conical tanks used for sale

Several 150 m³ storage tanks made of steel (extinguishing water tanks) lying underground Volume: 150,000 liters Diameter: approx. 3,000 mm Length: approx. 22,500 mm Weight: approx. 28,000 kg The tanks are converted into underground extinguishing water tanks in accordance with DIN 14230: The tank has an extinguishing water suction connection according to DIN 14244 with a mounted fire brigade coupling / fixed coupling A according to DIN 14319 in the version form B without bearing nozzle. Furthermore, the tank has a vent flange nozzle in NW/DN 100 with cap in a total length of approx. 1,300 mm suitable for 800 mm earth cover and 500 mm above ground. - the container is emptied, cleaned and has been provided with a bitumen exterior paint by us at the factory - if necessary, we can equip the tank with an inner full coating based on bitumen (against corrosion) or epoxy res ...

: neu : 12 - 14 Wochen ab Auftrag : Deutschland : 6400 mm : 2 mm : 1.25 mm : 1.5 - 2 mm : 4 : 4 : 1000 mm fully automatic bending in two ways without the need to rotate the sheet hydraulic drive BMS MULTI-Touch with automatic depth stop powered rotary shear additional rail on the bending beam material support 2x foot pedal safety equipment accoring to the control rules BG Germany 3 year warranty on stands and tension arms. Quality Made in Germany. FURTHER MODELS FROM3 UP TO12 M LENGTH AND FROM 1,25 MM UP TO 2,00 MM BENDING CAPACITY ON REQUEST. OPTIONS: Preserving material support made out of synthetics price on request Hydraulic radius adjustment (air gap adjustment) the bending capacitiy of aluminium rises up to 2,5mm price on request Extended depth 20 - 1.250 mm price on request Conical depth stop to bend conical profiles and narrow/wide bendings for easy intermateing price on req ...

sheet width: 2100 mm plate thickness: 13 mm pre-bending: 10 mm upper roll diameter: 230 mm lower roll diameter: 210 mm side roll diameter: 190 mm total power requirement: 7,5 kW weight of the machine ca.: 4.620 kg dimensions of the machine ca.: 4150x1400x1300 mm Accessories / equipment: - Conical bending device - induction hardened rolls - digital display for side rollers - Machine made of steel construction - Separate control panel - two speeds - all rollers on ball bearings - Folding and support bearing from the top roller is actuated from the control panel. When the folding bearing is opened, the roller moves automatically upwards. - Conical adjustment of the rollers via control panel - Central rollers are via hydraulic motor and rotary reduction gear driven. (Top and bottom rollers) - Calibration The data for this ad was created with ModulMWS - the software solution of LogoTech oHG ...

sheet width: 4100 mm plate thickness: 35 mm pre-bending: 28 mm upper roll diameter: 540 mm lower roll diameter: 541 mm side roll diameter: 440 mm total power requirement: 37 kW weight of the machine ca.: 48.100 kg Machine dimensions approx.: 7670x3000x2930 mm Accessories / equipment: - Conical bending device - induction hardened rolls - digital display for side rollers - Machine made of steel construction - Separate control panel - two speeds - all rollers on ball bearings - Folding and support bearing from the top roller is actuated from the control panel. When the folding bearing is opened, the roller moves automatically upwards. - Conical adjustment of the rollers via control panel - Central rollers are via hydraulic motor and rotary reduction gear driven. (Top and bottom rollers) - Calibration The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

100.000 Liter water tank - Earth tank for underground storage, single or double walled, 1 dom DN 600 with blind lid incl. seal and screws - used - Tank volume: 100,000 liters / 100 m³ Length: approx. 15,750 mm Diameter: approx. 2,900 mm Weight approx. 11,600 kg Material: Steel material S 235 JRG 2 - the container is emptied, cleaned and has been provided with a bitumen exterior paint by us at the factory - if necessary, we can equip the tank with an inner full coating based on bitumen or epoxy resin inner coating (against corrosion) - it is also possible to line the container with a plastic inner shell - as standard, the container receives an inflow or overflow suitable for 100 KG pipe (other nominal diameters are also possible) A cost-effective delivery with your own truck is possible. Simply tell us the place of delivery, you will then immediately receive the exact ...

