maximum number of results exceeded > 1000
please refine your search
Flow rate 750 l / min. Final pressure 13 bar installed motor power 7,5 kW highest operating speed 3750 RPM. Mass approx. 175 kg Dimensions WxDxH 700 x 700 x 1000 mm Temperature controller eliwell eWPC902T Operating hours counter Oil/water separation system BOGE Oekomat 5
Weight approx.: 200 kg Dimensions (l x w x h) approx.: 700 x 1050 x 1000 mm Description: - screw compressor model KS9, hp 7.5 engine, air flow 650 l / min & nbsp, <,/ p>, - ED13 model dryer, hp 0.5 <,/ p>, motor
HEBROCK edge banding machine for EURO 2000 used, BJ. 2002 good condition, functional for plastic edge u.Furniere edge thickness: roll goods 0.5-3 mm, solid up to 8 mm Workpiece width of min. 90 mm Workpiece thickness of min. 10 mm, 45 mm Workpiece length of min 260 mm Edge material height of 50 mm Material length of min. 330 mm Feed about 10 m / min Temperature control adjustable 0-220° C. with drive systems pull-out roller bearing rail -Glue quick heating basin -Rotary frequency converters for compound miter saw and Fräsmotore Yoke caps -2 combined milling units milling angle adjustment: 0-15 ° continuous, 22° and 30 ° El. Connection 7.5 kW Compressed ...
Weight approx.: 1100 kg Dimensions (l x w x h) approx.: 2300 x 1200 x 2200 mm Description: Complete KAESER compressed air production line consisting of: <,/ p>, n.1) screw compressor model SK 25 SFC, power 15 KW with inverter, air outlet 8 bar <,/ p>, n.1) air dryer model TC 31 <,/ p>, n.1) tank capait & agrave, 725 liters <,/ p>, n.1) condensation separator model ACQUAMAT CF6 <,/ p>, complete with connecting pipes <,/ p>,
CO2 Recovery Plant Union Engineering RBU 500 kg/h The recovery plant is specially designed to recover CO2 from fermentation processes at breweries. This complete CO2 plant was delivered by Union Engineering in 2005 and it has nominal CO2 removal capacity of 500 kg/h. CO2 compressor is two stage Mehrer piston compressor and refrigeration compressor is Sobroe operating with ammonia (R717). The plant has Siemens S7-300 PLC control system where operation is carried our via a 12” screen panel with Windows CE operating system. The delivery includes following main components: • Foam trap, material AISI 304 • Water scrubber for CO 2 gas flushing mainly from alcohol, capacity 1200 kg/ ...
Weight approx.: 300 kg Dimensions (l x w x h) approx.: 1200 x 800 x 1000 mm Description: Compressor with Pressuretank and Refrigeration dryer Operating pressure: 10 bar Transportdimensions: 1.200 x 800 x 1.000 mm, approx. 300 kg
CO2 Recovery Plant Union Engineering 500 kg/h The recovery plant is specially designed to recover CO2 from fermentation processes at breweries. This complete CO2 plant was delivered by Union Engineering in 1999 and it has nominal CO2 removal capacity of 500 kg/h. CO2 compressor is two stage Mehrer piston compressor and refrigeration compressor is Sobroe operating with ammonia (R717). The plant operation is controlled with Siemens S7-300 PLC. The delivery includes following main components: • Foam trap, material AISI 304 • Water scrubber for CO 2 gas flushing mainly from alcohol, capacity 1200 kg/h CO2, material AISI 304 (Common with another 500 kg CO2 recovery system) • Infl ...
Weight approx.: 200 kg Dimensions (l x w x h) approx.: 1200 x 800 x 1000 mm Description: Power: 11 kW Speed: 3.000 rpm Operating pressure: 10 bar Transportdimensions: 1.200 x 800 x 1.000 mm, approx. 200 kg
Air Compressor SIAD Tempo 950 Nm/min, 42 bars Complete good condition air compressor station for blowing PET bottles made by Italian SIAD Macchine Impianti in year 2003. The compressor is oil-free three stage glycol cooled piston compressor where third stage is mounted vertically which makes lifetime of piston rings and gaskets longer. Compressor FAD capacity is 950 m3/min and max discharge pressure is 42 bars. Skid mounted compressor and electric motor are isolated from the floor with vibration dampers. All air pipes are made of stainless steel for assuring the air quality. Station has MTA refrigerated high pressure air dryer, hp air bottle, control & MCC cabinet and Italian DECSA mad ...
