compres used for sale

Compressor JUN-AIR Model 300 Final compression pressure: approx. 8 bar Engine: GRUNDFOS 71B4-24FT100-B 0,25 kW 1380 rpm 220 - 240 V 1AC IP54 used tested ! Dimensions 310 x 140 x 200 mm

Pressure vessel, compressed air tank with bracket M. SCHNEIDER KOMPRESSORENWERK BLITZ Kompressoren Content: 50 litres Type mark: ZU24/13 Operating pressure: 11 atm ( approx. 11.8 bar ) spare part for construction machine PAUL ERNST FG3-1400 ! used, checked ! Dimensions: 970 x 350 x 440 mm

Pressure vessel, compressed air tank with bracket OTTO KLEIN STAHLBLECHVERARBEITUNG OKS Content: 50 litres Type marking: ZU24/922 Operating pressure: 11 bar 486315 RST372 Connections ( internal thread ): 2 x R1/4, 4 x R1/2 used, tested ! Dimensions: 960 x 270 x 400 mm

oil tank for compressor system ALUP / BWB 228 00249 ( 22800249 ) SPH265HH Bj.; 1997 used, checked ! Dimensions: 1800 x 900 x 1650 mm

Pressure vessels, compressed air tanks with bracket and connections UDO KLEUSBERG GmbH X20.7.040.06 Pressure Equipment Directive (PED): 97/23/EC Content: 40 litres Operating pressure: 11 bar Connections ( internal thread ): 2 x R 1 1/2, 2 x R1 ( inch ) used, tested ! Dimensions ( boiler ): Ø 280 x720 mm Dimensions ( packaging ): 885 x 460 x 320 mm

Pressure vessels, compressed air tanks with bracket and connections UDO KLEUSBERG GmbH 01.20.7.040.06 Pressure Equipment Directive (PED): 97/23/EC capacity: 40 litres operating pressure: 11 bar Connections ( internal thread ): 2 x R 1 1/2, 2 x R1 ( inch ) used, tested ! Dimensions ( boiler ): Ø 280 x720 mm Dimensions ( packaging ): 870 x 550 x 320 mm

Screw compressor, compressor SÜD SOLAR GmbH type L30 P max: 15 bar Q: 3.4 m3/min engine: 30 kW 380 V 3AC 50 Hz As good as new ! Top condition ! Dimensions: 1290 x 940 x 1420 mm

Pressure vessel, compressed air tank, upright BOGE KOMPRESSOREN ZU 24 / 36 Capacity: 1500 liters zul. Operating pressure: 11 bar zul. Operating temperature: +50 °C Connections ( boiler ): 4x 2 ( inches ), 3x 1/2 ( inches ) Connections ( top ): 1x 1/2 ( inches ) Connections ( bottom ): 1x 1 ( inch ) Material: Steel, galvanized used, tested ! Dimensions ( pressure vessel ): 1000 x 1000 x 1970 mm Dimensions ( transport ): 1440 x 1140 x 2200 mm

Pressure vessels, compressed air tanks SILIT - WERKE 3.5239.4-EG capacity: 200 litres zul. Operating pressure: 15 bar max. Operating temperature: +100 °C Main connectors: 1x 21/4 ( inches ), 1x 21/2 ( inches ) various auxiliary connectors: 3/8 ( inches ) to 1 ( inches ) Material: Steel, painted used, tested ! Dimensions: 1450 x 500 x 1100 mm

Compressor Kaeser DS 200 ( DS200 ) Volumetric flow: 16,75 m3/min Discharge pressure: 10 bar Operating hours: 110372 Load hours: 7436 Drive power: 110 kW Weight: 2.3 t Year of construction: 1993 used, tested ! Dimensions: 2400 x 1630 x1820 mm