sheet width: 2050 mm plate thickness: 4,5 mm pre-bending: 4,0 mm min. dia.: 210 mm roll diameter: 140 mm weight of the machine ca.: 1530 kg dimensions of the machine ca.: 3220x1200x900 mm Standard features: - Central rollers via electric motor, planetary reduction gear and Gear drive driven - Swivel top roller - Main engine with brake device - Conical bending device - Mobile controller and foot pedal - CE mark / Declaration of Conformity Additional equipment: - motorized rear roller adjustment - Digital display for back roller - induction hardened rolls The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

sheet width: 1050 mm plate thickness: 3,3 mm pre-bending: 3,0 mm roll diameter: 90 mm min. dia.: 130 mm total power requirement: 1,1 kw weight of the machine ca.: 570 kg dimensions of the machine ca.: 2100 x 800 x 1130 mm Domestic equipments: - Asymmetrical 3-roll round bending machine with motor drive - Upper roller swung out - Conical bending device - Main engine with brake device Additional equipment: - motorized rear roller adjustment - Digital display for back roller - induction hardened rolls The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

sheet width: 2100 mm plate thickness: 8 mm pre-bending: 6 mm upper roll diameter: 190 mm lower roll diameter: 170 mm side roll diameter: 150 mm total power requirement: 3 kW weight of the machine ca.: 3.450 kg Machine dimensions approx.: 4040x1380x1255 mm Accessories / equipment: - Conical bending device - induction hardened rolls - digital display for side rollers - Machine made of steel construction - Separate control panel - two speeds - all rollers on ball bearings - Folding and support bearing from the top roller is actuated from the control panel. When the folding bearing is opened, the roller moves automatically upwards. - Conical adjustment of the rollers via control panel - Central rollers are via hydraulic motor and rotary reduction gear driven. (Top and bottom rollers) - Calibration The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

sheet width: 3100 mm plate thickness: 25 mm pre-bending: 20 mm upper roll diameter: 390 mm lower roll diameter: 360 mm side roll diameter: 300 mm total power requirement: 18,5 kW weight of the machine ca.: 17.100 kg Machine dimensions approx.: 5800x2100x2000 mm Accessories / equipment: - Conical bending device - induction hardened rolls - digital display for side rollers - Machine made of steel construction - Separate control panel - two speeds - all rollers on ball bearings - Folding and support bearing from the top roller is actuated from the control panel. When the folding bearing is opened, the roller moves automatically upwards. - Conical adjustment of the rollers via control panel - Central rollers are via hydraulic motor and rotary reduction gear driven. (Top and bottom rollers) - Calibration The data for this ad was created with ModulMWS - the software solution of LogoTech oHG. ...

Agitator REITZ RW012X244 Agitator 0.12 KW with gear motor ELVEM and 2-wing Inclined blade stirrer 244 mm With traverse made of aluminum profiles 45 45 mm. Gear motor: worm gear motor ELKEM, 3 x 230/400 volts, 0.12 kW, n1 = 1395 rpm, IP 55, weight approx. 8 kg. With motor protection plug. Available in 3 agitator speeds: n2 = 14 rpm (i = 100), n2 = 23 rpm (i= 60), n2 = 23 rpm (i= 56). Shaft: precision stainless steel shaft D20, length 1000 mm, diameter 20 mm, Material stainless steel 1.4571. With rigid coupling made of stainless steel 1.4571 Very slow-running, high-torque agitator for use in attachment tanks or cooking kettles.

sheet width: 1250 mm plate thickness: 5,5 mm pre-bending: 5,0 mm roll length: 1280 mm min. dia.: 210 mm roll diam. toproll: 140 mm weight: 1365 kg range L-W-H: 2.020 x 900 x 1.200 mm Standard features: - Central rollers via electric motor, planetary reduction gear and Gear drive driven - Swivel top roller - Main engine with brake device - Conical bending device - Mobile controller and foot pedal - CE mark / Declaration of Conformity Additional equipment: - motorized rear roller adjustment - Digital display for back roller - induction hardened rolls The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

sheet width: 1500 mm plate thickness: 5 mm pre-bending: 4 upper roll diameter: 185 mm lower roll diameter: 185 mm side roll diameter: 145 mm total power requirement: kW weight of the machine ca.: t dimensions of machine L x W x H: 4,0 x 1,23 x 1,6 m - conical bending - pneumatic hinged bearing The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Sheet thickness: 4,5 mm Bending length: 1270 mm Number of rolls: 3   A-Symetric rolls 700 N/mm2 Conical bending attachment Upper rolll swivabel Central lubrication   Rolling width:                 1270mm Rolling thickness 5x toproll Ø:4,5mm Rolling thickness prebending:  4,5mm Top Roll Ø:                    130mm Bottom Roll Ø:                 130mm Side roll Ø:                   130mm Number of rolls:               3 Rolling speed:                 6 M/Min Power:                         2,2kW Height:    &nb ...

