm/Ø Roughing / finishing infeed 1 - 29 / 0.2 - 2.8 mm/sec Table speeds, hydraulic 0 - 6 m/min Total electrical load 5.5 kW - 380 V - 50 Hz Weight 3,200 kg Accessories / Special Features Working parameters can be preset using counters and control units. Automatic working process with workpiece counter. All roughing and finishing infeeds can be adjusted by a decade switch ...