Compression measuring device, compression tester, compression tester FAG 10 / 250 bar measuring range 1: 0 - 250 bar measuring range 2: 0 - 10 bar for petrol and diesel engines with 9 adapter screws approx. 2,0 m measuring hose 2x pressure gauge from BARBY & Kühner Untersiemau massive Aluminium housing used, tested ! Dimensions: 335 x 220 x 300 mm

Compressed air turbine vibrator, vibrator, external vibrator NICE VIBRATION NCT 55 ( NCT55 ) Working torque: 0,545 cmkg frequency: 11000 - 15760 1/min operating pressure: 2 - 6 bar air consumption: 386 - 918 l/min compressed air connection: 3/8 ( inch ) used, tested ! Dimensions (vibrator, without connectors): 160 x 73 x 100 mm

Compressed air lubricators STANKO B44-163 p: 10 kg/cm² ( ca.10 ba r) Connections: G1 ( inch ) installation length: 103 mm color oil tank: yellow or clear New ! Dimensions: 270 x 105 x 85mm

T-compression fitting, 5 pieces GRESSEL SERTO SO 3021-15 Pipe outer diameter: Ø 15 mm Material: Brass New ! Dimensions(Single): 97 x 61 x 27 mm Dimensions(packaging): 140 x 90 x 90 mm

Pneumatic piston vibrator, vibrator, external vibrator, with additional vibration mass NICE VIBRATION NTK 25 AL working torque ( without additional vibration mass ): 1,,18 - 1.24 cmkg frequency ( without additional vibration mass ): 1289 - 1986 1/min Operating pressure: 2 - 6 bar Air consumption ( without additional vibration mass ): 34 - 149 l/min Compressed air connection: 1/4 ( inch ) Additional vibration mass: SM 25 - 1 diameter: Ø 50 mm, height: 20 mm, bore: Ø 16.5 mm New ! with documents ! Dimensions ( vibrator ): 150 x 50 x 55 mm Dimensions ( packaging ): 170 x 70 x 60 mm

Compressed air reconditioning, maintenance unit, pressure regulator HELLER, NORGREN BEA 05 DC with filter regulator and fine filter Control range: 0.4 - 10 bar P: max. 10 bar Connections: 1/2 spare part for machining center HELLER BEA 05 DC used, tested ! Dimensions: 400 x 310 x 130 mm

Spring balancer with compressed air hose DESOUTTER 3HU 6.3 bar Load capacity: 0.5 - 1.4 kg extension: 1,300 mm used, tested ! Dimensions: 200 x 200 x 150 mm

dry-running claw compressor, claw compactor, low-pressure air pump, with air filter EUROVACUUM Type EVCP-0155 pumping speed: 150 m3/h final compression pressure: 2,,0 bar Connections: 1 1/2 ( inches ) Motor: SIGMA T3A 160M-2 B5 11,0 KW 2950 rpm 400 / 690 V 3AC 50 Hz ( 60 Hz operation is possible ) IP55 New ! Dimensions: 1120 x 430 x 630 mm

Compressor RIETSCHLE DFT 500 (22) ( DFT500(22) ) Article no.: 102109-2224 500 m3/h 0,9 bar Engine: 22 kW 380 / 660 V used, tested ! Dimensions: 1520 x 1050 x 1300 mm

Key data: 90 , 10 , 13

High quality oil screw compressor used in industrial plants, factories, production halls and larger workshops. This compressor uses direct drive, which is the most efficient way of drive. The helical stage is directly coupled to the electric motor by means of a flexible coupling. Thanks to this solution, there is no energy loss when transferring torque from the engine to the block, and energy consumption is significantly reduced. Manufacturer: AIRPOL Model: NB 90 Flow rate: 820 m3/h Pressure max. 1.0 MPa Motor power: 90 kW / 160 A Work counter under load: 27.062 h Weight: 1800 kg Year of Build: 2007 Full DTR documentation and UDT audit book with tank passport Technical condition: used machine

Immediately available from stock - about 30 second hand screw compressors Boge from 7.5 kW – 200 kW