Stork freezing belt, type: 3L40, year of construction: 2006, plastic belt, belt width: 1550 mm, dimensions: 13000 mm x 1820 mm x 1300 mm, Frigerest evaporator, type: APIE 4030, 400 V, 50 Hz, 750 W, 3 fans, dimensions 2800 mm x 850 mm x 1160 mm, (2x) Cryokit cooling compressors, type: 3026/Groupe DE, fabric number: 07-223-03, 07-223-02, year of construction: 1997, refrigerant: R404a, dimensions: 1500 mm x 1000 mm x 1230 mm.
Filling Line for PET Bottles Krones 12.000 bph This complete Krones PET Line for carbonated and non-carbonated soft drinks was built and commissioned in 1998 / 1999. It has been well maintained throughout, and over the years several components have been replaced with newer equipment. The line comes complete with two blow-molders (1999 & 2009), a 2014 Heuft FBI and TEC silos. Including in the delivery are the major spare parts for the general overhaul of the filler (gears, control panel etc). The line has no dry-end secondary packaging equipment included – but optional a bottle to crate solution can be offered. The line is currently installed and can be shown both dry & wet test run. ...
Ilsa shock freezer, type: ABV5043 ABB Harmony 20T 1P + 90°C / - 18?C, serial number: 1720.0112, 380-400 V, 3 Ph, 50/60 Hz, 550 W, maximum dimensions trolley: 720 mm x 900 mm x 1880 mm, inside dimensions: 730 mm x 960 mm x 1890 mm, total dimensions: 1350 mm x 1200 mm x 2250 mm, including Dorin cooling compressor, mode: H281CS / RIV, serial number: 160 80557H, 220-240 / 380-470 V, 50 Hz, 55/32 A, 12.6/7.3 F.L.A, dimensions compressor: 1000 mm x 700 mm x 500 mm. Never used.
Filling Line for Water in PET Bottles SIDEL 30600 bph This line was deivered by SIDEL in year 2003 and it has been filling sparkling water in 0.5, 1.5 and 2.0 liter PET bottles. The line is complete from blow molder to secondary packaging and palletizing. PET compressor, bottle inspector and bottle dryers are not included. This line includes a nitro dose system and a handle applicator for the shrink packs. The line is currently in operation and will be available in 2018. Product: Still and sparkling water Capacity: 30.600 bph in 0.5 L 15.500 bph in 1.5 L 14.000 bph in 2.0 L Bottle neck format: PCO 1881 short neck 28 mm Packages: Shrink pack, Euro pallet + tray Cont ...
Weight approx.: 500 kg Dimensions (l x w x h) approx.: 1350 x 850 x 1600 mm Description: Piston compressor Tank capacity approx. 600 liters Tank working pressure 12 bar
Cooling Compressor Sabroe SAB L233, cooling capacity 2282 kW Two large single-stage cooling compressors with capacity of 2282 kW/unit, manufactured by Sabroe Denmark in year 2008 but NEVER INSTALLED. Refrigerant is R717 – NH3 – and it has on built separator and heat exchanger. The compressors has advanced Unisab III control system. Technical data (two identical units): Manufacturer: Sabroe Denmark Manufacturing year: 2008 Type SAB L233 – two units Refrigerant: R717 Cooling capacity: 2282 kW Swept volume: 2818 m3/h Oil cooling capacity requirement: 90 kW Capacity control 10 – 100 % (inverter) Electric Drive 355 kW / 2950 rpm / 380 V / 50 Hz Evaporation temperat ...
Weight approx.: 30 kg Dimensions (l x w x h) approx.: 800 x 500 x 500 mm Description: Clock diameter max. 70 mm, thickness 28 mm, width over clock belt 85 mm, height clock support 75 mm, measuring range -300 to +1000 µm, air compressor JUN-AIR MODELL 6, motor 2.9 A, 2900 UpM, volume flow 0 bar up to 50 l/min, 8 bar 32 l/min
Fully automatic production line for long eggs with slicer Performance 550 long eggs/h (approx. 300 gram) Weight rods 330 gr. 1 production employee Energy: Heat transfer medium: thermal oil Connected load for electrical cabinet and pump: 10 kW Compressed air for oil injection and pneumatic Water (cold and hot) for cleaning program on-site Maintenance: Replace/renew seals and compression rings once per year Oils/grease the bearings and pump once per month (a maintenance plan including workflow is available) Dimensions of the long egg machine (dismounted without transport box): 1 base frame and block H: 3,050 mm T: 2,600 mm B: 4,000 mm 2. pump frame/stage H: 2,600 ...