max. wheel diameter: 215 mm gear width: 40,65 mm max. module: total power requirement: 20 kW weight of the machine ca.: 10 t Max. external Ø of workpiece 215 mm Tooth profile, height x width 16 x 40.65 mm No. of teeth 5 - 200 Max. tooth ratio 1 : 10 Grinding wheel Ø 51 - 190 mm Grinding wheel speeds 1,000 - 6,000 rpm X Axis (horizontal) 152 mm Y Axis (vertical) 178 mm Z Axis (slide base plate) 304 mm Distance from middle of machine to middle of workspindle 115 mm Axial speed 125 mm/sec Workpiece speeds 0 - 30 rpm Workspindle bore, conical 3 29/32 inch Total electrical load 20 kW - 380 V - 50 Hz Weight, approx. 10,000 kg Accessories / Special Features FANUC CNC Control, Model 150 MB, for 7 axes, with monitor and direct input. Automatic calculation of all workpiece and grinding parameters. Extensive coolant equipment with filter system, band filter, etc. Driv ...

sheet width: 3000 mm plate thickness: 40 mm pre-bending: 35 mn number of rolls: 4 Walzen diameter of upper rolls: 550 mm roll diam. bottom roll: 480 mm speed: 1 - 4 m/min total power requirement: 66,0 kW weight of the machine ca.: 47,3 t dimensions of the machine ca.: 6,8 x 2,95 x 3,05 m Basic equipment: - Conical bending device - Swiveling top roller - Electrically adjustable rear roller - Conical bending device - driven top roller - Pre-bending device - brake motor - Safety device emergency leash - CE certified - documentation Options: Digital display for rear roller Hardened rollers 2 driven roller Rolling extension The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

sheet width: 2000 mm plate thickness: 10 mm pre-bending: 8 mn number of rolls: 4 Walzen diameter of upper rolls: 210 mm roll diam. bottom roll: 190 mm speed: 5 m/min total power requirement: 9,0 kW weight of the machine ca.: 5,45 t dimensions of the machine ca.: 4,05 x 1,47 x 1,55 m Basic equipment: - Conical bending device - Swiveling top roller - Electrically adjustable rear roller - Conical bending device - driven top roller - Pre-bending device - brake motor - Safety device emergency leash - CE certified - documentation Options: Digital display for rear roller Hardened rollers 2 driven roller Rolling extension The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

sheet width: 1270 mm plate thickness: 4 mm pre-bending: 3,5 mm diameter of upper rolls: 120 mm total power requirement: 2,2 KW weight of the machine ca.: 1,15 t dimensions of the machine ca.: 2500 x 800 x 1100 mm Basic equipment: - Conical bending device - Swiveling top roller - Conical bending device - driven top roller - Pre-bending device - brake motor - Safety device emergency leash - CE certified - documentation Options: Electrically adjustable rear roller Digital display for rear roller Hardened rollers The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

sheet width: 1500 mm plate thickness: 4 mm pre-bending: 3 mm number of rolls: 4 Walzen diameter of upper rolls: 150 mm roll diam. bottom roll: 130 mm speed: 6 m/min total power requirement: 3,3 kW weight of the machine ca.: 2,47 t dimensions of the machine ca.: 3350 x 1200 x 1210 m Basic equipment: - Conical bending device - Swiveling top roller - Electrically adjustable rear roller - Conical bending device - driven top roller - Pre-bending device - brake motor - Safety device emergency leash - CE certified - documentation Options: Digital display for rear roller Hardened rollers 2 driven roller Rolling extension The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