Refrigeration compressor, compressor BITZER KÜHLMASCHINENBAU GmbH 4VC-10.2Y-40P Flow rate: 34.7 m3/h Speed: 1450 rpm Operating current: max: 21 A 380 - 420 V 3AC 50 Hz used. tested ! Dimensions: 800 x 600 x 500 mm

Capacity: 13 litres Pressure: 15 bar

Compression Nut VEOLIA, AQAFINE UVAFSP200582 40357 Diameter: Ø 25 mm Material: Stainless steel ( 316L ) New ! Dimensions ( packaging ): 160 x 110 x 40 mm

Compressor Oil (OEM), Compressor Lubricant ATLAS COPCO 2901-0245-01 Roto-Inject Fluid Capacity: 5 l for screw compressors ( GA, GX ) New ! Dimensions ( packaging ): 230 x 130 x 305 mm

Compressor Oil (OEM), Compressor Lubricant ATLAS COPCO 2901-0522-00 Roto-Inject Fluid Capacity: 20 l for screw compressors ( GA, GX ) New ! Dimensions ( packaging ): 300 x 260 x 385 mm

PROD. KAESER TYP DS201 S/N 1001 ROK 2002 MOC (kW) 110 WYDAJ. (m3/min) 22 CIS (bar) 10 GODZ (DOC/OGÓL) ok 17500

PROD. KAESER TYP CSD122 SFC S/N 5189 ROK 2011 MOC (kW) 75 WYDAJ. (m3/min) 2,20 -10,50 CIS (bar) 8,5

PROD. KAESER TYP BSD81 S/N 1432 ROK 2009 MOC (kW) 45 WYDAJ. (m3/min) 7.12 CIS (bar) 8 GODZ (DOC/OGÓL) 12304 / 20984

PROD. DOOSAN TYP 12235 S/N UN512235FAY893775 ROK 2010 MOC (kW) 224 WYDAJ. (m3/min) 23.4 CIS (bar) 13.1 GODZ (DOC/OGÓL) FALOWNIK nie WBUD. OSUSZACZ nie

Fabr. No.: 181308 Equipment / Additional information: Flow rate: 40 m3 / h Compression end pressure: 0.6 bar Motor power: 1.5 kW / 1400 U/min.

Cooling Compressor More then 300 machines new and second hand on our seema .de

Screw compressor Manafacture: Atlas Copco Type: GA15 VSD FF Year of construction: 2022 Operating hours: approx. 4,400 Weight: 280 kg Pressure vessels on request

year: 2015 max. working pressure: 42 bar rated power: 37 kW rotational shaft speed: 401 r/min. Keeping your production up and running 24/24 Designed for industrial service 24/24, Atlas Copco DX/DN compressors work reliably at all times without the need for constant supervision. Their sturdy design leads to extremely low vibration levels. Proof of their reliability can be found in the thousands of machines installed in the field, where they provide a smooth and reliable supply of air or nitrogen. Protecting your process with oil-free technology Oil-free compression safeguards the quality of the compressed air and nitrogen. In most applications, even the slightest pollution is unacceptable and could lead to high risks for your production. Atlas Copco supplies the highest quality of air and nitrogen with boosters certified to Class 0 according to ISO 8573-1.

2 stages Compressor Bitzer Type: S6F-30.2Y Volume: 101.1 m3/h Cooling capacity for R404A: 41 kW at -25°C/40°C, 25 kW at -40°C/40°C, 17 kW at -50°C/40°C Items in magazine: 1 Reference number: S182 Condition: Used in good condition Price on request, We have many other refrigeration machines: Bitzer, Copeland, Frascold, Lunite, Kueba, Guentner, Eco, Alfa-Laval, Goedhart, Helpman

Compressor Bitzer Type: 6GE-34Y-40P Volume: 126.8 m3/h Cooling capacity for R404A: 88 kW at -5°C/40°C, 73 kW at -10°C/40°C, 39 kW at -25°C/40°C Items in magazine: 2 Reference number: S181 Condition: Used in good condition Price on request, We have many other equipment : Bitzer, Copeland, Frascold, Lunite, Kueba, Guentner, Eco, Alfa-Laval, Goedhart, Helpman