Weight approx.: 30 kg Dimensions (l x w x h) approx.: 800 x 500 x 500 mm Description: Clock diameter max. 70 mm, thickness 28 mm, width over clock belt 85 mm, height clock support 75 mm, measuring range -300 to +1000 µm, air compressor JUN-AIR MODELL 6, motor 2.9 A, 2900 rpm, volume flow 0 bar up to 50 l/min, 8 bar 32 l/min
Weight approx.: 50 kg Dimensions (l x w x h) approx.: 900 x 400 x 700 mm Description: Mobile, with spiral hose, pressure indicator defective
182 kW, MTA chiller air-cooled, type: Aries AST 080 SSN "NON FERROUS" M.T.A. S.p.a.. The Aries AST 080 SSN are compact water cooling chillers, which are suitable for outdoor installation (from-10 °C to + 40 °C) with plate evaporator, four scroll compressors, P3 pump, EC fans, incl. Vitaulic clutches and Control Panel. Special version NON FERROUS Suitable for use with aggressive fluids, which react with carbon steel. Cooling capacity (kW): 182 Cold water temperature outlet / inlet (°C): 7 / 12 Flow rate (m3 /h): 31.1 Ambient temperature (°C): 35 Refrigerant circuit: Refrigerant R 410A Circuits (number): 2 Compressor (number): 4 Performance level (%): 0-25-50-75-100 ...
Weight approx.: 250 kg Dimensions (l x w x h) approx.: 900 x 900 x 2400 mm Description: Capacity approx. 750 liters Operating pressure 10 bar Diameter approx. 700 mm Height approx. 1900 mm
For sale exclusively on 21 February 2019 at 10-00 in Cazzago San Martino, Bs Make: Bottarini model: DS15 For more information contact us at + 39 392 4703149 Monday to Friday from 8:30 to 13:00 and from 14:00 to 19:00
Weight approx.: 230 kg Dimensions (l x w x h) approx.: 1000 x 700 x 920 mm Description: Screw compressor, serial number SHO15257 Motor power 11 kW Working pressure 10 Bar Noise level 70 dB Total operating hours according to the counter 12517
Year of construction 1989 Traverse paths x 1,020 mm Y Z 660 mm 660 mm Table load: 200 kg Minimum compressed air 5 bar Air consumption 80 NL/min Weight of 1,650 kg 2,240 mm x 1.455 mm x 2.620 mm
Weight approx.: 450 kg Dimensions (l x w x h) approx.: 1700 x 800 x 1120 mm Description: Rotary vane compressor, serial number 990619 Motor power 22 kW Working pressure 10 Bar Total operating hours according to the counter 37906
Screw compressor Ecoair A15 Manufacturer: Ecoair Type: A15 Year of construction: 1999 Technical data: Final compression pressure of bar Max 8.0 Power consumption of the compressor 11.0 kw Speed 2880 RPM Weight soundproof 227 kg Voltage 400 V Frequency 3/50 Hz
Weight approx.: 170 kg Dimensions (l x w x h) approx.: 700 x 700 x 2000 mm Description: Compressed air tank, serial number 0000278 Capacity 500 liters Operating pressure 10 bar
Screw air compressor CompAir Manufacturer: CompAir Type L15 7, 5A, Model year 2011, CE mark Hours: 4500 Digital PLC control, maximum working pressure 7,5 bar min. Mop5 5.0 bar Ambient temperature + 1 / + 45 ° C Druckluftendtemperartur 11 ° C Noise level 70 dB(A) Drive motor 15 kW Voltage 380 V (50,60 Hz) Full-load current Max 220V / 62A Full-load current Max 400V / 33A Motor protection class: IP55 Nominal speed 3000 1/min Fan cooling flow 47 m³/min Cooling air temperatures over Ã?mgebungstemperatur 20 ° C Total oil flow 9.5 L Compressed air connection EN 10226 RP 1 (DIN 2999-Rp1) Weight approx. 440 kg, dimensions Lxwxh 800 x 670 x 1,160 mm, ...