sheet width: 2570 mm plate thickness: 30 mm pre-bending: 25 mm diameter of upper rolls: 420 mm roll diam. bottom roll: 400 mm speed: 1,15 - 5 m/min total power requirement: 37 KW weight of the machine ca.: 19,04 t dimensions of the machine ca.: 5,25 x 2,3 x 2,35 mm Basic equipment: - Conical bending device - Swiveling top roller - Electrically adjustable rear roller - Conical bending device - driven top roller - Pre-bending device - brake motor - Safety device emergency leash - CE certified - documentation Options: Digital display for rear roller Hardened rollers 2 driven roller Rolling extension The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Powder mixing plant Ytron Dr. Karg, built in 2012 and with Flow tank. Capacity up to 10 to/h The powder was treated via pipes into the flow vessel. The whey or milk powder mixture was via the plate heater and hot water Cycle in batch operation with the basic tanks set and then released for further processing. With frame and staircase a.) With a GEA plate heater for treatment the powder water solution. Hersteler FA. GEA TDS GmbH, Sarstedt Type: VT 20 CD-9-C-16 170/7412 No. 3600 4074, year of construction 2012 b.) With wall-mounted control cabinet system Siemens S 7 for process technology, CIP tank system and Control of cleaning paths c.) With 1 CIP system for the standing tank as a 1-tank cleaning system for the Batch operation and for the powder mixing plant Self. Content CIP tanks 15,000 l insulated, deformed inwards in the upper area with valve no ...

sheet width: 2570 mm plate thickness: 16 mm pre-bending: 13 mm diameter of upper rolls: 320 mm roll diam. bottom roll: 300 mm speed: 1,15 - 5 m/min total power requirement: 22 KW weight of the machine ca.: 11,0 t dimensions of the machine ca.: 5,15 x 2,0 x 1,85 m Basic equipment: - Conical bending device - Swiveling top roller - Electrically adjustable rear roller - Conical bending device - driven top roller - Pre-bending device - brake motor - Safety device emergency leash - CE certified - documentation Options: Digital display for rear roller Hardened rollers 2 driven roller Rolling extension The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

sheet width: 3000 mm plate thickness: 4 mm pre-bending: 3 mn number of rolls: 4 Walzen diameter of upper rolls: 200 mm roll diam. bottom roll: 180 mm speed: 6,0 m/min total power requirement: 5,5 kW weight of the machine ca.: 4,85 t dimensions of the machine ca.: 4,9 x 1,39 x 1,4 m Basic equipment: - Conical bending device - Swiveling top roller - Electrically adjustable rear roller - Conical bending device - driven top roller - Pre-bending device - brake motor - Safety device emergency leash - CE certified - documentation Options: Digital display for rear roller Hardened rollers 2 driven roller Rolling extension The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

sheet width: 2500 mm plate thickness: 20 mm pre-bending: 16 mn number of rolls: 4 Walzen diameter of upper rolls: 350 mm roll diam. bottom roll: 260 mm speed: 1,5 - 5 m/min total power requirement: 23,5 kW weight of the machine ca.: 13,3 t dimensions of the machine ca.: 5,45 x 1,95 x 2,05 m Basic equipment: - Conical bending device - Swiveling top roller - Electrically adjustable rear roller - Conical bending device - driven top roller - Pre-bending device - brake motor - Safety device emergency leash - CE certified - documentation Options: Digital display for rear roller Hardened rollers 2 driven roller Rolling extension The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

A 7-stage GEA Wiegand evaporation plant with mechanical vapour compression, Made of V4A material with 2 identical high concentrators and one Vapour compression system for 2 Hoko systems. Capacity: 50,000 litres per hour Year of manufacture 2007 Product enema: 52,000 kg or 38,500 kg/h Concentrate: 12,240 kg or 18,900 kg/h for truck transport Steam consumption Low pressure steam : 300 kg/h with Live steam: 1,000 kg/h, when heating the system max. 2,300 kg/h further energy data can be found in the plant With a concentrate supply tank and with a complete cleaning system, location ground floor with complete tank piping to 2 x 50,000 l tanks and with complete control in Siemens S 7, as well as for the Entire electrical supply with 5 wall control cabinets for pneumatic cabling housed in 5 control cabinets, with various smaller frequency converters and 1 frequency con ...

: neu : 12 - 14 Wochen ab Auftrag : Deutschland : 8020 mm : 2 mm : 1.5 mm : 1.5 - 2 mm : 6 : 6 : 1000 mm fully automatic bending in two ways without the need to rotate the sheet hydraulic drive BMS MULTI-Touch with automatic depth stop powered rotary shear additional rail on the bending beam material support 2x foot pedal safety equipment accoring to the control rules BG Germany 3 year warranty on stands and tension arms. Quality Made in Germany. FURTHER MODELS FROM3 UP TO12 M LENGTH AND FROM 1,25 MM UP TO 2,00 MM BENDING CAPACITY ON REQUEST. OPTIONS: Preserving material support made out of synthetics price on request Hydraulic radius adjustment (air gap adjustment) the bending capacitiy of aluminium rises up to 2,5mm price on request Extended depth 20 - 1.250 mm price on request Conical depth stop to bend conical profiles and narrow/wide bendings for easy intermateing price on requ ...