Käser ASK 32 T with integrated cold dryer Screw compressor Age: 2008 Rated Output: 18.5 kW Max. working overpressure: 8 bar Motor speed: 2950 1/min Sigma Control Integrated refrigerant dryer

Compressor Bitzer Type: 6G-30.2Y Volume: 126.8 m3/h Cooling capacity for R404A: 88 kW at -5°C/40°C, 72 kW at -10°C/40°C, 38 kW at -25°C/40°C Items in magazine: 2 Reference number: S183 Condition: Used in good condition Price on request, We have many other equipment : Bitzer, Copeland, Frascold, Lunite, Kueba, Guentner, Eco, Alfa-Laval, Goedhart, Helpman

Year of construction: 1998 Rated Power: 11 KW 10 bar Good condition

Compressed air reservoir Year of construction: 1992 Operating pressure: 11 bar

PROD. KAESER TYPE ASD50 T SFC S/N 1442 YEAR 2014 POWER (kW) 25 OUTPUT (m3/min) 1.07-5.27 CIS (bar) 8.5 HRS (DOC/GENERAL) 12822/15055 WAVES yes BUILT. DRYER yes

PROD. KAESER TYP CSD122 SFC S/N 5189 ROK 2011 MOC (kW) 75 WYDAJ. (m3/min) 2,20 -10,50 CIS (bar) 8,5

PROD. KAESER TYP ASD47 SFC S/N 3068 YEAR 2013 POWER (kW) 25 EFFICIENCY (m3/min) 1.07-5.27 PRESSURE (bar) 8,5 INVERTER YES EXCHANGER YES

MADE BY KAESER TYPE AIRCENTER SK22T S/N 2324 YEAR 2012 POWER (kW) 11 SPEND. (m3/min) 1.85 PRESSURE (bar) 8 INVERTER no WBUD. DEHUMIDIFIER yes EXCHANGER no COOLED (POW/WATER) air ON THE TANK yes 350 L

Special helical compression spring, compression spring, 4 pieces FIBRO 241.14.50.076 Colour: Green Sleeve diameter: Ø 50 mm Mandrel diameter: Ø 25 mm Length of unloaded spring: 76 mm Travel: 30.5 mm travel max. (100%): 38 mm Working spring force: 3812.5 N spring force max. (100%): 4750 N New ! Dimensions ( single compression spring ): 340 x 112 x 112 mm

PROD. ALUP TYPE ALLEGRO110 S/N API178778 YEAR 2020 POWER (kW) 110 kw PUMP. (m3/min) 3.6-19.06 (7.0 bar) 3.72-18.3 (8.0 bar) 3.90-17.16 (9.5 bar) PRESSURE (bar) 10 HR (DOC/GENERAL) 22871 INVERTER YES

PROD. ATLASCOPCO TYP GA11VSDFF PLUS S/N API271305 YEAR 2020 POWER (kW) 11 EFFICIENCY. (m3/min) 1,9 PRESSURE (bar) 12.75 INVENTER YES DRYER YES

PROD. MATTEI TYP OPTIMA 30 S/N 3H0BEU-2010 YEAR 2010 POWER (kW) 30 EFFICIENCY. (m3/min) 5.34 PRESSURE (bar) 10

PROD. GARDNER DENVER TYP ES75-13 EANA S/N 19030150M YEAR 2003 POWER (kW) 75 EFICIENCY (m3/min) 8,86 PRESSURE(bar) 13

PROD. ATLASCOPCO TYP GA11VSDFF PLUS S/N API269757 YEAR 2019 POWER kW) 11 EFFICIENCY. (m3/min) 1,9 PRESSURE (bar) 12.75 HOURS(DOC/OGÓL) 18665 INVERTER YES DRYER YES