Weight approx.: 70 kg Dimensions (l x w x h) approx.: 600 x 600 x 800 mm Description: Compressed air dryer, serial number CAI377337 Installed power 1.58 kw Maximum pressure 13 Bar Capacity 5200 l/min
Saw length 1300 mm Saw height 30 mm Blade diameter max. 250 mm Speed blade sufenlos 2000-6000 U/min Saw speed infinitely variable 0-6 m / min Urgent return with attenuation approx. 12 m / min Space, W x D: approx. 2.3 x 1.85 m Weight approx. 0.4 to saw motor 2,2 kW Compressed air connection 6-10 bar Equipment:-infinitely variable speed setting -Infinitely variable feed -Discharge-side table with digital stop, measuring length 1000 mm -pneumatically operated presser with continuous pressure bar -Minimal quantity lubrication system Blade reduction in the return
Weight approx.: 250 kg Dimensions (l x w x h) approx.: 1550 x 600 x 1100 mm Description: Piston compressor, serial number 3276 Motor 2.20 kw Tank capacity 300 liters Tank working pressure 10 bar
Compressor Brand: ATLAS COPCO, type: ZR3 54, year of build: 1990, serial number: ARP 601174, 3000 rpm, power 8 bar, OIL FREE AIR
Weight approx.: 250 kg Dimensions (l x w x h) approx.: 1100 x 800 x 1500 mm Description: Serial number 1204272, suction capacity 128 m³/h, final pressure (absolute pressure) 100 mbar, output electric motor 3 kW, speed 1450 rpm, set up on compressed air vessel OKS, serial number 395938, YOM 1989, capacity 250 l, permitted operating overpressure - 0.99 bar
Technical data: -Saw blade diameter 420 mm -Blade hole 30 mm -maximum cutting length 6000 mm -smallest cutting length 90° + 45 ° 335 mm -See diagram below cutting area -Swivel range to inside pneumatic 90-22.5 ° - tilt range inside pneumatically 90 - 45 ° -Blade rotation speed 2800 RPM -Drive: 400 V / 2 x 4000 Watts -Compressed air supply 7 bar -Air consumption per work cycle - no spray approx. 40 l -with spray approx. 64 l -Space requirement approx. B H 7500 x 1600 X 1600 mm -Weight approx. 1800 kg -with:-control ELUMATEC E 255-A -positioning-controlled cutting-length adjustment with digital display -Yoke swivel and tilt for high and wide pro ...
Weight approx.: 250 kg Dimensions (l x w x h) approx.: 1100 x 800 x 1500 mm Description: Serial number 1196671, suction capacity 140 m³/h, final pressure (absolute pressure) 100 mbar, output electric motor 3 kW, speed 1450 rpm, set up on compressed air vessel OKS, vessel number 39.5851, YOM 1989, capacity 250 l, permitted operating overpressure - 0.99 bar
Volume flow: 1400l/min, connected load: 11kW, operational pressure: 10bar, length: 1000mm, width: 1000mm, height: 1100mm, weight: 200kg, including oil separator, Air Refrigeration Dryer RENNER RKT-CQ 0105: volume flow: 105m³/h, max. operational pressure: 14bar, length: 410mm, width: 360mm, height: 645mm and compressed air tank: capacity: 500l.
Weight approx.: 150 kg Dimensions (l x w x h) approx.: 800 x 600 x 1300 mm Description: Serial number 84007, capacity compressive force 1.5 t, including 1 additional press unit with pressing surface max. 60 x 80 mm, passage 70 mm, the eccentric press has a passage of approx. 165 mm, including foot pedal, control cabinet and further accessories
The machine is designed for eco-friendly removal of paints and contaminants using a spray of baking soda in various granulations. Possibility to use other cleaners - glass, corundum, sand, etc. From the smallest grain granulation (baking soda) to the thickest 2-3 mm. Smooth regulation of cleaning power, with surface smooth and rough, without damage. Waste throws dry and in water-free modes, hydrodynamically and in a water mix. Round nozzles from size # 3 to # 4 and flat nozzles are possible. Construction of a carbon and brass steel cleaner, grooved palette.