sheet width: 1000 mm plate thickness: 5,0 mm distance between columns: 1070 mm diameter of upper rolls: 130 mm total power requirement: 4,0 KW weight of the machine ca.: 1,15 t dimensions of the machine ca.: 2,55 x 0,65 x 1,1 mm - Electrically adjustable rear roller - Electrically adjustable lower roll (material clamping) - Digital readout for rear roller movement - Digital readout for lower roll movement (material clamping) - Hardened rolls - Conical rolling - Swiveling top roll - Brake motor - Emergency stop - Documentation - 400V The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

sheet width: 610 mm plate thickness: 1,0 mm distance between columns: 620 mm diameter of upper rolls: 38 mm total power requirement: Handbetrieben weight of the machine ca.: 40 Kg dimensions of the machine ca.: 950 x 270 x 360 mm Sheet bending machine with: - Capacity 1050 x 2 mm - High strength wrought iron rollers with SAE 1050 certificate. - Footswitch - conical bending - Swiveling top roller - Safety device emergency leash - Documentation - 400 volts - CE certificate The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Universal crimping system for tank bottoms or container bottoms of all kindsFabr. ECKOLD type BA 75, year of construction 1976Max. Floor size: 4000 x 4000 mmMax. Material thickness aluminum: 5.0 mm: Steel: 4.0 mm: VA: 3.0 mmHorizontal reach: 2150 mmVertical projection: 1320 mmhydr. Cylinder stroke: 1000 mmMax. Pressure: 110 barMax. Compressive force: 55 kNDrive power: 7.5 kWOutside dimensions approx: 3030 x 1030 x 1410 mmWith- Swiveling extension arm 0 - 200 °- built-in hydraulic cylinder- Flare shape receiving head- turntable- Hydraulic unit- pneum. Lifting and balancing device (Conco-Balancier)- mobile crimping device and pressure tongs type B 75 - 50xa0xa0 Worker 7.5 Mpxa0xa0 Pressure 490 barxa0xa0 Horizontal reach 150 mmxa0xa0 Projection vertical 230 mmxa0xa0 Weight approx. 45 kgThe universal flaring system is suitable for flanging all common tank or container bottoms in round, oval ...

number of tanks: 60 Number of floors: 12 Stk. Width of floors: 300 mm Shelf height: 552 mm max. load: kg weight: 4,3 kg dimensions: 300 x 552 x 150 mm Dimensions of the container 26 x 40 x 16 cm. Internal dimensions of the containers 23 x 35 x 15.5 cm. MDF cover plate thickness 10 mm. PP material (polypropylene) Overall dimensions 85 x 40 x 165 cm. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

sheet width: 1070 mm plate thickness: 2,0 mm distance between columns: 1100 mm diameter of upper rolls: 76 mm total power requirement: Handbetrieben weight of the machine ca.: 0,22 t dimensions of the machine ca.: 1,8 x 0,8 x 1,3 mm Sheet bending machine with: - Capacity 1050 x 2 mm - High strength wrought iron rollers with SAE 1050 certificate. - Footswitch - conical bending - Swiveling top roller - Safety device emergency leash - Documentation - 400 volts - CE certificate The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Hydraulic four-roll plate bending machine Fabr. Haeusler type VRM HY 2000-6Machine number: 1186-1968, built in 1968Max. Working width approx. 2040 mmMax. Druchgang approx: 2100 mmMax. Sheet thickness with bend: 6 mmUpper and lower roller diameter each approx: 250 mmSide roller diameter approx.: 200 mmStroke of rollers approx. Each: 220 mm2 working speedsTotal drive power approx: 18 KWWorking height approx: 1300 mmSpace required: L 5450 x D 1900 x H1930 mmWeight approx: 10500 kgWith:- Both side rollers with mot. delivery for bending + conical bending- hydr. Folding bearing for removing the sheet metal- Slip clutch- Right-left purchase- separate control panelused, in good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are ...

sheet width: 1550 mm plate thickness: 6,5 mm pre-bending: 4,5 mm diameter of upper rolls: 150 mm side roll diameter: 130 mm diameter of lower rolls: 150 mm distance: max. OW zu UW 20,0 mm total power requirement: 2,2 + 1,5 kW weight of the machine ca.: 2.370 kg. range L-W-H: 3.300 x 1.200 x 1.300 mm Furnishing: - hydraulic 4-roll bending machine - separate control panel - hardened rolls SAE 1050 CK 45 - Conical bending device - 3 digital displays for exact roller positions - hydraulic folding storage The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

sheet width: 1050 mm plate thickness: 3,3 mm pre-bending: 3,0 mm roll length: 1050 mm roll diameter: 90,0 mm min. dia.: 130,0 mm engine output: 1,1 kW weight: 570 kg range L-W-H: 1.800 x 800 x 1.130 mm Furnishing: - Asymmetrical 3-roll bending machine with motor drive - hardened rollers - Motorized rear roller adjustment - Upper roller can be swiveled out - Conical bending device - self-braking main engine - digital display - foot switch The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

sheet width: 1270 mm plate thickness: 2,5 mm roll length: 1270 mm roll diam. toproll: 90,0 mm engine output: 1,1 kW bending speed: 6,0 m/min weight: 520 kg Furnishing: - motor-driven asymmetrical 3-roll round bending machine - hardened rollers - manual folding warehouse for quick removal of the workpiece - Profile inlets i.d. Rollers - Double foot switch for R / L run and emergency stop button - Conical bending device - rear roller manually adjustable - electr. Safety device The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

sheet width: 1250 mm plate thickness: 5,5 mm pre-bending: 5,0 mm roll diam. toproll: 140 mm min. dia.: 210 mm engine output: 2,2 kW turning speeds: 5,7 U/min weight: 1365 kg range L-W-H: 2.020 x 900 x 1.200 mm Furnishing: - 2 central rollers driven by an electric motor - Upper beam can be swiveled out - Conical bending device - foot switch - self-braking main engine - CE mark / declaration of conformity including special equipment: - Motorized rear roller adjustment - hardened rollers - digital display The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Hot and cold water high-pressure cleaner Working pressure: infinitely variable up to 500 bar Maximum requirement quantity: 14-30l /min Pump:3-Plunger,All-Ceramic Engine: Hatz,3-cylinder diesel (water-throated) Motor power:42kW Speed motor/pump: 2,350 /1,450 rpm Pump drive:V-belts Fuel consumption:approx. 5.3 l/h Volume fuel tanks:70l/105 l Volume water tank: 1000 l Pressure outlet:(water): M241.5 IG Heating capacity olburner: 291 kW (ca 95 °C) Consumption olburner: approx. 9.1 l/h Construction: self-supporting frame on frame with forklift pockets Empty weight: approx. 1,450 kg Mass: (LWH) 220+147177 Ground open (LWH) 307147246 Article no.: 1 491 030

sheet width: 4100 mm plate thickness: 13,0 mm ST pre-bending: 10,0 mm ST diameter of upper rolls: 360 mm side roll diameter: 250 mm diameter of lower rolls: 330 mm total power requirement: 11,0 kW weight of the machine ca.: 16.000 kg. dimensions of the machine ca.: 6542 x 1677 x 1900 mm Furnishing: - hydraulic 4 roll bending machine - Conical bending device, hydr. adjustable - Induction hardened rollers - Digital display for the two side rollers - mobile control panel - 2 speeds - hydraulic folding bearing - CE mark / declaration of conformity The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

sheet width: 3100 mm plate thickness: 16,0 mm ST pre-bending: 20,0 mm ST diameter of upper rolls: 360 mm side roll diameter: 250 mm diameter of lower rolls: 330 mm total power requirement: 15,0 kW weight of the machine ca.: 13.200 kg. dimensions of the machine ca.: 5542 x 2100 x 1983 mm Furnishing: - hydraulic 4 roll bending machine - Conical bending device, hydr. adjustable - Induction hardened rollers - Digital display for the two side rollers - mobile control panel - 2 speeds - hydraulic folding bearing - CE mark / declaration of conformity The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