Technical data: -maximum cutting force 300 kN -maximum punching diameter up to 88.9 mm -Max that material thickness 6.35 mm -Work area without putting up 1000 x 2000 mm -Actual workspace 1145 x 2100 mm -Work area normally with putting 1000 x 4000 mm -Size work table 1000 x 3500 mm -maximum working speeds of the axes 50 m / min -Max stroke sequence. 320 strokes/min -2 collets min. / max. distance 160-1900 mm -Need for compressed air 6 bar -Power supply 400 V / 15 kW -Space B 4200 x T H 3800 x 2250 mm -Weight approx. 6500 kg -with:-tool station 360-degree rotatable programmable 0.01 ° -CNC control - div. accessories in the separate tool Cabinet
Weight approx.: 450 kg Dimensions (l x w x h) approx.: 1500 x 1700 x 1200 mm Description: 3 HP See photo
Compressor AIRPOL PR75. The device in very good technical and visual condition. Specification: Producer: AIRPOL Model: PR 75 Type: compressor Dimensions: 2200 x 1500 x 1675 ( mm ) Excess pressure [MPa] - execution options: 0.75 / 1.0 / 1.3 Variable performance: Capacity min-max [m3 / h] [1.0 MPa]: 218 - 740... Capacity min-max [m3 / h] [1.0 MPa]: 218 - 740 Capacity min-max [m3 / h] [1.3 MPa]: 212 - 565 Compressed air connection: G 2 Ambient temperature [° C]: +5 ÷ +40 Cooling air demand [m³ / h]: 11700 Temperature of compressed air [° C]: about 10 above ambient temperature Sound level [db (A)]: 75 Transmission mode: direct drive Rated ...
Sawing-, drilling and dowel inserting machine\r\nBrand: Koch\r\nType: Centronic\r\nYear: 2001\r\n\r\nTechnical data:\r\n\r\nWorkpiece dimensions:\r\nLength: 188-1800mm\r\nWidth:\r\n- 20-150mm at 2 workpieces each field\r\n- 100mm at 2 workpieces each field, at 45 °\r\n- 300mm at 1 workpiece each field\r\nThickness: 10-40mm\r\n\r\nStandard equipment:\r\n- 1 Saw unit\r\n2,2 kW, 2800 rpm., saw blade clamp with quick change system, braking device for saw motor\r\nScoring saw 1,5 kW, 2800 U/min\r\n\r\n- 1 horizontal drilling unit\r\n2 kW, driller rotation speed 2800 rpm\r\nwith dowel hole blowing\r\n1 piece dowel hole driller\r\nhorizontal drilling distance over supporting table (Z): max. 50mm\r ...
This listing is for a 2009 ATLAS COPCO ZT 55VSD FF Rotary Screw Air Compressor (Oil-Free). Variable Speed FF model (built in refrigerant air-drier) Module Hours: 73106 Max Working Pressure: 8.4bar Max FAD: 301.9cfm Air Cooled Refrigerant: R404A
Brehmer/Stahl ST-200-stitching line year 1996 6 feeders TAS 300 + 2 hand feeders size max. 480 x 320 mm size min. 155 x 105 mm cover feeder UFA 300 hand feeder HA 200 Hohner 4 stitching heads 52/8 stitching control HKK 200 three knife trimmer TR 200 intercut knives compressors delivery good condition
This listing is for a 2003 ATLAS COPCO ZT50 VSD Rotary Screw Air Compressor (Oil-Free). Variable Speed Running Hours: 52749 Max Working Pressure: 8.6bar Max FAD: 258cfm Air Cooled
Vertical furnace with tableaus ( the Paternoster system, / circulation system spend a predefined time in the oven before the panels can be found on the other side. Currently 2 ovens available! Ideal for hardening off. Nominal temperature 150 °C. Rated power 48 kW Power supply 400V / 50 Hz KVA maximum power supply 53 Compressed air 6 bar Dimensions of the oven: Wxlxh (approx.) 2500mm x 2500mm x 3250mm Approx. 500mm high base. Weight approx. 6to Servormotoren, as well as exhaust air chimneys including. Control Panel is included. All the cables are labeled and unplugged, eliminating a complicated reconnect. Machine is already disassembled and ready for pickup. More d ...
This listing is for 1 of 2 2004 Emicon Compact air cooled chiller with screw compressor and axial fans. LP 16.0 Bar HP 30.0 Bar 12,200 KG