sheet width: 4100 mm plate thickness: 8,0 mm ST pre-bending: 6,0 mm ST diameter of upper rolls: 300 mm side roll diameter: 210 mm diameter of lower rolls: 270 mm total power requirement: 7,5 kW weight of the machine ca.: 9.930 kg. dimensions of the machine ca.: 6532 x 1730 x 1489 mm Furnishing: - hydraulic 4 roll bending machine - Conical bending device, hydr. adjustable - Induction hardened rollers - Digital display for the two side rollers - mobile control panel - 2 speeds - hydraulic folding bearing - CE mark / declaration of conformity The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Cold water high-pressure cleaner Working pressure: 800 to 2,800 bar Required quantity: 8 to 27l/min Pump: Slow-running high-pressure pump with 3 carbide plungers, integrated reduction gear, compression lubrication and engine clamp Engine: VOLVO PENTA 4 CYLINDER Diesel,water-throated,5.200cm3 Engine power:160 kW,220 hp Motor/pump speed: 2,065rpm / 500 rpm Pump drive: Gearbox Fuel consumption:approx. 21 l/h Volume fuel tanks200l Volume water tank: 160l Volume urea tank: 25l Consumption urea: approx. 1.05 l/h Pressure outlet:(water): 9/16'' -18UNF LH IG or DYNAJET Easy Connect EC Chassis: 2-axle attachment Empty weight: 2.690kg Mass: (LWH)467197218 Ground open (LWH)487197254 Article no.: 1 610 040

sheet width: 3100 mm plate thickness: 8,0 mm ST pre-bending: 6,0 mm ST diameter of upper rolls: 230 mm side roll diameter: 210 mm diameter of lower rolls: 190 mm total power requirement: 7,5 kW weight of the machine ca.: 6.020 kg. dimensions of the machine ca.: 5142 x 1390 x 1300 mm Furnishing: - hydraulic 4 roll bending machine - Conical bending device, hydr. adjustable - Induction hardened rollers - Digital display for the two side rollers - mobile control panel - 2 speeds - hydraulic folding bearing - CE mark / declaration of conformity The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

sheet width: 2050 mm plate thickness: 4,5 mm max. plate thickness: 4,0 mm anbiegen roll length: 2050 mm min. dia.: 210 mm roll diam. toproll: 140 mm weight: 1530 kg range L-W-H: 3220 x 1200 x 900 mm Furnishing: - Upper and lower roller electr. driven - Upper roller can be swiveled out - Conical bending device - Asymmetrical roller arrangement - self-braking main engine - separate control and operating panel - Safety line - foot switch - Operating instructions in German - CE mark / declaration of conformity Special equipment included in the price: - hardened rollers - Motorized rear roller adjustment - digital display The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

sheet width: 2600 mm plate thickness: 10,0 mm pre-bending: 8,0 mm diameter of upper rolls: 230 mm side roll diameter: 190 mm diameter of lower rolls: 210 mm total power requirement: 7,5 kW weight of the machine ca.: 5.560 kg. range L-W-H: 4.650x1.380x1.300 mm Furnishing: - hydraulic 4 roll bending machine - Conical bending device - Induction hardened rollers - Digital display for the two side rollers - mobile control panel - 2 speeds - hydraulic folding bearing - Operating instructions in German - CE mark / declaration of conformity The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: neu : 12 - 14 Wochen ab Auftrag : Deutschland : 8200 mm : 2 mm : 2 mm : 1.5 - 2 mm : 8 : 8 : 1000 mm fully automatic bending in two ways without the need to rotate the sheet hydraulic drive BMS MULTI-Touch with automatic depth stop powered rotary shear additional rail on the bending beam material support 2x foot pedal safety equipment accoring to the control rules BG Germany 3 year warranty on stands and tension arms. Quality Made in Germany. FURTHER MODELS FROM3 UP TO12 M LENGTH AND FROM 1,25 MM UP TO 2,00 MM BENDING CAPACITY ON REQUEST. OPTIONS: Preserving material support made out of synthetics price on request Hydraulic radius adjustment (air gap adjustment) the bending capacitiy of aluminium rises up to 2,5mm price on request Extended depth 20 - 1.250 mm price on request Conical depth stop to bend conical profiles and narrow/wide bendings for easy intermateing price on reques ...

Pellet mill for ring DIE and two roll shell system. Inside diameter: 900 mm Active operating width: 138mm Active forming area: 3902 cm² Press roll Ø440/142 optionally dimpled or notched Front door Stainless steel front door with large opening angle. pneumatic operated overload bypass protection gate. Two knives with step less length adjustments integrated in the door. Machine housing All housing parts are cut by precision laser. The machine base, the base plate and the housing are welded and reinforced. Drive Drive via 355 kW-1200 rpm engine , timing belt Ø200/1900 - Beltdrive Motor and Motor cables not included. Equipment Central lubrication for roll assembly and main shaft Manual roll adjustment Overload protection provided by a safety pin Die of chrome steel X46 Cr13 with conical seat for an easy change of the die - Die is not included Adjustable defle ...

: neu : 12 - 14 Wochen ab Auftrag : Deutschland : 4010 mm : 2 mm : 1.5 mm : 1.5 - 2 mm : 3 : 3 : 1000 mm Fully automatic bending in two ways without the need to rotate the sheet Hydraulic drive BMS MULTI-Touch with automatic depth stop Powered rotary shear Additional rail on the bending beam Material support 2x foot pedal Safety equipment accoring to the control rules BG Germany 3 year warranty on stands and tension arms. Quality Made in Germany. FURTHER MODELS FROM3 UP TO12 M LENGTH AND FROM 1,25 MM UP TO 2,00 MM BENDING CAPACITY ON REQUEST. OPTIONS: Preserving material support made out of synthetics price on request Hydraulic radius adjustment (air gap adjustment) the bending capacitiy of aluminium rises up to 2,5mm price on request Extended depth 20 - 1.250 mm price on request Conical depth stop to bend conical profiles and narrow/wide bendings for easy intermateing price on requ ...

: neu : 12 - 14 Wochen ab Auftrag : Deutschland : 6400 mm : 2 mm : 1.5 mm : 1.5 - 2 mm : 5 : 5 : 1000 mm fully automatic bending in two ways without the need to rotate the sheet hydraulic drive BMS MULTI-Touch with automatic depth stop powered rotary shear additional rail on the bending beam material support 2x foot pedal safety equipment accoring to the control rules BG Germany 3 year warranty on stands and tension arms. Quality Made in Germany. FURTHER MODELS FROM3 UP TO12 M LENGTH AND FROM 1,25 MM UP TO 2,00 MM BENDING CAPACITY ON REQUEST. OPTIONS: Preserving material support made out of synthetics price on request Hydraulic radius adjustment (air gap adjustment) the bending capacitiy of aluminium rises up to 2,5mm price on request Extended depth 20 - 1.250 mm price on request Conical depth stop to bend conical profiles and narrow/wide bendings for easy intermateing price on requ ...

: neu : 12 - 14 Wochen ab Auftrag : Deutschland : 6400 mm : 2 mm : 2 mm : 1.5 - 2 mm : 7 : 7 : 1000 mm fully automatic bending in two ways without the need to rotate the sheet hydraulic drive BMS MULTI-Touch with automatic depth stop powered rotary shear additional rail on the bending beam material support 2x foot pedal safety equipment accoring to the control rules BG Germany 3 year warranty on stands and tension arms. Quality Made in Germany. FURTHER MODELS FROM3 UP TO12 M LENGTH AND FROM 1,25 MM UP TO 2,00 MM BENDING CAPACITY ON REQUEST. OPTIONS: Preserving material support made out of synthetics price on request Hydraulic radius adjustment (air gap adjustment) the bending capacitiy of aluminium rises up to 2,5mm price on request Extended depth 20 - 1.250 mm price on request Conical depth stop to bend conical profiles and narrow/wide bendings for easy intermateing price on reques ...

Stock number: U2395-3 Used vertical stainless steel silos for powders with total volume about 6000 l. Tank has internal diameter 180 cm x length of straight side of wall 144 cm. Silos has conical bottom, equipped with vibrating discharge outlet driven by el vibrating motor and pneumatically operated valve. Diameter of discharge 200 mm. Silos had been mounted on cylindrical support. Feeding inlet via top located connection to pneumatic conveyer. Silos has side wall rectangular connection for dust filter with dimensions 570 mm x 490 mm. There is a inspection manway with bolted lid with diameter 500 mm. Last time used in food industry.

roll diameter: 150 mm roll length: 300 mm rolls drilled: Flaschenhals Nip adjustment: hydraulisch total power requirement: 4 kW condition: used, overhauled Specification: Laboratory Rolling Mill 150 x 300 mm - second-hand Motor under the rollers - Roller diameter approx.: 150 mm - roller length: 300 mm - Friction between the rollers - Rolls drilled with central chamber for water cooling - Rolls with new slewing rings, manufacturer MAIER, for water cooling, - Rollers mounted on bronze bushes with circulating oil lubrication via pump, - Gap adjustment: NEW, hydraulic and as emergency system - Hydraulic unit NEW - NUE Tilting guide plates - NEW safety cage - Safety brake for emergency stop - AC brake motor: 4 kW - 400 Volt - 50 Hz - new mixing tanks made of stainless steel for the mixture - Safety devices according to current EN 1417:3/2015 - Painting: in RAL colours accordin ...